define.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Check
that PRID matches the detected subplatform and reset the subplatform
if it doesn't.
as opposed to after.
* grub-core/Makefile.core.def (kernel): Increase linking address.
(none_decompress): Likewise.
(xz_decompress): Likewise.
* grub-core/boot/mips/startup_raw.S: Use prewritten uncompression
address.
* grub-core/kern/mips/arc/init.c (grub_machine_init): Handle memory
layout change.
(grub_arch_modules_addr): New function.
* grub-core/kern/mips/init.c (grub_arch_modules_addr): Moved from here...
* grub-core/kern/mips/loongson/init.c (grub_arch_modules_addr): .. here
* grub-core/kern/mips/qemu_mips/init.c (grub_arch_modules_addr): ... and
here.
* grub-core/kern/mips/startup.S (total_size): Rename to ...
(grub_total_modules_size): ... this. Make global.
[GRUB_MACHINE_ARC]: Don't attempt to move modules out of the bss.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_ADDR):
New definition.
(GRUB_KERNEL_MIPS_QEMU_MIPS_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MACHINE_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_LINK_ADDR): Increased.
* util/grub-mkimage.c (image_target_desc): New flag
PLATFORM_FLAGS_MODULES_BEFORE_KERNEL.
(image_targets): Set PLATFORM_FLAGS_MODULES_BEFORE_KERNEL on mips-arc.
(generate_image): Handle images with modules before kernel.
* Makefile.util.def (libgrubmods.a): Add dvh.c.
* conf/Makefile.common (CCASFLAGS_PLATFORM): Add -mips3 on all mips
platforms.
* configure.ac: New target mips-arc.
* gentpl.py: Likewise.
* grub-core/Makefile.am: Likewise.
* grub-core/Makefile.core.def: Likewise.
(xz_decompress): Remove -D GRUB_MACHINE_LINK_ADDR.
(none_decompress): Likewise.
(lsdev): New module.
(datetime): Use lib/arc/datetime.c on ARC.
(part_dvh): New module.
* grub-core/commands/arc/lsdev.c: New file.
* grub-core/disk/arc/arcdisk.c: Likewise.
* grub-core/kern/mips/arc/init.c: Likewise.
* grub-core/kern/mips/cache_flush.S: Don't flush non 4-byte
aligned addresses.
* grub-core/kern/mips/dl.c (grub_arch_dl_check_header): Fix bigendian
support.
(grub_arch_dl_relocate_symbols): Likewise.
* grub-core/kern/mips/loongson/init.c (grub_get_rtc): Moved from here...
* grub-core/kern/mips/init.c (grub_get_rtc): ... here.
* grub-core/kern/mips/startup.S (grub_arch_cpuclock): Have on all
platforms.
* grub-core/lib/arc/datetime.c: New file.
* grub-core/loader/mips/linux.c: Always include time.h. Don't include
pci.h on non-loongson.
(envp_off) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove.
(grub_linux_boot): Set unused registers to 0.
(grub_cmd_linux) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove envp.
* grub-core/mmap/mips/loongson/uppermem.c: Moved from here ...
* grub-core/mmap/mips/uppermem.c: ...here.
* grub-core/partmap/dvh.c: New file.
* grub-core/term/arc/console.c: Likewise.
* grub-core/term/terminfo.c (ANSI_C0_STR): New const.
(grub_terminfo_set_current): Add terminal "arc".
(grub_terminfo_readkey): Support ARC sequences.
* include/grub/arc/arc.h: New file.
* include/grub/arc/console.h: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_ARCDISK_ID.
* include/grub/mips/arc/kernel.h: New file.
* include/grub/mips/arc/memory.h: Likewise.
* include/grub/mips/arc/time.h: Likewise.
* include/grub/mips/loongson/kernel.h (grub_halt): Moved from here ...
* include/grub/mips/kernel.h (grub_halt): ... here.
* include/grub/mips/loongson.h (GRUB_CPU_REGISTER_WRAP): Moved from
here...
* include/grub/mips/mips.h (GRUB_CPU_REGISTER_WRAP): ... here.
(GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): Moved from here ...
* include/grub/mips/mips.h (GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): .. here
* include/grub/mips/loongson/kernel.h (grub_reboot): Removed redundant
proto.
* include/grub/mips/loongson/memory.h (GRUB_ARCH_LOWMEMVSTART): Moved
from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMVSTART): ... here.
(GRUB_ARCH_LOWMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMPSTART): ... here.
(GRUB_ARCH_LOWMEMMAXSIZE): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMMAXSIZE): ... here.
(GRUB_ARCH_HIGHMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_HIGHMEMPSTART): ... here.
(grub_phys_addr_t): Moved from here ...
* include/grub/mips/memory.h (grub_phys_addr_t): ... here.
(grub_vtop): Moved from here ...
* include/grub/mips/memory.h (grub_vtop): ... here.
(grub_map_memory): Moved from here ...
* include/grub/mips/memory.h (grub_map_memory): ... here.
(grub_unmap_memory): Moved from here ...
* include/grub/mips/memory.h (grub_unmap_memory): ... here.
(grub_machine_mmap_iterate): Moved from here ...
* include/grub/mips/memory.h (grub_machine_mmap_iterate): ... here.
(grub_mmap_get_lower): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_lower): ... here.
(grub_mmap_get_upper): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_upper): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_get_rtc): Moved from
here ...
* include/grub/mips/time.h (grub_get_rtc): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_cpu_idle): Moved from
here ...
* include/grub/mips/time.h (grub_cpu_idle): ... here.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_ARC_LINK_ADDR): New
definition.
(GRUB_KERNEL_MIPS_ARC_LINK_ALIGN): Likewise.
(GRUB_KERNEL_MIPS_ARC_COMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_TOTAL_MODULE_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX_END): Likewise.
(GRUB_KERNEL_MIPS_ARC_MOD_ALIGN): Likewise.
(GRUB_MACHINE_LINK_ADDR): Likewise.
* include/grub/terminfo.h (GRUB_TERMINFO_READKEY_MAX_LEN): Increased
to 6.
* util/grub-install.in: Run dvhtool on ARC.
* util/grub-mkimage.c (image_targets): Add mips-arc.
* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
* Makefile.util.def (grub-mklayout): New file.
(grub-kbdcomp): New script.
* grub-core/Makefile.am (KERNEL_HEADER_FILES) [COND_mips_yeeloong]:
Add keyboard_layouts.h.
* grub-core/Makefile.core.def (kernel): Add commands/keylayouts.c and
commands/boot.c on yeeloong.
(keylayouts): New module.
* grub-core/bus/usb/ohci.c
* grub-core/bus/usb/uhci.c
* grub-core/bus/usb/usbhub.c (rescan): New variable.
(grub_usb_add_hub): Poll interrupt pipe for device handling.
(attach_root_port): Likewise.
(poll_nonroot_hub): Likewise.
(grub_usb_poll_devices): Likewise.
(detach_device): Close transfer.
* grub-core/bus/usb/usbtrans.c (grub_usb_execute_and_wait_transfer): New
function.
(grub_usb_bulk_setup_readwrite): Likewise.
(grub_usb_bulk_finish_readwrite): Likewise.
* grub-core/commands/keylayouts.c: New file.
* grub-core/commands/keystatus.c (grub_getkeystatus): New function.
* grub-core/commands/menuentry.c (hotkey_aliases): All several new
aliases.
* grub-core/term/at_keyboard.c: Restructured to use keylayouts and
support scancode 2.
* grub-core/term/usb_keyboard.c: Restructured to use keylayouts.
* include/grub/keyboard_layouts.h: New file.
* util/grub-mklayout.c: New file.
* util/grub-kbdcomp.in: Likewise.
Also-By: Aleš Nesrsta <starous@volny.cz>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
