comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_edid_checksum): Likewise.
(grub_vbe_get_preferred_mode): Likewise. Try EDID followed by the
Flat Panel extension, in line with the X.org VESA driver.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
(struct grub_vbe_edid_info): Likewise.
(grub_vbe_bios_get_flat_panel_info): Add prototype.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
(pc_partition_map_embed): Check for and avoid sectors matching any
of the signatures in embed_signatures.
* util/grub-setup.c (setup): Allow for the embedding area being
split into multiple blocklists.
* util/deviceiter.c (grub_util_iterate_devices): Increase SCSI
limit to 48 (to cope with Sun Fire X4500), and IDE limit to 96
(its SATA disks are detected as slaveless IDE master drives on
kFreeBSD).
Reported by Carsten Aulbert.
(arguments): New member allow_floppy.
(argp_parser): Handle --allow-floppy.
(main): Pass allow_floppy.
* util/grub-install.in: New option --allow-floppy passed though to
grub-setup.
* util/grub-mkconfig.in: Merge `GRUB_DISABLE_LINUX_RECOVERY' and
`GRUB_DISABLE_NETBSD_RECOVERY' into a single `GRUB_DISABLE_RECOVERY'
variable. All references updated.
* util/grub.d/10_kfreebsd.in: Support recovery boot entries.
* grub-core/disk/raid.c (grub_raid_getname) [GRUB_UTIL]: New function.
(insert_array): New argument raid.
* include/grub/disk.h (grub_disk_dev) [GRUB_UTIL]: New member raidname.
* include/grub/raid.h (grub_raid_array) [GRUB_UTIL]: New member driver.
* util/grub-probe.c (probe): PRint raidname instead of plainly "mdraid".
* Makefile.util.def (grub-setup): Add grub-core/lib/reed_solomon.c.
* grub-core/Makefile.am (rs_decoder.S): New target.
(kern/i386/pc/startup.S): Depend on rs_decoder.S.
* grub-core/kern/i386/pc/startup.S (reed_solomon_redundancy): New field.
(multiboot): Move to RS part.
(post_reed_solomon): New label.
(grub_boot_drive): Move to non-RS part since it's modified in memory
on boot.
Include rs_decoder.S.
* grub-core/lib/reed_solomon.c: New file.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY):
New definition.
(GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE): Removed.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Updated.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): New definition.
* include/grub/partition.h (grub_partition_map): Change prototype of
embed to allow returning additional sectors.
* include/grub/reed_solomon.h: New file.
* util/grub-setup.c (setup): Handle Reed-Solomon.
* Makefile.util.def (libgrub.a): Add grub-core/partmap/bsdlabel.c.
* grub-core/disk/efi/efidisk.c (grub_efidisk_get_device_name):
Properly handle concatenation.
* grub-core/kern/device.c (grub_device_iterate): Likewise.
* grub-core/normal/completion.c (iterate_partition): Likewise.
* grub-core/kern/disk.c (grub_disk_open): Make disk->name not
contain partition. All users updated.
* grub-core/partmap/bsdlabel.c (grub_netbsdlabel_partition_map): New
struct.
(grub_openbsdlabel_partition_map): Likewise.
(bsdlabel_partition_map_iterate): Rename to ..
(iterate_real): ... this. New arguments sector, freebsd and pmap.
(bsdlabel_partition_map_iterate): New function.
(netopenbsdlabel_partition_map_iterate): Likewise.
(netbsdlabel_partition_map_iterate): Likewise.
(openbsdlabel_partition_map_iterate): Likewise.
(GRUB_MOD_INIT): Register new partmaps.
(GRUB_MOD_FINI): Unregister new partmaps.
* grub-core/partmap/msdos.c (pc_partition_map_iterate): Rename to ...
(grub_partition_msdos_iterate): ... this. All users updated.
Don't support embedding other than in a minix partition.
* include/grub/msdos_partition.h (grub_partition_msdos_iterate): New
proto.
* include/grub/partition.h (grub_partition): New field msdostype.
* util/grub-install.in: Handle openbsd and netbsd types being in
part_bsd module.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
* Makefile.util.def (grub-mklayout): New file.
(grub-kbdcomp): New script.
* grub-core/Makefile.am (KERNEL_HEADER_FILES) [COND_mips_yeeloong]:
Add keyboard_layouts.h.
* grub-core/Makefile.core.def (kernel): Add commands/keylayouts.c and
commands/boot.c on yeeloong.
(keylayouts): New module.
* grub-core/bus/usb/ohci.c
* grub-core/bus/usb/uhci.c
* grub-core/bus/usb/usbhub.c (rescan): New variable.
(grub_usb_add_hub): Poll interrupt pipe for device handling.
(attach_root_port): Likewise.
(poll_nonroot_hub): Likewise.
(grub_usb_poll_devices): Likewise.
(detach_device): Close transfer.
* grub-core/bus/usb/usbtrans.c (grub_usb_execute_and_wait_transfer): New
function.
(grub_usb_bulk_setup_readwrite): Likewise.
(grub_usb_bulk_finish_readwrite): Likewise.
* grub-core/commands/keylayouts.c: New file.
* grub-core/commands/keystatus.c (grub_getkeystatus): New function.
* grub-core/commands/menuentry.c (hotkey_aliases): All several new
aliases.
* grub-core/term/at_keyboard.c: Restructured to use keylayouts and
support scancode 2.
* grub-core/term/usb_keyboard.c: Restructured to use keylayouts.
* include/grub/keyboard_layouts.h: New file.
* util/grub-mklayout.c: New file.
* util/grub-kbdcomp.in: Likewise.
Also-By: Aleš Nesrsta <starous@volny.cz>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot)
[GRUB_UTIL]: New variable.
(gpt_partition_map_iterate): Set part.parent.
(gpt_partition_map_embed) [GRUB_UTIL]: New function.
(grub_gpt_partition_map) [GRUB_UTIL]: Set .embed.
* grub-core/partmap/msdos.c (pc_partition_map_embed) [GRUB_UTIL]:
New function.
(grub_msdos_partition_map) [GRUB_UTIL]: Set .embed.
* include/grub/partition.h (grub_embed_type_t) [GRUB_UTIL]: New type.
(grub_partition_map) [GRUB_UTIL]: New field embed.
* util/grub-setup.c (grub_gpt_partition_type_bios_boot): Removed.
(setup): Use ->embed.
All users updated.
* disk/loopback.c (grub_loopback): Remove has_partitions.
All users updated.
(options): Remove partitions. All users updated.
* util/grub-fstest.c (fstest): Don't pass "-p" to loopback.
* util/i386/pc/grub-setup.c (setup): copy partition table only when
actual partition table is found.
* configure.ac (GRUB_KERNEL_MACHINE_LINK_ADDR): Removed.
* grub-core/Makefile.core.def (kernel): Make ldflags just use the
right address. Add sparc64_ieee1275_ldflags.
* grub-core/loader/sparc64/ieee1275/linux.c: Remove leftover include.
* util/grub-mkimagexx.c (locate_sections): Correct grub_host_to_target32
to grub_host_to_target_addr
(load_image): Likewise.
Set prefix_drive on EFI and PC to (,$grub_partition) as last resort.
* util/i386/pc/grub-setup.c (setup): Don't touch prefix.
Fixes a bug reported by Yves Blusseau.
and grub-core/disk/host.c to ...
(grub-fstest): ... here. Having the host disk implementation
present confuses grub-probe and other utility programs.
* util/grub-mkconfig.in: Only verify readability of grub.cfg.new
when writing to a file, not when writing to stdout.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
* grub-core/boot/i386/pc/lnxboot.S: Use
GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE.
* grub-core/kern/i386/pc/startup.S: Move grub_prefix to compressed part.
* include/grub/offsets.h: Rename GRUB_MACHINE_DATA_END to
GRUB_MACHINE_PREFIX_END. All users updated.
(GRUB_KERNEL_I386_PC_PREFIX): Set to GRUB_KERNEL_I386_PC_RAW_SIZE.
(GRUB_KERNEL_I386_PC_PREFIX_END): Set to GRUB_KERNEL_I386_PC_PREFIX
+ 0x40.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Decrease.
* util/grub-mkimage.c (image_target_desc): Change data_end to
prefix_end. All users updated.
* util/grub-mkimage.c (image_target_desc): New enum value
IMAGE_I386_PC_PXE.
(image_targets): New target i386-pc-pxe.
(generate_image): Handle i386-pc-pxe image.
* util/grub-mkimage.c (image_target_desc): New enum value
IMAGE_I386_PC_PXE.
(image_targets): New target i386-pc-pxe.
(generate_image): Handle i386-pc-pxe image.
Make kFreeBSD code more generic to support ext2fs as root, ufs as
a separate module and maybe other interesting combinations.
* util/grub.d/10_kfreebsd.in (load_kfreebsd_module): New function.
(kfreebsd_entry): Use load_kfreebsd_module() to load modules.
(kfreebsd_entry): Add generic filesystem module load routine.
Map GRUB `ext2' to kFreeBSD `ext2fs'.
* util/grub.d/10_kfreebsd.in: Initialize ${kfreebsd_device} as the
kFreeBSD device name, except on ZFS where the filesystem label is
used.
(kfreebsd_entry): On ZFS root, load `opensolaris.ko', `zfs.ko' and
`/boot/zfs/zpool.cache'.
Set mountfrom kernel variable using ${kfreebsd_device}.
Make it even harder to use uninitialized `libzfs_handle' (and
make the interface a bit simpler).
* include/grub/util/misc.h (grub_util_init_libzfs)
(libzfs_handle): Remove.
(grub_get_libzfs_handle): New prototype.
* util/misc.c [HAVE_LIBZFS] (libzfs_handle): Add `static'
attribute.
(grub_util_init_libzfs): Remove.
(grub_get_libzfs_handle): New function.
* kern/emu/getroot.c (find_root_device_from_libzfs): Use
grub_get_libzfs_handle() to obtain a libzfs handle instead of
accessing `libzfs_handle' directly.
Prevent accidental use of uninitialized libzfs_handle.
* util/grub-probe.c (main): Move grub_util_init_libzfs() call to ...
* kern/emu/getroot.c (find_root_device_from_libzfs): ... here.
* util/misc.c (grub_util_init_libzfs): Make this function idempotent.
Enable `grub-probe -t device' resolution on ZFS.
* configure.ac: Check for getfsstat(), libzfs and libnvpair.
* include/grub/util/libnvpair.h: New file.
* include/grub/util/libzfs.h: New file.
* kern/emu/getroot.c: Include `<assert.h>' and `<error.h>'.
[HAVE_LIBZFS && HAVE_LIBNVPAIR]: Include `<grub/util/libzfs.h>' and
`<grub/util/libnvpair.h>'.
[HAVE_GETFSSTAT]: Include `<sys/mount.h>'.
(find_mount_point_from_dir): New static function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (find_root_device_from_libzfs): New
function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (grub_guess_root_device): Use
find_root_device_from_libzfs() before ressorting to find_root_device().
* include/grub/util/misc.h (grub_util_init_libzfs): New function
prototype.
* util/misc.c: Include `<grub/util/libzfs.h>'.
(grub_util_init_libzfs): New function.
[HAVE_LIBZFS] (libzfs_handle): New global variable.
[HAVE_LIBZFS] (fini_libzfs): New static function.
(grub_util_init_libzfs): New function.
* util/grub-probe.c (main): Call grub_util_init_libzfs().
2010-07-20 Colin Watson <cjwatson@ubuntu.com>
Generate device.map in something closer to the old ordering.
* util/deviceiter.c (struct device): New declaration.
(compare_file_names): Rename to ...
(compare_devices): ... this. Sort by kernel name in preference to
the stable by-id name, but keep the latter as a fallback comparison.
Update header comment.
(grub_util_iterate_devices) [__linux__]: Construct and sort an array
of `struct device' rather than of plain file names.
Also-By: Colin Watson <cjwatson@ubuntu.com>
* disk/raid.c (insert_array): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Add start_sector
parameter. Set its pointer target to 0.
* disk/mdraid_linux.c (grub_mdraid_detect): Add start_sector
parameter. Set its pointer target to 0 for 0.9 metadata, or to the
`data_offset' value from the superblock for 1.x metadata.
* disk/raid.c (grub_raid_read): Offset reads by the start sector of
data on the device.
(insert_array): Record the start sector of data on the device.
(grub_raid_register): Pass start_sector parameters to
grub_raid_list->detect and insert_array.
* include/grub/raid.h (struct grub_raid_array): Add start_sector
member.
(struct grub_raid): Add start_sector parameter to `detect'.
* disk/mdraid_linux.c (struct grub_raid_super_1x): Remove
__attribute__ ((packed)), leaving a comment.
(grub_mdraid_detect): Split out 0.9 and 1.x detection to ...
(grub_mdraid_detect_09): ... here and ...
(grub_mdraid_detect_1x): ... here.
2010-07-20 Peter Henn <peter.henn@web.de>
* disk/mdraid_linux.c (grub_mdraid_detect): Fix calculation of 1.x
chunk size and disk size, which are already given as sector counts
as distinct from the 0.90 units. Fetch the correct device number
from the role table instead of using the table index.
2010-07-20 Felix Zielcke <fzielcke@z-51.de>
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Set array->name to NULL.
* disk/mdraid_linux.c (grub_raid_super_1x): New structure.
(WriteMostly1): New macro.
Set array->name to NULL for metadata format 0.90. Add support for
metadata 1.x. Fix some comments.
* disk/raid.c (): Add support for name based RAID arrays. Fix a
few comments.
* util/getroot.c (grub_util_get_grub_dev): Add support for
/dev/md/name style devices.
Also-By: Peter Henn <peter.henn@web.de>
Also-By: Colin Watson <cjwatson@ubuntu.com>
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
install_prefix, in line with install_dos_part and install_bsd_part.
Add new prefix variable, which is copied to install_prefix after
comparing core.img in memory with the one read from disk in the
no-embedding case, and use that rather than overwriting
install_prefix immediately when installing to a partition.
Fixes Debian bug #586621; based on patches by Matt Kraai and M. Vefa
Bicakci.
* util/grub-mkconfig.in: Export `GRUB_BADRAM' variable.
* util/grub.d/00_header.in: When `GRUB_BADRAM' is set, issue badram
command using ${GRUB_BADRAM} as parameter.
possible on Linux.
* util/deviceiter.c (check_device): Rename to ...
(check_device_readable_unique): ... this. Update all callers.
Maintain and check a list of which devices (by canonicalized name)
have already been seen.
(clear_seen_devices): New function.
(compare_file_names) [__linux__]: New function.
(grub_util_iterate_devices): Clear the list of seen devices on exit
and (just in case) on entry.
(grub_util_iterate_devices) [__linux__]: Iterate over non-partition
devices in /dev/disk/by-id/, in sorted order. Remove DM-RAID
seen-devices list, superseded by general code in check_device.
setting GRUB_VIDEO_BACKEND. Make it available as a user override
instead. Replace the gfxterm backend check with a check that
${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
(load_video): New generated function. Call it before loading
gfxterm rather than loading ${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
Use video functions in linux and xnu loaders.
* conf/i386-pc.rmk (xnu_mod_SOURCES): Remove loader/i386/pc/xnu.c.
* conf/x86-efi.rmk (xnu_mod_SOURCES): Remove loader/i386/efi/xnu.c.
* include/grub/i386/xnu.h (grub_xnu_set_video): Removed.
* loader/i386/efi/linux.c (grub_linux_setup_video): Copied from
loader/i386/pc/linux.c.
(grub_linux_boot): Resynced with loader/i386/pc/linux.c.
(find_line_len): Removed.
(find_framebuf): Likewise.
(grub_cmd_linux): Declare grub_linux_boot as possibly returning.
* loader/i386/efi/xnu.c: Removed.
* loader/i386/pc/xnu.c: Moved from here...
* loader/i386/xnu.c: ...here.
Enable priorities in video drivers.
* include/grub/video.h (grub_video_adapter_prio_t): New type.
(grub_video_adapter): New field prio.
(grub_video_register): Respect prio when inserting.
* video/efi_gop.c (grub_video_gop_adapter): Add prio.
* video/efi_uga.c (grub_video_uga_adapter): Likewise.
* video/emu/sdl.c (grub_video_sdl_adapter): Likewise.
* video/i386/pc/vbe.c (grub_video_vbe_adapter): Likewise.
* video/i386/pc/vga.c (grub_video_vga_adapter): Likewise.
* video/ieee1275.c (grub_video_ieee1275_adapter): Likewise.
* video/sm712.c (grub_video_sm712_adapter): Likewise.
Fix SDL driver ID.
* include/grub/video.h (grub_video_driver_id_t): New value
GRUB_VIDEO_DRIVER_SDL.
* video/emu/sdl.c (grub_video_sdl_adapter): Add id.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
available as a user override instead. Replace the gfxterm backend
check with a check that ${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in (load_video): New generated function.
Call it before loading gfxterm rather than loading
${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
#585068). Note that the case where the core image is booted using
multiboot and relocated from its original location still requires
more work.
* kern/i386/pc/init.c (make_install_device): If the prefix starts
with "(,", fill the boot drive in between those two characters, but
expect that a full partition specification including partition map
names will follow.
* util/i386/pc/grub-setup.c (setup): Unless an explicit prefix was
specified, write a prefix without the drive name but including a
full partition specification.
compatibility with older versions (before 2010-06-12) which did the
same. In particular, this makes it easier to ship an update-grub
wrapper which is compatible with that used with GRUB Legacy (Debian
bug #586056).
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
* util/grub.d/10_linux.in (linux_entry): Load all video drivers,
which may be needed to allow the loader to program modes for the
kernel.
(grub_device_mapper_supported): New function.
* include/grub/emu/misc.h (grub_device_mapper_supported): Add
prototype.
* kern/emu/hostdisk.c (find_partition_start): Check whether
device-mapper is supported before trying to use it.
* util/deviceiter.c (grub_util_iterate_devices): Likewise.
-DGRUB_PKGLIBROOTDIR= and prepend @PACKAGE_TARNAME@. All users updated.
* util/grub-mkimage.c (image_targets): Add i386-multiboot.
(main): Add a slash after pkglibdirroot.
* util/hostdisk.c (device_is_mapped): New function.
(find_partition_start): New function, partly broken out from
linux_find_partition and grub_util_biosdisk_get_grub_dev but with
device-mapper support added.
(linux_find_partition): Use find_partition_start.
(convert_system_partition_to_system_disk): Add `st' argument.
Support Linux /dev/mapper/* devices if device-mapper support is
available; only DM-RAID devices are understood at present.
(find_system_device): Add `st' argument. Pass it to
convert_system_partition_to_system_disk.
(grub_util_biosdisk_get_grub_dev): Pass stat result to
find_system_device and convert_system_partition_to_system_disk. Use
find_partition_start.
* conf/common.rmk (grub_mkdevicemap_SOURCES): Add kern/env.c,
kern/err.c, kern/list.c, kern/misc.c, and kern/emu/mm.c.
* util/deviceiter.c [__linux__]: Define MINOR.
(grub_util_iterate_devices): Add support for DM-RAID disk devices.
* util/mkdevicemap.c (grub_putchar): New function.
(grub_getkey): New function.
(grub_refresh): New function.
(main): Set debug=all if -v -v is used.
we handle finding grub-mkimage. Default to finding grub-mkimage in
${bindir} with program_transform_name applied, and provide a
--grub-mkimage option to override this.
Remove broken Cygwin path conversion.
* util/misc.c: [__CYGWIN__] Add include and define.
[__CYGWIN__] (get_win32_path): Copy function from getroot.c, modify
for Cygwin 1.7.
(make_system_path_relative_to_its_root): Simplify loop, replace early
return by break.
[__CYGWIN__] Add conversion to win32 path.
Include "/" case in trailing slash removal.
mistake in r2156. Noticed by Anthony Fok.
* util/grub.d/10_kfreebsd.in (TEXTDOMAINDIR): Set to lowercased
@localedir@.
* util/grub.d/10_linux.in (TEXTDOMAINDIR): Likewise.
* util/getroot.c (find_root_device): Convert block device to
character device on NetBSD.
* util/probe.c (probe): Require character device on NetBSD.
* util/hostdisk.c: NetBSD specific headers.
(configure_device_driver): new function to tune device driver
parameters (currently only for NetBSD floppy driver).
(grub_util_biosdisk_open): NetBSD specific code (get disk size
via disklabel ioctl).
(open_device): call configure_device_driver on NetBSD.
(convert_system_partition_to_system_disk): NetBSD specific code.
(device_is_wholedisk): Likewise.
(grub_util_biosdisk_get_grub_dev): Likewise.
(make_device_name): Fixed a typo in bsd_part_str.
* configure.ac: check for opendisk() and getrawpartition() on
NetBSD and set LIBUTIL.
* Makefile.in: add LIBUTIL to LIBS.
* include/grub/script_sh.h (grub_script_cmdwhile): New struct.
(grub_script_create_cmdwhile): New function prototype.
(grub_script_execute_cmdwhile): New function prototype.
* script/execute.c (grub_script_execute_cmdwhile): New function.
* script/parser.y (command): New commands.
(whilecmd): New grammar rule.
(untilcmd): New grammar rule.
* script/script.c (grub_script_create_cmdwhile): New function.
* util/grub-script-check.c (grub_script_execute_cmdwhile): New
function.
* tests/grub_script_while1.in: New testcase.
* conf/tests.rmk: Rule for new testcase.
GRUB_DISTRIBUTOR for --class, to avoid problems if somebody puts
spaces in GRUB_DISTRIBUTOR.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
which is the case with --disabled-nls.
* include/grub/i18n.h: Use (defined(ENABLE_NLS)
&& ENABLE_NLS) instead of ENABLE_NLS in all #if preprocessor macros.
* util/misc.c: Likewise.
* util/mkisofs/mkisofs.c: Likewise.
* util/mkisofs/mkisofs.h: Likewise.
* util/hostdisk.c (struct grub_util_biosdisk_data): New structure.
(grub_util_biosdisk_open): Initialise disk->data.
(struct linux_partition_cache): New structure.
(linux_find_partition): Cache partition start positions; these are
expensive to compute on every read and write.
(open_device): Cache open file descriptor in disk->data, so that we
don't have to reopen it and flush the buffer cache for consecutive
operations on the same device.
(grub_util_biosdisk_close): New function.
(grub_util_biosdisk_dev): Set `close' member.
* conf/common.rmk (grub_probe_SOURCES): Add kern/list.c.
* conf/i386-efi.rmk (grub_setup_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Likewise.
* conf/sparc64-ieee1275.rmk (grub_setup_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_setup_SOURCES): Likewise.
* util/hostdisk.c (struct grub_util_biosdisk_data): New structure.
(grub_util_biosdisk_open): Initialise disk->data.
(struct linux_partition_cache): New structure.
(linux_find_partition): Cache partition start positions; these are
expensive to compute on every read and write.
(open_device): Cache open file descriptor in disk->data, so that we
don't have to reopen it and flush the buffer cache for consecutive
operations on the same device.
(grub_util_biosdisk_close): New function.
(grub_util_biosdisk_dev): Set `close' member.
* conf/common.rmk (grub_probe_SOURCES): Add kern/list.c.
* conf/i386-efi.rmk (grub_setup_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Likewise.
* conf/sparc64-ieee1275.rmk (grub_setup_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_setup_SOURCES): Likewise.
* util/grub-mkconfig.in (GRUB_SAVEDEFAULT): Export new variable.
* util/grub-mkconfig_lib.in (save_default_entry): Only save a new
default entry if GRUB_SAVEDEFAULT=true. This allows using
GRUB_DEFAULT=saved on its own to let grub-reboot work, without
saving a new default on every boot.
Fix warnings in grub-emu when compiling with maximum warning options.
* util/hostdisk.c (grub_util_biosdisk_get_grub_dev): Rename one instance
of disk to dsk to avoid shadowing.
Fix warnings in grub-emu when compiling with maximum warning options.
* util/grub-emu.c (ENABLE_RELOCATABLE): New definition.
(grub_arch_modules_addr): Return 0 and not NULL.
* util/misc.c (ENABLE_RELOCATABLE): New definition.
(xstrdup): USe newstr instead of dup.
* util/hostdisk.c (open_device): Don't use partition device when reading
before the partition.
(grub_util_biosdisk_read): Don't read from partition and before the
partition in single operation.
(grub_util_biosdisk_write): Don't write to partition and before the
partition in single operation.
* util/grub.d/10_linux.in: This script does not use any of the
contents of gettext.sh, only the external command `gettext', so stop
sourcing it. (Moreover, gettext.sh isn't necessarily installed in
the same prefix as GRUB.)
* util/grub.d/10_kfreebsd.in: Likewise.
