mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-31 08:28:13 +00:00
Code Issues Releases Wiki Activity
linux-stable/arch/arm/mm/Makefile

112 lines
3.9 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Makefile for the linux arm-specific parts of the memory manager.
#
ARM: NOMMU: Introduce dma operations for noMMU R/M classes of cpus can have memory covered by MPU which in turn might configure RAM as Normal i.e. bufferable and cacheable. It breaks dma_alloc_coherent() and friends, since data can stuck in caches now or be buffered. This patch factors out DMA support for NOMMU configuration into separate entity which provides dedicated dma_ops. We have to handle there several cases: - configurations with MMU/MPU setup - configurations without MMU/MPU setup - special case for M-class, since caches and MPU there are optional In general we rely on default DMA area for coherent allocations or/and per-device memory reserves suitable for coherent DMA, so if such regions are set coherent allocations go from there. In case MMU/MPU was not setup we fallback to normal page allocator for DMA memory allocation. In case we run M-class cpus, for configuration without cache support (like Cortex-M3/M4) dma operations are forced to be coherent and wired with dma-noop (such decision is made based on cacheid global variable); however, if caches are detected there and no DMA coherent region is given (either default or per-device), dma is disallowed even MPU is not set - it is because M-class implement system memory map which defines part of address space as Normal memory. Reported-by: Alexandre Torgue <alexandre.torgue@st.com> Reported-by: Andras Szemzo <sza@esh.hu> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [hch: removed the dma_supported() implementation that isn't required anymore] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-24 10:24:30 +00:00
obj-y := extable.o fault.o init.o iomap.o
obj-y += dma-mapping$(MMUEXT).o
ARM: pgtable: collect up identity mapping functions We have two places where we create identity mappings - one when we bring secondary CPUs online, and one where we setup some mappings for soft- reboot. Combine these two into a single implementation. Also collect the identity mapping deletion function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21 11:41:57 +00:00
obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \
ARM: 8238/1: mm: Refine set_memory_* functions set_memory_* functions have same implementation except memory attribute. This patch makes to use common function for these, and pull out the functions into arch/arm/mm/pageattr.c like arm64 did. It will reduce code size and enhance the readability. Signed-off-by: Jungseung Lee <js07.lee@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-29 02:02:11 +00:00
mmap.o pgd.o mmu.o pageattr.o
[ARM] nommu: add stubs for ioremap and friends nommu doesn't have any form of remapping support, so ioremap, etc become stubs which just return the casted address, doing nothing else. Move ioport_map(), ioport_unmap(), pci_iomap(), pci_iounmap() into a separate file which is always built. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 14:05:36 +00:00
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
ARM: 8706/1: NOMMU: Move out MPU setup in separate module Having MPU handling code in dedicated module makes it easier to enhance/maintain it. Tested-by: Szemző András <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-16 11:52:35 +00:00
obj-$(CONFIG_ARM_MPU) += pmsa-v7.o
[ARM] nommu: add stubs for ioremap and friends nommu doesn't have any form of remapping support, so ioremap, etc become stubs which just return the casted address, doing nothing else. Move ioport_map(), ioport_unmap(), pci_iomap(), pci_iounmap() into a separate file which is always built. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 14:05:36 +00:00
endif
ARM: add support to dump the kernel page tables This patch allows the kernel page tables to be dumped via a debugfs file, allowing kernel developers to check the layout of the kernel page tables and the verify the various permissions and type settings. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-23 15:13:02 +00:00
obj-$(CONFIG_ARM_PTDUMP) += dump.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_MODULES) += proc-syms.o
ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys calls. The goal is to catch users who are calling virt_to_phys on non-linear addresses immediately. This includes caller using __virt_to_phys() on image addresses instead of __pa_symbol(). This is a generally useful debug feature to spot bad code (particulary in drivers). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-15 02:59:00 +00:00
obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
[ARM] kmap support The kmap virtual area borrows a 2MB range at the top of the 16MB area below PAGE_OFFSET currently reserved for kernel modules and/or the XIP kernel. This 2MB corresponds to the range covered by 2 consecutive second-level page tables, or a single pmd entry as seen by the Linux page table abstraction. Because XIP kernels are unlikely to be seen on systems needing highmem support, there shouldn't be any shortage of VM space for modules (14 MB for modules is still way more than twice the typical usage). Because the virtual mapping of highmem pages can go away at any moment after kunmap() is called on them, we need to bypass the delayed cache flushing provided by flush_dcache_page() in that case. The atomic kmap versions are based on fixmaps, and __cpuc_flush_dcache_page() is used directly in that case. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-09-15 20:44:55 +00:00
obj-$(CONFIG_HIGHMEM) += highmem.o
ARM: mm: HugeTLB support for LPAE systems. This patch adds support for hugetlbfs based on the x86 implementation. It allows mapping of 2MB sections (see Documentation/vm/hugetlbpage.txt for usage). The 64K pages configuration is not supported (section size is 512MB in this case). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [steve.capper@linaro.org: symbolic constants replace numbers in places. Split up into multiple files, to simplify future non-LPAE support, removed huge_pmd_share code, as this is very rarely executed, Added PROT_NONE support]. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-25 13:32:38 +00:00
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
ARM: re-implement physical address space switching Re-implement the physical address space switching to be architecturally compliant. This involves flushing the caches, disabling the MMU, and only then updating the page tables. Once that is complete, the system can be brought back up again. Since we disable the MMU, we need to do the update in assembly code. Luckily, the entries which need updating are fairly trivial, and are all setup by the early assembly code. We can merely adjust each entry by the delta required. Not only does this fix the code to be architecturally compliant, but it fixes a couple of bugs too: 1. The original code would only ever update the first L2 entry covering a fraction of the kernel; the remainder were left untouched. 2. The L2 entries covering the DTB blob were likewise untouched. This solution fixes up all entries. Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-04 15:58:38 +00:00
obj-$(CONFIG_ARM_PV_FIXUP) += pv-fixup-asm.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores. There is no FSR/FAR register on no-CP15 or MPU cores. This patch adds a dummy abort handler which returns zero for the base restored Data Abort model !CPU_CP15_MMU cores. The abort-lv4t.S is still used with the fix-up for the base updated Data Abort model cores. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 12:46:16 +00:00
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o
obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o
obj-$(CONFIG_CPU_ABRT_EV5T) += abort-ev5t.o
obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
[ARM] armv7: add Makefile and Kconfig entries This patch adds the necessary lines to the Makefile and Kconfig files for enabling the compilation of the ARMv7 CPU support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08 21:45:26 +00:00
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12 19:02:05 +00:00
AFLAGS_abort-ev6.o :=-Wa,-march=armv6k
AFLAGS_abort-ev7.o :=-Wa,-march=armv7-a
ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-25 12:39:47 +00:00
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
[ARM] armv7: add Makefile and Kconfig entries This patch adds the necessary lines to the Makefile and Kconfig files for enabling the compilation of the ARMv7 CPU support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08 21:45:26 +00:00
obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
ARM: Add support for FA526 v2 Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 11:10:01 +00:00
obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
ARM: ARMv7-M: Allow the building of new kernel port This patch modifies the required Kconfig and Makefile files to allow the building of kernel for Cortex-M3. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-03-21 20:02:37 +00:00
obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o
ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support. This patch does the plumbing required to invoke the V7M cache code added in earlier patches in this series, although there is no users for that yet. In order to honour the I/D cache disable config options, this patch changes the mechanism by which the CCR is set on boot, to be more like V7A/R. Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-30 16:31:22 +00:00
obj-$(CONFIG_CPU_CACHE_V7M) += cache-v7m.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12 19:02:05 +00:00
AFLAGS_cache-v6.o :=-Wa,-march=armv6
AFLAGS_cache-v7.o :=-Wa,-march=armv7-a
ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support. This patch does the plumbing required to invoke the V7M cache code added in earlier patches in this series, although there is no users for that yet. In order to honour the I/D cache disable config options, this patch changes the mechanism by which the CCR is set on boot, to be more like V7A/R. Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-30 16:31:22 +00:00
AFLAGS_cache-v7m.o :=-Wa,-march=armv7-m
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12 19:02:05 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
[ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() This patch implements a set of Feroceon-specific {copy,clear}_user_page() routines that perform more optimally than the generic implementations. This also deals with write-allocate caches (Feroceon can run L1 D in WA mode) which otherwise prevents Linux from booting. [nico: optimized the code even further] Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-04-24 05:31:45 +00:00
obj-$(CONFIG_CPU_COPY_FEROCEON) += copypage-feroceon.o
[ARM] Move mmu.c out of the way Rename mmu.c to context.c - it's the ARMv6 ASID context handling code rather than generic "mmu" handling code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-21 18:23:38 +00:00
obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
[ARM] 3377/2: add support for intel xsc3 core Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 20:00:40 +00:00
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
ARM: Add support for FA526 v2 Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 11:10:01 +00:00
obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ARM: 8381/1: fix ARMv4+Feroceon multiplatform build The feroceon copypage implementation cannot be built when targetting an ARMv4 CPU, so we need to pass the march=armv5te flag manually to gcc when building this file. This is obviously safe since that code will not be executed on ARMv4. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-26 15:10:02 +00:00
CFLAGS_copypage-feroceon.o := -march=armv5te
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
[ARM] Feroceon: L2 cache support This patch adds support for the unified Feroceon L2 cache controller as found in e.g. the Marvell Kirkwood and Marvell Discovery Duo families of ARM SoCs. Note that: - Page table walks are outer uncacheable on Kirkwood and Discovery Duo, since the ARMv5 spec provides no way to indicate outer cacheability of page table walks (specifying it in TTBR[4:3] is an ARMv6+ feature). This requires adding L2 cache clean instructions to proc-feroceon.S (dcache_clean_area(), set_pte()) as well as to tlbflush.h ({flush,clean}_pmd_entry()). The latter case is handled by defining a new TLB type (TLB_FEROCEON) which is almost identical to the v4wbi one but provides a TLB_L2CLEAN_FR flag. - The Feroceon L2 cache controller supports L2 range (i.e. 'clean L2 range by MVA' and 'invalidate L2 range by MVA') operations, and this patch uses those range operations for all Linux outer cache operations, as they are faster than the regular per-line operations. L2 range operations are not interruptible on this hardware, which avoids potential livelock issues, but can be bad for interrupt latency, so there is a compile-time tunable (MAX_RANGE_SIZE) which allows you to select the maximum range size to operate on at once. (Valid range is between one cache line and one 4KiB page, and must be a multiple of the line size.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 20:45:04 +00:00
obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
[ARM] 4394/1: ARMv7: Add the TLB range operations We are currently using the ARMv6 operations but need to duplicate some of the code because of the introduction of the new CPU barrier instructions in ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-18 10:25:31 +00:00
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
ARM: Add support for FA526 v2 Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 11:10:01 +00:00
obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12 19:02:05 +00:00
AFLAGS_tlb-v6.o :=-Wa,-march=armv6
AFLAGS_tlb-v7.o :=-Wa,-march=armv7-a
[ARM] nommu: add ARM7TDMI core support This patch adds ARM7TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26 08:37:36 +00:00
obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
[ARM] nommu: add ARM740T core support This patch adds ARM740T core support which has a MPU and 4KB or 8KB cache. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26 08:37:50 +00:00
obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o
[ARM] nommu: add ARM9TDMI core support This patch adds ARM9TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26 08:38:05 +00:00
obj-$(CONFIG_CPU_ARM9TDMI) += proc-arm9tdmi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o
obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o
obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
[ARM] nommu: add ARM940T core support This patch adds ARM940T core support which has 4KB D-cache, 4KB I-cache and a MPU. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26 08:38:18 +00:00
obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
[ARM] nommu: add ARM946E-S core support This patch adds ARM946E-S core support which has typically 8KB I&D cache. It has a MPU and supports ARMv5TE instruction set. Because the ARM946E-S core can be synthesizable with various cache size, CONFIG_CPU_DCACHE_SIZE is defined for vendor specific configurations. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26 08:38:32 +00:00
obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
ARM: Add support for FA526 v2 Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 11:10:01 +00:00
obj-$(CONFIG_CPU_FA526) += proc-fa526.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o
obj-$(CONFIG_CPU_SA110) += proc-sa110.o
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
[ARM] 3377/2: add support for intel xsc3 core Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 20:00:40 +00:00
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 06:15:18 +00:00
obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
[ARM] Marvell Feroceon CPU core support The Feroceon is a family of independent ARMv5TE compliant CPU core implementations, supporting a variable depth pipeline and out-of-order execution. The Feroceon is configurable with VFP support, and the later models in the series are superscalar with up to two instructions per clock cycle. This patch adds the initial low-level cache/TLB handling for this core. Signed-off-by: Assaf Hoffman <hoffman@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Reviewed-by: Nicolas Pitre <nico@marvell.com> Reviewed-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-23 19:14:41 +00:00
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
[ARM] 3168/1: Update ARM signal delivery and masking Patch from Daniel Jacobowitz After delivering a signal (creating its stack frame) we must check for additional pending unblocked signals before returning to userspace. Otherwise signals may be delayed past the next syscall or reschedule. Once that was fixed it became obvious that the ARM signal mask manipulation was broken. It was a little bit broken before the recent SA_NODEFER changes, and then very broken after them. We must block the requested signals before starting the handler or the same signal can be delivered again before the handler even gets a chance to run. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19 10:01:07 +00:00
obj-$(CONFIG_CPU_V6) += proc-v6.o
ARM: v6k: introduce CPU_V6K option Introduce a CPU_V6K configuration option for platforms to select if they have a V6K CPU core. This allows us to identify whether we need to support ARMv6 CPUs without the V6K SMP extensions at build time. Currently CPU_V6K is just an alias for CPU_V6, and all places which reference CPU_V6 are replaced by (CPU_V6 || CPU_V6K). Select CPU_V6K from platforms which are known to be V6K-only. Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-17 15:08:32 +00:00
obj-$(CONFIG_CPU_V6K) += proc-v6.o
[ARM] armv7: add Makefile and Kconfig entries This patch adds the necessary lines to the Makefile and Kconfig files for enabling the compilation of the ARMv7 CPU support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08 21:45:26 +00:00
obj-$(CONFIG_CPU_V7) += proc-v7.o
ARM: ARMv7-M: Allow the building of new kernel port This patch modifies the required Kconfig and Makefile files to allow the building of kernel for Cortex-M3. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-03-21 20:02:37 +00:00
obj-$(CONFIG_CPU_V7M) += proc-v7m.o
[ARM] 4135/1: Add support for the L210/L220 cache controllers This patch adds the support for the L210/L220 (outer) cache controller. The cache range operations are done by index/way since L2 cache controller only accepts physical addresses. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-05 13:48:19 +00:00
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12 19:02:05 +00:00
AFLAGS_proc-v6.o :=-Wa,-march=armv6
AFLAGS_proc-v7.o :=-Wa,-march=armv7-a
ARM: outer cache: add WARN_ON() to outer_disable() Add WARN_ON() conditions to outer_disable() to ensure that its requirements aren't violated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-16 13:14:38 +00:00
obj-$(CONFIG_OUTER_CACHE) += l2c-common.o
[ARM] Feroceon: L2 cache support This patch adds support for the unified Feroceon L2 cache controller as found in e.g. the Marvell Kirkwood and Marvell Discovery Duo families of ARM SoCs. Note that: - Page table walks are outer uncacheable on Kirkwood and Discovery Duo, since the ARMv5 spec provides no way to indicate outer cacheability of page table walks (specifying it in TTBR[4:3] is an ARMv6+ feature). This requires adding L2 cache clean instructions to proc-feroceon.S (dcache_clean_area(), set_pte()) as well as to tlbflush.h ({flush,clean}_pmd_entry()). The latter case is handled by defining a new TLB type (TLB_FEROCEON) which is almost identical to the v4wbi one but provides a TLB_L2CLEAN_FR flag. - The Feroceon L2 cache controller supports L2 range (i.e. 'clean L2 range by MVA' and 'invalidate L2 range by MVA') operations, and this patch uses those range operations for all Linux outer cache operations, as they are faster than the regular per-line operations. L2 range operations are not interruptible on this hardware, which avoids potential livelock issues, but can be bad for interrupt latency, so there is a compile-time tunable (MAX_RANGE_SIZE) which allows you to select the maximum range size to operate on at once. (Valid range is between one cache line and one 4KiB page, and must be a multiple of the line size.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 20:45:04 +00:00
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
ARM: l2c: provide common PL310 early resume code Provide a common assembly implementation for PL310 resume code. Certain platforms need to re-initialise the L2C cache early as it may preserve data across a S2RAM cycle, and therefore must be enabled along with the L1 cache and MMU. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-05 10:39:57 +00:00
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o
ARM: 8611/1: l2x0: add PMU support The L2C-220 (AKA L220) and L2C-310 (AKA PL310) cache controllers feature a Performance Monitoring Unit (PMU), which can be useful for tuning and/or debugging. This hardware is always present and the relevant registers are accessible to non-secure accesses. Thus, no special firmware interface is necessary. This patch adds support for the PMU, plugging into the usual perf infrastructure. The overflow interrupt is not always available (e.g. on RealView PBX A9 it is not wired up at all), and the hardware counters saturate, so the driver does not make use of this. Instead, the driver periodically polls and reset counters as required to avoid losing events due to saturation. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Kim Phillips <kim.phillips@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-02 09:35:18 +00:00
obj-$(CONFIG_CACHE_L2X0_PMU) += cache-l2x0-pmu.o
[ARM] pxa: add support for L2 outer cache on XScale3 The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 08:34:03 +00:00
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
ARM: Add Tauros2 L2 cache controller support Support for the Tauros2 L2 cache controller as used with the PJ1 and PJ4 CPUs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-24 17:33:52 +00:00
obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
ARM: uniphier: add outer cache support This commit adds support for UniPhier outer cache controller. All the UniPhier SoCs are equipped with the L2 cache, while the L3 cache is currently only integrated on PH1-Pro5 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-02 04:42:19 +00:00
obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o
Reference in a new issue Copy permalink