commit dab4e1f06c upstream.
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fbadd83a61 ]
XSK ZC Rx path calculates the size of data that will be posted to XSK Rx
queue via subtracting xdp_buff::data_end from xdp_buff::data.
In bpf_xdp_frags_increase_tail(), when underlying memory type of
xdp_rxq_info is MEM_TYPE_XSK_BUFF_POOL, add offset to data_end in tail
fragment, so that later on user space will be able to take into account
the amount of bytes added by XDP program.
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-10-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53e380d214 ]
As prep for adding unix socket support to the cgroup sockaddr hooks,
let's add a kfunc bpf_sock_addr_set_sun_path() that allows modifying a unix
sockaddr from bpf. While this is already possible for AF_INET and AF_INET6,
we'll need this kfunc when we add unix socket support since modifying the
address for those requires modifying both the address and the sockaddr
length.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-4-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c5114710c8 ("xsk: fix usage of multi-buffer BPF helpers for ZC XDP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9aefde5b ]
Curr pointer should be updated when the sg structure is shifted.
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024ee930cb ]
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).
Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).
Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d83 ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.
The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:
sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed
Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.
Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.
Fixes: 8e368dc72e ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-7-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The semantics for bpf_sk_assign are as follows:
sk = some_lookup_func()
bpf_sk_assign(skb, sk)
bpf_sk_release(sk)
That is, the sk is not consumed by bpf_sk_assign. The function
therefore needs to make sure that sk lives long enough to be
consumed from __inet_lookup_skb. The path through the stack for a
TCPv4 packet is roughly:
netif_receive_skb_core: takes RCU read lock
__netif_receive_skb_core:
sch_handle_ingress:
tcf_classify:
bpf_sk_assign()
deliver_ptype_list_skb:
deliver_skb:
ip_packet_type->func == ip_rcv:
ip_rcv_core:
ip_rcv_finish_core:
dst_input:
ip_local_deliver:
ip_local_deliver_finish:
ip_protocol_deliver_rcu:
tcp_v4_rcv:
__inet_lookup_skb:
skb_steal_sock
The existing helper takes advantage of the fact that everything
happens in the same RCU critical section: for sockets with
SOCK_RCU_FREE set bpf_sk_assign never takes a reference.
skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put
if necessary.
This approach assumes that SOCK_RCU_FREE is never set on a sk
between bpf_sk_assign and skb_steal_sock, but this invariant is
violated by unhashed UDP sockets. A new UDP socket is created
in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only
added in udp_lib_get_port() which happens when a socket is bound.
When bpf_sk_assign was added it wasn't possible to access unhashed
UDP sockets from BPF, so this wasn't a problem. This changed
in commit 0c48eefae7 ("sock_map: Lift socket state restriction
for datagram sockets"), but the helper wasn't adjusted accordingly.
The following sequence of events will therefore lead to a refcount
leak:
1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since
SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to
SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().
Fix the problem by rejecting unhashed sockets in bpf_sk_assign().
This matches the behaviour of __inet_lookup_skb which is ultimately
the goal of bpf_sk_assign().
Fixes: cf7fbe660f ("bpf: Add socket assign support")
Cc: Joe Stringer <joe@cilium.io>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-2-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add multi-buffer support for AF_XDP by extending the XDP multi-buffer
support to be reflected in user-space when a packet is redirected to
an AF_XDP socket.
In the XDP implementation, the NIC driver builds the xdp_buff from the
first frag of the packet and adds any subsequent frags in the skb_shinfo
area of the xdp_buff. In AF_XDP core, XDP buffers are allocated from
xdp_sock's pool and data is copied from the driver's xdp_buff and frags.
Once an allocated XDP buffer is full and there is still data to be
copied, the 'XDP_PKT_CONTD' flag in'options' field of the corresponding
xdp ring descriptor is set and passed to the application. When application
sees the aforementioned flag set it knows there is pending data for this
packet that will be carried in the following descriptors. If there is no
more data to be copied, the flag in 'options' field is cleared for that
descriptor signalling EOP to the application.
If application reads a batch of descriptors using for example the libxdp
interfaces, it is not guaranteed that the batch will end with a full
packet. It might end in the middle of a packet and the rest of the frames
of that packet will arrive at the beginning of the next batch.
AF_XDP ensures that only a complete packet (along with all its frags) is
sent to application.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-6-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When calling bpf_sk_lookup_tcp(), bpf_sk_lookup_udp() or
bpf_skc_lookup_tcp() from tc/xdp ingress, VRF socket bindings aren't
respoected, i.e. unbound sockets are returned, and bound sockets aren't
found.
VRF binding is determined by the sdif argument to sk_lookup(), however
when called from tc the IP SKB control block isn't initialized and thus
inet{,6}_sdif() always returns 0.
Fix by calculating sdif for the tc/xdp flows by observing the device's
l3 enslaved state.
The cg/sk_skb hooking points which are expected to support
inet{,6}_sdif() pass sdif=-1 which makes __bpf_skc_lookup() use the
existing logic.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20230621104211.301902-4-gilad9366@gmail.com
skb->dev always exists in the tc flow. There is no need to use
bpf_skc_lookup(), bpf_sk_lookup() from this code path.
This change facilitates fixing the tc flow to be VRF aware.
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-3-gilad9366@gmail.com
Change BPF helper socket lookup functions to use TC specific variants:
bpf_tc_sk_lookup_tcp() / bpf_tc_sk_lookup_udp() / bpf_tc_skc_lookup_tcp()
instead of sharing implementation with the cg / sk_skb hooking points.
This allows introducing a separate logic for the TC flow.
The tc functions are identical to the original code.
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-2-gilad9366@gmail.com
Currently we observed a significant performance degradation in
samples/bpf xdp1 and xdp2, due XDP multibuffer "xdp.frags" handling,
added in commit 7722517422 ("samples/bpf: fixup some tools to be able
to support xdp multibuffer").
This patch reduce the overhead by avoiding to read/load shared_info
(sinfo) memory area, when XDP packet don't have any frags. This improves
performance because sinfo is located in another cacheline.
Function bpf_xdp_pointer() is used by BPF helpers bpf_xdp_load_bytes()
and bpf_xdp_store_bytes(). As a help to reviewers, xdp_get_buff_len() can
potentially access sinfo, but it uses xdp_buff_has_frags() flags bit check
to avoid accessing sinfo in no-frags case.
The likely/unlikely instrumentation lays out asm code such that sinfo
access isn't interleaved with no-frags case (checked on GCC 12.2.1-4).
The generated asm code is more compact towards the no-frags case.
The BPF kfunc bpf_dynptr_slice() also use bpf_xdp_pointer(). Thus, it
should also take effect for that.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/168563651438.3436004.17735707525651776648.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.
A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.
When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.
If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.
The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.
This functionality is useful in containerized environments.
For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.
This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.
As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.
When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
The socket destroy kfunc is used to forcefully terminate sockets from
certain BPF contexts. We plan to use the capability in Cilium
load-balancing to terminate client sockets that continue to connect to
deleted backends. The other use case is on-the-fly policy enforcement
where existing socket connections prevented by policies need to be
forcefully terminated. The kfunc also allows terminating sockets that may
or may not be actively sending traffic.
The kfunc can currently be called only from BPF TCP and UDP iterators
where users can filter, and terminate selected sockets. More
specifically, it can only be called from BPF contexts that ensure
socket locking in order to allow synchronous execution of protocol
specific `diag_destroy` handlers. The previous commit that batches UDP
sockets during iteration facilitated a synchronous invocation of the UDP
destroy callback from BPF context by skipping socket locks in
`udp_abort`. TCP iterator already supported batching of sockets being
iterated. To that end, `tracing_iter_filter` callback filter is added so
that verifier can restrict the kfunc to programs with `BPF_TRACE_ITER`
attach type, and reject other programs.
The kfunc takes `sock_common` type argument, even though it expects, and
casts them to a `sock` pointer. This enables the verifier to allow the
sock_destroy kfunc to be called for TCP with `sock_common` and UDP with
`sock` structs. Furthermore, as `sock_common` only has a subset of
certain fields of `sock`, casting pointer to the latter type might not
always be safe for certain sockets like request sockets, but these have a
special handling in the diag_destroy handlers.
Additionally, the kfunc is defined with `KF_TRUSTED_ARGS` flag to avoid the
cases where a `PTR_TO_BTF_ID` sk is obtained by following another pointer.
eg. getting a sk pointer (may be even NULL) by following another sk
pointer. The pointer socket argument passed in TCP and UDP iterators is
tagged as `PTR_TRUSTED` in {tcp,udp}_reg_info. The TRUSTED arg changes
are contributed by Martin KaFai Lau <martin.lau@kernel.org>.
Signed-off-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20230519225157.760788-8-aditi.ghag@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In one of our internal testing, we found a case where
- uapi struct bpf_tcp_sock is in vmlinux.h where vmlinux.h is not
generated from the testing kernel
- struct bpf_tcp_sock is not in vmlinux BTF
The above combination caused bpf load failure as the following
memory access
struct bpf_tcp_sock *tcp_sock = ...;
... tcp_sock->snd_cwnd ...
needs CORE relocation but the relocation cannot be resolved since
the kernel BTF does not have corresponding type.
Similar to other previous cases (nf_conn___init, tcp6_sock, mctcp_sock, etc.),
add the type to vmlinux BTF with BTF_EMIT_TYPE macro.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230502180543.1832140-1-yhs@fb.com
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c65 ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f4 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc4 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cde ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a816 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers
perform run-time check that sk|inode|task|cgrp pointer != NULL.
Teach verifier about this fact and allow bpf programs to pass
PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers.
It will be used in the subsequent patch that will do
bpf_sk_storage_get(.., skb->sk, ...);
Even when 'skb' pointer is trusted the 'sk' pointer may be NULL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-5-alexei.starovoitov@gmail.com
Remove duplicated if (atype == BPF_READ) btf_struct_access() from
btf_struct_access() callback and invoke it only for writes. This is
possible to do because currently btf_struct_access() custom callback
always delegates to generic btf_struct_access() helper for BPF_READ
accesses.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-2-alexei.starovoitov@gmail.com
rcu_bh is no longer a win, especially for objects freed
with standard call_rcu().
Switch neighbour code to no longer disable BH when not necessary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vlan_present is gone since
commit 354259fa73 ("net: remove skb->vlan_present")
rename the offset field to what BPF is currently looking
for in this byte - mono_delivery_time and tc_at_ingress.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
We have many lockless accesses to n->nud_state.
Before adding another one in the following patch,
add annotations to readers and writers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lift verifier restriction to use BPF_ST_MEM instructions to write to
context data structures. This requires the following changes:
- verifier.c:do_check() for BPF_ST updated to:
- no longer forbid writes to registers of type PTR_TO_CTX;
- track dst_reg type in the env->insn_aux_data[...].ptr_type field
(same way it is done for BPF_STX and BPF_LDX instructions).
- verifier.c:convert_ctx_access() and various callbacks invoked by
it are updated to handled BPF_ST instruction alongside BPF_STX.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230304011247.566040-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These helpers are safe to call from any context and there's no reason to
restrict access to them. Remove them from bpf_trace and filter lists and add
to bpf_base_func_proto() under perfmon_capable().
v2: After consulting with Andrii, relocated in bpf_base_func_proto() so that
they require bpf_capable() but not perfomon_capable() as it doesn't read
from or affect others on the system.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/ZAD8QyoszMZiTzBY@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
The user must pass in a buffer to store the contents of the data slice
if a direct pointer to the data cannot be obtained.
For skb and xdp type dynptrs, these two APIs are the only way to obtain
a data slice. However, for other types of dynptrs, there is no
difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data.
For skb type dynptrs, the data is copied into the user provided buffer
if any of the data is not in the linear portion of the skb. For xdp type
dynptrs, the data is copied into the user provided buffer if the data is
between xdp frags.
If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then
the skb will be uncloned (see bpf_unclone_prologue()).
Please note that any bpf_dynptr_write() automatically invalidates any prior
data slices of the skb dynptr. This is because the skb may be cloned or
may need to pull its paged buffer into the head. As such, any
bpf_dynptr_write() will automatically have its prior data slices
invalidated, even if the write is to data in the skb head of an uncloned
skb. Please note as well that any other helper calls that change the
underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data
slices of the skb dynptr as well, for the same reasons.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xdp dynptrs, which are dynptrs whose underlying pointer points
to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of xdp->data and xdp->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For reads and writes on the dynptr, this includes reading/writing
from/to and across fragments. Data slices through the bpf_dynptr_data
API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() should be used.
For examples of how xdp dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add skb dynptrs, which are dynptrs whose underlying pointer points
to a skb. The dynptr acts on skb data. skb dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of skb->data and skb->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For bpf prog types that don't support writes on skb data, the dynptr is
read-only (bpf_dynptr_write() will return an error)
For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write()
interfaces, reading and writing from/to data in the head as well as from/to
non-linear paged buffers is supported. Data slices through the
bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used.
For examples of how skb dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
The bpf_fib_lookup() helper does not only look up the fib (ie. route)
but it also looks up the neigh. Before returning the neigh, the helper
does not check for NUD_VALID. When a neigh state (neigh->nud_state)
is in NUD_FAILED, its dmac (neigh->ha) could be all zeros. The helper
still returns SUCCESS instead of NO_NEIGH in this case. Because of the
SUCCESS return value, the bpf prog directly uses the returned dmac
and ends up filling all zero in the eth header.
This patch checks for NUD_VALID and returns NO_NEIGH if the neigh is
not valid.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217004150.2980689-3-martin.lau@linux.dev
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RqJgAKCRDbK58LschI
gw2IAP9G5uhFO5abBzYLupp6SY3T5j97MUvPwLfFqUEt7EXmuwEA2lCUEWeW0KtR
QX+QmzCa6iHxrW7WzP4DUYLue//FJQY=
=yYqA
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resolve an issue when calling sol_tcp_sockopt() on a socket with ktls
enabled. Prior to this patch, sol_tcp_sockopt() would only allow calls
if the function pointer of setsockopt of the socket was set to
tcp_setsockopt(). However, any socket with ktls enabled would have its
function pointer set to tls_setsockopt(). To resolve this issue, the
patch adds a check of the protocol of the linux socket and allows
bpf_setsockopt() to be called if ktls is initialized on the linux
socket. This ensures that calls to sol_tcp_sockopt() will succeed on
sockets with ktls enabled.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230125201608.908230-2-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF offloading infra will be reused to implement
bound-but-not-offloaded bpf programs. Rename existing
helpers for clarity. No functional changes.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the
new IP header version after decapsulating the outer IP header.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The variable 'insn' is initialized to 'insn_buf' without being changed, only
some helper macros are defined, so the insn buffer comparison is unnecessary.
Just remove it. This missed removal back in 2377b81de5 ("bpf: split shared
bpf_tcp_sock and bpf_sock_ops implementation").
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230108151258.96570-1-haiyue.wang@intel.com
Anand hit a BUG() when pulling off headers on egress to a SW tunnel.
We get to skb_checksum_help() with an invalid checksum offset
(commit d7ea0d9df2 ("net: remove two BUG() from skb_checksum_help()")
converted those BUGs to WARN_ONs()).
He points out oddness in how skb_postpull_rcsum() gets used.
Indeed looks like we should pull before "postpull", otherwise
the CHECKSUM_PARTIAL fixup from skb_postpull_rcsum() will not
be able to do its job:
if (skb->ip_summed == CHECKSUM_PARTIAL &&
skb_checksum_start_offset(skb) < 0)
skb->ip_summed = CHECKSUM_NONE;
Reported-by: Anand Parthasarathy <anpartha@meta.com>
Fixes: 6578171a7f ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221220004701.402165-1-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch allows to remove TUNNEL_KEY from the tunnel flags bitmap
when using bpf_skb_set_tunnel_key by providing a BPF_F_NO_TUNNEL_KEY
flag. On egress, the resulting tunnel header will not contain a tunnel
key if the protocol and implementation supports it.
At the moment bpf_tunnel_key wants a user to specify a numeric tunnel
key. This will wrap the inner packet into a tunnel header with the key
bit and value set accordingly. This is problematic when using a tunnel
protocol that supports optional tunnel keys and a receiving tunnel
device that is not expecting packets with the key bit set. The receiver
won't decapsulate and drop the packet.
RFC 2890 and RFC 2784 GRE tunnels are examples where this flag is
useful. It allows for generating packets, that can be decapsulated by
a GRE tunnel device not operating in collect metadata mode or not
expecting the key bit set.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221218051734.31411-1-cehrig@cloudflare.com
This change adds xfrm metadata helpers using the unstable kfunc call
interface for the TC-BPF hooks. This allows steering traffic towards
different IPsec connections based on logic implemented in bpf programs.
This object is built based on the availability of BTF debug info.
When setting the xfrm metadata, percpu metadata dsts are used in order
to avoid allocating a metadata dst per packet.
In order to guarantee safe module unload, the percpu dsts are allocated
on first use and never freed. The percpu pointer is stored in
net/core/filter.c so that it can be reused on module reload.
The metadata percpu dsts take ownership of the original skb dsts so
that they may be used as part of the xfrm transmission logic - e.g.
for MTU calculations.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-3-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The bpf_ct_set_nat_info() kfunc is defined in the nf_nat.ko module, and
takes as a parameter the nf_conn___init struct, which is allocated through
the bpf_xdp_ct_alloc() helper defined in the nf_conntrack.ko module.
However, because kernel modules can't deduplicate BTF types between each
other, and the nf_conn___init struct is not referenced anywhere in vmlinux
BTF, this leads to two distinct BTF IDs for the same type (one in each
module). This confuses the verifier, as described here:
https://lore.kernel.org/all/87leoh372s.fsf@toke.dk/
As a workaround, add an explicit BTF_TYPE_EMIT for the type in
net/filter.c, so the type definition gets included in vmlinux BTF. This
way, both modules can refer to the same type ID (as they both build on top
of vmlinux BTF), and the verifier is no longer confused.
v2:
- Use BTF_TYPE_EMIT (which is a statement so it has to be inside a function
definition; use xdp_func_proto() for this, since this is mostly
xdp-related).
Fixes: 820dc0523e ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221201123939.696558-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY4AC5QAKCRDbK58LschI
g1e0AQCfAqduTy7mYd02jDNCV0wLphNp9FbPiP9OrQT37ABpKAEA1ulj1X59bX3d
HnZdDKuatcPZT9MV5hDLM7MFJ9GjOA4=
=fNmM
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid potentially breaking existing users.
Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).
Fixes: fd18942244 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Martynas Pumputis