kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----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=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
Fix the wrong drivers_autoprobe path name in the document
Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Message-Id: <20230821011535.1117-1-shawn.shao@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
If the MCU on Turris Omnia is running newer firmware versions, the LED
controller supports RGB gamma correction (and enables it by default for
newer boards).
Determine whether the gamma correction setting feature is supported and
add the ability to set it via sysfs attribute file.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230918161104.20860-5-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Change ABI documentation contact information from Russ Weight to
Peter Colberg.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Peter Colberg <peter.colberg@intel.com>
Link: https://lore.kernel.org/r/20230928164738.278635-1-russell.h.weight@intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Highlights:
- asus-wmi: Support for screenpad and solve brightness key
press duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Remove void function return
amd/hsmp:
- add support for metrics tbl
- create plat specific struct
- Fix iomem handling
- improve the error log
amd/pmc:
- Add dump_custom_stb module parameter
- Add PMFW command id to support S2D force flush
- Handle overflow cases where the num_samples range is higher
- Use flex array when calling amd_pmc_stb_debugfs_open_v2()
asus-wireless:
- Replace open coded acpi_match_acpi_device()
asus-wmi:
- add support for ASUS screenpad
- Do not report brightness up/down keys when also reported by acpi_video
gpiolib: acpi:
- Add a ignore interrupt quirk for Peaq C1010
- Check if a GPIO is listed in ignore_interrupt earlier
hp-bioscfg:
- Annotate struct bios_args with __counted_by
inspur-platform-profile:
- Add platform profile support
int3472:
- Add new skl_int3472_fill_gpiod_lookup() helper
- Add new skl_int3472_gpiod_get_from_temp_lookup() helper
- Stop using gpiod_toggle_active_low()
- Switch to devm_get_gpiod()
intel: bytcrc_pwrsrc:
- Convert to platform remove callback returning void
intel/ifs:
- Add new CPU support
- Add new error code
- ARRAY BIST for Sierra Forest
- Gen2 scan image loading
- Gen2 Scan test support
- Metadata validation for start_chunk
- Refactor image loading code
- Store IFS generation number
- Validate image size
intel_speed_select_if:
- Remove hardcoded map size
- Use devm_ioremap_resource
intel/tpmi:
- Add debugfs support for read/write blocked
- Add defines to get version information
intel-uncore-freq:
- Ignore minor version change
ISST:
- Allow level 0 to be not present
- Ignore minor version change
- Use fuse enabled mask instead of allowed levels
mellanox:
- Fix misspelling error in routine name
- Rename some init()/exit() functions for consistent naming
mlxbf-bootctl:
- Convert to platform remove callback returning void
mlxbf-pmc:
- Add support for BlueField-3
mlxbf-tmfifo:
- Convert to platform remove callback returning void
mlx-Convert to platform remove callback returning void:
- mlx-Convert to platform remove callback returning void
mlxreg-hotplug:
- Convert to platform remove callback returning void
mlxreg-io:
- Convert to platform remove callback returning void
mlxreg-lc:
- Convert to platform remove callback returning void
msi-ec:
- Add more EC configs
- rename fn_super_swap
nvsw-sn2201:
- Convert to platform remove callback returning void
sel3350-Convert to platform remove callback returning void:
- sel3350-Convert to platform remove callback returning void
siemens: simatic-ipc-batt-apollolake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-elkhartlake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-f7188x:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Simplify simatic_ipc_batt_remove()
surface: acpi-notify:
- Convert to platform remove callback returning void
surface: aggregator:
- Annotate struct ssam_event with __counted_by
surface: aggregator-cdev:
- Convert to platform remove callback returning void
surface: aggregator-registry:
- Convert to platform remove callback returning void
surface: dtx:
- Convert to platform remove callback returning void
surface: gpe:
- Convert to platform remove callback returning void
surface: hotplug:
- Convert to platform remove callback returning void
surface: surface3-wmi:
- Convert to platform remove callback returning void
think-lmi:
- Add bulk save feature
- Replace kstrdup() + strreplace() with kstrdup_and_replace()
- Use strreplace() to replace a character by nul
thinkpad_acpi:
- Add battery quirk for Thinkpad X120e
- replace deprecated strncpy with memcpy
- sysfs interface to auxmac
tools/power/x86/intel-speed-select:
- Display error for core-power support
- Increase max CPUs in one request
- No TRL for non compute domains
- Sanitize integer arguments
- turbo-mode enable disable swapped
- Update help for TRL
- Use cgroup isolate for CPU 0
- v1.18 release
wmi:
- Decouple probe deferring from wmi_block_list
- Decouple WMI device removal from wmi_block_list
- Fix opening of char device
- Fix probe failure when failing to register WMI devices
- Fix refcounting of WMI devices in legacy functions
x86-android-tablets:
- Add a comment about x86_android_tablet_get_gpiod()
- Create a platform_device from module_init()
- Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]
- Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
- Remove invalid_aei_gpiochip from Peaq C1010
- Remove invalid_aei_gpiochip support
- Stop using gpiolib private APIs
- Use platform-device as gpio-keys parent
xo15-ebook:
- Replace open coded acpi_match_acpi_device()
Merges:
- Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZT+lBwAKCRBZrE9hU+XO
Mck0AQCFU7dYLCF4d1CXtHf1eZhSXLpYdhcO+C08JGGoM+MqSgD+Jyb9KJHk4pxE
FvKG51I9neyAne9lvNrLodHRzxCYgAo=
=duM8
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
Export the QoS Throttling Group ID from the CXL Fixed Memory Window
Structure (CFMWS) under the root decoder sysfs attributes as qos_class.
CXL rev3.0 9.17.1.3 CXL Fixed Memory Window Structure (CFMWS)
cxl cli will use this id to match with the _DSM retrieved id for a
hot-plugged CXL memory device DPA memory range to make sure that the
DPA range is under the right CFMWS window.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169713681699.2205276.14475306324720093079.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This attribute allows cxl-cli to determine whether there are decoders
committed to a memdev. This is only a snapshot of the state, and
doesn't offer any protection or serialization against a concurrent
disable-region operation.
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169747907439.272156.10261062080830155662.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CDX bus needs to be disabled before updating/writing devices
in the FPGA. Once the devices are written, the bus shall be
rescanned. This change provides sysfs entry to enable/disable the
CDX bus.
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-6-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the attribute `num_rps` to the `qat` attribute group. This returns
the number of ring pairs that a single device has. This allows to know
the maximum value that can be set to the attribute `rp2svc`.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `rp2svc` to the `qat` attribute group. This provides a
way for a user to query a specific ring pair for the type of service
that is currently configured for.
When read, the service will be returned for the defined ring pair.
When written to this value will be stored as the ring pair to return
the service of.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an interface for the rate limiting feature which allows to add,
remove and modify a QAT SLA (Service Level Agreement).
This adds a new sysfs attribute group, `qat_rl`, which can be accessed
from /sys/bus/pci/devices/<BUS:DEV:FUNCTION> with the following
hierarchy:
|-+ qat_rl
|---- id (RW) # SLA identifier
|---- cir (RW) # Committed Information Rate
|---- pir (RW) # Peak Information Rate
|---- srv (RW) # Service to be rate limited
|---- rp (RW) (HEX) # Ring pairs to be rate limited
|---- cap_rem (RW) # Remaining capability for a service
|---- sla_op (WO) # Allows to perform an operation on an SLA
The API works by setting the appropriate RW attributes and then
issuing a command through the `sla_op`. For example, to create an SLA, a
user needs to input the necessary data into the attributes cir, pir, srv
and rp and then write into `sla_op` the command `add` to execute the
operation.
The API also provides `cap_rem` attribute to get information about
the remaining device capability within a certain service which is
required when setting an SLA.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce ras counters interface for counting QAT specific device
errors and expose them through the newly created qat_ras sysfs
group attribute.
This adds the following attributes:
- errors_correctable: number of correctable errors
- errors_nonfatal: number of uncorrectable non fatal errors
- errors_fatal: number of uncorrectable fatal errors
- reset_error_counters: resets all counters
These counters are initialized during device bring up and cleared
during device shutdown and are applicable only to QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmUu3sURHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FohL9w/+PVaeiYsmuJfWcxjVhiGFz+HBbwSFcHFp
ASXuYq9rYoea62JlvcLB3GJ43ziB80Am5qA5bWTkPHFqbAPZlgDzoGZGPMrpjfI1
iV6NwiPigRRTw2JjB0TDS8HepQomA1qA0FwXngLrSy1eQmN0/NJOp0k8m54OpCV+
FdW3dDy7UomXyVCb+OAOWNYvV20ZOK1/WK9yWCpPWZtOKMfX2cLLqiwtjm6VdXTg
wtqSRVfBB/p7k3UapXiLuz4fExEancW4z2qYEaBK2beba6LFuFzvfwq/t6CJwVWD
wd6mif+1eTtR9wxZcsmefsbB6r9zOd4eWRaCBjmW3fm9xNY2UDzWT29YpyDOyA8R
llu44gDtlJvDpyUYi44rLDyZO886fJtlVLyOHOaVJy77SV+so16P9qC2qd9dJXtw
8/exWxNmiA/LwVq+SvvVgfY33yCynKv5St1cHMDDFzC1eZMnVGAaZ4HBp1wiGGuN
T1ZWKMDWViH5F7ug2pKopKoemQyhmsa8JbUQc+NZS+5efdn6LlVhe1BVZ+4/A3jb
BQ838lkl3O8D0XkS7urM6Ggs8m/D0eBLBpfgID/C4OaEJnn6G1ZVvNue5r99SNws
JV9T7zJQ8G1NKl3s1+JrwBf7XeSKtlZa0cbWejbe4Ib2u+G9M863YS0Ivrk5yH+C
XIojuxjOOmQ=
=wth0
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
* tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: Use device_get_match_data()
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
dt-bindings: trivial-devices: add silabs,si7005
iio: si7005: Add device tree support
drivers: imu: adis16475.c: Remove scan index from delta channels
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
iio: resolver: ad2s1210: remove of_match_ptr()
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: move out of staging
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: implement fault events
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
...
One of the common operations of a TSM (Trusted Security Module) is to
provide a way for a TVM (confidential computing guest execution
environment) to take a measurement of its launch state, sign it and
submit it to a verifying party. Upon successful attestation that
verifies the integrity of the TVM additional secrets may be deployed.
The concept is common across TSMs, but the implementations are
unfortunately vendor specific. While the industry grapples with a common
definition of this attestation format [1], Linux need not make this
problem worse by defining a new ABI per TSM that wants to perform a
similar operation. The current momentum has been to invent new ioctl-ABI
per TSM per function which at best is an abdication of the kernel's
responsibility to make common infrastructure concepts share common ABI.
The proposal, targeted to conceptually work with TDX, SEV-SNP, COVE if
not more, is to define a configfs interface to retrieve the TSM-specific
blob.
report=/sys/kernel/config/tsm/report/report0
mkdir $report
dd if=binary_userdata_plus_nonce > $report/inblob
hexdump $report/outblob
This approach later allows for the standardization of the attestation
blob format without needing to invent a new ABI. Once standardization
happens the standard format can be emitted by $report/outblob and
indicated by $report/provider, or a new attribute like
"$report/tcg_coco_report" can emit the standard format alongside the
vendor format.
Review of previous iterations of this interface identified that there is
a need to scale report generation for multiple container environments
[2]. Configfs enables a model where each container can bind mount one or
more report generation item instances. Still, within a container only a
single thread can be manipulating a given configuration instance at a
time. A 'generation' count is provided to detect conflicts between
multiple threads racing to configure a report instance.
The SEV-SNP concepts of "extended reports" and "privilege levels" are
optionally enabled by selecting 'tsm_report_ext_type' at register_tsm()
time. The expectation is that those concepts are generic enough that
they may be adopted by other TSM implementations. In other words,
configfs-tsm aims to address a superset of TSM specific functionality
with a common ABI where attributes may appear, or not appear, based on
the set of concepts the implementation supports.
Link: http://lore.kernel.org/r/64961c3baf8ce_142af829436@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: http://lore.kernel.org/r/57f3a05e-8fcd-4656-beea-56bb8365ae64@linux.microsoft.com [2]
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Adding functions that USB hub code can use to inform the
Type-C class about connected USB devices.
Once taken into use, it will allow the Type-C port drivers
to power off components that are not needed, for example if
USB2 device is enumerated, everything that is only relevant
for USB3 (retimers, etc.), can be powered off.
This will also create a symlink "typec" for the USB devices
pointing to the USB Type-C partner device.
Suggested-by: Benson Leung <bleung@chromium.org>
Tested-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231011105825.320062-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Compress and Verify (CnV) feature check and ensures data integrity
in the compression operation. The implementation of CnV keeps a record
of the CnV errors that have occurred since the driver was loaded.
Expose CnV error stats by providing the "cnv_errors" file under
debugfs. This includes the number of errors detected up to now and
the type of the last error. The error count is provided on a per
Acceleration Engine basis and it is reset every time the driver is loaded.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT devices implement a mechanism that allows them to go autonomously
to a low power state depending on the load.
Expose power management info by providing the "pm_status" file under
debugfs. This includes PM state, PM event log, PM event counters, PM HW
CSRs, per-resource type constrain counters and per-domain power gating
status specific to the QAT device.
This information is retrieved from (1) the FW by means of
ICP_QAT_FW_PM_INFO command, (2) CSRs and (3) counters collected by the
device driver.
In addition, add logic to keep track and report power management event
interrupts and acks/nacks sent to FW to allow/prevent state transitions.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When reading the position and velocity on the AD2S1210, there is also a
3rd byte following the two data bytes that contains the fault flag bits.
This patch adds support for reading this byte and generating events when
faults occur.
The faults are mapped to various channels and event type in order to
have a unique event for each fault.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-13-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com
The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231003075339.197099-1-matt@codeconstruct.com.au
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update the firmware_loader documentation and corresponding section
in the MAINTAINERs file with a new email address.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "c_terminal_type" and "p_terminal_type" configfs entries
in order to allow the user to change the capture and playback terminal
type codes.
These fields affect the type of audio device that Windows detects, so
being able to modify this is useful when it would be advantageous for
a gadget to be detected as something other than a generic
speaker/microphone.
The fields default to microphone for the capture type field and speaker
for the playback type field as was the case before.
Signed-off-by: James Gruber <jimmyjgruber@gmail.com>
Link: https://lore.kernel.org/r/20230914222746.155126-1-jimmyjgruber@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update DAMON ABI document for the newly added DAMON sysfs file for DAMOS
apply intervals (apply_interval_us file).
Link: https://lkml.kernel.org/r/20230916020945.47296-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the possibility of multiple wq drivers that can be bound to the wq,
the user config tool accel-config needs a way to know which wq driver to
bind to the wq. Introduce per wq driver_name sysfs attribute where the user
can indicate the driver to be bound to the wq. This allows accel-config to
just bind to the driver using wq->driver_name.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230908201045.4115614-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Exposing the value of the field as is.
The Peak Current value has to be interpreted as described
in Table 6-10 (Fixed Power Source Peak Current Capability)
of the USB Power Delivery Specification, but that
interpretation will be done in user space, not in kernel.
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231002142240.2641962-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deta angle and deta velocity channels were added in parallel with
color temperature and chromacity so this merge had to assign a
consistent order. I put the color related ones second.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In most cases, ambient color sensors also support the x and y light
colors, which represent the coordinates on the CIE 1931 chromaticity
diagram. Thus, add channel type for chromaticity.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230919081054.2050714-7-Basavaraj.Natikar@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In most cases, ambient color sensors also support light color
temperature, which is measured in kelvin. Thus, add channel type light
color temperature.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230919081054.2050714-3-Basavaraj.Natikar@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On Lenovo platforms there is a limitation in the number of times an
attribute can be saved. This is an architectural limitation and it limits
the number of attributes that can be modified to 48.
A solution for this is instead of the attribute being saved after every
modification allow a user to bulk set the attributes and then trigger a
final save. This allows unlimited attributes.
This patch introduces a save_settings attribute that can be configured to
either single or bulk mode by the user.
Single mode is the default but customers who want to avoid the 48
attribute limit can enable bulk mode.
Displaying the save_settings attribute will display the enabled mode.
When in bulk mode writing 'save' to the save_settings attribute will
trigger a save. Once this has been done a reboot is required before more
attributes can be modified.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230919141530.4805-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.
Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.
When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.
As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs description for fw_counters reports an incorrect path
indicating a qat folder that does not exist. Fix it.
Fixes: 865b50fe6e ("crypto: qat - add fw_counters debugfs file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is the iio driver for Microchip family of 153.6 ksps,
Low-Noise 16/24-Bit Delta-Sigma ADCs with an SPI interface
(Microchip's MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R,
MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R,
MCP3562R and MCP3564R analog to digital converters).
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20230829154133.40716-3-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The delta velocity is defined as a piece-wise integration of
acceleration data. The delta velocity represents the linear velocity
change between two consecutive measurements and it
is measured in m / s (meters per second).
In order to track the total linear velocity change during a desired
period of time, simply sum-up the delta velocity samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The delta angle is defined as a piece-wise integration of angular
velocity data. The delta angle represents the amount of
angular displacement between two consecutive measurements and it
is measured in radians.
In order to track the total angular displacement during a desired
period of time, simply sum-up the delta angle samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
- New Drivers
- Add support for NXP PCA995x I2C Constant Current LED Driver
- New Device Support
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
- Fix-ups
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not required
- Omit the use of redundant casts and if relevant replace with better ones
- Use purpose-built APIs for various actions; sysfs_emit(), module_led_trigger()
- Remove a bunch of superfluous locking
- Bug Fixes
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check
-----BEGIN PGP SIGNATURE-----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=wNmv
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
New Drivers:
- Add support for NXP PCA995x I2C Constant Current LED Driver
New Device Support:
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
Fix-ups:
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not
required
- Omit the use of redundant casts and if relevant replace with better
ones
- Use purpose-built APIs for various actions; sysfs_emit(),
module_led_trigger()
- Remove a bunch of superfluous locking
Bug Fixes:
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check"
* tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits)
leds: aw2013: Enable pull-up supply for interrupt and I2C
dt-bindings: leds: Document pull-up supply for interrupt and I2C
dt-bindings: leds: aw2013: Document interrupt
leds: uleds: Use module_misc_device macro to simplify the code
leds: trigger: netdev: Use module_led_trigger macro to simplify the code
dt-bindings: leds: Fix reference to definition of default-state
leds: turris-omnia: Drop unnecessary mutex locking
leds: turris-omnia: Use sysfs_emit() instead of sprintf()
leds: Make leds_class a static const structure
leds: Remove redundant of_match_ptr()
dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
dt-bindings: leds: rohm,bd71828: Drop select:false
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
leds: multicolor: Use rounded division when calculating color components
leds: rgb: Add a multicolor LED driver to group monochromatic LEDs
dt-bindings: leds: Add binding for a multicolor group of LEDs
leds: class: Store the color index in struct led_classdev
leds: Provide devm_of_led_get_optional()
leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
...
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding
-----BEGIN PGP SIGNATURE-----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=LPWk
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
In this cycle, we don't have a highlighted feature enhancement, but mostly
have fixed issues mainly in two parts: 1) zoned block device, 2) compression
support. For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases caused by
wrong compression policy and logics. Other than them, there were some reverts
and stat corrections.
Bug fix:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and clean-ups.
-----BEGIN PGP SIGNATURE-----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=Qa8+
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we don't have a highlighted feature enhancement, but
mostly have fixed issues mainly in two parts: 1) zoned block device,
and 2) compression support.
For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases
caused by wrong compression policy and logics. Other than them, there
were some reverts and stat corrections.
Bug fixes:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and
clean-ups"
* tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (25 commits)
f2fs: use finish zone command when closing a zone
f2fs: compress: fix to assign compress_level for lz4 correctly
f2fs: fix error path of f2fs_submit_page_read()
f2fs: clean up error handling in sanity_check_{compress_,}inode()
f2fs: avoid false alarm of circular locking
Revert "f2fs: do not issue small discard commands during checkpoint"
f2fs: doc: fix description of max_small_discards
f2fs: should update REQ_TIME for direct write
f2fs: fix to account cp stats correctly
f2fs: fix to account gc stats correctly
f2fs: remove unneeded check condition in __f2fs_setxattr()
f2fs: fix to update i_ctime in __f2fs_setxattr()
Revert "f2fs: fix to do sanity check on extent cache correctly"
f2fs: increase usage of folio_next_index() helper
f2fs: Only lfs mode is allowed with zoned block device feature
f2fs: check zone type before sending async reset zone command
f2fs: compress: don't {,de}compress non-full cluster
f2fs: allow f2fs_ioc_{,de}compress_file to be interrupted
f2fs: don't reopen the main block device in f2fs_scan_devices
f2fs: fix to avoid mmap vs set_compress_option case
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPIAOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCgybzMp0YnSildFetSC8lUJTnzjQcAn3KWzb75
Zt72jxGl4ZOXHEpozG4O
=FLrK
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
Highlights:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add SEL-3350 platform driver:
- Add SEL-3350 platform driver
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
MAINTAINERS:
- Add entries for Siemens IPC modules
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next:
- Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next
Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Move all simatic ipc drivers to the subdirectory siemens:
- Move all simatic ipc drivers to the subdirectory siemens
asus-wmi:
- corrections to egpu safety check
- Fix support for showing middle fan RPM
- expose dGPU and CPU tunables for ROG
- support setting mini-LED mode
- add safety checks to gpu switching
- don't allow eGPU switching if eGPU not connected
- add WMI method to show if egpu connected
- support middle fan custom curves
- add support for showing middle fan RPM
- add support for showing charger mode
dell-sysman:
- Fix reference leak
doc:
- TPMI: Add debugfs documentation
hp-bioscfg:
- Update steps order list elements are evaluated
- Use kmemdup() to replace kmalloc + memcpy
- Remove duplicate use of variable in inner loop
- Change how password encoding size is evaluated
- Change how enum possible values size is evaluated
- Change how order list size is evaluated
- Change how prerequisites size is evaluated
- Replace the word HACK from source code
- Fix uninitialized variable errors
- Fix memory leaks in attribute packages
- fix error reporting in hp_add_other_attributes()
- prevent a small buffer overflow
- fix a signedness bug in hp_wmi_perform_query()
- MAINTAINERS
- Makefile
- surestart-attributes
- string-attributes
- spmobj-attributes
- passwdobj-attributes
- order-list-attributes
- int-attributes
- enum-attributes
- biosattr-interface
- bioscfg
- bioscfg-h
- Documentation
ideapad-laptop:
- Add support for keyboard backlights using KBLC ACPI symbol
leds:
- simatic-ipc-leds: default config switch to platform switch
mlx-platform:
- Add dependency on PCI to Kconfig
mlxbf-bootctl:
- Support sysfs entries for MFG fields
- Support setting the ARM boot state to "OS up"
- Support the large icmc write/read
p2sb:
- Make the Kconfig symbol hidden
platform:
- mellanox: nvsw-sn2201: change fans i2c busses.
- mellanox: mlxreg-hotplug: Extend condition for notification callback processing
- mellanox: Add initial support for PCIe based programming logic device
- mellanox: mlx-platform: Get interrupt line through ACPI
- mellanox: mlx-platform: Introduce ACPI init flow
- mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
- mellanox: mlx-platform: Add reset callback
- mellanox: Cosmetic changes
- mellanox: mlx-platform: Modify power off callback
- mellanox: mlx-platform: add support for additional CPLD
- mellanox: mlx-platform: Add reset cause attribute
- mellanox: mlx-platform: Modify health and power hotplug action
- mellanox: Modify reset causes description
- mellanox: Add field upgrade capability register
- mellanox: Add new attributes
- Explicitly include correct DT includes
platform/x86/amd/pmc:
- Fix build error with randconfig
- Move PMC driver to separate directory
platform/x86/amd/pmf:
- Fix a missing cleanup path
- Use str_on_off() helper
platform/x86/intel/tpmi:
- Add debugfs interface
- Read feature control status
platform/x86/siemens:
- simatic-ipc-batt: fix logical error for BX-59A
- simatic-ipc: fix logical error for BX-59A
- simatic-ipc-batt: fix wrong pointer pass to PTR_ERR()
- simatic-ipc-batt: add support for module BX-59A
- simatic-ipc: add new models BX-56A/BX-59A
- Kconfig: adjust help text
- simatic-ipc-batt: fix bat reading in BX_21A
simatic-ipc:
- use extra module loading for watchdog
- add auto-loading of hwmon modules
- add another model
- drop PCI runtime depends and header
- add CMOS battery monitoring
- add another model BX-21A
system76:
- Handle new KBLED ACPI methods
thinkpad_acpi:
- Switch to memdup_user_nul() helper
- use lockdep annotations
- take mutex for hotkey_mask_{set,get}
tools/power/x86/intel-speed-select:
- v1.17 release
- Change mem-frequency display name
- Prevent CPU 0 offline
- Error on CPU count exceed in request
- Support more than 8 sockets.
- Fix CPU count display
watchdog:
- simatic: Use idiomatic selection of P2SB
- simatic: add PCI dependency
- make Siemens Simatic watchdog driver default on platform
- simatic-ipc-wdt: make IO region access of one model muxed
wmi-bmof:
- Update MAINTAINERS entry
- Simplify read_bmof()
- Use device_create_bin_file()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTx720UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wHYggAgPpl4tcbqUK7S/fwVP2SzBKI+eF3
5PjO7PlMEVzyKyjHdkqoV8miMffWAGVPE+LV33Uifs5WTFjHRq2fq/Esvj9mAstG
1fCoHJ442xYkwNCUT1CCP7VsmcvV5eFXBjBantvwmIs8TyknGHwtq1h+d95evp4n
2uyQlRMmrWh/+8fjD8x5V35T0tky+4a4EX2WNLul13LlHCybGT/F2Kq456WdthjJ
zTQSL+qAMWmAiQKSEmhI3bRnFYPdpTetjiNSTlQczch8Y4qV3mJQlnkyDPX7SM9w
M2uZ4W39Ptxihx0ks/MIcuA4yrTfUX8BnhMTD29ZYCKHS7xBqW8YC5HQug==
=GaQL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
The main change this time is the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together. Ulf Hansson is taking over maintainership for
these and is sending a separate pull request with the same commits,
but they are in the soc drivers tree to avoid conflicts against other
soc driver patches.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other firmware
drivers.
On the soc driver side, the updates are mostly cleanups across a number
of Arm platforms. On driver for loongarch adds power management for DT
based systems, another driver is for HiSilicon's Arm server chips with
their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTuWdMACgkQYKtH/8kJ
UicprBAAsvZ5h636MOwYasgK1bKnsWgj9yrBSzIf7VzKbBS5/QCrDSDek9oDvTBp
p6Rr+WC1RQl9i2DiRVSbEqkUS6X4hQF0kJdLudBwYuxBDf8ayzFzKAKk/ecsyoaC
0Rkeh4fCu1zVnQ2DZSPFJVRl01/oCr1ZtJ1W0UrXCslOSQy2987VqpJ/EQbaDLgb
3imxpvJNBscaKwcYRgxhcIMBLdGi3qXRE/TmAf1WMe8w6dfk5KmFiPPD7zxPTnFb
0fssdxgocjOkXEn6L1VdBMoTt4UQaU+xbnFsOsDA/F0EjR9ZLlhtwZxANv4GicP6
52FMFaxeXSUnpBelzuyRQpgnt9WW3ZbBGb9iaisTl1pwjC3PcN2noo8uFZk+kO6b
8q0fh4KVmD0QIupC4cfTsF4SGAQvnhko2ls9bt4FTF+z0COV3Ifs2cAggH+hn3yD
IziBrUUZrR4G8XhisJRQNZcRh1H/vVchcumqsxzCMhpXLWwdZ5vW85GCR/fAtQQT
woYgqFHXZjEko66bu2dtayr1dgmPvfbO6rXpUkIdeskY6XuKfZXuB93LkhsZ17LY
dfAaBLUebjMcpLrltCqyP1tUoqGyVOTJKxtB2MolHo/V/2JbKYmYHAMy+qX5I0Qm
UUbQDpHnkaQMTK2L/qvdfE4lgwWfFWX7lCK/AGa4ZBFl+Zl6DgE=
=xmHW
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZO0WoxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5alsAP0UZQIKI2zEjFdtucgClcSouflIOC5i
Hvtgv3qVFXPZQwEA2H/SGjigtH5NruVXECDZdrIfaGGvBhyeY72lbswXfQ0=
=Gu8i
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- With commit 099f26f22f ("integrity: machine keyring CA
configuration") certificates may be loaded onto the IMA keyring,
directly or indirectly signed by keys on either the "builtin" or the
"machine" keyrings.
With the ability for the system/machine owner to sign the IMA policy
itself without needing to recompile the kernel, update the IMA
architecture specific policy rules to require the IMA policy itself
be signed.
[ As commit 099f26f22f was upstreamed in linux-6.4, updating the
IMA architecture specific policy now to require signed IMA policies
may break userspace expectations. ]
- IMA only checked the file data hash was not on the system blacklist
keyring for files with an appended signature (e.g. kernel modules,
Power kernel image).
Check all file data hashes regardless of how it was signed
- Code cleanup, and a kernel-doc update
* tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec_lock: Replace kexec_mutex() by kexec_lock() in two comments
ima: require signed IMA policy when UEFI secure boot is enabled
integrity: Always reference the blacklist keyring with appraisal
ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
* Improvements
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync.
- Support official HID "GOOG0016" for ChromeOS ACPI.
* Fixes
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER.
* Misc
- Update MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZOwPUBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0nSkBAKotxdetlYni+PbaoBjMQgRRLhM9GE7i
JS9UQGmzdR46AP0SGUPrqWJcjtsIYxeemVTMqOkIjihp06xLR3r1USeEBw==
=P8Uo
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync
- Support official HID "GOOG0016" for ChromeOS ACPI
Fixes:
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER
Misc:
- Update MAINTAINERS"
* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
platform/chrome: chromeos_acpi: support official HID GOOG0016
platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
MAINTAINERS: update maintainers of chrome-platform
- Support partial SMT enablement.
So far the sysfs SMT control only allows to toggle between SMT on and
off. That's sufficient for x86 which usually has at max two threads
except for the Xeon PHI platform which has four threads per core.
Though PowerPC has up to 16 threads per core and so far it's only
possible to control the number of enabled threads per core via a
command line option. There is some way to control this at runtime, but
that lacks enforcement and the usability is awkward.
This update expands the sysfs interface and the core infrastructure to
accept numerical values so PowerPC can build SMT runtime control for
partial SMT enablement on top.
The core support has also been provided to the PowerPC maintainers who
added the PowerPC related changes on top.
- Minor cleanups and documentation updates.
-----BEGIN PGP SIGNATURE-----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=JQRJ
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the CPU hotplug core:
- Support partial SMT enablement.
So far the sysfs SMT control only allows to toggle between SMT on
and off. That's sufficient for x86 which usually has at max two
threads except for the Xeon PHI platform which has four threads per
core
Though PowerPC has up to 16 threads per core and so far it's only
possible to control the number of enabled threads per core via a
command line option. There is some way to control this at runtime,
but that lacks enforcement and the usability is awkward
This update expands the sysfs interface and the core infrastructure
to accept numerical values so PowerPC can build SMT runtime control
for partial SMT enablement on top
The core support has also been provided to the PowerPC maintainers
who added the PowerPC related changes on top
- Minor cleanups and documentation updates"
* tag 'smp-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Fix state names
cpu/hotplug: Remove unused function declaration cpu_set_state_online()
cpu/SMT: Fix cpu_smt_possible() comment
cpu/SMT: Allow enabling partial SMT states via sysfs
cpu/SMT: Create topology_smt_thread_allowed()
cpu/SMT: Remove topology_smt_supported()
cpu/SMT: Store the current/max number of threads
cpu/SMT: Move smt/control simple exit cases earlier
cpu/SMT: Move SMT prototypes into cpu_smt.h
cpu/hotplug: Remove dependancy against cpu_primary_thread_mask
Introduce the crash_hotplug attribute for memory and CPUs for use by
userspace. These attributes directly facilitate the udev rule for
managing userspace re-loading of the crash kernel upon hot un/plug
changes.
For memory, expose the crash_hotplug attribute to the
/sys/devices/system/memory directory. For example:
# udevadm info --attribute-walk /sys/devices/system/memory/memory81
looking at device '/devices/system/memory/memory81':
KERNEL=="memory81"
SUBSYSTEM=="memory"
DRIVER==""
ATTR{online}=="1"
ATTR{phys_device}=="0"
ATTR{phys_index}=="00000051"
ATTR{removable}=="1"
ATTR{state}=="online"
ATTR{valid_zones}=="Movable"
looking at parent device '/devices/system/memory':
KERNELS=="memory"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{auto_online_blocks}=="offline"
ATTRS{block_size_bytes}=="8000000"
ATTRS{crash_hotplug}=="1"
For CPUs, expose the crash_hotplug attribute to the
/sys/devices/system/cpu directory. For example:
# udevadm info --attribute-walk /sys/devices/system/cpu/cpu0
looking at device '/devices/system/cpu/cpu0':
KERNEL=="cpu0"
SUBSYSTEM=="cpu"
DRIVER=="processor"
ATTR{crash_notes}=="277c38600"
ATTR{crash_notes_size}=="368"
ATTR{online}=="1"
looking at parent device '/devices/system/cpu':
KERNELS=="cpu"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{crash_hotplug}=="1"
ATTRS{isolated}==""
ATTRS{kernel_max}=="8191"
ATTRS{nohz_full}==" (null)"
ATTRS{offline}=="4-7"
ATTRS{online}=="0-3"
ATTRS{possible}=="0-7"
ATTRS{present}=="0-3"
With these sysfs attributes in place, it is possible to efficiently
instruct the udev rule to skip crash kernel reloading for kernels
configured with crash hotplug support.
For example, the following is the proposed udev rule change for RHEL
system 98-kexec.rules (as the first lines of the rule file):
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
When examined in the context of 98-kexec.rules, the above rules test if
crash_hotplug is set, and if so, the userspace initiated
unload-then-reload of the crash kernel is skipped.
CPU and memory checks are separated in accordance with CONFIG_HOTPLUG_CPU
and CONFIG_MEMORY_HOTPLUG kernel config options. If an architecture
supports, for example, memory hotplug but not CPU hotplug, then the
/sys/devices/system/memory/crash_hotplug attribute file is present, but
the /sys/devices/system/cpu/crash_hotplug attribute file will NOT be
present. Thus the udev rule skips userspace processing of memory hot
un/plug events, but the udev rule will evaluate false for CPU events, thus
allowing userspace to process CPU hot un/plug events (ie the
unload-then-reload of the kdump capture kernel).
Link: https://lkml.kernel.org/r/20230814214446.6659-5-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add documentation for the new attributes:
- CPLD versioning: "cpld5_pn", "cpld5_version", "cpld5_version_min".
- JTAG capability: "jtag_cap", indicating the available method of
CPLD/FPGA devices field update.
- System lid status: "lid_open".
- Reset caused by long press of power button: "reset_long_pwr_pb".
- Reset caused by switch board DC-DC converter device failure:
"reset_swb_dc_dc_pwr_fail".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-17-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch extends the mlxbf-bootctl driver's sysfs entries
to support read and write access for the manufacturing (MFG)
fields in the board-level EEPROM. The MFG fields are set
once during the board manufacturing phase, and then the MFG
fields are write-protected.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit b655892ffd ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes: b655892ffd ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This set consists primarily of minor clean-ups. The counter_priv()
'const' attribute change does yield a small improvement in reducing
the binary size.
Changes
* rz-mtu3-cnt
- Reorder locking sequence for consistency
* Documentation
- sysfs-bus-counter: Fix indentation
* counter
- Declare counter_priv() to be const
* microchip-tcb-capture
- Explicitly include correct DT includes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZN+bCQAKCRC1SFbKvhIj
K9X9AQCJJKkhUtsB8Q0NqfFWbNynLoKZAN5b+jzXM6x8wcoyqAD9F8mblAz80YG7
8XIZXH9DkFKknfeRVOHEBlPFx1vpDws=
=dpP8
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.6 cycle
This set consists primarily of minor clean-ups. The counter_priv()
'const' attribute change does yield a small improvement in reducing
the binary size.
Changes
* rz-mtu3-cnt
- Reorder locking sequence for consistency
* Documentation
- sysfs-bus-counter: Fix indentation
* counter
- Declare counter_priv() to be const
* microchip-tcb-capture
- Explicitly include correct DT includes
* tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: rz-mtu3-cnt: Reorder locking sequence for consistency
Documentation: ABI: sysfs-bus-counter: Fix indentation
counter: Declare counter_priv() to be const
counter: Explicitly include correct DT includes
This includes following Thunderbolt/USB4 changes for the v6.6 merge
window:
- Replace broken mailing list address in the ABI document
- Small improvements.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=US+s
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.6 merge window
This includes following Thunderbolt/USB4 changes for the v6.6 merge
window:
- Replace broken mailing list address in the ABI document
- Small improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
Documentation/ABI: thunderbolt: Replace 01.org in contact
thunderbolt: Check Intel vendor ID in tb_switch_get_generation()
thunderbolt: Log a warning if device links are not found
thunderbolt: Set variable tmu_params storage class specifier to static
Update the DAMON ABI document for newly added
schemes/.../tried_regions/total_bytes file and the
update_schemes_tried_bytes command.
Link: https://lkml.kernel.org/r/20230802213222.109841-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The description of max_small_discards is out-of-update in below two
aspects, fix it.
- it is disabled by default
- small discards will be issued during checkpoint
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix typos in Documentation/ABI. The changes are in descriptions or
comments where they shouldn't affect use of the ABIs.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Store the color of the LED so that it is not lost after the LED's
name has been composed. This color information can then be exposed to
the user space or used by the LED consumer.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Link: https://lore.kernel.org/r/20230728153731.3742339-3-jjhiblot@traphandler.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add details of the new hv-gpci interface file called
"affinity_domain_via_partition" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-11-kjain@linux.ibm.com
Add details of the new hv-gpci interface file called
"affinity_domain_via_domain" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-9-kjain@linux.ibm.com
Add details of the new hv-gpci interface file called
"affinity_domain_via_virtual_processor" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-7-kjain@linux.ibm.com
Add details of the new hv-gpci interface file called
"processor_config" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-5-kjain@linux.ibm.com
Add details of the new hv-gpci interface file called
"processor_bus_topology" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-3-kjain@linux.ibm.com
========
Core
----
- Skipped MHI reset if the device is in RDDM EE (Ramdump mode) since the device
cannot process reset request.
- Updated the sysfs contact details to use MHI list instead of bouncing
codeaurora email ids.
- Added support to allow MHI client drivers to provide the device firmware via
a pointer. This is required to support new firmware format to be used by
ath11k drivers.
- Used vcalloc instead of vzalloc to protect against multiplication overflows.
- Removed decrementing one unused parameter.
pci_generic
-----------
- Added support for MHI SW channels (IP_SW0) so that the host can transfer data
from devices over networking interface through this specific channel.
- Added support for a clone of Quectel RM520N-GL modem which uses a different
PID as it is targeted for laptop usecase.
- Added support for a clone of Quectel EM160R-GL modem which uses a different
PID as it is targeted for laptop usecase.
- Added support for another clone of Quectel RM520N-GL modem which uses a
different PID as it is targeted for Lenovo laptop usecase.
- Added support for Dell DW5932e modem (both eSIM and non-eSIM variants).
- Added support for Telit FE990 modem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmTWUx0ACgkQVZ8R5v6R
zvXwRAf/XqcFqz4hcOgfWOiPyv1suIlkH+DCNGL5E6911uW+IoEeRdig/G8rzriX
VyGlnN94HL2BfdmFQO7J2tsuSZOMUvvo0QgtT4Dhu5ft/tP2QR7fmJ87XjCwn50Y
EboUN4cIBGVY73i5XeqrZsVvLDhXLVIhGh7LKAexigs+Ye/nCwaC6NW9qkO7brpK
/mtR86px7/+p+Eidmgjb7rq61Nww35UIplr/nAJatWr9NckCG5ytS9zGUIdvP+0q
wq6AdKEhDWkWfJEVkgKfxZkOdtJCW0AMrJUuTJq5T/FdsKzL8+lrsHbfFK+i/rXh
S+/rr0uPOiFHUqAPXpZVha8dgB8Njg==
=EUC3
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
Core
----
- Skipped MHI reset if the device is in RDDM EE (Ramdump mode) since the device
cannot process reset request.
- Updated the sysfs contact details to use MHI list instead of bouncing
codeaurora email ids.
- Added support to allow MHI client drivers to provide the device firmware via
a pointer. This is required to support new firmware format to be used by
ath11k drivers.
- Used vcalloc instead of vzalloc to protect against multiplication overflows.
- Removed decrementing one unused parameter.
pci_generic
-----------
- Added support for MHI SW channels (IP_SW0) so that the host can transfer data
from devices over networking interface through this specific channel.
- Added support for a clone of Quectel RM520N-GL modem which uses a different
PID as it is targeted for laptop usecase.
- Added support for a clone of Quectel EM160R-GL modem which uses a different
PID as it is targeted for laptop usecase.
- Added support for another clone of Quectel RM520N-GL modem which uses a
different PID as it is targeted for Lenovo laptop usecase.
- Added support for Dell DW5932e modem (both eSIM and non-eSIM variants).
- Added support for Telit FE990 modem.
* tag 'mhi-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: add support for Telit FE990 modem
bus: mhi: host: remove unused-but-set parameter
bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL Lenovo variant
bus: mhi: host: allow MHI client drivers to provide the firmware via a pointer
docs: ABI: sysfs-bus-mhi: Update contact info
bus: mhi: host: use vmalloc_array and vcalloc
bus: mhi: host: pci_generic: Add support for Dell DW5932e
bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem
bus: mhi: host: pci_generic: Add support for Quectel EM160R-GL modem
bus: mhi: host: pci_generic: Add support for IP_SW0 channels
bus: mhi: host: Skip MHI reset if device is in RDDM
New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.
Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.
Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.
-----BEGIN PGP SIGNATURE-----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=hTrR
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.6
New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.
Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.
Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.
* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
Documentation: ABI: testing: admv8818: add bypass
drivers: iio: filter: admv8818: add bypass mode
iio: light: bd27008: Support BD27010 RGB
iio: light: bu27008: add chip info
dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
iio: add MCP4728 I2C DAC driver
dt-bindings: iio: dac: add mcp4728.yaml
drivers: iio: admv1013: add vcc regulators
dt-bindings: iio: admv1013: add vcc regulators
iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
dt-bindings: iio: admv1014: make all regs required
iio: cdc: ad7150: relax return value check for IRQ get
iio: mb1232: relax return value check for IRQ get
iio: adc: fix the return value handle for platform_get_irq()
tools: iio: iio_generic_buffer: Fix some integer type and calculation
iio: potentiometer: mcp4531: Use i2c_get_match_data()
iio: potentiometer: mcp4018: Use i2c_get_match_data()
iio: core: Fix issues and style of the comments
iio: core: Switch to krealloc_array()
...
Correct spelling problems as identified by codespell.
Correct one grammar error.
Fixes: 9a93de620e ("docs: ABI: testing: Document the SBEFIFO timeout interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230710052305.29611-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Support for Wireless USB and Ultra WideBand was removed in 2020 by
commit caa6772db4 ("Staging: remove wusbcore and UWB from the kernel
tree."). But the documentation files were left behind.
Let's get rid of that out-of-date documentation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/015d4310-bcd3-4ba4-9a0e-3664f281a9be@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the sysfs attributes description provided by HCCS driver on
Kunpeng SoC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The mailing list on 01.org does not work anymore and the whole site
redirects to intel.com Open Source page so replace the 01.org address
with my email address.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Add Base GDS mitigation
* Support GDS_NO under KVM
* Fix a documentation typo
-----BEGIN PGP SIGNATURE-----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=ZAPY
-----END PGP SIGNATURE-----
Merge tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/gds fixes from Dave Hansen:
"Mitigate Gather Data Sampling issue:
- Add Base GDS mitigation
- Support GDS_NO under KVM
- Fix a documentation typo"
* tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix backwards on/off logic about YMM support
KVM: Add GDS_NO support to KVM
x86/speculation: Add Kconfig option for GDS
x86/speculation: Add force option to GDS mitigation
x86/speculation: Add Gather Data Sampling mitigation
The codeaurora.org email domain is defunct and will bounce.
Update entries to Sinan's kernel.org address which is the address in
MAINTAINERS for this component.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some
sysfs files when the necessary support is missing. Update the ABI
documentation around this as well.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCZMvhjwAKCRAPzq5USduL
dnifAQC9cl8R0bHhphAMstXUb9/GNh2Vxojr+MJkQweKRtc33gEAhjVVCyZ1mEHh
cWjVhtCwIYp/k3h8smBZ2VmK0wXc0wA=
=kAni
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some
sysfs files when the necessary support is missing. Update the ABI
documentation around this as well.
* tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/memdev: Only show sanitize sysfs files when supported
cxl/memdev: Document security state in kern-doc
cxl/memdev: Improve sanitize ABI descriptions
@codeaurora.org email addresses are no longer valid and will bounce to
sender. Also, Bhaumik has previously indicated he is no longer interested
in participating in MHI bus discussions.
Update contact info from Bhaumik to the mhi mail list so that mails will
be routed to the MHI maintainers and interested parties.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230628182346.3855-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Commit 273df864cf ("ima: Check against blacklisted hashes for files with
modsig") introduced an appraise_flag option for referencing the blacklist
keyring. Any matching binary found on this keyring fails signature
validation. This flag only works with module appended signatures.
An important part of a PKI infrastructure is to have the ability to do
revocation at a later time should a vulnerability be found. Expand the
revocation flag usage to all appraisal functions. The flag is now
enabled by default. Setting the flag with an IMA policy has been
deprecated. Without a revocation capability like this in place, only
authenticity can be maintained. With this change, integrity can now be
achieved with digital signature based IMA appraisal.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
We need the USB fixes in here for testing and for other patches to be
applied on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the device does not support Sanitize or Secure Erase commands,
hide the respective sysfs interfaces such that the operation can
never be attempted.
In order to be generic, keep track of the enabled security commands
found in the CEL - the driver does not support Security Passthrough.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-4-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Be more detailed about the CPU cache management situation. The same
goes for both sanitize and secure erase.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-2-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Add support to the /sys/devices/system/cpu/smt/control interface for
enabling a specified number of SMT threads per core, including partial
SMT states where not all threads are brought online.
The current interface accepts "on" and "off", to enable either 1 or all
SMT threads per core.
This commit allows writing an integer, between 1 and the number of SMT
threads supported by the machine. Writing 1 is a synonym for "off", 2 or
more enables SMT with the specified number of threads.
When reading the file, if all threads are online "on" is returned, to
avoid changing behaviour for existing users. If some other number of
threads is online then the integer value is returned.
Architectures like x86 only supporting 1 thread or all threads, should not
define CONFIG_SMT_NUM_THREADS_DYNAMIC. Architecture supporting partial SMT
states, like PowerPC, should define it.
[ ldufour: Slightly reword the commit's description ]
[ ldufour: Remove switch() in __store_smt_control() ]
[ ldufour: Rix build issue in control_show() ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-8-ldufour@linux.ibm.com
When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list. Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first. However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first. As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.
To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable. The default is still
10, but it can be overridden via a module parameter.
This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
This patch allows users to set up MIDI 1.0 ports more flexibly.
Namely, instead of the fixed mapping only from FB 0, now multiple
block definitions are applied to build up the MIDI 1.0 mapping.
The each block config has midi1_first_group and midi1_num_groups
attributes, and those specify which Groups are used for MIDI 1.0.
Those fields must be within the UMP Groups defined in the block
itself.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230725062206.9674-8-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the support of configfs to MIDI 2.0 function driver
for users to allow configuring the UMP Endpoint and Function Blocks
more flexibly. The configuration is in a tree form. The top-most
contains some card-level configurations. UMP Endpoints are defined in
subdirectories (ep.0, ep.1, etc) that contain Endpoint-specific
configurations such as ep_name, etc. And, UMP Function Blocks are
defined in the subdirectories (block.0, block.1, etc) under EP
subdirectory. As default, the driver creates a single UMP Endpoint
(ep.0) and a single Function Block (block.0) to work in a minimalistic
manner. User can modify those attributes freely to fit with the
demands.
When multiple Function Blocks are required, user can create another
directory as block.1, block.2, and so on (up to block.31). A block.*
directory can be deleted dynamically, too. A caveat is that the block
number has to be continuous.
Similarly, when multiple UMP Endpoints are required, user can create
another directory as ep.1, ep.2, up to ep.3.
Also, some driver behavior can be controlled in the card top-level
configs. e.g. you can pass process_ump=0 to disable the processing of
UMP Stream messages. This would be equivalent with the older MIDI 2.0
spec that doesn't support UMP v1.1 features.
The configfs interface checks upper- / lower-bound of input values,
and more sanity checks are performed at binding.
Attributes can't be changed any longer once when the instance is
linked to UDC.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230725062206.9674-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interest among UFS users in HPB has reduced significantly. I am not aware
of any current users of the HPB functionality. Hence remove HPB support
from the kernel.
A note: the work in JEDEC on a successor for HPB is nearing completion.
Zoned storage for UFS or ZUFS combines the UFS standard with ZBC-2.
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: ChanWoo Lee <cw9316.lee@samsung.com>
Cc: Daejun Park <daejun7.park@samsung.com>
Cc: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230719165758.2787573-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are devices (such as Murata IRS-D200 PIR proximity sensor) that
check the data signal with a running period. I.e. for a specified time,
they count the number of conditions that have occurred, and then signal
if that is more than a specified amount.
`IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is
therefore not suitable for these devices. Add a new `iio_event_info`
`IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also
add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the
number of conditions that must occur during this running period.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The literal blocks in this file lacked the necessary blank line at the top,
causing Sphinx to complain:
/Documentation/ABI/testing/sysfs-bus-nvdimm:11: WARNING: Unexpected indentation.
Add the lines it's longing for and bring about a bit of warning peace.
Reported-by: Hu Haowen <src.res.211@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Under some circumstances, firmware in the QAT devices could become
unresponsive. The Heartbeat feature provides a mechanism to detect
unresponsive devices.
The QAT FW periodically writes to memory a set of counters that allow
to detect the liveness of a device. This patch adds logic to enable
the reporting of those counters, analyze them and report if a device
is alive or not.
In particular this adds
(1) heartbeat enabling, reading and detection logic
(2) reporting of heartbeat status and configuration via debugfs
(3) documentation for the newly created sysfs entries
(4) configuration of FW settings related to heartbeat, e.g. tick period
(5) logic to convert time in ms (provided by the user) to clock ticks
This patch introduces a new folder in debugfs called heartbeat with the
following attributes:
- status
- queries_sent
- queries_failed
- config
All attributes except config are reading only. In particular:
- `status` file returns 0 when device is operational and -1 otherwise.
- `queries_sent` returns the total number of heartbeat queries sent.
- `queries_failed` returns the total number of heartbeat queries failed.
- `config` allows to adjust the frequency at which the firmware writes
counters to memory. This period is given in milliseconds and it is
fixed for GEN4 devices.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose FW counters statistics by providing the "fw_counters" file
under debugfs. Currently the statistics include the number of
requests sent to the FW and the number of responses received
from the FW for each Acceleration Engine, for all the QAT product
line.
This patch is based on earlier work done by Marco Chiappero.
Co-developed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it's not always obvious what PSP bootloader or TEE version are
present in OEM systems, add the ability to get this information from
sysfs for supported platforms.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Introduce a list of generic reset sources and use them to export the
power on reason through sysfs. Update the ABI documentation to describe
this new interface.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[Miquel Raynal: Follow-up on Kamel's work, 4 years later]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Modify the sysfs attribute description in ABI/stable documentation for
the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062823.1743180-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose various CPU and dGPU tunables that are available on many ASUS
ROG laptops. The tunables shown in sysfs will vary depending on the CPU
and dGPU vendor.
All of these variables are write only and there is no easy way to find
what the defaults are. In general they seem to default to the max value
the vendor sets for the CPU and dGPU package - this is not the same as
the min/max writable value. Values written to these variables that are
beyond the capabilities of the CPU are ignored by the laptop.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Support changing the mini-LED mode on some of the newer ASUS laptops.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-8-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Exposes the WMI method which tells if the eGPU is properly connected
on the devices that support it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-5-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Expose a WMI method in sysfs platform for showing which connected
charger the laptop is currently using.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update sysfs-class-firmware-attributes with hp-bioscfg information
HP BIOS Configuration driver purpose is to provide a driver supporting
the latest sysfs class firmware attributes framework allowing the user
to change BIOS settings and security solutions on HP Inc.’s commercial
notebooks.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230608163319.18934-2-jorge.lopez2@hp.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZKmgXAAKCRDdBJ7gKXxA
joqDAP0V520Jy0cyJrRMvaQRFMqtVeDOdTpAue7ZOQHSi/LZnAD9EEAxDpYF/V4x
PO27ixXQ4Glm2iYgH7bDX7J73WiA3wg=
=JsYW
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update all related documentation pointers to reflect the
change.
Link: https://lkml.kernel.org/r/20230628013437.47030-3-ailiop@suse.com
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9yzk
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
Switch to the quicinc.com id.
Fixes: bd1af6b5ff ("Documentation: ABI: sysfs-class-net-qmi: document pass-through file")
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the common
definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZJ9fkQAKCRDfioYZHlFs
ZyWcAP9THJ6ZzX1mbAfHhPz9r+oxsrE3l1jQpNjNbh7MNW29MAEA36dmTE62JaHK
lTPDgHxqBt1vrHPktYWOM9ZPHE2tLwA=
=3fFL
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
API:
- Add linear akcipher/sig API.
- Add tfm cloning (hmac, cmac).
- Add statesize to crypto_ahash.
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA.
- Replace LFSR with SHA3-256 in jitter.
- Add interface for gathering of raw entropy in jitter.
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio.
- Add hash and HMAC support in starfive.
- Add RSA algo support in starfive.
- Add support for PCI device 0x156E in ccp.
-----BEGIN PGP SIGNATURE-----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=rOLu
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add linear akcipher/sig API
- Add tfm cloning (hmac, cmac)
- Add statesize to crypto_ahash
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA
- Replace LFSR with SHA3-256 in jitter
- Add interface for gathering of raw entropy in jitter
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio
- Add hash and HMAC support in starfive
- Add RSA algo support in starfive
- Add support for PCI device 0x156E in ccp"
* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
crypto: akcipher - Do not copy dst if it is NULL
crypto: sig - Fix verify call
crypto: akcipher - Set request tfm on sync path
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
hwrng: st - keep clock enabled while hwrng is registered
hwrng: st - support compile-testing
hwrng: imx-rngc - fix the timeout for init and self check
KEYS: asymmetric: Use new crypto interface without scatterlists
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: Add forward declaration in asymmetric-parser.h
crypto: sig - Add interface for sign/verify
crypto: akcipher - Add sync interface without SG lists
crypto: cipher - On clone do crypto_mod_get()
crypto: api - Add __crypto_alloc_tfmgfp
crypto: api - Remove crypto_init_ops()
crypto: rsa - allow only odd e and restrict value in FIPS mode
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: algboss - Add missing dependency on RNG2
crypto: starfive - Add RSA algo support
...
Highlights:
- AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
- Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
- Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc. improvements
- Dell-DDV: Add documentation
- INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
- Lenovo Yogabook: Refactor / rework to also support Android models
- Think-LMI: Multiple improvements and fixes
- WMI: Add proper API documentation for the WMI bus
- x86-android-tablets: Misc. new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Fix usage counter
- Reset default callback on unregister
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
apple-gmux:
- don't use be32_to_cpu and cpu_to_be32
asus-tf103c-dock:
- Switch back to use struct i2c_driver's .probe()
dell-ddv:
- Update ABI documentation
- Add documentation
dell-sysman:
- Improve instance detection
gigabyte:
- constify pointers to hwmon_channel_info
gigabyte-wmi:
- remove allowlist
hp:
- constify pointers to hwmon_channel_info
hp-wmi:
- Add thermal profile for Victus 16-d1xxx
- Add HP Envy special key support
- Add HP WMI camera switch
int3472:
- discrete: Log a warning if the pin-numbers don't match
- discrete: Use FIELD_GET() on the GPIO _DSM return value
- discrete: Add alternative "AVDD" regulator supply name
- discrete: Add support for 1 GPIO regulator shared between 2 sensors
- discrete: Remove sensor_config-s
- discrete: Drop GPIO remapping support
- Switch back to use struct i2c_driver's .probe()
- Evaluate device's _DSM method to control imaging clock
intel/pmc:
- Add Meteor Lake IOE-M PMC related maps
- Add Meteor Lake IOE-P PMC related maps
- Use SSRAM to discover pwrm base address of primary PMC
- Discover PMC devices
- Enable debugfs multiple PMC support
- Add support to handle multiple PMCs
- Combine core_init() and core_configure()
- Update maps for Meteor Lake P/M platforms
- Remove Meteor Lake S platform support
lenovo-yogabook:
- add I2C dependency
- Rename lenovo-yogabook-wmi to lenovo-yogabook
- Add keyboard backlight control to platform driver
- Add platform driver support
- Add YB_KBD_BL_MAX define
- Group WMI specific code together
- Drop _wmi_ from remaining generic symbols
- Add a yogabook_toggle_digitizer_mode() helper function
- Abstract kbd backlight setting
- Stop checking adev->power.state
- Split probe() into generic and WMI specific parts
- Use PMIC LED driver for pen icon LED control
- Add dev local variable to probe()
- Store dev instead of wdev in drvdata struct
- Switch to DEFINE_SIMPLE_DEV_PM_OPS()
- Simplify gpio lookup table cleanup
- Set default keyboard backligh brightness on probe()
- Reprobe devices on remove()
- Fix work race on remove()
mlxbf-bootctl:
- Add sysfs file for BlueField boot log
platform/surface:
- surface3_power: Switch back to use struct i2c_driver's .probe()
platform/x86/amd:
- pmc: Update metrics table info for Pink Sardine
- pmc: Add helper function to check the cpu id
- pmc: Get STB DRAM size from PMFW
- pmc: Pass true/false to bool argument
platform/x86/amd/pmf:
- Fix compiler warnings in static slider
- Add PMF debug facilities
- Add PMF acpi debug support
platform/x86/dell/dell-rbtn:
- Fix resources leaking on error path
platform/x86/intel:
- tpmi: Remove hardcoded unit and offset
platform/x86/intel-uncore-freq:
- tpmi: Provide cluster level control
- Support for cluster level controls
- Uncore frequency control via TPMI
platform/x86/intel/pmc:
- Add resume callback
platform/x86/intel/pmc/mtl:
- Put devices in D3 during resume
system76:
- constify pointers to hwmon_channel_info
think-lmi:
- Don't display unnecessary authentication settings
- Correct NVME index default
- Correct NVME password handling
- Update password fields to use BIT
- Update password attribute comments
- Correct System password interface
- Enable opcode support on BIOS settings
- mutex protection around multiple WMI calls
thinkpad_acpi:
- Fix lkp-tests warnings for platform profiles
tools/power/x86/intel-speed-select:
- v1.16 release
- Fix json formatting issue
- Adjust scope of core-power config
toshiba:
- constify pointers to hwmon_channel_info
wmi:
- Allow retrieving the number of WMI object instances
- Add device specific documentation
- Add documentation
- Mark GUID-based WMI interface as deprecated
- Add kernel doc comments
x86-android-tablets:
- Add support for extra buttons on Cyberbook T116
- Add support for more then 1 gpio_key
- Add Lenovo Yoga Book lid switch
- Fix Bluetooth on Lenovo Yoga Book
- Add Nextbook Ares 8A data
- Remove unnecessary invalid_aei_gpiochip settings
- Add ALS sensor support for Yoga Tablet 2 1050/830 series
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSdSpoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xd8gf/eJ9BFzUfA8otMPcjEHZWOr6TkL3u
P0C3ITatLhLk4Y5BkQ3iQlelJlcEflYF8VDT9Xfrm086aJLI57Dv5NWvyzsVBb20
CD+5ojdASAsgeoNYO4dIEB7G8gIibvGeH7xGb+oZBl8xaVLWbBHfl4pXPSi/iGzn
33aB5yaL0v0Uveb2kQrMmQ1P4APKNCvYuoi6u6zUmansLFWpQ3NbdME/bCyqW+qx
fTNfjjuNcRBlbK4Pvf5x9tT8xzPFz0YATOe/TTyL4K490aShEnXHBio2F9FAuzib
7FeStlhUGzQuF2LabgLiBw16j/Kr5XR37eukSwY8jVvZCQCqvTRBfbgM2g==
=H1S7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc improvements
Dell-DDV: Add documentation
INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
Lenovo Yogabook:
- Refactor / rework to also support Android models
Think-LMI:
- Multiple improvements and fixes
WMI:
- Add proper API documentation for the WMI bus
x86-android-tablets:
- Misc new hw support
Miscellaneous other cleanups / fixes"
* tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits)
platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps
platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps
platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC
platform/x86:intel/pmc: Discover PMC devices
platform/x86:intel/pmc: Enable debugfs multiple PMC support
platform/x86:intel/pmc: Add support to handle multiple PMCs
platform/x86:intel/pmc: Combine core_init() and core_configure()
platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms
platform/x86/intel: tpmi: Remove hardcoded unit and offset
platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match
platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value
platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name
platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors
platform/x86: int3472: discrete: Remove sensor_config-s
platform/x86: int3472: discrete: Drop GPIO remapping support
platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32
platform/x86/dell/dell-rbtn: Fix resources leaking on error path
platform/x86: ISST: Fix usage counter
platform/x86: ISST: Reset default callback on unregister
platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
...
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
Add the first typical (non-sanitization) consumer of the new background
command infrastructure, firmware update. Given both firmware-update and
sanitization were developed in parallel from the common
background-command baseline, resolve some minor context conflicts.
The sysfs based firmware loader mechanism was created to easily allow
userspace to upload firmware images to FPGA cards. This also happens to
be pretty suitable to create a user-initiated but kernel-controlled
firmware update mechanism for CXL devices, using the CXL specified
mailbox commands.
Since firmware update commands can be long-running, and can be processed
in the background by the endpoint device, it is desirable to have the
ability to chunk the firmware transfer down to smaller pieces, so that
one operation does not monopolize the mailbox, locking out any other
long running background commands entirely - e.g. security commands like
'sanitize' or poison scanning operations.
The firmware loader mechanism allows a natural way to perform this
chunking, as after each mailbox command, that is restricted to the
maximum mailbox payload size, the cxl memdev driver relinquishes control
back to the fw_loader system and awaits the next chunk of data to
transfer. This opens opportunities for other background commands to
access the mailbox and send their own slices of background commands.
Add the necessary helpers and state tracking to be able to perform the
'Get FW Info', 'Transfer FW', and 'Activate FW' mailbox commands as
described in the CXL spec. Wire these up to the firmware loader
callbacks, and register with that system to create the memX/firmware/
sysfs ABI.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-1-c6265bd7343b@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement support for the non-pmem exclusive secure erase, per
CXL specs. Create a write-only 'security/erase' sysfs file to
perform the requested operation.
As with the sanitation this requires the device being offline
and thus no active HPA-DPA decoding.
The expectation is that userspace can use it such as:
cxl disable-memdev memX
echo 1 > /sys/bus/cxl/devices/memX/security/erase
cxl enable-memdev memX
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230612181038.14421-7-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement support for CXL 3.0 8.2.9.8.5.1 Sanitize. This is done by
adding a security/sanitize' memdev sysfs file to trigger the operation
and extend the status file to make it poll(2)-capable for completion.
Unlike all other background commands, this is the only operation that
is special and monopolizes the device for long periods of time.
In addition to the traditional pmem security requirements, all regions
must also be offline in order to perform the operation. This permits
avoiding explicit global CPU cache management, relying instead on the
implict cache management when a region transitions between
CXL_CONFIG_ACTIVE and CXL_CONFIG_COMMIT.
The expectation is that userspace can use it such as:
cxl disable-memdev memX
echo 1 > /sys/bus/cxl/devices/memX/security/sanitize
cxl wait-sanitize memX
cxl enable-memdev memX
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230612181038.14421-5-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a read-only sysfs file to display the security state
of a device (currently only pmem):
/sys/bus/cxl/devices/memX/security/state
This introduces a cxl_security_state structure that is
to be the placeholder for common CXL security features.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230612181038.14421-3-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Document newly introduced modes and entry for the LED netdev trigger.
Add documentation for new modes:
- link_10
- link_100
- link_1000
- half_duplex
- full_duplex
Add documentation for new entry:
- hw_control
Also add additional info for the interval entry and the tx/rx modes with
the special case of hw_control ON.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230621092653.23172-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CoreSight and hwtracing subsystem updates for v6.5 includes:
- Fixes to the CTI module reference leaks. This involves,
redesign of how the helper devices are tracked and CTI
devices have been converted to helper devices.
- Fix removal of the trctraceidr file from sysfs for ETMs.
- Match all ETMv4 instances based on the ETMv4 architected
registers and the CoreSight Component ID (CID), than having
to add individual PIDs for CPUs.
- Add support for Dummy CoreSight source and sink drivers.
- Add James Clark as Reviewer for the CoreSight kernel drivers
- Fixes to HiSilicon PCIe Tune and Trace Device driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=XWfo
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.5
CoreSight and hwtracing subsystem updates for v6.5 includes:
- Fixes to the CTI module reference leaks. This involves,
redesign of how the helper devices are tracked and CTI
devices have been converted to helper devices.
- Fix removal of the trctraceidr file from sysfs for ETMs.
- Match all ETMv4 instances based on the ETMv4 architected
registers and the CoreSight Component ID (CID), than having
to add individual PIDs for CPUs.
- Add support for Dummy CoreSight source and sink drivers.
- Add James Clark as Reviewer for the CoreSight kernel drivers
- Fixes to HiSilicon PCIe Tune and Trace Device driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits)
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
Documentation: trace: Add documentation for Coresight Dummy Trace
dt-bindings: arm: Add support for Coresight dummy trace
Coresight: Add coresight dummy driver
MAINTAINERS: coresight: Add James Clark as Reviewer
coresight: etm4x: Match all ETM4 instances based on DEVARCH and DEVTYPE
coresight: etm4x: Make etm4_remove_dev() return void
coresight: etm4x: Fix missing trctraceidr file in sysfs
coresight: Fix CTI module refcount leak by making it a helper device
coresight: Enable and disable helper devices adjacent to the path
coresight: Refactor out buffer allocation function for ETR
coresight: Make refcount a property of the connection
coresight: Store in-connections as well as out-connections
coresight: Simplify connection fixup mechanism
coresight: Store pointers to connections rather than an array of them
...
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/arm64 into arch/ (along with the Chinese equvalent
translations) and fix up documentation references.
Cc: Will Deacon <will@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <src.res@email.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Yantengsi <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The PTT can only filter the traced TLP headers by the Root Ports or the
Requester ID of the Endpoint, which are located on the same PCIe core of
the PTT device. The filter value used is derived from the BDF number of
the supported Root Port or the Endpoint. It's not friendly enough for the
users since it requires the user to be familiar enough with the platform
and calculate the filter value manually.
This patch export the available filters through sysfs. Each available
filters is presented as an individual file with the name of the BDF
number of the related PCIe device. The files are created under
$(PTT PMU dir)/available_root_port_filters and
$(PTT PMU dir)/available_requester_filters respectively. The filter
value can be known by reading the related file.
Then the users can easily know the available filters for trace and get
the filter values without calculating.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230621092804.15120-4-yangyicong@huawei.com
There are three flags that control Write Booster Feature:
1. WB ON/OFF
2. WB Hibern Flush ON/OFF (implicitly)
3. WB Flush ON/OFF (explicit)
In the case of "Hibern Flush", one of the conditions for flush WB buffer is
that avail_wb_buff < wb_flush_threshold.
As we know, different users have different requirements for power
consumption and performance. Therefore, we need the ability to manually set
wb_flush_threshold, so that users can easily and flexibly adjust the
wb_flush_threshold value, thereby achieving a balance between power
consumption and performance.
So the sysfs attribute that controls this is necessary.
wb_flush_threshold represents the threshold for flushing WB buffer, whose
value expressed in unit of 10% granularity, such as '1' representing 10%,
'2' representing 20%, and so on.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230613022240.16595-1-luhongfei@vivo.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Expose 'pm_idle_enabled' sysfs attribute. This attribute controls how
idle conditions are handled. If it is set to 1 (idle support enabled)
when the device detects an idle condition, the driver will transition
the device to the 'MIN' power configuration.
In order to set the value of this attribute for a device, the device
must be in the 'down' state.
This only applies to qat_4xxx generation.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A QAT GEN4 device can be currently configured for crypto (sym;asym) or
compression (dc).
This patch extends the configuration to support more variations of these
services, download the correct FW images on the device and report the
correct capabilities on the device based on the configured service.
The device can now be configured with the following services:
"sym", "asym", "dc", "sym;asym", "asym;sym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym".
With this change, the configuration "sym", "asym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym" will be accessible only via userspace, i.e. the driver
for those configurations will not register into the crypto framework.
Support for such configurations in kernel will be enabled in a later
patch.
The pairs "sym;asym" and "asym;sym" result in identical device config.
As do "sym;dc", "dc;sym", and "asym;dc", "dc;asym".
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose usb device state to userland as the information is useful in
detecting non-compliant setups and diagnosing enumeration failures.
For example:
- End-to-end signal integrity issues: the device would fail port reset
repeatedly and thus be stuck in POWERED state.
- Charge-only cables (missing D+/D- lines): the device would never enter
POWERED state as the HC would not see any pullup.
What's the status quo?
We do have error logs such as "Cannot enable. Maybe the USB cable is bad?"
to flag potential setup issues, but there's no good way to expose them to
userspace.
Why add a sysfs entry in struct usb_port instead of struct usb_device?
The struct usb_device is not device_add() to the system until it's in
ADDRESS state hence we would miss the first two states. The struct
usb_port is a better place to keep the information because its life
cycle is longer than the struct usb_device that is attached to the port.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202306042228.e532af6e-oliver.sang@intel.com
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roy Luo <royluo@google.com>
Message-ID: <20230608015913.1679984-1-royluo@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8254 Programmable Interval Timer
(PIT).
The Intel 8254 PIT first appeared in the early 1980s and was used
initially in IBM PC compatibles. The popularity of the original Intel
825x family of chips led to many subsequent variants and clones of the
interface in various chips and integrated circuits. Although still
popular, interfaces compatible with the Intel 8254 PIT are nowdays
typically found embedded in larger VLSI processing chips and FPGA
components rather than as discrete ICs.
A CONFIG_I8254 Kconfig option is introduced by this patch. Modules
wanting access to these i8254 library functions should select this
Kconfig option, and import the I8254 symbol namespace.
Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The NVME/HDD index used by WMI starts at 1 so corrected the default
appropriately.
Note, zero index is still permitted in case it is required on future
platforms.
Documentation updated correspondingly
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-7-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds support for AWINIC AW20036/AW20054/AW20072 LED driver.
This driver supports following AW200XX features:
- Individual 64-level DIM currents
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230519130403.212479-3-mmkurbanov@sberdevices.ru
Signed-off-by: Lee Jones <lee@kernel.org>
The eud sysfs enablement path is currently mentioned in the
Documentation as:
/sys/bus/platform/drivers/eud/.../enable
Instead it should be:
/sys/bus/platform/drivers/qcom_eud/.../enable
Fix the same.
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230517211756.2483552-2-bhupesh.sharma@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the sysfs scsi_device attribute cdl_enable to allow a user to enable or
disable a device command duration limits feature. CDL is disabled by
default. This feature must be explicitly enabled by a user by setting the
cdl_enable attribute to 1.
The new function scsi_cdl_enable() does not do anything beside setting the
cdl_enable field of struct scsi_device in the case of a (real) SCSI device
(e.g. a SAS HDD). For ATA devices, the command duration limits feature
needs to be enabled/disabled using the ATA feature sub-page of the control
mode page. To do so, the scsi_cdl_enable() function checks if this mode
page is supported using scsi_mode_sense(). If it is, scsi_mode_select() is
used to enable and disable CDL.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-10-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce the function scsi_cdl_check() to detect if a device supports
command duration limits (CDL). Support for the READ 16, WRITE 16, READ 32
and WRITE 32 commands are checked using the function scsi_report_opcode()
to probe the rwcdlp and cdlp bits as they indicate the mode page defining
the command duration limits descriptors that apply to the command being
tested.
If any of these commands support CDL, the field cdl_supported of struct
scsi_device is set to 1 to indicate that the device supports CDL.
Support for CDL for a device is advertizes through sysfs using the new
cdl_supported device attribute. This attribute value is 1 for a device
supporting CDL and 0 otherwise.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-9-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit adds sysfs interface to be used to write into the
boot log which is 1KB HW buffer on BlueField SoC. The same log
buffer is also used by firmware code like ATF/UEFI, and can be
displayed by userspace tools or from external host via USB/PCIe.
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230511144924.171585-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Synchronize the ABI documentation with the driver documentation
and direct users to the latter in case the search for more
detailed information.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230508204241.11076-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a place for device-specific documentation of WMI drivers.
The first entry is documentation for the wmi-bmof driver, with
additional documentation being expected to follow.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230424222939.208137-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities, DSA
2.0 Event Log and completion record faulting features and new DSA
operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4
-----BEGIN PGP SIGNATURE-----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=Vqrw
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
- Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle
mailbox) to be a facility of the PCI core rather than the CXL core.
This is foundational for upcoming support for PCI device-attestation and
PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders. This enabling uses trace-events to convey CXL media error
records to user tooling. It includes translation of device-local
addresses (DPA) to system physical addresses (SPA) and their
corresponding CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZE2nNwAKCRDfioYZHlFs
Z5c2AQCTWebok6CD+HN01xnIx+CBWAUQe0QIGR40dT2P6/WGEgEA8wMae0w/FDlc
lQDvSoIyPvy1hGO7Ppb0K2AT6jrQAgU=
=blcC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost breaks
even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa
GEkPWjrROueCom7xbLMu
=eR+P
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
"biggest" thing in here is the removal of two obsolete drivers, u132-hcd
and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqC+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynP6QCg0MnpRjOSFyAB0t9LWFng4rRikj4AoIpxvs2T
GbU7NdPHU3fddq0KB+Nd
=M+Ib
-----END PGP SIGNATURE-----
Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JhWj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- import a bunch of HID selftests from out-of-tree hid-tools project
(Benjamin Tissoires)
- drastically reducing Bluetooth disconnects on hid-nintendo driven
devices (Daniel J. Ogorchock)
- lazy initialization of battery interfaces in wacom driver (Jason
Gerecke)
- generic support for all Kye tablets (David Yang)
- proper rumble queue overrun handling in hid-nintendo (Daniel J.
Ogorchock)
- support for ADC measurement in logitech-hidpp driver (Bastien Nocera)
- reset GPIO support in i2c-hid (Hans de Goede)
- improved handling of generic "Digitizer" usage (Jason Gerecke)
- support for KEY_CAMERA_FOCUS (Feng Qi)
- quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie)
- assorted functional fixes and device ID additions
* tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
HID: amd_sfh: Fix max supported HID devices
HID: wacom: generic: Set battery quirk only when we see battery data
HID: wacom: Lazy-init batteries
HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA
HID: asus: explicitly include linux/leds.h
HID: lg-g15: explicitly include linux/leds.h
HID: steelseries: explicitly include linux/leds.h
HID: apple: Set the tilde quirk flag on the Geyser 3
HID: apple: explicitly include linux/leds.h
HID: mcp2221: fix get and get_direction for gpio
HID: mcp2221: fix report layout for gpio get
HID: wacom: Set a default resolution for older tablets
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Consistenly use dev local variable in probe()
HID: kye: Fix rdesc for kye tablets
HID: amd_sfh: Support for additional light sensor
HID: amd_sfh: Handle "no sensors" enabled for SFH1.1
HID: amd_sfh: Increase sensor command timeout for SFH1.1
HID: amd_sfh: Correct the stop all command
...
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
In this round, we've mainly modified to support non-power-of-two zone size,
which is not required for f2fs by design. In order to avoid arch dependency,
we refactored the messy rb_entry structure shared across different extent_cache.
In addition to the improvement, we've also fixed several subtle bugs and
error cases.
Enhancement:
- support non-power-of-two zone size for zoned device
- remove sharing the rb_entry structure in extent cache
- refactor f2fs_gc to call checkpoint in urgent condition
- support iopoll
Bug fix:
- fix potential corruption when moving a directory
- fix to avoid use-after-free for cached IPU bio
- fix the folio private usage
- avoid kernel warnings or panics in the cp_error case
- fix to recover quota data correctly
- fix some bugs in atomic operations
- fix system crash due to lack of free space in LFS
- fix null pointer panic in tracepoint in __replace_atomic_write_block
- fix iostat lock protection
- fix scheduling while atomic in decompression path
- preserve direct write semantics when buffering is forced
- fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()
-----BEGIN PGP SIGNATURE-----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=qHTl
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this round, we've mainly modified to support non-power-of-two zone
size, which is not required for f2fs by design. In order to avoid arch
dependency, we refactored the messy rb_entry structure shared across
different extent_cache. In addition to the improvement, we've also
fixed several subtle bugs and error cases.
Enhancements:
- support non-power-of-two zone size for zoned device
- remove sharing the rb_entry structure in extent cache
- refactor f2fs_gc to call checkpoint in urgent condition
- support iopoll
Bug fixes:
- fix potential corruption when moving a directory
- fix to avoid use-after-free for cached IPU bio
- fix the folio private usage
- avoid kernel warnings or panics in the cp_error case
- fix to recover quota data correctly
- fix some bugs in atomic operations
- fix system crash due to lack of free space in LFS
- fix null pointer panic in tracepoint in __replace_atomic_write_block
- fix iostat lock protection
- fix scheduling while atomic in decompression path
- preserve direct write semantics when buffering is forced
- fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()"
* tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: remove unnessary comment in __may_age_extent_tree
f2fs: allocate node blocks for atomic write block replacement
f2fs: use cow inode data when updating atomic write
f2fs: remove power-of-two limitation of zoned device
f2fs: allocate trace path buffer from names_cache
f2fs: add has_enough_free_secs()
f2fs: relax sanity check if checkpoint is corrupted
f2fs: refactor f2fs_gc to call checkpoint in urgent condition
f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio
f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del()
f2fs: support iopoll method
f2fs: remove batched_trim_sections node description
f2fs: fix to check return value of inc_valid_block_count()
f2fs: fix to check return value of f2fs_do_truncate_blocks()
f2fs: fix passing relative address when discard zones
f2fs: fix potential corruption when moving a directory
f2fs: add radix_tree_preload_end in error case
f2fs: fix to recover quota data correctly
f2fs: fix to check readonly condition correctly
docs: f2fs: Correct instruction to disable checkpoint
...
This commit adds cascade_counts_enable and external_input_phase_
clock_select items to counter ABI file.
(e.g. for Renesas MTU3 hardware used for phase counting).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-4-biju.das.jz@bp.renesas.com
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRGvX4SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxcwsQAK5wK1HWLZDap8nTGGAyvpX+bNJ3YM+l
TS1zSzWV97K6kq2bg4GTgDi6EXJJNgfP9sThOEIee5GrWAjrk9yaxjEyIcrUBjfl
oyFN8SEuYbMN5t9Bir3GRqkL+tWErUiVafplML6vTT8W8GlL2rbxPXM6ifmK9IJq
7r3Rt+tlMrookTzV+ykSGVmC5cpnlNGsvMlGGw91Z8rlICy7MI/ecg8O6Zsy25dR
Vchrg0M+jVxtaFU9/ikQaNHx0B3AF7fpi472CYYWgk1ABfIfNyQATeHsCkKan/ZV
i4+gfgIhIQnO1Ov/05aGYbBhxVpFGQIcLkG0vEmdbHsnC/WDuMCrr5wg1HCgCdpQ
+0eQem5bWxrzKp0g9tL07QG8LuiJTfjuA4DrRZNhudKFU9oglZfZeywRk+s6ta4v
rQFzz7qdlKpcM87pz/Bm8tSTc8UYNCDd7hLe+ZI940CMs/vQ4CfQJ2tlYaIl0AiO
q33Nz1iqhEycQ9OZDzBDyQtK+Xm6lsXUehIBtbqBsFsP3Ry+nxe/fz6UMs5tVNeM
BYaaNhhkiZMhXgJncMi2oR8/LRLYtOHjn1rdOGSMu9Rck5i5TVPsxqzUOzkhvuM9
eXAwts6SwFVYxtaPJs+i6yl8cdLOFORsntIBWFKuwsgH8BFx7pNFuZA33eMOA+Iw
UFey2fKDn3W5
=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
Highlights:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add driver for Yoga Tablet Mode switch:
- Add driver for Yoga Tablet Mode switch
Add intel_bytcrc_pwrsrc driver:
- Add intel_bytcrc_pwrsrc driver
Add new msi-ec driver:
- Add new msi-ec driver
Documentation/ABI:
- Update IFS ABI doc
ISST:
- unlock on error path in tpmi_sst_init()
- Add suspend/resume callbacks
- Add SST-TF support via TPMI
- Add SST-BF support via TPMI
- Add SST-PP support via TPMI
- Add SST-CP support via TPMI
- Parse SST MMIO and update instance
- Enumerate TPMI SST and create framework
- Add support for MSR 0x54
- Add API version of the target
- Add IOCTL default callback
- Add TPMI target
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge tag 'ib-pdx86-backlight-6.4' into review-hans:
- Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Move ideapad ACPI helpers to a new header:
- Move ideapad ACPI helpers to a new header
acer-wmi:
- Convert to platform remove callback returning void
acerhdf:
- Remove unneeded semicolon
adv_swbutton:
- Convert to platform remove callback returning void
amilo-rfkill:
- Convert to platform remove callback returning void
apple-gmux:
- Fix iomem_base __iomem annotation
- return -EFAULT if copy fails
- Update apple_gmux_detect documentation
- Add acpi_video_get_backlight_type() check
- add debugfs interface
- support MMIO gmux on T2 Macs
- refactor gmux types
- use first bit to check switch state
backlight:
- apple_bl: Use acpi_video_get_backlight_type()
barco-p50-gpio:
- Convert to platform remove callback returning void
classmate:
- mark SPI related data as maybe unused
compal-laptop:
- Convert to platform remove callback returning void
dell:
- dell-smo8800: Convert to platform remove callback returning void
- dcdbas: Convert to platform remove callback returning void
dell-laptop:
- Register ctl-led for speaker-mute
hp:
- tc1100-wmi: Convert to platform remove callback returning void
- hp_accel: Convert to platform remove callback returning void
huawei-wmi:
- Convert to platform remove callback returning void
ideapad-laptop:
- Convert to platform remove callback returning void
intel:
- vbtn: Convert to platform remove callback returning void
- telemetry: pltdrv: Convert to platform remove callback returning void
- pmc: core: Convert to platform remove callback returning void
- mrfld_pwrbtn: Convert to platform remove callback returning void
- int3472: discrete: Convert to platform remove callback returning void
- int1092: intel_sar: Convert to platform remove callback returning void
- int0002_vgpio: Convert to platform remove callback returning void
- hid: Convert to platform remove callback returning void
- chtwc_int33fe: Convert to platform remove callback returning void
- chtdc_ti_pwrbtn: Convert to platform remove callback returning void
- bxtwc_tmu: Convert to platform remove callback returning void
intel-uncore-freq:
- Add client processors
mlxbf-bootctl:
- Add sysfs file for BlueField boot fifo
pcengines-apuv2:
- Drop platform:pcengines-apuv2 module-alias
platform/mellanox:
- add firmware reset support
platform/olpc:
- olpc-xo175-ec: Use SPI device ID data to bind device
platform/surface:
- aggregator_registry: Add support for tablet-mode switch on Surface Pro 9
- aggregator_tabletsw: Add support for Type-Cover posture source
- aggregator_tabletsw: Properly handle different posture source IDs
platform/x86/amd:
- pmc: provide user message where s0ix is not supported
- pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
- pmc: Convert to platform remove callback returning void
- pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
- pmc: Move out of BIOS SMN pair for STB init
- pmc: Utilize SMN index 0 for driver probe
- pmc: Move idlemask check into `amd_pmc_idlemask_read`
- pmc: Don't dump data after resume from s0i3 on picasso
- pmc: Hide SMU version and program attributes for Picasso
- pmc: Don't try to read SMU version on Picasso
- pmf: core: Convert to platform remove callback returning void
- hsmp: Convert to platform remove callback returning void
platform/x86/amd/pmf:
- Move out of BIOS SMN pair for driver probe
platform/x86/intel:
- vsec: Use intel_vsec_dev_release() to simplify init() error cleanup
- vsec: Explicitly enable capabilities
platform/x86/intel/ifs:
- Update IFS doc
- Implement Array BIST test
- Sysfs interface for Array BIST
- Introduce Array Scan test to IFS
- IFS cleanup
- Reorganize driver data
- Separate ifs_pkg_auth from ifs_data
platform/x86/intel/pmc/mtl:
- Put GNA/IPU/VPU devices in D3
platform/x86/intel/pmt:
- Ignore uninitialized entries
- Add INTEL_PMT module namespace
platform/x86/intel/sdsi:
- Change mailbox timeout
samsung-q10:
- Convert to platform remove callback returning void
serial-multi-instantiate:
- Convert to platform remove callback returning void
sony:
- mark SPI related data as maybe unused
think-lmi:
- Remove unnecessary casts for attributes
- Remove custom kobject sysfs_ops
- Properly interpret return value of tlmi_setting
thinkpad_acpi:
- Fix Embedded Controller access on X380 Yoga
tools/power/x86/intel-speed-select:
- Update version
- Change TRL display for Emerald Rapids
- Identify Emerald Rapids
- Display AMX base frequency
- Use cgroup v2 isolation
- Add missing free cpuset
- Fix clos-max display with TPMI I/F
- Add cpu id check
- Avoid setting duplicate tdp level
- Remove cpu mask display for non-cpu power domain
- Hide invalid TRL level
- Display fact info for non-cpu power domain
- Show level 0 name for new api_version
- Prevent cpu clos config for non-cpu power domain
- Allow display non-cpu power domain info
- Display amx_p1 and cooling_type
- Display punit info
- Introduce TPMI interface support
- Get punit core mapping information
- Introduce api_version helper
- Support large clos_min/max
- Introduce is_debug_enabled()
- Allow api_version based platform callbacks
- Move send_mbox_cmd to isst-core-mbox.c
- Abstract adjust_uncore_freq
- Abstract read_pm_config
- Abstract clos_associate
- Abstract clos_get_assoc_status
- Abstract set_clos
- Abstract pm_get_clos
- Abstract pm_qos_config
- Abstract get_clos_information
- Abstract get_get_trls
- Enhance get_tdp_info
- Abstract get_uncore_p0_p1_info
- Abstract get_fact_info
- Abstract set_pbf_fact_status
- Remove isst_get_pbf_info_complete
- Abstract get_pbf_info
- Abstract set_tdp_level
- Abstract get_trl_bucket_info
- Abstract get_get_trl
- Abstract get_coremask_info
- Abstract get_tjmax_info
- Move code right before its caller
- Abstract get_pwr_info
- Abstract get_tdp_info
- Abstract get_ctdp_control
- Abstract get_config_levels
- Abstract is_punit_valid
- Introduce isst-core-mbox.c
- Always invoke isst_fill_platform_info
- Introduce isst_get_disp_freq_multiplier
- Move mbox functions to isst-core.c
- Improve isst_print_extended_platform_info
- Rename for_each_online_package_in_set
- Introduce support for multi-punit
- Introduce isst_is_punit_valid()
- Introduce punit to isst_id
- Follow TRL nameing for FACT info
- Unify TRL levels
wmi:
- Convert to platform remove callback returning void
x86-android-tablets:
- Add accelerometer support for Yoga Tablet 2 1050/830 series
- Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
- Add Wacom digitizer info for Lenovo Yoga Book
- Update Yoga Book HiDeep touchscreen comment
- Add Lenovo Yoga Book X90F/L data
- Share lp855x_platform_data between different models
- Use LP8557 in direct mode on both the Yoga 830 and the 1050
- Add depends on PMIC_OPREGION
- Lenovo Yoga Book match is for YB1-X91 models only
- Add LID switch support for Yoga Tablet 2 1050/830 series
- Add backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add touchscreen support for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for the Dolby button on Peaq C1010
- Add gpio_keys support to x86_android_tablet_init()
- Move remaining tablets to other.c
- Move Lenovo tablets to their own file
- Move Asus tablets to their own file
- Move shared power-supply fw-nodes to a separate file
- Move DMI match table into its own dmi.c file
- Move core code into new core.c file
- Move into its own subdir
- Add Acer Iconia One 7 B1-750 data
x86/include/asm/msr-index.h:
- Add IFS Array test bits
xo1-rfkill:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRGmK4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yBCAf+PebzfccC2ABHq+nFGSok18beRtFf
fGs9NI21Mjdbhhy+KsKddgZceh7pbdcaIznuka3TZAK0UXcHRe30X3eoDvSCk9YW
Xj/Uf3ExsipNh1Ung+Q1qTWtzUw7XdJWqMZ5HxlUI2ZlmSTAIOyZBpSEPrK052oi
lAbSqrnB1DEh1qYV4Q7g71R82iAR791DAH1dsDZwC1Zb6KK6fxI/zQhw4JP1XSCs
htE5RFUzPWiXG2ou5t6Nteju/QqEaCoIS7z7ZK/SgWcLlPxeksxwso3obI/U8PvD
JMmMiY4VFzizuGqTZHiy/EtKXo1pq+fOcMEqSuaaDfcYgdHmLm0OIU12Ig==
=51xc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmRGFU4ACgkQDHTzWXnE
hr5m4w/9GzutylTH5aY+otFRNR6uKWGJZ9d90RLyLOE3vjE+7/Q/36EXPOjZctVt
VgfQD1giKIGD9ENcCfwbw6iwyVAjLvinBr3Hz4NleEu1TjdXPJvgo9OW/+FQKVi6
1vWH/mcnN6o89m3Mme7T2drFtwy3Y6/l5EY18yNyI7XeQVUMaDTr9Lvcriq0Sigc
CInYxilIxViKioYZQmHihXPnZ89nNQZweN2GtDu8O9Bw1Z1eEyn0kRzb3px2Zl6T
MpQEQasrPDdF3LFlVWs0AlKmLFbhqV9Pq/OPfowfAWT5RSXpeDvO95NaL3EPzFXy
AO6jWHR7/VpvWvj4iJ6R35TLgi/CyASxjJ8Cr9k61Sb1U2WthMEmtd1BKBtI5mTq
Us7yP2WJle3LXEqXyvDKDGsZf8kOQ4nyJx+3CJof5Tbnzy3hn+JUkTiUweSDQ14x
CHEz7TI8WY5G96+zcyBcee0MWa3V6IXH0cjuMMUiSHw1uir34LuyP+plaELp3eqv
MFf5WUJEuU9DmDlxRd2W+g6fmKWaEkY2ksWcbD7H3BZrBmnxkS4LIyfC9HJirGCC
4JF4+4k55F/UAzQOi/4hQxulPtQmHug2/9c29IqZerwxekYdMRkb75rIoVf0IfF4
uLexY0u3aO+IKZ7ygSL9MAwAyiJU6ulYigMLxWMjT7vU36CF5Z8=
=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
-----BEGIN PGP SIGNATURE-----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=V4wc
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Stop passing the 'selinux_state' pointers as function arguments
As discussed during the end of the last development cycle, passing a
selinux_state pointer through the SELinux code has a noticeable
impact on performance, and with the current code it is not strictly
necessary.
This simplifies things by referring directly to the single
selinux_state global variable which should help improve SELinux
performance.
- Uninline the unlikely portions of avc_has_perm_noaudit()
This change was also based on a discussion from the last development
cycle, and is heavily based on an initial proof of concept patch from
you. The core issue was that avc_has_perm_noaudit() was not able to
be inlined, as intended, due to its size. We solved this issue by
extracting the less frequently hit portions of avc_has_perm_noaudit()
into a separate function, reducing the size of avc_has_perm_noaudit()
to the point where the compiler began inlining the function. We also
took the opportunity to clean up some ugly RCU locking in the code
that became uglier with the change.
- Remove the runtime disable functionality
After several years of work by the userspace and distro folks, we are
finally in a place where we feel comfortable removing the runtime
disable functionality which we initially deprecated at the start of
2020.
There is plenty of information in the kernel's deprecation (now
removal) notice, but the main motivation was to be able to safely
mark the LSM hook structures as '__ro_after_init'.
LWN also wrote a good summary of the deprecation this morning which
offers a more detailed history:
https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03
- Remove the checkreqprot functionality
The original checkreqprot deprecation notice stated that the removal
would happen no sooner than June 2021, which means this falls hard
into the "better late than never" bucket.
The Kconfig and deprecation notice has more detail on this setting,
but the basic idea is that we want to ensure that the SELinux policy
allows for the memory protections actually applied by the kernel, and
not those requested by the process.
While we haven't found anyone running a supported distro that is
affected by this deprecation/removal, anyone who is affected would
only need to update their policy to reflect the reality of their
applications' mapping protections.
- Minor Makefile improvements
Some minor Makefile improvements to correct some dependency issues
likely only ever seen by SELinux developers. I expect we will have at
least one more tweak to the Makefile during the next merge window,
but it didn't quite make the cutoff this time around.
* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: ensure av_permissions.h is built when needed
selinux: fix Makefile dependencies of flask.h
selinux: stop returning node from avc_insert()
selinux: clean up dead code after removing runtime disable
selinux: update the file list in MAINTAINERS
selinux: remove the runtime disable functionality
selinux: remove the 'checkreqprot' functionality
selinux: stop passing selinux_state pointers and their offspring
selinux: uninline unlikely parts of avc_has_perm_noaudit()
Inject and Clear Poison commands are optionally supported by CXL
memdev devices and are intended for use in debug environments only.
Add debugfs attributes for user access.
Documentation/ABI/testing/debugfs-cxl describes the usage.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/0c9ea8e671b8e58465d18722788b60d325c675c7.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When a boolean 'true' is written to this attribute the memdev driver
retrieves the poison list from the device. The list consists of
addresses that are poisoned, or would result in poison if accessed,
and the source of the poison. This attribute is only visible for
devices supporting the capability. The retrieved errors are logged
as kernel events when cxl_poison event tracing is enabled.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/1081cfdc8a349dc754779642d584707e56db26ba.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This adds the general_profit KSM sysfs knob and the process profit metric
knobs to ksm_stat.
1) expose general_profit metric
The documentation mentions a general profit metric, however this
metric is not calculated. In addition the formula depends on the size
of internal structures, which makes it more difficult for an
administrator to make the calculation. Adding the metric for a better
user experience.
2) document general_profit sysfs knob
3) calculate ksm process profit metric
The ksm documentation mentions the process profit metric and how to
calculate it. This adds the calculation of the metric.
4) mm: expose ksm process profit metric in ksm_stat
This exposes the ksm process profit metric in /proc/<pid>/ksm_stat.
The documentation mentions the formula for the ksm process profit
metric, however it does not calculate it. In addition the formula
depends on the size of internal structures. So it makes sense to
expose it.
5) document new procfs ksm knobs
Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Userspace can't easily discover how much of a sleep cycle was spent in a
hardware sleep state without using kernel tracing and vendor specific sysfs
or debugfs files.
To make this information more discoverable, introduce 3 new sysfs files:
1) The time spent in a hw sleep state for last cycle.
2) The time spent in a hw sleep state since the kernel booted
3) The maximum time that the hardware can report for a sleep cycle.
All of these files will be present only if the system supports s2idle.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit adds sysfs file for BlueField boot fifo. The boot
fifo is usually used to push boot stream via USB or PCIe. Once
OS is up, it can be reused by applications to read data or
configuration from external host.
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/52b0b00dacbc4aad3169dd3667d79c85e334783b.1680657571.git.limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add sysfs knob for per wq Page Request Service disable. This knob
disables PRS support for the specific wq. When this bit is set,
it also overrides the wq's block on fault enabling.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-17-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Provide the pid of the application for the opened file. This allows the
monitor daemon to easily correlate which app opened the file and easily
kill the app by pid if that is desired action.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-16-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose cr_faults and cr_fault_failures counters to the user space. This
allows a user app to keep track of how many fault the application is
causing with the completion record (CR) and also the number of failures
of the CR writeback. Having a high number of cr_fault_failures is bad as
the app is submitting descriptors with the CR addresses that are bad. User
monitoring daemon may want to consider killing the application as it may be
malicious and attempting to flood the device event log.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-15-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for changing of the event log size. Event log is a
feature added to DSA 2.0 hardware to improve error reporting.
It supersedes the SWERROR register on DSA 1.0 hardware and hope
to prevent loss of reported errors.
The error log size determines how many error entries supported for
the device. It can be configured by the user via sysfs attribute.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
-----BEGIN PGP SIGNATURE-----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=xxs6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
MAINTAINERS: Add ROHM BU27034
iio: light: ROHM BU27034 Ambient Light Sensor
dt-bindings: iio: light: Support ROHM BU27034
MAINTAINERS: Add IIO gain-time-scale helpers
iio: light: Add gain-time-scale helpers
doc: Make sysfs-bus-iio doc more exact
iio: dac: set variable max5522_channels storage-class-specifier to static
dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
iio: addac: stx104: Migrate to the regmap API
iio: addac: stx104: Improve indentation in stx104_write_raw()
iio: addac: stx104: Use define rather than hardcoded limit for write val
iio: addac: stx104: Fix race condition when converting analog-to-digital
iio: addac: stx104: Fix race condition for stx104_write_raw()
dt-bindings: iio: st-sensors: Fix repeated text
staging: iio: resolver: ads1210: fix config mode
iio: adc: ti-ads1100: fix error code in probe()
iio: accel: add support for IIS328DQ variant
dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
...
A few IIC channel descriptions explained used units as:
data is in foo "that can be processed into an" [unit] value. The "can be
processed into" is quite broad statement as it does not really explain
what this processing means. This makes units pretty much useless.
After discussion with Jonathan, it seems the units for these channels
should also be well-defined as for all other channels. The processing
means the standard scale and offset application that is used throughout
the IIO. Let's make it more obvious by stating that the units are [unit]
after scale ane offset are applied.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/41eafb0caa510cddf650cf5ff940639a184f3005.1677331779.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On ATSM the PL1 limit is disabled at power up. The previous uapi assumed
that the PL1 limit is always enabled and therefore did not have a notion of
a disabled PL1 limit. This results in erroneous PL1 limit values when the
PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit
was previously shown as 0 which means a low PL1 limit whereas the limit
being disabled actually implies a high effective PL1 limit value.
To get round this problem, the PL1 limit uapi is expanded to include a
special value 0 to designate a disabled PL1 limit. A read value of 0 means
that the PL1 power limit is disabled, writing 0 disables the limit.
The link between this patch and the bugs mentioned below is as follows:
* Because on ATSM the PL1 power limit is disabled on power up and there
were no means to enable it, we previously implemented the means to
enable the limit when the PL1 hwmon entry (power1_max) was written to.
* Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value
from all hwmon sysfs (b) does a bunch of random writes and finally (c)
restores the orig value read. On ATSM since the orig value is 0, when
the IGT restores the 0 value, the PL1 limit is now enabled with a value
of 0.
* PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to
100 MHz. This causes GuC FW load and several IGT's to start timing out
and gives rise to these Intel CI bugs. After this patch, writing 0 would
disable the PL1 limit instead of enabling it, avoiding the freq drop
issue.
v2: Add explanation for bugs mentioned below (Rodrigo)
v3: Eliminate race during PL1 disable and verify (Tvrtko)
Change return to -ENODEV if verify fails (Tvrtko)
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com
Add a wireless_status sysfs attribute to USB devices to keep track of
whether a USB device that's comprised of a receiver dongle and an emitter
device over a, most of the time proprietary, wireless link has its emitter
connected or disconnected.
This will be used by user-space OS components to determine whether the
battery-powered part of the device is wirelessly connected or not,
allowing, for example:
- upower to hide the battery for devices where the device is turned off
but the receiver plugged in, rather than showing 0%, or other values
that could be confusing to users
- Pipewire to hide a headset from the list of possible inputs or outputs
or route audio appropriately if the headset is suddenly turned off, or
turned on
- libinput to determine whether a keyboard or mouse is present when its
receiver is plugged in.
This is done at the USB interface level as:
- the interface on which the wireless status is detected is sometimes
not the same as where it could be consumed (eg. the audio interface
on a headset dongle will still appear even if the headset is turned
off), and we cannot have synchronisation of status across subsystems.
- this behaviour is not specific to HID devices, even if the protocols
used to determine whether or not the remote device is connected can
be HID.
This is not an attribute that is meant to replace protocol specific
APIs, such as the ones available for WWAN, WLAN/Wi-Fi, or Bluetooth
or any other sort of networking, but solely for wireless devices with
an ad-hoc “lose it and your device is e-waste” receiver dongle.
The USB interface will only be exporting the wireless_status sysfs
attribute if it gets set through the API exported in the next commit.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-4-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add IAA (IAX) capability mask sysfs attribute to expose to applications.
The mask provides application knowledge of what capabilities this IAA
device supports. This mask is available for IAA 2.0 device or later.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce AMD CDX bus, which provides a mechanism for scanning
and probing CDX devices. These devices are memory mapped on
system bus for Application Processors(APUs).
CDX devices can be changed dynamically in the Fabric and CDX
bus interacts with CDX controller to rescan the bus and
rediscover the devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-2-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the Processing Unit and Camera Terminal descriptors defined in
the UVC Gadget we currently hard-code values into their bmControls
fields, which enumerates which controls the gadget is able to
support. This isn't appropriate since only the userspace companion
program to the kernel driver will know which controls are supported.
Make the configfs attributes that point to those fields read/write
so userspace can set them to appropriate values.
Document the new behaviour at the same time so the functionality is
clear.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230309105825.216745-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Array BIST test doesn't need an IFS test image to operate unlike
the SCAN test. Consequently current_batch and image_version
files are not applicable for Array BIST IFS device instance,
clarify this in the ABI doc.
Also given that multiple tests are supported, take the opportunity
to generalize descriptions wherever applicable.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-10-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We need the USB fixes here, and the USB gadget update for future
development patches to be based on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DbC is enabled the first port on the xHC host acts as a usb device.
xHC provides the descriptors automatically when the DbC device is
enumerated. Most of the values are hardcoded, but some fields such as
idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified.
Add sysfs entries that allow userspace to change these.
User can only change them before dbc is enabled, i.e. before writing
"enable" to dbc sysfs file as we don't want these values to change while
device is connected, or during enumeration.
Add documentation for these entries in
Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230317154715.535523-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the singleton group limitation has been removed, cleanup the code
in iommu_change_dev_def_domain() accordingly.
Documentation is also updated.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230322064956.263419-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
io_uring provides the only way user space can poll completions, and that
always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead
code, so remove it and everything supporting it.
Hybrid polling was effectively killed off with 9650b453a3, "block:
ignore RWF_HIPRI hint for sync dio", but still potentially reachable
through io_uring until d729cf9acb, "io_uring: don't sleep when
polling for I/O", but hybrid polling probably should not have been
reachable through that async interface from the beginning.
Fixes: 9650b453a3 ("block: ignore RWF_HIPRI hint for sync dio")
Fixes: d729cf9acb ("io_uring: don't sleep when polling for I/O")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The list of possible pm_profile values listed in sysfs-acpi-pmprofile
does not include the tablet one (8), so update it.
While at it, rewrite the description so it is more accurate and somewhat
easier to follow.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After working with the larger SELinux-based distros for several
years, we're finally at a place where we can disable the SELinux
runtime disable functionality. The existing kernel deprecation
notice explains the functionality and why we want to remove it:
The selinuxfs "disable" node allows SELinux to be disabled at
runtime prior to a policy being loaded into the kernel. If
disabled via this mechanism, SELinux will remain disabled until
the system is rebooted.
The preferred method of disabling SELinux is via the "selinux=0"
boot parameter, but the selinuxfs "disable" node was created to
make it easier for systems with primitive bootloaders that did not
allow for easy modification of the kernel command line.
Unfortunately, allowing for SELinux to be disabled at runtime makes
it difficult to secure the kernel's LSM hooks using the
"__ro_after_init" feature.
It is that last sentence, mentioning the '__ro_after_init' hardening,
which is the real motivation for this change, and if you look at the
diffstat you'll see that the impact of this patch reaches across all
the different LSMs, helping prevent tampering at the LSM hook level.
From a SELinux perspective, it is important to note that if you
continue to disable SELinux via "/etc/selinux/config" it may appear
that SELinux is disabled, but it is simply in an uninitialized state.
If you load a policy with `load_policy -i`, you will see SELinux
come alive just as if you had loaded the policy during early-boot.
It is also worth noting that the "/sys/fs/selinux/disable" file is
always writable now, regardless of the Kconfig settings, but writing
to the file has no effect on the system, other than to display an
error on the console if a non-zero/true value is written.
Finally, in the several years where we have been working on
deprecating this functionality, there has only been one instance of
someone mentioning any user visible breakage. In this particular
case it was an individual's kernel test system, and the workaround
documented in the deprecation notice ("selinux=0" on the kernel
command line) resolved the issue without problem.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
We originally promised that the SELinux 'checkreqprot' functionality
would be removed no sooner than June 2021, and now that it is March
2023 it seems like it is a good time to do the final removal. The
deprecation notice in the kernel provides plenty of detail on why
'checkreqprot' is not desirable, with the key point repeated below:
This was a compatibility mechanism for legacy userspace and
for the READ_IMPLIES_EXEC personality flag. However, if set to
1, it weakens security by allowing mappings to be made executable
without authorization by policy. The default value of checkreqprot
at boot was changed starting in Linux v4.4 to 0 (i.e. check the
actual protection), and Android and Linux distributions have been
explicitly writing a "0" to /sys/fs/selinux/checkreqprot during
initialization for some time.
Along with the official deprecation notice, we have been discussing
this on-list and directly with several of the larger SELinux-based
distros and everyone is happy to see this feature finally removed.
In an attempt to catch all of the smaller, and DIY, Linux systems
we have been writing a deprecation notice URL into the kernel log,
along with a growing ssleep() penalty, when admins enabled
checkreqprot at runtime or via the kernel command line. We have
yet to have anyone come to us and raise an objection to the
deprecation or planned removal.
It is worth noting that while this patch removes the checkreqprot
functionality, it leaves the user visible interfaces (kernel command
line and selinuxfs file) intact, just inert. This should help
prevent breakages with existing userspace tools that correctly, but
unnecessarily, disable checkreqprot at boot or runtime. Admins
that attempt to enable checkreqprot will be met with a removal
message in the kernel log.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
We need the mainline fixes in this branch for testing and other
subsystem changes to be based properly on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In high temperature condition, JEDEC spec requires memory controller to
double the refresh rate. This commit adds event_dimm_2x_refresh sysfs
to report that events for all memory channels.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230310083416.3670980-2-quan@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the file is written to and sync_state() hasn't been called for the
device yet, then call sync_state() for the device independent of the
state of its consumers.
This is useful for supplier devices that have one or more consumers that
don't have a driver but the consumers are in a state that don't use the
resources supplied by the supplier device.
This gives finer grained control than using the
fw_devlink.sync_state=timeout kernel commandline parameter.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20230304005355.746421-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds status interface for zynqmp-fpga. It's a read only interface
which allows the user to get the Programmable Logic(PL) configuration
status.
Usage:
To read the Programmable Logic(PL) configuration status.
cat /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230224120738.329416-3-nava.kishore.manne@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix DT binding for Richtek RT9467
- Fix a NULL pointer check in the power-supply core
- Document meaning of absent "present" property
-----BEGIN PGP SIGNATURE-----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=2K3C
-----END PGP SIGNATURE-----
Merge tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull more power supply updates from Sebastian Reichel:
- Fix DT binding for Richtek RT9467
- Fix a NULL pointer check in the power-supply core
- Document meaning of absent "present" property
* tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
dt-bindings: power: supply: Revise Richtek RT9467 compatible name
ABI: testing: sysfs-class-power: Document absence of "present" property
power: supply: fix null pointer check order in __power_supply_register
In this round, we've got a huge number of patches that improve code readability
along with minor bug fixes, while we've mainly fixed some critical issues in
recently-added per-block age-based extent_cache, atomic write support, and some
folio cases.
Enhancement:
- add sysfs nodes to set last_age_weight and manage discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fix:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to null io->bio
- fix some bugs in per-block age-based extent_cache:
a. wrong calculation of block age
b. update age extent in f2fs_do_zero_range()
c. update age extent correctly during truncation
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmP9M/cACgkQQBSofoJI
UNIX1Q//Yp+nDeY91H3IO6aMSHPqRoBBnVTr8ERtLUF0fuQbBkzcQE+t8cMSoYDM
88sxoC+F7UnovNr84VeuKlHN4hYyAXuxj8OZetXI3XX+yiO+auEPtljGA0BaGwqL
93lIg8nIQ2ing/oZ/4+h4dvpYCPrhKOQS6h1sHhIWlql6Wxwxq01uA47i0Ni6y/o
D23JPFaDQfumN8qy1bm5xfLRhTQmaE35n5NhcBJpUD/rGK92NPXv7RLKPgZc3tKN
tJmL+NXa3NNEx5e5TSP7JX+rhD7KlL5XlB/m8LbpPIx338I0pt0uzAc7nTIOlzM3
DI0q3HXe9U3+JBHi+rKxkIniiRDmvhPx3NzdgcsYg75EnwdrNazsRHulBUEAXB4v
ghHbx53OxA2uSnUVbkY4HXNYf7cYjrx5vbX0oqEx48btBCC8KGFIcHtI72tIBee3
xdCxoM3e2AWijkFBOCkThXNuNNbdifQzn2e7xR7W+o0L9hwdR5t7tHhHT+cqG9Ox
6UKWoZZUjYUAV/YQT5Qh6570GsGncM8gHAUMz7DVTIOB9wYkHtb0Q9tUmoQccwf5
46r84c4/jxUQHt8SkXBBl1aiqHmR7EF17YvM5AXIdG3DqqOy70NWkM48hMOyIy2G
eY/wTVJwpd6oDveQPtxaHn7Wo3jSPNUlidOfAYQ7Itm34VXY/zc=
=yXLl
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've got a huge number of patches that improve code
readability along with minor bug fixes, while we've mainly fixed some
critical issues in recently-added per-block age-based extent_cache,
atomic write support, and some folio cases.
Enhancements:
- add sysfs nodes to set last_age_weight and manage
discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fixes:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to NULL io->bio
- fix some bugs in per-block age-based extent_cache:
- wrong calculation of block age
- update age extent in f2fs_do_zero_range()
- update age extent correctly during truncation"
* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: drop unnecessary arg for f2fs_ioc_*()
f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
f2fs: synchronize atomic write aborts
f2fs: fix wrong segment count
f2fs: replace si->sbi w/ sbi in stat_show()
f2fs: export ipu policy in debugfs
f2fs: make kobj_type structures constant
f2fs: fix to do sanity check on extent cache correctly
f2fs: add missing description for ipu_policy node
f2fs: fix to set ipu policy
f2fs: fix typos in comments
f2fs: fix kernel crash due to null io->bio
f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
f2fs: add sysfs nodes to set last_age_weight
f2fs: fix f2fs_show_options to show nogc_merge mount option
f2fs: fix cgroup writeback accounting with fs-layer encryption
f2fs: fix wrong calculation of block age
f2fs: fix to update age extent in f2fs_do_zero_range()
f2fs: fix to update age extent correctly during truncation
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
...
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
- Support for configuring secure boot with user-defined keys on PowerVM LPARs.
- Simplify the replay of soft-masked IRQs by making it non-recursive.
- Add support for KCSAN on 64-bit Book3S.
- Improvements to the API & code which interacts with RTAS (pseries firmware).
- Change 32-bit powermac to assign PCI bus numbers per domain by default.
- Some improvements to the 32-bit BPF JIT.
- Various other small features and fixes.
Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe
Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict
Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers,
Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin,
Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy,
Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy.
-----BEGIN PGP SIGNATURE-----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=ECNb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
Document how the absence of the "present" property in the sysfs
power_supply class should be handled.
Link: https://gitlab.freedesktop.org/upower/upower/-/merge_requests/173
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Including:
- Consolidate iommu_map/unmap functions. There have been
blocking and atomic variants so far, but that was problematic
as this approach does not scale with required new variants
which just differ in the GFP flags used.
So Jason consolidated this back into single functions that
take a GFP parameter. This has the potential to cause
conflicts with other trees, as they introduce new call-sites
for the changed functions. I offered them to pull in the
branch containing these changes and resolve it, but I am not
sure everyone did that. The conflicts this caused with
upstream up to v6.2-rc8 are resolved in the final merge
commit.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
* Cater for three power domains on SM6375
* Document existing compatible strings for Qualcomm SoCs
* Tighten up clocks description for platform-specific compatible strings
- Enable Qualcomm workarounds for some additional platforms that need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=ZaZV
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
- Change MFD support status from Supported to Maintained
- New Drivers
- Add support for the Intel Platform Management Component Interface (PMCI)
- Remove Drivers
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
- New Device Support
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
- New Functionality
- Provide Reset support to Syscon
- Fix-ups
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved register_sys_off_handler() API
- Bug Fixes
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths
-----BEGIN PGP SIGNATURE-----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=f0fr
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
Removals:
- remove legacy dri1 drivers -
- i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements
-----BEGIN PGP SIGNATURE-----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=HQUi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY/OUGBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5baCAP0a4N8OiH5Sv9EQ5xAI8jbDwOeE/Aen
izx6RXiBncaY9QEA7WrXUS3y/8zO3dWSL9feviGDuajTn0bJpmWXkCeh8wM=
=pwAo
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"One doc and one code cleanup, and two bug fixes"
* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Introduce MMAP_CHECK_REQPROT hook
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
evm: call dump_security_xattr() in all cases to remove code duplication
ima: fix ima_delete_rules() kernel-doc warning
ima: return IMA digest value only when IMA_COLLECTED flag is set
ima: fix error handling logic when file measurement failed
- New drivers
* Infineon TDA38640 Voltage Regulator
* NXP MC34VR500 PMIC
* GXP fan controller
* MPQ7932 Power Management IC
- New chip or board support added to existing drivers
* it87: IT87952E; also other cleanup/improvements
* intel-m10-bmc-hwmon: N6000
* pmbus/max16601: MAX16600
* aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3,
Aquacomputer Aquaero
* nct6775: Support for B650/B660/X670 ASUS boards
* oxp-sensors: AYANEO AIR and AIR Pro
- Other notable changes
* Various kernel documentation fixes
* Various devicetree bindings fixes
* Explicitly deprecated [devm_]hwmon_device_register_with_groups
* ftsteutates: Support for fanX_fault and other cleanup
* ltc2945: Support for setting shunt resistor and other cleanup/fixes
* coretemp: Avoid RDMSR interrupts to isolated CPUs,
and simplify platform device handling
- Vaious other minoc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=yXoY
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon TDA38640 Voltage Regulator
- NXP MC34VR500 PMIC
- GXP fan controller
- MPQ7932 Power Management IC
New chip or board support added to existing drivers:
- it87: IT87952E; also other cleanup/improvements
- intel-m10-bmc-hwmon: N6000
- pmbus/max16601: MAX16600
- aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer
Poweradjust 3, Aquacomputer Aquaero
- nct6775: Support for B650/B660/X670 ASUS boards
- oxp-sensors: AYANEO AIR and AIR Pro
Other notable changes:
- Various kernel documentation fixes
- Various devicetree bindings fixes
- Explicitly deprecated [devm_]hwmon_device_register_with_groups
- ftsteutates: Support for fanX_fault and other cleanup
- ltc2945: Support for setting shunt resistor and other cleanup/fixes
- coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify
platform device handling
... and various other minor cleanups and fixes"
* tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits)
hwmon: Deprecate [devm_]hwmon_device_register_with_groups
hwmon: (mlxreg-fan) Return zero speed for broken fan
hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
hwmon: (iio_hwmon) use dev_err_probe
hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
Docs/hwmon/index: Add missing SPDX License Identifier
hwmon: (it87) Updated documentation for recent updates to it87
hwmon: (it87) Add new chipset IT87952E
hwmon: (it87) Allow multiple chip IDs for force_id
hwmon: (it87) Add chip_id in some info message
hwmon: (it87) List full chip model name
hwmon: (it87) Disable configuration exit for certain chips
hwmon: (it87) Allow disabling exiting of configuration mode
Documentation: hwmon: correct spelling
hwmon: (pmbus/max16601) Add support for MAX16600
hwmon: (ltc2945) Allow setting shunt resistor
hwmon: (ltc2945) Handle error case in ltc2945_value_store
hwmon: (ltc2945) Add devicetree match table
...
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmPzAiwACgkQxycdCkmx
i6et8xAAoO3w5MZFGXMzWsYhfSZFdceXBEQfDR7JOCdHxpMIQhw0FLlb0uttFk6m
SeWrdP9wiifBDoCmw7qffFJml8ZftPL/XeXjob2d9v7jKbPyw3lDSIdsNfN/5EEL
oIc9915zwrgawvahPAa+PQ4Ue03qRjUyOcV42dpd1W3NYhzDVHoK5OUU+mEFYDvx
Sgw/YUugKf0VXkVDFzG5049+CPcheyRZqclAo9jyl2eZiXujgUyV33nxRCtqIA+t
7jlHKwi+6QzFHY0CX5BvShR8xyEuH5MLoU3H/jYGXnRb3nEpRYAEO4VZchIHqF0F
Y6pKIKc6Q8OyIVY8RsjQY3hioCqYnQFZ5Xtc1zGtOYEitVLbkmItMG0mVn0XOfyt
gJDi6gkEw5uPUbEQdI4R1xEgJ8eCckMsOJ+uRxqTm+uLqNDxPbsB9bohKniMogXV
lDlVXjU23AA9VeKtqU8FvWjfgqsN47X4aoq1j4/4aI7X9F7P9FOP21TZloP7+ssj
PFrzNaRXUrMEsvyS1wqPegIh987lj6WkH4hyU0wjzaIq4IQELidHsSXFS12iWIPH
kTEoC/trAVoYSr0zXKWUCs4h/x0FztVNbjs4KiDP2FLXX1RzeVZ0WlaXZhryHr+n
1+8yCuS6tVofAbSX0wNkZdf0x5+3CIBw4kqSIvjKDPYYEfIDaT0=
=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
Highlights:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add include/linux/platform_data/x86 to MAINTAINERS:
- Add include/linux/platform_data/x86 to MAINTAINERS
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Fix header inclusion in linux/platform_data/x86/soc.h:
- Fix header inclusion in linux/platform_data/x86/soc.h
HID:
- surface-hid: Use target-ID enum instead of hard-coding values
MAINTAINERS:
- dell-wmi-sysman: drop Divya Bharathi
- Add entry for TPMI driver
Merge tag 'ib-leds-led_get-v6.3' into HEAD:
- Merge tag 'ib-leds-led_get-v6.3' into HEAD
acerhdf:
- Drop empty platform remove function
apple_gmux:
- Drop no longer used ACPI_VIDEO Kconfig dependency
dell-ddv:
- Prefer asynchronous probing
- Add hwmon support
- Add "force" module param
- Replace EIO with ENOMSG
- Return error if buffer is empty
- Add support for interface version 3
dell-smo8800:
- Use min_t() for comparison and assignment
dell-wmi-sysman:
- Make kobj_type structure constant
hp-wmi:
- Ignore Win-Lock key events
int1092:
- Switch to use acpi_evaluate_dsm_typed()
int3472/discrete:
- add LEDS_CLASS dependency
- Drop unnecessary obj->type == string check
- Get the polarity from the _DSM entry
- Move GPIO request to skl_int3472_register_clock()
- Create a LED class device for the privacy LED
- Refactor GPIO to sensor mapping
intel:
- punit_ipc: Drop empty platform remove function
- oaktrail: Drop empty platform remove function
intel/pmc:
- Switch to use acpi_evaluate_dsm_typed()
leds:
- led-class: Add generic [devm_]led_get()
- led-class: Add __devm_led_get() helper
- led-class: Add led_module_get() helper
- led-class: Add missing put_device() to led_put()
media:
- v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present
nvidia-wmi-ec-backlight:
- Add force module parameter
platform:
- mellanox: mlx-platform: Move bus shift assignment out of the loop
- mellanox: mlx-platform: Add mux selection register to regmap
- mellanox: Extend all systems with I2C notification callback
- mellanox: Split logic in init and exit flow
- mellanox: Split initialization procedure
- mellanox: Introduce support of new Nvidia L1 switch
- mellanox: Introduce support for next-generation 800GB/s switch
- mellanox: Cosmetic changes - rename to more common name
- mellanox: Change "reset_pwr_converter_fail" attribute
- mellanox: Introduce support for rack manager switch
platform/mellanox:
- mlxreg-hotplug: Allow more flexible hotplug events configuration
platform/surface:
- Switch to use acpi_evaluate_dsm_typed()
- aggregator: Rename top-level request functions to avoid ambiguities
- aggregator_registry: Fix target-ID of base-hub
- aggregator: Enforce use of target-ID enum in device ID macros
- dtx: Use target-ID enum instead of hard-coding values
- aggregator_tabletsw: Use target-ID enum instead of hard-coding values
- aggregator_hub: Use target-ID enum instead of hard-coding values
- aggregator: Add target and source IDs to command trace events
- aggregator: Improve documentation and handling of message target and source IDs
platform/x86/amd:
- pmc: Add line break for readability
- pmc: differentiate STB/SMU messaging prints
- pmc: Write dummy postcode into the STB DRAM
- pmc: Add num_samples message id support to STB
platform/x86/amd/pmf:
- Add depends on CONFIG_POWER_SUPPLY
platform/x86/intel:
- Intel TPMI enumeration driver
platform/x86/intel/tpmi:
- ADD tpmi external interface for tpmi feature drivers
- Process CPU package mapping
platform/x86/intel/vsec:
- Use mutex for ida_alloc() and ida_free()
- Support private data
- Enhance and Export intel_vsec_add_aux()
- Add TPMI ID
platform_data/mlxreg:
- Add field with mapped resource address
think-lmi:
- Make kobj_type structure constant
- Use min_t() for comparison and assignment
tools/power/x86/intel-speed-select:
- v1.14 release
- Adjust uncore max/min frequency
- Add Emerald Rapid quirk
- Fix display of uncore min frequency
- turbo-freq auto mode with SMT off
- cpufreq reads on offline CPUs
- Use null-terminated string
- Remove duplicate dup()
- Handle open() failure case
- Remove unused non_block flag
- Remove wrong check in set_isst_id()
x86/platform/uv:
- Make kobj_type structure constant
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPzRpgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYPwf+I6PP0XBg8MrivLc2DHklVojUU0aX
/M0LbCP8gxCDdyisV8swC3e848riaTchYlUGASPZu0ieas1U7KsDvghkiittNvlI
U+0h7TbkOQNymM8oE0oauflH4W5KwCXGrLsJWVkGk0lhJd6WmjXkjWLkruaXazLd
kc5fq0QyzRVzhhCtocQ7qhIgXSZyKYx433VqbDR7/SUi5F2wkC9JbGY02maKWaK3
4lQaoyMKLjGlDr9YVv+UHTwLoXwP0mW/fjlsZ3Xz5lz6WfihQzPuOrl/10mRj0Ez
eP9dlF1Dipee4BYS2FM5dtk5xPpqdVqRlQUX2qKzyDNTSx5wdtJnv8j/cg==
=VoXq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY/GzaAAKCRCAXGG7T9hj
vhgtAP96ax9EV49/kCST52z9yGfGUA+giq/9Jm6bwHlP3PZXVAD/Wfhfp1HbxzFp
CqXG7veXU+uGVP3lbpbYKNPV9DIOdgQ=
=K+0Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- help deprecate the /proc/xen files by making the related information
available via sysfs
- mark the Xen variants of play_dead "noreturn"
- support a shared Xen platform interrupt
- several small cleanups and fixes
* tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: sysfs: make kobj_type structure constant
x86/Xen: drop leftover VM-assist uses
xen: Replace one-element array with flexible-array member
xen/grant-dma-iommu: Implement a dummy probe_device() callback
xen/pvcalls-back: fix permanently masked event channel
xen: Allow platform PCI interrupt to be shared
x86/xen/time: prefer tsc as clocksource when it is invariant
x86/xen: mark xen_pv_play_dead() as __noreturn
x86/xen: don't let xen_pv_play_dead() return
drivers/xen/hypervisor: Expose Xen SIF flags to userspace
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
* Background Color Support
* ASCII Line Character Support
* VT100 Support
* Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest memory
with a specific storage key.
- Add support for user space events counting to CPUMF.
- Cleanup the vfio/ccw code, which also allows now to properly support 2K
Format-2 IDALs.
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address translation
enabled. This in turn allows to get rid of code with special handling in
the kernel, which has to distinguish if DAT is on or off.
- Replace kretprobe with rethook.
- Various improvements to vfio/ap queue resets:
* Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
* Check TAPQ response codes when verifying successful completion of ZAPQ.
* Fix erroneous handling of some error response codes.
* Increase the maximum amount of time to wait for successful completion
of ZAPQ.
- Rework system call wrappers to get rid of alias functions, which were
only left on s390.
- Cleanup diag288_wdt watchdog driver. It has been agreed on with Guenter
Roeck that this goes upstream via the s390 tree.
- Add missing loadparm parameter handling for list-directed ECKD ipl/reipl.
- Various improvements to memory detection code.
- Remove arch_cpu_idle_time() since the current implementation is broken,
and allows user space observable accounted idle times which can
temporarily decrease.
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO to
RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all CPUs
are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all CPU
synchronization, like it is required with IPTE, should be beneficial.
- Fix KFENCE page fault reporting.
- Smaller cleanups and improvement all over the place.
-----BEGIN PGP SIGNATURE-----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=MW9x
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-2-6189311103a9@weissschuh.net
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
The file is called "fw_version" instead of "firmware_version" as
"firmware_version" is already used as custom attribute by single drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-1-6189311103a9@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
28th bit of fixed supply sink PDO represents higher capability.
When this bit is set, the sink device needs more than vsafe5V
(eg: 12 V) to provide full functionality. This patch adds
this higher capability sysfs interface for sink PDO.
28th bit of fixed supply source PDO represents usb_suspend_supported
attribute. This usb_suspend_supported sysfs is already exposed for
source PDOs. This patch adds 'source-capabilities' in
usb_suspend_supported sysfs documentation for additional clarity.
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230214114543.205103-2-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
-----BEGIN PGP SIGNATURE-----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=EWZ7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPqVYUACgkQmmx57+YA
GNnD1xAApXNA9N+BLLjfOXErNlKWTQXHThSQIvHxx7xubIy3Nm/soGCJFcp45hYJ
IW74MuOy5N3ngFe4HzGyUiHW/9E9BLZGh0ZzHUO/dIhG7io3zAC7tDw6bbwu67Wz
NhWBurgsy5BL7jjX/bBDKZuthyEI6IlD2TYLeFqrD63ZoryviyvD3IKS4JAo8zg3
Fz7z8Cr9v02cur6QJum95iNxogncX8L1/WQwRfHXsMV4MgteArTuNTh8zAXBPAlV
T7ENWe/2U6GCvoU295hl5NLHwARSm1bsSNYVCJR5cvSBXqd8U06WDFLBttUdRg8J
32KCWDLZ/J8IF69DvOWRfh+cmJmlM14o2uNLSnFbV2PyNh4LORsWCbx2J4zX147T
nocFySuOxP9g4+7h0zv5FFm+uAS7RPIPLKCdCsYR3RbZl5cbZmnvJzQIgLKaVa+e
fprcDT6X8HhODDtj49kEtK7kRe3dFz0MwiHf9wxyx7rm1eIlqGI3reHaU4fcaml2
PqgtuShMGx3uSnpHsi2j/sXuCEmKpNSwOBPU1INNgKm2FmMFy4OYsPbe7s1vdTpi
irJ3CC/3Uk9r4CEoJe3G9TURFQyEpNISjdCEa21tGD0miMrdsB79JMU/nJkiLpg9
7l8EDMU33HYKsAqqezocNqzreV2s0YjFPs7Vts5aIh+aecS/Kzk=
=B0bJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Add description for new attributes added for rack manager switch and
NG800 family systems.
Attributes related to power converter board:
- reset_pwr_converter_fail;
- pwr_converter_prog_en;
Attributes related to External Root of Trust (EROT) devices recovery:
- erot1_ap_reset;
- erot2_ap_reset;
- erot1_recovery;
- erot2_recovery;
- erot1_reset;
- erot2_reset;
- erot1_wp;
- erot2_wp;
- spi_chnl_select;
Attributes related to clock board failures and recovery:
- clk_brd1_boot_fail;
- clk_brd2_boot_fail;
- clk_brd_fail;
- clk_brd_prog_en;
Attributes related to power failures:
- reset_ac_ok_fail;
- asic_pg_fail;
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-14-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
/proc/xen is a legacy pseudo filesystem which predates Xen support
getting merged into Linux. It has largely been replaced with more
normal locations for data (/sys/hypervisor/ for info, /dev/xen/ for
user devices). We want to compile xenfs support out of the dom0 kernel.
There is one item which only exists in /proc/xen, namely
/proc/xen/capabilities with "control_d" being the signal of "you're in
the control domain". This ultimately comes from the SIF flags provided
at VM start.
This patch exposes all SIF flags in /sys/hypervisor/start_flags/ as
boolean files, one for each bit, returning '1' if set, '0' otherwise.
Two known flags, 'privileged' and 'initdomain', are explicitly named,
and all remaining flags can be accessed via generically named files,
as suggested by Andrew Cooper.
Signed-off-by: Per Bilse <per.bilse@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230103130213.2129753-1-per.bilse@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
Expand the region creation infrastructure to enable 'ram'
(volatile-memory) regions. The internals of create_pmem_region_store()
and create_pmem_region_show() are factored out into helpers
__create_region() and __create_region_show() for the 'ram' case to
reuse.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601995775.1924368.352616146815830591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Shipping versions of the cxl-cli utility expect all regions to have a
'uuid' attribute. In preparation for 'ram' regions, update the 'uuid'
attribute to return an empty string which satisfies the current
expectations of 'cxl list -R'. Otherwise, 'cxl list -R' fails in the
presence of regions with the 'uuid' attribute missing. Force the
attribute to be read-only as there is no facility or expectation for a
'ram' region to recall its uuid from one boot to the next.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167601994558.1924368.12612811533724694444.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for a new region type, "ram" regions, add a mode
attribute to clarify the mode of the decoders that can be added to a
region. Share the internals of mode_show() (for decoders) with the
region case.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993930.1924368.4305018565539515665.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to Linus deciding that the kernel that following v5.19 would be
v6.0, the CXL ABI documentation already referenced v5.20. In preparation
for updating these entries update the kernel version to v6.0.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993360.1924368.14122892663883462813.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>