linux-stable/arch/riscv/Makefile

202 lines
6.2 KiB
Makefile
Raw Normal View History

# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
riscv: Allow to downgrade paging mode from the command line Add 2 early command line parameters that allow to downgrade satp mode (using the same naming as x86): - "no5lvl": use a 4-level page table (down from sv57 to sv48) - "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39) Note that going through the device tree to get the kernel command line works with ACPI too since the efi stub creates a device tree anyway with the command line. In KASAN kernels, we can't use the libfdt that early in the boot process since we are not ready to execute instrumented functions. So instead of using the "generic" libfdt, we compile our own versions of those functions that are not instrumented and that are prefixed so that they do not conflict with the generic ones. We also need the non-instrumented versions of the string functions and the prefixed versions of memcpy/memmove. This is largely inspired by commit aacd149b6238 ("arm64: head: avoid relocating the kernel twice for KASLR") from which I removed compilation flags that were not relevant to RISC-V at the moment (LTO, SCS). Also note that we have to link with -z norelro to avoid ld.lld to throw a warning with the new .got sections, like in commit 311bea3cb9ee ("arm64: link with -z norelro for LLD or aarch64-elf"). Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230424092313.178699-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-04-24 09:23:13 +00:00
LDFLAGS_vmlinux := -z norelro
ifeq ($(CONFIG_RELOCATABLE),y)
riscv: Allow to downgrade paging mode from the command line Add 2 early command line parameters that allow to downgrade satp mode (using the same naming as x86): - "no5lvl": use a 4-level page table (down from sv57 to sv48) - "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39) Note that going through the device tree to get the kernel command line works with ACPI too since the efi stub creates a device tree anyway with the command line. In KASAN kernels, we can't use the libfdt that early in the boot process since we are not ready to execute instrumented functions. So instead of using the "generic" libfdt, we compile our own versions of those functions that are not instrumented and that are prefixed so that they do not conflict with the generic ones. We also need the non-instrumented versions of the string functions and the prefixed versions of memcpy/memmove. This is largely inspired by commit aacd149b6238 ("arm64: head: avoid relocating the kernel twice for KASLR") from which I removed compilation flags that were not relevant to RISC-V at the moment (LTO, SCS). Also note that we have to link with -z norelro to avoid ld.lld to throw a warning with the new .got sections, like in commit 311bea3cb9ee ("arm64: link with -z norelro for LLD or aarch64-elf"). Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230424092313.178699-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-04-24 09:23:13 +00:00
LDFLAGS_vmlinux += -shared -Bsymbolic -z notext --emit-relocs
KBUILD_CFLAGS += -fPIE
endif
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
LDFLAGS_vmlinux += --no-relax
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
ifeq ($(CONFIG_RISCV_ISA_C),y)
CC_FLAGS_FTRACE := -fpatchable-function-entry=4
riscv: ftrace: Reduce the detour code size to half Use a temporary register to reduce the size of detour code from 16 bytes to 8 bytes. The previous implementation is from 'commit afc76b8b8011 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'. Before the patch: <func_prolog>: 0: REG_S ra, -SZREG(sp) 4: auipc ra, ? 8: jalr ?(ra) 12: REG_L ra, -SZREG(sp) (func_boddy) After the patch: <func_prolog>: 0: auipc t0, ? 4: jalr t0, ?(t0) (func_boddy) This patch not just reduces the size of detour code, but also fixes an important issue: An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can actually change the instruction pointer, e.g. to "replace" the given kernel function with a new one, which is needed for livepatching, etc. In this case, the trampoline (ftrace_regs_caller) would not return to <func_prolog+12> but would rather jump to the new function. So, "REG_L ra, -SZREG(sp)" would not run and the original return address would not be restored. The kernel is likely to hang or crash as a result. This can be easily demonstrated if one tries to "replace", say, cmdline_proc_show() with a new function with the same signature using instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace callback. Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/ Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/ Co-developed-by: Song Shuai <suagrfillet@gmail.com> Signed-off-by: Song Shuai <suagrfillet@gmail.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: Evgenii Shatokhin <e.shatokhin@yadro.com> Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org Cc: stable@vger.kernel.org Fixes: 10626c32e382 ("riscv/ftrace: Add basic support") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-01-12 09:05:59 +00:00
else
CC_FLAGS_FTRACE := -fpatchable-function-entry=2
endif
endif
ifeq ($(CONFIG_CMODEL_MEDLOW),y)
KBUILD_CFLAGS_MODULE += -mcmodel=medany
endif
export BITS
ifeq ($(CONFIG_ARCH_RV64I),y)
BITS := 64
UTS_MACHINE := riscv64
KBUILD_CFLAGS += -mabi=lp64
KBUILD_AFLAGS += -mabi=lp64
KBUILD_LDFLAGS += -melf64lriscv
else
BITS := 32
UTS_MACHINE := riscv32
KBUILD_CFLAGS += -mabi=ilp32
KBUILD_AFLAGS += -mabi=ilp32
KBUILD_LDFLAGS += -melf32lriscv
endif
ifndef CONFIG_RISCV_USE_LINKER_RELAXATION
KBUILD_CFLAGS += -mno-relax
KBUILD_AFLAGS += -mno-relax
ifndef CONFIG_AS_IS_LLVM
KBUILD_CFLAGS += -Wa,-mno-relax
KBUILD_AFLAGS += -Wa,-mno-relax
endif
# LLVM has an issue with target-features and LTO: https://github.com/llvm/llvm-project/issues/59350
# Ensure it is aware of linker relaxation with LTO, otherwise relocations may
# be incorrect: https://github.com/llvm/llvm-project/issues/65090
else ifeq ($(CONFIG_LTO_CLANG),y)
KBUILD_LDFLAGS += -mllvm -mattr=+c -mllvm -mattr=+relax
endif
ifeq ($(CONFIG_SHADOW_CALL_STACK),y)
KBUILD_LDFLAGS += --no-relax-gp
endif
# ISA string setting
riscv-march-$(CONFIG_ARCH_RV32I) := rv32ima
riscv-march-$(CONFIG_ARCH_RV64I) := rv64ima
riscv-march-$(CONFIG_FPU) := $(riscv-march-y)fd
riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c
riscv-march-$(CONFIG_RISCV_ISA_V) := $(riscv-march-y)v
riscv: Handle zicsr/zifencei issues between clang and binutils There are two related issues that appear in certain combinations with clang and GNU binutils. The first occurs when a version of clang that supports zicsr or zifencei via '-march=' [1] (i.e, >= 17.x) is used in combination with a version of GNU binutils that do not recognize zicsr and zifencei in the '-march=' value (i.e., < 2.36): riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei' riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei' riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o The second occurs when a version of clang that does not support zicsr or zifencei via '-march=' (i.e., <= 16.x) is used in combination with a version of GNU as that defaults to a newer ISA base spec, which requires specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >= 2.38): ../arch/riscv/kernel/kexec_relocate.S: Assembler messages: ../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required clang-12: error: assembler command failed with exit code 1 (use -v to see invocation) This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix build with binutils 2.38") (see [2] for additional information) but older versions of clang miss out on it because the cc-option check fails: clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr' clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr' To resolve the first issue, only attempt to add zicsr and zifencei to the march string when using the GNU assembler 2.38 or newer, which is when the default ISA spec was updated, requiring these extensions to be specified explicitly. LLVM implements an older version of the base specification for all currently released versions, so these instructions are available as part of the 'i' extension. If LLVM's implementation is updated in the future, a CONFIG_AS_IS_LLVM condition can be added to CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI. To resolve the second issue, use version 2.2 of the base ISA spec when using an older version of clang that does not support zicsr or zifencei via '-march=', as that is the spec version most compatible with the one clang/LLVM implements and avoids the need to specify zicsr and zifencei explicitly due to still being a part of 'i'. [1]: https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16 [2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/ Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1808 Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-13 23:00:23 +00:00
ifdef CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC
KBUILD_CFLAGS += -Wa,-misa-spec=2.2
KBUILD_AFLAGS += -Wa,-misa-spec=2.2
else
riscv-march-$(CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI) := $(riscv-march-y)_zicsr_zifencei
endif
# Check if the toolchain supports Zihintpause extension
riscv-march-$(CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE) := $(riscv-march-y)_zihintpause
# Remove F,D,V from isa string for all. Keep extensions between "fd" and "v" by
# matching non-v and non-multi-letter extensions out with the filter ([^v_]*)
KBUILD_CFLAGS += -march=$(shell echo $(riscv-march-y) | sed -E 's/(rv32ima|rv64ima)fd([^v_]*)v?/\1\2/')
KBUILD_AFLAGS += -march=$(riscv-march-y)
KBUILD_CFLAGS += -mno-save-restore
KBUILD_CFLAGS += -DCONFIG_PAGE_OFFSET=$(CONFIG_PAGE_OFFSET)
ifeq ($(CONFIG_CMODEL_MEDLOW),y)
KBUILD_CFLAGS += -mcmodel=medlow
endif
ifeq ($(CONFIG_CMODEL_MEDANY),y)
KBUILD_CFLAGS += -mcmodel=medany
endif
# Avoid generating .eh_frame sections.
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
# The RISC-V attributes frequently cause compatibility issues and provide no
# information, so just turn them off.
KBUILD_CFLAGS += $(call cc-option,-mno-riscv-attribute)
KBUILD_AFLAGS += $(call cc-option,-mno-riscv-attribute)
KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mno-arch-attr)
KBUILD_AFLAGS += $(call as-option,-Wa$(comma)-mno-arch-attr)
KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax)
# GCC versions that support the "-mstrict-align" option default to allowing
# unaligned accesses. While unaligned accesses are explicitly allowed in the
# RISC-V ISA, they're emulated by machine mode traps on all extant
# architectures. It's faster to have GCC emit only aligned accesses.
ifneq ($(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS),y)
KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
endif
riscv: Enable per-task stack canaries This enables the use of per-task stack canary values if GCC has support for emitting the stack canary reference relative to the value of tp, which holds the task struct pointer in the riscv kernel. After compare arm64 and x86 implementations, seems arm64's is more flexible and readable. The key point is how gcc get the offset of stack_canary from gs/el0_sp. x86: Use a fix offset from gs, not flexible. struct fixed_percpu_data { /* * GCC hardcodes the stack canary as %gs:40. Since the * irq_stack is the object at %gs:0, we reserve the bottom * 48 bytes of the irq stack for the canary. */ char gs_base[40]; // :( unsigned long stack_canary; }; arm64: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=xxx riscv: Use -mstack-protector-guard-offset & guard-reg gcc options: -mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=xxx GCC's implementation has been merged: commit c931e8d5a96463427040b0d11f9c4352ac22b2b0 Author: Cooper Qu <cooper.qu@linux.alibaba.com> Date: Mon Jul 13 16:15:08 2020 +0800 RISC-V: Add support for TLS stack protector canary access In the end, these codes are inserted by gcc before return: * 0xffffffe00020b396 <+120>: ld a5,1008(tp) # 0x3f0 * 0xffffffe00020b39a <+124>: xor a5,a5,a4 * 0xffffffe00020b39c <+126>: mv a0,s5 * 0xffffffe00020b39e <+128>: bnez a5,0xffffffe00020b61c <_do_fork+766> 0xffffffe00020b3a2 <+132>: ld ra,136(sp) 0xffffffe00020b3a4 <+134>: ld s0,128(sp) 0xffffffe00020b3a6 <+136>: ld s1,120(sp) 0xffffffe00020b3a8 <+138>: ld s2,112(sp) 0xffffffe00020b3aa <+140>: ld s3,104(sp) 0xffffffe00020b3ac <+142>: ld s4,96(sp) 0xffffffe00020b3ae <+144>: ld s5,88(sp) 0xffffffe00020b3b0 <+146>: ld s6,80(sp) 0xffffffe00020b3b2 <+148>: ld s7,72(sp) 0xffffffe00020b3b4 <+150>: addi sp,sp,144 0xffffffe00020b3b6 <+152>: ret ... * 0xffffffe00020b61c <+766>: auipc ra,0x7f8 * 0xffffffe00020b620 <+770>: jalr -1764(ra) # 0xffffffe000a02f38 <__stack_chk_fail> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Cooper Qu <cooper.qu@linux.alibaba.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-17 16:29:18 +00:00
ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
prepare: stack_protector_prepare
stack_protector_prepare: prepare0
$(eval KBUILD_CFLAGS += -mstack-protector-guard=tls \
-mstack-protector-guard-reg=tp \
-mstack-protector-guard-offset=$(shell \
awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
include/generated/asm-offsets.h))
endif
# arch specific predefines for sparse
CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
# Default target when executing plain make
boot := arch/riscv/boot
ifeq ($(CONFIG_XIP_KERNEL),y)
KBUILD_IMAGE := $(boot)/xipImage
else
KBUILD_IMAGE := $(boot)/Image.gz
endif
libs-y += arch/riscv/lib/
libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
ifeq ($(KBUILD_EXTMOD),)
ifeq ($(CONFIG_MMU),y)
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
riscv: compat: vdso: Add COMPAT_VDSO base code implementation There is no vgettimeofday supported in rv32 that makes simple to generate rv32 vdso code which only needs riscv64 compiler. Other architectures need change compiler or -m (machine parameter) to support vdso32 compiling. If rv32 support vgettimeofday (which cause C compile) in future, we would add CROSS_COMPILE to support that makes more requirement on compiler enviornment. linux-rv64/arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg: file format elf64-littleriscv Disassembly of section .text: 0000000000000800 <__vdso_rt_sigreturn>: 800: 08b00893 li a7,139 804: 00000073 ecall 808: 0000 unimp ... 000000000000080c <__vdso_getcpu>: 80c: 0a800893 li a7,168 810: 00000073 ecall 814: 8082 ret ... 0000000000000818 <__vdso_flush_icache>: 818: 10300893 li a7,259 81c: 00000073 ecall 820: 8082 ret linux-rv32/arch/riscv/kernel/vdso/vdso.so.dbg: file format elf32-littleriscv Disassembly of section .text: 00000800 <__vdso_rt_sigreturn>: 800: 08b00893 li a7,139 804: 00000073 ecall 808: 0000 unimp ... 0000080c <__vdso_getcpu>: 80c: 0a800893 li a7,168 810: 00000073 ecall 814: 8082 ret ... 00000818 <__vdso_flush_icache>: 818: 10300893 li a7,259 81c: 00000073 ecall 820: 8082 ret Finally, reuse all *.S from vdso in compat_vdso that makes implementation clear and readable. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220405071314.3225832-17-guoren@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-05 07:13:10 +00:00
$(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
$(build)=arch/riscv/kernel/compat_vdso include/generated/compat_vdso-offsets.h)
endif
endif
kbuild: unify vdso_install rules Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Unintended updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation. 'make vdso_install' for parisc does not work. 'make vdso_install' for s390 installs vdso64, but not vdso32. To address these problems, this commit introduces a generic vdso_install rule. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install a vdso file as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the base names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390 Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-10-14 10:54:35 +00:00
vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg
vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so
ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy)
KBUILD_IMAGE := $(boot)/loader.bin
else
ifeq ($(CONFIG_EFI_ZBOOT),)
KBUILD_IMAGE := $(boot)/Image.gz
else
KBUILD_IMAGE := $(boot)/vmlinuz.efi
endif
endif
endif
BOOT_TARGETS := Image Image.gz loader loader.bin xipImage vmlinuz.efi
all: $(notdir $(KBUILD_IMAGE))
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image GZIP arch/riscv/boot/Image.gz AS arch/riscv/boot/loader.o AS arch/riscv/boot/loader.o Kernel: arch/riscv/boot/Image is ready PAD arch/riscv/boot/vmlinux.bin GZIP arch/riscv/boot/vmlinuz Kernel: arch/riscv/boot/loader is ready OBJCOPY arch/riscv/boot/loader.bin Kernel: arch/riscv/boot/loader.bin is ready Kernel: arch/riscv/boot/Image.gz is ready OBJCOPY arch/riscv/boot/vmlinuz.o LD arch/riscv/boot/vmlinuz.efi.elf OBJCOPY arch/riscv/boot/vmlinuz.efi Kernel: arch/riscv/boot/vmlinuz.efi is ready The log "OBJCOPY arch/riscv/boot/Image" is displayed 5 times. (also "AS arch/riscv/boot/loader.o" twice.) It indicates that 5 threads simultaneously enter arch/riscv/boot/ and write to arch/riscv/boot/Image. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image OBJCOPY arch/riscv/boot/Image PAD arch/riscv/boot/vmlinux.bin truncate: Invalid number: 'arch/riscv/boot/vmlinux.bin' make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/riscv/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/riscv/boot/vmlinux.bin' make[1]: *** [arch/riscv/Makefile:167: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... Kernel: arch/riscv/boot/Image is ready GZIP arch/riscv/boot/Image.gz AS arch/riscv/boot/loader.o AS arch/riscv/boot/loader.o Kernel: arch/riscv/boot/loader is ready OBJCOPY arch/riscv/boot/loader.bin Kernel: arch/riscv/boot/loader.bin is ready Kernel: arch/riscv/boot/Image.gz is ready make: *** [Makefile:234: __sub-make] Error 2 Image.gz, loader, vmlinuz.efi depend on Image. loader.bin depends on loader. Such dependencies are not specified in arch/riscv/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231119100024.2370992-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-19 10:00:24 +00:00
loader.bin: loader
Image.gz loader vmlinuz.efi: Image
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
@$(kecho) ' Kernel: $(boot)/$@ is ready'
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
install: KBUILD_IMAGE := $(boot)/Image
zinstall: KBUILD_IMAGE := $(boot)/Image.gz
install zinstall:
$(call cmd,install)
PHONY += rv32_randconfig
rv32_randconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/riscv/configs/32-bit.config \
-f $(srctree)/Makefile randconfig
PHONY += rv64_randconfig
rv64_randconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/riscv/configs/64-bit.config \
-f $(srctree)/Makefile randconfig
PHONY += rv32_defconfig
rv32_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile defconfig 32-bit.config
PHONY += rv32_nommu_virt_defconfig
rv32_nommu_virt_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile nommu_virt_defconfig 32-bit.config