__attribute__ ((packed)), leaving a comment.
(grub_mdraid_detect): Split out 0.9 and 1.x detection to ...
(grub_mdraid_detect_09): ... here and ...
(grub_mdraid_detect_1x): ... here.
* disk/raid.c (insert_array): Check for grub_xasprintf returning
NULL.
parameter. Set its pointer target to 0.
* disk/mdraid_linux.c (grub_mdraid_detect): Add start_sector
parameter. Set its pointer target to 0 for 0.9 metadata, or to the
`data_offset' value from the superblock for 1.x metadata.
* disk/raid.c (grub_raid_read): Offset reads by the start sector of
data on the device.
(insert_array): Record the start sector of data on the device.
(grub_raid_register): Pass start_sector parameters to
grub_raid_list->detect and insert_array.
* include/grub/raid.h (struct grub_raid_array): Add start_sector
member.
(struct grub_raid): Add start_sector parameter to `detect'.
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
Reported and tested by: Aleš Nesrsta.
* disk/ata.c (grub_atapi_close): Removed. All users updated.
(grub_atapi_dev): Changed .name to "ata". New field .id.
* disk/usbms.c (grub_usbms_close): Removed. All users updated.
(grub_usbms_dev): New field .id.
* disk/scsi.c (grub_scsi_iterate): Generate name.
(grub_scsi_open): Parse name.
* include/grub/scsi.h (grub_make_scsi_id): New function.
(grub_scsi_dev): Change iterate and open to number instead of naming
busses. All users updated.
(grub_scsi): Remove name. Add .bus.
suitable for using within the format argument of printf when
converting grub_size_t.
* disk/usbms.c (grub_usbms_transfer): Use PRIxGRUB_SIZE rather than
"x" to convert grub_size_t arguments.
2010-07-01 Vladimir Serbinenko <phcoder@gmail.com>
* disk/lvm.c (grub_lvm_checkvalue): New function.
(grub_lvm_check_flag): Likewise.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
Finally make USB usable.
* bus/usb/ohci.c (grub_ohci_reg_t): Add missing values.
(GRUB_OHCI_RHUB_PORT_POWER_MASK): New macro.
(GRUB_OHCI_RHUB_PORT_ALL_POWERED): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FSMPS_MASK): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FSMPS_SHIFT): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FI_SHIFT): Likewise.
(GRUB_OHCI_FSMPS): Likewise.
(GRUB_OHCI_PERIODIC_START): Likewise.
(GRUB_OHCI_FRAME_INTERVAL): Likewise.
(GRUB_OHCI_SET_PORT_ENABLE): Likewise.
(GRUB_OHCI_CLEAR_PORT_ENABLE): Likewise.
(GRUB_OHCI_SET_PORT_RESET): Likewise.
(GRUB_OHCI_SET_PORT_RESET_STATUS_CHANGE): Likewise.
* bus/usb/ohci.c (grub_ohci_pci_iter): Various important fixups.
(grub_ohci_transaction): Likewise.
(grub_ohci_transfer): Improve condition detection algorithms.
Handle toggle property. Program the transactions correctly.
Improve error handling. Various important fixups.
(grub_ohci_portstatus): Put register writes in right order.
* bus/usb/uhci.c (grub_free_queue): Compute last_trans.
(grub_uhci_transfer): Don't show "failed" message on success.
* bus/usb/usb.c (grub_usb_set_configuration): Zero-fill whole "toggle"
array.
(grub_usb_device_initialize): Read first 8 bytes of descriptor to
determine its size.
* bus/usb/usbtrans.c (grub_usb_control_msg): Use descdev.maxsize0 even
before initialization is completed. Use IN direction for empty
transfers. Use last_trans and compute toggle.
* include/grub/usbtrans.h (grub_usb_transfer): New field last_trans.
(GRUB_USB_FEATURE_ENDP_HALT): Correct the value.
(GRUB_USB_FEATURE_DEV_REMOTE_WU): Likewise.
(GRUB_USB_FEATURE_TEST_MODE): Likewise.
* include/grub/usb.h (grub_usb_err_t): New value GRUB_USB_ERR_UNRECOVERABLE.
(grub_usb_device): Increase toggle to 256.
(grub_usbms_subclass_t): New values GRUB_USBMS_SUBCLASS_RBC,
GRUB_USBMS_SUBCLASS_MMC2, GRUB_USBMS_SUBCLASS_UFI and
GRUB_USBMS_SUBCLASS_SFF8070.
* include/grub/scsicmd.h (grub_scsi_test_unit_ready): New structure.
(grub_scsi_inquiry): New member page and alloc_length.
(grub_scsi_request_sense): New structure.
(grub_scsi_request_sense_data): Likewise.
(grub_scsi_read_capacity): New fields logical_block_addr, PMI and
control.
* disk/scsi.c (grub_scsi_request_sense): New function.
(grub_scsi_test_unit_ready): Likewise.
(grub_scsi_inquiry): Fill new fields.
(grub_scsi_read_capacity): Likewise.
(grub_scsi_read10): Add request sense at the end.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_open): Add Test Unit Ready.
* disk/usbms.c (grub_usbms_finddevs): Check configcnt.
Support additional subclasses. Con't clear halt yet. Activate the
proper config. Calculate LUNs correctly.
(grub_usbms_transfer): Various important fixups.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
* bus/pci.c (grub_pci_iterate) [GRUB_MACHINE_MIPS_YEELOONG]: Skip ghosts.
* bus/usb/ohci.c (grub_ohci_portstatus): Handle R/WC correctly.
(grub_ohci_fini_hw): New function.
(grub_ohci_restore_hw): Likewise.
(GRUB_MOD_INIT(ohci)): Register preboot hook.
(GRUB_MOD_FINI(ohci)): Shutdown OHCI.
* term/usb_keyboard.c: Remove include of grub/machine/console.h.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
Dedicated DMA allocations.
* bus/pci.c (grub_memalign_dma32): New function
(grub_dma_free): Likewise.
(grub_dma_get_virt): Likewise.
(grub_dma_get_phys): Likewise.
* bus/usb/ohci.c (grub_ohci): New members hcca_addr and hcca_chunk.
(grub_ohci_pci_iter): Use dma32_alloc.
(grub_ohci_transfer): Likewise.
* bus/usb/usbtrans.c (grub_usb_control_msg): Likewise.
(grub_usb_bulk_readwrite): Likewise.
* include/grub/pci.h: Add declarations.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
CS5536 support.
* bus/cs5536.c: New file.
* bus/usb/ohci.c (grub_ohci_pci_iter): Check for CS5536.
* conf/i386.rmk (pkglib_MODULES): Add cs5536.mod.
(cs5536_mod_SOURCES): New variable.
(cs5536_mod_CFLAGS): Likewise.
(cs5536_mod_LDFLAGS): Likewise.
* conf/mips-yeeloong.rmk (kernel_img_HEADERS): Add cs5536.h and
machine/pci.h.
(kernel_img_SOURCES): Add bus/cs5536.c.
(pkglib_MODULES): Add usb.mod, usbtest.mod, ohci.mod, usbms.mod and
usb_keyboard.mod.
(usb_mod_SOURCES): New variable.
(usb_mod_CFLAGS): New variable.
(usb_mod_LDFLAGS): New variable.
(usbtest_mod_SOURCES): New variable.
(usbtest_mod_CFLAGS): New variable.
(usbtest_mod_LDFLAGS): New variable.
(ohci_mod_SOURCES): New variable.
(ohci_mod_CFLAGS): New variable.
(ohci_mod_LDFLAGS): New variable.
(usbms_mod_SOURCES): New variable.
(usbms_mod_CFLAGS): New variable.
(usbms_mod_LDFLAGS): New variable.
(usb_keyboard_mod_SOURCES): New variable.
(usb_keyboard_mod_CFLAGS): New variable.
(usb_keyboard_mod_LDFLAGS): New variable.
* include/grub/smbus.h: New file.
* include/grub/cs5536.h: New file.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
chunk size and disk size, which are already given as sector counts
as distinct from the 0.90 units. Fetch the correct device number
from the role table instead of using the table index.
Fix over-4GiB seek on sparc64.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_seek):
Replace pos_i and pos_lo with pos. All users updated.
* include/grub/powerpc/ieee1275/ieee1275.h (GRUB_IEEE1275_CELL_SIZEOF):
New constant.
* include/grub/sparc64/ieee1275/ieee1275.h (GRUB_IEEE1275_CELL_SIZEOF):
Likewise.
* kern/ieee1275/ieee1275.c (grub_ieee1275_seek): Split pos into pos_hi
and pos_lo.
