Change ofnet.c to disknet.c and remove almost all ieee1275 specific code.
Create grub_net_malloc to handle iee1275 memory issues in a temporary solution.
* include/grub/net/arp.h: added arp header, arp cache entry and related constants and functions
* net/arp.c: added functions arp_init_table, arp_find_entry, arp_resolve and arp_receive
* net/ethernet.c (send_ethernet_packet): replaced hardcoded hardware address by parameter target_addr
* net/ethernet.c (recv_ethernet_packet): added call to arp_receive when packet is of type 0x803 (ARP) and only return when packet is of type determined by parameter ethertype
* net/ip.c (send_ip_packet): added call to arp_resolve to determine hardware address of destination
* net/netbuff.c (grub_netbuff_alloc): fixed swapped parameters in call to grub_memalign
an to list its information with command ls.
* fs/ieee1275/ofnet.c (grub_ofnet_open): parse parameters to determine netdisk data
* fs/ieee1275/ofnet.c (grub_ofnet_close): dealloc netdisk data
* include/grub/disk.h: added struct grub_netdisk_data
* include/grub/ieee1275/ofnet.h: added newline
* kern/disk.c (grub_disk_open): ignore partition check for netdisk
* normal/misc.c (grub_normal_print_device_info): added support to list netdisk information
(grub_device_mapper_supported): New function.
* include/grub/emu/misc.h (grub_device_mapper_supported): Add
prototype.
* kern/emu/hostdisk.c (find_partition_start): Check whether
device-mapper is supported before trying to use it.
* util/deviceiter.c (grub_util_iterate_devices): Likewise.
Finally make USB usable.
* bus/usb/ohci.c (grub_ohci_reg_t): Add missing values.
(GRUB_OHCI_RHUB_PORT_POWER_MASK): New macro.
(GRUB_OHCI_RHUB_PORT_ALL_POWERED): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FSMPS_MASK): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FSMPS_SHIFT): Likewise.
(GRUB_OHCI_REG_FRAME_INTERVAL_FI_SHIFT): Likewise.
(GRUB_OHCI_FSMPS): Likewise.
(GRUB_OHCI_PERIODIC_START): Likewise.
(GRUB_OHCI_FRAME_INTERVAL): Likewise.
(GRUB_OHCI_SET_PORT_ENABLE): Likewise.
(GRUB_OHCI_CLEAR_PORT_ENABLE): Likewise.
(GRUB_OHCI_SET_PORT_RESET): Likewise.
(GRUB_OHCI_SET_PORT_RESET_STATUS_CHANGE): Likewise.
* bus/usb/ohci.c (grub_ohci_pci_iter): Various important fixups.
(grub_ohci_transaction): Likewise.
(grub_ohci_transfer): Improve condition detection algorithms.
Handle toggle property. Program the transactions correctly.
Improve error handling. Various important fixups.
(grub_ohci_portstatus): Put register writes in right order.
* bus/usb/uhci.c (grub_free_queue): Compute last_trans.
(grub_uhci_transfer): Don't show "failed" message on success.
* bus/usb/usb.c (grub_usb_set_configuration): Zero-fill whole "toggle"
array.
(grub_usb_device_initialize): Read first 8 bytes of descriptor to
determine its size.
* bus/usb/usbtrans.c (grub_usb_control_msg): Use descdev.maxsize0 even
before initialization is completed. Use IN direction for empty
transfers. Use last_trans and compute toggle.
* include/grub/usbtrans.h (grub_usb_transfer): New field last_trans.
(GRUB_USB_FEATURE_ENDP_HALT): Correct the value.
(GRUB_USB_FEATURE_DEV_REMOTE_WU): Likewise.
(GRUB_USB_FEATURE_TEST_MODE): Likewise.
* include/grub/usb.h (grub_usb_err_t): New value GRUB_USB_ERR_UNRECOVERABLE.
(grub_usb_device): Increase toggle to 256.
(grub_usbms_subclass_t): New values GRUB_USBMS_SUBCLASS_RBC,
GRUB_USBMS_SUBCLASS_MMC2, GRUB_USBMS_SUBCLASS_UFI and
GRUB_USBMS_SUBCLASS_SFF8070.
* include/grub/scsicmd.h (grub_scsi_test_unit_ready): New structure.
(grub_scsi_inquiry): New member page and alloc_length.
(grub_scsi_request_sense): New structure.
(grub_scsi_request_sense_data): Likewise.
(grub_scsi_read_capacity): New fields logical_block_addr, PMI and
control.
* disk/scsi.c (grub_scsi_request_sense): New function.
(grub_scsi_test_unit_ready): Likewise.
(grub_scsi_inquiry): Fill new fields.
(grub_scsi_read_capacity): Likewise.
(grub_scsi_read10): Add request sense at the end.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_open): Add Test Unit Ready.
* disk/usbms.c (grub_usbms_finddevs): Check configcnt.
Support additional subclasses. Con't clear halt yet. Activate the
proper config. Calculate LUNs correctly.
(grub_usbms_transfer): Various important fixups.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
* bus/pci.c (grub_pci_iterate) [GRUB_MACHINE_MIPS_YEELOONG]: Skip ghosts.
* bus/usb/ohci.c (grub_ohci_portstatus): Handle R/WC correctly.
(grub_ohci_fini_hw): New function.
(grub_ohci_restore_hw): Likewise.
(GRUB_MOD_INIT(ohci)): Register preboot hook.
(GRUB_MOD_FINI(ohci)): Shutdown OHCI.
* term/usb_keyboard.c: Remove include of grub/machine/console.h.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
Dedicated DMA allocations.
* bus/pci.c (grub_memalign_dma32): New function
(grub_dma_free): Likewise.
(grub_dma_get_virt): Likewise.
(grub_dma_get_phys): Likewise.
* bus/usb/ohci.c (grub_ohci): New members hcca_addr and hcca_chunk.
(grub_ohci_pci_iter): Use dma32_alloc.
(grub_ohci_transfer): Likewise.
* bus/usb/usbtrans.c (grub_usb_control_msg): Likewise.
(grub_usb_bulk_readwrite): Likewise.
* include/grub/pci.h: Add declarations.
2010-06-02 Vladimir Serbinenko <phcoder@gmail.com>
CS5536 support.
* bus/cs5536.c: New file.
* bus/usb/ohci.c (grub_ohci_pci_iter): Check for CS5536.
* conf/i386.rmk (pkglib_MODULES): Add cs5536.mod.
(cs5536_mod_SOURCES): New variable.
(cs5536_mod_CFLAGS): Likewise.
(cs5536_mod_LDFLAGS): Likewise.
* conf/mips-yeeloong.rmk (kernel_img_HEADERS): Add cs5536.h and
machine/pci.h.
(kernel_img_SOURCES): Add bus/cs5536.c.
(pkglib_MODULES): Add usb.mod, usbtest.mod, ohci.mod, usbms.mod and
usb_keyboard.mod.
(usb_mod_SOURCES): New variable.
(usb_mod_CFLAGS): New variable.
(usb_mod_LDFLAGS): New variable.
(usbtest_mod_SOURCES): New variable.
(usbtest_mod_CFLAGS): New variable.
(usbtest_mod_LDFLAGS): New variable.
(ohci_mod_SOURCES): New variable.
(ohci_mod_CFLAGS): New variable.
(ohci_mod_LDFLAGS): New variable.
(usbms_mod_SOURCES): New variable.
(usbms_mod_CFLAGS): New variable.
(usbms_mod_LDFLAGS): New variable.
(usb_keyboard_mod_SOURCES): New variable.
(usb_keyboard_mod_CFLAGS): New variable.
(usb_keyboard_mod_LDFLAGS): New variable.
* include/grub/smbus.h: New file.
* include/grub/cs5536.h: New file.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM on qemu.
* kern/ieee1275/init.c (grub_claim_heap): Don0t allocate below
1.5MiB if GRUB_IEEE1275_FLAG_NO_PRE1_5M_CLAIM is set.
