Support was implemented in commit c7cb11b21 (probe: Support probing for
msdos PARTUUID).
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Like grub_verifiers_open(), the grub_verify_string() should also
display this debug message, which is very helpful for debugging.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If an existing variable is set with a value whose length is smaller than
the current value, a memory corruption can happen due copying padding '#'
characters outside of the environment block buffer.
This is caused by a wrong calculation of the previous free space position
after moving backward the characters that followed the old variable value.
That position is calculated to fill the remaining of the buffer with the
padding '#' characters. But since isn't calculated correctly, it can lead
to copies outside of the buffer.
The issue can be reproduced by creating a variable with a large value and
then try to set a new value that is much smaller:
$ grub2-editenv --version
grub2-editenv (GRUB) 2.04
$ grub2-editenv env create
$ grub2-editenv env set a="$(for i in {1..500}; do var="b$var"; done; echo $var)"
$ wc -c env
1024 grubenv
$ grub2-editenv env set a="$(for i in {1..50}; do var="b$var"; done; echo $var)"
malloc(): corrupted top size
Aborted (core dumped)
$ wc -c env
0 grubenv
Reported-by: Renaud Métrich <rmetrich@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Remove all documentation of and mentions of the uppermem
command from the docs/grub.texi file.
The uppermem command is not implemented in the GRUB source
at all and appears to never have been implemented despite
former plans to add an uppermem command.
To reduce user confusion, this even removes the paragraph
describing how GRUB's uppermem command was supposed to
complement the Linux kernel's mem= parameter.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Remove the documentation of the pxe_unload command from the
docs/grub.texi file.
The pxe_unload command is not implemented in the grub source
at this time at all. It appears to have been removed in commit
671a78acb (cleanup pxe and efi network release).
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a few patterns to .gitignore to cover files which are generated
by building grub ("make", "make check", "make dist") but which have
been forgotten to add to .gitignore in the past.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Going through the list of gitignore patterns without a leading slash,
this adds a leading slash where it appears to have been forgotten.
Some gitignore patterns like ".deps/" or "Makefile" clearly should
match everywhere, so those definitively need no leading slash.
For some patterns like "ascii.bitmaps", it is unclear where in the
source tree they should match. Those patterns are kept as they are,
matching the patterns in the whole tree of subdirectories.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add trailing slashes for all patterns matching directories.
Note that we do *not* add trailing slashes for *symlinks*
to directories.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Alphabetically sort the two groups of gitignore patterns:
* The group of patterns without slashes, matching anywhere
in the directory subtree.
* The group of patterns with slashes, matching relative to the
.gitignore file's directory
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Group the .gitignore patterns into two groups:
* Pattern not including a slash, i.e. matching files anywhere in
the .gitignore file's directory and all of its subdirectories.
* Patterns including a slash, i.e. matching only relative to the
.gitignore file's directory.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
As all gitignore patterns containing a left or middle slash match
only relative to the .gitignore file's directory, we write them
all in the same manner with a leading slash.
This makes the file significantly easier to read.
Signed-off-by: Hans Ulrich Niedermann <hun@n-dimensional.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Lack of them causes random instructions to be executed before the
jump really happens.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When decrypting a given keyslot, all error cases except for one set up
an error and return the error code. The only exception is when we try to
read the area key: instead of setting up an error message, we directly
print it via grub_dprintf().
Convert the outlier to use grub_error() to allow more uniform handling
of errors.
Signed-off-by: Patrick Steinhardt <ps@kps.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With the upstream change having landed that adds a name to the
previously anonymous "jsmntok" typedef, we can now add a forward
declaration for that struct in our code. As a result, we no longer have
to store the "tokens" member of "struct grub_json" as a void pointer but
can instead use the forward declaration, allowing us to get rid of casts
of that field.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Update our embedded version of the jsmn library to upstream commit
053d3cd (Merge pull request #175 from pks-t/pks/struct-type,
2020-04-02).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The fwsetup command allows to reboot into the EFI firmware setup menu, add
a template to include a menu entry on EFI systems that makes use of that
command to reboot into the EFI firmware settings.
This is useful for users since the hotkey to enter into the EFI setup menu
may not be the same on all systems so users can use the menu entry without
needing to figure out what key needs to be pressed.
Also, if fastboot is enabled in the BIOS then often it is not possible to
enter the firmware setup menu. So the entry is again useful for this case.
Signed-off-by: Steve Langasek <steve.langasek@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On some devices the ESC key is the hotkey to enter the BIOS/EFI setup
screen, making it really hard to time pressing it right. Besides that
ESC is also pretty hard to discover for a user who does not know it
will unhide the menu.
This commit makes F4, which was chosen because is not used as a hotkey
to enter the BIOS setup by any vendor, also interrupt sleeps / stop the
menu countdown.
This solves the ESC gets into the BIOS setup and also somewhat solves
the discoverability issue, but leaves the timing issue unresolved.
This commit fixes the timing issue by also adding support for keeping
SHIFT pressed during boot to stop the menu countdown. This matches
what Ubuntu is doing, which should also help with discoverability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If we're running with a hidden menu we may never need text mode, so do not
change the video-mode to text until we actually need it.
This allows to boot a machine without unnecessary graphical transitions and
provide a seamless boot experience to users.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Implement getkeystatus() support in the EFI console driver.
This is needed because the logic to determine if a key was pressed to make
the menu countdown stop will be changed by a later patch to also take into
account the SHIFT key being held down.
For this reason the EFI console driver has to support getkeystatus() to
allow detecting that event.
Note that if a non-modifier key gets pressed and repeated calls to
getkeystatus() are made then it will return the modifier status at the
time of the non-modifier key, until that key-press gets consumed by a
getkey() call.
This is a side-effect of how the EFI simple-text-input protocol works
and cannot be avoided.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a preparatory patch for adding getkeystatus() support to the
EFI console driver.
We can get modifier status through the simple_text_input read_key_stroke()
method, but if a non-modifier key is (also) pressed the read_key_stroke()
call will consume that key from the firmware's queue.
The new grub_console_read_key_stroke() helper buffers upto 1 key-stroke.
If it has a non-modifier key buffered, it will return that one, if its
buffer is empty, it will fills its buffer by getting a new key-stroke.
If called with consume=1 it will empty its buffer after copying the
key-data to the callers buffer, this is how getkey() will use it.
If called with consume=0 it will keep the last key-stroke buffered, this
is how getkeystatus() will call it. This means that if a non-modifier
key gets pressed, repeated getkeystatus() calls will return the modifiers
of that key-press until it is consumed by a getkey() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move grub_getkeystatushelper() function from grub-core/commands/keystatus.c
to grub-core/kern/term.c and export it so that it can be used outside of
the keystatus command code too.
There's no logic change in this patch. The function definition is moved so
it can be called from grub-core/kern/term.c in a subsequent patch. It will
be used to determine if a SHIFT key has was held down and use that also to
interrupt the countdown, without the need to press a key at the right time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is just a preparatory patch to move the functions higher in the file,
since these will be called by the grub_prepare_for_text_output() function
that will be introduced in a later patch.
The logic is unchanged by this patch. Functions definitions are just moved
to avoid a forward declaration in a later patch, keeping the code clean.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, an image generated with 'grub-mkimage -n' causes an error when
read with 'readelf -a':
Displaying notes found at file offset 0x000106f0 with length 0x0000002c:
Owner Data size Description
readelf: Warning: note with invalid namesz and/or descsz found at offset 0x0
readelf: Warning: type: 0x1275, namesize: 0x00000008, descsize: 0x0000002c, alignment: 4
This is because the descsz of the CHRP note is set to
sizeof (struct grub_ieee1275_note)
which is the size of the entire note, including name and elf header. The
desczs should contain only the contents, not the name and header sizes.
Set the descsz instead to 'sizeof (struct grub_ieee1275_note_desc)'
Resultant readelf output:
Displaying notes found at file offset 0x00010710 with length 0x0000002c:
Owner Data size Description
PowerPC 0x00000018 Unknown note type: (0x00001275)
description data: ff ff ff ff 00 c0 00 00 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 40 00
So far as I can tell this issue has existed for as long as the note
generation code has existed, but I guess nothing really checks descsz.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We bumped into the build error while testing gcc-10 pre-release.
In file included from ../../include/grub/file.h:22,
from ../../grub-core/fs/zfs/zfs.c:34:
../../grub-core/fs/zfs/zfs.c: In function 'zap_leaf_lookup':
../../grub-core/fs/zfs/zfs.c:2263:44: error: array subscript '<unknown>' is outside the bounds of an interior zero-length array 'grub_uint16_t[0]' {aka 'short unsigned int[0]'} [-Werror=zero-length-bounds]
2263 | for (chunk = grub_zfs_to_cpu16 (l->l_hash[LEAF_HASH (blksft, h, l)], endian);
../../include/grub/types.h:241:48: note: in definition of macro 'grub_le_to_cpu16'
241 | # define grub_le_to_cpu16(x) ((grub_uint16_t) (x))
| ^
../../grub-core/fs/zfs/zfs.c:2263:16: note: in expansion of macro 'grub_zfs_to_cpu16'
2263 | for (chunk = grub_zfs_to_cpu16 (l->l_hash[LEAF_HASH (blksft, h, l)], endian);
| ^~~~~~~~~~~~~~~~~
In file included from ../../grub-core/fs/zfs/zfs.c:48:
../../include/grub/zfs/zap_leaf.h:72:16: note: while referencing 'l_hash'
72 | grub_uint16_t l_hash[0];
| ^~~~~~
Here I'd like to quote from the gcc document [1] which seems best to
explain what is going on here.
"Although the size of a zero-length array is zero, an array member of
this kind may increase the size of the enclosing type as a result of
tail padding. The offset of a zero-length array member from the
beginning of the enclosing structure is the same as the offset of an
array with one or more elements of the same type. The alignment of a
zero-length array is the same as the alignment of its elements.
Declaring zero-length arrays in other contexts, including as interior
members of structure objects or as non-member objects, is discouraged.
Accessing elements of zero-length arrays declared in such contexts is
undefined and may be diagnosed."
The l_hash[0] is apparnetly an interior member to the enclosed structure
while l_entries[0] is the trailing member. And the offending code tries
to access members in l_hash[0] array that triggers the diagnose.
Given that the l_entries[0] is used to get proper alignment to access
leaf chunks, we can accomplish the same thing through the ALIGN_UP macro
thus eliminating l_entries[0] from the structure. In this way we can
pacify the warning as l_hash[0] now becomes the last member to the
enclosed structure.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We bumped into the build error while testing gcc-10 pre-release.
../../grub-core/disk/mdraid1x_linux.c: In function 'grub_mdraid_detect':
../../grub-core/disk/mdraid1x_linux.c:181:15: error: array subscript <unknown> is outside array bounds of 'grub_uint16_t[0]' {aka 'short unsigned int[0]'} [-Werror=array-bounds]
181 | (char *) &sb.dev_roles[grub_le_to_cpu32 (sb.dev_number)]
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../grub-core/disk/mdraid1x_linux.c:98:17: note: while referencing 'dev_roles'
98 | grub_uint16_t dev_roles[0]; /* Role in array, or 0xffff for a spare, or 0xfffe for faulty. */
| ^~~~~~~~~
../../grub-core/disk/mdraid1x_linux.c:127:33: note: defined here 'sb'
127 | struct grub_raid_super_1x sb;
| ^~
cc1: all warnings being treated as errors
Apparently gcc issues the warning when trying to access sb.dev_roles
array's member, since it is a zero length array as the last element of
struct grub_raid_super_1x that is allocated sparsely without extra
chunks for the trailing bits, so the warning looks legitimate in this
regard.
As the whole thing here is doing offset computation, it is undue to use
syntax that would imply array member access then take address from it
later. Instead we could accomplish the same thing through basic array
pointer arithmetic to pacify the warning.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With recent versions of gcc on Ubuntu a very large lzma_decompress.img file is
output. (e.g. 134479600 bytes instead of 2864.) This causes grub-mkimage to
fail with: "error: Decompressor is too big."
This seems to be caused by a section .note.gnu.property that is placed at an
offset such that objcopy needs to pad the img file with zeros.
This issue is present on:
Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
This issue is not present on:
Ubuntu 19.10 with gcc (Ubuntu 7.5.0-3ubuntu1~19.10) 7.5.0
RHEL 8.0 with gcc 8.3.1 20190507 (Red Hat 8.3.1-4)
The issue can be fixed by removing the section using objcopy as shown in
this patch.
Signed-off-by: Simon Hardy <simon.hardy@itdev.co.uk>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The memory requested for the event is not released here,
causing memory leaks. This patch fixes this problem.
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add notes on LVM cache booting to the GRUB manual to help user understanding
the outstanding issue and status.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The LVM cache logical volume is the logical volume consisting of the original
and the cache pool logical volume. The original is usually on a larger and
slower storage device while the cache pool is on a smaller and faster one. The
performance of the original volume can be improved by storing the frequently
used data on the cache pool to utilize the greater performance of faster
device.
The default cache mode "writethrough" ensures that any data written will be
stored both in the cache and on the origin LV, therefore grub can be straight
to read the original lv as no data loss is guarenteed.
The second cache mode is "writeback", which delays writing from the cache pool
back to the origin LV to have increased performance. The drawback is potential
data loss if losing the associated cache device.
During the boot time grub reads the LVM offline i.e. LVM volumes are not
activated and mounted, hence it should be fine to read directly from original
lv since all cached data should have been flushed back in the process of taking
it offline.
It is also not much helpful to the situation by adding fsync calls to the
install code. The fsync did not force to write back dirty cache to the original
device and rather it would update associated cache metadata to complete the
write transaction with the cache device. IOW the writes to cached blocks still
go only to the cache device.
To write back dirty cache, as LVM cache did not support dirty cache flush per
block range, there'no way to do it for file. On the other hand the "cleaner"
policy is implemented and can be used to write back "all" dirty blocks in a
cache, which effectively drain all dirty cache gradually to attain and last in
the "clean" state, which can be useful for shrinking or decommissioning a
cache. The result and effect is not what we are looking for here.
In conclusion, as it seems no way to enforce file writes to the original
device, grub may suffer from power failure as it cannot assemble the cache
device and read the dirty data from it. However since the case is only
applicable to writeback mode which is sensitive to data lost in nature, I'd
still like to propose my (relatively simple) patch and treat reading dirty
cache as improvement.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When building GRUB with memory management debugging enabled, then the
build fails because of `grub_debug_malloc()` and `grub_debug_free()`
being undefined in the luks2 module. The cause is that we patch
"base64.h" to unconditionaly include "config-util.h", which shouldn't be
included for modules at all. As a result, `MM_DEBUG` is defined when
building the module, causing it to use the debug memory allocation
functions. As these are not built into modules, we end up with a linker
error.
Fix the issue by removing the <config-util.h> include altogether. The
sole reason it was included was for the `_GL_ATTRIBUTE_CONST` macro,
which we can simply define as empty in case it's not set.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The memory management system supports a debug mode that can be enabled
at build time by passing "--enable-mm-debug" to the configure script.
Passing the option will cause us define MM_DEBUG as expected, but in
fact the reverse option "--disable-mm-debug" will do the exact same
thing and also set up the define. This currently causes the build of
"lib/gnulib/base64.c" to fail as it tries to use `grub_debug_malloc()`
and `grub_debug_free()` even though both symbols aren't defined.
Seemingly, `AC_ARG_ENABLE()` will always execute the third argument if
either the positive or negative option was passed. Let's thus fix the
issue by moving the call to`AC_DEFINE()` into an explicit `if test
$xenable_mm_debug` block, similar to how other defines work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
This allows comparing file ages on EFI system partitions.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This provides the node's attributes outside the iterator function
so the file modification time can be accessed and reported.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fixes a build failure:
grub-core/commands/date.c:49: undefined reference to `grub_get_weekday_name'
grub-core/commands/ls.c:155: undefined reference to `grub_unixtime2datetime'
Bug: https://bugs.gentoo.org/711512
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While GRUB has no platform support for SuperH (sh4) yet, this change
adds the target-specific handling of soft-floats such that the GRUB
utilities can be built on this target.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, in some builds with some checkers, we see:
1. grub-core/disk/efi/efidisk.c:601: error[shiftTooManyBitsSigned]: Shifting signed 64-bit value by 63 bits is undefined behaviour
This is because grub_efi_status_t is defined as grub_efi_intn_t, which is
signed, and shifting into the sign bit is not defined behavior. UEFI fixed
this in the spec in 2.3:
2.3 | Change the defined type of EFI_STATUS from INTN to UINTN | May 7, 2009
And the current EDK2 code has:
MdePkg/Include/Base.h-//
MdePkg/Include/Base.h-// Status codes common to all execution phases
MdePkg/Include/Base.h-//
MdePkg/Include/Base.h:typedef UINTN RETURN_STATUS;
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-/**
MdePkg/Include/Base.h- Produces a RETURN_STATUS code with the highest bit set.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @param StatusCode The status code value to convert into a warning code.
MdePkg/Include/Base.h- StatusCode must be in the range 0x00000000..0x7FFFFFFF.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @return The value specified by StatusCode with the highest bit set.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-**/
MdePkg/Include/Base.h-#define ENCODE_ERROR(StatusCode) ((RETURN_STATUS)(MAX_BIT | (StatusCode)))
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-/**
MdePkg/Include/Base.h- Produces a RETURN_STATUS code with the highest bit clear.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @param StatusCode The status code value to convert into a warning code.
MdePkg/Include/Base.h- StatusCode must be in the range 0x00000000..0x7FFFFFFF.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @return The value specified by StatusCode with the highest bit clear.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-**/
MdePkg/Include/Base.h-#define ENCODE_WARNING(StatusCode) ((RETURN_STATUS)(StatusCode))
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-/**
MdePkg/Include/Base.h- Returns TRUE if a specified RETURN_STATUS code is an error code.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- This function returns TRUE if StatusCode has the high bit set. Otherwise, FALSE is returned.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @param StatusCode The status code value to evaluate.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h- @retval TRUE The high bit of StatusCode is set.
MdePkg/Include/Base.h- @retval FALSE The high bit of StatusCode is clear.
MdePkg/Include/Base.h-
MdePkg/Include/Base.h-**/
MdePkg/Include/Base.h-#define RETURN_ERROR(StatusCode) (((INTN)(RETURN_STATUS)(StatusCode)) < 0)
...
Uefi/UefiBaseType.h:typedef RETURN_STATUS EFI_STATUS;
This patch makes grub's implementation match the Edk2 declaration with regards
to the signedness of the type.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add debug information to EFI GOP video driver probing function.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
All other video drivers use "video" as the debug condition instead of "fb"
so change this in the efi/uga driver to make it consistent with the others.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
No messages were printed in this function, add some to ease debugging.
Also, the function returns a void * pointer so return NULL instead of
0 to make the code more readable.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We get 64 bit from PCI BAR but then truncate by assigning to 32 bit.
Make sure to check that pointer does not overflow on 32 bit platform.
Closes: 50931
Signed-off-by: Andrei Borzenkov <arvidjaar@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
EFI GOP has support for multiple different bitness types of frame buffers
and for a special "BLT only" type which is always defined to be RGBx.
Because grub2 doesn't ever directly access the frame buffer but instead
only renders graphics via the BLT interface anyway, we can easily support
these adapters.
The reason this has come up now is the emerging support for virtio-gpu
in OVMF. That adapter does not have the notion of a memory mapped frame
buffer and thus is BLT only.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Coverity Scan reports that the grub_strrchr() function can return NULL if
the character is not found. Check if that's the case for dirfile pointer.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a grub_debug_enabled() helper function instead of open coding it.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function that searches the mods section base address does not have
any debug information. Add some debugging outputs that could be useful.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The Micron PCIe SSDs Linux driver (mtip32xx) exposes block devices
as /dev/rssd[a-z]+[0-9]*. Add support for these rssd device names.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Linux creates modalias strings by filtering out non-ASCII, space,
and colon characters. Provide an option that does the same filtering
so people can create a modalias string in GRUB, and then match their
modalias patterns against it.
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When running make dist, I hit this error:
rm -f en@arabic.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o en@arabic.gmoen@arabic.po
en@arabic.po:5312: 'msgstr' is not a valid C format string, unlike 'msgid'.
Reason: The character that terminates the directive number 3 is not a valid conversion specifier.
/usr/bin/gmsgfmt: found 1 fatal error
This was caused by "%m" being replaced with foreign Unicode characters.
For example:
msgid "cannot rename the file %s to %s: %m"
msgstr "ﺹﺎﻨﻧﻮﺗ ﺮﻌﻧﺎﻤﻋ ﺖﻬﻋ ﻒִﻴﻠﻋ %s ﺕﻭ %s: %ﻡ"
Mimic the workaround used for "%s" by reversing the replacement of "%m" at
the end of the sed programs.
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
