Bruno Thomsen b838b4aced phy/micrel: KSZ8031RNL RMII clock reconfiguration bug ... Bug: Unable to send and receive Ethernet packets with Micrel PHY. Affected devices: KSZ8031RNL (commercial temp) KSZ8031RNLI (industrial temp) Description: PHY device is correctly detected during probe. PHY power-up default is 25MHz crystal clock input and output 50MHz RMII clock to MAC. Reconfiguration of PHY to input 50MHz RMII clock from MAC causes PHY to become unresponsive if clock source is changed after Operation Mode Strap Override (OMSO) register setup. Cause: Long lead times on parts where clock setup match circuit design forces the usage of similar parts with wrong default setup. Solution: Swapped KSZ8031 register setup and added phy_write return code validation. Tested with Freescale i.MX28 Fast Ethernet Controler (fec). Signed-off-by: Bruno Thomsen <bth@kamstrup.dk> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-10-14 12:41:03 -04:00
..
amd-xgbe-phy.c	amd-xgbe-phy: Fix build break for missing declaration	2014-09-07 11:21:31 -07:00
amd.c
at803x.c	net: phy: at803x: fix coccinelle warnings	2014-06-22 17:16:02 -07:00
bcm7xxx.c	net: phy: add BCM7425 and BCM7429 PHYs	2014-10-01 22:12:48 -04:00
bcm63xx.c
bcm87xx.c
broadcom.c	net: phy: broadcom: move shadow 0x1C register accessors to brcmphy.h	2014-08-23 11:38:53 -07:00
cicada.c	net: phy: cicada: fix checkpath errors	2013-12-18 00:49:01 -05:00
davicom.c	net: phy: davicom: fix checkpath errors	2013-12-18 00:49:01 -05:00
dp83640.c	dp83640: Make use of skb_queue_purge instead of reimplementing the code	2014-09-08 14:24:35 -07:00
dp83640_reg.h
et1011c.c
fixed.c	net: phy: adjust fixed_phy_register() return value	2014-10-07 13:06:45 -04:00
icplus.c	net: phy: icplus: fix checkpath error	2013-12-18 00:49:02 -05:00
Kconfig	drivers/net/phy/Kconfig: Let MDIO_BCM_UNIMAC depend on HAS_IOMEM	2014-10-06 00:46:27 -04:00
lxt.c	net: phy: lxt: fix checkpath errors	2013-12-18 00:49:02 -05:00
Makefile	net: phy: add generic UniMAC MDIO bus driver	2014-08-27 22:59:39 -07:00
marvell.c	net: phy: marvell: provide genphy suspend/resume	2013-12-17 14:42:44 -05:00
mdio-bcm-unimac.c	net: phy: mdio-bcm-unimac: NULL-terminate unimac_mdio_ids	2014-09-01 20:41:45 -07:00
mdio-bitbang.c
mdio-gpio.c	net: mdio-gpio: warn about missing bus alias id	2014-05-09 15:51:19 -04:00
mdio-moxart.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux.c
mdio-octeon.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-sun4i.c	net: sun4i: remove empty MDIO bus reset function	2014-03-28 01:38:02 -04:00
mdio_bus.c	net: phy: properly report internal PHYs through sysfs	2014-08-29 20:17:53 -07:00
micrel.c	phy/micrel: KSZ8031RNL RMII clock reconfiguration bug	2014-10-14 12:41:03 -04:00
national.c
phy.c	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2014-09-07 21:41:53 -07:00
phy_device.c	phylib: use MDIO_DEVS[12]	2014-08-22 21:16:51 -07:00
qsemi.c
realtek.c	net: phy: realtek: register/unregister multiple drivers properly	2014-06-11 15:17:27 -07:00
smsc.c	net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function	2014-08-16 20:15:54 -07:00
spi_ks8995.c	net: phy: spi_ks8995: Introduce the use of devm_kzalloc	2014-08-04 12:55:23 -07:00
ste10Xp.c
vitesse.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00