linux-stable/arch/arm/mach-imx
Arnd Bergmann b4042a4c01 ARM: imx: select ARM_CPU_SUSPEND only for imx6
i.MX only needs to select ARM_CPU_SUSPEND manually for the
very specific case that CONFIG_PM_SLEEP is disabled and imx6
is used with CONFIG_PM enabled for runtime PM.

If we are building a kernel only for CPUs that are not using
the cpu_suspend() helper, we otherwise get a harmless
build warning:

warning: (ARCH_MXC && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM &&
EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)

This moves the option to the SOC_IMX6 option that actually
requires it, in effect reverting commit f36b594f37 ("ARM:
mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level") that was
meant as a cleanup and unintentionally caused this warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-28 11:18:27 +08:00
..
devices [media] move media platform data to linux/platform_data/media 2015-11-19 08:09:38 -02:00
3ds_debugboard.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
3ds_debugboard.h
anatop.c ARM: imx: Add msl code support for imx6qp 2016-02-14 11:07:17 +08:00
avic.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
board-mx31lilly.h
board-mx31lite.h
board-mx31moboard.h
common.h ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
cpu-imx5.c ARM: imx5: retrieve iim base from device tree 2014-07-18 16:10:07 +08:00
cpu-imx25.c ARM: mx25: Retrieve IIM base from dt 2015-03-13 22:06:35 +08:00
cpu-imx27.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx35.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpuidle-imx5.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle-imx6q.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sl.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sx.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle.h ARM: imx: support arm power off in cpuidle for i.mx6sx 2015-01-05 21:34:29 +08:00
crmregs-imx3.h
devices-imx1.h
devices-imx21.h
devices-imx27.h
devices-imx31.h
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
ehci-imx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx31.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci.h ARM: imx5: remove imx51 non-DT support files 2014-07-18 16:10:05 +08:00
epit.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
eukrea-baseboards.h ARM: i.MX: Remove mach-cpuimx27sd board file 2014-09-01 22:00:01 +08:00
gpc.c ARM: imx: add platform irq type setting in gpc 2015-11-23 13:12:07 +08:00
hardware.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
headsmp.S ARM: imx: enable big endian mode 2016-02-02 13:31:19 +08:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h
imx1-dt.c ARM: i.MX1: Add devicetree support 2014-09-16 10:06:44 +08:00
imx27-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
imx31-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
imx35-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
iomux-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-mx1.h
iomux-mx2x.h
iomux-mx3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
iomux-mx21.h
iomux-mx27.h
iomux-mx35.h
iomux-v1.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v1.h
iomux-v3.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
irq-common.c ARM: imx: irq-common: Include header to avoid sparse warning 2013-06-17 15:45:14 +08:00
irq-common.h ARM: imx: drop support for irq priorisation 2013-12-09 13:18:25 +08:00
Kconfig ARM: imx: select ARM_CPU_SUSPEND only for imx6 2016-02-28 11:18:27 +08:00
mach-apf9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-armadillo5x0.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-bug.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-imx6q.c ARM: imx: Add msl code support for imx6qp 2016-02-14 11:07:17 +08:00
mach-imx6sl.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6sx.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6ul.c mach-imx/mach-imx6ul.c: proper constness with __initconst 2015-11-25 11:06:52 +08:00
mach-imx7d.c ARM: imx: enable cpufreq device on i.mx7d 2015-12-02 13:38:03 +08:00
mach-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
mach-imx27_visstrim_m10.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-imx50.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
mach-imx51.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-imx53.c ARM: SoC platform changes for 3.19 2014-12-09 14:38:28 -08:00
mach-kzm_arm11_01.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-ls1021a.c ARM: imx: Add Freescale LS1021A SMP support 2014-11-23 14:56:21 +08:00
mach-mx21ads.c gpio: generic: factor into gpio_chip struct 2016-01-05 11:21:00 +01:00
mach-mx27_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx27ads.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-mx31_3ds.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31ads.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-mx31lilly.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31lite.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31moboard.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-mx35_3ds.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-pca100.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm037.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-pcm037_eet.c
mach-pcm043.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-qong.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
mach-scb9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-vf610.c ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mach-vpr200.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
Makefile ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
Makefile.boot ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mm-imx1.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx3.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-07-03 09:46:29 -07:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx27.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mmdc.c ARM: imx: mmdc: Include "common.h" header file 2015-06-03 14:49:34 +08:00
mx1.h
mx2x.h
mx3x.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx21.h
mx27.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx31.h
mx31lilly-db.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mx31lite-db.c
mx31moboard-devboard.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-marxbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-smartbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx35.h
mxc.h ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pcm037.h
platsmp.c ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
pm-imx3.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pm-imx5.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pm-imx6.c ARM: imx6: fix cleanup path in imx6q_suspend_init() 2016-01-28 16:31:45 +08:00
pm-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
pm-imx27.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
src.c ARM: imx: remove imx_src_prepare_restart() call 2013-11-11 22:58:43 +08:00
ssi-fiq-ksym.c
ssi-fiq.S
suspend-imx6.S ARM: imx: add suspend/resume support for i.mx6ul 2015-09-17 08:54:35 +08:00
suspend-imx53.S ARM: imx53: Set DDR pins to high impedance when in suspend to RAM. 2015-06-03 14:49:36 +08:00
system.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
tzic.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00