We bumped into the build error while testing gcc-10 pre-release.
../../grub-core/disk/mdraid1x_linux.c: In function 'grub_mdraid_detect':
../../grub-core/disk/mdraid1x_linux.c:181:15: error: array subscript <unknown> is outside array bounds of 'grub_uint16_t[0]' {aka 'short unsigned int[0]'} [-Werror=array-bounds]
181 | (char *) &sb.dev_roles[grub_le_to_cpu32 (sb.dev_number)]
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../grub-core/disk/mdraid1x_linux.c:98:17: note: while referencing 'dev_roles'
98 | grub_uint16_t dev_roles[0]; /* Role in array, or 0xffff for a spare, or 0xfffe for faulty. */
| ^~~~~~~~~
../../grub-core/disk/mdraid1x_linux.c:127:33: note: defined here 'sb'
127 | struct grub_raid_super_1x sb;
| ^~
cc1: all warnings being treated as errors
Apparently gcc issues the warning when trying to access sb.dev_roles
array's member, since it is a zero length array as the last element of
struct grub_raid_super_1x that is allocated sparsely without extra
chunks for the trailing bits, so the warning looks legitimate in this
regard.
As the whole thing here is doing offset computation, it is undue to use
syntax that would imply array member access then take address from it
later. Instead we could accomplish the same thing through basic array
pointer arithmetic to pacify the warning.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The memory requested for the event is not released here,
causing memory leaks. This patch fixes this problem.
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The LVM cache logical volume is the logical volume consisting of the original
and the cache pool logical volume. The original is usually on a larger and
slower storage device while the cache pool is on a smaller and faster one. The
performance of the original volume can be improved by storing the frequently
used data on the cache pool to utilize the greater performance of faster
device.
The default cache mode "writethrough" ensures that any data written will be
stored both in the cache and on the origin LV, therefore grub can be straight
to read the original lv as no data loss is guarenteed.
The second cache mode is "writeback", which delays writing from the cache pool
back to the origin LV to have increased performance. The drawback is potential
data loss if losing the associated cache device.
During the boot time grub reads the LVM offline i.e. LVM volumes are not
activated and mounted, hence it should be fine to read directly from original
lv since all cached data should have been flushed back in the process of taking
it offline.
It is also not much helpful to the situation by adding fsync calls to the
install code. The fsync did not force to write back dirty cache to the original
device and rather it would update associated cache metadata to complete the
write transaction with the cache device. IOW the writes to cached blocks still
go only to the cache device.
To write back dirty cache, as LVM cache did not support dirty cache flush per
block range, there'no way to do it for file. On the other hand the "cleaner"
policy is implemented and can be used to write back "all" dirty blocks in a
cache, which effectively drain all dirty cache gradually to attain and last in
the "clean" state, which can be useful for shrinking or decommissioning a
cache. The result and effect is not what we are looking for here.
In conclusion, as it seems no way to enforce file writes to the original
device, grub may suffer from power failure as it cannot assemble the cache
device and read the dirty data from it. However since the case is only
applicable to writeback mode which is sensitive to data lost in nature, I'd
still like to propose my (relatively simple) patch and treat reading dirty
cache as improvement.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When building GRUB with memory management debugging enabled, then the
build fails because of `grub_debug_malloc()` and `grub_debug_free()`
being undefined in the luks2 module. The cause is that we patch
"base64.h" to unconditionaly include "config-util.h", which shouldn't be
included for modules at all. As a result, `MM_DEBUG` is defined when
building the module, causing it to use the debug memory allocation
functions. As these are not built into modules, we end up with a linker
error.
Fix the issue by removing the <config-util.h> include altogether. The
sole reason it was included was for the `_GL_ATTRIBUTE_CONST` macro,
which we can simply define as empty in case it's not set.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows comparing file ages on EFI system partitions.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This provides the node's attributes outside the iterator function
so the file modification time can be accessed and reported.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fixes a build failure:
grub-core/commands/date.c:49: undefined reference to `grub_get_weekday_name'
grub-core/commands/ls.c:155: undefined reference to `grub_unixtime2datetime'
Bug: https://bugs.gentoo.org/711512
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add debug information to EFI GOP video driver probing function.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
All other video drivers use "video" as the debug condition instead of "fb"
so change this in the efi/uga driver to make it consistent with the others.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
No messages were printed in this function, add some to ease debugging.
Also, the function returns a void * pointer so return NULL instead of
0 to make the code more readable.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We get 64 bit from PCI BAR but then truncate by assigning to 32 bit.
Make sure to check that pointer does not overflow on 32 bit platform.
Closes: 50931
Signed-off-by: Andrei Borzenkov <arvidjaar@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
EFI GOP has support for multiple different bitness types of frame buffers
and for a special "BLT only" type which is always defined to be RGBx.
Because grub2 doesn't ever directly access the frame buffer but instead
only renders graphics via the BLT interface anyway, we can easily support
these adapters.
The reason this has come up now is the emerging support for virtio-gpu
in OVMF. That adapter does not have the notion of a memory mapped frame
buffer and thus is BLT only.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Coverity Scan reports that the grub_strrchr() function can return NULL if
the character is not found. Check if that's the case for dirfile pointer.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a grub_debug_enabled() helper function instead of open coding it.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function that searches the mods section base address does not have
any debug information. Add some debugging outputs that could be useful.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The Micron PCIe SSDs Linux driver (mtip32xx) exposes block devices
as /dev/rssd[a-z]+[0-9]*. Add support for these rssd device names.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Linux creates modalias strings by filtering out non-ASCII, space,
and colon characters. Provide an option that does the same filtering
so people can create a modalias string in GRUB, and then match their
modalias patterns against it.
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently the string functions grub_strtol(), grub_strtoul(), and
grub_strtoull() don't declare the "end" pointer in such a way as to
require the pointer itself or the character array to be immutable to the
implementation, nor does the C standard do so in its similar functions,
though it does require us not to change any of it.
The typical declarations of these functions follow this pattern:
long
strtol(const char * restrict nptr, char ** restrict endptr, int base);
Much of the reason for this is historic, and a discussion of that
follows below, after the explanation of this change. (GRUB currently
does not include the "restrict" qualifiers, and we name the arguments a
bit differently.)
The implementation is semantically required to treat the character array
as immutable, but such accidental modifications aren't stopped by the
compiler, and the semantics for both the callers and the implementation
of these functions are sometimes also helped by adding that requirement.
This patch changes these declarations to follow this pattern instead:
long
strtol(const char * restrict nptr,
const char ** const restrict endptr,
int base);
This means that if any modification to these functions accidentally
introduces either an errant modification to the underlying character
array, or an accidental assignment to endptr rather than *endptr, the
compiler should generate an error. (The two uses of "restrict" in this
case basically mean strtol() isn't allowed to modify the character array
by going through *endptr, and endptr isn't allowed to point inside the
array.)
It also means the typical use case changes to:
char *s = ...;
const char *end;
long l;
l = strtol(s, &end, 10);
Or even:
const char *p = str;
while (p && *p) {
long l = strtol(p, &p, 10);
...
}
This fixes 26 places where we discard our attempts at treating the data
safely by doing:
const char *p = str;
long l;
l = strtol(p, (char **)&ptr, 10);
It also adds 5 places where we do:
char *p = str;
while (p && *p) {
long l = strtol(p, (const char ** const)&p, 10);
...
/* more calls that need p not to be pointer-to-const */
}
While moderately distasteful, this is a better problem to have.
With one minor exception, I have tested that all of this compiles
without relevant warnings or errors, and that /much/ of it behaves
correctly, with gcc 9 using 'gcc -W -Wall -Wextra'. The one exception
is the changes in grub-core/osdep/aros/hostdisk.c , which I have no idea
how to build.
Because the C standard defined type-qualifiers in a way that can be
confusing, in the past there's been a slow but fairly regular stream of
churn within our patches, which add and remove the const qualifier in many
of the users of these functions. This change should help avoid that in
the future, and in order to help ensure this, I've added an explanation
in misc.h so that when someone does get a compiler warning about a type
error, they have the fix at hand.
The reason we don't have "const" in these calls in the standard is
purely anachronistic: C78 (de facto) did not have type qualifiers in the
syntax, and the "const" type qualifier was added for C89 (I think; it
may have been later). strtol() appears to date from 4.3BSD in 1986,
which means it could not be added to those functions in the standard
without breaking compatibility, which is usually avoided.
The syntax chosen for type qualifiers is what has led to the churn
regarding usage of const, and is especially confusing on string
functions due to the lack of a string type. Quoting from C99, the
syntax is:
declarator:
pointer[opt] direct-declarator
direct-declarator:
identifier
( declarator )
direct-declarator [ type-qualifier-list[opt] assignment-expression[opt] ]
...
direct-declarator [ type-qualifier-list[opt] * ]
...
pointer:
* type-qualifier-list[opt]
* type-qualifier-list[opt] pointer
type-qualifier-list:
type-qualifier
type-qualifier-list type-qualifier
...
type-qualifier:
const
restrict
volatile
So the examples go like:
const char foo; // immutable object
const char *foo; // mutable pointer to object
char * const foo; // immutable pointer to mutable object
const char * const foo; // immutable pointer to immutable object
const char const * const foo; // XXX extra const keyword in the middle
const char * const * const foo; // immutable pointer to immutable
// pointer to immutable object
const char ** const foo; // immutable pointer to mutable pointer
// to immutable object
Making const left-associative for * and right-associative for everything
else may not have been the best choice ever, but here we are, and the
inevitable result is people using trying to use const (as they should!),
putting it at the wrong place, fighting with the compiler for a bit, and
then either removing it or typecasting something in a bad way. I won't
go into describing restrict, but its syntax has exactly the same issue
as with const.
Anyway, the last example above actually represents the *behavior* that's
required of strtol()-like functions, so that's our choice for the "end"
pointer.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The debug message printed when decryption with a keyslot fails is
missing its trailing newline. Add it to avoid mangling it with
subsequent output.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The necessary check for NULL before use of function ver->close is not
taking place in the failure path. This patch simply adds the missing
check and fixes the problem that GRUB hangs indefinitely after booting
rogue image without valid signature if secure boot is turned on.
Now it displays like this for booting rogue UEFI image:
error: bad shim signature
error: you need to load the kernel first
Press any key to continue...
and then you can go back to boot menu by pressing any key or after a few
seconds expired.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch implements a search for a specific configuration when the config
file is on a remoteserver. It uses the following order:
1) DHCP client UUID option.
2) MAC address (in lower case hexadecimal with dash separators);
3) IP (in upper case hexadecimal) or IPv6;
4) The original grub.cfg file.
This procedure is similar to what is used by pxelinux and yaboot:
http://www.syslinux.org/wiki/index.php/PXELINUX#config
It is enabled by default but can be disabled by setting the environment
variable "feature_net_search_cfg" to "n" in an embedded configuration.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=873406
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch sets a net_<interface>_clientid and net_<interface>_clientuuid
GRUB environment variables, using the DHCP client ID and UUID options if
these are found.
In the same way than net_<interface>_<option> variables are set for other
options such domain name, boot file, next server, etc.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The printf(3) function has support for the %X format specifier, to output
an unsigned hexadecimal integer in uppercase.
This can be achived in GRUB using the %x format specifier in grub_printf()
and calling grub_toupper(), but it is more convenient if there is support
for %X in grub_printf().
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The common datetime helper functions are currently included in the normal
module, but this makes any other module that calls these functions to have
a dependency with the normal module only for this reason.
Since the normal module does a lot of stuff, it calls functions from other
modules. But since other modules may depend on it for calling the datetime
helpers, this could lead to circular dependencies between modules.
As an example, when platform == xen the grub_get_datetime() function from
the datetime module calls to the grub_unixtime2datetime() helper function
from the normal module. Which leads to the following module dependency:
datetime -> normal
and send_dhcp_packet() from the net module calls the grub_get_datetime()
function, which leads to the following module dependency:
net -> datetime -> normal
but that means that the normal module is not allowed to depend on net or
any other module that depends on it due the transitive dependency caused
by datetime. A recent patch attempted to add support to fetch the config
file over the network, which leads to the following circular dependency:
normal -> net -> datetime -> normal
So having the datetime helpers in the normal module makes it quite fragile
and easy to add circular dependencies like these, that break the build due
the genmoddep.awk script catching the issues.
Fix this by taking the datetime helper functions out of the normal module
and instead add them to the datetime module itself. Besides fixing these
issues, it makes more sense to have these helper functions there anyways.
Reported-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch updates the miniLZO library to a newer version, which among other
things fixes "CVE-2014-4607 - lzo: lzo1x_decompress_safe() integer overflow"
that is present in the current used in GRUB.
It also updates the "GRUB Developers Manual", to mention that the library is
used and describes the process to update it to a newer release when needed.
Resolves: http://savannah.gnu.org/bugs/?42635
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
gcc says:
grub-core/fs/squash4.c: In function ‘direct_read’:
grub-core/fs/squash4.c:868:10: error: ‘err’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
868 | if (err)
| ^
cc1: all warnings being treated as errors
This patch initializes it to GRUB_ERR_NONE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While testing the 86-DOS lDebug [1] booting from GRUB2, newer versions of the
debugger would fail to load when booted using GRUB's freedos command. The
behaviour observed in a qemu i386 machine was that the ROM-BIOS's boot load
would start anew, instead of loading the selected debugger as kernel.
It came to light that there was a size limit: Kernel files that were 58880
bytes (E600h) long or shorter succeeded to boot, while files that were 64000
bytes or longer failed in the manner described.
Eventually it turned out that the relocator16 stub succeeded whenever it was
placed completely within the first 64 KiB of the Low Memory Area. The chunk
for the relocator is allocated with a minimum address of 0x8010 and a maximum
address just below 0xA0000 [2]. That means if the kernel is, for instance,
E600h bytes long, then the kernel will be allocated memory starting at 00600h
(the fixed FreeDOS kernel load address) up to E600h + 00600h = 0EC00h, which
leaves 1400h (5120) bytes for the relocator to stay in the first 64 KiB.
If the kernel is 64000 bytes (FA00h) long, then the relocator must go to
FA00h + 00600h = 10000h at least which is outside the first 64 KiB.
The problem is that the relocator16 initialises the DS register with a
"pseudo real mode" descriptor, which is defined with a segment limit of
64 KiB and a segment base of zero. After that, the relocator addressed
parts of itself (implicitly) using the DS register, with an offset from
ESI, which holds the linear address of the relocator's base [3]. With the
larger kernel files this would lead to accessing data beyond the 64 KiB
segment limit, presumably leading to a fault and perhaps a subsequent
triple-fault or such.
This patch fixes the relocator to set the segment base of the descriptors
to the base address of the relocator; then, the subsequent accesses to
the relocator's variables are done without the ESI register as an index.
This does not interfere with the relocator's or its target's normal
operation; the segment limits are still loaded with 64 KiB and all the
segment bases are subsequently reset by the relocator anyway.
Current versions of the debugger to test are uploaded to [4]. The file
ldebugnh.com (LZ4-compressed and built with -D_EXTHELP=0) at 58368 bytes
loads successfully, whereas ldebug.com at 64000 bytes fails. Loading one
of these files requires setting root to a FAT FS partition and using the
freedos command to specify the file as kernel:
set root='(hd0,msdos1)'
freedos /ldebug.com
boot
Booting the file using the multiboot command (which uses a WIP entrypoint
of the debugger) works, as it does not use GRUB's relocator16 but instead
includes a loader in the kernel itself, which drops it back to 86 Mode.
[1]: https://hg.ulukai.org/ecm/ldebug
[2]: http://git.savannah.gnu.org/cgit/grub.git/tree/grub-core/lib/i386/relocator.c?id=495781f5ed1b48bf27f16c53940d6700c181c74c#n127
[3]: http://git.savannah.gnu.org/cgit/grub.git/tree/grub-core/lib/i386/relocator16.S?id=495781f5ed1b48bf27f16c53940d6700c181c74c#n97
[4]: https://ulukai.org/ecm/lDebug-5479a7988d21-nohelp.zip
Signed-off-by: C. Masloch <pushbx@ulukai.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With cryptsetup 2.0, a new version of LUKS was introduced that breaks
compatibility with the previous version due to various reasons. GRUB
currently lacks any support for LUKS2, making it impossible to decrypt
disks encrypted with that version. This commit implements support for
this new format.
Note that LUKS1 and LUKS2 are quite different data formats. While they
do share the same disk signature in the first few bytes, representation
of encryption parameters is completely different between both versions.
While the former version one relied on a single binary header, only,
LUKS2 uses the binary header only in order to locate the actual metadata
which is encoded in JSON. Furthermore, the new data format is a lot more
complex to allow for more flexible setups, like e.g. having multiple
encrypted segments and other features that weren't previously possible.
Because of this, it was decided that it doesn't make sense to keep both
LUKS1 and LUKS2 support in the same module and instead to implement it
in two different modules luks and luks2.
The proposed support for LUKS2 is able to make use of the metadata to
decrypt such disks. Note though that in the current version, only the
PBKDF2 key derival function is supported. This can mostly attributed to
the fact that the libgcrypt library currently has no support for either
Argon2i or Argon2id, which are the remaining KDFs supported by LUKS2. It
wouldn't have been much of a problem to bundle those algorithms with
GRUB itself, but it was decided against that in order to keep down the
number of patches required for initial LUKS2 support. Adding it in the
future would be trivial, given that the code structure is already in
place.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The luks module contains quite a lot of logic to parse cipher and
cipher-mode strings like aes-xts-plain64 into constants to apply them
to the grub_cryptodisk_t structure. This code will be required by the
upcoming luks2 module, as well, which is why this commit moves it into
its own function grub_cryptodisk_setcipher in the cryptodisk module.
While the strings are probably rather specific to the LUKS modules, it
certainly does make sense that the cryptodisk module houses code to set
up its own internal ciphers instead of hosting that code in the luks
module.
Except for necessary adjustments around error handling, this commit does
an exact move of the cipher configuration logic from luks.c to
cryptodisk.c. Any behavior changes are unintentional.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While the AFSplitter code is currently used only by the luks module,
upcoming support for luks2 will add a second module that depends on it.
To avoid any linker errors when adding the code to both modules because
of duplicated symbols, this commit moves it into its own standalone
module afsplitter as a preparatory step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The upcoming support for LUKS2 disc encryption requires us to include a
parser for base64-encoded data, as it is used to represent salts and
digests. As gnulib already has code to decode such data, we can just
add it to the boostrapping configuration in order to make it available
in GRUB.
The gnulib module makes use of booleans via the <stdbool.h> header. As
GRUB does not provide any POSIX wrapper header for this, but instead
implements support for bool in <sys/types.h>, we need to patch
base64.h to not use <stdbool.h> anymore. We unfortunately cannot include
<sys/types.h> instead, as it would then use gnulib's internal header
while compiling the gnulib object but our own <sys/types.h> when
including it in a GRUB module. Because of this, the patch replaces the
include with a direct typedef.
A second fix is required to make available _GL_ATTRIBUTE_CONST, which
is provided by the configure script. As base64.h does not include
<config.h>, it is thus not available and results in a compile error.
This is fixed by adding an include of <config-util.h>.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While the newly added jsmn library provides the parsing interface, it
does not provide any kind of interface to act on parsed tokens. Instead,
the caller is expected to handle pointer arithmetics inside of the token
array in order to extract required information. While simple, this
requires users to know some of the inner workings of the library and is
thus quite an unintuitive interface.
This commit adds a new interface on top of the jsmn parser that provides
convenience functions to retrieve values from the parsed json type, grub_json_t.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The upcoming support for LUKS2 encryption will require a JSON parser to
decode all parameters required for decryption of a drive. As there is
currently no other tool that requires JSON, and as gnulib does not
provide a parser, we need to introduce a new one into the code base. The
backend for the JSON implementation is going to be the jsmn library [1].
It has several benefits that make it a very good fit for inclusion in
GRUB:
- It is licensed under MIT.
- It is written in C89.
- It has no dependencies, not even libc.
- It is small with only about 500 lines of code.
- It doesn't do any dynamic memory allocation.
- It is testen on x86, amd64, ARM and AVR.
The library itself comes as a single header, only, that contains both
declarations and definitions. The exposed interface is kind of
simplistic, though, and does not provide any convenience features
whatsoever. Thus there will be a separate interface provided by GRUB
around this parser that is going to be implemented in the following
commit. This change only imports jsmn.h from tag v1.1.0 and adds it
unmodified to a new json module with the following command:
curl -L https://raw.githubusercontent.com/zserge/jsmn/v1.1.0/jsmn.h \
-o grub-core/lib/json/jsmn.h
Upstream jsmn commit hash: fdcef3ebf886fa210d14956d3c068a653e76a24e
Upstream jsmn commit name: Modernize (#149), 2019-04-20
[1]: https://github.com/zserge/jsmn
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some cases GRUB2 allocates multiboot2 structure at 0 address, that is
a confusing behavior. Consumers of that structure can have internal NULL-checks
that will throw an error when get a pointer to data allocated at address 0.
To prevent that, define min address for mbi allocation on x86 and x86_64
platforms.
Signed-off-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent work around x86 Linux kernel loader revealed an underflow in the
setup_header length calculation and another related issue. Both lead to
the memory overwrite and later machine crash.
Currently when the GRUB copies the setup_header into the linux_params
(struct boot_params, traditionally known as "zero page") it assumes the
setup_header size as sizeof(linux_i386_kernel_header/lh). This is
incorrect. It should use the value calculated accordingly to the Linux
kernel boot protocol. Otherwise in case of pretty old kernel, to be
exact Linux kernel boot protocol, the GRUB may write more into
linux_params than it was expected to. Fortunately this is not very big
issue. Though it has to be fixed. However, there is also an underflow
which is grave. It happens when
sizeof(linux_i386_kernel_header/lh) > "real size of the setup_header".
Then len value wraps around and grub_file_read() reads whole kernel into
the linux_params overwriting memory past it. This leads to the GRUB
memory allocator breakage and finally to its crash during boot.
The patch fixes both issues. Additionally, it moves the code not related to
grub_memset(linux_params)/grub_memcpy(linux_params)/grub_file_read(linux_params)
section outside of it to not confuse the reader.
Fixes: e683cfb0cf (loader/i386/linux: Calculate the setup_header length)
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
New 3- and 4-copy variants of RAID1 were merged into Linux kernel 5.5.
Add the two new profiles to the list of recognized ones. As this builds
on the same code as RAID1, only the redundancy level needs to be
adjusted, the rest is done by the existing code.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some TFTP servers do not handle multiple consecutive slashes correctly.
This patch avoids sending TFTP requests with non-normalized paths.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We are often bothered by this sort of lvm warning while running grub-install
every now and then:
File descriptor 4 (/dev/vda1) leaked on vgs invocation. Parent PID 1991: /usr/sbin/grub2-install
The requirement related to the warning is dictated in the lvm man page:
"On invocation, lvm requires that only the standard file descriptors stdin,
stdout and stderr are available. If others are found, they get closed and
messages are issued warning about the leak. This warning can be suppressed by
setting the environment variable LVM_SUPPRESS_FD_WARNINGS."
While it could be disabled through settings, most Linux distributions seem to
enable it by default and the justification provided by the developer looks to
be valid to me: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466138#15
Rather than trying to close and reopen the file descriptor to the same file
multiple times, which is rather cumbersome, for the sake of no vgs invocation
could happen in between. This patch enables the close-on-exec flag (O_CLOEXEC)
for new file descriptor returned by the open() system call, making it closed
thus not inherited by the child process forked and executed by the exec()
family of functions.
Fixes Debian bug #466138.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch fixes an issue that prevented the at_keyboard module to work
(for me). The cause was a bad/wrong return value in the
grub_at_keyboard_getkey() function in grub-core/term/at_keyboard.c file
at line 237. My symptoms were to have an unresponsive keyboard. Keys
needed to be pressed 10x and more to effectively be printed sometimes
generating multiple key presses (after 1 or 2 sec of no printing). It
was very problematic when typing passphrase in early stage (with
GRUB_ENABLE_CRYPTODISK). When switched to "console" terminal input
keyboard worked perfectly. It also worked great with the GRUB 2.02
packaged by Debian (2.02+dfsg1-20). It was not an output issue but an
input one.
I've managed to analyze the issue and found that it came from the commit
216950a4e (at_keyboard: Split protocol from controller code.). Three
lines where moved from the fetch_key() function in
grub-core/term/at_keyboard.c file to the beginning of
grub_at_keyboard_getkey() function (same file). However, returning -1
made sense when it happened in fetch_key() function but not anymore in
grub_at_keyboard_getkey() function which should return GRUB_TERM_NO_KEY.
I think it was just an incomplete cut-paste missing a small manual
correction. Let's fix it.
Note: Commit message updated by Daniel Kiper.
Signed-off-by: Michael Bideau <mica.devel@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Extend partition UUID probing support in GRUB core to display pseudo
partition UUIDs for MBR (MSDOS) partitions.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Don't free file->data on receiving FIN flag since it is used all over
without checking. http_close() will be called later to free that memory.
Fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=860834
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The device tree may passed by the firmware as UEFI configuration
table. Let lsefisystab display a short text and not only the GUID
for the device tree.
Here is an example output:
grub> lsefisystab
Address: 0xbff694d8
Signature: 5453595320494249 revision: 00020046
Vendor: Das U-Boot, Version=20190700
2 tables:
0xbe741000 eb9d2d31-2d88-11d3-9a160090273fc14d SMBIOS
0x87f00000 b1b621d5-f19c-41a5-830bd9152c69aae0 DEVICE TREE
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The following are two use cases from Rajat Jain <rajatjain@juniper.net>:
1) We have a board that boots Linux and this board itself can be plugged
into one of different chassis types. We need to pass different
parameters to the kernel based on the "CHASSIS_TYPE" information
that is passed by the bios in the DMI/SMBIOS tables.
2) We may have a USB stick that can go into multiple boards, and the
exact kernel to be loaded depends on the machine information
(PRODUCT_NAME etc) passed via the DMI.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds the GUID and includes it in lsefisystab output.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Blocklist fallout cleanup after commit 5c6f9bc15 (generic/blocklist: Fix
implicit declaration of function grub_file_filter_disable_compression()).
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Linux supports root=PARTUUID=<partuuid> boot argument, so add
support for probing it. Compared to the fs UUID, the partition
UUID does not change when reformatting a partition.
For now, only disks using a GPT partition table are supported.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Unlike in case of disks in this case it's just a single place, so it's easier
to just #undef
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the grub_f2fs_label
function since the result is found to be false postive.
A pointer to the 'volume_name' member of 'struct grub_f2fs_superblock' is
guaranteed to be aligned as the offset of 'volume_name' within the struct
is dividable by the natural alignment on both 32- and 64-bit targets.
grub-core/fs/f2fs.c: In function ‘grub_f2fs_label’:
grub-core/fs/f2fs.c:1253:60: error: taking address of packed member of ‘struct grub_f2fs_superblock’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1253 | *label = (char *) grub_f2fs_utf16_to_utf8 (data->sblock.volume_name);
| ~~~~~~~~~~~~^~~~~~~~~~~~
cc1: all warnings being treated as errors
Reported-by: Neil MacLeod <neil@nmacleod.com>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Neil MacLeod <neil@nmacleod.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On UEFI, 'text' gfxpayload is not supported, but we still reach parse_modespec()
with it, which will obviously fail. Fortunately, whatever gfxpayload is set,
we still still have the 'auto' default to fall back to. Allow getting to this
fallback by not trying to parse 'text' as a modespec.
This is because 'text' correctly doesn't parse as a modespec, and ought to have
been ignored before we got to that point, just like it is immediately picked if
we're running on a system where 'text' is a supported video mode.
Bug: https://savannah.gnu.org/bugs/index.php?56217
Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function grub_get_node_path() could return uninitialized offset with
level == 0 if the block is greater than direct_index + 2 * direct_blks +
2 * indirect_blks + dindirect_blks. The uninitialized offset is then used
by function grub_f2fs_get_block() because level == 0 is valid and
meaningful return to be processed.
The fix is to set level = -1 as return value by grub_get_node_path() to
signify an error that the input block cannot be handled. Any caller
should therefore check level is negative or not before processing the
output.
Reported-by: Neil MacLeod <neil@nmacleod.com>
Signed-off-by: Michael Chang <mchang@suse.com>
Tested-by: Neil MacLeod <neil@nmacleod.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The address of fp->path_name could be unaligned since seeking into the
device path buffer for a given node could end in byte boundary.
The fix is allocating aligned buffer by grub_malloc for holding the
UTF16 string copied from fp->path_name, and after using that buffer as
argument for grub_utf16_to_utf8 to convert it to UTF8 string.
[ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_get_filename':
[ 255s] ../../grub-core/kern/efi/efi.c:410:60: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 255s] 410 | p = (char *) grub_utf16_to_utf8 ((unsigned char *) p, fp->path_name, len);
[ 255s] | ~~^~~~~~~~~~~
[ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_print_device_path':
[ 255s] ../../grub-core/kern/efi/efi.c:900:33: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 255s] 900 | *grub_utf16_to_utf8 (buf, fp->path_name,
[ 255s] | ~~^~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The address of fp->path_name could be unaligned since seeking into the
device path buffer for a given node could end in byte boundary.
The fix is using aligned buffer allocated by grub_malloc for receiving
the converted UTF16 string by grub_utf8_to_utf16 and also the processing
after. The resulting string then gets copied to fp->path_name.
[ 243s] ../../grub-core/loader/efi/chainloader.c: In function 'copy_file_path':
[ 243s] ../../grub-core/loader/efi/chainloader.c:136:32: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 243s] 136 | size = grub_utf8_to_utf16 (fp->path_name, len * GRUB_MAX_UTF16_PER_UTF8,
[ 243s] | ~~^~~~~~~~~~~
[ 243s] ../../grub-core/loader/efi/chainloader.c:138:12: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 243s] 138 | for (p = fp->path_name; p < fp->path_name + size; p++)
[ 243s] | ^~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the
grub_usb_get_string function since the result is false postive. The
descstrp->str is found to be aligned in the buffer allocated for 'struct
grub_usb_desc_str'.
[ 229s] ../../grub-core/commands/usbtest.c: In function 'grub_usb_get_string':
[ 229s] ../../grub-core/commands/usbtest.c:104:58: error: taking address of packed member of 'struct grub_usb_desc_str' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 229s] 104 | *grub_utf16_to_utf8 ((grub_uint8_t *) *string, descstrp->str,
[ 229s] | ~~~~~~~~^~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The catkey->name could be unaligned since the address of 'void* record'
is calculated as offset in bytes to a malloc buffer.
The fix is using aligned buffer allocated by grub_malloc for holding
the UTF16 string copied from catkey->name. And use that buffer as
argument for grub_utf16_to_utf8 to convert to UTF8 strings.
In addition, using a new copy of buffer rather than catkey->name itself
for processing the endianess conversion, we can also get rid of the hunk
restoring byte order of catkey->name to what it was previously.
[ 59s] ../grub-core/fs/hfsplus.c: In function 'list_nodes':
[ 59s] ../grub-core/fs/hfsplus.c:738:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 738 | *grub_utf16_to_utf8 ((grub_uint8_t *) filename, catkey->name,
[ 59s] | ~~~~~~^~~~~~
[ 59s] ../grub-core/fs/hfsplus.c: In function 'grub_hfsplus_label':
[ 59s] ../grub-core/fs/hfsplus.c:1019:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 1019 | *grub_utf16_to_utf8 ((grub_uint8_t *) (*label), catkey->name,
[ 59s] | ~~~~~~^~~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the
grub_jfs_getent function since the result is found to be false postive.
The leaf is read into memory as continous chunks in size of 32 bytes and
the pointer to its base is aligned, which also guarentee its member
leaf->namepart is aligned.
[ 60s] ../grub-core/fs/jfs.c: In function 'grub_jfs_getent':
[ 60s] ../grub-core/fs/jfs.c:557:44: error: taking address of packed member of 'struct grub_jfs_leaf_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 60s] 557 | le_to_cpu16_copy (filename + strpos, leaf->namepart, len < diro->data->namecomponentlen ? len
[ 60s] | ~~~~^~~~~~~~~~
[ 60s] ../grub-core/fs/jfs.c:570:48: error: taking address of packed member of 'struct grub_jfs_leaf_next_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 60s] 570 | le_to_cpu16_copy (filename + strpos, next_leaf->namepart, len < 15 ? len : 15);
[ 60s] | ~~~~~~~~~^~~~~~~~~~
[ 60s] cc1: all warnings being treated as errors
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the
grub_cpio_find_file function since the result is found to be false
postive. Any pointers to member of the 'struct head hd' is aligned even
if the structure is packed without paddings.
[ 59s] In file included from ../grub-core/fs/cpio.c:51:
[ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
[ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
[ 59s] | ~~^~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
[ 59s] | ~~^~~~~
[ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] In file included from ../grub-core/fs/cpio_be.c:51:
[ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
[ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
[ 59s] | ~~^~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
[ 59s] | ~~^~~~~
[ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
[ 59s] | ~~^~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The UEFI specification allows LoadImage() to be called with a memory
location only and without a device path. In this case FilePath will not be
set in the EFI_LOADED_IMAGE_PROTOCOL.
So in function grub_efi_get_filename() the device path argument may be
NULL. As we cannot determine the device path in this case just return NULL
from the function.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Function grub_strndup() may return NULL, this is called from
function grub_ieee1275_get_devname() which is then called from
function grub_ieee1275_encode_devname() to set device. The device
variable could then be used with a NULL pointer.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously the setup_header length was just assumed to be the size of the
linux_kernel_params struct. The linux x86 32-bit boot protocol says that the
end of the linux_i386_kernel_header is at 0x202 + the byte value at 0x201 in
the linux_i386_kernel_header. So, calculate the size of the header using the
end of the linux_i386_kernel_header, rather than assume it is the size of the
linux_kernel_params struct.
Additionally, add some required members to the linux_kernel_params
struct and align the content of linux_i386_kernel_header struct with
it. New members naming was taken directly from Linux kernel source.
linux_kernel_params and linux_i386_kernel_header structs require more
cleanup. However, this is not urgent, so, let's do this after release.
Just in case...
Signed-off-by: Andrew Jeddeloh <andrew.jeddeloh@coreos.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Function grub_efi_find_last_device_path() may return NULL when called
from grub_efidisk_get_device_name().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Function grub_efi_find_last_device() path may return NULL when called
from is_child().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Function grub_efi_find_last_device_path() may return constant NULL when
called from find_parent_device().
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent versions of binutils dropped support for the a.out and COFF
formats on sparc64 targets. Since the boot loader on sparc64 is
supposed to be an a.out binary and the a.out header entries are
rather simple to calculate in our case, we just write the header
ourselves instead of relying on external tools to do that.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for SPARC target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
for clz) but for MIPS target.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
MIPS fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
PowerPC fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines) and ca0a4f689 (verifiers: File
type for fine-grained signature-verification controlling).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
IA-64 fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
In addition to what was already there, Gnulib's <intprops.h> needs SCHAR_MIN,
SCHAR_MAX, SHRT_MIN, INT_MIN, LONG_MIN, and LONG_MAX. Fixes build on CentOS 7.
Reported-by: "Chen, Farrah" <farrah.chen@intel.com>
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mirror behaviour of ELF loader in libxc: first look for Xen notes in
PT_NOTE segment, then in SHT_NOTE section and only then fallback to
a section with __xen_guest name. This fixes loading PV kernels that
Xen note have outside of PT_NOTE. While this may be result of a buggy
linker script, loading such kernel directly works fine, so make it work
with GRUB too. Specifically, this applies to binaries built from Unikraft.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Various GRUB utilities fail if the current directory doesn't exist,
because grub_find_device() chdirs to a different directory and then
fails when trying to chdir back. Gnulib's save-cwd module uses fchdir()
instead when it can, avoiding this category of problem.
Fixes Debian bug #918700.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mostly for cosmetic reasons, we add a "net_dhcp" command, which is (at the
moment) identical to the existing "net_bootp" command. Both actually trigger
a DHCP handshake now, and both should be able to deal with pure BOOTP servers.
We could think about dropping the DHCP options from the initial DISCOVER packet
when the user issues the net_bootp command, but it's unclear whether this is
really useful, as both protocols should be able to coexist.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Even though we were parsing some DHCP options sent by the server, so far
we are only using the BOOTP 2-way handshake, even when talking to a DHCP
server.
Change this by actually sending out DHCP DISCOVER packets instead of the
generic (mostly empty) BOOTP BOOTREQUEST packets.
A pure BOOTP server would ignore the extra DHCP options in the DISCOVER
packet and would just reply with a BOOTREPLY packet, which we also
handle in the code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In respone to a BOOTREQUEST packet a BOOTP server would answer with a BOOTREPLY
packet, which ends the conversation for good. DHCP uses a 4-way handshake,
where the initial server respone is an OFFER, which has to be answered with
REQUEST by the client again, only to be completed by an ACKNOWLEDGE packet
from the server.
Teach the grub_net_process_dhcp() function to deal with OFFER packets,
and treat ACK packets the same es BOOTREPLY packets.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The BOOTP RFC describes the boot file name and the server name as being part
of the integral BOOTP data structure, with some limits on the size of them.
DHCP extends this by allowing them to be separate DHCP options, which is more
flexible.
Teach the code dealing with those fields to check for those DHCP options first
and use this information, if provided. We fall back to using the BOOTP
information if those options are not used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently we have a global timeout for all network cards in the BOOTP/DHCP
discovery process.
Make this timeout a per-interface one, so better accommodate the upcoming
4-way DHCP handshake and to also cover the lease time limit a DHCP offer
will come with.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Change the interface of the function dealing with incoming BOOTP packets
to take an interface instead of a card, to allow more fine per-interface
state (timeout, handshake state) later on.
Use the opportunity to clean up the code a bit.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In contrast to BOOTP, DHCP uses a 4-way handshake, so requires to send
packets more often.
Refactor the generation and sending of the BOOTREQUEST packet into
a separate function, so that future code can more easily reuse this.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
DHCP specifies a special dummy option OVERLOAD, to allow DHCP options to
spill over into the (legacy) BOOTFILE and SNAME fields.
Parse and handle this option properly.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For proper DHCP support we will need to parse DHCP options from a packet
more often and at various places.
Refactor the option parsing into a new function, which will scan a packet to
find *a particular* option field. Use that new function in places where we
were dealing with DHCP options before.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The comment is right, the "giaddr" fields holds the IP address of the BOOTP
relay, not a general purpose router address. Just remove the commented code,
archeologists can find it in the git history.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In order to be able to read from and write to model-specific registers,
two new modules are added. They are i386 specific, as the cpuid module.
rdmsr module registers the command rdmsr that allows reading from a MSR.
wrmsr module registers the command wrmsr that allows writing to a MSR.
wrmsr module is disabled if UEFI secure boot is enabled.
Please note that on SMP systems, interacting with a MSR that has a scope
per hardware thread, implies that the value only applies to the
particular cpu/core/thread that ran the command.
Also, if you specify a reserved or unimplemented MSR address, it will
cause a general protection exception (which is not currently being
handled) and the system will reboot.
Signed-off-by: Jesús Diéguez Fernández <jesusdf@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In order to maintain the coding style consistency, it was requested to
replace the methods that use "__asm__ __volatile__" with "asm volatile".
Signed-off-by: Jesús Diéguez Fernández <jesusdf@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new disk driver called obdisk for IEEE1275 platforms. Currently
the only platform using this disk driver is SPARC, however other IEEE1275
platforms could start using it if they so choose. While the functionality
within the current IEEE1275 ofdisk driver may be suitable for PPC and x86, it
presented too many problems on SPARC hardware.
Within the old ofdisk, there is not a way to determine the true canonical
name for the disk. Within Open Boot, the same disk can have multiple names
but all reference the same disk. For example the same disk can be referenced
by its SAS WWN, using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@w5000cca02f037d6d,0
It can also be referenced by its PHY identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p0
It can also be referenced by its Target identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@0
Also, when the LUN=0, it is legal to omit the ,0 from the device name. So with
the disk above, before taking into account the device aliases, there are 6 ways
to reference the same disk.
Then it is possible to have 0 .. n device aliases all representing the same disk.
Within this new driver the true canonical name is determined using the the
IEEE1275 encode-unit and decode-unit commands when address_cells == 4. This
will determine the true single canonical name for the device so multiple ihandles
are not opened for the same device. This is what frequently happens with the old
ofdisk driver. With some devices when they are opened multiple times it causes
the entire system to hang.
Another problem solved with this driver is devices that do not have a device
alias can be booted and used within GRUB. Within the old ofdisk, this was not
possible, unless it was the original boot device. All devices behind a SAS
or SCSI parent can be found. Within the old ofdisk, finding these disks
relied on there being an alias defined. The alias requirement is not
necessary with this new driver. It can also find devices behind a parent
after they have been hot-plugged. This is something that is not possible
with the old ofdisk driver.
The old ofdisk driver also incorrectly assumes that the device pointing to by a
device alias is in its true canonical form. This assumption is never made with
this new driver.
Another issue solved with this driver is that it properly caches the ihandle
for all open devices. The old ofdisk tries to do this by caching the last
opened ihandle. However this does not work properly because the layer above
does not use a consistent device name for the same disk when calling into the
driver. This is because the upper layer uses the bootpath value returned within
/chosen, other times it uses the device alias, and other times it uses the
value within grub.cfg. It does not have a way to figure out that these devices
are the same disk. This is not a problem with this new driver.
Due to the way GRUB repeatedly opens and closes the same disk. Caching the
ihandle is important on SPARC. Without caching, some SAS devices can take
15 - 20 minutes to get to the GRUB menu. This ihandle caching is not possible
without correctly having the canonical disk name.
When available, this driver also tries to use the deblocker #blocks and
a way of determining the disk size.
Finally and probably most importantly, this new driver is also capable of
seeing all partitions on a GPT disk. With the old driver, the GPT
partition table can not be read and only the first partition on the disk
can be seen.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Upgrade Gnulib files to 20190105.
It's much easier to maintain GRUB's use of portability support files
from Gnulib when the process is automatic and driven by a single
configuration file, rather than by maintainers occasionally running
gnulib-tool and committing the result. Removing these
automatically-copied files from revision control also removes the
temptation to hack the output in ways that are difficult for future
maintainers to follow. Gnulib includes a "bootstrap" program which is
designed for this.
The canonical way to bootstrap GRUB from revision control is now
"./bootstrap", but "./autogen.sh" is still useful if you just want to
generate the GRUB-specific parts of the build system.
GRUB now requires Autoconf >= 2.63 and Automake >= 1.11, in line with
Gnulib.
Gnulib source code is now placed in grub-core/lib/gnulib/ (which should
not be edited directly), and GRUB's patches are in
grub-core/lib/gnulib-patches/. I've added a few notes to the developer
manual on how to maintain this.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
syslinux_parse simplifies some filenames by removing things like ".."
segments, but the tests assumed that @abs_top_srcdir@ would be
untouched, which is not true in the case of out-of-tree builds where
@abs_top_srcdir@ may contain ".." segments.
Performing the substitution requires some awkwardness in Makefile.am due
to details of how config.status works.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many of GRUB's utilities don't check anywhere near all the possible
write errors. For example, if grub-install runs out of space when
copying a file, it won't notice. There were missing checks for the
return values of write, fflush, fsync, and close (or the equivalents on
other OSes), all of which must be checked.
I tried to be consistent with the existing logging practices of the
various hostdisk implementations, but they weren't entirely consistent
to start with so I used my judgement. The result at least looks
reasonable on GNU/Linux when I provoke a write error:
Installing for x86_64-efi platform.
grub-install: error: cannot copy `/usr/lib/grub/x86_64-efi-signed/grubx64.efi.signed' to `/boot/efi/EFI/debian/grubx64.efi': No space left on device.
There are more missing checks in other utilities, but this should fix
the most critical ones.
Fixes Debian bug #922741.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For EBR partitions, "start" is the relative starting sector of the EBR
header itself, whereas "offset" is the relative starting byte of the
partition's contents, excluding the EBR header and any padding. Thus we
must use "offset", and divide by the sector size to convert to sectors.
Fixes Debian bug #923253.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d52.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_efi_get_ram_base() looks for the lowest available RAM address by
traversing the memory map, comparing lowest address found so far.
Due to a brain glitch, that "so far" was initialized to GRUB_UINT_MAX -
completely preventing boot on systems without RAM below 4GB.
Change the initial value to GRUB_EFI_MAX_USABLE_ADDRESS, as originally
intended.
Reported-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
