GRUB_ERR_BAD_FS rather than GRUB_ERR_IO if the disk is not a pxe
disk; otherwise grub_fs_probe will not fall back to the next
filesystem.
(grub_pxefs_open): Likewise, for consistency.
Reported and tested by: Ezekiel Grave.
#551428.
* docs/man/grub-editenv.h2m (SEE ALSO): New section.
* docs/man/grub-emu.h2m (SEE ALSO): Likewise.
* docs/man/grub-fstest.h2m (SEE ALSO): Likewise.
* docs/man/grub-install.h2m (SEE ALSO): Likewise.
* docs/man/grub-macho2img.h2m (SEE ALSO): Likewise.
* docs/man/grub-menulst2cfg.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkconfig.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkdevicemap.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkfont.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkimage.h2m (SEE ALSO): Likewise.
* docs/man/grub-mklayout.h2m (SEE ALSO): Likewise.
* docs/man/grub-mknetdir.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkpasswd-pbkdf2.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkrelpath.h2m (SEE ALSO): Likewise.
* docs/man/grub-mkrescue.h2m (SEE ALSO): Likewise.
* docs/man/grub-ofpathname.h2m (SEE ALSO): Likewise.
* docs/man/grub-pe2elf.h2m (SEE ALSO): Likewise.
* docs/man/grub-probe.h2m (SEE ALSO): Likewise.
* docs/man/grub-reboot.h2m (SEE ALSO): Likewise.
* docs/man/grub-script-check.h2m (SEE ALSO): Likewise.
* docs/man/grub-set-default.h2m (SEE ALSO): Likewise.
* docs/man/grub-setup.h2m (SEE ALSO): Likewise.
(grub_find_root_device_from_mountinfo): Remove non-virtual-device
test that was incorrectly reintroduced in r3214.
Reported by: Ian Dall. Fixes Savannah bug #33133.
* grub-core/lib/i386/relocator16.S (grub_relocator16_start): Move
grub_relocator16_sp to %esp rather than %ss, and zero-extend it.
Fixes Ubuntu bug #683904.
New function.
(grub_util_biosdisk_close): Use grub_util_biosdisk_flush.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_flush): New proto.
* util/grub-setup.c (setup): Use grub_util_biosdisk_flush.
* grub-core/gfxmenu/widget-box.c (get_border_width): New function.
(grub_gfxmenu_create_box): Register get_border_width.
* grub-core/gfxmenu/gui_list.c (draw_menu): Use get_border_width
if available.
* include/grub/gfxwidgets.h (grub_gfxmenu_box): New member
get_border_width.
* grub-core/disk/raid.c (ascii2hex): New function.
(grub_raid_open): Accept mduuid/%s specification.
* grub-core/kern/emu/getroot.c (get_mdadm_name): Revamped into ...
(get_mdadm_uuid): ... this.
(grub_util_get_grub_dev): Use mduuid/%s if UUID is available.
move-mounts appearing out of order. Fixes Ubuntu bug #738345.
* grub-core/kern/emu/getroot.c (find_root_device_from_mountinfo):
Build a list of relevant visible mounts using the mnt_id and
parent_mnt_id fields, and then scan that list at the end.
even more important testing by Colin.
* Makefile.util.def (libgrubmods.a): Add crc.c and gzio.c
* grub-core/Makefile.core.def (btrfs): Add crc.c.
* grub-core/fs/btrfs.c: Stub replaced with real implementation.
* grub-core/io/gzio.c (grub_gzio): New fields mem_input_size,
mem_input_off and mem_input. All users updated to accept in-RAM input.
(gzio_seek): New function.
(test_zlib_header): Likewise.
(grub_gzio_read): Likewise.
(grub_zlib_decompress): Likewise.
* grub-core/kern/emu/getroot.c (grub_find_root_device_from_mountinfo):
Accept partial and non-virtual mounts.
(grub_guess_root_device): Do rescanning after device_from_mountinfo to
avoid receiving /dev/dm-X as device.
* grub-core/kern/emu/misc.c (grub_make_system_path_relative_to_its_root):
Handle bind and partial mounts.
* grub-core/lib/crc.c: New file.
* include/grub/deflate.h: Likewise.
* include/grub/emu/misc.h (grub_find_root_device_from_mountinfo): New
proto.
* include/grub/lib/crc.h: New file.
* grub-core/normal/menu_entry.c (per_term_screen): New member
num_entries.
(print_down): Use num_entries.
(update_screen): Likewise.
(grub_menu_entry_run): Set num_entries.
* grub-core/normal/menu_text.c (menu_viewer_data): New member
num_entries.
(grub_print_message_indented): Move real part to ...
(grub_print_message_indented_real): ... here. Additional argument
dry_run.
(draw_border): Additional argument num_entries.
(print_message): Additional argument dry_run.
(print_entries): Receive menu viewer data.
(grub_menu_init_page): New argment num_entries.
(menu_text_set_chosen_entry): Use num_entries.
(grub_menu_try_text): Likewise.
* grub-core/normal/term.c (print_ucs4_terminal): New argument dry_run.
All users updated.
(grub_ucs4_count_lines): New function.
* include/grub/term.h (grub_term_cursor_x): Moved from here ..
* grub-core/normal/menu_text.c (grub_term_cursor_x): ... to here.
* include/grub/term.h (GRUB_TERM_MESSAGE_HEIGHT): Removed.
(grub_term_border_height): Likewise.
(grub_term_num_entries): Likewise.
build system.
(Getting started): GRUB is developed in Bazaar now, not Subversion.
(Comment): Fix typo.
(Getting started): General copy-editing.
(Typical Development Experience): Likewise.
(Error Handling): Likewise.
(Video API): Likewise.
const.
* util/grub-setup.c (main): Reuse md device name if available.
* util/raid.c (grub_util_raid_getmembers): Receive device name and
not GRUB name as argument.
Based on patch by: Florian Wagner <fwagner>.
* grub-core/gfxmenu/gfxmenu.c (grub_gfxmenu_try): Move the call to
grub_gfxterm_fullscreen on error paths to ...
* grub-core/normal/menu.c (menu_init): ...here. Wait after showing
theme loading error.
configurations like pvmove. Previously code assumed that in some places
only lvs or only pvs are used whereas it seems that they are used
interchangeably.
* grub-core/disk/lvm.c (read_node): New function.
(read_lv): Use read_node.
(grub_lvm_scan_device): Use only first mirror on pvmove'd lvs.
Match volumes only at the end when all lvs are found. Take both
pvs (first) and lvs (second) into account.
* include/grub/lvm.h (grub_lvm_segment): Merge fields stripe_* and
mirror_* into node_*. All users updated.
(grub_lvm_stripe): Merge this ...
(grub_lvm_mirror): ... and this ...
(grub_lvm_node): ... into this. All users updated.
contributions by the various authors with active copyright assignment.
* docs/Makefile.am (info_TEXINFOS): Add grub-dev.texi.
* docs/font_char_metrics.png: New file.
* docs/font_char_metrics.txt: Likewise.
* docs/grub-dev.texi: Likewise.
* docs/grub.texi (Internals): Move from here ...
* docs/grub-dev.texi: ... here.
rather than the file it points to. This fixes use of freed memory
if an existing loopback device is replaced.
* grub-core/disk/loopback.c (grub_loopback_open): Store dev in
disk->data, not dev->file.
(grub_loopback_read): Adjust file assignment to match.
Fixes Ubuntu bug #742967.
memory corruptions.
* grub-core/fs/jfs.c (struct grub_jfs_diropen): Interpret bytes as
unsigned.
(grub_jfs_lookup_symlink): Make ino a grub_uint32_t rather than int.
(grub_jfs_blkno): Use 64-bit quantities for block sectors.
(grub_jfs_read_inode): Likewise.
(grub_jfs_opendir): Likewise. Remove now useless casts.
(grub_jfs_getent): Likewise.
Make ino a grub_uint32_t rather than int.
(grub_jfs_mount): Ensure that blksize and log2_blksize are consistent.
(grub_jfs_read_file): Use 64-bit quantities when necessary. Replace
division and module with bit operations.
(grub_jfs_find_file): Make ino a grub_uint32_t.
(grub_jfs_lookup_symlink): Likewise. Use 64-bit quantities
warning. (This was in fact always initialised before use, but GCC
wasn't smart enough to prove that.)
* grub-core/script/lexer.c (grub_script_lexer_yywrap): Likewise.
(Changes from GRUB Legacy): Link to "Environment block" section for
details of limitations.
(Simple configuration): Likewise. Link to documentation of gfxmode
and gfxpayload variables from GRUB_GFXMODE and GRUB_GFXPAYLOAD
respectively.
(Shell-like scripting): Note that normal variables are stored in the
environment.
(gettext): Link to documentation of lang and locale_dir.
(list_env): New section.
(load_env): New section.
(save_env): New section.
(Reporting bugs): Fix typo.
(grub_lvm_segment): New fields 'type', 'mirror_count' and 'mirrors'.
(grub_lvm_mirror): New struct.
* grub-core/disk/lvm.c (grub_lvm_checkvalue): Commented out.
(grub_lvm_iterate): Iterate only visible volumes.
(grub_lvm_read): Factor out to ..
(read_lv): ... this. Support mirrors.
(grub_lvm_read): New wrapper function.
(grub_lvm_scan_device): Parse mirrors. Skip everything that isn't
stripped or mirrored.
[!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Avoid grub_dprintf since not all
terminals are capabple of malloc-free operation.
(allocate_inreg) [!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Likewise.
(malloc_in_range) [!DEBUG_RELOCATOR_NOMEM_DPRINTF]: Likewise.
is disabled, even if no partition table is found.
Otherwise, the BIOS on Dell Latitude E series laptops will freeze
during POST if an invalid partition table is contained in the PBR
of the active partition when GRUB is installed to a partition.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS.
* grub-core/kern/ieee1275/mmap.c (grub_machine_mmap_iterate): Ignore
adress_cells and size:cells if GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS
is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS on powermacs.
empty, since in that case we can only generate either nothing or a
syntactically invalid configuration file.
Reported by: Michal Suchanek. Fixes Debian bug #612898.
* conf/Makefile.common (STRIPFLAGS_KERNEL): Add -F elf32-i386 and
-R .drectve on cygwin.
* conf/i386-pc-cygwin-img-ld.sc: Merge rdata and pdata into data.
* configure.ac: Use $(top_builddir) in TARGET_OBJ2ELF.
(COND_CYGWIN): New condition.
* grub-core/Makefile.am (%.mod): Set TARGET_OBJ2ELF.
* grub-core/genmod.sh.in: Use ${TARGET_OBJ2ELF} and
not @TARGET_OBJ2ELF@.
* util/grub-pe2elf.c (write_symbol_table): Use pe_symtab->type and not
type to determine whether aux is to be used.
* grub-core/loader/i386/linux.c (grub_linux_setup_video): Use
grub_video_get_driver_id and variable gfxpayloadforcelfb to
fill have_vga.
(grub_linux_boot): Rely on grub_linux_setup_video to fill have_vga and
shift params->lfb_size.
* include/grub/i386/linux.h: Make an enume out of have_vga values.
* grub-core/normal/menu.c (grub_menu_execute_entry): New parameter
auto_boot. All users updated.
Declared static.
Handle chosen and default with submenus.
(grub_menu_execute_with_fallback): Declared static.
Don't notify failure if autobooted. Upper level does it.
(menuentry_eq): New function.
(get_entry_number): Use menuentry_eq.
(show_menu): New parameter "autobooted". All users updated.
(grub_show_menu): Likewise.
* include/grub/normal.h (grub_show_menu): Likewise.
* include/grub/menu.h (grub_menu_execute_entry): Removed.
(grub_menu_execute_with_fallback): Likewise.
(grub_machine_init): Don't check amount of low memory as reportedly
INT 12h can be broken and if low memory is too low we wouldn't have
gotten into grub_machine_init anyway.
move the cursor to (0,0).
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_init_output):
Call grub_terminfo_output_init.
* grub-core/term/serial.c (grub_serial_term_output): Set .init.
* grub-core/term/terminfo.c (grub_terminfo_output_init): New function.
* include/grub/terminfo.h (grub_terminfo_output_init): New declaration.
* grub-core/kern/i386/pc/startup.S: Remove 0-data check.
* grub-core/lib/reed_solomon.c (decode_block): Do not proceed on 0 data
or 0 redundancy.
(grub_reed_solomon_add_redundancy): Do not proceed with 0 redundancy.
(grub_reed_solomon_recover): Likewise.
* grub-core/loader/i386/bsd.c (freebsd_bootdev): New variable.
(freebsd_biosdev): Likewise.
(grub_freebsd_boot): Use freebsd_bootdev and freebsd_biosdev.
(grub_cmd_freebsd): Set freebsd_bootdev and freebsd_biosdev.
used e.g. for initrd or modules. Moreover gzip handling of not
easily seekable files is buggy. Disable unknown file size for now. May
be inefficient but works.
* grub-core/io/gzio.c (test_header): Always retrieve the file size.
* grub-core/io/xzio.c (grub_xzio_open): Likewise.
previous patch increased the size of the RS code by 20 bytes (at
least with gcc-4.4), so increase this by 20 bytes to match.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): Likewise.
scratch area. Make sure to initialise chosen in standalone mode as
well as non-standalone.
Reported by: Robert Hooker and Andy Whitcroft.
Tested by: Andy Whitcroft.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* grub-core/loader/i386/bsd.c
(grub_cmd_freebsd_loadenv, grub_cmd_freebsd_module_elf): Check
whether kernel is loaded using grub_loader_is_loaded(), rather
than `kernel_type', which may still be `KERNEL_TYPE_NONE' under
certain error conditions.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
Remove byte-swapping function calls, which are not valid in
structure initialisers.
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot): Make
non-const.
(GRUB_MOD_INIT): Byte-swap data1, data2, and data3 fields of
grub_gpt_partition_type_bios_boot.
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: ifdef-ed out
(now unused).
(grub_keyboard_controller_init)
[GRUB_MACHINE_MIPS_YEELOONG || GRUB_MACHINE_QEMU]: Don't attempt to
read the initial state since controller isn't inited yet.
* grub-core/fs/udf.c (GRUB_UDF_LOG2_BLKSIZE): Removed.
(GRUB_UDF_BLKSZ): Removed.
(struct grub_udf_data): New field "lbshift" to hold the logical block
size of the file system in log2 format. All users updated.
(sblocklist): Change type to unsigned.
(grub_udf_mount): Change type of "sblklist" to unsigned.
Move AVDP search before VRS recognition, because the latter requires
knowledge of the logical block size, which is detected during the
former.
Detect and validate logical block size during AVDP search, adding
support for block sizes 512, 1024 and 4096.
Make VRS recognition independent of block size.
* include/grub/elfload.h (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* kern/elf.c (grub_elf32_size): New parameter. All users updated.
Return maximum segments alignment.
(grub_elf64_size): Likewise.
* grub-core/loader/powerpc/ieee1275/linux.c:
(grub_linux_claimmap_iterate): New function. Uses the "available"property
in the "memory" node for memory allocation for kernel in the PowerPC loader.
(grub_linux_load32): Correctly find linux entry point offset.
(grub_linux_load64): Likewise.
On mips-yeeloong, build with -march=loongson2f when this flag is
available (GCC >= 4.4).
* conf/Makefile.common [COND_mips_yeeloong] (CFLAGS_PLATFORM): Remove
`-march=mips3'.
* configure.ac: For mips-yeeloong, add -march=loongson2f if available,
or otherwise add -march=mips3.
Reported by: Jordan Uggla
* grub-core/term/serial.c (grub_serial_terminfo_input_template): New
const.
(grub_serial_terminfo_output_template): Likewise.
(grub_cmd_serial): Register "serial" with terminfo.
(GRUB_MOD_INIT(serial)): Fill grub_serial_terminfo_input and
grub_serial_terminfo_output.
On Yeeloong, pass machine type information to Linux.
* grub-core/loader/mips/linux.c [GRUB_MACHINE_MIPS_YEELOONG]
(LOONGSON_MACHTYPE): New macro, set to
"machtype=lemote-yeeloong-2f-8.9inches".
[LOONGSON_MACHTYPE] (grub_cmd_linux): Pass LOONGSON_MACHTYPE as
additional argument to Linux.
* util/deviceiter.c (grub_util_iterate_devices): Increase SCSI
limit to 48 (to cope with Sun Fire X4500), and IDE limit to 96
(its SATA disks are detected as slaveless IDE master drives on
kFreeBSD).
Reported by Carsten Aulbert.
elements with invlid index.
* grub-core/disk/mdraid_linux.c (grub_mdraid_detect): Likewise.
* grub-core/disk/raid.c (insert_array): Automatically reallocate
members.
* include/grub/raid.h (grub_raid_member): New struct.
(grub_raid_array): Transform devices and start_sector into usage of
grub_raid_member. All users updated
(allocated_devs): New member.
* Makefile.util.def (libgrubkern.a): New library for grub kernel
components that depend on gnulib headers.
(libgrubmods.a): Renamed from earlier libgrub.a.
* conf/Makefile.common: Remove gnulib from *_LIBRARY flags.
(arguments): New member allow_floppy.
(argp_parser): Handle --allow-floppy.
(main): Pass allow_floppy.
* util/grub-install.in: New option --allow-floppy passed though to
grub-setup.
* grub-core/commands/acpihalt.c [GRUB_DSDT_TEST]: Include userspace
headers and add relevant defines. Don't include standard headers.
(main) [GRUB_DSDT_TEST]: New function.
* include/grub/acpi.h [GRUB_DSDT_TEST]: Don't include standard headers.
Don't declare functions.
* util/grub-mkconfig.in: Merge `GRUB_DISABLE_LINUX_RECOVERY' and
`GRUB_DISABLE_NETBSD_RECOVERY' into a single `GRUB_DISABLE_RECOVERY'
variable. All references updated.
* util/grub.d/10_kfreebsd.in: Support recovery boot entries.
* grub-core/disk/raid.c (grub_raid_getname) [GRUB_UTIL]: New function.
(insert_array): New argument raid.
* include/grub/disk.h (grub_disk_dev) [GRUB_UTIL]: New member raidname.
* include/grub/raid.h (grub_raid_array) [GRUB_UTIL]: New member driver.
* util/grub-probe.c (probe): PRint raidname instead of plainly "mdraid".
Tested by: decoder
Reported by: decoder and meta tech.
* grub-core/term/efi/console.c (grub_console_standard_color): Removed.
(grub_console_setcolorstate): Clear out 0x80 bit.
Use GRUB_TERM_DEFAULT_STANDARD_COLOR.
(grub_console_output): Use GRUB_TERM_DEFAULT_NORMAL_COLOR.
Use GRUB_TERM_DEFAULT_HIGHLIGHT_COLOR.
* gentpl.py: New groups terminfoinkernel and terminfomodule.
* grub-core/Makefile.am (KERNEL_HEADER_FILES): Include extcmd.h, arg.h
and terminfo.h when needed.
* grub-core/Makefile.core.def (kernel): Include term/terminfo.c,
term/tparm.c, commands/extcmd.c, lib/arg.c on terminfokernel.
(terminfo): Enable only on terminfokernel.
(extcmd): Likewise.
* include/grub/extcmd.h: Add missing EXPORT_FUNC.
* include/grub/lib/arg.h: Likewise.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_dimensions): Fix
incorrect usage of ->.
* grub-core/loader/i386/multiboot_mbi.c (grub_multiboot_get_mbi_size):
Take VBE info into account even if only text is supported.
(fill_vbe_info): Take into account the case when only VGA text
is supported.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_VBE): Set to zero
on coreboot, multiboot and qemu.
* Makefile.util.def (grub-setup): Add grub-core/lib/reed_solomon.c.
* grub-core/Makefile.am (rs_decoder.S): New target.
(kern/i386/pc/startup.S): Depend on rs_decoder.S.
* grub-core/kern/i386/pc/startup.S (reed_solomon_redundancy): New field.
(multiboot): Move to RS part.
(post_reed_solomon): New label.
(grub_boot_drive): Move to non-RS part since it's modified in memory
on boot.
Include rs_decoder.S.
* grub-core/lib/reed_solomon.c: New file.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY):
New definition.
(GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE): Removed.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Updated.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): New definition.
* include/grub/partition.h (grub_partition_map): Change prototype of
embed to allow returning additional sectors.
* include/grub/reed_solomon.h: New file.
* util/grub-setup.c (setup): Handle Reed-Solomon.
Support degraded ZFS arrays in "grub-probe -t device" resolution.
* grub-core/kern/emu/getroot.c (find_root_device_from_libzfs): When
the pool is an array of devices, iterate through it and return the
first device that passes a stat() test (instead of blindly returning
the first one).
Build fixes for GNU/kFreeBSD.
* Makefile.util.def: Add `$(LIBZFS) $(LIBNVPAIR)' library dependencies
to programs that require ZFS conversion.
* grub-core/kern/emu/hostdisk.c (grub_util_biosdisk_is_floppy): Support
kernels that don't have FLOPPY_MAJOR.
* autogen.sh: Create symlinks to ${GRUB_CONTRIB} if necessary to
avoid confusing Automake. Run autogen only twice, once for the top
level and once for grub-core. Add Makefile.util.def and
Makefile.core.def from extra modules to the appropriate autogen
invocations. If Makefile.common exists in an extra module, include
it in both Makefile.util.am and grub-core/Makefile.core.am;
similarly, include any Makefile.util.common file in Makefile.util.am
and any Makefile.core.common file in grub-core/Makefile.core.am.
* conf/Makefile.common ($(top_srcdir)/grub-core/Makefile.core.am):
Depend on $(top_srcdir)/grub-core/Makefile.gcry.def.
($(top_srcdir)/grub-core/Makefile.gcry.def): Remove.
* grub-core/Makefile.am: Remove inclusion of Makefile.gcry.am.
* gentpl.py (gvar_add): Turn GVARS into a set.
(global_variable_initializers): Sort global variables on output.
(vars_init): New function.
(first_time): Likewise.
(library): Ensure that non-global variable initialisations are
emitted before the first time we emit code for a library block.
Append to variables rather than setting them. Only emit
noinst_LIBRARIES, BUILT_SOURCES, and CLEANFILES the first time for
each conditional path.
(program): installdir() emits an Autogen macro, so must be passed to
var_add rather than gvar_add.
(data): Likewise.
(script): Likewise.
(rules): New function, centralising handling for different target
types. Set up Guile association lists for first_time and vars_init,
and send most output to a diversion so that variable initialisations
can be emitted first.
(module_rules): Use new rules function.
(kernel_rules): Likewise.
(image_rules): Likewise.
(library_rules): Likewise.
(program_rules): Likewise.
(script_rules): Likewise.
(data_rules): Likewise.
* configure.ac: Add AC_PROG_LN_S, for the benefit of ntldr-img.
* .bzrignore: Add contrib and grub-core/contrib. Remove
grub-core/Makefile.gcry.am.
* grub-core/loader/multiboot_mbi2.c (grub_multiboot_load): Declare
new tags as supported.
(acpiv2_size): New function.
(grub_multiboot_get_mbi_size): Take new tags into account.
(grub_multiboot_make_mbi): Add new tags.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_ACPI): New definition.
convert partition names to disk names if the new `convert' parameter
is set.
(grub_util_biosdisk_get_grub_dev): If opening the disk device
returns GRUB_ERR_UNKNOWN_DEVICE, treat the partition device as a
disk in its own right. This can happen with Xen disk images.
* grub-core/commands/menuentry.c (grub_normal_add_menu_entry): New
parameter submenu. All users updated.
* grub-core/normal/main.c (free_menu): Rename to ...
(grub_normal_free_menu): ... this. Made global.
* grub-core/normal/menu.c (grub_menu_execute_entry): Open new context
if requested.
* grub-core/normal/menu_entry.c (screen): New field submenu.
(make_screen): Set submenu.
(run): Open new context if requested.
* include/grub/menu.h (grub_menu_entry): New field submenu.
* include/grub/normal.h (grub_normal_free_menu): New proto.
* Makefile.util.def (libgrub.a): Add grub-core/partmap/bsdlabel.c.
* grub-core/disk/efi/efidisk.c (grub_efidisk_get_device_name):
Properly handle concatenation.
* grub-core/kern/device.c (grub_device_iterate): Likewise.
* grub-core/normal/completion.c (iterate_partition): Likewise.
* grub-core/kern/disk.c (grub_disk_open): Make disk->name not
contain partition. All users updated.
* grub-core/partmap/bsdlabel.c (grub_netbsdlabel_partition_map): New
struct.
(grub_openbsdlabel_partition_map): Likewise.
(bsdlabel_partition_map_iterate): Rename to ..
(iterate_real): ... this. New arguments sector, freebsd and pmap.
(bsdlabel_partition_map_iterate): New function.
(netopenbsdlabel_partition_map_iterate): Likewise.
(netbsdlabel_partition_map_iterate): Likewise.
(openbsdlabel_partition_map_iterate): Likewise.
(GRUB_MOD_INIT): Register new partmaps.
(GRUB_MOD_FINI): Unregister new partmaps.
* grub-core/partmap/msdos.c (pc_partition_map_iterate): Rename to ...
(grub_partition_msdos_iterate): ... this. All users updated.
Don't support embedding other than in a minix partition.
* include/grub/msdos_partition.h (grub_partition_msdos_iterate): New
proto.
* include/grub/partition.h (grub_partition): New field msdostype.
* util/grub-install.in: Handle openbsd and netbsd types being in
part_bsd module.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
* grub-core/Makefile.core.def (lsefimmap): New module.
* include/grub/efi/api.h (PRIxGRUB_EFI_UINTN_T): New definition.
Also-By: Robert Millan <rmh.grub@aybabtu.com>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
has a chance to see them.
* grub-core/kern/err.c (grub_err_printed_errors): New variable.
(grub_print_error): Increment grub_err_printed_errors.
* grub-core/normal/menu.c (grub_menu_execute_entry): Pause the
execution if any errors were displayed.
(show_menu): Remove old code for pause.
* grub-core/normal/menu_entry.c (run): Likewise.
* grub-core/normal/term.c (grub_normal_char_counter): Removed. All
users updated.
(grub_normal_get_char_counter): Likewise.
* include/grub/err.h (grub_err_printed_errors): New external variable.
* include/grub/normal.h (grub_normal_get_char_counter): Removed.
* grub-core/loader/i386/multiboot_mbi.c (grub_multiboot_get_mbi_size):
Take VBE info into account.
(fill_vbe_info) [GRUB_MACHINE_HAS_VBE]: New function.
(retrieve_video_parameters) [GRUB_MACHINE_HAS_VBE]:
Call fill_vbe_info when appropriate.
(grub_multiboot_make_mbi): Account for the size occupied by VBE info.
* grub-core/loader/multiboot_mbi2.c (grub_multiboot_load): Declare tags
as supported.
(grub_multiboot_get_mbi_size): Take new tags into account.
(fill_vbe_tag) [GRUB_MACHINE_HAS_VBE]: New function.
(retrieve_video_parameters) [GRUB_MACHINE_HAS_VBE]:
Call fill_vbe_tag when appropriate.
(grub_multiboot_make_mbi): Properly align tags.
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_pm_interface): New
function.
* include/grub/i386/pc/vbe.h (grub_vbe_bios_get_pm_interface): New
proto.
* include/grub/multiboot.h (GRUB_MACHINE_HAS_VBE): New definition.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_dimensions):
Save state in grub_ofconsole_terminfo_output.
(grub_ofconsole_term): Use grub_terminfo_getwh.
(grub_ofconsole_getwh): Removed.
* grub-core/term/serial.c (grub_serial_getwh): Removed.
(grub_serial_term): Use grub_terminfo_getwh.
* grub-core/term/terminfo.c (grub_terminfo_getwh): New function.
(options): New struct.
(OPTION_*): New enum.
(grub_cmd_terminfo): Transform into extcmd and handle new parameters.
* include/grub/terminfo.h (grub_terminfo_output_state): New fields
width and height.
(grub_terminfo_getwh): New proto.
* grub-core/lib/legacy_parse.c (grub_legacy_parse): Handle --lines.
* grub-core/lib/legacy_parse.c (legacy_command): New flags FLAG_TITLE
and FLAG_TERMINAL.
(legacy_commands): Add terminal and title.
(grub_legacy_parse): Handle terminal. Simplify title handling.
on FreeBSD. Define HAVE_DIOCGDINFO on NetBSD and FreeBSD to reduce
the verbosity of later #ifs.
(find_partition_start): Define this function on FreeBSD too.
(device_is_wholedisk) [__FreeBSD__ || __FreeBSD_kernel__]: New
function.
(grub_util_biosdisk_get_grub_dev): Use partition-start-sector logic
on FreeBSD.
* Add gnulib files generated by gnulib-tool in build-aux, m4 and
grub-core/gnulib directories
* .bzignore: Add **/.deps and autogenerated gnulib files
* configure.ac: Assign auxiliary directory to build-aux, add invocation
of gnulib macros, add grub-core/gnulib/Makefile
* Makefile.am: Add gnulib directory in SUBDIRS (removing unnecessary .),
include m4 directory to aclocal.
* Makefile.util.def: Remove direct compilation of gnulib source files
and use the new grub-core/gnulib/libgnu.a.
* build-aux/config.rpath: move config.rpath from top directory to
build-aux
* conf/Makefile.common: Remove the macro _GL_UNUSED already defined
in gnulib headers
* conf/Makefile.extra-dist: Add m4/gnulib-cache.m4
* grub-core/Makefile.core.def: Remove unnecessary extra_dist
* grub-core/lib/posix_wrap/localcharset.h (locale_charset): Update
header.
* grub-core/lib/posix_wrap/langinfo.h (nl_langinfo): Return static
string.
* Makefile.util.def (grub-mklayout): New file.
(grub-kbdcomp): New script.
* grub-core/Makefile.am (KERNEL_HEADER_FILES) [COND_mips_yeeloong]:
Add keyboard_layouts.h.
* grub-core/Makefile.core.def (kernel): Add commands/keylayouts.c and
commands/boot.c on yeeloong.
(keylayouts): New module.
* grub-core/bus/usb/ohci.c
* grub-core/bus/usb/uhci.c
* grub-core/bus/usb/usbhub.c (rescan): New variable.
(grub_usb_add_hub): Poll interrupt pipe for device handling.
(attach_root_port): Likewise.
(poll_nonroot_hub): Likewise.
(grub_usb_poll_devices): Likewise.
(detach_device): Close transfer.
* grub-core/bus/usb/usbtrans.c (grub_usb_execute_and_wait_transfer): New
function.
(grub_usb_bulk_setup_readwrite): Likewise.
(grub_usb_bulk_finish_readwrite): Likewise.
* grub-core/commands/keylayouts.c: New file.
* grub-core/commands/keystatus.c (grub_getkeystatus): New function.
* grub-core/commands/menuentry.c (hotkey_aliases): All several new
aliases.
* grub-core/term/at_keyboard.c: Restructured to use keylayouts and
support scancode 2.
* grub-core/term/usb_keyboard.c: Restructured to use keylayouts.
* include/grub/keyboard_layouts.h: New file.
* util/grub-mklayout.c: New file.
* util/grub-kbdcomp.in: Likewise.
Also-By: Aleš Nesrsta <starous@volny.cz>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
rules.
* grub-core/kern/emu/hostdisk.c (read_device_map): Don't
canonicalise device paths under /dev/mapper/.
(convert_system_partition_to_system_disk): Compare the
uncanonicalised path to /dev/mapper/ rather than the canonicalised
path, since device nodes under /dev/mapper/ are often symlinks.
needing to be compiled with serial support.
(ls): Indicate that multiple files are accepted.
* grub-core/commands/ls.c (GRUB_MOD_INIT): Update help text to
indicate that multiple files are accepted.
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot)
[GRUB_UTIL]: New variable.
(gpt_partition_map_iterate): Set part.parent.
(gpt_partition_map_embed) [GRUB_UTIL]: New function.
(grub_gpt_partition_map) [GRUB_UTIL]: Set .embed.
* grub-core/partmap/msdos.c (pc_partition_map_embed) [GRUB_UTIL]:
New function.
(grub_msdos_partition_map) [GRUB_UTIL]: Set .embed.
* include/grub/partition.h (grub_embed_type_t) [GRUB_UTIL]: New type.
(grub_partition_map) [GRUB_UTIL]: New field embed.
* util/grub-setup.c (grub_gpt_partition_type_bios_boot): Removed.
(setup): Use ->embed.
Reported by: Yves Blusseau.
* include/grub/command.h (grub_command_flags_t): New flags
GRUB_COMMAND_ACCEPT_DASH and GRUB_COMMAND_OPTIONS_AT_START.
* grub-core/lib/arg.c (grub_arg_parse): Handle new flags.
* grub-core/commands/echo.c (GRUB_MOD_INIT): Use new flags.
* util/sparc64/ieee1275/grub-setup.c: ... and this ...
* util/grub-setup.c: ... into this.
* include/grub/sparc64/ieee1275/boot.h (grub_boot_blocklist) [ASM_FILE]:
New struct.
* grub-core/fs/ext2.c (grub_ext2_open): Use return error value when
possible.
All users updated.
* disk/loopback.c (grub_loopback): Remove has_partitions.
All users updated.
(options): Remove partitions. All users updated.
* util/grub-fstest.c (fstest): Don't pass "-p" to loopback.
* util/i386/pc/grub-setup.c (setup): copy partition table only when
actual partition table is found.
* configure.ac (GRUB_KERNEL_MACHINE_LINK_ADDR): Removed.
* grub-core/Makefile.core.def (kernel): Make ldflags just use the
right address. Add sparc64_ieee1275_ldflags.
* grub-core/loader/sparc64/ieee1275/linux.c: Remove leftover include.
* util/grub-mkimagexx.c (locate_sections): Correct grub_host_to_target32
to grub_host_to_target_addr
(load_image): Likewise.
* grub-core/Makefile.core.def (vbeinfo): Removed.
(vbetest): Removed.
(videoinfo): New module.
* grub-core/commands/i386/pc/vbeinfo.c: Removed.
* grub-core/commands/i386/pc/vbetest.c: Removed.
* grub-core/commands/videoinfo.c: New file.
* grub-core/commands/videotest.c (grub_cmd_videotest): Support mode
specification.
(grub_cmd_videotest) [GRUB_MACHINE_PCBIOS]: Load vbe.mod when invoked
as vbetest.
(GRUB_MOD_INIT) [GRUB_MACHINE_PCBIOS]: New command vbetest.
(GRUB_MOD_FINI) [GRUB_MACHINE_PCBIOS]: Unregister vbetest.
* grub-core/video/efi_gop.c (grub_video_gop_fill_mode_info): Fill
mode_number. New parameter mode. All users updated.
(grub_video_gop_iterate): New function.
(grub_video_efi_gop): New member iterate.
* grub-core/video/i386/pc/vbe.c (framebuffer): Removed leftover fields.
(grub_vbe_set_video_mode): Remove setting useless fields.
(vbe2videoinfo): New function.
(grub_video_vbe_iterate): Likewise.
(grub_video_vbe_setup): Use vbe2videoinfo.
(grub_video_vbe_print_adapter_specific_info): New function.
(grub_video_vbe_adapter): New fields iterate and
print_adapter_specific_info.
* include/grub/video.h (GRUB_VIDEO_MODE_*): Transform into enum.
All users updated.
(grub_video_mode_info): New field mode_number.
(grub_video_adapter): New fields iterate and
print_adapter_specific_info.
* grub-core/kern/emu/getroot.c (grub_util_get_dev_abstraction):
Return GRUB_DEV_ABSTRACTION_NONE if device is in device.map.
* grub-core/kern/emu/hostdisk.c
(convert_system_partition_to_system_disk): Support mdX.
(find_system_device): New parameter add. All users updated.
(grub_util_biosdisk_is_present): New function.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_is_present): New
proto.
* grub-core/Makefile.core.def (halt): Add commands/acpihalt.c on i386-pc.
* grub-core/commands/acpihalt.c: New file.
* grub-core/commands/i386/pc/halt.c (grub_cmd_halt): Call grub_acpi_halt.
* include/grub/acpi.h (grub_acpi_fadt): New member pm1a.
(grub_acpi_halt): New proto.
(GRUB_ACPI_SLP_EN): New const.
(GRUB_ACPI_SLP_TYP_OFFSET): Likewise.
(GRUB_ACPI_OPCODE_*): New enum.
(GRUB_ACPI_EXTOPCODE_*): Likewise.
* grub-core/video/ieee1275.c (stdout_ihandle): New variable.
(have_setcolors): Likewise.
(grub_video_ieee1275_init): Fill stdout_ihandle and have_setcolors.
(grub_video_ieee1275_setup): Use grub_video_ieee1275_set_palette.
(grub_video_ieee1275_set_palette): Implement.
Set prefix_drive on EFI and PC to (,$grub_partition) as last resort.
* util/i386/pc/grub-setup.c (setup): Don't touch prefix.
Fixes a bug reported by Yves Blusseau.
* conf/Makefile.common (CFLAGS_PLATFORM): Add -mflush-func
=grub_cpu_flush_cache on all mips and not only yeeloong.
* configure.ac (COND_mips): New conditional.
* grub-core/Makefile.am (KERNEL_HEADER_FILES): Add libgcc on all
platforms.
* grub-core/kern/emu/cache.S (__mips__): Use _flush_cache.
* grub-core/kern/emu/full.c (grub_arch_dl_init_linker)
[GRUB_LINKER_HAVE_INIT]: New function.
(grub_emu_post_init): Likewise.
* grub-core/kern/emu/lite.c (grub_emu_post_init): Likewise.
* grub-core/kern/emu/main.c: Use grub_emu_post_init.
* include/grub/cache.h (_mips): Include mips/cache.h.
* include/grub/disk.h [GRUB_UTIL || GRUB_MACHINE_EMU]: Add missing
LVM and RAID prototypes.
* include/grub/emu/misc.h (grub_emu_post_init): New proto.
* include/grub/mips/time.h (grub_cpu_idle) [GRUB_MACHINE_EMU]: New
function.
Solaris support in grub_find_zpool_from_dir(). Thanks
Seth Goldberg for referring to getextmntent() facility.
* configure.ac: Check for getextmntent(), `sys/mnttab.h' and
`sys/mkdev.h'.
* grub-core/kern/emu/misc.c [HAVE_SYS_MNTTAB_H]: Include
`<sys/mnttab.h>'.
[HAVE_SYS_MKDEV_H]: Include `<sys/mkdev.h>'.
[HAVE_GETEXTMNTENT] (grub_find_zpool_from_dir): Add getextmntent()
method for finding zpool name.
actively require those modules to be absent, so grub-fstest needs
its own initialisation and finalisation code.
* Makefile.am (grub_fstest.pp): New target.
(grub_fstest_init.lst): Likewise.
(grub_fstest_init.c): Likewise.
* Makefile.util.def (grub-fstest): Add grub_fstest_init.c.
and grub-core/disk/host.c to ...
(grub-fstest): ... here. Having the host disk implementation
present confuses grub-probe and other utility programs.
* util/grub-mkconfig.in: Only verify readability of grub.cfg.new
when writing to a file, not when writing to stdout.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
