mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-29 04:09:39 +00:00
e35a4a4e13
* Replace the expert mode symbols with a single helper
* Fix misuses of of_match_ptr()
* Remove partid and partname debugfs files
* tests: Fix eraseblock read speed miscalculation for lower partition sizes
* TRX parser: Allow to use on MediaTek MIPS SoCs
MTD driver changes:
* spear_smi: use GFP_KERNEL
* mchp48l640: Add SPI ID table
* mchp23k256: Add SPI ID table
* blkdevs: Avoid soft lockups with some mtd/spi devices
* aspeed-smc: Improve probe resilience
Hyperbus changes:
* HBMC_AM654 should depend on ARCH_K3
NAND core changes:
* ECC:
- Add infrastructure to support hardware engines
- Add a new helper to retrieve the ECC context
- Provide a helper to retrieve a pilelined engine device
NAND-ECC changes:
* Macronix ECC engine:
- Add Macronix external ECC engine support
- Support SPI pipelined mode
- Make two read-only arrays static const
- Fix compile test issue
Raw NAND core changes:
* Fix misuses of of_match_node()
* Rework of_get_nand_bus_width()
* Remove of_get_nand_on_flash_bbt() wrapper
* Protect access to rawnand devices while in suspend
* bindings: Document the wp-gpios property
Rax NAND controller driver changes:
* atmel: Fix refcount issue in atmel_nand_controller_init
* nandsim:
- Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
- Merge repeat codes in ns_switch_state
- Replace overflow check with kzalloc to single kcalloc
* rockchip: Fix platform_get_irq.cocci warning
* stm32_fmc2: Add NAND Write Protect support
* pl353: Set the nand chip node as the flash node
* brcmnand: Fix sparse warnings in bcma_nand
* omap_elm: Remove redundant variable 'errors'
* gpmi:
- Support fast edo timings for mx28
- Validate controller clock rate
- Fix controller timings setting
* brcmnand:
- Add BCMA shim
- BCMA controller uses command shift of 0
- Allow platform data instantation
- Add platform data structure for BCMA
- Allow working without interrupts
- Move OF operations out of brcmnand_init_cs()
- Avoid pdev in brcmnand_init_cs()
- Allow SoC to provide I/O operations
- Assign soc as early as possible
Onenand changes:
* Check for error irq
SPI-NAND core changes:
* Delay a little bit the dirmap creation
* Create direct mapping descriptors for ECC operations
SPI-NAND driver changes:
* macronix: Use random program load
SPI NOR core changes:
* Move vendor specific code out of the core into vendor drivers.
* Unify all function and object names in the vendor modules.
* Make setup() callback optional to improve readability.
* Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
SPI changes:
* Macronix SPI controller:
- Fix the transmit path
- Create a helper to configure the controller before an operation
- Create a helper to ease the start of an operation
- Add support for direct mapping
- Add support for pipelined ECC operations
* spi-mem:
- Introduce a capability structure
- Check the controller extra capabilities
- cadence-quadspi/mxic: Provide capability structures
- Kill the spi_mem_dtr_supports_op() helper
- Add an ecc parameter to the spi_mem_op structure
Binding changes:
* Dropped mtd/cortina,gemini-flash.txt
* Convert BCM47xx partitions to json-schema
* Vendor prefixes: Clarify Macronix prefix
* SPI NAND: Convert spi-nand description file to yaml
* Raw NAND chip: Create a NAND chip description
* Raw NAND controller:
- Harmonize the property types
- Fix a comment in the examples
- Fix the reg property description
* Describe Macronix NAND ECC engine
* Macronix SPI controller:
- Document the nand-ecc-engine property
- Convert to yaml
- The interrupt property is not mandatory
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmI7WJcACgkQJWrqGEe9
VoSzpAgAutzRv9TRUiXdBGGlJ851QaZ6ZUvT1bHKTQA+xZi+MZyNmc0cWNg3B70I
PnwyxNAmRkUQKwV5Vgy/sQrt42qZnPmr+8XMq+UiziPmgFdjiTdLqGcN619Hi12t
JqtoKL828R064LSEq5nWsJ2waoGT1nNtZK8kA2qe8ctvmH0YTThriVZUQR4/Befb
OGFheceLFycE/vkktPPr3As4603fMiyDOT7EA3Mtzgjohry0a0TqoakHCaHC/fYo
0/h+x+jJATPtgbWm1ZiV3cZ/Su00+rKuQOsiAWvM/pqDaijsVntBmtK0PRtums2Q
m8LCspuQYNnCINeQXqba9RxACpibDg==
=+6Zk
-----END PGP SIGNATURE-----
Merge tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"There has been a lot of activity in the MTD subsystem recently, with a
number of SPI-NOR cleanups as well as the introduction of ECC engines
that can be used by SPI controllers (hence a few SPI patches in here).
Core MTD changes:
- Replace the expert mode symbols with a single helper
- Fix misuses of of_match_ptr()
- Remove partid and partname debugfs files
- tests: Fix eraseblock read speed miscalculation for lower partition
sizes
- TRX parser: Allow to use on MediaTek MIPS SoCs
MTD driver changes:
- spear_smi: use GFP_KERNEL
- mchp48l640: Add SPI ID table
- mchp23k256: Add SPI ID table
- blkdevs: Avoid soft lockups with some mtd/spi devices
- aspeed-smc: Improve probe resilience
Hyperbus changes:
- HBMC_AM654 should depend on ARCH_K3
NAND core changes:
- ECC:
- Add infrastructure to support hardware engines
- Add a new helper to retrieve the ECC context
- Provide a helper to retrieve a pilelined engine device
NAND-ECC changes:
- Macronix ECC engine:
- Add Macronix external ECC engine support
- Support SPI pipelined mode
- Make two read-only arrays static const
- Fix compile test issue
Raw NAND core changes:
- Fix misuses of of_match_node()
- Rework of_get_nand_bus_width()
- Remove of_get_nand_on_flash_bbt() wrapper
- Protect access to rawnand devices while in suspend
- bindings: Document the wp-gpios property
Rax NAND controller driver changes:
- atmel: Fix refcount issue in atmel_nand_controller_init
- nandsim:
- Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
- Merge repeat codes in ns_switch_state
- Replace overflow check with kzalloc to single kcalloc
- rockchip: Fix platform_get_irq.cocci warning
- stm32_fmc2: Add NAND Write Protect support
- pl353: Set the nand chip node as the flash node
- brcmnand: Fix sparse warnings in bcma_nand
- omap_elm: Remove redundant variable 'errors'
- gpmi:
- Support fast edo timings for mx28
- Validate controller clock rate
- Fix controller timings setting
- brcmnand:
- Add BCMA shim
- BCMA controller uses command shift of 0
- Allow platform data instantation
- Add platform data structure for BCMA
- Allow working without interrupts
- Move OF operations out of brcmnand_init_cs()
- Avoid pdev in brcmnand_init_cs()
- Allow SoC to provide I/O operations
- Assign soc as early as possible
Onenand changes:
- Check for error irq
SPI-NAND core changes:
- Delay a little bit the dirmap creation
- Create direct mapping descriptors for ECC operations
SPI-NAND driver changes:
- macronix: Use random program load
SPI NOR core changes:
- Move vendor specific code out of the core into vendor drivers.
- Unify all function and object names in the vendor modules.
- Make setup() callback optional to improve readability.
- Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
SPI changes:
- Macronix SPI controller:
- Fix the transmit path
- Create a helper to configure the controller before an operation
- Create a helper to ease the start of an operation
- Add support for direct mapping
- Add support for pipelined ECC operations
- spi-mem:
- Introduce a capability structure
- Check the controller extra capabilities
- cadence-quadspi/mxic: Provide capability structures
- Kill the spi_mem_dtr_supports_op() helper
- Add an ecc parameter to the spi_mem_op structure
Binding changes:
- Dropped mtd/cortina,gemini-flash.txt
- Convert BCM47xx partitions to json-schema
- Vendor prefixes: Clarify Macronix prefix
- SPI NAND: Convert spi-nand description file to yaml
- Raw NAND chip: Create a NAND chip description
- Raw NAND controller:
- Harmonize the property types
- Fix a comment in the examples
- Fix the reg property description
- Describe Macronix NAND ECC engine
- Macronix SPI controller:
- Document the nand-ecc-engine property
- Convert to yaml
- The interrupt property is not mandatory"
* tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits)
mtd: nand: ecc: mxic: Fix compile test issue
mtd: nand: mxic-ecc: make two read-only arrays static const
mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3
mtd: core: Remove partid and partname debugfs files
dt-bindings: mtd: partitions: convert BCM47xx to the json-schema
mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
mtd: rawnand: rockchip: fix platform_get_irq.cocci warning
mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set
mtd: spi-nor: renumber flags
mtd: spi-nor: slightly change code style in spi_nor_sr_ready()
mtd: spi-nor: spansion: rename vendor specific functions and defines
mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag
mtd: spi-nor: move all spansion specifics into spansion.c
mtd: spi-nor: spansion: slightly rework control flow in late_init()
mtd: spi-nor: micron-st: rename vendor specific functions and defines
mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag
mtd: spi-nor: move all micron-st specifics into micron-st.c
mtd: spi-nor: xilinx: correct the debug message
mtd: spi-nor: xilinx: rename vendor specific functions and defines
...
|
||
|---|---|---|
| .. | ||
| gpio | ||
| media | ||
| txx9 | ||
| x86 | ||
| ad5449.h | ||
| ad5761.h | ||
| ad7266.h | ||
| ad7791.h | ||
| ad7793.h | ||
| ad7887.h | ||
| adau17x1.h | ||
| adp5588.h | ||
| adp8860.h | ||
| adp8870.h | ||
| ads7828.h | ||
| ams-delta-fiq.h | ||
| apds990x.h | ||
| arm-ux500-pm.h | ||
| asoc-imx-ssi.h | ||
| asoc-kirkwood.h | ||
| asoc-palm27x.h | ||
| asoc-s3c.h | ||
| asoc-s3c24xx_simtec.h | ||
| asoc-ti-mcbsp.h | ||
| asoc-ux500-msp.h | ||
| ata-pxa.h | ||
| ata-samsung_cf.h | ||
| atmel.h | ||
| b53.h | ||
| bcm7038_wdt.h | ||
| bcmgenet.h | ||
| bd6107.h | ||
| bh1770glc.h | ||
| brcmfmac.h | ||
| brcmnand.h | ||
| clk-da8xx-cfgchip.h | ||
| clk-davinci-pll.h | ||
| clk-fch.h | ||
| clk-s3c2410.h | ||
| cpuidle-exynos.h | ||
| cros_ec_chardev.h | ||
| cros_ec_commands.h | ||
| cros_ec_proto.h | ||
| cros_ec_sensorhub.h | ||
| cros_usbpd_notify.h | ||
| crypto-ux500.h | ||
| cyttsp4.h | ||
| davinci-cpufreq.h | ||
| davinci_asp.h | ||
| dma-dw.h | ||
| dma-ep93xx.h | ||
| dma-hsu.h | ||
| dma-imx.h | ||
| dma-iop32x.h | ||
| dma-mcf-edma.h | ||
| dma-mmp_tdma.h | ||
| dma-mv_xor.h | ||
| dma-s3c24xx.h | ||
| dma-ste-dma40.h | ||
| dmtimer-omap.h | ||
| ds620.h | ||
| dsa.h | ||
| edma.h | ||
| elm.h | ||
| emif_plat.h | ||
| eth-ep93xx.h | ||
| fb-s3c2410.h | ||
| g762.h | ||
| gpio-ath79.h | ||
| gpio-davinci.h | ||
| gpio-htc-egpio.h | ||
| gpio-omap.h | ||
| gpio_backlight.h | ||
| gpmc-omap.h | ||
| gsc_hwmon.h | ||
| hirschmann-hellcreek.h | ||
| hsmmc-omap.h | ||
| hwmon-s3c.h | ||
| i2c-davinci.h | ||
| i2c-gpio.h | ||
| i2c-imx.h | ||
| i2c-mux-gpio.h | ||
| i2c-mux-reg.h | ||
| i2c-ocores.h | ||
| i2c-omap.h | ||
| i2c-pca-platform.h | ||
| i2c-pxa.h | ||
| i2c-s3c2410.h | ||
| i2c-xiic.h | ||
| ina2xx.h | ||
| intel-mid_wdt.h | ||
| invensense_mpu6050.h | ||
| iommu-omap.h | ||
| irda-pxaficp.h | ||
| irda-sa11x0.h | ||
| isl9305.h | ||
| itco_wdt.h | ||
| keyboard-pxa930_rotary.h | ||
| keyboard-spear.h | ||
| keypad-ep93xx.h | ||
| keypad-nomadik-ske.h | ||
| keypad-omap.h | ||
| keypad-pxa27x.h | ||
| keyscan-davinci.h | ||
| lcd-mipid.h | ||
| leds-lm355x.h | ||
| leds-lm3642.h | ||
| leds-lp55xx.h | ||
| leds-omap.h | ||
| leds-s3c24xx.h | ||
| lm3630a_bl.h | ||
| lm3639_bl.h | ||
| lm8323.h | ||
| lp855x.h | ||
| lp8727.h | ||
| lp8755.h | ||
| ltc4245.h | ||
| lv5207lp.h | ||
| max197.h | ||
| max732x.h | ||
| max3421-hcd.h | ||
| max6639.h | ||
| max6697.h | ||
| mcs.h | ||
| mdio-bcm-unimac.h | ||
| mdio-gpio.h | ||
| mfd-mcp-sa11x0.h | ||
| microchip-ksz.h | ||
| mlxcpld.h | ||
| mlxreg.h | ||
| mmc-davinci.h | ||
| mmc-esdhc-mcf.h | ||
| mmc-mxcmmc.h | ||
| mmc-omap.h | ||
| mmc-pxamci.h | ||
| mmc-s3cmci.h | ||
| mmc-sdhci-s3c.h | ||
| mmp_audio.h | ||
| mmp_dma.h | ||
| mouse-pxa930_trkball.h | ||
| mtd-davinci-aemif.h | ||
| mtd-davinci.h | ||
| mtd-nand-omap2.h | ||
| mtd-nand-pxa3xx.h | ||
| mtd-nand-s3c2410.h | ||
| mtd-orion_nand.h | ||
| mv88e6xxx.h | ||
| mv_usb.h | ||
| net-cw1200.h | ||
| nfcmrvl.h | ||
| omap-twl4030.h | ||
| omap-wd-timer.h | ||
| omap1_bl.h | ||
| omapdss.h | ||
| pca953x.h | ||
| pcf857x.h | ||
| pcmcia-pxa2xx_viper.h | ||
| phy-da8xx-usb.h | ||
| pinctrl-single.h | ||
| pm33xx.h | ||
| pxa2xx_udc.h | ||
| pxa_sdhci.h | ||
| regulator-haptic.h | ||
| rtc-ds2404.h | ||
| rtc-v3020.h | ||
| s3c-hsotg.h | ||
| s3c-hsudc.h | ||
| sa11x0-serial.h | ||
| sc18is602.h | ||
| sdhci-pic32.h | ||
| serial-omap.h | ||
| serial-sccnxp.h | ||
| sgi-w1.h | ||
| shmob_drm.h | ||
| sht3x.h | ||
| shtc1.h | ||
| si5351.h | ||
| simplefb.h | ||
| spi-davinci.h | ||
| spi-ep93xx.h | ||
| spi-mt65xx.h | ||
| spi-omap2-mcspi.h | ||
| spi-s3c64xx.h | ||
| ssm2518.h | ||
| st33zp24.h | ||
| st_sensors_pdata.h | ||
| syscon.h | ||
| tda9950.h | ||
| ti-aemif.h | ||
| ti-prm.h | ||
| ti-sysc.h | ||
| timer-ixp4xx.h | ||
| touchscreen-s3c2410.h | ||
| tps68470.h | ||
| tsc2007.h | ||
| tsl2563.h | ||
| tsl2772.h | ||
| uio_dmem_genirq.h | ||
| uio_pruss.h | ||
| usb-davinci.h | ||
| usb-ehci-orion.h | ||
| usb-musb-ux500.h | ||
| usb-ohci-pxa27x.h | ||
| usb-ohci-s3c2410.h | ||
| usb-omap.h | ||
| usb-omap1.h | ||
| usb-pxa3xx-ulpi.h | ||
| usb-s3c2410_udc.h | ||
| usb3503.h | ||
| video-ep93xx.h | ||
| video-imxfb.h | ||
| video-mx3fb.h | ||
| video-pxafb.h | ||
| video_s3c.h | ||
| voltage-omap.h | ||
| wilco-ec.h | ||
| wiznet.h | ||
| wkup_m3.h | ||
| xilinx-ll-temac.h | ||
| xtalk-bridge.h | ||
| zforce_ts.h | ||