* Makefile.in: Add `target_os' and `enable_grub_pe2elf'.
* conf/common.rmk: Install `grub-pe2elf' only if requested.
Install `grub.d/10_windows' only on Cygwin.
* configure.ac: Add subst of `target_os'.
Check `target_os' also before setting TARGET_OBJ2ELF.
Add `--enable-grub-pe2elf'.
* kern/disk.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(grub_last_time): Change type to grub_uint64_t.
(grub_disk_open): Migrate code from to using grub_get_time_ms().
(grub_disk_close): Likewise.
* normal/menu.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(run_menu): Migrate code from to using grub_get_time_ms().
* util/misc.c (grub_get_time_ms): New function.
* disk/ata.c (grub_ata_regget): Change return type to
`grub_uint8_t'.
(grub_ata_regget2): Likewise.
(grub_ata_wait_status): New function.
(grub_ata_wait_busy): Removed function, updated all users to use
`grub_ata_wait_status'.
(grub_ata_wait_drq): Likewise.
(grub_ata_cmd): New function.
(grub_ata_pio_read): Change return type to `grub_uint8_t'. Add
error handling.
(grub_ata_pio_write): Add error handling.
(grub_atapi_identify): Likewise.
(grub_atapi_packet): Use `grub_ata_cmd' and improve error
handling.
(grub_ata_identify): Use `grub_ata_cmd' and improve error
handling. Actually use the detected registers. Reorder the
detection logic such that it is easier to read.
(grub_ata_pciinit): Do not assign the same ID to each controller.
(grub_ata_setaddress): Use `grub_ata_cmd' and improve error
handling.
(grub_atapi_readsector): Check the result of `grub_ata_pio_read'.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_TIMEOUT'.
* kern/i386/pit.c (TIMER2_SPEAKER): New define.
(TIMER2_GATE): Likewise.
(grub_pit_wait): Add enable/disable of the timer2 gate
bit of port 0x61. This fixes a possible infinite loop.
* fs/i386/pc/pxe.c (grub_pxe_data): New member block_size.
(grub_pxefs_fs_int): Remove dummy definition.
(grub_pxefs_open): Use data->block_size to store the current block
size setting.
(grub_pxefs_read): Use block size stored in data->block_size. As the
value of grub_pxe_blksize can be changed after the file is opened.
* fs/i386/pc/pxe.c (curr_file): new variable.
(grub_pxefs_open): Simply the handling of pxe file system. Don't
require the dummy internal file system anymore.
(grub_pxefs_read): Removed.
(grub_pxefs_close): Likewise.
(grub_pxefs_fs_int): Likewise.
(grub_pxefs_read_int): Renamed to grub_pxefs_read. Reinitialize tftp
connection when we switch file.
(grub_pxefs_close_int): Renamed to grub_pxefs_close.
* util/console.c (grub_console_cur_color): New variable.
(grub_console_standard_color): Likewise.
(grub_console_normal_color): Likewise.
(grub_console_highlight_color): Likewise.
(color_map): Likewise.
(use_color): Likewise.
(NUM_COLORS): New macro.
(grub_ncurses_setcolorstate): Handle color properly.
(grub_ncurses_setcolor): Don't change color here, just remember the
settings, color will be set in grub_ncurses_setcolorstate.
(grub_ncurses_getcolor): New function.
(grub_ncurses_init): Initialize color pairs.
(grub_ncurses_term): New member grub_ncurses_getcolor.
High resolution timer support. Implemented for x86 CPUs using TSC.
Extracted generic grub_millisleep() so it's linked in only as needed.
This requires a Pentium compatible CPU; if the RDTSC instruction is
not supported, then it falls back on the generic grub_get_time_ms()
implementation that uses the machine's RTC.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `kern/time.c',
`kern/i386/tsc.c', `kern/generic/rtc_get_time_ms.c' and
`kern/generic/millisleep.c'.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Add `kern/i386/tsc.c',
`kern/generic/rtc_get_time_ms.c' and `kern/generic/millisleep.c'.
* conf/x86_64-efi.rml (kernel_mod_SOURCES): Add
`kern/generic/millisleep.c' and `kern/generic/rtc_get_time_ms.c'.
* conf/sparc64-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/generic/millisleep.c'.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Add `kern/time.c'.
* kern/generic/rtc_get_time_ms.c: New file.
* kern/generic/millisleep.c: New file.
* kern/misc.c: Don't include
<kern/time.h> anymore.
(grub_millisleep_generic): Removed.
* commands/sleep.c (grub_interruptible_millisleep): Uses
grub_get_time_ms() instead of grub_get_rtc().
* include/grub/i386/tsc.h (grub_get_tsc): New file. New inline
function.
(grub_cpu_is_cpuid_supported): New inline function.
(grub_cpu_is_tsc_supported): New inline function.
(grub_tsc_init): New function prototype.
(grub_tsc_get_time_ms): New function prototype.
* kern/i386/tsc.c (grub_get_time_ms): New file.
* include/grub/time.h: Include <grub/types.h.
(grub_millisleep_generic): Removed.
(grub_get_time_ms): New prototype.
(grub_install_get_time_ms): New prototype.
(grub_rtc_get_time_ms): New prototype.
* kern/time.c (grub_get_time_ms): New function.
(grub_install_get_time_ms): New function.
* kern/i386/efi/init.c: Include <grub/cpu/tsc.h>. Don't include
<grub/time.h> anymore.
(grub_millisleep): Removed.
(grub_machine_init): Call grub_tsc_init.
* kern/i386/linuxbios/init.c (grub_machine_init): Install the RTC
get_time_ms() implementation.
* kern/sparc64/ieee1275/init.c (grub_millisleep): Removed.
(ieee1275_get_time_ms): New function.
(grub_machine_init): Install get_time_ms() implementation.
* kern/i386/pc/init.c: Include <grub/cpu/tsc.h>.
(grub_machine_init): Call grub_tsc_init().
(grub_millisleep): Removed.
* kern/ieee1275/init.c (grub_millisleep): Removed.
(grub_machine_init): Install ieee1275_get_time_ms()
implementation.
(ieee1275_get_time_ms): New function.
(grub_get_rtc): Now calls ieee1275_get_time_ms(), which does the
real work.
* util/grub.d/00_header.in: Be platform-agnostic. Probe for existence
of modules instead of assuming which platform provides what.
* util/update-grub.in: Likewise.
* kern/i386/pc/init.c (make_install_device): Check for `grub_prefix'
instead of `grub_install_dos_part' to determine whether a drive needs
to be prepended to prefix (`grub_install_dos_part' is not reliable,
because it can be overriden when loading GRUB via Multiboot).
* disk/memdisk.c (memdisk_size): Don't initialize.
(GRUB_MOD_INIT(memdisk)): Find memdisk using grub_module_iterate().
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): Remove macro.
(GRUB_KERNEL_MACHINE_PREFIX, GRUB_KERNEL_MACHINE_DATA_END): Shift.
(grub_memdisk_image_size, grub_arch_memdisk_addr)
(grub_arch_memdisk_size): Remove.
* include/grub/kernel.h (struct grub_module_header): Remove `offset'
field (was only used to transfer a constant). Add `type' field to
support multiple module types.
(grub_module_iterate): New function.
* kern/device.c (grub_device_open): Do not hide error messages
when grub_disk_open() fails. Use grub_print_error() instead.
* kern/i386/pc/init.c (grub_arch_modules_addr)
(grub_arch_memdisk_size): Remove functions.
(grub_arch_modules_addr): Return the module address in high memory
(now that it isn't copied anymore).
* kern/i386/pc/startup.S (grub_memdisk_image_size): Remove variable.
(codestart): Don't add grub_memdisk_image_size to %ecx in LZMA
decompression routine (grub_total_module_size already includes that
now). Don't copy modules back to low memory.
* kern/main.c: Include `<grub/mm.h>'.
(grub_load_modules): Split out (and use) ...
(grub_module_iterate): ... this function, which iterates through
module objects and runs a hook.
Comment out grub_mm_init_region() call, as it would cause non-ELF
modules to be overwritten.
* util/i386/pc/grub-mkimage.c (generate_image): Instead of appending
the memdisk image in its own region, make it part of the module list.
* util/elf/grub-mkimage.c (options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
(add_segments): Pass `memdisk_path' down to load_modules().
(load_modules): Embed memdisk image in module section when requested.
* util/i386/efi/grub-mkimage.c (make_mods_section): Initialize
`header.type' instead of `header.offset'.
* conf/powerpc-ieee1275.rmk (pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES, memdisk_mod_CFLAGS)
(memdisk_mod_LDFLAGS): New variables.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* loader/i386/pc/multiboot.c (playground, forward_relocator)
(backward_relocator): New variables. Used to allocate and relocate
the payload, respectively.
(grub_multiboot_load_elf32): Load into heap instead of requested
address, install the appropiate relocator code in each bound of
the payload, and set the entry point such that
grub_multiboot_real_boot() will jump to one of them.
* kern/i386/loader.S (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): New variables.
(grub_multiboot_real_boot): Set cpu context to what the relocator
expects, and jump to the relocator instead of the payload.
* include/grub/i386/loader.h (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): Export.
* conf/common.rmk (pkglib_MODULES): Add bufio.mod.
(bufio_mod_SOURCES): New macro.
(bufio_mod_CFLAGS): Likewise.
(bufio_mod_LDFLAGS): Likewise.
* include/grub/bufio.h: New file.
* io/bufio.c: Likewise.
* video/png.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_png): Use grub_buffile_open to open file.
* video/jpeg.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_jpeg): Use grub_buffile_open to open file.
* video/tga.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_tga): Use grub_buffile_open to open file.
* font/manager.c: Include <grub/bufio.h>.
(add_font): Use grub_buffile_open to open file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): When loading
ELF segments, use a macro for arbitrarily accessing any of them instead
of preparing a pointer that allows access to one at a time.
(grub_multiboot_load_elf64): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_DATA_END):
Increase from 0x50 to 0x60.
* util/i386/pc/grub-install.in: Detect cross-disk installs, and
use UUIDs to identify the root drive for them. If that's not
possible, abort.
* util/i386/pc/grub-setup.c (setup): Do not special-case, or even
check, for cross-disk installs.
* kern/ieee1275/init.c (grub_machine_set_prefix): If `grub_prefix'
is non-empty, use it to set the `prefix' environment variable instead
of the usual approach.
* kern/i386/linuxbios/init.c (make_install_device): Remove function.
(grub_machine_set_prefix): Use `grub_prefix' to set the `prefix'
environment variable instead of dummy make_install_device().
* kern/i386/ieee1275/startup.S: Include `<grub/machine/kernel.h>'.
(start): Insert a data section, with `grub_prefix' variable.
* kern/i386/linuxbios/startup.S: Likewise.
* include/grub/powerpc/ieee1275/kernel.h [!ASM_FILE] (grub_prefix):
New variable reference.
* include/grub/i386/ieee1275/kernel.h (GRUB_KERNEL_MACHINE_PREFIX):
New macro. Defines offset of `grub_prefix' within startup.S (relative
to `start').
(GRUB_KERNEL_MACHINE_DATA_END): New macro. Defines the end of data
section within startup.S (relative to `start').
* include/grub/i386/coreboot/kernel.h: Likewise.
* util/elf/grub-mkimage.c (add_segments): Receive `prefix' parameter.
Overwrite grub_prefix with its contents, at the beginning of the
first segment.
(main): Understand -p|--prefix.
* term/i386/pc/vga_text.c (grub_console_cls): Use
grub_console_gotoxy() to go back to beginning of the screen.
Found by Patrick Georgi <patrick.georgi@coresystems.de>
* util/update-grub.in: Add a check for admin
group on Cygwin.
Remove old `grub.cfg.new' before creation.
Add `-f' to `mv' to handle the different filesystem
semantics of Windows.
* partmap/apple.c (GRUB_APPLE_HEADER_MAGIC): New macro.
(struct grub_apple_header): New struct. Describes the layout of
the partmap header.
(apple_partition_map_iterate): Check the header magic as well as the
partition magic (which was already being checked).
* disk/raid.c (grub_raid_scan_device): Do not abort when two disks
with the same number are found, just use issue a warning with
grub_dprintf(), as this error has been reported to be non-fatal.
* fs/xfs.c (grub_xfs_dir_header): Change field i8count back to
smallino, as it's more descriptive, and i8count can be confused with
the other field count.
(grub_xfs_iterate_dir): Adjust grub_xfs_dir_entry pointer for small
inode type.
* util/getroot.c (find_root_device): Skip devices that match
/dev/dm-[0-9]. This lets the real device be found for any type of
abstraction (LVM, EVMS, RAID..).
(grub_guess_root_device): Do not traverse /dev/mapper (for LVM)
and /dev/evms (for EVMS) before traversing /dev. If a /dev/dm-[0-9]
device is found first, find_root_device() will now skip it.
* util/i386/pc/grub-install.in: If `--debug' is specified,
pass `--verbose' to grub-setup.
Abort script if make_system_path_relative_to_its_root() fails.
* common.rmk (bin_UTILITIES): Add grub-pe2elf.
(grub_pe2elf_SOURCES): New macro.
(CLEANFILES): Add grub-pe2elf.
* include/grub/efi/pe32.h (GRUB_PE32_SCN_ALIGN_1BYTES): New constant.
(GRUB_PE32_SCN_ALIGN_2BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_4BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_8BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_16BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_32BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_64BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_SHIFT): Likewise.
(GRUB_PE32_SCN_ALIGN_MASK): Likewise.
(GRUB_PE32_SYM_CLASS_EXTERNAL): Likewise.
(GRUB_PE32_SYM_CLASS_STATIC): Likewise.
(GRUB_PE32_SYM_CLASS_FILE): Likewise.
(GRUB_PE32_DT_FUNCTION): Likewise.
(GRUB_PE32_REL_I386_DIR32): Likewise.
(GRUB_PE32_REL_I386_REL32): Likewise.
(grub_pe32_symbol): New structure.
(grub_pe32_reloc): Likewise.
* util/grub-pe2elf.c: New file.
* configure.ac: Set TARGET_OBJ2ELF if host os is cygwin. Don't test for
start symbol in non pc platform.
* genmk.rb: Use TARGET_OBJ2ELF to convert native object format to elf.
The following patches are from Christian Franke.
* include/grub/dl.h: Remove .previous, gas supports this only
for ELF format.
* include/grub/symbol.h [__CYGWIN__] (#define FUNCTION/VARIABLE):
Remove .type, gas supports this only for ELF format.
* kern/dl.c (grub_dl_resolve_dependencies): Add check for trailing
nullbytes in symbol table. This fixes an infinite loop if table is
zero filled.
* Makefile.in: Add autoconf replacements TARGET_IMG_LDSCRIPT,
TARGET_IMG_LDFLAGS and EXEEXT.
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Replace -Wl,-N by
TARGET_IMG_LDFLAGS_AC.
(grub_CHECK_STACK_ARG_PROBE): New function.
* conf/i386-pc.rmk: Replace -Wl,-N by TARGET_IMG_LDFLAGS.
* conf/i386-pc-cygwin-ld-img.sc: New linker script.
* configure.ac: Add check for linker script "conf/${target}-img-ld.c"
to set TARGET_IMG_LD* accordingly.
Add check for Cygwin to set TARGET_MOD_OBJCOPY accordingly.
Add call to grub_CHECK_STACK_ARG_PROBE.
Use TARGET_IMG_LDFLAGS to check start, bss_start, end symbols.
* genkernsyms.sh.in: Handle HAVE_ASM_USCORE case.
* genmk.rb: Add EXEEXT to CLEANFILES.
* Makefile.in (UNICODE_ARROWS, UNICODE_LINES): New variables (they
define the codes for arrows and lines used for the menu).
(ascii.pff): Generate fonts for $(UNICODE_ARROWS) and $(UNICODE_LINES)
as well.
* util/update-grub_lib.in (font_path): Prefer ascii.pff over complete
fonts, because the latter are too slow.
* kern/dl.c: Go back to using GRUB_CPU_SIZEOF_VOID_P. We cannot
load foreign architecture modules correctly anyway. Keep
support for loading host architecture modules, whether we
compile them or not.
* aclocal.m4 (grub_PROG_TARGET_CC): New macro. Check if the
target compiler is functional.
* configure.ac: Call grub_PROG_TARGET_CC once all target flags
are set up.
* configure.ac: Default to efi platform for x86_64-apple. Allow
powerpc64 CPU, default to ieee1275 platform for it. Split CPU
adjustments from the rest, only do them if target is not
explicitly given. Merge other adjustments with the final sanity
check. Remove an extraneous check for supported CPU. Be
specific which CPU and which platform is not supported.
* util/i386/efi/grub-mkimage.c (get_target_address): Return a
pointer, not an integer. This fixes a warning and prevents
precision loss on 64-bit systems.
(relocate_addresses): Remove unneeded cast.
* util/grub.d/40_custom.in: New file. Example on how to add custom
entries to /etc/grub.d.
* conf/common.rmk (%, update-grub_SCRIPTS, CLEANFILES): Install
40_custom (implicitly, by merging all the grub.d rules).
* term/i386/pc/serial.c (GRUB_SERIAL_PORT_NUM): New constant.
[!GRUB_MACHINE_PCBIOS] (serial_hw_io_addr): Add COM2 and COM3.
(serial_hw_get_port): Check validity of the port number.
(grub_cmd_serial): Check return value of serial_hw_get_port().
* boot/i386/pc/diskboot.S (notification_string): Replace
"Loading kernel" with just "loading". This is shorter, less
confusing and saves a few bytes for possible future changes.
* kern/i386/linuxbios/init.c (grub_machine_init): Cast addr to
grub_addr_t before casting it to the void pointer to fix a
warning. Non-addressable regions are discarded earlier.
(grub_arch_modules_addr): Cast _end to grub_addr_t.
* kern/i386/linuxbios/table.c: Include grub/misc.h.
(check_signature): Don't shadow table_header.
(grub_linuxbios_table_iterate): Cast numeric constants to
grub_linuxbios_table_header_t.
* include/grub/i386/linuxbios/init.h: Add noreturn attribute to
grub_stop().
This fixes a performance issue when pc & gpt partmap iterators
didn't abort iteration even after our hook found what it was
looking for (often causing expensive probes of non-existant drives).
Some callers relied on previous buggy behaviour, since they would
rise an error when their own hooks caused early abortion of its
iteration.
* kern/device.c (grub_device_open): Improve error message.
* disk/lvm.c (grub_lvm_open): Likewise.
* disk/raid.c (grub_raid_open): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(pc_partition_map_probe): Do not fail when find_func() caused
early abortion of pc_partition_map_iterate().
* partmap/gpt.c (gpt_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(gpt_partition_map_probe): Do not fail when find_func() caused
early abortion of gpt_partition_map_iterate().
* kern/partition.c (grub_partition_iterate): Abort parent iteration
when hook requests it, independently of grub_errno. Do not fail when
part_map_iterate_hook() caused early abortion of p->iterate().
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Do not fail
when grub_partition_iterate() returned with non-zero.
* disk/ata.c (grub_ata_pio_write): Check status before writing,
like we do in grub_ata_pio_read().
(grub_ata_readwrite): Always write individual sectors. Fix the
sector count for the remainder.
(grub_ata_write): Enable writing to ATA devices. Correctly
report error for ATAPI devices.
* disk/ata.c (grub_ata_readwrite): Don't increment sector number
for every read sector, we already increment it for the whole
batch. This fixes reading more than 256 sectors at once.
* Makefile.in (MODULE_LDFLAGS): New variable.
* aclocal.m4 (grub_PROG_LD_BUILD_ID_NONE): New macro. Check if
the linker accepts --build-id=none.
* configure.ac: Call grub_PROG_LD_BUILD_ID_NONE. Substitute
MODULE_LDFLAGS.
* genmk.rb: Use MODULE_LDFLAGS when linking modules.
* fs/xfs.c (struct grub_xfs_dir_header): Use names similar to
those in Linux XFS code. Provide a way to access 64-bit parent
inode.
(grub_xfs_iterate_dir): Use the new names. Avoid reading past
the end of struct grub_xfs_dir_header.
* include/grub/ieee1275.h (grub_ieee1275_flag): New constant
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set flag
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI for Open Hackware.
* kern/ieee1275/ieee1275.c (grub_ieee1275_interpret): Return
immediately if GRUB_IEEE1275_FLAG_CANNOT_INTERPRET is set.
* kern/ieee1275/init.c (grub_claim_heap): Claim memory directly if
GRUB_IEEE1275_FLAG_FORCE_CLAIM is set.
* term/ieee1275/ofconsole.c (grub_ofconsole_writeesc): Don't output
esc sequence on non ANSI terminal.
(grub_ofconsole_gotoxy): Emulate backspace key on non ANSI terminal.
* util/elf/grub-mkimage.c (add_segments): Move ELF header to the
beginning of file.
* disk/raid.c: Cast grub_dprintf() arguments to unsigned long
long if the format specifier expects it.
* partmap/gpt.c (gpt_partition_map_iterate): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* fs/ntfs.c (grub_ntfs_uuid): Cast data->uuid to unsigned long
long to fix a warning.
* fs/reiserfs.c (grub_reiserfs_read): Change casts in
grub_dprintf() arguments to fix warnings.
* util/i386/pc/grub-setup.c (setup): Write install_dos_part and
install_bsd_part immediately before core.img is embedded or
modified on disk. This fixes core.img verification if core.img
cannot be embedded.
* fs/xfs.c (GRUB_XFS_FSB_TO_BLOCK): New macro. Maps filesystem
block to disk block.
(grub_xfs_read_block): Use GRUB_XFS_FSB_TO_BLOCK() on result.
Patch from Niels B\303\266hm <bitbucket@arcor.de>
* util/update-grub_lib.in (font_path): Search for fonts in
/boot/grub first, which is more likely to be readable (we aren't
deciding where fonts live, just looking for them).
* util/grub.d/10_linux.in: Avoid passing UUIDs to Linux when either
"/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" does not exist, or when a
Linux image includes no initrd.
* util/grub.d/00_header.in: Move last prepare_grub_to_access_device()
call from here ...
* util/grub.d/10_hurd.in: ... to here ...
* util/grub.d/10_linux.in: ... and here.
* commands/search.c (search_label, search_fs_uuid, search_file): Print
search result when not saving to variable, not the other way around.
When saving to variable, abort iteration as soon as a match is found.
* util/update-grub_lib.in (prepare_grub_to_access_device): Remove
check for partition that provides /boot/grub. Its logic is flawed,
as it prevents prepare_grub_to_access_device() from being called
multiple times.
* util/update-grub_lib.in (prepare_grub_to_access_device): Issue
"insmod" command directly when abstraction modules are needed,
instead of reliing on GRUB_PRELOAD_MODULES (which had no effect
since it had already been processed).
* conf/i386-efi.rmk: Recompile grub-mkimage.c if Makefile has
changed. This is needed in case GRUB_LIBDIR changes.
* conf/i386-ieee1275.rmk: Likewise.
* conf/i386-linuxbios.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Rename
kernel_elf_symlist.c to symlist.c for consistency with other
architectures. Update all users.
* conf/sparc64-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* util/i386/pc/grub-install.in: If the drive is LVM or RAID, prepend
it in prefix.
* util/i386/pc/grub-setup.c (main): Don't handle prefix at all. Set
`must_embed' to 1 when root_dev is a RAID device. When dest_dev is
a RAID device, run setup() for all members independently on whether
LVM abstraction is being used.
(setup): Don't handle prefix at all; let grub-mkimage take care of it.
If grub-mkimage has set `*install_dos_part == -2', don't override this
value.
Perform *install_dos_part adjustments independently on whether
we're embedding or not.
Clarify error message when image is too big for embedding.
Remove duplicate *install_dos_part stanza.
* term/ieee1275/ofconsole.c (fgcolor, bgcolor): Remove variables.
(grub_ofconsole_normal_color, grub_ofconsole_highlight_color): New
variables.
(grub_ofconsole_setcolor, grub_ofconsole_getcolor): Load/store
values in grub_ofconsole_normal_color and
grub_ofconsole_highlight_color (they're not directly related to
background and foreground).
(grub_ofconsole_setcolorstate): Extract background and foreground
from grub_ofconsole_normal_color and grub_ofconsole_highlight_color.
* util/update-grub_lib.in (prepare_grub_to_access_device): Use
/boot/grub for the check in last commit, not /boot (they could be
different partitions).
* util/update-grub_lib.in (prepare_grub_to_access_device): If we were
asked to setup access for the same partition that provides /boot,
don't bother using UUIDs since our root already has the value we
want.
* commands/ls.c (grub_ls_list_files): Use integer calculations
for human readable format, avoid floating point use.
* kern/misc.c (grub_ftoa): Remove.
(grub_vsprintf): Remove floating point support.
* util/i386/pc/grub-mkimage.c (generate_image): If we included a drive
in our prefix, set install_{dos,bsd}_part = -2 to indicate this can be
skipped later.
(main): If a memdisk was requested, add "(memdisk)" drive explicitly to
the beginning of the prefix.
* kern/i386/pc/init.c (make_install_device): Remove memdisk check.
It is assumed that if we have a memdisk, grub-mkimage has set
grub_prefix to include the "(memdisk)" drive in it.
* term/i386/pc/console.c [GRUB_MACHINE_LINUXBIOS] (grub_console_init):
Initialize keyboard controller after registering the terminal, so that
grub_printf() can be called from grub_keyboard_controller_init().
* fs/sfs.c (grub_sfs_read_extent): Fix the count of nodes in
extent-btree which is written as big endian on disk.
Reported by Alain Greppin <al@chilibi.org>.
* fs/fshelp.c (grub_fshelp_read): New function. Implement
linear disk read with journal translation.
* fs/ext2.c: Use grub_fshelp_read() instead of grub_disk_read().
* include/grub/fshelp.h: Declare grub_fshelp_read().
Based on description from Pavel:
* kern/disk.c (grub_disk_check_range): Rename to ...
(grub_disk_adjust_range): ... this. Add a comment explaining the
tasks performed by this function.
* util/biosdisk.c (open_device): Revert last change to the
function, it broke installation. The sector needs to be
different dependent on which device is opened.
Ensure GRUB_KERNEL_MACHINE_DATA_END is always consistent with the
rest of GRUB, and breakage doesn't happen if its value were modified.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Redefine as an offset from `GRUB_KERNEL_MACHINE_DATA_END' instead of
a constant (same value).
* kern/i386/pc/startup.S: Replace hardcoded `0x50' with
`GRUB_KERNEL_MACHINE_DATA_END' (same value).
* util/grub-emu.c (grub_machine_init): Move code in this function from
here ...
(main): ... to here (before grub_util_biosdisk_init() call, to prevent
segfault in case grub_printf() is called).
* util/i386/pc/grub-install.in: Append `--device-map=${device_map}' to
grub_probe. Update all users not to explicitly add it again.
(grub_device): New variable; contains corresponding device for grubdir.
(fs_module, partmap_module, devabstraction_module): Pass
`--device ${grub_device}' to grub_probe to avoid traversing /dev
every time.
* util/biosdisk.c (get_drive): Verify that `map[i].drive' is non-NULL
before dereferencing it.
* fs/fat.c (struct grub_fat_bpb): Move fat32-specific fields into a
union with fat12/fat16-specific ones. Add some new fields, including
`num_serial' for both versions.
(struct grub_fat_data): Add `uuid' member.
(grub_fat_mount): Refer to fat32-specific fields in `bpb' by their new
names. Initialize `data->uuid' using `num_serial'.
(grub_fat_uuid): New function.
(grub_fat_fs): Reference grub_fat_uuid() in `uuid' struct member.
* fs/reiserfs.c (grub_reiserfs_superblock): Add `uuid' field.
(grub_reiserfs_uuid): New function.
(grub_reiserfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct
member.
* fs/xfs.c (grub_xfs_sblock): Add `uuid' field.
(grub_xfs_uuid): New function.
(grub_xfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct member.
* disk/i386/pc/biosdisk.c (grub_biosdisk_iterate): Iterate through
floppies after everything else, to ensure floppy drive isn't accessed
unnecessarily (patch from Bean).
* term/ieee1275/ofconsole.c (grub_ofconsole_setcursor): Implement
using "cursor-on" and "cursor-off" commands (understood at least by
the Open Firmware flavour on OLPC).
* util/biosdisk.c (linux_find_partition): Simplify logic and
make the code more universal. Keep special processing for
devfs, but use a simple rule for all other devices. If the
device ends with a number, append 'p' and the partition number.
Otherwise, append only the partition number.
* util/update-grub.in (GRUB_DISABLE_LINUX_UUID): Export variable.
* util/grub.d/10_linux.in: If GRUB_DEVICE_UUID is set, and
GRUB_DISABLE_LINUX_UUID isn't true, use the filesystem UUIDs as
the `root' parameter to Linux.
* commands/search.c (options): Rename --fs_uuid to --fs-uuid.
* util/update-grub_lib.in (prepare_grub_to_access_device): Replace
--fs_uuid with --fs-uuid.
* util/update-grub.in: Allow filesystem UUID probes to fail (since not
all filesystems support them).
* util/grub.d/00_header.in: Remove obsolete comment referencing
convert_system_path_to_grub_path().
* util/update-grub.in: Likewise.
* util/update-grub_lib.in (is_path_readable_by_grub): New function.
(convert_system_path_to_grub_path): Add a warning message explaining
that this function is deprecated. Rely on is_path_readable_by_grub()
for the readability checks.
(font_path): Use is_path_readable_by_grub() for the readability
check rather than convert_system_path_to_grub_path().
* util/update-grub_lib.in (prepare_grub_to_access_device): New function.
* util/update-grub.in: Set `GRUB_FONT_PATH' to the system path, without
converting it first.
* util/grub.d/00_header.in: Use prepare_grub_to_access_device() to setup
grub.cfg for access to font file, and afterwards call it again to set
the root device.
* commands/search.c (options): Add --fs_uuid option.
(search_fs_uuid): New function.
(grub_cmd_search): Fix --set argument passing.
Use search_fs_uuid() when requested via --fs_uuid.
(grub_search_init): Update help message.
* fs/ext2.c (struct grub_ext2_sblock): Rename `unique_id' to `uuid'
and redeclare it as an array of 16-bit words.
(grub_ext2_uuid): New function.
(grub_ext2_fs): Reference grub_ext2_uuid() in `uuid' struct member.
* include/grub/fs.h (struct grub_fs): Add `uuid' struct member.
* util/update-grub.in (GRUB_DEVICE_UUID, GRUB_DEVICE_BOOT)
(GRUB_DEVICE_BOOT_UUID): New variables.
(GRUB_DRIVE. GRUB_DRIVE_BOOT. GRUB_DRIVE_BOOT_GRUB): Remove.
* util/grub.d/00_header.in: Set root using `search --fs_uuid' command
whenever possible.
* util/grub.d/10_hurd.in: Avoid explicit use of root drive. Instead,
just assume `root' variable has the right value.
* util/grub.d/10_linux.in: Likewise.
* util/grub-probe.c (probe): Probe for filesystem UUID when requested
via PRINT_FS_UUID.
(main): Recognise `-t fs_uuid' argument.
* util/biosdisk.c (map): Redefine structure to hold information
about GRUB drive name.
(get_drive): Reimplement without assuming (and verifiing) BIOS-like
drive names.
(call_hook): Remove.
(grub_util_biosdisk_iterate): Access drive names via `.drive' struct
member. Assume drive has partitions.
(grub_util_biosdisk_open): Access device names via `.device' struct
member.
(open_device): Likewise.
(find_drive): Likewise.
(read_device_map): Adjust map[] usage to match the new struct
definition. Don't check for duplicates (still possible, but not cheap
anymore).
(grub_util_biosdisk_fini): Free malloced buffers referenced by map[].
(make_device_name): Remove assumption of BIOS-like drive names.
* include/grub/script.h: Don't include grub_script.tab.h. It's
a generated file, which may only be included from the files with
DEPENDENCIES rules in the makefile. Don't use typedef YYSTYPE,
use union YYSTYPE, as the later allows forward declaration.
* normal/lexer.c: Don't use typedef YYSTYPE, use union YYSTYPE.
* fs/fshelp.c (grub_fshelp_map_block): New function.
(grub_fshelp_find_file): Use 64-bit type for pos and block address.
Use `>>' and `&' operator to avoid 64-bit divide and modulo.
* include/grub/fshelp.h (grub_fshelp_journal_type): New enum.
(GRUB_FSHELP_JOURNAL_UNUSED_MAPPING): New macro.
(grub_fshelp_journal): New structure.
(grub_fshelp_map_block): New function prototype.
(grub_fshelp_read_file): Use grub_disk_addr_t as block type.
(grub_fshelp_map_block): Likewise.
* fs/ext2.c (EXT3_FEATURE_COMPAT_HAS_JOURNAL): New macro.
(EXT3_JOURNAL_MAGIC_NUMBER): Likewise.
(EXT3_JOURNAL_DESCRIPTOR_BLOCK): Likewise.
(EXT3_JOURNAL_COMMIT_BLOCK): Likewise.
(EXT3_JOURNAL_SUPERBLOCK_V1): Likewise.
(EXT3_JOURNAL_SUPERBLOCK_V2): Likewise.
(EXT3_JOURNAL_REVOKE_BLOCK): Likewise.
(EXT3_JOURNAL_FLAG_ESCAPE): Likewise.
(EXT3_JOURNAL_FLAG_SAME_UUID): Likewise.
(EXT3_JOURNAL_FLAG_DELETED): Likewise.
(EXT3_JOURNAL_FLAG_LAST_TAG): Likewise.
(grub_ext2_sblock): New members for journal support.
(grub_ext3_journal_header): New structure.
(grub_ext3_journal_revoke_header): Likewise.
(grub_ext3_journal_block_tag): Likewise.
(grub_ext3_journal_sblock): Likewise.
(grub_fshelp_node): New members logfile and journal.
(grub_ext2_read_block): Change block type to grub_disk_addr_t. Use
grub_fshelp_map_block to get real block number.
(grub_ext2_blockgroup): Use grub_fshelp_map_block to get real block
number.
(grub_ext2_read_inode): Likewise.
(grub_ext3_get_journal): New function.
(grub_read_inode): Initialize journal using grub_ext3_get_journal.
(grub_ext2_close): Release memory used by journal.
* fs/reiserfs.c (REISERFS_MAGIC_STRING): Changed to "ReIsEr".
(REISERFS_MAGIC_DESC_BLOCK): New macro.
(grub_reiserfs_transaction_header): Renamed to
grub_reiserfs_description_block, replace field data with real_blocks.
(grub_reiserfs_commit_block): New structure.
(grub_reiserfs_data): New member journal.
(grub_reiserfs_get_item): Use grub_fshelp_map_block to get real block
number.
(grub_reiserfs_read_symlink): Likewise.
(grub_reiserfs_iterate_dir): Likewise.
(grub_reiserfs_open): Likewise.
(grub_reiserfs_read): Likewise.
(grub_reiserfs_get_journal): New function.
(grub_reiserfs_mount): Use "ReIsEr" as super block magic, as there are
three varieties ReIsErFs, ReIsEr2Fs and ReIsEr3Fs. Initialize journal
using grub_reiserfs_get_journal.
(grub_reiserfs_close): Release memory used by journal.
* fs/affs.c (grub_affs_read_block): Change block type to
grub_disk_addr_t. Use grub_divmod64 to do 64-bit division.
* fs/afs.c (grub_afs_read_block): Change block type to grub_disk_addr_t.
* fs/hfsplus.c (grub_hfsplus_read_block): Likewise.
* fs/ntfs.c (grub_ntfs_read_block): Likewise.
* fs/udf.c (grub_udf_read_block): Change block type to
grub_disk_addr_t. Use type cast to avoid warning.
* fs/xfs.c (grub_xfs_read_block): Likewise.
* commands/cat.c (grub_cmd_cat): Remove non-ESC keys from keyboard queue
to ensure that break with ESC will always work.
* commands/sleep.c (grub_interruptible_millisleep): Likewise.
Remove ESC from keyboard queue.
* util/biosdisk.c: [__CYGWIN__] Add includes.
(grub_util_biosdisk_open): Use Linux code also for Cygwin.
(get_os_disk): Move variable declarations to OS specific
parts to avoid warning.
[__GNU__] (get_os_disk): Fix /dev/sdXsN case.
[__CYGWIN__] (get_os_disk): Add Cygwin /dev/sdXN device names.
(grub_util_biosdisk_get_grub_dev): Use Linux code also for
Cygwin.
* util/getroot.c: [__CYGWIN__] Add includes.
(strip_extra_slashes): Fix "/" case.
[__CYGWIN__] (get_win32_path): New function.
[__CYGWIN__] (grub_get_prefix): Add conversion to win32 path.
[__CYGWIN__] (find_root_device): Disable.
[__CYGWIN__] (get_bootsec_serial): New function.
[__CYGWIN__] (find_cygwin_root_device): Likewise.
[__linux__] (grub_guess_root_device): Add early returns to simplify
structure.
[__CYGWIN__] (grub_guess_root_device): Call find_cygwin_root_device.
[__linux__] (grub_util_get_dev_abstraction): Enable LVM and RAID
check for Linux only.
* util/biosdisk.c (get_os_disk): Recognise xvd type disks.
* util/grub-mkdevicemap.c (get_xvd_disk_name): New function.
(make_device_map): Output entries for xvd type disks.
* util/update-grub_lib.in (make_system_path_relative_to_its_root):
Do not print a trailing slash (therefore, the root directory is an
empty string).
(convert_system_path_to_grub_path): Do not remove trailing slash
from make_system_path_relative_to_its_root() output.
* util/i386/pc/grub-install.in: Add trailing slash to output from
make_system_path_relative_to_its_root().
* util/grub-fstest.c (grub_refresh): Call `fflush (stdout)'. This
ensures that output lines aren't intermangled with those sent to
stderr (via grub_util_info()).
* util/grub-probe.c (grub_refresh): Likewise.
* util/i386/pc/grub-setup.c (grub_refresh): Likewise.
Based on patch from Fabian Greffrath <greffrath@leat.rub.de>
* util/grub.d/10_linux.in: Add ${GRUB_CMDLINE_LINUX_DEFAULT} to the
first boot option.
* util/update-grub.in: Export GRUB_CMDLINE_LINUX_DEFAULT.
* Makefile.in (RMKFILES): Add missing arch i386-ieee1275 and
i386-linuxbios.
* commands/hexdump.c (grub_cmd_hexdump): Support dumping of device,
change the buffer size to 4096 for cdrom device.
* conf/i386-ieee1275.rmk (pkglib_MODULES): Add _linux.mod, linux.mod
and nand.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
(nand_mod_SOURCES): Likewise.
(nand_mod_CFLAGS): Likewise.
(nand_mod_LDFLAGS): Likewise.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Return
GRUB_ERR_UNKNOWN_DEVICE instead of GRUB_ERR_BAD_DEVICE if no device
type property. (nand device in olpc don't have this property)
* include/grub/disk.h (grub_disk_dev_id): New macro
GRUB_DISK_DEVICE_NAND_ID.
* include/grub/i386/ieee1275/loader.h (grub_rescue_cmd_linux): New
function prototype.
(grub_rescue_cmd_initrd): Likewise.
* include/grub/i386/linux.h (GRUB_LINUX_OFW_SIGNATURE): New macro.
(linux_kernel_params): Add new member ofw_signature, ofw_num_items,
ofw_cif_handler and ofw_idt, adjust padding number.
* include/grub/i386/pc/memory.h (grub_upper_mem): Export it if
GRUB_MACHINE_IEEE1275 is defined.
* include/grub/ieee1275/ieee1275.h (grub_available_iterate):
Use NESTED_FUNC_ATTR attribute on the hook parameter.
* kern/powerpc/ieee1275/init.c (grub_claim_heap): Use NESTED_FUNC_ATTR
on nested function heap_init.
(grub_upper_mem): New variable for i386-ieee1275.
(grub_get_extended_memory): New function for i386-ieee1275.
(grub_machine_init): Call grub_get_extended_memory for i386-ieee1275.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Use
NESTED_FUNC_ATTR on the hook parameter. Don't quit if no device type
property.
* loader/i386/ieee1275/linux.c: New file.
* loader/i386/ieee1275/linux_normal.c: New file.
* disk/ieee1275/nand.c: New file.
Restructures early code path on ieee1275 to unify grub_main() as
the first C function that is executed in every platform.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_init): New prototype.
* kern/i386/ieee1275/startup.S (_start): Jump to grub_main() instead of
cmain().
* kern/powerpc/ieee1275/crt0.S (_start): Likewise.
* kern/ieee1275/cmain.c (cmain): Rename to ...
* kern/ieee1275/cmain.c (grub_ieee1275_init): ... this.
* kern/ieee1275/init.c (grub_machine_init): Call grub_ieee1275_init()
at the beginning.
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): take only .text
section into account, newer toolchains generate unique build ids
* configure.ac: remove the test for --build-id=none acceptance,
we want build ids to bre preserved
* genmk.rb: add -R .note.gnu.build-id to objcopy, so build id
far from other sections don't cause the raw binary images grow
size
* util/i386/pc/grub-mkrescue.in: Add --emulation=floppy
to create a floppy emulation boot CD when non emulation mode
does not work.
Enable Joliet CD filesystem extension.
Improve robustness when handling LVM.
* disk/lvm.c (grub_lvm_getvalue): Return 0 when `*p' is NULL
(and leave `*p' unmodified).
(grub_lvm_iterate): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_memberlist): Don't assume `lv->vg->pvs != NULL' when
iterating through it.
(grub_lvm_open): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_scan_device): Check the return value (and fail gracefuly
when due) on each grub_lvm_getvalue() or grub_strstr() call.
Don't assume `vg->pvs != NULL' when iterating through it.
* util/grub.d/30_os-prober.in: New script. Use `os-prober' and
`linux-boot-prober' (if installed) to detect other operating
systems which are installed on the computer and add them to
the boot menu.
* conf/common.rmk: Build and install 30_os-prober.
* kern/powerpc/ieee1275/init.c: Move from here ...
* kern/ieee1275/init.c: ... to here. Update all users.
* kern/powerpc/ieee1275/cmain.c: Move from here ...
* kern/ieee1275/cmain.c: ... to here. Update all users.
* kern/powerpc/ieee1275/openfw.c: Move from here ...
* kern/ieee1275/openfw.c: ... to here. Update all users.
* loader/powerpc/ieee1275/multiboot2.c: Move from here ...
* loader/ieee1275/multiboot2.c: ... to here. Update all users.
Revert grub/machine/init.h addition by Pavel (since it breaks on
i386-ieee1275 and others):
* util/i386/pc/misc.c: Remove grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/biosdisk.c: Include grub/util/biosdisk.h.
* util/grub-fstest.c (execute_command): Make static.
* util/grub-mkdevicemap.c (check_device): Likewise.
* util/i386/pc/misc.c: Include grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/lvm.c: Include grub/util/lvm.h.
* util/misc.c: Include grub/kernel.h, grub/misc.h and
grub/cache.h.
* util/raid.c: Include grub/util/raid.h.
(grub_util_getdiskname): Make static.
* util/grub-emu.c (main): Remove calls to grub_hostfs_init() and
grub_hostfs_fini(), as they are called from grub_init_all() and
grub_fini_all() respectively. This fixes an infinite loop in
grub-fstest due to double registration of hostfs.
Reported by Christian Franke <Christian.Franke@t-online.de>
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options):
Fix signedness warnings.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate):
Likewise.
* util/ieee1275/get_disk_name.c: Include config.h so that
_GNU_SOURCE is defined and getline() is declared. Mark an
unused argument as such. Fix a signedness warning.
* genkernsyms.sh.in: Use more robust assignments for CC and
srcdir. Quote srcdir.
* gensymlist.sh.in: Likewise. Assert at the compile time that
the symbol table is not empty.
* disk/ata.c (grub_ata_open): Don't lose precision in disk->id.
* disk/host.c (grub_host_open): Likewise.
* disk/loopback.c (grub_loopback_open): Likewise.
* disk/memdisk.c (grub_memdisk_open): Use a string pointer for
disk->id as in disk/host.c, not a multi-character constant.
* util/grub-fstest.c (cmd_cmp): Use fseeko(), not fseek(). The
later is obsolete, potentially dangerous and sets a bad example.
* util/i386/efi/grub-mkimage.c (make_header): Likewise.
* util/misc.c (grub_util_get_image_size): Likewise.
* video/reader/png.c (grub_png_data): New member is_16bit and
image_data.
(grub_png_decode_image_header): Detect 16 bit png image.
(grub_png_convert_image): New function to convert 16 bit image to 8 bit.
(grub_png_decode_png): Call grub_png_convert_image for 16 bit image.
(grub_video_reader_png): Release memory occupied by image_data.
* fs/ntfs.c (find_attr): Handle non-resident attribute list larger than
4096 bytes.
(grub_nfs_mount): Skip the test for sector per cluster.
* include/grub/ntfs.h (MAX_SPC): Removed.
* fs/udf.c (grub_udf_mount): Fix warning about a shadowing a
variable.
* include/grub/i386/loader.h: Change declaration of
grub_linux_boot() to match what grub_loader_set() expects.
* util/getroot.c (grub_guess_root_device): Return const char* to
fix a warning.
* util/grub-probe.c (probe): Fix a warning about uninitialized
abstraction_name variable.
* util/i386/get_disk_name.c (grub_util_get_disk_name): Mark
second argument as unused to fix a warning.
* kern/i386/pc/startup.S (real_to_prot): Use %cs prefix to load
GDT. This is more robust, as %ds can change.
(grub_biosdisk_rw_int13_extensions): Don't clear %ds before
calling real_to_prot().
(grub_biosdisk_get_diskinfo_int13_extensions): Likewise.
* kern/i386/pc/startup.S: Assert that uncompressed functions
don't spill beyond GRUB_KERNEL_MACHINE_RAW_SIZE.
* kern/i386/pc/lzo1x.S: Remove all .align directives in the
code, as they push parts of the code (error handlers) beyond
GRUB_KERNEL_MACHINE_RAW_SIZE. Speed is not as important in this
code as correctness and size.
* kern/i386/pc/startup.S
(grub_biosdisk_get_diskinfo_int13_extensions): When converting
data block address to the real mode, keep offset minimal. This
works around a bug in AWARD BIOS on old Athlon systems, which
makes CD detection hang.
Remove 2 TiB limit in ata.mod.
* disk/ata.c (grub_ata_device): Promote `size' to grub_uint64_t.
(grub_ata_dumpinfo): Print sector count with 0x%llx.
(grub_ata_identify): Interpret `&info16[100]' as a pointer to
grub_uint64_t instead of grub_uint32_t.
* loader/i386/pc/multiboot.c (grub_multiboot_get_bootdev): New function.
(grub_multiboot): Set boot device.
* boot/i386/pc/lnxboot.S (real_code_2): Set %dh to 0xFF.
* util/update-grub.in: Reorganise terminal validity check. Accept
`ieee1275:console' (OLPC) and `*:gfxterm' as valid too.
Based on suggestion by Franklin PIAT.
* include/grub/util/getroot.h (grub_util_check_block_device): Export new
function.
* util/getroot.c (grub_util_check_block_device): New function that
returns the given argument if it is a block device and returns NULL else.
* util/grub-probe.c (argument_is_device): New variable.
(probe): Promote device_name from a variable to an argument. Receive
device_name from grub_util_check_block_device() if path is NULL and from
grub_guess_root_device() else. Do not free() device_name anymore.
(options): Introduce new parameter '-d, --device'.
(main): Add description of the new parameter to the help screen.
Rename path variable to argument. Set argument_is_device if the '-d'
option is given. Pass argument to probe() depending on
argument_is_device.
* partmap/gpt.c (grub_gpt_magic): Add `0x' qualifier to each member,
since they were intended to be in hex. This didn't break previously
because of a bug in gpt_partition_map_iterate() (see below).
(gpt_partition_map_iterate): Replace `grub_memcmp' with `! grub_memcmp'
when checking the validity of GPT header.
Remove `partno', since it always provides the same information as `i'.
* conf/i386-pc.rmk (pkglib_MODULES): Add aout.mod _bsd.mod and bsd.mod.
(aout_mod_SOURCES): New variable.
(aout_mod_CFLAGS): Likewise.
(aout_mod_LDFLAGS): Likewise.
(_bsd_mod_SOURCES): New variable.
(_bsd_mod_CFLAGS): Likewise.
(_bsd_mod_LDFLAGS): Likewise.
(bsd_mod_SOURCES): New variable.
(bsd_mod_CFLAGS): Likewise.
(bsd_mod_LDFLAGS): Likewise.
* include/grub/aout.h: New file.
* include/grub/i386/loader.h (grub_unix_real_boot): New function.
* include/grub/i386/bsd.h: New file.
* include/grub/i386/pc/init.h (grub_get_mmap_entry): Use EXPORT_FUNC
to make it public.
* kern/elf.c (grub_elf32_load): Get the physical address after the hook
function is called, so that it's possible to change it inside the hook.
(grub_elf64_load): Likewise.
(grub_elf_file): Don't close the file if elf header is not found.
(grub_elf_close): Close the file if grub_elf_file fails (The new
grub_elf_file won't close it).
(grub_elf32_size): Use NESTED_FUNC_ATTR for nested function calcsize.
(grub_elf64_size): Likewise.
* kern/i386/loader.S (grub_unix_real_boot): New function.
* loader/aout.c: New file.
* loader/i386/bsd.c: New file.
* loader/i386/bsd_normal.c: New file.
* loader/i386/pc/multiboot.c (grub_multiboot): Handle a.out format.
* loader/multiboot2.c (grub_multiboot2): Reset grub_errno so that it
can test othe formats.
* partmap/gpt.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_empty): Redefine with macro from
`<grub/gpt_partition.h>'.
(gpt_partition_map_iterate): Adjust partition type comparison.
Export `entry' as partmap-specific `part.data' struct.
(grub_gpt_header, grub_gpt_partentry): Move from here ...
* include/grub/gpt_partition.h (grub_gpt_header)
(grub_gpt_partentry): ... to here (new file).
* util/i386/pc/grub-setup.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_bios_boot): New const variable, defined
with macro from `<grub/gpt_partition.h>'.
(setup): Replace `first_start' with `embed_region', which keeps
track of the embed region (and is partmap-agnostic).
Replace find_first_partition_start() with find_usable_region(),
which finds a usable region for embedding using partmap-specific
knowledge (supports PC/MSDOS and GPT).
Fix all assumptions that the embed region start at sector 1, using
`embed_region.start' from now on. Similarly, use `embed_region.end'
rather than `first_start' to calculate available size.
In grub_util_info() message, replace "into after the MBR" with an
indication of the specific sector our embed region starts at.
* util/i386/pc/grub-setup.c (setup): In find_first_partition_start(),
do not assume partition map is PC/MSDOS before performing checks that
are specific to that layout.
* conf/i386-efi.rmk (grub_emu_SOURCES): Replace commands/i386/pc/halt.c and
reboot.c by commands/halt.c and reboot.c.
(grub_install_SOURCES): Add halt.mod and reboot.mod.
(halt_mod_SOURCES): New variable.
(halt_mod_CFLAGS): Likewise.
(halt_mod_LDFLAGS): Likewise.
(reboot_mod_SOURCES): Likewise.
(reboot_mod_CFLAGS): Likewise.
(reboot_mod_LDFLAGS): Likewise.
* conf/i386-ieee1275.rmk (grub_emu_SOURCES): Replace commands/ieee1275/halt.c
and reboot.c by commands/halt.c and reboot.c.
(halt_mod_SOURCES): Likewise.
(reboot_mod_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Replace commands/i386/pc/reboot.c by
commands/reboot.c.
(reboot_mod_SOURCES): Likewise.
* commands/i386/pc/reboot.c: merge this file ...
* commands/ieee1275/reboot.c: ... and this file ...
* commands/reboot.c: ... to this file.
Add some precompiler directive to include the correct header for each
machine.
* commands/ieee1275/halt.c: move this file ...
* commands/halt.c: ... to here.
Add some precompiler directive to include the correct header for each
machine.
* include/grub/efi/efi.h (grub_reboot): New function declaration.
(grub_halt): Likewise.
* kern/efi/efi.c (grub_reboot): New function.
(grub_halt): Likewise.
* util/getroot.c (grub_guess_root_device): Inspect /dev/evms before
/dev (like it is done for /dev/mapper). This doesn't provide support
for EVMS, but at least it is now easy to identify the problem when it
arises.
* util/biosdisk.c (grub_util_biosdisk_open, linux_find_partition)
(grub_util_biosdisk_get_grub_dev): Check open() exit status by
comparing it with -1, not 0.
* kern/main.c (grub_load_normal_mode): Do not reset `grub_errno'. Call
grub_print_error() instead. This will let user know why we're entering
rescue mode.
Based on suggestions from Sam Morris.
* font/manager.c (unknown_glyph): Added variable for unknown glyph.
(fill_with_default_glyph): Changed to use unknown_glyph for fill
pattern for unknown glyphs.
* configure.ac: Probe for `help2man'.
* Makefile.in (builddir): New variable.
(HELP2MAN): Likewise. Set to `true' when @HELP2MAN@ doesn't provide it,
or otherwise add a few flags/options to it.
(install-local): For every executable utility or script that is
installed, invoke $(HELP2MAN) to install a manpage based on --help
output.
* util/i386/pc/grub-install.in: Move down `update-grub_lib' sourcing, so
that it doesn't prevent --help from working in build tree.
* util/i386/pc/grub-mkrescue.in (usage): Replace `grub-devel@gnu.org'
with `bug-grub@gnu.org'.
* util/powerpc/ieee1275/grub-mkrescue.in (usage): Likewise.
* util/update-grub.in (usage): New function.
Implement proper argument check, with support for --help and --version
(as well as existing -y).
* disk/raid.c (grub_raid_scan_device): Add a pair of sanity checks for
situations in which we can deduce the RAID size and the superblock
doesn't match it.
* disk/lvm.c [GRUB_UTIL] (grub_lvm_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of LVM physical volumes.
[GRUB_UTIL] (grub_lvm_dev): Add `memberlist' member.
* disk/raid.c [GRUB_UTIL] (grub_raid_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of physical array members.
[GRUB_UTIL] (grub_raid_dev): Add `memberlist' member.
* include/grub/disk.h [GRUB_UTIL] (grub_disk_memberlist): New struct
prototype.
[GRUB_UTIL] (struct grub_disk_dev): Add `memberlist' function pointer.
[GRUB_UTIL] (struct grub_disk_memberlist): New struct declaration.
[GRUB_UTIL] (grub_disk_memberlist_t): New typedef.
* util/grub-probe.c (probe): Move partmap probing code from here ...
(probe_partmap): ... to here.
(probe): Use probe_partmap() once for the disk we're probing, and
additionally, when such disk contains a memberlist() struct member,
once for each disk that is contained in the structure returned by
memberlist().
* util/grub-probe.c (main): When `verbosity > 1', set `debug'
environment variable to 'all' in order to obtain debug output from
non-util/ code.
* util/i386/pc/grub-setup.c (main): Likewise.
* disk/raid.c (grub_raid_scan_device): Check for
`array->device[sb.this_disk.number]' rather than for
`array->device[sb.this_disk.number]->name', since the latter is not
garanteed to be accessible.
* include/grub/raid.h (struct grub_raid_array): Change type of `device'
to a grub_disk_t array.
* disk/raid.c (grub_raid_read): Replace `device[x].disk' accesses with
`device[x]'.
(grub_raid_scan_device): Replace `device[x].name' accesses with
`device[x]->name'. Simplify initialization of `array->device[x]'.
* disk/raid.c (grub_raid_open, grub_raid_scan_device): Add a few
grub_dprintf() calls.
* kern/disk.c (grub_disk_read): Include grub_errmsg in out of range
error message.
Patch from Jeroen Dekkers.
* disk/raid.c (grub_raid_scan_device): Reset `grub_errno' on disk
failure, since succesfuly reading all array members might not be
required.
* fs/cpio.c (grub_cpio_find_file): Return GRUB_ERR_NONE
(and set *ofs = 0) instead of GRUB_ERR_FILE_NOT_FOUND on
last block of a cpio or tar stream.
Check for "TRAILER!!!" instead of any empty data
block to detect last block of a cpio stream.
(grub_cpio_dir): Fix constness of variable np.
(grub_cpio_open): Return GRUB_ERR_FILE_NOT_FOUND if
cpio or tar trailer is detected. This fixes a crash
on open of a non existing file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Get physical
address of entry.
(grub_multiboot_load_elf64): Likewise.
(grub_multiboot): Initialize mbi structure.
* util/grub-fstest.c: Don't include unused header file script.h.
* conf/common.rmk (grub-fstest.c_DEPENDENCIES): Move to the begginning
of file.
(grub_fstest_SOURCES): Likewise.
* include/grub/term.h (GRUB_TERM_LEFT, GRUB_TERM_RIGHT)
(GRUB_TERM_UP, GRUB_TERM_DOWN, GRUB_TERM_HOME, GRUB_TERM_END)
(GRUB_TERM_DC, GRUB_TERM_PPAGE, GRUB_TERM_NPAGE, GRUB_TERM_ESC)
(GRUB_TERM_TAB, GRUB_TERM_BACKSPACE): New macros.
* kern/i386/pc/startup.S: Include `<grub/term.h>'.
(translation_table): Replace hardcoded values with macros
provided by `<grub/term.h>'.
* term/i386/pc/at_keyboard.c: Include `<grub/term.h>'.
(keyboard_map): Correct/add a few values, with macros provided
by `<grub/term.h>'.
(keyboard_map_shift): Zero values that don't differ from their
`keyboard_map' equivalents.
(grub_console_checkkey): Optimize KEYBOARD_STATUS_CAPS_LOCK toggling.
Discard the second scan code that is always sent by Caps lock.
Only use `keyboard_map_shift' when it provides a non-zero value,
otherwise fallback to `keyboard_map'.
Make grub-setup handle a separate root device.
* util/i386/pc/grub-setup.c (setup): Always open the root device,
so that the root device can be compared with the destination
device.
When embedding the core image, if the root and destination devices
are different, set ROOT_DRIVE to ROOT_DEV->DISK->ID. Otherwise, to
0xFF.
When not embedding, set ROOT_DRIVE to 0xFF.
Add support for having a grub directory in a different drive. This
is still only the data handling part.
* kern/i386/pc/startup.S (multiboot_trampoline): Set %dh to 0xFF.
(codestart): Save %dh in GRUB_ROOT_DRIVE.
(grub_root_drive): New variable.
* kern/i386/pc/init.c (make_install_device): Use GRUB_ROOT_DRIVE
instead of GRUB_BOOT_DRIVE to construct a device name. Set
GRUB_ROOT_DRIVE to GRUB_BOOT_DRIVE if it is 0xFF, otherwise use it
as it was.
* include/grub/i386/pc/kernel.h (grub_root_drive): New prototype.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_ROOT_DRIVE): New
macro.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Set to 0x4f.
* boot/i386/pc/pxeboot.S (_start): Set %dh to 0xFF. For now, this
is bogus, because PXE booting does not specify any drive
correctly.
* boot/i386/pc/lnxboot.S (reg_edx): Set the second byte to 0xFF. I
am not sure if this is really correct.
* boot/i386/pc/cdboot.S: Set %dh to 0xFF, because the root drive
is always identical to the boot drive when booting from a CD.
* boot/i386/pc/boot.S (MOV_MEM_TO_AL): Removed. Not needed any
longer.
(root_drive): New variable.
(real_start): Unconditionally set %dh to ROOT_DRIVE.
(setup_sectors): Push %dx right after popping it, because %dh will
be modified later.
(copy_buffer): Restore %dx.
* a/kern/i386/pc/startup.S (grub_chainloader_real_boot): Pop
%edx and %esi from stack only after grub_gate_a20() is called.
grub_gate_a20() clobbers %edx.
* conf/i386-pc.rmk (pkglib_IMAGES): Add cdboot.img.
(cdboot_img_SOURCES): New variable.
(cdboot_img_ASFLAGS): New variable.
(cdboot_img_LDFLAGS): New variable.
* boot/i386/pc/cdboot.S: New file.
* disk/i386/pc/biosdisk.c (cd_start): New variable.
(cd_count): Likewise.
(grub_biosdisk_get_drive): Add support for cd device.
(grub_biosdisk_call_hook): Likewise.
(grub_biosdisk_iterate): Likewise.
(grub_biosdisk_open): Likewise.
(GRUB_BIOSDISK_CDROM_RETRY_COUNT): New macro.
(grub_biosdisk_rw): Support reading from cd device.
(GRUB_MOD_INIT): Iterate cd devices.
* include/grub/i386/pc/biosdisk.h (GRUB_BIOSDISK_FLAG_CDROM): New macro.
(GRUB_BIOSDISK_MACHINE_CDROM_START): Likewise.
(GRUB_BIOSDISK_MACHINE_CDROM_END): Likewise.
* kern/i386/pc/init.c (make_install_device): Check for cd device.
* fs/ufs.c (INODE_BLKSZ): Fix incorrect value.
(grub_ufs_get_file_block): Fix indirect block calculation problem.
* fs/xfs.c (grub_xfs_sblock): New member log2_dirblk.
(grub_xfs_btree_node): New structure.
(grub_xfs_btree_root): New structure.
(grub_xfs_inode): New members nblocks, extsize, nextents and btree.
(GRUB_XFS_EXTENT_OFFSET): Use exts instead of inode->data.extents.
(GRUB_XFS_EXTENT_BLOCK): Likewise.
(GRUB_XFS_EXTENT_SIZE): Likewise.
(grub_xfs_read_block): Support btree format type.
(grub_xfs_iterate_dir): Use NESTED_FUNC_ATTR in call_hook.
Use directory block as basic unit.
* fs/fshelp.c (grub_fshelp_read_file): Bug fix for sparse block.
* aclocal.m4 (grub_i386_CHECK_REGPARM_BUG): Define NESTED_FUNC_ATTR as
__attribute__ ((__regparm__ (1))).
Correct a mistake in previous commit.
* conf/i386-pc.rmk (normal/execute.c_DEPENDENCIES): Move to the
top.
(normal/command.c_DEPENDENCIES): New variable.
* util/powerpc/ieee1275/grub-mkrescue.in: New file.
* conf/powerpc-ieee1275.rmk: Add grub-mkrescue support for
PowerPC.
* DISTLIST: Add util/powerpc/ieee1275/grub-mkrescue.in.
to create a gap between _end and the modules added to the image
with grub-mkrescue. That fixes "CLAIM failed" on PowerMAC.
* kern/powerpc/ieee1275/init.c: Use GRUB_MOD_GAP.
* util/elf/grub-mkimage.c (add_segments): Likewise.
* fs/reiserfs.c (grub_fshelp_node): New member next_offset.
(grub_reiserfs_get_item): Save offset of the next item.
(grub_reiserfs_iterate_dir): Use next_offset to find next item.
that hang if GRUB tries to setup colors.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Don't set
colors for firmwares that don't support it.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag):
Recognize Open Hack'Ware, set flags to work around its
limitations.
* fs/ufs.c (GRUB_UFS_VOLNAME_LEN): New macro.
(grub_ufs_sblock): New member volume name.
(grub_ufs_find_file): Fix string copy bug.
(grub_ufs_label): Implement this function properly.
* fs/hfs.c (grub_hfs_cnid_type): New enum.
(grub_hfs_iterate_records): Use the correct file number for extents
and catalog file. Fix problem in next index calculation.
(grub_hfs_find_node): Replace recursive function call with loop.
(grub_hfs_iterate_dir): Replace recursive function call with loop.
* term/i386/pc/at_keyboard.c (grub_keyboard_isr): #ifdef out
grub_dprintf calls, since they make "debug=all" mode unusable.
(grub_console_checkkey): Likewise.
* kern/i386/pc/init.c (make_install_device): When memdisk image is
present, "(memdisk)/boot/grub" becomes the default prefix.
* util/i386/pc/grub-mkrescue.in: Switch to a minimal core.img plus
a memdisk tarball with all the modules. Add --overlay=DIR option that
allows users to overlay additional files into the image.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add `machine/loader.h'
and `machine/memory.h'.
(pkglib_MODULES): Add `multiboot.mod' and `_multiboot.mod'.
(_multiboot_mod_SOURCES): New variable.
(_multiboot_mod_CFLAGS): Likewise.
(_multiboot_mod_LDFLAGS): Likewise.
(multiboot_mod_SOURCES): Likewise.
(multiboot_mod_CFLAGS): Likewise.
(multiboot_mod_LDFLAGS): Likewise.
* include/grub/i386/ieee1275/loader.h: New file.
* include/grub/i386/ieee1275/machine.h: Likewise.
* include/grub/i386/ieee1275/memory.h: Likewise.
* include/grub/i386/pc/init.h (grub_os_area_addr): Remove (redundant)
variable declaration.
(grub_os_area_size): Likewise.
* kern/i386/ieee1275/init.c (grub_os_area_addr, grub_os_area_size)
(grub_lower_mem, grub_upper_mem): New variables.
(grub_stop_floppy): New function (just to make
grub_multiboot2_real_boot() happy).
* kern/i386/ieee1275/startup.S: Include `<grub/machine/memory.h>',
`<grub/cpu/linux.h>', `<multiboot.h>' and `<multiboot2.h>'.
(grub_stop): New function.
Include `"../realmode.S"' and `"../loader.S"'.
* loader/multiboot_loader.c: Include `<grub/machine/machine.h>'.
Replace `__i386__' #ifdefs with `GRUB_MACHINE_PCBIOS'.
* loader/powerpc/ieee1275/multiboot2.c (grub_mb2_arch_boot): On i386,
rely on grub_multiboot2_real_boot() for final boot.
* disk/ieee1275/ofdisk.c (grub_ofdisk_iterate): When
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag is set, skip any
device that doesn't look like an SD card.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag): Detect
OLPC laptop, and set `GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' when
found.
* conf/i386-pc.rmk (GRUB_MEMORY_MACHINE_LINK_ADDR): New variable.
(kernel_img_LDFLAGS): Use `GRUB_MEMORY_MACHINE_LINK_ADDR' as link
address.
(grub_mkimage_CFLAGS): Propagate `GRUB_MEMORY_MACHINE_LINK_ADDR' as
a C macro.
* include/grub/i386/pc/memory.h (GRUB_MEMORY_MACHINE_UPPER): New macro.
Indicates start of upper memory.
* util/i386/pc/grub-mkimage.c: Include `<grub/machine/memory.h>'.
(generate_image): Abort when image size is big enough to corrupt
upper memory.
* include/grub/i386/pc/vga.h: Include `<grub/machine/memory.h>'.
(GRUB_MEMORY_MACHINE_VGA_ADDR): Alias for `GRUB_MEMORY_MACHINE_UPPER'.
* term/i386/pc/vga.c (VGA_MEM): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
* video/i386/pc/vbe.c: Include `<grub/machine/vga.h>'.
(grub_vbe_set_video_mode): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
Fix detection of very small filesystems (like tar).
* fs/reiserfs.c (grub_reiserfs_mount): When disk is too small to
contain a ReiserFS, abort with GRUB_ERR_BAD_FS rather than
GRUB_ERR_OUT_OF_RANGE (which made the upper layer think there's
a problem with this disk).
* include/grub/i386/pc/kernel.h: Include `<grub/symbol.h>'.
* include/grub/kernel.h (grub_arch_memdisk_addr,
grub_arch_memdisk_size): Moved from here ...
* include/grub/i386/pc/kernel.h (grub_arch_memdisk_addr,
grub_arch_memdisk_size): ... to here.
Mostly based on bugfix from Bean.
* kern/elf.c (grub_elf32_phdr_iterate): Use `NESTED_FUNC_ATTR'
attribute with hook() parameter.
(grub_elf32_load): Use `NESTED_FUNC_ATTR' with grub_elf32_load_segment()
declaration.
(grub_elf64_phdr_iterate): Use `NESTED_FUNC_ATTR'
attribute with hook() parameter.
(grub_elf64_load): Use `NESTED_FUNC_ATTR' with grub_elf64_load_segment()
declaration.
* conf/i386-pc.rmk (kernel_img_HEADERS): Add `machine/kernel.h'.
(pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES): New variable.
(memdisk_mod_CFLAGS): Likewise.
(memdisk_mod_LDFLAGS): Likewise.
* disk/memdisk.c: New file.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_MEMDISK_ID'.
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): New macro.
(GRUB_KERNEL_MACHINE_PREFIX): Increment by 4.
(grub_kernel_image_size): New variable declaration.
(grub_total_module_size): Likewise.
(grub_memdisk_image_size): Likewise.
* include/grub/i386/pc/memory.h
(GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR): New macro.
* include/grub/kernel.h: Include `<grub/symbol.h>'.
(grub_arch_memdisk_addr): New variable declaration.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/init.c (grub_arch_memdisk_addr): New function.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/startup.S (grub_memdisk_image_size): New variable.
(codestart): Replace hardcoded `0x100000' with
`GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR' macro.
* util/i386/pc/grub-mkimage.c: Include `<grub/misc.h>'.
(generate_image): Add `memdisk_path' parameter. When `memdisk_path' is
not NULL, append the contents of the file it refers to, at the end of
the compressed kernel image. Initialize `grub_memdisk_image_size'
variable (at `GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE' offset).
(options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
Fix detection of "real mode" when /options/real-mode? doesn't exist.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_mmu): New variable
declaration.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_mmu): New variable.
(grub_ieee1275_find_options): If `grub_ieee1275_mmu' is 0, set
`GRUB_IEEE1275_FLAG_REAL_MODE'.
(cmain): Intialize `grub_ieee1275_mmu' (using /chosen/mmu integer
property).
* kern/powerpc/ieee1275/openfw.c (grub_map): Rely on pre-initialized
`grub_ieee1275_mmu' rather than obtaining a handler on every call.
Get rid of confusing function (superceeded by
`grub_ieee1275_get_integer_property')
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_decode_int_4): Remove
prototype.
* kern/ieee1275/ieee1275.c (grub_ieee1275_decode_int_4): Remove
function.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid use of
grub_ieee1275_decode_int_4(), by obtaining integer properties directly
in native endianess from grub_ieee1275_get_integer_property().
* kern/powerpc/ieee1275/openfw.c (grub_halt): Issue "power-off"
command after "shut-down", since implementations differ on which
the command for halt is.
PowerPC changes provided by Pavel Roskin.
* kern/powerpc/ieee1275/cmain.c (cmain): Don't take any arguments.
* kern/powerpc/ieee1275/crt0.S: Store r5 in grub_ieee1275_entry_fn,
don't rely on cmain() doing it.
* kern/i386/ieee1275/startup.S (_start): Store %eax in
grub_ieee1275_entry_fn, don't rely on cmain() doing it.
* include/grub/i386/linuxbios/memory.h
(GRUB_MEMORY_MACHINE_LINUXBIOS_TABLE_ADDR): Remove macro.
* kern/i386/linuxbios/table.c (grub_linuxbios_table_iterate): Do not
receive `table_header' as argument. Instead, probe for it in the
known memory ranges where it can be present.
(grub_available_iterate): Do not pass a fixed `table_header' address
to grub_linuxbios_table_iterate().
* include/grub/ieee1275/ieee1275.h
(grub_ieee1275_get_integer_property): New function prototype.
* kern/ieee1275/ieee1275.c: Include `<grub/types.h>'.
(grub_ieee1275_get_integer_property): New function. Wraps around
grub_ieee1275_get_property() to handle endianess.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Replace
grub_ieee1275_get_property() with grub_ieee1275_get_integer_property()
where appropiate.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Likewise.
(grub_map): Likewise.
* kern/sparc64/ieee1275/openfw.c (grub_map): Likewise.
* normal/execute.c (grub_script_exec_argument_to_string): Check for undefined variable.
(grub_script_execute_cmdline): Reset grub_errno.
* normal/main.c (read_config_file): Reset grub_errno.
* normal/parse.y (script_init): New.
(script): Move function and menuentry here.
(delimiter): New.
(command): Add delimiter at the end of command.
(commands): Adjust to match the new command.
(commandblock): Remove grub_script_lexer_record_start.
(menuentry): Add grub_script_lexer_record_start, use the new commands.
(if): Use the new commands.
* conf/common.rmk (pkgdata_MODULES): Add echo.mod.
* normal/menu.c (run_menu): Move timeout message from here ...
(print_timeout): ... to here.
(run_menu): Use print_timeout() once during initial draw to print
the whole message, and again in every clock tick to update only
the number of seconds.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Obtain
actual size of `available' from grub_ieee1275_get_property(), and
restrict parsing to that bound.
* include/grub/util/getroot.h (grub_dev_abstraction_types): New enum.
(grub_util_get_dev_abstraction): New function prototype.
* util/getroot.c: Include `<grub/util/getroot.h>'
(grub_util_get_grub_dev): Move detection of abstraction type to ...
(grub_util_get_dev_abstraction): ... here (new function).
* util/grub-probe.c: Convert PRINT_* to an enum. Add
`PRINT_ABSTRACTION'.
(probe): Probe for abstraction type when requested.
(main): Understand `--target=abstraction'.
* util/i386/efi/grub-install.in: Add abstraction module to core
image when it is found to be necessary.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Likewise.
* util/update-grub_lib.in (font_path): Return system path without
converting to GRUB path.
* util/update-grub.in: Convert system path returned by font_path()
to a GRUB path. Use `grub-probe -t abstraction' to determine what
abstraction module is needed for loading fonts (if any). Export
that as `GRUB_PRELOAD_MODULES'.
* util/grub.d/00_header.in: Process `GRUB_PRELOAD_MODULES' (print
insmod commands).
* util/update-grub_lib.in (grub_file_is_not_garbage): New function.
Determines if a file is garbage left by packaging systems, etc.
* util/update-grub.in: Use grub_file_is_not_garbage() as a condition
for processing /etc/grub.d scripts.
* util/grub.d/10_hurd.in: Fix `GRUB_DISTRIBUTOR' comparison.
* util/grub.d/10_linux.in: Likewise. Use grub_file_is_not_garbage()
as a condition for processing Linux images.
* kern/device.c (grub_device_iterate): Do not abort device iteration
when one of the devices cannot be opened.
* kern/disk.c (grub_disk_open): Do not account previous failures of
unrelated functions when grub_errno is checked for.
* loader/i386/pc/linux.c (grub_rescue_cmd_linux): For
`! grub_linux_is_bzimage', change order of address comparison to make
it more intuitive, and improve "too big zImage" error message.
* boot/i386/pc/boot.S (boot_drive_check): Add a comment indicating
which instruction is modified by grub-setup during installation
(since it wasn't obvious by only looking at this file).
* fs/reiserfs.c (grub_reiserfs_get_key_v2_type): Handle endianness
correctly.
(grub_reiserfs_get_key_offset): Likewise.
(grub_reiserfs_set_key_offset): Likewise.
(grub_reiserfs_set_key_type): Likewise.
(grub_reiserfs_iterate_dir): Return 1 if found, otheriwise 0.
(GRUB_REISERFS_KEYV2_BITFIELD): Undefined. Probably it would be
better to remove the bitfield version completely.
* fs/reiserfs.c (grub_reiserfs_iterate_dir): ENTRY_ITEM must be
allocated from the heap, due to the fshelp implementation.
(grub_reiserfs_dir): Free NODE, due to the same reason.
* include/grub/normal.h (grub_env_write_color_normal): New prototype.
(grub_env_write_color_highlight): Likewise.
(grub_wait_after_message): Likewise.
* normal/color.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-efi.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-linuxbios.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* normal/menu_entry.c (run): Rely on grub_wait_after_message()
for waiting after a message is printed.
* normal/main.c (read_config_file): Likewise.
(grub_normal_init): Register grub_env_write_color_normal() and
grub_env_write_color_highlight() hooks. Mark `color_normal' and
`color_highlight' variables as global.
* normal/menu.c (grub_wait_after_message): New function.
(grub_color_menu_normal): New variable. Replaces ...
(GRUB_COLOR_MENU_NORMAL): ... this macro.
(grub_color_menu_highlight): New variable. Replaces ...
(GRUB_COLOR_MENU_HIGHLIGHT): ... this macro.
(draw_border): Set color state to `GRUB_TERM_COLOR_NORMAL' instead of
`GRUB_TERM_COLOR_STANDARD'.
(print_message): Use `grub_setcolorstate' to reload colors. Rename
`normal_code' and `highlight_code' to `old_color_normal' and
`old_color_highlight', respectively.
(grub_menu_init_page): Update colors when drawing the menu, based on
`menu_color_normal' and `menu_color_highlight' variables.
(grub_menu_run): Rely on grub_wait_after_message() for waiting after
a message is printed.
* kern/i386/linuxbios/init.c: Put "void" to all function
declarations with no arguments.
* kern/powerpc/ieee1275/init.c: Likewise.
* term/i386/pc/at_keyboard.c: Likewise.
* term/i386/pc/vga_text.c: Likewise.
* util/grub-mkdevicemap.c: Likewise.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Improve error
message when loaded image is out of bounds.
(grub_multiboot_load_elf64): Likewise.
* include/grub/video.h: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_adapter): Added unmap_color and get_active_render_target.
* video/video.c: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_get_info): Changed method to accept NULL pointer as an
argument to allow detection of active video adapter.
* video/i386/pc/vbe.c: Renamed grub_video_vbe_unmap_color as
grub_video_vbe_unmap_color_int.
Added grub_video_vbe_unmap_color and
grub_video_vbe_get_active_render_target.
(grub_video_vbe_adapter): Added unmap_color and
get_active_render_target.
* video/i386/pc/vbeblit.c: Replaced grub_video_vbe_unmap_color usage
with grub_video_vbe_unmap_color_int.
* term/gfxterm.c (DEFAULT_STANDARD_COLOR): Added.
(DEFAULT_NORMAL_COLOR): Likewise.
(DEFAULT_HIGHLIGHT_COLOR) Likewise.
(DEFAULT_FG_COLOR): Removed.
(DEFAULT_BG_COLOR): Likewise.
(DEFAULT_CURSOR_COLOR): Changed value.
(grub_virtual_screen): Added standard_color_setting,
normal_color_setting, highlight_color_setting and term_color.
(grub_virtual_screen): Removed fg_color_setting and bg_color_setting.
(bitmap_width): Added.
(bitmap_height): Likewise.
(bitmap): Likewise.
(set_term_color): Likewise.
(grub_virtual_screen_setup): Changed to use new terminal coloring
settings.
(grub_gfxterm_init): Added init for bitmap.
(grub_gfxterm_fini): Added destroy for bitmap.
(redraw_screen_rect): Updated to use background bitmap and new
terminal coloring.
(scroll_up): Added optimization for case when there is no bitmap.
(grub_gfxterm_cls): Fixed to use correct background color.
(grub_virtual_screen_setcolorstate): Changed to use new terminal
coloring.
(grub_virtual_screen_setcolor): Likewise.
(grub_virtual_screen_getcolor): Added.
(grub_gfxterm_background_image_cmd): Likewise.
(grub_video_term): Added setcolor and getcolor.
(MOD_INIT): Added registration of background_image command.
(MOD_TERM): Added unregistration for background_image command.
* include/grub/term.h (struct grub_term): Add `getcolor' function.
(grub_getcolor): New function.
* kern/term.c (grub_getcolor): New function.
* normal/menu.c (GRUB_COLOR_MENU_NORMAL): New macro.
(GRUB_COLOR_MENU_HIGHLIGHT): New macro.
(print_entry): Set normal and highlight colors to
`GRUB_COLOR_MENU_NORMAL' and `GRUB_COLOR_MENU_HIGHLIGHT',
respectively, before printing and restore them to old
values afterwards.
(grub_menu_init_page): Likewise. Fill an additional colored space
that would otherwise be left blank.
* term/efi/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/ieee1275/ofconsole.c (grub_ofconsole_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/serial.c (grub_serial_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vesafb.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vga.c (grub_vga_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/gfxterm.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* configure.ac: Search for possible unifont.hex locations, and
define UNIFONT_HEX if found.
* Makefile.in (UNIFONT_HEX): Define variable.
(DATA): Rename to ...
(PKGLIB): ... this. Update all users.
(PKGDATA): New variable.
(pkgdata_IMAGES): Rename to ...
(pkglib_IMAGES): ... this. Update all users.
(pkgdata_MODULES): Rename to ...
(pkglib_MODULES): ... this. Update all users.
(pkgdata_PROGRAMS): Rename to ...
(pkglib_PROGRAMS): ... this. Update all users.
(pkgdata_DATA): Rename to ...
(pkglib_DATA): ... this. Update all users.
(CLEANFILES): Redefine to `$(pkglib_DATA) $(pkgdata_DATA)'.
(unicode.pff, ascii.pff): New rules.
(all-local): Add `$(PKGDATA)' dependency.
(install-local): Process `$(PKGDATA)'.
* util/update-grub_lib.in (font_path): Search for *.pff files in
a few more locations, including `${pkgdata}'.
* util/grub-mkdevicemap.c (make_device_map): Iterate up to 20 for
IDE disk check, since Linux is known to support 20 IDE disks.
Reported by Colin Watson.
linker. If yes, add it to TARGET_LDFLAGS. Build ID causes
objcopy to generate incorrect binary files (binutils
2.17.50.0.18-1 as shipped by Fedora 8).
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Use LDFLAGS when
linking, so that build ID doesn't break the test.
* util/console.c (grub_ncurses_getkey): Change curses KEY_* mapping,
now return control chars instead of GRUB_CONSOLE_KEY_* constants.
This fixes the problem that function keys did not work in grub-emu.
* disk/host.c (grub_host_open): Remove attribute unused from
name parameter. Add check for "host". This fixes the problem
that grub-emu does not find partitions.
* include/grub/i386/efi/machine.h: New file.
* include/grub/i386/linuxbios/machine.h: Likewise.
* include/grub/i386/pc/machine.h: Likewise.
* include/grub/powerpc/ieee1275/machine.h: Likewise.
* include/grub/sparc64/ieee1275/machine.h: Likewise.
* term/i386/pc/serial.c: Include <grub/machine/machine.h>.
(serial_hw_io_addr): New variable.
(serial_hw_get_port): Obtain port address from `serial_hw_io_addr'
instead of `(unsigned short *) 0x400'.
* kern/disk.c (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): New variables.
* include/grub/disk.h (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): Likewise.
* disk/i386/pc/biosdisk.c (GRUB_MOD_FINI(biosdisk)): Moved from here ...
(grub_disk_biosdisk_fini): ... to here.
(GRUB_MOD_FINI(biosdisk)): Implement using grub_disk_biosdisk_fini().
(GRUB_MOD_INIT(biosdisk)): Abort when `grub_disk_firmware_is_tainted'
is set. Register grub_disk_biosdisk_fini() in
`grub_disk_firmware_fini'.
* disk/ata.c: Remove `<grub/machine/biosdisk.h>'.
(GRUB_MOD_INIT(ata)): Remove grub_biosdisk_fini() call.
Use `grub_disk_firmware_is_tainted' and `grub_disk_firmware_fini'
to finish existing firmware disk interface.
* conf/i386-linuxbios.rmk (pkgdata_MODULES): Add `ata.mod'.
(ata_mod_SOURCES): New variable.
(ata_mod_CFLAGS): Likewise.
(ata_mod_LDFLAGS): Likewise.
* term/i386/pc/vga_text.c: Include <grub/cpu/io.h>.
(CRTC_ADDR_PORT): New macro.
(CRTC_DATA_PORT): Likewise.
(CRTC_CURSOR): Likewise.
(CRTC_CURSOR_ADDR_HIGH): Likewise.
(CRTC_CURSOR_ADDR_LOW): Likewise.
(update_cursor): New function.
(grub_console_real_putchar): Call `update_cursor'.
(grub_console_gotoxy): Likewise.
(grub_console_cls): Set the default color when clearing the
screen.
(grub_console_setcursor): Implemented.
* disk/ata.c (grub_ata_pio_read): Don't wait for the command to
become activate.
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Wait after issuing an ATA command.
(grub_atapi_packet): Likewise.
(grub_ata_identify): Likewise.
(grub_ata_readwrite): Likewise.
* disk/ata.c (grub_ata_pio_read): Detect and return the error code.
(grub_ata_pio_write): Likewise.
(grub_ata_readwrite): Use `grub_error', instead of
returning `grub_errno'.
* include/grub/i386/pc/init.h (grub_lower_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_lower_mem): ... to here.
* include/grub/i386/pc/init.h (grub_upper_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_upper_mem): ... to here.
* include/grub/i386/pc/memory.h: Include `<grub/symbol.h>' and
`<grub/types.h>'.
* loader/i386/pc/multiboot.c: Include `<grub/machine/memory.h>'.
* genmk.rb (Image): Copy `extra_flags' from here ...
(PModule): ... to here. Use it in `#{obj}: #{src}' rule.
* commands/i386/cpuid.c (grub_cmd_cpuid): Add __attribute__ ((unused))
to `argc' and `args' arguments.
* kern/i386/loader.S: New file.
* kern/i386/pc/startup.S (grub_linux_prot_size): Moved from here ...
* kern/i386/loader.S (grub_linux_prot_size)... to here.
* kern/i386/pc/startup.S (grub_linux_tmp_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_tmp_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_real_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_real_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_zimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_zimage)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_bzimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_bzimage)... to here.
* kern/i386/pc/startup.S (grub_multiboot_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot_real_boot)... to here.
* kern/i386/pc/startup.S (grub_multiboot2_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot2_real_boot)... to here.
* kern/i386/realmode.S: New file.
* kern/i386/pc/startup.S (protstack): Moved from here ...
* kern/i386/realmode.S (protstack)... to here.
* kern/i386/pc/startup.S (gdt): Moved from here ...
* kern/i386/realmode.S (gdt)... to here.
* kern/i386/pc/startup.S (prot_to_real): Moved from here ...
* kern/i386/realmode.S (prot_to_real)... to here.
* kern/i386/pc/startup.S: Include `kern/i386/loader.S' and
`kern/i386/realmode.S'.
* normal/misc.c (grub_normal_print_device_info): Do not probe for
filesystem when dev->disk is unset.
Do probe for filesystem even when dev->disk->has_partitions is set.
In case a filesystem is found, always report it.
In case it isn't, if dev->disk->has_partitions is set, report that
a partition table was found instead of reporting that no filesystem
could be identified.
* kern/powerpc/ieee1275/init.c: Rename HEAP_LIMIT to HEAP_MAX_ADDR,
and make it easier to figure out.
Add HEAP_MIN_SIZE and HEAP_MAX_ADDR definitions.
(grub_claim_heap): Use HEAP_MAX_ADDR rather than taking a parameter.
Do not avoid claiming a region above HEAP_MAX_ADDR if that would
leave us with less than HEAP_MIN_SIZE total heap.
Avoid our total amount of heap to surpass HEAP_MAX_SIZE.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_test_flag): Detect
SmartFirmware version updates (as released by Sven Luther), and avoid
setting GRUB_IEEE1275_FLAG_NO_PARTITION_0 or
GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS unless the running version is
known broken.
Do not use devices at boot in chainloading.
* loader/i386/pc/chainloader.c (boot_drive): New variable.
(boot_part_addr): Likewise.
(grub_chainloader_boot): Simply call grub_chainloader_real_boot
with BOOT_DRIVE and BOOT_PART_ADDR.
(grub_chainloader_cmd): Set BOOT_DRIVE and BOOT_PART_ADDR.
Reported by Hitoshi Ozeki <h-ozeki@ck2.so-net.ne.jp>.
Patch from Simon Peter <dn.tlp@gmx.net>:
* genmk.rb (Utility): Append $(#{src}_DEPENDENCIES) to #{obj} targets.
* conf/i386-pc.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES. Replace grub-setup_DEPENDENCIES with
util/i386/pc/grub-setup.c_DEPENDENCIES.
* conf/i386-efi.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES.
* conf/powerpc-ieee1275.rmk: Likewise.
for powerpc & i386-pc. This patch was more so started by Hollis
Blanchard getting multiboot 2 working for powerpc and I added to it
and cleaned it up.
One of the ideas with this patch is to keep everything under one
command for the user. So instead of having a "multiboot2" & "module2"
command, I created a proxy like mechanism so that you have only one
command for both multiboot 1 & 2 ... "multiboot". This is where
"loader/multiboot_loader.c" comes from. I could have integrated things
more but I figure the current approach will less likely break
anything.
So if your OS is multiboot 2 capable, the user would do the following
to load it up from a grub prompt:
grub> multiboot <location of kernel> <kernel args>
grub> module <some image> <multiboot tag> <image arguments>
grub> module <isome mage> <multiboot tag> <image arguments>
grub .....
The other thing that this patch does is it begins to make the
multiboot 1 code a bit more architecture agnostic so IF someone wanted
to implement it on another architecture they can.
A bit of file moving around and definition renaming is also apart of
this patch. I have also taken the time to make sure that it does not
break multiboot 1 loading on i386-pc. But mulitboot 2 may still need a
little more testing and work for i386-pc. Powerpc multiboot 2 has been
heavily tested and does work.
* geninitheader.sh: Process file specified in first parameter rather
than hardcoding grub_modules_init.lst.
* geninit.sh: Likewise. Also, construct header name dynamicaly rather
than hardcoding grub_modules_init.h.
* conf/common.rmk: Rename grub_modules_init.[ch] files associated with
grub-emu to grub_emu_init.[ch]. Add rules to build analogous
grub_probe_init.[ch] and grub_setup_init.[ch].
* conf/powerpc-ieee1275.rmk (grub_emu_DEPENDENCIES): Replace
grub_modules_init.h with grub_emu_init.h.
(grub_probe_DEPENDENCIES, grub_probe_SOURCES): Add new
grub_probe_init.[ch] files.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
(grub_setup_DEPENDENCIES, grub_setup_SOURCES): Add new
grub_setup_init.[ch] files.
* util/grub-emu.c: Replace grub_modules_init.h with grub_emu_init.h.
* util/grub-probe.c: Include grub_probe_init.h. Use grub_init_all()
to initialize modules rather than a list of hardcoded functions.
* util/i386/pc/grub-setup.c: Include grub_setup_init.h. Use
grub_init_all() to initialize modules rather than a list of hardcoded
functions.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
GRUB_IEEE1275_FLAG_BROKEN_OUTPUT flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Set this
flag when running on SmartFirmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid running
"output-device output" command when GRUB_IEEE1275_FLAG_BROKEN_OUTPUT
was set.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_encode_devname):
Increase partno when GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS flag is set,
rather than decreasing it.
* util/i386/pc/grub-setup.c (setup): When embedding is required, but
there's not enough space to do it, fail in the same way as when it
can't be done because there are no partitions.
* util/powerpc/ieee1275/grub-install.in: Improve error message shown
when nvsetenv failed.
* conf/i386-pc.rmk (CLEANFILES): Removed for grub-mkrescue,
because this rule is automatically generated.
(grub-mkrescue): Removed for the same reason as above.
* util/i386/efi/grub-install.in: Allow `grub_probe --target=partmap'
invocation to fail, in order to support partition-less media.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Use grub-probe to determine
which fs or partmap modules are needed (akin to its sister scripts).
Also use grub-probe to get rid of unportable /proc/mounts check.
Print the same informational message that the other scripts do, before
exitting.
* util/update-grub_lib.in (font_path): New function. Determine wether
a font file can be found and, if so, echo the GRUB path to it.
* util/update-grub.in: Handle multiple terminals depending on user
input, platform availability and font file presence. Propagate
variables of our findings to /etc/grub.d/ children.
* util/grub.d/00_header.in: Handle multiple terminals, based on
environment setup by update-grub.
* include/grub/i386/pc/kernel.h: Define GRUB_KERNEL_MACHINE_DATA_END to
indicate end of data section in kernel image.
* include/grub/i386/efi/kernel.h: Define GRUB_KERNEL_MACHINE_PREFIX and
GRUB_KERNEL_MACHINE_DATA_END.
* kern/i386/pc/startup.S: Do not initialize grub_prefix, only reserve
space for it.
* kern/i386/efi/startup.S: Likewise.
* util/i386/pc/grub-mkimage.c: Initialize grub_prefix to /boot/grub
during image generation. Implement --prefix option to override this
patch.
* util/i386/efi/grub-mkimage.c: Likewise.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
* include/grub/util/misc.h: Define DEFAULT_DIRECTORY and
DEFAULT_DEVICE_MAP.
* util/grub-emu.c: Use above definitions from misc.h instead of
defining them.
* util/grub-mkdevicemap.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-probe.c: Likewise.
(probe): Abort with grub_util_error() when either
grub_guess_root_device or grub_util_get_grub_dev fails.
* normal/command.c (grub_command_execute): Use NULL rather than 0 for
"pager" assignment.
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Likewise for
"pcdata".
* util/grub-probe.c (probe): Likewise for "drive_name".
* util/i386/pc/grub-mkrescue.in: Add "set -e".
Add --pkglibdir=DIR option to override pkglibdir.
Mention --image-type=TYPE in help output.
Fix --grub-mkimage (it was a no-op).
Abort gracefuly when no parameter is given.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Abort if
file doesn't exist, or if it is in a filesystem grub can't read.
* util/update-grub.in: Set fallback for GRUB_FS check to "unknown". Do
not abort if GRUB_DRIVE could not be defined. Rearrange generated
header comment to fit in 80 columns when the variables are resolved.
* util/grub.d/00_header.in: Only set root variable when GRUB_DRIVE
could be identified by update-grub. Remove redundant check for
unifont.pff existance (since convert_system_path_to_grub_path now
handles that).
* conf/powerpc-ieee1275.rmk: Enable grub-mkdevicemap and grub-probe.
* include/grub/partition.h: Declare grub_apple_partition_map_init and
grub_apple_partition_map_fini.
* util/biosdisk.c
(grub_util_biosdisk_open): Replace BLKGETSIZE with BLKGETSIZE64 (needed
to access >2 TiB disks).
Print disk->total_sectors with %llu instead of %lu, since this
variable is always 64-bit (prevents wrong disk size from being displayed
on either >2 TiB disk or big-endian CPU).
(grub_util_biosdisk_get_grub_dev): Convert gpt_partition_map handling
into a generic case that supports all (sane) partition maps.
Stop using grub_cpu_to_le32() on dos_part / bsd_part since it actually
breaks big-endian.
* util/grub-probe.c: Call grub_apple_partition_map_init() before probe()
and grub_apple_partition_map_fini() after that.
* util/update-grub_lib.in: New file.
* DISTLIST: Add update-grub_lib.in.
* conf/common.rmk: Generate update-grub_lib and install it in
$(lib_DATA).
* Makefile.in: Add install routine for $(lib_DATA).
* util/grub.d/00_header.in: Use convert_system_path_to_grub_path()
function provided by update-grub_lib to support arbitrary paths of
unifont.pff.
* util/update-grub.in: Use convert_system_path_to_grub_path() to
initialize GRUB_DRIVE_BOOT and GRUB_DRIVE_BOOT_GRUB variables.
* util/biosdisk.c (linux_find_partition): Allocate real_dev on the
stack instead of on the heap.
* kern/disk.c (grub_disk_read): Make sure tmp_buf is big enough
before doing a read on it.
* configure.ac: Only use -fno-stack-protector for the target
environment.
* util/getroot.c (grub_guess_root_device): Remove RAID and LVM
code, first search for device in /dev/mapper, then in /dev.
(grub_util_get_grub_dev): New function.
* include/grub/util/getroot.h (grub_util_get_grub_dev): Add
prototype.
* util/grub-probe.c (probe): Remove check for RAID, call
grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/grub-emu.c (main): Call grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/i386/pc/grub-setup.c (main): Likewise.
* DISTLIST: Update for the latest changes.
* conf/i386-pc.rmk: Use the new paths for util/getroot.c,
util/grub-mkdevicemap.c, util/grub-probe.c and util/biosdisk.c.
* util/grub-emu.c: Replace grub/i386/pc/util/biosdisk.h with
grub/util/biosdisk.h.
* util/i386/pc/grub-setup.c: Replace grub/machine/util/biosdisk.h with
grub/util/biosdisk.h.
* include/grub/i386/pc/util/biosdisk.h: Moved to ...
* include/grub/util/biosdisk.h: ... here.
* util/i386/pc/biosdisk.c: Moved to ...
* util/biosdisk.c: ... here.
* util/i386/pc/getroot.c: Moved to ...
* util/getroot.c: ... here.
* util/i386/pc/grub-mkdevicemap.c: Moved to ...
* util/grub-mkdevicemap.c: ... here.
* util/i386/pc/grub-probe.c: Moved to ...
* util/grub-probe.c: ... here.
* util/update-grub.in: Fix a few assumptions about the devices holding
/, /boot and /boot/grub being the same.
* util/grub.d/00_header.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/10_linux.in: Implement Linux image sorting with arbitrary
patterns. Use that to define the `.old' suffix as older than `'.
* util/grub.d/00_header.in: Set default gfxmode to `800x600x16'.
* util/update-grub.in: Add a reference to ${sysconfdir}/default/grub in
the grub.cfg header message.
* util/update-grub.in: Create device.map if it doesn't already exist,
before attempting to run grub-probe.
Check for grub-probe and grub-mkdevicemap with the same code
grub-install is using.
Remove test mode.
* util/i386/pc/grub-probe.c: Add `grub-probe -t partmap' parameter to
determine partition map module.
* util/i386/pc/grub-install.in: Use this feature to decide which
partition module to load, instead of hardcoding pc and gpt.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add partmap/gpt.c.
(grub_probe_SOURCES): Likewise.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_get_grub_dev): Detect
GPT and initialize dos_part and bsd_part accordingly.
* util/i386/pc/grub-setup.c (setup): Ditto for install_dos_part and
install_bsd_part.
(main): Activate gpt module for use during partition identification,
and deactivate it afterwards.
* util/i386/pc/grub-install.in: Add gpt module to core.img.
* util/i386/pc/grub-probe.c (main): Activate gpt module for use during
partition identification, and deactivate it afterwards.
* util/grub-emu.c: Move initialization functions
grub_util_biosdisk_init() and grub_init_all() before
grub_util_biosdisk_get_grub_dev(), which relies on them.
./configure --program-transform-name="s/grub/grub2/"
And the installed files (in this case for i386-pc) will be:
/usr/lib/grub2/i386-pc/*
/usr/local/sbin/grub2-emu
/usr/local/sbin/grub2-install
...etc
Also grub2-install place boot files in "/boot/grub2"
This allows easy integration into distributions as it allows grub2 to
sit side by side with a grub legacy install without.
* fs/ext2.c (EXT2_GOOD_OLD_REVISION): New macro.
(EXT2_GOOD_OLD_INODE_SIZE): Likewise.
(EXT2_REVISION): Likewise.
(EXT2_INODE_SIZE): Likewise.
(struct grub_ext2_block_group): Added a missing member
"used_dirs".
(grub_ext2_read_inode): Divide by the inode size in a superblock
instead of 128 to obtain INODES_PER_BLOCK.
Use the macro EXT2_INODE_SIZE instead of directly using
SBLOCK->INODE_SIZE.
* fs/ext2.c (grub_ext2_read_inode): Use the inode size in a
superblock instead of the structure size to compute an
offset. This fixes the problem that GRUB could not read a
filesystem when inode size is different from 128-byte.
* conf/powerpc-ieee1275.rmk (kernel_elf_LDFLAGS): Link at 64KB.
* kern/powerpc/ieee1275/init.c (_end): Add declaration.
(_start): Likewise.
(grub_arch_modules_addr): Return address after `_end'.
* util/powerpc/ieee1275/grub-mkimage.c: Include grub/misc.h.
(load_modules): Use new parameter as `p_paddr' and `p_vaddr'.
(add_segments): Calculate `_end' from phdr size and location.
(ALIGN_UP): Moved to ...
* include/grub/misc.h: here.
* include/grub/powerpc/ieee1275/kernel.h (GRUB_IEEE1275_MOD_ALIGN):
New macro.
(GRUB_IEEE1275_MODULE_BASE): Removed.
* Makefile.in (enable_grub_emu): New variable.
* configure.ac (--enable-grub-emu): New option.
Do the checks for (n)curses only if `--enable-grub-emu' is requested.
* conf/i386-efi.rmk (sbin_UTILITIES): Add `grub-emu' only if requested.
* conf/i386-pc.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/sparc64-ieee1275.rmk (bin_UTILITIES): Likewise.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_MENU'.
* kern/env.c (grub_env_unset): Don't free the member `value' when
the type is GRUB_ENV_VAR_DATA, in this case it's a user defined
pointer.
* normal/main.c (current_menu): Removed.
(free_menu): Unset the `menu' environment variable.
(grub_normal_menu_addentry): Make use of the environment variable
`menu', instead of using the global `current_menu'. Allocate
memory for the sourcecode of this entry.
(read_config_file): New argument `nested', changed all callers.
Only in the case of a new context, initialize a new menu. Set the
`menu' environment variable.
(grub_normal_execute): Don't set and unset the environment
variable `menu' here anymore. Only free the menu when leaving the
context.
* util/i386/pc/biosdisk.c (linux_find_partition): Fixed a memory
leak.
* kern/disk.c (grub_disk_read): When there is a read error, always
try to read only the necessary data.
* conf/i386-pc.rmk (grub_probe_SOURCES): Add disk/lvm.c and
disk/raid.c.
* include/grub/disk.h [GRUB_UTIL] (grub_raid_init): New
prototype.
[GRUB_UTIL] (grub_raid_fini): Likewise.
[GRUB_UTIL] (grub_lvm_init): Likewise.
[GRUB_UTIL] (grub_lvm_fini): Likewise.
* util/i386/pc/grub-probe.c (probe): Check whether DEVICE_NAME is
RAID device and copy DEVICE_NAME to DRIVE_NAME in that case.
(main): Call grub_raid_init(), grub_lvm_init(), grub_lvm_fini()
and grub_raid_fini().
* kern/elf.c (grub_elf_file): Call grub_file_seek. Call
grub_error_push and grub_error_pop in the error-handling path.
(grub_elf32_load_segment): Only call grub_file_read with non-zero
length.
2006-10-18 Jeroen Dekkers <jeroen@dekkers.cx>
* disk/lvm.c: Rename VGS to VG_LIST.
(grub_lvm_iterate): Change VGS->LV to VG-LV.
(grub_lvm_open): Likewise.
Thanks to Michael Guntsche for finding this bug.
* util/i386/pc/grub-probe.c (probe): Print DEVICE_NAME instead of
DRIVE_NAME when grub_util_biosdisk_get_grub_dev fails. Open
DRIVE_NAME instead of DEVICE_NAME. Make sure that DEVICE_NAME and
DRIVE_NAME are always freed.
* util/i386/pc/biosdisk.c (make_device_name): Add one into
DOS_PART, as a DOS partition is counted from one instead of zero
now. Reported by Robert Millan.
* util/i386/pc/getroot.c (grub_guess_root_device): Stop using
grub_util_biosdisk_get_grub_dev to convert system device to GRUB device.
* util/grub-emu.c (main): Use grub_util_biosdisk_get_grub_dev with the
string returned by grub_guess_root_device.
* util/i386/pc/grub-setup.c: Likewise.
* util/i386/pc/grub-probefs.c: Likewise.
* util/i386/pc/grub-probefs.c: Rename to ...
* util/i386/pc/grub-probe.c: ... this.
* DISTLIST: Remove grub-probefs, add grub-probe.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
* util/i386/pc/grub-install.in: Likewise.
* util/i386/pc/grub-probe.c: Add --target=(fs|device|drive) option to
choose which information we want to print.
* DISTLIST: Added commands/echo.c, disk/lvm.c, disk/raid.c,
include/grub/bitmap.h, include/grub/lvm.h, include/grub/raid.h,
include/grub/i386/pc/vbeutil.h, include/grub/util/lvm.h,
include/grub/util/raid.h, util/lvm.c, util/raid.c, video/bitmap.c,
video/readers/tga.c and video/i386/pc/vbeutil.c.
2006-10-14 Jeroen Dekkers <jeroen@dekkers.cx>
Added support for RAID and LVM.
* disk/lvm.c: New file.
* disk/raid.c: Likewise.
* include/grub/lvm.h: Likewise.
* include/grub/raid.h: Likewise.
* include/grub/util/lvm.h: Likewise.
* include/grub/util/raid.h: Likewise.
* util/lvm.c: Likewise.
* util/raid.c: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_RAID_ID and GRUB_DISK_DEVICE_LVM_ID.
(grub_disk_get_size): New prototype.
* kern/disk.c (grub_disk_open): Check whether grub_partition_probe()
returns a partition.
(grub_disk_get_size): New function.
* kern/i386/pc/init.c (make_install_device): Copy the prefix
verbatim if grub_install_dos_part is -2.
* util/i386/pc/getroot.c (grub_guess_root_device): Support RAID
and LVM devices.
* util/i386/pc/grub-setup.c (setup): New argument
MUST_EMBED. Force embedding of GRUB when the argument is
true. Close FILE before returning.
(main): Add support for RAID and LVM.
* conf/common.rmk: Add RAID and LVM modules.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add util/raid.c and
util/lvm.c.
(grub_emu_SOURCES): Add disk/raid.c and disk/lvm.c.
* kern/misc.c (grub_strstr): New function.
* include/grub/misc.h (grub_strstr): New prototype.
* include/grub/powerpc/libgcc.h (__floatdisf): New prototype.
(__cmpdi): Likewise.
* kern/powerpc/ieee1275/openfw.c (grub_devalias_iterate): Pass 0 as
`flags' to `grub_ieee1275_next_property'. Change `pathlen' to type
`grub_ssize_t'.
* kern/powerpc/ieee1275/cmain.c: include grub/misc.h.
* loader/powerpc/ieee1275/linux.c (grub_linux_boot): Change `actual'
to type `grub_ssize_t'.
(grub_rescue_cmd_linux): Cast -1 to `grub_off_t'.
Import from GRUB Legacy (lib/device.c):
* util/i386/pc/grub-mkdevicemap.c (get_i2o_disk_name): New function.
(init_device_map) [__linux__]: Add support for I2O devices.
* util/i386/pc/grub-install.in: Skip menu.lst when removing
/boot/grub/*.lst.
* util/i386/pc/getroot.c: Don't recurse into dotdirs (e.g. ".static").
* util/i386/pc/grub-mkdevicemap.c: Make sure the floppy device exists
before adding it to device.map.
* genmk.rb: Let GCC generate dependenceies the first time it
compiles a file; using the -MD option.
* conf/common.mk: Regenerate.
* conf/i386-pc.mk: Likewise.
* conf/i386-efi.mk: Likewise.
* conf/powerpc-ieee1275.mk: Likewise.
* conf/sparc64-ieee1275.mk: Likewise.
Move the prototypes of grub_setjmp and grub_longjmp to
cpu/setjmp.h, so that each architecture may specify different
attributes.
* include/grub/i386/setjmp.h (grub_setjmp): New prototype.
(grub_longjmp): Likewise.
* include/grub/powerpc/setjmp.h (grub_setjmp): Likewise..
(grub_longjmp): Likewise.
* include/grub/sparc64/setjmp.h (grub_setjmp): Likewise..
(grub_longjmp): Likewise.
* include/grub/setjmp.h [!GRUB_UTIL] (grub_setjmp): Removed.
[!GRUB_UTIL] (grub_longjmp): Removed.
* disk/i386/pc/biosdisk.c (struct grub_biosdisk_drp): Moved to ...
(struct grub_biosdisk_dap): Likewise.
* include/grub/i386/pc/biosdisk.h: ... to here. Also corrected
linkage settings for all functions.
* util/misc.c: Include config.h.
[!HAVE_MEMALIGN]: Do not include malloc.h.
(grub_memalign): Use posix_memalign, if present. Then, use
memalign, if present. Otherwise, emit an error.
* util/grub-emu.c: Do not include malloc.h.
* include/grub/util/misc.h: Include unistd.h. This is required for
FreeBSD, because off_t is defined in unistd.h. Reported by Harley
D. Eades III <hde@foobar-qux.org>.
* configure.ac (AC_GNU_SOURCE): Added.
(AC_CHECK_FUNCS): Check posix_memalign and memalign for the host
type.
* include/grub/types.h (grub_host_addr_t): Rename to
grub_target_addr_t.
(grub_host_off_t): Rename to grub_target_off_t.
(grub_host_size_t): Rename to grub_target_size_t.
(grub_host_ssize_t): Rename to grub_target_ssize_t.
Refer to GRUB_TARGET_SIZEOF_VOID_P to define those variables.
* include/grub/kernel.h (struct grub_module_header): Change type
of OFFSET to grub_target_off_t and type of SIZE to grub_target_size_t.
(grub_module_info): Likewise.
* loader/i386/pc/linux.c (grub_rescue_cmd_initrd): The conditional
of checking LINUX_MEM_SIZE was reverse. Reported by Jesus
Velazquez <jesus.velazquez@gmail.com>.
Count partitions from 1 instead of 0 in the string representation
of partitions. Still use 0-based internally.
* partmap/sun.c (grub_sun_is_valid): A cosmetic change.
(sun_partition_map_iterate): Use grub_partition_t instead of
struct grub_partition *. Cast DESC->START_CYLINDER to
grub_uint64_t after converting the endian.
(sun_partition_map_probe): Subtract 1 for PARTNUM.
(sun_partition_map_get_name): Add 1 to P->INDEX.
* partmap/pc.c (grub_partition_parse): Subtract 1 for
PCDATA->DOS_PART.
(pc_partition_map_get_name): Add 1 into PCDATA->DOS_PART.
* partmap/gpt.c (gpt_partition_map_iterate): Initialize PARTNO to
zero instead of one.
(gpt_partition_map_probe): Subtract 1 for PARTNUM.
(gpt_partition_map_get_name): Add 1 into P->INDEX.
* partmap/apple.c (apple_partition_map_iterate): Change the type
of POS to unsigned.
(apple_partition_map_probe): Subtract 1 for PARTNUM.
(apple_partition_map_get_name): Add 1 into P->INDEX.
* partmap/amiga.c (amiga_partition_map_iterate): Change the type
of POS to unsigned.
(amiga_partition_map_iterate): Cast NEXT to grub_off_t to
calculate the offset of a partition.
(amiga_partition_map_probe): Subtract 1 for PARTNUM.
(amiga_partition_map_get_name): Add 1 into P->INDEX.
* partmap/acorn.c (acorn_partition_map_find): Change the type of
SECTOR to grub_disk_addr_t.
(acorn_partition_map_iterate): Likewise.
(acorn_partition_map_probe): Subtract 1 for PARTNUM.
Change the type of SECTOR to grub_disk_addr_t. Declare P on the
top.
(acorn_partition_map_get_name): Add 1 into P->INDEX.
* kern/i386/pc/init.c (make_install_device): Add 1 into
GRUB_INSTALL_DOS_PART.
* fs/iso9660.c (grub_iso9660_mount): Fixed a reversed
conditional.
Clean up the code to support 64-bit addressing in disks and
files. This change is not enough for filesystems yet.
* util/i386/pc/grub-setup.c (struct boot_blocklist): Change the
type of "start" to grub_uint64_t.
(setup): Change the types of KERNEL_SECTOR and FIRST_SECTOR to
grub_disk_addr_t * and grub_disk_addr_t. Fix the format string in
save_first_sector and save_blocklists. Use grub_le_to_cpu64 to
convert addresses.
* util/i386/pc/biosdisk.c (open_device): Change the type of SECTOR
to grub_disk_addr_t.
* partmap/gpt.c (gpt_partition_map_iterate): Fix the format
string.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* partmap/amiga.c (amiga_partition_map_iterate): Cast RDSK.MAGIC
to char *.
* normal/script.c (grub_script_parse): Remove unused MEMFREE.
* normal/parser.y (YYLTYPE_IS_TRIVIAL): New macro.
* normal/lexer.c (grub_script_yyerror): Specify unused to LEX.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf64): Cast -1
to grub_off_t, to detect an error from grub_file_seek.
(grub_multiboot_load_elf32): Likewise.
* kern/misc.c (grub_strtoul): Use grub_strtoull. Return the
maximum unsigned long value when an overflow is detected.
(grub_strtoull): New function.
(grub_divmod64): Likewise.
(grub_lltoa): use grub_divmod64.
* kern/fs.c (struct grub_fs_block): Change the type of "offset" to
grub_disk_addr_t.
(grub_fs_blocklist_open): Increase P if P is not NULL to advance
the pointer to next character. Use grub_strtoull instead of
grub_strtoul.
(grub_fs_blocklist_read): Change the types of SECTOR, OFFSET and
SIZE to grub_disk_addr_t, grub_off_t and grub_size_t,
respectively.
* kern/file.c (grub_file_read): Prevent an oveflow of LEN, as the
return value is signed.
(grub_file_seek): Change the type of OLD to grub_off_t. Do not
test if OFFSET is less than zero, as OFFSET is unsigned now.
* kern/disk.c (struct grub_disk_cache): Change the type of
"sector" to grub_disk_addr_t.
(grub_disk_cache_get_index): Change the type of SECTOR to
grub_disk_addr_t. Calculate the hash with SECTOR casted to
unsigned after shifting.
(grub_disk_cache_invalidate): Change the type of SECTOR to
grub_disk_addr_t.
(grub_disk_cache_unlock): Likewise.
(grub_disk_cache_store): Likewise.
(grub_disk_check_range): Change the types of SECTOR, OFFSET, SIZE,
START and LEN to grub_disk_addr_t *, grub_off_t *, grub_size_t,
grub_disk_addr_t and grub_uint64_t, respectively.
(grub_disk_read): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of START_SECTOR, LEN and
POS to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
(grub_disk_write): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of LEN and N to
grub_size_t.
* io/gzio.c (struct grub_gzio): Change the types of "data_offset"
and "saved_offset" to grub_off_t.
(test_header): Cast BUF to char *.
(get_byte): Cast GZIO->DATA_OFFSET to grub_off_t. Cast GZIO->INBUF
to char *.
(grub_gzio_read): Change the types of OFFSET and SIZE to
grub_off_t and grub_size_t, respectively.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_FORCE_LBA):
Removed.
(GRUB_BOOT_MACHINE_BOOT_DRIVE): Changed to 0x4c.
(GRUB_BOOT_MACHINE_KERNEL_ADDRESS): Changed to 0x40.
(GRUB_BOOT_MACHINE_KERNEL_SEGMENT): Changed to 0x42.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Changed to 0x4e.
(GRUB_BOOT_MACHINE_LIST_SIZE): Increased to 12.
* include/grub/types.h (grub_off_t): Unconditionally set to
grub_uint64_t.
(grub_disk_addr_t): Changed to grub_uint64_t.
* include/grub/partition.h (struct grub_partition): Change the
types of "start", "len" and "offset" to grub_disk_addr_t,
grub_uint64_t and grub_disk_addr_t, respectively.
(grub_partition_get_start): Return grub_disk_addr_t.
(grub_partition_get_len): Return grub_uint64_t.
* include/grub/misc.h (grub_strtoull): New prototype.
(grub_divmod64): Likewise.
* include/grub/fshelp.h (grub_fshelp_read_file): Change the types
of SECTOR, LEN and FILESIZE to grub_disk_addr_t, grub_size_t and
grub_off_t, respectively.
All callers and references changed.
* include/grub/fs.h (struct grub_fs): Change the type of LEN to
grub_size_t in "read".
All callers and references changed.
* include/grub/file.h (struct grub_file): Change the types of
"offset" and "size" to grub_off_t and grub_off_t,
respectively. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_file_read): Change the type of LEN to grub_size_t.
(grub_file_seek): Return grub_off_t. Change the type of OFFSET to
grub_off_t.
(grub_file_size): Return grub_off_t.
(grub_file_tell): Likewise.
All callers and references changed.
* include/grub/disk.h (struct grub_disk_dev): Change the types of
SECTOR and SIZE to grub_disk_addr_t and grub_size_t in "read" and
"write".
(struct grub_disk): Change the type of "total_sectors" to
grub_uint64_t. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_disk_read): Change the types of SECTOR, OFFSET and SIZE to
grub_disk_addr_t, grub_off_t and grub_size_t, respectively.
(grub_disk_write): Likewise.
All callers and references changed.
* fs/iso9660.c (grub_iso9660_susp_iterate): Cast parameters to
char * for grub_strncmp to silence gcc.
(grub_iso9660_mount): Likewise.
(grub_iso9660_mount): Likewise.
(grub_iso9660_read_symlink): Likewise. Also, remove the nonsense
return statement.
(grub_iso9660_iterate_dir): Likewise.
(grub_iso9660_label): Cast DATA->VOLDESC.VOLNAME to char *.
* fs/hfs.c (grub_hfs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/hfsplus.c (grub_hfsplus_read_file): Likewise.
* fs/jfs.c (grub_jfs_read_file): Likewise.
* fs/minix.c (grub_jfs_read_file): Likewise.
* fs/sfs.c (grub_jfs_read_file): Likewise.
* fs/ufs.c (grub_jfs_read_file): Likewise.
* fs/xfs.c (grub_jfs_read_file): Likewise.
* fs/fat.c (grub_fat_read_data): Change the types of SECTOR, LEN
and SIZE to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
* fs/ext2.c (grub_ext2_read_block): When an error happens, set
BLKNR to -1 instead of returning GRUB_ERRNO.
(grub_ext2_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/affs.c (grub_affs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* font/manager.c (grub_font_get_glyph): Cast BITMAP to char * for
grub_file_read.
* disk/ieee1275/ofdisk.c (grub_ofdisk_read): Fix the format
string. Do not cast SECTOR explicitly.
* disk/i386/pc/biosdisk.c (grub_biosdisk_open): Change the type of
TOTAL_SECTORS to grub_uint64_t. Do not mask DRP->TOTAL_SECTORS.
(grub_biosdisk_rw): Change the types of SECTOR and SIZE to
grub_disk_addr_t and grub_size_t, respectively. If the sector is
over 2TB and LBA mode is not supported, raise an error.
(get_safe_sectors): New function.
(grub_biosdisk_read): Use get_safe_sectors.
(grub_biosdisk_write): Likewise.
* disk/efi/efidisk.c (grub_efidisk_read): Fix the format string.
(grub_efidisk_write): Likewise.
* disk/loopback.c (delete_loopback): Cosmetic changes.
(grub_cmd_loopback): Likewise. Also, test NEWDEV->FILENAME
correctly.
(grub_loopback_open): Likewise.
(grub_loopback_read): Likewise. Also, change the type of POS to
grub_off_t, and fix the usage of grub_memset.
* commands/i386/pc/play.c: Include grub/machine/time.h.
* commands/ls.c (grub_ls_list_files): Use "llu" instead of "d" to
print FILE->SIZE.
* commands/configfile.c: Include grub/env.h.
* commands/cmp.c (grub_cmd_cmp): Do not use ERR, but use
GRUB_ERRNO directly instead. Change the type of POS to
grub_off_t. Follow the coding standard.
* commands/blocklist.c: Include grub/partition.h.
(grub_cmd_blocklist): Return an error if the underlying device is
not a disk. Take the starting sector of a partition into account,
if a partition is used.
* boot/i386/pc/diskboot.S (bootloop): Adapted to the new offset of
a length field.
(lba_mode): Support 64-bit addresses.
(chs_mode): Likewise.
(copy_buffer): Adapted to the new offsets of a length field and a
segment field.
(blocklist_default_start): Allocate 64-bit space.
* boot/i386/pc/boot.S (force_lba): Removed.
(boot_drive): Moved to under KERNEL_SECTOR.
(kernel_sector): Moved to under KENREL_SEGMENT. Allocate 64-bit
space.
(real_start): Set %si earlier. Remove code for FORCE_LBA, since it
is useless.
(lba_mode): Refactored to support a 64-bit address. More size
optimization.
(setup_sectors): Likewise.
* conf/common.rmk (grub_modules_init.lst): Depends on
$(MODSRCFILES). Grep only the files in $(MODSRCFILES). Make sure
that the target does not exist before producing.
(grub_modules_init.h): Remove the target before generating.
(grub_emu_init.c): Likewise.
* genmk.rb (PModule::rule): Add source files into MODSRCFILES.
* configure.ac: Don't set host_m32 for x86_64. Also reset LIBS
for the target-specific tests. Make sure that we also have the
up-to-date target variables for those tests.
* genmk.rb (Image::rule): Set FLAG to CFLAGS or ASFLAGS instead of
TARGET_CFLAGS or TARGET_ASFLAGS. There is no reason why
target-specific flags should be prefixed.
(PModule::rule): Likewise.
* include/grub/script.h (grub_script_cmdif): Renamed field 'bool' to
'exec_to_evaluate'. Renamed field 'true' to 'exec_on_true'. Renamed
field 'false' to 'exec_on_false'.
(grub_script_create_cmdif): Renamed argument names to reflect above
changes.
* normal/execute.c (grub_script_execute_cmdif): Likewise.
* normal/script.c (grub_script_create_cmdif): Likewise.
* fs/hfsplus.c (grub_hfsplus_btree_recoffset): Moved to near the
top.
(grub_hfsplus_btree_recptr): Likewise.
(grub_hfsplus_find_block): Do not take RETRY any longer. Use
FILEBLOCK both to pass a block number and store next block
number.
(grub_hfsplus_read_block): Rewritten heavily to support an extent
overflow file correctly. Specify errors appropriately, because
fshelp expects that GRUB_ERRNO is set when fails. Reuse
grub_hfsplus_btree_recptr to get the pointer to a found key.
(grub_hfsplus_btree_search): Return 1 instead of 0 when no match
is found.
* conf/i386-efi.rmk (pkgdata_MODULES): Added _linux.mod and
linux.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
* DISTLIST: Added loader/i386/efi/linux.c,
loader/i386/efi/linux_normal.c and
include/grub/i386/efi/loader.h.
* loader/i386/efi/linux.c: New file.
* loader/i386/efi/linux_normal.c: Likewise.
* include/grub/i386/efi/loader.h: Likewise.
* commands/blocklist.c: New file.
* DISTLIST: Added commands/blocklist.c.
* term/efi/console.c (grub_console_highlight_color): Use a lighter
color for the background, and a daker color for the foreground.
(grub_console_checkkey): Return READ_KEY.
(grub_console_cls): Set the background to
GRUB_EFI_BACKGROUND_BLACK temporarily to clean out the screen.
* kern/efi/efi.c (grub_efi_exit_boot_services): New function.
* include/grub/i386/linux.h (struct linux_kernel_params): Fixed
the size of "padding5", "hd0_drive_info" and "hd1_drive_info".
* include/grub/efi/efi.h (grub_efi_exit_boot_services): New
prototype.
* include/grub/efi/api.h (GRUB_EFI_TEXT_ATTR): Do not shift
BG. The spec is wrong again.
* include/grub/normal.h [GRUB_UTIL] (grub_blocklist_init): New
prototype.
[GRUB_UTIL] (grub_blocklist_fini): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
commands/blocklist.c.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/common.rmk (pkgdata_MODULES): Added blocklist.mod.
(blocklist_mod_SOURCES): New variable.
(blocklist_mod_CFLAGS): Likewise.
(blocklist_mod_LDFLAGS): Likewise.
* kern/i386/pc/startup.S: Include grub/cpu/linux.h instead of
grub/machine/linux.h
* loader/i386/pc/linux.c: Likewise.
* include/grub/i386/pc/linux.h: Moved to ...
* include/grub/i386/linux.h: ... here.
* include/grub/i386/linux.h (struct linux_kernel_params): New
struct.
Add --with-platform to configure. Use pkglibdir instead of
pkgdatadir. This is reported by Roger Leigh.
* util/powerpc/ieee1275/grub-install.in (datadir): Removed.
(host_vendor): Likewise.
(host_os): Likewise.
(pkgdatadir): Likewise.
(platform): New variable.
(pkglibdir): Likewise.
Use PKGLIBDIR instead of PKGDATADIR.
* util/i386/pc/grub-install.in (datadir): Removed.
(host_vendor): Likewise.
(host_os): Likewise.
(pkgdatadir): Likewise.
(platform): New variable.
(pkglibdir): Likewise.
Use PKGLIBDIR instead of PKGDATADIR.
* util/powerpc/ieee1275/grub-mkimage.c (usage): Use GRUB_LIBDIR
instead of GRUB_DATADIR.
(main): Likewise.
* util/i386/pc/grub-mkimage.c (usage): Likewise.
(main): Likewise.
* util/i386/efi/grub-mkimage.c (usage): Likewise.
(main): Likewise.
* configure.ac (--with-platform): New option.
Use PLATFORM instead of HOST_VENDOR to specify a platform.
* Makefile.in: Include a makefile based on PLATFORM instead of
HOST_VENDOR.
(pkgdatadir): Not appended by the machine type.
(pkglibdir): Appended by the machine type.
(host_vendor): Removed.
(platform): New variable.
(BUILD_CPPFLAGS): Specify GRUB_LIBDIR instead of GRUB_DATADIR.
(install-local): Use PKGLIBDIR instead of PKGDATADIR.
(uninstall): Likewise.
Use the environment context in the menu. Remove the commands
"default" and "timeout", and use variables instead.
* normal/menu.c: Include grub/env.h.
(print_entry): Cast TITLE to silence gcc.
(get_timeout): New function.
(set_timeout): Likewise.
(get_entry_number): Likewise.
(run_menu): Use a default entry, a fallback entry and a timeout
in the environment variables "default", "fallback" and
"timeout". Also, tweak the default entry if it is not within the
current menu entries.
(grub_menu_run): Use a fallback entry in the environment variable
"fallback".
* normal/main.c (read_config_file): Do not initialize
NEWMENU->DEFAULT_ENTRY, NEWMENU->FALLBACK_ENTRY or
NEWMENU->TIMEOUT.
(grub_normal_execute): Use a data slot to store the menu.
* include/grub/normal.h (struct grub_menu): Removed default_entry,
fallback_entry and timeout.
(struct grub_menu_list): Removed.
(grub_menu_list_t): Likewise.
(struct grub_context): Likewise.
(grub_context_t): Likewise.
(grub_context_get): Likewise.
(grub_context_get_current_menu): Likewise.
(grub_context_push_menu): Likewise.
(grub_context_pop_menu): Likewise.
(grub_default_init): Likewise.
(grub_default_fini): Likewise.
(grub_timeout_init): Likewise.
(grub_timeout_fini): Likewise.
* conf/sparc64-ieee1275.rmk (pkgdata_MODULES): Removed default.mod
and timeout.mod.
(normal_mod_SOURCES): Removed normal/context.c.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Removed
commands/default.c, commands/timeout.c and normal/context.c.
(normal_mod_SOURCES): Removed normal/context.c.
* conf/i386-pc.rmk (grub_emu_SOURCES): Removed commands/default.c,
commands/timeout.c and normal/context.c.
(normal_mod_SOURCES): Removed normal/context.c.
* conf/i386-efi.rmk (grub_emu_SOURCES): Removed
commands/default.c, commands/timeout.c and normal/context.c.
(normal_mod_SOURCES): Removed normal/context.c.
* conf/common.rmk (pkgdata_MODULES): Removed default.mod and
timeout.mod.
(default_mod_SOURCES): Removed.
(default_mod_CFLAGS): Likewise.
(default_mod_LDFLAGS): Likewise.
(timeout_mod_SOURCES): Removed.
(timeout_mod_CFLAGS): Likewise.
(timeout_mod_LDFLAGS): Likewise.
* DISTLIST: Removed commands/default.c, commands/timeout.c and
normal/context.c.
* commands/default.c: Removed.
* commands/timeout.c: Likewise.
* normal/context.c: Likewise.
* kern/env.c (struct grub_env_context): Removed "sorted". Renamed
"next" to "prev" for readability.
(struct grub_env_sorted_var): New struct.
(grub_env_context): Renamed to ...
(initial_context): ... this.
(grub_env_var_context): Renamed to ...
(current_context): ... this.
(grub_env_find): Look only at CURRENT_CONTEXT.
(grub_env_context_open): Rewritten to copy exported variables from
previous context.
(grub_env_context_close): Rewritten according to the new
scheme. Also, add an assertion to prevent the initial context from
removed.
(grub_env_insert): Removed the code for the sorted list.
(grub_env_remove): Likewise.
(grub_env_export): Simply mark the variable with
GRUB_ENV_VAR_GLOBAL.
(grub_env_set): A cosmetic change for naming consistency.
(grub_env_get): Likewise.
(grub_env_unset): Likewise.
(grub_env_iterate): Rewritten to sort variables within this
function.
(grub_register_variable_hook): Fixed for naming consistency. Call
grub_env_find again, only if NAME is not found at the first time.
(mangle_data_slot_name): New function.
(grub_env_set_data_slot): Likewise.
(grub_env_get_data_slot): Likewise.
(grub_env_unset_data_slot): Likewise.
* include/grub/env.h (grub_env_var_type): New enum.
(GRUB_ENV_VAR_LOCAL): New constant.
(GRUB_ENV_VAR_GLOBAL): Likewise.
(GRUB_ENV_VAR_DATA): Likewise.
(struct grub_env_var): Removed "sort_next" and "sort_prevp". Added
"type".
(grub_env_set): Replace VAR with NAME for consistency.
(grub_register_variable_hook): Likewise.
(grub_env_export): Specify the name of the argument.
(grub_env_set_data_slot): New prototype.
(grub_env_get_data_slot): Likewise.
(grub_env_unset_data_slot): Likewise.
Extend the loader so that GRUB can accept a loader which comes
back to GRUB when a loaded image exits. Also, this change adds
support for a chainloader on EFI.
* term/efi/console.c: Include grub/misc.h.
(grub_console_checkkey): Display a scan code on the top for
debugging. This will be removed once the EFI port gets stable.
Correct the scan code mapping.
* kern/efi/mm.c (sort_memory_map): Sort in a descending order to
allocate memory from larger regions, in order to reduce the number
of allocated regions. Otherwise, the MacOSX loader panics.
(filter_memory_map): Avoid less than 1MB for compatibility with
other loaders.
(add_memory_regions): Allocate from the tail of a region, if
possible, to avoid allocating a region near to 1MB, for the MacOSX
loader.
* kern/efi/init.c (grub_efi_set_prefix): Specify
GRUB_EFI_IMAGE_HANDLE to grub_efi_get_loaded_image.
* kern/efi/efi.c (grub_efi_get_loaded_image): Accept a new
argument IMAGE_HANDLE and specify it to get a loaded image.
(grub_arch_modules_addr): Specify GRUB_EFI_IMAGE_HANDLE to
grub_efi_get_loaded_image.
(grub_efi_get_filename): Divide the legnth by the size of
grub_efi_char16_t.
(grub_efi_get_device_path): New function.
(grub_efi_print_device_path): Print End Device Path nodes. Divide
the length by the size of grub_efi_char16_t for a file path device
path node.
* kern/loader.c (grub_loader_noreturn): New variable.
(grub_loader_set): Accept a new argument NORETURN. Set
GRUB_LOADER_NORETURN to NORETURN.
All callers changed.
(grub_loader_boot): If GRUB_LOADER_NORETURN is false, do not call
grub_machine_fini.
* include/grub/efi/efi.h (grub_efi_get_device_path): New
prototype.
(grub_efi_get_loaded_image): Take an argument to specify an image
handle.
* include/grub/loader.h (grub_loader_set): Added one more argument
NORETURN.
* disk/efi/efidisk.c (make_devices): Use grub_efi_get_device_path
instead of grub_efi_open_protocol.
(grub_efidisk_get_device_name): Likewise.
(grub_efidisk_close): Print a newline.
(grub_efidisk_get_device_handle): Fixed to use
GRUB_EFI_DEVICE_PATH_SUBTYPE instead of
GRUB_EFI_DEVICE_PATH_TYPE.
* disk/efi/efidisk.c (device_path_guid): Moved to ...
* kern/efi/efi.c (device_path_guid): ... here.
* conf/i386-efi.rmk (pkgdata_MODULES): Added _chain.mod and
chain.mod.
(kernel_mod_HEADERS): Added efi/disk.h.
(_chain_mod_SOURCES): New variable.
(_chain_mod_CFLAGS): Likewise.
(_chain_mod_LDFLAGS): Likewise.
(chain_mod_SOURCES): Likewise.
(chain_mod_CFLAGS): Likewise.
(chain_mod_LDFLAGS): Likewise.
* DISTLIST: Added include/grub/efi/chainloader.h,
loader/efi/chainloader.c and loader/efi/chainloader_normal.c.
* include/grub/efi/chainloader.h: New file.
* loader/efi/chainloader.c: Likewise.
* loader/efi/chainloader_normal.c: Likewise.
* commands/configfile.c (grub_cmd_source): New function.
(GRUB_MOD_INIT): Register the commands `source' and `.'.
(GRUB_MOD_FINI): De-register the commands `source' and `.'.
* normal/execute.c (grub_script_execute_cmd): Change the return
type to `grub_err_t'. Correctly return the error.
(grub_script_execute_cmdline): In case a command line is not a
command or a function, try to interpret it as an assignment.
* fs/hfsplus.c (grub_hfsplus_read_block): Fixed a memory leak.
(grub_hfsplus_iterate_dir): Reordered to skip unknown nodes. Also,
skip a node whose name is obviously invalid as UTF-16,
i.e. contains a NUL character. Stop the iteration when the last
directory entry is found. Instead of using the return value of
grub_hfsplus_btree_iterate_node, store the value in RET and use
it, because the iterator can be stopped by the last directory
entry.
* commands/configfile.c (grub_cmd_configfile): Execute the
configfile within its own context.
* include/grub/env.h (grub_env_context_open): New prototype.
(grub_env_context_close): Likewise.
* kern/env.c (grub_env): Removed.
(grub_env_sorted): Likewise.
(grub_env_context): New variable.
(grub_env_var_context): Likewise.
(grub_env_find): Search both the active context and the global
context.
(grub_env_context_open): New function.
(grub_env_context_close): Likewise.
(grub_env_insert): Likewise.
(grub_env_remove): Likewise.
(grub_env_export): Likewise.
(grub_env_set): Changed to use helper functions to avoid code
duplication.
(grub_env_iterate): Rewritten so both the current context and the
global context are being used.
* normal/command.c (export_command): New function.
(grub_command_init): Register the `export' function.
A new machine-specific function "grub_machine_set_prefix" is
defined. This is called after loading modules, so that a prefix
initialization can use modules. Also, this change adds an
intensive debugging feature for the memory manager via the
configure option "--enable-mm-debug".
* partmap/gpt.c (gpt_partition_map_iterate): Add one more into
PART.LEN.
* kern/sparc64/ieee1275/init.c (abort): Removed.
(grub_stop): Likewise.
(grub_exit): New function.
(grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/powerpc/ieee1275/init.c (grub_set_prefix): Renamed to ...
(grub_machine_set_prefix): ... this.
(grub_machine_init): Do not call grub_set_prefix.
* kern/i386/pc/init.c (grub_machine_set_prefix): New function.
(grub_machine_init): Do not set the prefix here.
* kern/i386/efi/init.c (grub_machine_set_prefix): New function.
* kern/efi/init.c: Include grub/mm.h.
(grub_efi_set_prefix): New function.
* kern/efi/efi.c (grub_exit): Call grub_efi_fini.
(grub_efi_get_filename): New function.
(grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
* kern/mm.c [MM_DEBUG] (grub_malloc): Undefined.
[MM_DEBUG] (grub_realloc): Likewise.
[MM_DEBUG] (grub_free): Likewise.
[MM_DEBUG] (grub_memalign): Likewise.
[MM_DEBUG] (grub_mm_debug): New variable.
[MM_DEBUG] (grub_debug_malloc): New function.
[MM_DEBUG] (grub_debug_free): New function.
[MM_DEBUG] (grub_debug_realloc): New function.
[MM_DEBUG] (grub_debug_memalign): New function.
* kern/misc.c (grub_abort): Print a newline to distinguish
the message.
* kern/main.c (grub_main): Call grub_machine_set_prefix and
grub_set_root_dev after loading modules. This is necessary when
setting a prefix depends on modules.
* include/grub/efi/efi.h (grub_print_device_path): Renamed to ...
(grub_efi_print_device_path): ... this.
(grub_efi_get_filename): New prototype.
(grub_efi_set_prefix): Likewise.
* include/grub/efi/disk.h: Include grub/efi/api.h, grub/symbol.h
and grub/disk.h.
(grub_efidisk_get_device_handle): New prototype.
(grub_efidisk_get_device_name): Likewise.
* include/grub/mm.h: Include config.h.
(MM_DEBUG): Removed.
[MM_DEBUG && !GRUB_UTIL] (grub_mm_debug): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_malloc): New macro.
[MM_DEBUG && !GRUB_UTIL] (grub_realloc): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_memalign): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_free): Likewise.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_malloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_realloc): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_memalign): New prototype.
[MM_DEBUG && !GRUB_UTIL] (grub_debug_free): New prototype.
* include/grub/kernel.h (grub_machine_set_prefix): New prototype.
* disk/efi/efidisk.c: Include grub/partition.h.
(iterate_child_devices): New function.
(add_device): First, compare only last device path nodes, so that
devices are sorted by the types.
(grub_efidisk_get_device_handle): New function.
(grub_efidisk_get_device_name): Likewise.
* configure.ac (--enable-mm-debug): New option to enable the
memory manager debugging feature. This makes the binary much
bigger, so is disabled by default.
Use grub_abort instead of grub_stop, and grub_exit must be
define in each architecture now. Also, this change adds support
for EFI disks.
* util/i386/pc/grub-probefs.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/i386/pc/grub-setup.c: Include grub/term.h.
(grub_getkey): New function.
(grub_term_get_current): Likewise.
* util/misc.c (grub_stop): Renamed to ...
(grub_exit): ... this.
* kern/powerpc/ieee1275/init.c (abort): Renamed to ...
(grub_exit): ... this.
(grub_machine_init): Use grub_abort instead of abort.
(grub_stop): Removed.
* kern/powerpc/ieee1275/cmain.c (cmain): Use grub_abort instead of
abort.
* kern/i386/pc/startup.S (grub_exit): New function.
(cold_reboot): New label.
* kern/efi/init.c: Include grub/efi/disk.h and grub/env.h.
(grub_efi_init): Call grub_efidisk_init.
(grub_efi_fini): Call grub_efidisk_fini.
* kern/efi/efi.c: Include grub/mm.h.
(grub_efi_console_control_guid): Renamed to ...
(console_control_guid): ... this.
(grub_efi_loaded_image_guid): Renamed to ...
(loaded_image_guid): ... this.
(grub_efi_locate_handle): New function.
(grub_efi_open_protocol): Likewise.
(grub_efi_set_text_mode): Use CONSOLE_CONTROL_GUID instead of
GRUB_EFI_CONSOLE_CONTROL_GUID.
(grub_efi_exit): Removed.
(grub_stop): Likewise.
(grub_efi_get_loaded_image): Use grub_efi_open_protocol.
(grub_exit): New function.
(grub_print_device_path): Likewise.
* kern/rescue.c (grub_rescue_cmd_exit): New function.
(grub_enter_rescue_mode): Register "exit".
* kern/misc.c (grub_real_dprintf): A cosmetic change.
(grub_abort): New function.
* kern/err.c (grub_fatal): Use grub_abort instead of grub_stop.
* include/grub/sparc64/ieee1275/kernel.h (abort): Removed.
* include/grub/powerpc/ieee1275/kernel.h (abort): Removed.
* include/grub/efi/efi.h (grub_efi_exit): Removed.
(grub_print_device_path): New prototype.
(grub_efi_locate_handle): Likewise.
(grub_efi_open_protocol): Likewise.
* include/grub/efi/disk.h (grub_efidisk_fini): New file.
* disk/efi/efidisk.c: Likewise.
* DISTLIST: Added disk/efi/efidisk.c and include/grub/efi/disk.h.
* include/grub/efi/console_control.h
(GRUB_EFI_CONSOLE_CONTROL_GUID): Use an array for the last 8 bytes.
* include/grub/efi/api.h (GRUB_EFI_LOADED_IMAGE_GUID): Specify the
last 8 bytes as an array.
(GRUB_EFI_DISK_IO_GUID): New macro.
(GRUB_EFI_BLOCK_IO_GUID): Likewise.
(GRUB_EFI_DEVICE_PATH_GUID): Likewise.
(grub_efi_ipv6_address_t): Change the type to grub_uint16_t from
grub_uint8_t.
(struct grub_efi_guid): Use an array to specify the last 8 bytes.
(struct grub_efi_device_path): Rename the member "sub_type" to
"subtype".
(GRUB_EFI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_DEVICE_PATH_LENGTH): Likewise.
(GRUB_EFI_END_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_THIS_DEVICE_PATH_SUBTYPE): Likewise.
(GRUB_EFI_END_ENTIRE_DEVICE_PATH): Likewise.
(GRUB_EFI_NEXT_DEVICE_PATH): Likewise.
(GRUB_EFI_HARDWARE_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_PCI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_pci_device_path): New structure.
(grub_efi_pci_device_path_t): New type.
(GRUB_EFI_PCCARD_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_pccard_device_path): New structure.
(grub_efi_pccard_device_path_t): New type.
(GRUB_EFI_MEMORY_MAPPED_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_memory_mapped_device_path): New structure.
(grub_efi_memory_mapped_device_path_t): New type.
(GRUB_EFI_VENDOR_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_device_path): New structure.
(grub_efi_vendor_device_path_t): New type.
(GRUB_EFI_CONTROLLER_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_controller_device_path): New structure.
(grub_efi_controller_device_path_t): New type.
(GRUB_EFI_ACPI_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_ACPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_acpi_device_path): New structure.
(grub_efi_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_expanded_acpi_device_path): New structure.
(grub_efi_expanded_acpi_device_path_t): New type.
(GRUB_EFI_EXPANDED_ACPI_HIDSTR): New macro.
(GRUB_EFI_EXPANDED_ACPI_UIDSTR): Likewise.
(GRUB_EFI_EXPANDED_ACPI_CIDSTR): Likewise.
(GRUB_EFI_MESSAGING_DEVICE_PATH_TYPE): Likewise.
(GRUB_EFI_ATAPI_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_atapi_device_path): New structure.
(grub_efi_atapi_device_path_t): New type.
(GRUB_EFI_FIBRE_CHANNEL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_fibre_channel_device_path): New structure.
(grub_efi_fibre_channel_device_path_t): New type.
(GRUB_EFI_1394_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_1394_device_path): New structure.
(grub_efi_1394_device_path_t): New type.
(GRUB_EFI_USB_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_device_path): New structure.
(grub_efi_usb_device_path_t): New type.
(GRUB_EFI_USB_CLASS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_usb_class_device_path): New structure.
(grub_efi_usb_class_device_path_t): New type.
(GRUB_EFI_I2O_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_i2o_device_path): New structure.
(grub_efi_i2o_device_path_t): New type.
(GRUB_EFI_MAC_ADDRESS_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_mac_address_device_path): New structure.
(grub_efi_mac_address_device_path_t): New type.
(GRUB_EFI_IPV4_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv4_device_path): New structure.
(grub_efi_ipv4_device_path_t): New type.
(GRUB_EFI_IPV6_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_ipv6_device_path): New structure.
(grub_efi_ipv6_device_path_t): New type.
(GRUB_EFI_INFINIBAND_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_infiniband_device_path): New structure.
(grub_efi_infiniband_device_path_t): New type.
(GRUB_EFI_UART_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_uart_device_path): New structure.
(grub_efi_uart_device_path_t): New type.
(GRUB_EFI_VENDOR_MESSAGING_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_messaging_device_path): New structure.
(grub_efi_vendor_messaging_device_path_t): New type.
(GRUB_EFI_MEDIA_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_HARD_DRIVE_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_hard_drive_device_path): New structure.
(grub_efi_hard_drive_device_path_t): New type.
(GRUB_EFI_CDROM_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_cdrom_device_path): New structure.
(grub_efi_cdrom_device_path_t): New type.
(GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_vendor_media_device_path): New structure.
(grub_efi_vendor_media_device_path_t): New type.
(GRUB_EFI_FILE_PATH_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_file_path_device_path): New structure.
(grub_efi_file_path_device_path_t): New type.
(GRUB_EFI_PROTOCOL_DEVICE_PATH_SUBTYPE): New macro.
(struct grub_efi_protocol_device_path): New structure.
(grub_efi_protocol_device_path_t): New type.
(GRUB_EFI_BIOS_DEVICE_PATH_TYPE): New macro.
(GRUB_EFI_BIOS_DEVICE_PATH_SUBTYPE): Likewise.
(struct grub_efi_bios_device_path): New structure.
(grub_efi_bios_device_path_t): New type.
(struct grub_efi_disk_io): New structure.
(grub_efi_disk_io_t): New type.
(struct grub_efi_block_io_media): New structure.
(grub_efi_block_io_media_t): New type.
(struct grub_efi_block_io): New structure.
(grub_efi_block_io_t): New type.
* include/grub/misc.h (grub_stop): Removed.
(grub_exit): New prototype.
(grub_abort): Likewise.
* include/grub/disk.h (enum grub_disk_dev_id): Added
GRUB_DISK_DEVICE_EFIDISK_ID.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Added
disk/efi/efidisk.c.
(kernel_syms.lst): Remove the target if an error occurs.
Add support for pre-loaded modules into the EFI port.
* util/i386/efi/grub-mkimage.c (make_mods_section): Rewritten
completely. Accept one more argument DIR. The caller has changed.
* kern/i386/efi/init.c (grub_arch_modules_addr): Removed.
* kern/efi/efi.c: Include grub/efi/pe32.h and grub/kernel.h.
(grub_efi_loaded_image_guid): New variable.
(grub_efi_get_loaded_image): New function.
(grub_arch_modules_addr): Likewise.
* include/grub/efi/efi.h (grub_efi_get_loaded_image): New
prototype.
* include/grub/efi/api.h (GRUB_EFI_LOADED_IMAGE_GUID): New macro.
(struct grub_efi_loaded_image): New structure.
(grub_efi_loaded_image_t): New type.
* loader/i386/pc/linux.c (grub_rescue_cmd_linux): Compare the file
size with GRUB_OS_AREA_SIZE as grub_size_t instead of
grub_ssize_t. Reported by Jeff Chua <jeff84@silk.corp.fedex.com>.
* normal/command.c (grub_command_init): Remove the title command.
* normal/lexer.c (grub_script_yylex): Renamed from this...
(grub_script_yylex2): ... to this.
(grub_script_yylex): New function. Temporary
introduced to filter some tokens.
(grub_script_yyerror): Print a newline.
* normal/main.c (read_config_file): Output information about the
lines that contain errors. Wait for a key after all lines have
been processed. Don't return an empty menu.
* normal/parser.y (func_mem): Don't initialize.
(menu_entry): Likewise.
(err): New variable.
(script): Don't return anything when an error was encountered.
(ws, returns): Removed rules.
(argument): Disabled concatenated variable support.
(arguments): Remove explicit separators.
(grubcmd): Likewise.
(function): Likewise.
(menuentry): Likewise.
(if): Likewise.
(commands): Likewise. Add error handling.
* normal/script.c (grub_script_create_cmdline): If
`grub_script_parsed' is 0, assume the parser encountered an error.
* DISTLIST: Added include/grub/i386/pc/vbeblit.h,
include/grub/i386/pc/vbefill.h, video/i386/pc/vbeblit.c,
video/i386/pc/vbefill.c.
* conf/i386-pc.rmk (vbe_mod_SOURCES): Added video/i386/pc/vbeblit.c,
video/i386/pc/vbefill.c.
* include/grub/video.h (grub_video_blit_format): New enum.
(grub_video_mode_info): Added new member blit_format.
(grub_video_get_blit_format): New function prototype.
* include/grub/i386/pc/vbe.h (grub_video_vbe_get_video_ptr): New
function prototype.
(grub_video_vbe_map_rgb): Likewise.
(grub_video_vbe_unmap_color): Likewise.
* include/grub/i386/pc/vbeblit.h: New file.
* include/grub/i386/pc/vbefill.h: New file.
* video/video.c (grub_video_get_blit_format): New function.
(grub_video_vbe_get_video_ptr): Re-declared as non-static.
(grub_video_vbe_map_rgb): Likewise.
(grub_video_vbe_unmap_color): Likewise.
* video/i386/pc/vbe.c (grub_video_vbe_fill_rect): Changed to use more
optimized fills.
(grub_video_vbe_blit_render_target): Changed to use more optimized
blits.
(grub_video_vbe_setup): Added detection for optimized settings.
(grub_video_vbe_create_render_target): Likewise.
* video/i386/pc/vbeblit.c: New file.
* video/i386/pc/vbefill.c: New file.
* font/manager.c (grub_font_get_glyph): Removed font fixup from
here...
* util/unifont2pff.rb: ... and moved it to here. Improved argument
parsing to support both hex and dec ranges. If filename was missing
show usage information.
* include/grub/normal.h: Include <grub/script.h>.
(grub_command_list): Removed struct.
(grub_command_list_t): Removed type.
(grub_menu_entry): Remove members `num' and `command_list'. Add
members `commands' and `sourcecode'.
* include/grub/script.h: Add inclusion guards.
(grub_script_cmd_menuentry): New struct.
(grub_script_execute_menuentry): New prototype.
(grub_script_lexer_record_start): Likewise.
(grub_script_lexer_record_stop): Likewise.
* normal/execute.c (grub_script_execute_menuentry): New function.
* normal/lexer.c (record, recording, recordpos, recordlen): New
variables.
(grub_script_lexer_record_start): New function.
(grub_script_lexer_record_stop): Likewise.
(recordchar): Likewise.
(nextchar): Likewise.
(grub_script_yylex): Use `nextchar' to fetch new characters. Use
2048 as the buffer size. Add the tokens `menuentry' and `@'.
* normal/main.c: Include <grub/parser.h> and <grub/script.h>
(current_menu): New variable.
(free_menu): Mainly rewritten.
(grub_normal_menu_addentry): New function.
(read_config_file): Rewritten.
* normal/menu.c (run_menu_entry): Mainly rewritten.
* normal/menu_entry.c (make_screen): Rewritten te code to insert
the menu entry.
(run): Mainly rewritten.
* normal/parser.y (menu_entry): New variable.
(GRUB_PARSER_TOKEN_MENUENTRY): New token.
(menuentry): New rule.
(command): Add `menuentry'.
(if_statement): Allow additional returns before `fi'.
* normal/script.c (grub_script_create_cmdmenu): New function.
* INSTALL: GNU Bison is required.
* configure.ac: Rewritten the test to detect Bison.
* Makefile.in (YACC): New variable. Reported by Xun Sun
<xun.sun.cn@gmail.com>.
* fs/hfsplus.c (grub_hfsplus_read_block): Convert the offset of
the HFS+ filesystem to filesystem blocks.
(grub_hfsplus_iterate_dir): Cast the `fileinfo' assignment so a
GCC warning is silenced.
* fs/hfs.c: Include <grub/hfs.h>. Added reference to the official
documentation.
(GRUB_HFS_EMBED_HFSPLUS_SIG): New macro.
(grub_hfs_mount): Grammar fix in error. Make sure this is not an
embedded HFS+ filesystem.
(GRUB_HFS_MAGIC, grub_hfs_extent, grub_hfs_datarecord_t)
(grub_hfs_sblock): Move from here...
* include/grub/hfs.h: To here... New file.
* fs/hfsplus.c: Include <grub/hfs.h>. Added reference to the official
documentation.
(GRUB_HFSPLUS_MAGIC, GRUB_HFSPLUSX_MAGIC, GRUB_HFSPLUS_SBLOCK):
New macros.
(grub_hfsplus_volheader): Change type of member `magic' to
`grub_uint16_t'.
(grub_hfsplus_data): Add new member `embedded_offset'.
(grub_hfsplus_read_block): Add the HFS+ wrapper offset to the
returned block.
(grub_hfsplus_mount): Read the HFS+ wrapper if it exists.
Calculate the offset.
* kern/err.c (grub_error_push): Added new function to support error
stacks.
(grub_error_pop): Likewise.
(grub_error_stack_items): New local variable to support error stacks.
(grub_error_stack_pos): Likewise.
(grub_error_stack_assert): Likewise.
(GRUB_ERROR_STACK_SIZE): Added new define to configure maximum error
stack depth.
(grub_print_error): Added support to print errors from error stack.
* include/grub/err.h (grub_error_push): Added function prototype.
(grub_error_pop): Likewise.
* conf/common.rmk (grub_modules_init.lst): Use `-printf "%P\n"'
and `cd' to make sure the filename is not prefixed with a
directory name.
(pkgdata_MODULES): Add `gpt.mod'.
(gpt_mod_SOURCES): New variable.
(gpt_mod_CFLAGS): Likewise.
(gpt_mod_LDFLAGS): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Add `partmap/gpt.c'.
* include/grub/pc_partition.h (GRUB_PC_PARTITION_TYPE_GPT_DISK):
New macro.
* partmap/gpt.c: New file.
* partmap/pc.c (pc_partition_map_iterate): Don't continue when a
GPT partition map is detected.
* util/powerpc/ieee1275/grub-install.in (grubdir): Fixed partition
number regex so multidigit numbers are recognized correctly.
* loader/powerpc/ieee1275/linux.c (grub_rescue_cmd_linux): Add a
debugging message before attempting to claim memory.
(grub_rescue_cmd_initrd): Add a claim debugging message and try
multiple addresses in case of failure.
* partmap/acorn.c: Change `unsigned' to `unsigned int'. Move all
variable definitions to the beginning of each function. Sort stack
variables by size.
(find): Rename to `acorn_partition_map_find'. Cast `grub_disk_read'
`buf' argument to `char *'.
* term/ieee1275/ofconsole.c (grub_ofconsole_cls): Use both the ANSI
escape sequence and a literal ^L to clear the screen.
* commands/ieee1275/suspend.c (grub_cmd_suspend): Clear the screen
when returning from Open Firmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_width): New variable.
(grub_ofconsole_height): Likewise.
(grub_ofconsole_putchar): If `grub_curr_x' exceeds console width,
manually insert a '\n'.
(grub_ofconsole_getwh): Set and return `grub_ofconsole_width' and
`grub_ofconsole_height'. Return early if these are already set.
* kern/powerpc/ieee1275/init.c (grub_get_rtc): Initialize `msecs'
to 0.
* term/ieee1275/ofconsole.c (grub_ofconsole_checkkey): Return -1 if
there are no pending characters.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_get_devname): Use
`grub_strndup' to drop device arguments. Replace unnecessary
`grub_strndup' with `grub_strdup'.
From Timothy Baldwin:
* commands/ls.c (grub_ls_list_files): Close FILE with
grub_file_close.
* kern/misc.c (grub_vsprintf): Terminate the string S with NUL.
* include/grub/parser.h: New file.
* kern/parser.c: Likewise.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `kern/parser.c'.
(grub_setup_SOURCES): Likewise.
(grub_probefs_SOURCES): Likewise.
(grub_emu_SOURCES): Likewise.
(kernel_img_HEADERS): Add `parser.h'.
* conf/powerpc-ieee1275.rmk (grubof_HEADERS): Add `parser.h'.
(grub_emu_SOURCES): Add `kern/parser.c'.
(grubof_SOURCES): Likewise.
* conf/sparc64-ieee1275.rmk (grubof_HEADERS): Add `parser.h'.
(grubof_SOURCES): Add `kern/parser.c'.
* include/grub/misc.h (grub_split_cmdline): Removed prototype.
* kern/misc.c (grub_split_cmdline): Removed function.
* kern/rescue.c: Include <grub/parser.h>.
(grub_enter_rescue_mode): Use `grub_parser_split_cmdline' instead
of `grub_split_cmdline'.
* normal/command.c: Include <grub/parser.h>.
(grub_command_execute): Use `grub_parser_split_cmdline' instead
of `grub_split_cmdline'.
* normal/completion.c: Include <grub/parser.h>.
(cmdline_state): New variable.
(iterate_dir): End the filename with a quote depending on the
command line state.
(get_state): new function.
(grub_normal_do_completion): Use `grub_parser_split_cmdline' to
split the arguments and determine the current argument. When the
argument string is not quoted, escape all spaces.
* include/grub/sparc64/libgcc.h: New file.
* conf/sparc64-ieee1275.rmk (COMMON_ASFLAGS): Remove -Av9.
(normal_mod_SOURCES): Use normal/sparc64/setjmp.S instead of
normal/sparc64/setjmp.c.
* util/i386/pc/grub-probefs.c (main): Call grub_xfs_init and
grub_xfs_fini. Do not call grub_hfs_init or grub_hfs_fini any
longer, because HFS should not be used on PC.
* configure.ac (AC_INIT): Increase the version number to 1.91.
* DISTLIST: Added include/grub/terminfo.h, include/grub/tparm.h,
include/grub/i386/pc/serial.h, term/terminfo.c, term/tparm.c and
term/i386/pc/serial.c.
* kern/file.c (grub_file_seek): Seeking to an offset equal to a
file size must be permitted.
* kern/i386/pc/startup.S (multiboot_trampoline): Fix a mistake
between %ah and %al.
* fs/xfs.c (grub_xfs_iterate_dir): Change the type of BLK to
grub_uint64_t.
Call the hook with a NUL-terminated filename.
(grub_xfs_mount): Use grub_be_to_cpu32 instead of
grub_cpu_to_be32.
* kern/term.c (cursor_state): New variable.
(grub_term_set_current): Reset the cursor state on a new
terminal.
(grub_setcursor): Rewritten to use CURSOR_STATE.
(grub_getcursor): New function.
* include/grub/term.h (grub_getcursor): New prototype.
* io/gzio.c (test_header): Align BUF for accessing it as 32-bit
integers on ARM. Reported by Timothy Baldwin
<T.E.Baldwin99@members.leeds.ac.uk>.
* configure.ac: Accept `x86_64' as host_cpu. In that case add
`-m32' to CFLAGS.
* genmk.rb (class PModule): Always use `$(#{prefix}_LDFLAGS)' when
linking.
* conf/i386-pc.rmk (COMMON_CFLAGS): Add `-m32'.
(COMMON_LDFLAGS): New variable.
(kernel_img_LDFLAGS): Include `COMMON_FLAGS'.
(_chain_mod_LDFLAGS, fshelp_mod_LDFLAGS, fat_mod_LDFLAGS)
(ext2_mod_LDFLAGS, ufs_mod_LDFLAGS, minix_mod_LDFLAGS)
(hfs_mod_LDFLAGS, jfs_mod_LDFLAGS, iso9660_mod_LDFLAGS)
(xfs_mod_LDFLAGS, _linux_mod_LDFLAGS, linux_mod_LDFLAGS)
(normal_mod_LDFLAGS, hello_mod_LDFLAGS, boot_mod_LDFLAGS)
(terminal_mod_LDFLAGS, ls_mod_LDFLAGS, cmp_mod_LDFLAGS)
(cat_mod_LDFLAGS, help_mod_LDFLAGS, reboot_mod_LDFLAGS)
(halt_mod_LDFLAGS, vga_mod_LDFLAGS, font_mod_LDFLAGS)
(terminfo_mod_LDFLAGS, serial_mod_LDFLAGS, _multiboot_mod_LDFLAGS)
(multiboot_mod_LDFLAGS, amiga_mod_LDFLAGS, apple_mod_LDFLAGS)
(pc_mod_LDFLAGS, sun_mod_LDFLAGS, loopback_mod_LDFLAGS)
(default_mod_LDFLAGS, timeout_mod_LDFLAGS, configfile_mod_LDFLAGS)
(vbe_mod_LDFLAGS, vesafb_mod_LDFLAGS, vbeinfo_mod_LDFLAGS)
(vbetest_mod_LDFLAGS, search_mod_LDFLAGS, gzio_mod_LDFLAGS): New
variables.
(normal_mod_ASFLAGS): Add `-m32'.
* include/grub/types.h (grub_host_addr_t, grub_host_off_t)
(grub_host_size_t, grub_host_ssize_t): New types.
(grub_addr_t, grub_off_t, grub_size_t, grub_ssize_t): Make type
dependant of `GRUB_CPU_SIZEOF_VOID_P' instead on
`GRUB_HOST_SIZEOF_VOID_P'.
* include/grub/kernel.h (struct grub_module_header): Type of
member offset changed to `grub_host_off_t'. Type of member size
changed to `grub_host_size_t'.
(struct grub_module_info): Type of member offset changed to
`grub_host_off_t'. Type of member size changed to
`grub_host_size_t'.
Make GRUB's kernel compliant to Multiboot Specification.
* kern/i386/pc/startup.S (multiboot_header): New label.
(multiboot_entry): Likewise.
(multiboot_trampoline): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x4A0.
* fs/xfs.c (grub_xfs_iterate_dir): Fix a syntax error. You may not
put parentheses after a question mark.
[!GRUB_UTIL] (my_mod): New variable.
* util/grub-emu.c (main): Call grub_xfs_init and grub_xfs_fini.
* DISTLIST: Replaced boot/powerpc/ieee1275/crt0.S and
boot/powerpc/ieee1275/cmain.c with kern/powerpc/ieee1275/crt0.S
and kern/powerpc/ieee1275/cmain.c, respectively.
* boot/powerpc/ieee1275/crt0.S: Moved to ...
* kern/powerpc/ieee1275/crt0.S: ... here.
* boot/powerpc/ieee1275/cmain.c: Moved to ...
* kern/powerpc/ieee1275/cmain.c: ... here.
* conf/powerpc-ieee1275.rmk (grubof_SOURCES): Use
kern/powerpc/ieee1275/crt0.S and kern/powerpc/ieee1275/cmain.c
instead of boot/powerpc/ieee1275/crt0.S and
boot/powerpc/ieee1275/cmain.c, respectively.
* boot/i386/pc/boot.S (lba_mode): Do not store the total number of
sectors. It was not used anyway.
* include/grub/normal.h (enum grub_completion_type): Added
`GRUB_COMPLETION_TYPE_ARGUMENT'.
* normal/cmdline.c (print_completion): Handle
the `GRUB_COMPLETION_TYPE_ARGUMENT' type.
* normal/menu_entry.c (store_completion): Likewise.
* normal/completion.c (complete_arguments): New function.
(grub_normal_do_completion): Call `complete_arguments' when the
current words start with a dash.
* conf/sparc64-ieee1275.rmk (grubof_SOURCES): The first file must be
kern/sparc64/ieee1275/init.c because it contains _start.
* conf/sparc64-ieee1275.mk: Generated from conf/sparc64-ieee1275.rmk.
* configure.ac: Add support for sparc64 host with ieee1275
firmware.
* configure: Generated from configure.ac.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Use grub_ssize_t
instead of int.
(grub_ofdisk_read): Likewise.
(grub_ofdisk_open): Use %p to print pointer values, and cast the
pointers as (void *) to remove a warning.
(grub_ofdisk_close): Likewise.
(grub_ofdisk_read): Likewise.
* kern/ieee1275/ieee1275.c (grub_ieee1275_exit): This never
returns, so make it return void to remove a warning.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_exit):
Corresponding prototype change.
* kern/mm.c (grub_mm_init_region): Use %p to print pointer
values, and cast the pointers as (void *) to remove a warning.
(grub_mm_dump): Likewise.
* conf/sparc64-ieee1275.mk: New file.
* conf/sparc64-ieee1275.rmk: Likewise.
* include/grub/sparc64/setjmp.h: Likewise.
* include/grub/sparc64/types.h: Likewise.
* include/grub/sparc64/ieee1275/console.h: Likewise.
* include/grub/sparc64/ieee1275/ieee1275.h: Likewise.
* include/grub/sparc64/ieee1275/kernel.h: Likewise.
* include/grub/sparc64/ieee1275/time.h: Likewise.
* kern/sparc64/cache.c: Likewise.
* kern/sparc64/dl.c: Likewise.
* kern/sparc64/ieee1275/init.c: Likewise.
* kern/sparc64/ieee1275/openfw.c: Likewise.
* util/console.c (grub_ncurses_putchar): If C is greater than
0x7f, set C to a question mark.
(grub_ncurses_getcharwidth): New function.
(grub_ncurses_term): Specify grub_ncurses_getcharwidth as
getcharwidth.
* normal/menu.c (print_entry): Made aware of Unicode. First,
convert TITLE to UCS-4, and predict the cursor position by
grub_getcharwidth.
* include/grub/misc.h (grub_utf8_to_ucs4): Specify the qualifier
const to SRC.
* kern/misc.c (grub_utf16_to_utf8): Likewise.
* loader/powerpc/ieee1275/linux.c (grub_rescue_cmd_linux): Specify
the boot file by the option BOOT_IMAGE. Use grub_stpcpy instead of
grub_strcat.
* loader/i386/pc/linux.c (grub_rescue_cmd_linux): Specify the boot
file by the option BOOT_IMAGE. Use grub_stpcpy instead of
grub_strcpy and grub_strlen. Take it into account that a space
character is inserted as a delimiter.
* partmap/pc.c (pc_partition_map_iterate): Include the value of an
invalid magic in thre error.
* commands/search.c: New file.
* util/grub-emu.c (main): Call grub_search_init and
grub_search_fini.
* kern/rescue.c (grub_rescue_print_disks): Removed.
(grub_rescue_print_devices): New function.
(grub_rescue_cmd_ls): Use grub_device_iterate with
grub_rescue_print_devices instead of grub_disk_dev_iterate with
grub_rescue_print_disks.
* kern/partition.c (grub_partition_iterate): Return the result of
PARTMAP->ITERATE instead of GRUB_ERRNO.
* kern/device.c: Include grub/partition.h.
(grub_device_iterate): New function.
* include/grub/partition.h (grub_partition_iterate): Return int
instead of grub_err_t.
* include/grub/normal.h [GRUB_UTIL] (grub_search_init): New
prototype.
[GRUB_UTIL] (grub_search_fini): Likewise.
* include/grub/device.h (grub_device_iterate): New prototype.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Added
commands/search.c.
(pkgdata_MODULES): Added search.mod.
(search_mod_SOURCES): New variable.
(search_mod_CFLAGS): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added commands/search.c.
(pkgdata_MODULES): Added search.mod.
(search_mod_SOURCES): New variable.
(search_mod_CFLAGS): Likewise.
* commands/ls.c (grub_ls_list_disks): Renamed to ...
(grub_ls_list_devices): ... this, and use grub_device_iterate.
All callers changed.
* DISTLIST: Added commands/search.c.
* kern/term.c (grub_putchar): Use grub_utf8_to_ucs4 for the
conversion.
(grub_getcharwidth): New function.
* kern/misc.c (grub_utf8_to_ucs4): New function.
* include/grub/term.h (struct grub_term): Added a new member
"getcharwidth".
(grub_getcharwidth): New prototype.
* include/grub/misc.h (grub_utf8_to_ucs4): New prototype.
* term/i386/pc/console.c (map_char): New function. Segregated from
grub_console_putchar.
(grub_console_putchar): Use map_char.
(grub_console_getcharwidth): New function.
(grub_console_term): Specified grub_console_getcharwidth as
getcharwidth.
* term/i386/pc/vga.c (grub_vga_getcharwidth): New function.
(grub_vga_term): Specified grub_vga_getcharwidth as getcharwidth.
* term/i386/pc/vesafb.c (grub_virtual_screen_setup): Return
GRUB_ERRNO.
(grub_vesafb_init): Do not use RC. Instead, use GRUB_ERRNO. Rely
on grub_strtoul completely.
(write_char): Declare local variables in the beginning of the
function.
(grub_vesafb_getcharwidth): New function.
(grub_vesafb_term): Specified grub_vesafb_getcharwidth as
getcharwidth.
* DISTLIST: Replace commands/i386/pc/vbe_list_modes.c and
commands/i386/pc/vbe_test.c with commands/i386/pc/vbeinfo.c and
commands/i386/pc/vbetest.c.
* video/i386/pc/vbe.c (grub_vbe_probe): If INFOBLOCK is not NULL,
call grub_vbe_get_controller_info again, because the returned
information is volatile.
(grub_vbe_set_video_mode): Mostly rewritten.
(grub_vbe_get_video_mode): Use grub_vbe_probe and use
grub_vbe_status_t correctly.
(grub_vbe_get_video_mode_info): Likewise.
(grub_vbe_set_pixel_rgb): Use a switch statement rather than
several if statements.
* commands/i386/pc/vbe_list_modes.c: Renamed to ...
* commands/i386/pc/vbeinfo.c: ... this.
* commands/i386/pc/vbe_test.c: Renamed to ...
* commands/i386/pc/vbetest.c: ... this.
* commands/i386/pc/vbeinfo.c (grub_cmd_vbe_list_modes): Renamed to
...
(grub_cmd_vbeinfo): ... this. Save video modes before
iterating. Skip a video mode, if it is not available, not enough
information is given or it is monochrome. Show the memory
model. Leave the interpretation of MODEVAR to grub_strtoul
completely.
(GRUB_MOD_INIT): Rename vbe_list_modes to vbeinfo.
(GRUB_MOD_FINI): Likewise.
* commands/i386/pc/vbetest.c (grub_cmd_vbe_test): Renamed to ...
(grub_cmd_vbetest): ... this. Don't print unnecessarily. Use
grub_err_t instead of grub_uint32_t. Don't use SPTR. Remove a
duplicated grub_env_get. Leave the interpretation of MODEVAR to
grub_strtoul completely.
(real2pm): Removed.
(GRUB_MOD_INIT): Rename vbe_test to vbetest.
(GRUB_MOD_FINI): Likewise.
* normal/misc.c: Include grub/mm.h.
* conf/i386-pc.rmk (pkgdata_MODULES): Replaced vbe_test.mod and
vbe_list_modes with vbetest.mod and vbeinfo.mod.
(vbe_list_modes_mod_SOURCES): Removed.
(vbe_list_modes_mod_CFLAGS): Likewise.
(vbe_test_mod_SOURCES): Likewise.
(vbe_test_mod_CFLAGS): Likewise.
(vbeinfo_mod_SOURCES): New variable.
(vbeinfo_mod_CFLAGS): Likewise.
(vbetest_mod_SOURCES): Likewise.
(vbetest_mod_CFLAGS): Likewise.
* normal/misc.c: New file.
* DISTLIST: Added normal/misc.c.
* partmap/amiga.c (amiga_partition_map_iterate): Add an argument
DISK to HOOK. Call HOOK with DISK.
* partmap/apple.c (apple_partition_map_iterate): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* partmap/sun.c (sun_partition_map_iterate): Likewise.
* normal/menu_entry.c (struct screen): Added a new member
"completion_shown".
(completion_buffer): New global variable.
(make_screen): Set SCREEN->COMPLETION_SHOWN to zero.
(store_completion): New function.
(complete): Likewise.
(clear_completions): Likewise.
(grub_menu_entry_run): If SCREEN->COMPLETION_SHOWN is non-zero,
call clear_completions and reset SCREEN->COMPLETION_SHOWN. If C is
a tab, call complete.
* normal/completion.c (disk_dev): Removed.
(print_simple_completion): Likewise.
(print_partition_completion): Likewise.
(print_func): New global variable.
(add_completion): Do not take the arguments WHAT or PRINT any
longer. Added a new argument TYPE. Instead of printing directly,
call PRINT_FUNC if not NULL.
All callers changed.
(complete_device): Use a local variable DEV instead of
DISK_DEV. Do not move CURRENT_WORD to the end of a device name.
(grub_normal_do_completion): Take a new argument HOOK. Do not
initialize DISK_DEV. Initialize PRINT_FUNC to HOOK. If RET is an
empty string, return NULL instead.
All callers changed.
* normal/cmdline.c (print_completion): New function.
* kern/partition.c (grub_partition_iterate): Add an argument DISK
to HOOK.
All callers changed.
* kern/disk.c (grub_print_partinfo): Removed.
* include/grub/partition.h (struct grub_partition_map): Add a new
argument DISK into HOOK of ITERATE.
(grub_partition_iterate): Add a new argument DISK to HOOK.
* include/grub/normal.h (enum grub_completion_type): New enum.
(grub_completion_type_t): New type.
(GRUB_COMPLETION_TYPE_COMMAND): New constant.
(GRUB_COMPLETION_TYPE_DEVICE): Likewise.
(GRUB_COMPLETION_TYPE_PARTITION): Likewise.
(GRUB_COMPLETION_TYPE_FILE): Likewise.
(grub_normal_do_completion): Added a new argument HOOK.
(grub_normal_print_device_info): New prototype.
* include/grub/disk.h (grub_print_partinfo): Removed.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added normal/misc.c.
(normal_mod_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
(normal_mod_SOURCES): Likewise.
* commands/ls.c (grub_ls_list_disks): Use
grub_normal_print_device_info instead of grub_print_partinfo. Free
PNAME.
(grub_ls_list_files): Use grub_normal_print_device_info instead of
duplicating the code.
* normal/menu.c (run_menu_entry):
* normal/command.c (grub_command_execute): If INTERACTIVE is
false and GRUB_COMMAND_FLAG_NO_ECHO is not specified, print
CMDLINE. Disable the pager if INTERACTIVE is true.
All callers are changed.
* normal/main.c (grub_normal_execute): Read command.lst and fs.lst
before reading a config file.
* normal/main.c (read_config_file): Even if a command is not
found, register it if it is within an entry.
* util/grub-emu.c: Include sys/types.h and unistd.h.
(options): Added --hold.
(struct arguments): Added a new member "hold".
(parse_opt): If KEY is 'H', set ARGS->HOLD to ARG or -1 if ARG is
missing.
(main): Initialize ARGS.HOLD to zero. Wait until ARGS.HOLD is
cleared by a debugger, if it is not zero.
* include/grub/normal.h (grub_command_execute): Add an argument
INTERACTIVE.
* aclocal.m4 (grub_I386_CHECK_REGPARM_BUG): Replace the test
program with another one, because the old one didn't detect a bug
in gcc-3.4. Always use regparm 2, because the new test is still
not enough for gcc-4.0. Someone must investigate a simple test
case which detects a bug in gcc-4.0.
* DISTLIST: Added normal/completion.c.
* normal/completion.c: New file.
* term/i386/pc/console.c (grub_console_getwh): New function.
(grub_console_term): Assign grub_console_getwh to getwh.
* normal/cmdline.c (grub_tab_complete): Removed. Now the same
function is defined in normal/completion.c as
grub_normal_do_completion.
(grub_cmdline_get): Use grub_normal_do_completion instead of
grub_tab_complete.
* kern/partition.c (grub_partition_map_iterate): Return 1 if HOOK
returns non-zero, otherwise return 0.
(grub_partition_iterate): First, probe the partition map. Then,
call ITERATE only for this partition map.
* kern/misc.c (grub_strncmp): Rewritten.
* kern/disk.c (grub_disk_dev_iterate): Return 1 if P->ITERATE
returns non-zero. Otherwise return 0.
* include/grub/partition.h (grub_partition_map_iterate): Return
int instead of void.
* include/grub/normal.h (grub_normal_do_completion): New prototype.
* include/grub/misc.h (grub_strncmp): Change the type of N to
grub_size_t.
* include/grub/disk.h (grub_disk_dev_iterate): Return int instead
of void.
* normal/menu.c (draw_border): Cast GRUB_TERM_BORDER_WIDTH to
unsigned explictly before comparing it with I.
* kern/main.c (grub_env_write_root): Add the attribute unused into
VAR.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Added
normal/completion.c.
(normal_mod_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Likewise.
(normal_mod_SOURCES): Likewise.
* normal/command.c (grub_iterate_commands): If ITERATE returns
non-zero, return one immediately.
* term/ieee1275/ofconsole.c: Include <grub/mm.h>.
(grub_ofconsole_getwh): Cast -1 to type grub_ieee1275_ihandle_t.
Pass 0 as `end' parameter to grub_strtoul().
* Makefile.in (LIBLZO): New variable.
* configure.ac: Check for LZO version 2.
* util/i386/pc/grub-mkimage.c [HAVE_LZO_LZO1X_H]: Include
lzo/lzo1x.h instead of lzo1x.h.
* conf/i386-pc.rmk (grub_mkimage_LDFLAGS): Use $(LIBLZO) instead
of -llzo.
* util/i386/pc/grub-setup.c (main): Do not free PREFIX
twice. Reported by Vladimir Serbinenko <phcoder@gmail.com>.
* partmap/pc.c (pc_partition_map_probe): Restore P->DATA after
copying the data from PARTITION to P.
* kern/rescue.c (grub_rescue_cmd_rmmod): If the reference count is
negative, unload the module.
* util/i386/pc/grub-setup.c (setup): The name of the PC partition
map is "pc_partition_map" but not "pc".
(usage): Fix the description. The options are --boot-image and
--core-image but not --boot-file or --core-file.
(main): If not specified explicitly, make BOOT_FILE and CORE_FILE
based on DEFAULT_BOOT_FILE and DEFAULT_CORE_FILE with DIR or
DEFAULT_DIRECTORY.
* util/i386/pc/grub-install.in: Do not specify --boot-file or
--core-file. Specify INSTALL_DEVICE as an argument.
* util/console.c: Include config.h.
[HAVE_NCURSeS_CURSES_H]: Include ncurses/curses.h.
[HAVE_NCURSES_H]: Include ncurses.h.
[HAVE_CURSES_H]: Include curses.h.
[!A_NORMAL] (A_NORMAL): Defined as zero.
[!A_STANDOUT] (A_STANDOUT): Likewise.
* conf/i386-pc.rmk (grub_emu_LDFLAGS): Use $(LIBCURSES) instead of
-lncurses.
* conf/powerpc-ieee1275.rmk (grub_emu_LDFLAGS): Likewise.
* configure.ac: Check for curses libraries and headers.
* Makefile.in (LIBCURSES): New variable.
* genmk.rb (Script::rule): Set the executable bits.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_get_grub_dev): The
name of the PC partition map is "pc_partition_map" but not "pc".
* util/i386/pc/grub-install.in (grub_probefs): New variable.
(modules): Likewise.
(usage): Added descriptions for --modules and --grub-probefs.
Handle --modules and --grub-probefs. Save the arguments in MODULES
and GRUB_PROBEFS, respectively.
Auto-detect a filesystem module against GRUBDIR. If the result is
empty and modules are not specified explicitly, abort the
installation. Add the result to MODULES.
* DISTLIST: Removed boot/powerpc/ieee1275/ieee1275.c,
disk/powerpc/ieee1275/ofdisk.c,
include/grub/powerpc/ieee1275/init.h and
term/powerpc/ieee1275/ofconsole.c.
Added disk/ieee1275/ofdisk.c, kern/ieee1275/of.c and
term/ieee1275/ofconsole.c.
* include/grub/powerpc/ieee1275/console.h: Resurrected.
* COPYING: Upgraded to the latest version. Only the address of the
FSF office has changed.
* conf/i386-pc.rmk (kernel_img_HEADERS): Reordered for
readablity.
* config.guess: Updated to the latest version from gnulib.
* config.sub: Likewise.
* install.sh: Likewise.
* mkinstalldirs: Likewise.
* include/grub/console.h: Removed. This file is arch-specific. Do
not put this in include/grub.
* include/grub/i386/pc/console.h: Resurrected.
* util/console.c: Include grub/machine/console.h instead of
grub/console.h.
* util/grub-emu.c: Likewise.
* kern/term.c (grub_putcode): Use `grub_getwh' instead of
hardcoded value.
From Vincent Pelletier <subdino2004@yahoo.fr>
* include/grub/term.h (GRUB_TERM_WIDTH, GRUB_TERM_HEIGHT):
Redefined to use grub_getwh.
(grub_term): New member named getwh.
(grub_getwh): New prototype.
* kern/term.c (grub_getwh): New function.
* term/i386/pc/console.c (grub_console_getwh): New function.
(grub_console_term): New member `getwh'.
* term/i386/pc/vga.c (grub_vga_getwh): New function.
(grub_vga_term): New member `getwh'.
* term/sparc64/ofconsole.c (grub_ofconsole_readkey): Use
grub_ssize_t.
(grub_ofconsole_getw): New function.
(grub_ofconsole_init): Use grub_ssize_t and unsigned char.
(grub_ofconsole_term): New field named getwh and new initial
value.
* include/grub/powerpc/ieee1275/ieee1275.h: Move ...
* include/grub/ieee1275/ieee1275.h: ... to here. All users updated.
Move `abort', `grub_reboot', and `grub_halt' prototypes ...
* include/grub/powerpc/ieee1275/kernel.h: ... to here.
* commands/ieee1275/halt.c: Include <grub/machine/kernel.h> instead
of <grub/machine/ieee1275.h>.
* commands/ieee1275/reboot.c: Likewise.
* boot/powerpc/ieee1275/ieee1275.c: Move ...
* kern/ieee1275.c: ... to here. All users updated. Change all
parameter structs to use new type `grub_ieee1275_cell_t'.
* term/powerpc/ieee1275/ofconsole.c: Move ...
* term/ieee1275/ofconsole.c: ... to here. All users updated.
* disk/powerpc/ieee1275/ofdisk.c: Move ...
* disk/ieee1275/ofdisk.c: ... to here. All users updated.
* boot/powerpc/ieee1275/cmain.c: Change `grub_ieee1275_entry_fn' type
to return int.
* include/grub/i386/pc/console.h: Move to include/grub/console.h.
Remove unused prototypes. All users updated.
* include/grub/powerpc/ieee1275/console.h: Removed.
* include/grub/powerpc/ieee1275/ieee1275.h: Define
`grub_ieee1275_cell_t'.
* kern/powerpc/ieee1275/openfw.c: Include <grub/machine/kernel.h>.
Cast comparisons with -1 to the correct type.
* loader/powerpc/ieee1275/linux.c (kernel_entry_t): Change parameter
type to match `grub_ieee1275_entry_fn'.
* loader/i386/pc/multiboot.c (grub_multiboot_is_elf32): New
function.
(grub_multiboot_load_elf32): Likewise.
(grub_multiboot_is_elf64): Likewise.
(grub_multiboot_load_elf64): Likewise.
(grub_multiboot_load_elf): Likewise.
(grub_rescue_cmd_multiboot): Call grub_multiboot_load_elf to load
an ELF32 or ELF64 file.
This is based on a patch from Ruslan Nikolaev <nruslan@mail.com>.
From Serbinenko Vladimir <serbinenko.vova@list.ru>:
* kern/disk.c (grub_print_partinfo): Check if FS->LABEL is not
NULL before calling FS->LABEL.
* fs/fat.c (grub_fat_dir): Initialize DIRNAME to NULL.
* commands/ls.c (grub_ls_list_files): Show labels, if possible.
(grub_ls_list_disks): Check if FS and FS->LABEL are not NULL
before calling FS->LABEL.
Change the semantics of variable hooks. They now return strings
instead of error values.
* util/i386/pc/grub-setup.c: Include grub/env.h.
(setup): Use grub_device_set_root instead of grub_env_set.
* kern/rescue.c (grub_rescue_cmd_root): Use grub_env_set and
grub_env_get instead of grub_device_set_root and
grub_device_get_root, respectively.
* kern/main.c (grub_env_write_root): New function.
(grub_set_root_dev): Register grub_env_write_hook for "root". Use
grub_env_set instead of grub_device_set_root.
* kern/env.c (HASHSZ): Reduced to 13, because GRUB does not need
many variables.
(grub_env_set): Set ENV->VALUE to the result of ENV->WRITE_HOOK
rather than calling ENV->WRITE_HOOK afterwards.
(grub_env_get): Return the result of ENV->READ_HOOK rather than
passing a pointer of a pointer.
(grub_register_variable_hook): Change the types of "read_hook" and
"write_hook" to grub_env_read_hook_t and grub_env_write_hook_t,
respectively.
Allocate the default empty string on the heap, because this string
may be freed later.
* kern/device.c: Include grub/env.h.
(grub_device_set_root): Removed.
(grub_device_get_root): Likewise.
(grub_device_open): Use grub_env_get instead of
grub_device_get_root.
* include/grub/env.h (grub_env_read_hook_t): New type.
(grub_env_write_hook_t): Likewise.
(grub_env_var): Change the types of "read_hook" and "write_hook"
to grub_env_read_hook_t and grub_env_write_hook_t, respectively.
(grub_register_variable_hook): Likewise.
* include/grub/device.h (grub_device_set_root): Removed.
(grub_device_set_root): Likewise.
* fs/fat.c (grub_fat_dir): Make a copy of PATH in DIRNAME, and
make sure that DIRNAME terminates with '/', so that
grub_fat_find_dir will fail if PATH is not a directory.
* commands/ls.c (grub_ls_list_files): Remove the qualifier const
from DIRNAME.
Use the qualifier auto for print_files and print_files_long.
If FS->DIR sets GRUB_ERRNO to GRUB_ERR_BAD_FILE_TYPE, try DIRNAME
as a regular file.
Put a newline only if there is no error.
(grub_cmd_ls): Remove grub_ls_print_files, because this is not
used.
* commands/ls.c (grub_ls_list_disks): Print the filesystem
information on each device, if it does not have partitions. Print
"Device" instead of "Disk", because this function is not specific
to disk devices.
* normal/main.c (grub_rescue_cmd_normal): Make the variable CONFIG
static to ensure that it is put on the memory rather than a
register.
* commands/cat.c (GRUB_MOD_INIT): Use better documentation.
(grub_cat_init): Likewise.
* loader/i386/pc/chainloader_normal.c (GRUB_MOD_INIT): Likewise.
(options): Likewise.
* commands/configfile.c (GRUB_MOD_INIT): Likewise.
(grub_configfile_init): Likewise.
* font/manager.c (GRUB_MOD_INIT): Likewise.
* commands/help.c (GRUB_MOD_INIT): Likewise.
(grub_help_init): Likewise.
* normal/command.c (grub_command_init): Likewise.
* loader/i386/pc/linux_normal.c (GRUB_MOD_INIT): Likewise.
* disk/loopback.c (grub_loop_init): Likewise.
(GRUB_MOD_INIT): Likewise.
* commands/ls.c (grub_ls_init): Likewise.
(GRUB_MOD_INIT): Likewise.
(options): Likewise.
* commands/boot.c (grub_boot_init): Likewise.
(GRUB_MOD_INIT): Likewise.
* loader/i386/pc/multiboot_normal.c (GRUB_MOD_INIT): Likewise.
* commands/i386/pc/reboot.c (grub_reboot_init): Likewise.
(GRUB_MOD_INIT): Likewise.
* commands/cmp.c (grub_cmp_init): Likewise.
(GRUB_MOD_INIT): Likewise.
* normal/arg.c: Use <> instead of "" to include header files.
(SHORT_ARG_HELP): New macro.
(SHORT_ARG_USAGE): Likewise.
(help_options): Specify SHORT_ARG_HELP and SHORT_ARG_USAGE instead
of 'h' and 'u' for help and usage, respectively. Use more GNU-like
descriptions.
(find_short): Check if C is 'h' or 'u' explicitly.
(grub_arg_show_help): Use space characters instead of tabs. Treat
SHORT_ARG_HELP and SHORT_ARG_USAGE exceptionally so that -h and -u
are shown with --help and --usage only if they are not used for
the command itself.
(parse_option): Use SHORT_ARG_HELP and SHORT_ARG_USAGE instead of
'h' and 'u'.
* include/grub/arg.h (struct grub_arg_option): Add the qualifier
const into "longarg". Change the type of "shortarg" to int.
* boot/i386/pc/boot.S (boot_drive_check): New label.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_DRIVE_CHECK): New
macro.
* util/i386/pc/grub-setup.c (setup): Added a workaround for BIOSes
which do not pass a boot drive correctly. Copied from GRUB Legacy.
* kern/i386/pc/startup.S (gate_a20_try_system_control_port_a):
When turning off Gate A20, skip the check and return immediately,
because this is not fatal usually.
* conf/i386-pc.rmk (pxeboot_img_LDFLAGS): The text address should
be 0x7C00 instead of 0x8000.
* boot/i386/pc/pxeboot.S: Rewritten.
* kern/i386/pc/startup.S (gate_a20_try_bios): No need to specify
EXT_C.
(gate_a20_check_state): Read a byte from 0x108000. Invert the
result.
* kern/i386/pc/startup.S (grub_gate_a20): Rewritten for
robustness. This routine now supports a BIOS call and System
Control Port A to modify the gate A20.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Increased to 0x440.
* disk/powerpc/ieee1275/ofdisk.c (grub_ofdisk_open): dprintf the
device path and resulting ihandle.
(grub_ofdisk_close): dprintf the ihandle being closed.
(grub_ofdisk_read): dprintf function parameters.
* kern/mm.c (grub_mm_init_region): Likewise.
* loader/powerpc/ieee1275/linux.c: Remove extra whitespace.
(grub_linux_boot): dprintf the Linux entry point, initrd address and
size, and boot arguments.
(grub_rescue_cmd_linux): dprintf each ELF segment's address and size
before loading into memory.
(grub_rescue_cmd_initrd): dprintf the initrd's address and size
before loading into memory.
* commands/cmp.c (BUFFER_SIZE): New macro.
(grub_cmd_cmp): Close the right file at the right time. Compare
only data just read. Don't report files of different size as
identical. Dynamically allocate buffers. Move variable
declarations at the beginning of function.
* DISTLIST: Added genfslist.sh.
* normal/main.c (fs_module_list): New variable.
(autoload_fs_module): New function.
(read_fs_list): Likewise.
(grub_normal_execute): Call read_fs_list.
* kern/fs.c (grub_fs_autoload_hook): New variable.
(grub_fs_probe): Added support for auto-loading.
* include/grub/normal.h (struct grub_fs_module_list): New struct.
(grub_fs_module_list_t): New type.
* include/grub/fs.h (grub_fs_autoload_hook_t): New type.
(grub_fs_autoload_hook): New prototype.
* genfslist.sh: New file.
* genmk.rb: Added a rule to generate a filesystem list.
* configure.ac: Fix the test for cross-compiling.
* genmk.rb (Program): Use `$(CC)' instead of `$(BUILD_CC)'. Don't
define GRUB_UTIL anymore.
* util/powerpc/ieee1275/grub-mkimage.c (load_note): Endian fixes
so this function works on other systems than just big endian.
(load_modules): Likewise.
(add_segments): Likewise.
* kern/mm.c (grub_free): If the next free block which is being
merged is the first free block, set the first block to the block
being freed.
Reported by Vincent Guffens <guffens@inma.ucl.ac.be>.
* boot/powerpc/ieee1275/cmain.c (module_info): Remove definition.
(grub_ieee1275_chosen): New variable.
(cmain): Initialize and use `grub_ieee1275_chosen' instead of
`chosen'.
* boot/powerpc/ieee1275/crt0.S (init_stack): Remove stack space.
* boot/powerpc/ieee1275/ieee1275.c (grub_ieee1275_get_property):
Rename first argument to `phandle' for consistency.
(grub_ieee1275_get_property_length): Likewise.
(grub_ieee1275_next_property): Likewise. Change type of first argument
to grub_ieee1275_phandle_t.
* include/grub/powerpc/ieee1275/ieee1275.h (grub_ieee1275_entry_fn):
Move export next to declaration.
(grub_ieee1275_chosen): New variable.
* include/grub/powerpc/ieee1275/kernel.h (GRUB_IEEE1275_MODULE_BASE):
Correct cosmetic typo.
* kern/powerpc/ieee1275/init.c (grub_set_prefix): Use
`grub_ieee1275_chosen'.
* kern/powerpc/ieee1275/openfw.c (grub_map): Likewise.
* loader/powerpc/ieee1275/linux.c (grub_linux_boot): Likewise.
(grub_rescue_cmd_linux): Set `initrd_addr' to 0.
* term/powerpc/ieee1275/ofconsole.c (grub_ofconsole_refresh): Use
`grub_ieee1275_chosen'.
* DISTLIST: New file.
* gendistlist.sh: Likewise.
* Makefile.in (COMMON_DISTFILES): Removed.
(BOOT_DISTFILES): Likewise.
(CONF_DISTFILES): Likewise.
(DISK_DISTFILES): Likewise.
(FS_DISTFILES): Likewise.
(INCLUDE_DISTFILES): Likewise.
(KERN_DISTFILES): Likewise.
(LOADER_DISTFILES): Likewise.
(TERM_DISTFILES): Likewise.
(UTIL_DISTFILES): Likewise.
(DISTFILES): Likewise.
(uninstall): Uninstall files in $(pkgdata_DATA).
(DISTLIST): New target.
(distdir): Use the contents of the file DISTLIST to get a list of
distributed files.
* fs/fat.c (grub_fat_mount): Ignore the 3rd bit of a media
descriptor. This is ported from GRUB Legacy.
* gencmdlist.sh: Added an extra semicolon to make it work with
old sed versions. Reported by Robert Bihlmeyer
<robbe@orcus.priv.at>.
Automatic loading of commands is supported.
* normal/main.c (read_command_list): New function.
(grub_normal_execute): Call read_command_list.
* normal/command.c (grub_register_command): Return zero or CMD.
Allocate CMD->NAME from the heap.
Initialize CMD->MODULE_NAME to zero.
Find the same name as well. If the same command is found and it is
a dummy command, overwrite members. If it is not a dummy command,
return zero.
(grub_unregister_command): Free Q->NAME and Q->MODULE_NAME.
(grub_command_find): If a dummy command is found, load a module
and retry to find a command only once.
* normal/cmdline.c (grub_tab_complete): Call grub_command_find to
make sure that each command is loaded.
* include/grub/normal.h (GRUB_COMMAND_FLAG_NOT_LOADED): New
macro.
(struct grub_command): Remove const from the member `name'.
Add a new member `module_name'.
(grub_register_command): Return grub_command_t.
* commands/help.c (grub_cmd_help): Call grub_command_find to make
sure that each command is loaded.
* genmk.rb (PModule::rule): Specify a module name without the
suffix ".mod" to gencmdlist.sh.
* normal/arg.c (grub_arg_show_help): Do not show the bug report
address.
* commands/help.c (grub_cmd_help): Do not print newlines after
the last command in print_command_help.
* commands/default.h: New file.
* commands/timeout.h: Likewise.
* normal/context.c: Likewise.
* util/misc.c: Do not include sys/times.h.
Include sys/time.h and grub/machine/time.h.
(grub_get_rtc): Rewritten with gettimeofday.
* util/grub-emu.c (main): Call grub_default_init and
grub_timeout_init before grub_normal_init, and call
grub_timeout_fini and grub_default_fini after grub_main.
* util/console.c (grub_ncurses_checkkey): Return the read
character or -1.
* normal/menu.c (run_menu): Set MENU->TIMEOUT to -1 once it
timeouts.
* normal/main.c (read_config_file): Push MENU. If this fails,
print an error and wait for a user input.
Print an error only if GRUB_ERRNO is not GRUB_ERR_NONE.
If a menu is empty or an error occurs, pop MENU.
(grub_normal_execute): Pop and free MENU after grub_menu_run
returns.
* kern/loader.c (grub_loader_boot): Call grub_machine_fini.
* include/grub/powerpc/ieee1275/time.h [GRUB_UTIL]: Do not
include time.h.
[GRUB_UTIL] (GRUB_TICKS_PER_SECOND): Use the same definition as
without GRUB_UTIL.
* include/grub/i386/pc/time.h [GRUB_UTIL]: Do not include
time.h.
[GRUB_UTIL] (GRUB_TICKS_PER_SECOND): Use the same definition as
without GRUB_UTIL.
* include/grub/normal.h (struct grub_menu_list): New struct.
(grub_menu_list_t): New type.
(struct grub_context): New struct.
(grub_context_t): New type.
(grub_register_command): Got rid of EXPORT_FUNC.
(grub_unregister_command): Likewise.
(grub_context_get): New prototype.
(grub_context_get_current_menu): Likewise.
(grub_context_push_menu): Likewise.
(grub_context_pop_menu): Likewise.
[GRUB_UTIL] (grub_default_init): Likewise.
[GRUB_UTIL] (grub_default_fini): Likewise.
[GRUB_UTIL] (grub_timeout_init): Likewise.
[GRUB_UTIL] (grub_timeout_fini): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added commands/default.c,
commands/timeout.c and normal/context.c.
(pkgdata_MODULES): Added default.mod and timeout.mod.
(normal_mod_SOURCES): Added normal/context.c.
(default_mod_SOURCES): New variable.
(default_mod_CFLAGS): Likewise.
(timeout_mod_SOURCES): Likewise.
(timeout_mod_CFLAGS): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Copied from
conf/i386-pc.rmk.
(pkgdata_MODULES): Added default.mod and timeout.mod.
(normal_mod_SOURCES): Added normal/context.c.
(default_mod_SOURCES): New variable.
(default_mod_CFLAGS): Likewise.
(timeout_mod_SOURCES): Likewise.
(timeout_mod_CFLAGS): Likewise.
* Makefile.in (all-local): Added $(MKFILES).
* include/grub/normal.h (grub_halt_init): New prototype.
(grub_halt_fini): Likewise.
(grub_reboot_init): Likewise.
(grub_reboot_fini): Likewise.
* util/grub-emu.c: Include signal.h.
(main_env): New global variable.
(grub_machine_init): Ignore SIGINT. Otherwise grub-emu cannot
catch C-c.
(grub_machine_fini): New function.
(main): Call grub_halt_init and grub_reboot_init before
grub_main, and grub_reboot_fini and grub_halt_fini after it.
Call setjmp with MAIN_ENV to go back afterwards.
Call grub_machine_fini right before return.
* include/grub/util/misc.h: Include setjmp.h.
(main_env): New prototype.
* include/grub/kernel.h (grub_machine_fini): New prototype.
* include/grub/i386/pc/biosdisk.h (grub_biosdisk_fini): Likewise.
* include/grub/i386/pc/console.h (grub_console_fini): Likewise.
* disk/i386/pc/biosdisk.c (grub_biosdisk_fini): New function.
* kern/i386/pc/init.c (grub_machine_fini): Likewise.
* term/i386/pc/console.c (grub_console_fini): Likewise.
* util/i386/pc/misc.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
util/i386/pc/misc.c, commands/i386/pc/halt.c and
commands/i386/pc/reboot.c.
* include/grub/dl.h (grub_dl_check_header): New prototype.
(grub_arch_dl_check_header): Change return type to grub_err_t,
remove size parameter and export function. Update all callers.
* kern/dl.c (grub_dl_check_header): New function.
(grub_dl_load_core): Use `grub_dl_check_header' instead of
`grub_arch_dl_check_header'. Check ELF type. Check if sections
are inside the core.
* kern/i386/dl.c (grub_arch_dl_check_header): Remove arch
independent ELF header checks.
* kern/powerpc/dl.c (grub_arch_dl_check_header): Likewise.
* loader/i386/pc/multiboot.c (grub_rescue_cmd_multiboot): Use
`grub_dl_check_header' instead of explicit checks. Check for the
ELF type.
* loader/powerpc/ieee1275/linux.c (grub_rescue_cmd_linux): Use
`grub_dl_check_header' instead of explicit checks. Remove arch
specific ELF header checks.
* kern/partition.c (grub_partition_probe): Clear `grub_errno' and
return 0 if `grub_errno' is GRUB_ERR_BAD_PART_TABLE.
(part_map_iterate): Clear `grub_errno' and return 0 if
`partmap->iterate' returns GRUB_ERR_BAD_PART_TABLE.
* partmap/amiga.c (amiga_partition_map_iterate): Return
GRUB_ERR_BAD_PART_TABLE if no partition map magic is found.
* partmap/apple.c (apple_partition_map_iterate): Likewise.
* include/grub/powerpc/ieee1275/loader.h (grub_load_linux):
Removed prototype.
(grub_rescue_cmd_linux): New prototype.
(grub_rescue_cmd_initrd): Likewise.
* powerpc/ieee1275/linux.c (grub_linux_boot): Remove struct
`bi_rec'.
(grub_linux_release_mem): Release the memory for the initrd.
(grub_load_linux): Renamed from this...
(grub_rescue_cmd_linux): ...To this. Changed all callers.
Changed `entry' not to be static. Loop over memory regions to
find another one when the default fails.
(grub_rescue_cmd_initrd): New function.
(grub_linux_init): Remove function.
(grub_linux_fini): Likewise.
(GRUB_MOD_INIT): Register `initrd'.
(GRUB_MOD_FINI): Unregister `initrd'.
* powerpc/ieee1275/linux_normal.c (grub_linux_normal_init):
Function removed.
(grub_linux_normal_fini): Likewise.
(GRUB_MOD_INIT): Register `initrd'.
(GRUB_MOD_FINI): Unregister `initrd'.
* normal/menu.c (TERM_WIDTH): Macro redefined.
(TERM_TOP_BORDER_Y): Likewise.
(draw_border): Replaced while-loop by a for-loop. Make the number
of lines consistent with the number of lines displayed in
print_entries. Added a margin below the rectangle.
(print_entry): Make the entry fit in the rectangle.
(print_entries): Display the scroll arrows next to the right
border.
* fs/minix.c (grub_minix_find_file): Reserve more space for
`fpath' so the \0 can be stored. Use `grub_strcpy' instead of
`grub_strncpy' to copy `path' into it.
Add the loopback device, a device via which files can be accessed
as devices.
* conf/i386-pc.rmk (grub_emu_SOURCES): Add `disk/loopback.c'.
(pkgdata_MODULES): Add loopback.mod.
(loopback_mod_SOURCES): New variable.
(loopback_mod_CFLAGS): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add
`disk/loopback.c'.
(pkgdata_MODULES): Add loopback.mod.
(loopback_mod_SOURCES): New variable.
(loopback_mod_CFLAGS): Likewise.
* disk/loopback.c: new file.
* include/grub/normal.h (grub_loop_init): New prototype.
(grub_loop_fini): New prototype.
* util/grub-emu.c (main): Initialize and de-initialize loopback
support.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_LOOPBACK_ID'.
* include/grub/mm.h (grub_mm_init_region): Change the type of the
`unsigned' arguments to `grub_size_t'.
(grub_malloc): Likewise.
(grub_realloc): Likewise.
(grub_memalign): Likewise.
* kern/i386/dl.c (grub_arch_dl_check_header): Likewise.
* kern/powerpc/dl.c (grub_arch_dl_check_header): Likewise.
* util/misc.c (grub_malloc): Likewise.
(grub_realloc): Likewise.
* kern/mm.c (get_header_from_pointer): Change the casts to
`unsigned' into a cast to `grub_size_t'.
* fs/fshelp.c (grub_fshelp_find_file): The `oldnode' should always
point to `currnode' when `currnode' is changed.
* util/grub-emu.c (main): Initialize `progname'. Reported by Nico
Schottelius <nico-linux@schottelius.org>.
* util/powerpc/ieee1275/grub-mkimage.c: Include <string.h>.
(note_path): Remove variable.
(GRUB_IEEE1275_NOTE_NAME): New macro.
(GRUB_IEEE1275_NOTE_TYPE): Likewise.
(grub_ieee1275_note_hdr): New structure.
(grub_ieee1275_note_desc): Likewise.
(grub_ieee1275_note): Likewise.
(load_note): Remove `dir' argument. All callers updated. Remove
`note_img' and `path'. Do not load a file from `note_path'.
Initialize a struct grub_ieee1275_note and write that to `out'.
Use GRUB_IEEE1275_MODULE_BASE instead of MODULE_BASE.
* boot/powerpc/ieee1275/cmain.c (grub_ieee1275_realmode): New
variable.
(find_options): New function.
(cmain): Call find_options.
* include/grub/powerpc/ieee1275/ieee1275.h
(grub_ieee1275_realmode): New extern variable.
* kern/powerpc/ieee1275/openfw.c (grub_claimmap): Only call
grub_map if grub_ieee1275_realmode is false.
* normal/cmdline.c (grub_cmdline_get): Redone logic so no empty
lines are inserted and make it work like readline. Reported by
Vincent Pelletier <subdino2004@yahoo.fr>.
* genmk.rb: Handle the `Program' class in the main loop. Written
by Johan Rydberg <jrydberg@gnu.org>.
(Program): New class.
(programs): New variable.
* boot/powerpc/ieee1275/cmain.c: Include <grub/machine/ieee1275.h>
instead of "grub/machine/ieee1275.h". Include <grub/kernel.h>
instead of "grub/kernel.h". Include <grub/machine/init.h>.
(help_arch): Function removed.
* conf/powerpc-ieee1275.rmk (grubof_HEADERS): Add
`powerpc/libgcc.h' and `loader.h'.
(pkgdata_PROGRAMS): New variable.
(sbin_UTILITIES): Variable removed.
(grub_emu_SOURCES): Added kern/powerpc/cache.S.
(grubof_SOURCES): Variable re-defined so it only includes the
core functionality.
(grubof_CFLAGS): Remove `-DGRUBOF'.
(pkgdata_MODULES, fshelp_mod_SOURCES, fshelp_mod_CFLAGS,
(fat_mod_SOURCES, fat_mod_CFLAGS, ext2_mod_SOURCES)
(ext2_mod_CFLAGS, ufs_mod_SOURCES, ufs_mod_CFLAGS)
(minix_mod_SOURCES, minix_mod_CFLAGS, hfs_mod_SOURCES)
(hfs_mod_CFLAGS, jfs_mod_SOURCES, jfs_mod_CFLAGS)
(iso9660_mod_SOURCES, iso9660_mod_CFLAGS, _linux_mod_SOURCES)
(_linux_mod_CFLAGS, linux_mod_SOURCES, linux_mod_CFLAGS)
(normal_mod_SOURCES, normal_mod_CFLAGS, normal_mod_ASFLAGS)
(hello_mod_SOURCES, hello_mod_CFLAGS, boot_mod_SOURCES)
(boot_mod_CFLAGS, terminal_mod_SOURCES, terminal_mod_CFLAGS)
(ls_mod_SOURCES, ls_mod_CFLAGS, cmp_mod_SOURCES, cmp_mod_CFLAGS)
(cat_mod_SOURCES, cat_mod_CFLAGS, font_mod_SOURCES)
(font_mod_CFLAGS, amiga_mod_SOURCES, amiga_mod_CFLAGS)
(apple_mod_SOURCES, apple_mod_CFLAGS, pc_mod_SOURCES)
(pc_mod_CFLAGS): New variables.
* disk/powerpc/ieee1275/ofdisk.c: Include <grub/machine/init.h>.
(grub_ofdisk_iterate): Add a prototype for `dev_iterate'.
* include/grub/dl.h (grub_arch_dl_sync_caches): New prototype.
* include/grub/loader.h (grub_os_area_addr, grub_os_area_size):
Moved from here...
* include/grub/i386/pc/init.h (grub_os_area_addr)
(rub_os_area_size): ... to here.
* include/grub/powerpc/ieee1275/ieee1275.h
(grub_ieee1275_entry_fn): Export symbol.
* include/grub/powerpc/ieee1275/init.h: New file.
* include/grub/powerpc/libgcc.h: Likewise.
* include/grub/cache.h: Likewise.
* kern/powerpc/cache.S: Likewise. Written by Hollis Blanchard
<hollis@penguinppc.org>.
* kern/dl.c: Include <grub/cache.h>.
(grub_dl_flush_cache): New function.
(grub_dl_load_core): Call `grub_dl_flush_cache' to flush the cache
for this module.
* kern/powerpc/ieee1275/init.c (grub_ofdisk_init)
(grub_console_init): Removed prototypes.
(grub_machine_init): Don't initialize the modules anymore.
* kern/powerpc/ieee1275/openfw.c (grub_map): Make the function
static.
* include/grub/powerpc/types.h (GRUB_HOST_WORDS_LITTLEENDIAN):
Macro undef removed.
(GRUB_HOST_WORDS_BIGENDIAN): New macro.
* kern/powerpc/dl.c (grub_arch_dl_relocate_symbols): Add
relocation `R_PPC_REL32'. Return an error when the relocation is
unknown.
* Makefile.in (DATA): Add `$(pkgdata_PROGRAMS)'.
* kern/i386/pc/init.c (grub_arch_sync_caches): New function.
* util/misc.c (grub_arch_sync_caches): Likewise.
* fs/ext2.c (grub_ext2_open): Don't use data after freeing it.
(grub_ext2_dir): Likewise. Don't return in case of an error, jump
to fail instead. Reported by Vincent Pelletier
<subdino2004@yahoo.fr>.
* fs/fshelp.c (grub_fshelp_find_file): Don't free `oldnode' when
it is not allocated. Reported by Vincent Pelletier
<subdino2004@yahoo.fr>.
* normal/cmdline.c (grub_tab_complete): Add a blank line to the
output so the output looks better.
Modulize the partition map support and add support for the amiga
partition map.
* commands/ls.c: Include <grub/partition.h> instead of
<grub/machine/partition.h>.
* kern/disk.c: Likewise.
* kern/rescue.c: Likewise.
* loader/i386/pc/chainloader.c: Likewise.
* normal/cmdline.c: Likewise.
* kern/powerpc/ieee1275/init.c: Likewise.
(grub_machine_init): Call `grub_pc_partition_map_init',
`grub_amiga_partition_map_init' and
`grub_apple_partition_map_init'.
* conf/i386-pc.rmk (kernel_img_SOURCES): Remove
`disk/i386/pc/partition.c'. Add `kern/partition.c'.
(kernel_img_HEADERS): Remove `machine/partition.h'. Add
`partition.h' and `pc_partition.h'.
(grub_setup_SOURCES): Remove
`disk/i386/pc/partition.c'. Add `kern/partition.c',
`partmap/amiga.c', `partmap/apple.c' and `partmap/pc.c'.
(grub_emu_SOURCES): Likewise.
(pkgdata_MODULES): Add `amiga.mod', `apple.mod' and `pc.mod'.
(amiga_mod_SOURCES, amiga_mod_CFLAGS, apple_mod_SOURCES)
(apple_mod_CFLAGS, pc_mod_SOURCES, pc_mod_CFLAGS): New variables.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Remove
`disk/powerpc/ieee1275/partition.c'. Add `kern/partition.c',
`partmap/amiga.c', `partmap/apple.c' and `partmap/pc.c'.
(grubof_SOURCES): Likewise.
* disk/i386/pc/partition.c: File removed.
* disk/powerpc/ieee1275/partition.c: Likewise.
* include/grub/powerpc/ieee1275/partition.h: Likewise.
* include/grub/i386/pc/partition.h: Likewise.
* kern/partition.c: New file.
* partmap/amiga.c: Likewise.
* partmap/apple.c: Likewise.
* partmap/pc.c: Likewise.
* include/grub/partition.h: Likewise..
* include/grub/pc_partition.h: Likewise.
* util/grub-emu.c: Include <grub/partition.h> instead of
<grub/machine/partition.h>.
(main): Call `grub_pc_partition_map_init',
`grub_amiga_partition_map_init' and
`grub_apple_partition_map_init' and deinitialize afterwards.
* util/i386/pc/biosdisk.c: Include `#include
<grub/partition.h>' and `include <grub/pc_partition.h>' instead of
`<grub/machine/partition.h>'.
* util/i386/pc/grub-setup.c: Likewise.
* util/i386/pc/biosdisk.c: Likewise.
(grub_util_biosdisk_get_grub_dev): Only access the PC specific
partition information in case of a PC partition.
* util/i386/pc/grub-setup.c: Include `#include
<grub/partition.h>' and `include <grub/pc_partition.h>' instead of
`<grub/machine/partition.h>'.
(setup): Only access the PC specific partition information in case
of a PC partition.
* kern/powerpc/ieee1275/openfw.c (grub_devalias_iterate): Skip any
property named `name'. Correctly handle the error returned by
`grub_ieee1275_finddevice' if a device can not be opened.
* term/i386/pc/vga.c (VGA_HEIGHT): Changed to 350.
(PAGE_OFFSET): New macro.
(CRTC_ADDR_PORT): Likewise.
(CRTC_DATA_PORT): Likewise.
(START_ADDR_HIGH_REGISTER): Likewise.
(START_ADDR_LOW_REGISTER): Likewise.
(GRAPHICS_ADDR_PORT): Likewise.
(GRAPHICS_DATA_PORT): Likewise.
(READ_MAP_REGISTER): Likewise.
(INPUT_STATUS1_REGISTER): Likewise.
(INPUT_STATUS1_VERTR_BIT): Likewise.
(page): New variable.
(wait_vretrace): New function.
(set_read_map): Likewise.
(set_start_address): Likewise.
(grub_vga_init): Use mode 0x10 instead of mode 0x12. Switch to
the right page.
(check_vga_mem): Take the page into account.
(write_char): Likewise.
(write_cursor): Likewise.
(scroll_up): Likewise. Copy the page to the page that is not
shown and switch between both pages.
(grub_vga_putchar): Fix off by one error.
(grub_vga_cls): Wait for the vertical retrace. Take the page into
account.
* disk/powerpc/ieee1275/ofdisk.c (grub_ofdisk_open): Do not
append ":0" to devpath if the GRUB_IEEE1275_NO_PARTITION_0 flag is
set in grub_ieee1275_flags.
* include/grub/powerpc/ieee1275/ieee1275.h (abort): Add function
prototype.
* kern/powerpc/ieee1275/init.c (grub_machine_init): Call
grub_console_init first.
Change the memory range used for grub_ieee1275_claim and
grub_mm_init_region.
Print an error message if the claim fails.
Include <grub/misc.h>.
* disk/powerpc/ieee1275/ofdisk.c (grub_ofdisk_iterate):
Call grub_children_iterate for device nodes of type `scsi',
`ide', or `ata'.
(grub_ofdisk_open): Remove manual device alias resolution.
Fix memory leak when device cannot be opened.
* include/grub/powerpc/ieee1275/ieee1275.h
(grub_children_iterate): New prototype.
* kern/powerpc/ieee1275/openfw.c (grub_children_iterate):
New function.
* boot/powerpc/ieee1275/ieee1275.c (grub_ieee1275_get_property):
Return -1 if args.size was -1.
* boot/powerpc/ieee1275/cmain.c (grub_ieee1275_flags): New global.
(cmain): Accept 3 parameters. Test for 0xdeadbeef, indicating Old
World Macintosh. If Old Wold, set flag in grub_ieee1275_flags; claim
Open Firmware's memory for it; claim memory from _start to _end.
* boot/powerpc/ieee1275/crt0.S (__bss_start): New extern.
(_end): New extern.
(_start): Zero BSS from __bss_start to _end.
* include/grub/powerpc/ieee1275/ieee1275.h (grub_ieee1275_flags):
New extern.
(GRUB_IEEE1275_NO_PARTITION_0): New #define.
* boot/powerpc/ieee1275/ieee1275.c (grub_ieee1275_claim): change
void * arguments to grub_addr_t. All callers updated. Also make
the `result' argument optional.
(grub_ieee1275_release): change void * arguments to grub_addr_t.
All callers updated.
* commands/ls.c (grub_ls_list_files): Use the string following the
initial ')', if present, as the filesystem path.
* kern/rescue.c (grub_rescue_cmd_ls): Likewise.
* conf/powerpc-ieee1275.rmk (grubof_SOURCES): List crt0.S first.
Make the source code of the menu interface more readable.
* normal/menu.c: Include grub/mm.h.
(TERM_WIDTH): New macro.
(TERM_HEIGHT): Likewise.
(TERM_INFO_HEIGHT): Likewise.
(TERM_MARGIN): Likewise.
(TERM_SCROLL_WIDTH): Likewise.
(TERM_TOP_BORDER_Y): Likewise.
(TERM_LEFT_BORDER_X): Likewise.
(TERM_BORDER_WIDTH): Likewise.
(TERM_MESSAGE_HEIGHT): Likewise.
(TERM_BORDER_HEIGHT): Likewise.
(TERM_NUM_ENTRIES): Likewise.
(TERM_FIRST_ENTRY_Y): Likewise.
(TERM_ENTRY_WIDTH): Likewise.
(TERM_CURSOR_X): Likewise.
(draw_border): Use macros instead of magic numbers.
(print_entry): Likewise.
(print_entries): Likewise.
(run_menu): Likewise. Also, handle the key 'e'.
(run_menu_entry): Ignore empty command lines.
(print_message): Added a new argument EDIT. If EDIT is true,
print a different message.
(init_page): Likewise.
(edit_menu_entry): New function. Not implemented yet.
Add `linux.mod' and `multiboot.mod' so linux and multiboot kernels
can be loaded from normal mode.
* conf/i386-pc.rmk (pkgdata_MODULES): Add `linux.mod' and
`multiboot.mod'.
(linux_mod_SOURCES, linux_mod_CFLAGS, multiboot_mod_SOURCES)
(multiboot_mod_CFLAGS): New variables.
* loader/i386/pc/linux_normal.c: New file.
* loader/i386/pc/multiboot_normal.c: Likewise.
* loader/i386/pc/linux.c (grub_rescue_cmd_initrd): Don't use the
attribute `unused'.
* fs/ext2.c (grub_ext2_iterate_dir): Fix typos in inode type. Use
`fdiro' to read the mode information from instead of `diro'.
* fs/fshelp.c (grub_fshelp_find_file): Set type to foundtype after
looking up a symlink.
* include/grub/normal.h (GRUB_COMMAND_FLAG_NO_ARG_PARSE): New
macro.
* normal/command.c (grub_command_execute): Don't parse the
arguments when `GRUB_COMMAND_FLAG_NO_ARG_PARSE' is set in the
flags of the command.
* normal/menu.c (grub_menu_run): Fix typo.
From Hollis Blanchard <hollis@penguinppc.org>:
* kern/misc.c (memmove): New alias for grub_memmove.
(memcmp): New alias for grub_memcmp.
(memset): New alias for grub_memset.
* boot/powerpc/ieee1275/ieee1275.c (grub_ieee1275_get_property):
Change "int handle" to "grub_ieee1275_phandle_t handle".
* include/grub/powerpc/ieee1275/ieee1275.h
(grub_ieee1275_get_property): Likewise.
Added normal mode command `chainloader' as module chain.mod, which
depends on normal.mod and _chain.mod.
* conf/i386-pc.rmk (pkgdata_MODULES): Add `chain.mod'.
(chain_mod_SOURCES, chain_mod_CFLAGS): Variables added.
* include/grub/i386/pc/loader.h (grub_rescue_cmd_chainloader):
Deleted prototype.
* loader/i386/pc/chainloader.c (grub_rescue_cmd_chainloader): All
but arguments parsing moved to ...
(grub_chainloader_cmd): ... here. New function.
* include/grub/i386/pc/chainloader.h: New file.
* loader/i386/pc/chainloader_normal.c: Likewise.
* conf/i386-pc.rmk (kernel_img_SOURCES): Added kern/fshelp.c.
(grub_mkimage_LDFLAGS): Likewise.
(grub_emu_SOURCES): Likewise.
(kernel_img_HEADERS): Added fshelp.h.
* fs/ext2.c: Include <grub/fshelp.h>.
(FILETYPE_REG): New macro.
(FILETYPE_INO_REG): Likewise.
(grub_ext_sblock): Renamed to `grub_ext2_sblock'.
Changed all users.
(ext2_block_group): Renamed to `grub_ext2_block_group'. Changed
all users.
(grub_fshelp_node): New struct.
(grub_ext2_data): Added member `diropen'. Changed member `inode'
to a pointer.
(grub_ext2_get_file_block): Removed function.
(grub_ext2_read_block): New function.
(grub_ext2_read_file): Replaced parameter `data' by `node'.
This function was written.
(grub_ext2_mount): Read the root inode. Create a diropen struct.
(grub_ext2_find_file): Removed function.
(grub_ext2_read_symlink): New function.
(grub_ext2_iterate_dir): Likewise.
(grub_ext2_open): Rewritten.
(grub_ext2_dir): Rewritten.
* include/grub/fshelp.h: New file.
* fs/fshelp.c: Likewise.
* normal/menu.c: Include grub/loader.h and grub/machine/time.h.
(print_message): Add a missing newline.
(run_menu): Added timeout support.
(run_menu_entry): New local function.
(grub_menu_run): Added support for booting.
* kern/loader.c (grub_loader_is_loaded): New function.
* include/grub/powerpc/ieee1275/time.h: Include grub/symbol.h.
(grub_get_rtc): Exported.
* include/grub/i386/pc/time.h: Include grub/symbol.h.
(grub_get_rtc): Exported.
* include/grub/normal.h (struct grub_command_list): Remove
constant from the member `command'.
* include/grub/loader.h (grub_loader_is_loaded): Declared.
* include/grub/err.h (GRUB_ERR_INVALID_COMMAND): New constant.
* conf/i386-pc.rmk (kernel_img_HEADERS): Added machine/time.h.
Add support for the JFS filesystem.
* fs/jfs.c: New file.
* include/grub/fs.h (grub_jfs_init): New prototype.
(grub_jfs_fini): New prototype.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add fs/jfs.c.
(grub_emu_SOURCES): Likewise.
(pkgdata_MODULES): Add jfs.mod.
(jfs_mod_SOURCES): New variable.
(jfs_mod_CFLAGS): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add fs.jfs.c.
(grubof_SOURCES): Likewise.
* util/grub-emu.c (main): Initialize and deinitialize JFS support.
* fs/fat.c (grub_fat_find_dir): Convert the filename little
endian to the host endian.
(grub_fat_utf16_to_utf8): Move function from there...
* kern/misc.c (grub_utf16_to_utf8): ...to here. Do not convert
the endianess of the source string anymore.
* include/grub/misc.h (grub_utf16_to_utf8): New prototype.
* commands/boot.c (grub_boot_init) [GRUB_UTIL]: Make conditional.
(grub_boot_fini) [GRUB_UTIL]: Likewise.
(GRUB_MOD_INIT) [!GRUB_UTIL]: Likewise.
(GRUB_MOD_FINI) [!GRUB_UTIL]: Likewise.
* fs/hfs.c (grub_hfs_find_node): Add a prototype for `node_found'.
(grub_hfs_iterate_dir): Make the function static. Add prototypes
for `node_found' and `it_dir'.
(grub_hfs_dir): Add prototype for `dir_hook'.
* fs/minix.c (grub_minix_get_file_block): Add prototype for
`grub_get_indir'. Rename `indir' in two blocks to `indir16'
and `indir32' to silence a gcc warning.
* include/grub/fs.h (grub_hfs_init): New prototype.
(grub_hfs_fini): Likewise.
Each disk device has its own id now. This is useful to make use
of multiple disk devices.
* include/grub/disk.h (grub_disk_dev_id): New enum.
(GRUB_DISK_DEVICE_BIOSDISK_ID): New constant.
(GRUB_DISK_DEVICE_OFDISK_ID): Likewise.
* disk/i386/pc/biosdisk.c (grub_biosdisk_dev): Specify
GRUB_DISK_DEVICE_BIOSDISK_ID as an id.
* disk/powerpc/ieee1275/ofdisk.c (grub_ofdisk_dev): Specify
GRUB_DISK_DEVICE_OFDISK_ID as an id.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_dev): Specify
GRUB_DISK_DEVICE_BIOSDISK_ID as an id.
* include/grub/disk.h (struct grub_disk_dev): Added a new member
"id" which is used by the cache manager.
* normal/main.c (grub_normal_init_page): Use "GNU GRUB" instead
of just "GRUB".
* include/grub/arg.h (GRUB_ARG_OPTION_OPTIONAL): Surround macro
with parentheses.
* fs/ext2.c (FILETYPE_UNKNOWN): New macro.
(grub_ext2_dir): In case the directory entry type is unknown, read
it from the inode.
* loader/powerpc/ieee1275/linux.c (grub_linux_init): Pass
grub_load_linux instead of grub_rescue_cmd_linux as second
argument of grub_rescue_register_command.
* Makefile.in (RMKFILES): Add conf/powerpc-ieee1275.rmk.
* normal/arg.c (grub_arg_parse): Correct error handling after
reallocating the argumentlist (check if `argl' is not null instead
of checking if `args' is not null).
* kern/mm.c (grub_realloc): Return the same pointer when using the
same region, instead of returning the header address.
* disk/powerpc/ieee1275/partition.c (grub_partition_iterate): Skip
one block instead of two when looking for the initial partition.
(grub_partition_probe): Initialize the local variable `p' with 0.
Use base 10 for the grub_strtoul call.
* kern/misc.c (grub_strncpy): Fix off by one bug. Eliminated the
need for one local variable.
(grub_strtoul): Don't add the new value to `num', instead of that
just assign it.
* conf/i386-pc.rmk (pkgdata_IMAGE): Add pxeboot.img.
(pxeboot_img_SOURCES): New variable.
(pxeboot_img_ASFLAGS): Likewise.
(pxeboot_img_LDFLAGS): Likewise.
* boot/i386/pc/pxeboot.S: New file. Based on pxeloader.S from
GRUB Legacy and boot.S. Adopted for GRUB 2 by lode leroy
<lode_leroy@hotmail.com>.
* fs/ext2.c (FILETYPE_INO_MASK, FILETYPE_INO_DIRECTORY)
(FILETYPE_INO_SYMLINK): New macros.
(grub_ext2_find_file): Check if the node is a directory using the
inode stat information instead of using the filetype in the
dirent. Exclude the first character of an absolute symlink.
(grub_ext2_dir): Mask out the filetype part of the mode member of
the inode.
Add support for UFS version 1 and 2. Add support for the minix
filesystem version 1 and 2, both the variants with 14 and 30 long
filenames.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add fs/ufs.c and
fs/minix.c.
(grub_emu_SOURCES): Likewise.
(pkgdata_MODULES): Add ufs.mod and minix.mod.
(ufs_mod_SOURCES): New variable.
(ufs_mod_CFLAGS): Likewise.
(minix_mod_SOURCES): Likewise.
(minix_mod_CFLAGS): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add fs/ufs.c and
fs/minix.c.
(grubof_SOURCES): Likewise.
* fs/ufs.c: New file.
* fs/minix.c: New file.
* include/grub/fs.h (grub_ufs_init): New prototype.
(grub_ufs_fini): Likewise.
(grub_minix_init): Likewise.
(grub_minix_fini): Likewise.
* util/grub-emu.c (main): Initialize and deinitialize UFS and
minix fs.
All symbols prefixed with PUPA_ and pupa_ are renamed to GRUB_
and grub_, respectively. Because the conversion is trivial and
mechanical, I omit the details here. Please refer to the CVS
if you need more information.
Add support for the newworld apple macintosh (PPC). This has been
tested on the powerbook 2000 only. It only adds support for
generic ieee1275 functions, console and disk support. This should
be easy to port to other architectures with support for Open
Firmware.
* configure.ac: Accept the powerpc as host_cpu. In the case of
the powerpc cpu set the host_vendor to ieee1275. Make sure the i386
specific tests are only executed while building for the i386.
Inverse test for crosscompile.
* genmk.rb (Utility): Allow assembler files.
* normal/cmdline.c (pupa_tab_complete): Reset pupa_errno.
* conf/powerpc-ieee1275.rmk: New file.
* disk/powerpc/ieee1275/ofdisk.c: Likewise.
* disk/powerpc/ieee1275/partition.c: Likewise.
* include/pupa/powerpc/ieee1275/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/console.h: Likewise.
* include/pupa/powerpc/ieee1275/partition.h: Likewise.
* include/pupa/powerpc/ieee1275/time.h: Likewise.
* include/pupa/powerpc/ieee1275/util/biosdisk.h: Likewise.
* include/pupa/powerpc/ieee1275/multiboot.h: Likewise.
* include/pupa/powerpc/ieee1275/loader.h
* include/pupa/powerpc/setjmp.h: Likewise.
* include/pupa/powerpc/types.h: Likewise.
* kern/powerpc/ieee1275/init.c: Likewise.
* kern/powerpc/ieee1275/openfw.c: Likewise.
* term/powerpc/ieee1275/ofconsole.c: Likewise.
These files were written by Johan Rydberg
(jrydberg@night.trouble.net) and I only modified them slightly.
* boot/powerpc/ieee1275/cmain.c: New file.
* boot/powerpc/ieee1275/crt0.S: Likewise.
* boot/powerpc/ieee1275/ieee1275.c: Likewise.
* include/pupa/powerpc/ieee1275/ieee1275.h: Likewise.
* commands/boot.c: New file.
* commands/cat.c: Likewise.
* commands/cmp.c: Likewise.
* commands/ls.c: Likewise.
* commands/terminal.c: Likewise.
* normal/command.c: Include <pupa/env.h> and <pupa/dl.h>.
(pupa_register_command): Changed interface to match the new
argument parser.
(pupa_command_execute): Changed (almost rewritten) so it uses
pupa_split_command. Added support for setting variables using the
syntax `foo=bar'.
(rescue_command): Changed to work with the new argument parser.
(terminal_command): Moved from here to commands/terminal.c.
(set_command): New function.
(unset_command): New function.
(insmod_command): New function.
(rmmod_command): New function.
(lsmod_command): New function.
(pupa_command_init): Don't initialize the command terminal
anymore. Initialize the commands set, unset, insmod, rmmod and
lsmod.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add kern/env.c.
(kernel_img_HEADERS): Add arg.h and env.h.
(pupa_mkimage_LDFLAGS): Add kern/env.c.
(pupa_emu_SOURCES): Add kern/env.c, commands/ls.c,
commands/terminal.c commands/boot.c commands/cmp.c commands/cat.c,
normal/arg.c.
(pkgdata_MODULES): Add ls.mod, boot.mod, cmp.mod, cat.mod and
terminal.mod.
(normal_mod_SOURCES): Add normal/arg.c and normal/arg.c.
(boot_mod_SOURCES): New variable.
(terminal_mod_SOURCES): Likewise.
(ls_mod_SOURCES): Likewise.
(cmp_mod_SOURCES): Likewise.
(cat_mod_SOURCES): Likewise.
* normal/arg.c: New file.
* kern/env.c: Likewise.
* include/pupa/arg.h: Likewise.
* include/pupa/env.h: Likewise.
* font/manager.c (font_command): Changed to match argument parsing
interface changes.
(PUPA_MOD_INIT): Likewise.
* hello/hello.c (pupa_cmd_hello): Likewise.
(PUPA_MOD_INIT): Likewise.
* include/pupa/disk.h: Include <pupa/device.h>.
(pupa_print_partinfo): New prototype.
* include/pupa/dl.h (pupa_dl_set_prefix): Prototype removed.
(pupa_dl_get_prefix): Likewise.
* include/pupa/misc.h: Include <pupa/err.h>.
(pupa_isgraph): New prototype.
(pupa_isdigit): Likewise.
(pupa_split_cmdline): Likewise.
* include/pupa/normal.h: Include <pupa/arg.h>.
(pupa_command): Changed the prototype of the member `func' to
match the argument parsing interface. Added member `options'.
(pupa_register_command): Updated to match function.
(pupa_arg_parse): New prototype.
(pupa_hello_init) [PUPA_UTIL]: New prototype.
(pupa_hello_fini) [PUPA_UTIL]: Likewise.
(pupa_ls_init) [PUPA_UTIL]: Likewise.
(pupa_ls_fini) [PUPA_UTIL]: Likewise.
(pupa_cat_init) [PUPA_UTIL]: Likewise.
(pupa_cat_fini) [PUPA_UTIL]: Likewise.
(pupa_boot_init) [PUPA_UTIL]: Likewise.
(pupa_boot_fini) [PUPA_UTIL]: Likewise.
(pupa_cmp_init) [PUPA_UTIL]: Likewise.
(pupa_cmp_fini) [PUPA_UTIL]: Likewise.
(pupa_terminal_init) [PUPA_UTIL]: Likewise.
(pupa_terminal_fini) [PUPA_UTIL]: Likewise.
* kern/disk.c: Include <pupa/file.h>.
(pupa_print_partinfo): New function.
* kern/dl.c: Include <pupa/env.h>.
(pupa_dl_dir): Variable removed.
(pupa_dl_load): Use the environment variable `prefix' instead of
the variable pupa_dl_dir.
(pupa_dl_set_prefix): Function removed.
(pupa_dl_get_prefix): Likewise.
* kern/i386/pc/init.c: Include <pupa/env.h>.
(pupa_machine_init): Use the environment variable `prefix' instead of
using pupa_dl_set_prefix to set the prefix.
* kern/main.c: Include <pupa/env.h>.
(pupa_set_root_dev): Use the environment variable `prefix' instead of
using pupa_dl_get_prefix to get the prefix.
* kern/misc.c: Include <pupa/env.h>.
(pupa_isdigit): New function.
(pupa_isgraph): Likewise.
(pupa_ftoa): Likewise.
(pupa_vsprintf): Added support for printing values of the type
`double'. Make it possible to format variable output when using
formatting like `%1.2%f'.
(pupa_split_cmdline): New function.
* kern/rescue.c: Include <pupa/env.h>.
(next_word): Removed function.
(pupa_rescue_cmd_prefix): Likewise.
(pupa_rescue_cmd_set): New function.
(pupa_rescue_cmd_unset): New function.
(pupa_enter_rescue_mode): Use the `pupa_split_cmdline' function to
split the command line instead of splitting it here. Added
support for setting variables using the syntax `foo=bar'. Don't
initialize the prefix command anymore. Initialized the set and
unset commands.
* normal/cmdline.c: Include <pupa/env.h>.
(pupa_tab_complete): Added prototypes for print_simple_completion,
print_partition_completion, add_completion, iterate_commands,
iterate_dev, iterate_part and iterate_dir. Moved code to print
partition information from here to kern/disk.c.
(pupa_cmdline_run): Don't check if the funtion exists anymore.
* normal/main.c: Include <pupa/env.h>.
(pupa_rescue_cmd_normal): Use the environment variable `prefix'
instead of using pupa_dl_get_prefix to get the prefix.
* term/i386/pc/vga.c: Include <pupa/arg.h>.
(check_vga_mem): Cast pointers to `void *' to silence a gcc
warning.
(pupa_vga_putchar) [! DEBUG_VGA]: Removed for this case.
(pupa_vga_setcolor): Declare unused variables with `__attribute__
((unused))' to silence a gcc warning.
(pupa_vga_setcolor): Likewise.
(debug_command): Changed to match argument parsing
interface changes.
* util/pupa-emu.c: Include <pupa/env.h>.
(options): Added 0's for unused fields to silence a gcc warning.
(argp): Likewise.
(main): Use the environment variable `prefix' instead of using
pupa_dl_set_prefix to set the prefix. Initialize the commands ls,
boot, cmp, cat and terminal. Finish the commands boot, cmp, cat
and terminal.
* util/i386/pc/getroot.c: Include <pupa/i386/pc/util/biosdisk.h>.
* util/misc.c: Include <malloc.h>.
(pupa_malloc): Rewritten so errors are correctly reported.
(pupa_realloc): Likewise.
(pupa_memalign): Likewise.
(pupa_mm_init_region): Declare unused variables with
`__attribute__ ((unused))' to silence a gcc warning.
* normal/i386/setjmp.S: Remove tab at the end of the file to
silence a gcc warning.
* loader/i386/pc/linux.c (pupa_rescue_cmd_initrd): Declare unused
variables with `__attribute__ ((unused))' to silence a gcc
warning.
* loader/i386/pc/multiboot.c (pupa_multiboot_unload): Make the
local variable i unsigned to silence a gcc warning.
* kern/term.c: Include <pupa/misc.h>.
(pupa_more_lines): New variable.
(pupa_more): Likewise.
(pupa_putcode): When the pager is active pause at the end of every
screen.
(pupa_set_more): New function.
* include/pupa/term.h (pupa_set_more): New prototype.
Now this project is GRUB 2 rather than PUPA. The location of
the CVS repository was moved to GRUB's.
* configure.ac: Use bug-grub as the reporting address.
Use GRUB instead of PUPA.
Change the version number to 1.90.
* fs/ext2.c (pupa_ext2_read_file): Correct the value of BLOCKEND
when it is EXT2_BLOCK_SIZE (data). New argument READ_HOOK, all
callers changed. Set DATA->DISK->READ_HOOK to READ_HOOK before
reading and reset it after reading.
(pupa_ext2_close): Return PUPA_ERR_NONE.
* include/pupa/i386/pc/linux.h (PUPA_LINUX_INITRD_MAX_ADDRESS):
Correct value.
(struct linux_kernel_header): Add kernel_version and
initrd_addr_max.
* loader/i386/pc/linux.c (pupa_rescue_cmd_linux): Check whether
pupa_file_read succeeds.
(pupa_rescue_cmd_initrd): Implement.
* disk/i386/pc/biosdisk.c (pupa_biosdisk_open): Correctly check
for available extensions.
* include/pupa/i386/pc/time.h: New file.
* kern/disk.c: Include <pupa/machine/time.h>.
(PUPA_CACHE_TIMEOUT): New macro.
(pupa_last_time): New variable.
(pupa_disk_open): Flush the cache when there was a timeout.
(pupa_disk_close): Reset the timer.
* kern/i386/pc/startup.S (pupa_get_rtc): Renamed from
pupa_currticks.
* util/misc.c: Include <sys/times.h>
(pupa_get_rtc): New function.
* fs/ext2.c (struct pupa_ext2_inode): Declare struct datablocks
as blocks.
(pupa_ext2_get_file_block): Use blocks member.
* fs/ext2.c (pupa_ext2_read_file): Only set skipfirst for the
first block. Return -1 instead of pupa_errno on error.
* README: In the pupa-mkimage example use _chain instead of chain
and ext2 instead of fat.
* TODO: Replace ext2fs with jfs as an example. Add an item for
adding journal playback for ext2fs.
* conf/i386-pc.rmk (pupa_setup_SOURCES): Added fs/ext2.c.
(pkgdata_MODULES): Added ext2.mod.
(ext2_mod_SOURCES): New variable.
(ext2_mod_CFLAGS): Likewise.
* include/pupa/err.h (pupa_err_t): Added PUPA_ERR_SYMLINK_LOOP.
* include/pupa/misc.h (pupa_strncpy): New prototype.
(pupa_strcat): Likewise.
(pupa_strncmp): Likewise.
* kern/misc.c (pupa_strcat): Enable function.
(pupa_strncpy): New function.
(pupa_strncmp): Likewise.
* fs/ext2.c: New file.
* kern/disk.c (pupa_disk_read): Set pupa_errno to PUPA_ERR_NONE
when the read failed before retrying.
* util/i386/pc/biosdisk.c (_LARGEFILE_SOURCE): Removed.
(_FILE_OFFSET_BITS): Likewise.
* configure.ac: Added AC_SYS_LARGEFILE.
I forgot to check in these changes for a long time. This adds
incomplete support for VGA console, and this is still very
buggy. Also, a lot of consideration is required for I18N,
UNICODE, and VGA font issues. Therefore, assume that this is
such that "better than nothing".
* font/manager.c: New file.
* include/pupa/font.h: Likewise.
* include/pupa/i386/pc/vga.h: Likewise.
* term/i386/pc/vga.c: Likewise.
* util/unifont2pff.rb: Likewise.
* conf/i386-pc.rmk (kernel_img_HEADERS): Added machine/vga.h.
(pkgdata_MODULES): Added vga.mod and font.mod.
(vga_mod_SOURCES): New variables.
(vga_mod_CFLAGS): Likewise.
(font_mod_SOURCES): Likewise.
(font_mod_CFLAGS): Likewise.
* include/pupa/err.h (PUPA_ERR_BAD_FONT): New constant.
* include/pupa/term.h: Include pupa/err.h.
(struct pupa_term): Added init and fini.
Changed the argument of putchar to pupa_uint32_t.
* include/pupa/i386/pc/console.h: Include pupa/symbol.h.
(pupa_console_real_putchar): New prototype.
(pupa_console_putchar): Removed.
(pupa_console_checkkey): Exported.
(pupa_console_getkey): Likewise.
* kern/misc.c (pupa_vsprintf): Add support for UNICODE
characters.
* kern/term.c (pupa_term_set_current): Rewritten.
(pupa_putchar): Likewise.
(pupa_putcode): New function.
* kern/i386/pc/startup.S (pupa_console_putchar): Renamed to ...
(pupa_console_real_putchar): ... this.
(pupa_vga_set_mode): New function.
(pupa_vga_get_font): Likewise.
* normal/command.c: Include pupa/term.h.
(terminal_command): New function.
(pupa_command_init): Register the command "terminal".
* normal/menu.c (DISP_LEFT): Changed to a UNICODE value.
(DISP_UP): Likewise.
(DISP_RIGHT): Likewise.
(DISP_DOWN): Likewise.
(DISP_HLINE): Likewise.
(DISP_VLINE): Likewise.
(DISP_UL): Likewise.
(DISP_UR): Likewise.
(DISP_LL): Likewise.
(DISP_LR): Likewise.
* term/i386/pc/console.c (pupa_console_putchar): New function.
* kern/i386/pc/lzo1x.S: New file.
* util/i386/pc/pupa-mkimage.c: Include lzo1x.h.
(compress_kernel): New variable.
(generate_image): Heavily modified to support compressing a
large part of the core image.
* util/misc.c (pupa_util_read_image): Fix a file descriptor
leak.
(pupa_util_load_image): New function.
* kern/i386/pc/startup.S: Include pupa/machine/kernel.h.
(pupa_compressed_size): New variable.
(codestart): Enable Gate A20 here.
Decompress the compressed part of the core image.
Rearrange the code to put functions and variables which are
required for initialization in the non-compressed part.
Include lzo1x.S.
* kern/i386/pc/init.c (pupa_machine_init): Don't enable Gate A20
here.
* include/pupa/util/misc.h (pupa_util_write_image): Declared.
* include/pupa/i386/pc/kernel.h
(PUPA_KERNEL_MACHINE_COMPRESSED_SIZE): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): Increased by 4.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(PUPA_KERNEL_MACHINE_RAW_SIZE): New macro.
* conf/i386-pc.rmk (pupa_mkimage_LDFLAGS): New variable.
* genmk.rb (Image#rule): Put LDFLAGS at the end of a line.
(Utility#rule): Likewise.
* configure.ac: Check if LZO is available.
* include/pupa/normal.h: New file.
* include/pupa/setjmp.h: Likewise.
* include/pupa/i386/setjmp.h: Likewise.
* normal/cmdline.c: Likewise.
* normal/command.c: Likewise.
* normal/main.c: Likewise.
* normal/menu.c: Likewise.
* normal/i386/setjmp.S: Likewise.
* loader/i386/pc/linux.c (pupa_rescue_cmd_linux): Made global.
(pupa_rescue_cmd_initrd): Likewise.
* loader/i386/pc/chainloader.c (pupa_rescue_cmd_chainloader):
Likewise.
* kern/i386/pc/startup.S (translation_table): New variable.
(translate_keycode): New function.
(pupa_console_getkey): Call translate_keycode.
* kern/rescue.c (attempt_normal_mode): New function.
(pupa_enter_rescue_mode): Attempt to execute the normal mode. If
it failed, print a message.
* kern/mm.c (pupa_real_malloc): Print more information when a
free magic is broken.
(pupa_free): If the first free header is not free actually, set
it to P.
* kern/main.c (pupa_load_normal_mode): Just load the module
"normal".
(pupa_main): Don't print the message
"Entering into rescue mode..." here.
* include/pupa/i386/pc/loader.h (pupa_rescue_cmd_initrd):
Declared.
(pupa_rescue_cmd_initrd): Likewise.
(pupa_rescue_cmd_initrd): Likewise.
* include/pupa/symbol.h (FUNCTION): Specify the type.
(VARIABLE): Likewise.
* include/pupa/err.h (pupa_err_t): Added
PUPA_ERR_UNKNOWN_COMMAND.
* include/pupa/dl.h (pupa_dl_set_prefix): Exported.
(pupa_dl_get_prefix): Likewise.
* conf/i386-pc.rmk (pkgdata_MODULES): Added normal.mod.
Added _chain.mod and _linux.mod instead of chain.mod and
linux.mod.
(chain_mod_SOURCES): Renamed to ...
(_chain_mod_SOURCES): ... this.
(chain_mod_CFLAGS): Renamed to ...
(_chain_mod_CFLAGS): ... this.
(linux_mod_SOURCES): Renamed to ...
(_linux_mod_SOURCES): ... this.
(linux_mod_CFLAGS): Renamed to ...
(_linux_mod_CFLAGS): ... this.
(normal_mod_SOURCES): New variable.
(normal_mod_CFLAGS): Likewise.
(normal_mod_ASFLAGS): Likewise.
2003-01-18 Yoshinori K. Okuji <okuji@enbug.org>
* kern/rescue.c (pupa_rescue_cmd_rmmod): Call pupa_dl_unload, if
possible.
* kern/dl.c (pupa_dl_ref): Refer dependending modules
recursively.
(pupa_dl_unref): Unrefer depending modules recursively.
Don't call pupa_dl_unload implicitly, because PUPA can crash if
a module is unloaded before one depending on that module is
unloaded.
(pupa_dl_unload): Unload depending modules explicitly,
if possible.
* include/pupa/i386/pc/linux.h: New file.
* loader/i386/pc/linux.c: Likewise.
* loader/i386/pc/chainloader.c (pupa_chainloader_boot_sector):
Removed.
(pupa_chainloader_unload): Return PUPA_ERR_NONE.
(pupa_rescue_cmd_chainloader): Read the image to 0x7C00 instead
of PUPA_CHAINLOADER_BOOT_SECTOR.
* kern/i386/pc/startup.S: Include pupa/machine/linux.h.
(pupa_linux_prot_size): New variable.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): New function.
(pupa_linux_boot_bzimage): Likewise.
* kern/i386/pc/init.c (struct mem_region): New structure.
(MAX_REGIONS): New macro.
(mem_regions): New variable.
(num_regions): Likewise.
(pupa_os_area_addr): Likewise.
(pupa_os_area_size): Likewise.
(pupa_lower_mem): Likewise.
(pupa_upper_mem): Likewise.
(add_mem_region): New function.
(compact_mem_regions): Likewise.
(pupa_machine_init): Set PUPA_LOWER_MEM and PUPA_UPPER_MEM to
the size of the conventional memory and that of so-called upper
memory (before the first memory hole).
Instead of adding each found region to free memory, use
add_mem_region and add them after removing overlaps.
Also, add only 1/4 of the upper memory to free memory. The rest
is used for loading OS images. Maybe this is ad hoc, but this
makes it much easier to relocate OS images when booting.
* kern/rescue.c (pupa_rescue_cmd_module): Removed.
(pupa_enter_rescue_mode): Don't register initrd and module.
* kern/mm.c: Include pupa/dl.h.
* kern/main.c: Include pupa/file.h and pupa/device.h.
* kern/loader.c (pupa_loader_load_module_func): Removed.
(pupa_loader_load_module): Likewise.
* kern/dl.c (pupa_dl_load): Use the suffix ``.mod'' instead of
``.o''.
* include/pupa/i386/pc/loader.h (pupa_linux_prot_size): Declared.
(pupa_linux_tmp_addr): Likewise.
(pupa_linux_real_addr): Likewise.
(pupa_linux_boot_zimage): Likewise.
(pupa_linux_boot_bzimage): Likewise.
* include/pupa/i386/pc/init.h (pupa_lower_mem): Declared.
(pupa_upper_mem): Likewise.
(pupa_gate_a20): Don't export, because turning off Gate A20 in a
module is too dangerous.
* include/pupa/loader.h (pupa_os_area_addr): Declared.
(pupa_os_area_size): Likewise.
(pupa_loader_set): Remove the first argument. Loader doesn't
manage modules or initrd any longer.
(pupa_loader_load_module): Removed.
* conf/i386-pc.rmk (pkgdata_MODULES): Added linux.mod.
(linux_mod_SOURCES): New variable.
(linux_mod_CFLAGS): Likewise.
* util/i386/pc/pupa-setup.c (setup): Convert the endianness of
the length of a blocklist correctly.
* util/i386/pc/biosdisk.c (pupa_util_biosdisk_open) [__linux__]:
Use ioctl only if the OS file is a block device.
(pupa_util_biosdisk_open): Don't use ST.ST_BLOCKS, because it is
not very useful for normal files.
* kern/main.c (pupa_set_root_dev): New function.
(pupa_load_normal_mode): Likewise.
(pupa_main): Call those above.
* include/pupa/types.h (pupa_swap_bytes16): Cast the result to
pupa_uint16_t.
* include/pupa/kernel.h (pupa_enter_normal_mode): Removed.
* util/i386/pc/pupa-setup.c: Include pupa/machine/kernel.h.
(setup): Configure the installed partition information and the
dl prefix.
* loader/i386/pc/chainloader.c (my_mod): New variable.
(pupa_chainloader_unload): New function.
(pupa_rescue_cmd_chainloader): Refer itself.
(PUPA_MOD_INIT): Save its own module in MY_MOD.
* kern/i386/pc/startup.S (install_partition): Removed.
(version_string): Likewise.
(config_file): Likewise.
(pupa_install_dos_part): New variable.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_chainloader_real_boot): Call pupa_dl_unload_all.
* kern/i386/pc/init.c: Include pupa/machine/kernel.h, pupa/dl.h
and pupa/misc.h.
(make_install_device): New function.
(pupa_machine_init): Set the dl prefix.
* kern/rescue.c: Include pupa/rescue.h and pupa/dl.h.
(buf): Renamed to ...
(linebuf): ... this.
(pupa_rescue_cmd_prefix): New function.
(pupa_rescue_cmd_insmod): Likewise.
(pupa_rescue_cmd_rmmod): Likewise.
(pupa_rescue_cmd_lsmod): Likewise.
(pupa_enter_rescue_mode): Register new commands: prefix, insmod,
rmmod and lsmod.
* kern/mm.c (pupa_memalign): If failed even after invalidating
disk caches, unload unneeded modules and retry.
* kern/misc.c (pupa_memmove): New function.
(pupa_memcpy): Removed.
(pupa_strcpy): New function.
(pupa_itoa): Made static.
* kern/dl.c (pupa_dl_iterate): New function.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_unload): Return if succeeded or not.
(pupa_dl_unload_unneeded): New function.
(pupa_dl_unload_all): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): New function.
* include/pupa/i386/pc/kernel.h: Include pupa/types.h.
(PUPA_KERNEL_MACHINE_INSTALL_DOS_PART): New macro.
(PUPA_KERNEL_MACHINE_INSTALL_BSD_PART): Likewise.
(PUPA_KERNEL_MACHINE_PREFIX): Likewise.
(pupa_install_dos_part): Declared.
(pupa_install_bsd_part): Likewise.
(pupa_prefix): Likewise.
(pupa_boot_drive): Likewise.
* include/pupa/types.h: Fix a typo.
* include/pupa/misc.h (pupa_memcpy): New macro. Just an alias to
pupa_memmove.
(pupa_memmove): Declared.
(pupa_strcpy): Likewise.
* include/pupa/dl.h (PUPA_MOD_INIT): Change the prototype. Now
pupa_mod_init takes one argument, its own module.
(pupa_dl_unload_unneeded): Declared.
(pupa_dl_unload_all): Likewise.
(pupa_dl_ref): Likewise.
(pupa_dl_unref): Likewise.
(pupa_dl_iterate): Likewise.
(pupa_dl_init): Renamed to ...
(pupa_dl_set_prefix): ... this.
(pupa_dl_get_prefix): Declared.
* fs/fat.c [!PUPA_UTIL] (my_mod): New variable.
(pupa_fat_dir) [!PUPA_UTIL]: Prevent the fat module from being
unloaded.
(pupa_fat_open) [!PUPA_UTIL]: Refer itself if succeeded.
(pupa_fat_close) [!PUPA_UTIL]: Unrefer itself.
* configure.ac (tmp_CFLAGS): Added -Wshadow, -Wpointer-arith,
-Wmissing-prototypes, -Wundef and -Wstrict-prototypes.
* util/i386/pc/pupa-setup.c (setup): Define the internal
function find_first_partition_start at the top level, because GCC
3.0.x cannot compile internal functions in deeper scopes
correctly.
(find_root_device): Use lstat instead of stat.
Don't follow symbolic links.
Fix the path-constructing code.
* util/i386/pc/biosdisk.c [__linux__] (BLKFLSBUF): New macro.
(pupa_util_biosdisk_open) [__linux__]: Get the size of a device
by a BLKGETSIZE ioctl first, because block devices don't fill
the member st_mode of the structure stat on Linux.
[__linux__] (linux_find_partition): Use a temporary buffer
REAL_DEV for the working space. Copy it to DEV before returning.
(open_device) [__linux__]: Call ioctl with BLKFLSBUF to make the
buffer cache consistent.
(get_os_disk) [__linux__]: Use the length 5 instead of 4 for
strncmp. The previous value was merely wrong.
(pupa_util_biosdisk_get_pupa_dev): Use stat instead of lstat.
* fs/fat.c (pupa_fat_read_data): Shift 4 instead of 12 when the
FAT size is 12. The previous value was merely wrong.
* kern/main.c (pupa_main): Don't split the starting message from
newlines.
* kern/term.c (pupa_putchar): Put CR after LF instead of before
LF, because BIOS goes crazy about character attributes in this
case.
* include/i386/pc/util/biosdisk.h: New file.
* util/i386/pc/biosdisk.c: Likewise.
* util/i386/pc/pupa-setup.c: Likewise.
* Makefile.in (INCLUDE_DISTFILES): Added
include/pupa/i386/pc/util/biosdisk.h.
(UTIL_DISTFILES): Added biosdisk.c and pupa-setup.c under the
directory util/i386/pc.
(install-local): Added a rule for sbin_UTILITIES.
(uninstall): Likewise.
* util/i386/pc/pupa-mkimage.c (usage): Fix a typo in the doc.
* util/misc.c (xrealloc): New function.
(pupa_malloc): Likewise.
(pupa_free): Likewise.
(pupa_realloc): Likewise.
(pupa_stop): Likewise.
(pupa_putchar): Likewise.
* kern/disk.c (pupa_disk_read): Prevent L from underflowing.
* include/pupa/util/misc.h (xrealloc): Declared.
* include/pupa/i386/pc/boot.h (PUPA_BOOT_MACHINE_BPB_START): New
macro.
(PUPA_BOOT_MACHINE_BPBEND): Renamed to ...
(PUPA_BOOT_MACHINE_BPB_END): ... this.
* include/pupa/fs.h [PUPA_UTIL] (pupa_fat_init): Declared.
[PUPA_UTIL] (pupa_fat_fini): Likewise.
* fs/fat.c [PUPA_UTIL] (pupa_fat_init): Defined. Maybe a better
way should be implemented.
[PUPA_UTIL] (pupa_fat_fini): Likewise.
* disk/i386/pc/biosdisk.c (pupa_biosdisk_call_hook): Increase
the size of NAME for safety.
(pupa_biosdisk_iterate): Search hard disks to 0x90 instead of
0x88.
* conf/i386-pc.rmk (sbin_UTILITIES): New variable.
(pupa_setup_SOURCES): Likewise.
* genmk.rb (Utility#rule): Add $(BUILD_CFLAGS) into the rules.
Use -mrtd and -mregparm=3 to reduce the generated code sizes.
This means that any missing prototypes could be fatal. Also, you
must take care when writing assembly code. See the comments at
the beginning of startup.S, for more details.
* kern/i386/pc/startup.S (pupa_halt): Modified for the new
compilation mechanism.
(pupa_chainloader_real_boot): Likewise.
(pupa_biosdisk_rw_int13_extensions): Likewise.
(pupa_biosdisk_rw_standard): Likewise.
(pupa_biosdisk_check_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_int13_extensions): Likewise.
(pupa_biosdisk_get_diskinfo_standard): Likewise.
(pupa_get_memsize): Likewise.
(pupa_get_mmap_entry): Likewise.
(pupa_console_putchar): Likewise.
(pupa_console_setcursor): Likewise.
(pupa_getrtsecs): Use pushl instead of push.
* kern/i386/pc/init.c (pupa_machine_init): Use the scratch
memory instead of the stack for a mmap entry, because some
BIOSes may ignore the maximum size and overflow.
* conf/i386-pc.rmk (COMMON_CFLAGS): Added -mrtd and -mregparm=3.
* genmk.rb (PModule#rule): Compile automatically generated
sources with module-specific CFLAGS as well as other sources.
* configure.ac: Check ld.
Replace CFLAGS and CPPFLAGS with BUILD_CFLAGS and BUILD_CPPFLAGS
respectively, before checking endianness and sizes.
* Makefile.in (LD): New variable.
