* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
* util/grub-pe2elf.c (MODLICENSE_SECTION): New definition. All following
sections shifted.
(insert_string): Make argument const char * instead of char *.
(write_section_data): Handle long section names.
Handle module_license.
New function.
(grub_util_biosdisk_close): Use grub_util_biosdisk_flush.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_flush): New proto.
* util/grub-setup.c (setup): Use grub_util_biosdisk_flush.
is disabled, even if no partition table is found.
Otherwise, the BIOS on Dell Latitude E series laptops will freeze
during POST if an invalid partition table is contained in the PBR
of the active partition when GRUB is installed to a partition.
empty, since in that case we can only generate either nothing or a
syntactically invalid configuration file.
Reported by: Michal Suchanek. Fixes Debian bug #612898.
* conf/Makefile.common (STRIPFLAGS_KERNEL): Add -F elf32-i386 and
-R .drectve on cygwin.
* conf/i386-pc-cygwin-img-ld.sc: Merge rdata and pdata into data.
* configure.ac: Use $(top_builddir) in TARGET_OBJ2ELF.
(COND_CYGWIN): New condition.
* grub-core/Makefile.am (%.mod): Set TARGET_OBJ2ELF.
* grub-core/genmod.sh.in: Use ${TARGET_OBJ2ELF} and
not @TARGET_OBJ2ELF@.
* util/grub-pe2elf.c (write_symbol_table): Use pe_symtab->type and not
type to determine whether aux is to be used.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_edid_checksum): Likewise.
(grub_vbe_get_preferred_mode): Likewise. Try EDID followed by the
Flat Panel extension, in line with the X.org VESA driver.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
(struct grub_vbe_edid_info): Likewise.
(grub_vbe_bios_get_flat_panel_info): Add prototype.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
* util/deviceiter.c (grub_util_iterate_devices): Increase SCSI
limit to 48 (to cope with Sun Fire X4500), and IDE limit to 96
(its SATA disks are detected as slaveless IDE master drives on
kFreeBSD).
Reported by Carsten Aulbert.
(arguments): New member allow_floppy.
(argp_parser): Handle --allow-floppy.
(main): Pass allow_floppy.
* util/grub-install.in: New option --allow-floppy passed though to
grub-setup.
* util/grub-mkconfig.in: Merge `GRUB_DISABLE_LINUX_RECOVERY' and
`GRUB_DISABLE_NETBSD_RECOVERY' into a single `GRUB_DISABLE_RECOVERY'
variable. All references updated.
* util/grub.d/10_kfreebsd.in: Support recovery boot entries.
* grub-core/disk/raid.c (grub_raid_getname) [GRUB_UTIL]: New function.
(insert_array): New argument raid.
* include/grub/disk.h (grub_disk_dev) [GRUB_UTIL]: New member raidname.
* include/grub/raid.h (grub_raid_array) [GRUB_UTIL]: New member driver.
* util/grub-probe.c (probe): PRint raidname instead of plainly "mdraid".
* Makefile.util.def (grub-setup): Add grub-core/lib/reed_solomon.c.
* grub-core/Makefile.am (rs_decoder.S): New target.
(kern/i386/pc/startup.S): Depend on rs_decoder.S.
* grub-core/kern/i386/pc/startup.S (reed_solomon_redundancy): New field.
(multiboot): Move to RS part.
(post_reed_solomon): New label.
(grub_boot_drive): Move to non-RS part since it's modified in memory
on boot.
Include rs_decoder.S.
* grub-core/lib/reed_solomon.c: New file.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY):
New definition.
(GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE): Removed.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Updated.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): New definition.
* include/grub/partition.h (grub_partition_map): Change prototype of
embed to allow returning additional sectors.
* include/grub/reed_solomon.h: New file.
* util/grub-setup.c (setup): Handle Reed-Solomon.
* Makefile.util.def (libgrub.a): Add grub-core/partmap/bsdlabel.c.
* grub-core/disk/efi/efidisk.c (grub_efidisk_get_device_name):
Properly handle concatenation.
* grub-core/kern/device.c (grub_device_iterate): Likewise.
* grub-core/normal/completion.c (iterate_partition): Likewise.
* grub-core/kern/disk.c (grub_disk_open): Make disk->name not
contain partition. All users updated.
* grub-core/partmap/bsdlabel.c (grub_netbsdlabel_partition_map): New
struct.
(grub_openbsdlabel_partition_map): Likewise.
(bsdlabel_partition_map_iterate): Rename to ..
(iterate_real): ... this. New arguments sector, freebsd and pmap.
(bsdlabel_partition_map_iterate): New function.
(netopenbsdlabel_partition_map_iterate): Likewise.
(netbsdlabel_partition_map_iterate): Likewise.
(openbsdlabel_partition_map_iterate): Likewise.
(GRUB_MOD_INIT): Register new partmaps.
(GRUB_MOD_FINI): Unregister new partmaps.
* grub-core/partmap/msdos.c (pc_partition_map_iterate): Rename to ...
(grub_partition_msdos_iterate): ... this. All users updated.
Don't support embedding other than in a minix partition.
* include/grub/msdos_partition.h (grub_partition_msdos_iterate): New
proto.
* include/grub/partition.h (grub_partition): New field msdostype.
* util/grub-install.in: Handle openbsd and netbsd types being in
part_bsd module.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
