[ Upstream commit c4040212bc ]
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73534617df ]
The btf__load_from_kernel_by_id() only takes one arg, not two.
Committer notes:
I tested it just with an older libbpf, one where
btf__load_from_kernel_by_id() wasn't introduced yet.
A test with a newer dynamic libbpf would fail because the
btf__load_from_kernel_by_id() is there, but takes just one arg.
Fixes: 0ae065a5d2 ("perf build: Fix check for btf__load_from_kernel_by_id() in libbpf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e4fd16b38 ]
kernel test robot reports a build error used with clang compiler and
mips-randconfig [1]:
ld.lld: error: undefined symbol: pci_remap_iospace
we can see the following configs in the mips-randconfig file:
CONFIG_RALINK=y
CONFIG_SOC_MT7620=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PCI=y
CONFIG_RALINK is set, so pci_remap_iospace is defined in the related
arch/mips/include/asm/mach-ralink/spaces.h header file:
#define pci_remap_iospace pci_remap_iospace
CONFIG_PCI is set, so pci_remap_iospace() in drivers/pci/pci.c is not
built due to pci_remap_iospace is defined under CONFIG_RALINK.
#ifndef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, ...)
$ objdump -d drivers/pci/pci.o | grep pci_remap_iospace
00004cc8 <devm_pci_remap_iospace>:
4d18: 10400008 beqz v0,4d3c <devm_pci_remap_iospace+0x74>
4d2c: 1040000c beqz v0,4d60 <devm_pci_remap_iospace+0x98>
4d70: 1000fff3 b 4d40 <devm_pci_remap_iospace+0x78>
In addition, CONFIG_PCI_DRIVERS_GENERIC is not set, so pci_remap_iospace()
in arch/mips/pci/pci-generic.c is not built too.
#ifdef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, ...)
For the above reasons, undefined reference pci_remap_iospace() looks like
reasonable.
Here are simple steps to reproduce used with gcc and defconfig:
cd mips.git
make vocore2_defconfig # set RALINK, SOC_MT7620, PCI_DRIVERS_LEGACY
make menuconfig # set PCI
make
there exists the following build error:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
drivers/pci/pci.o: In function `devm_pci_remap_iospace':
pci.c:(.text+0x4d24): undefined reference to `pci_remap_iospace'
Makefile:1158: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC can fix the build
error, with this patch, no build error remains. This patch is similar with
commit e538e86498 ("MIPS: asm: pci: define arch-specific
'pci_remap_iospace()' dependent on 'CONFIG_PCI_DRIVERS_GENERIC'").
[1] https://lore.kernel.org/lkml/202205251247.nQ5cxSV6-lkp@intel.com/
Fixes: 09d97da660 ("MIPS: Only define pci_remap_iospace() for Ralink")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7681beba9 ]
This was broken by the original refactoring (as the XIP definitions
depend on <asm/pgtable.h>) and then more broken by the merge (as I
accidentally took the old version). This fixes both breakages, while
also pulling this out of <asm/asm.h> to avoid polluting most assembly
files with the XIP fixups.
Fixes: bee7fbc385 ("RISC-V CPU Idle Support")
Fixes: 63b13e64a8 ("RISC-V: Add arch functions for non-retentive suspend entry/exit")
Link: https://lore.kernel.org/r/20220420184056.7886-4-palmer@rivosinc.com
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e35c2d8e22 ]
The direct trampoline and graph coexistence test sets global_ops to
trace only 'trace_selftest_dynamic_test_func', but does not reset it
after the test is completed, resulting in the function filter being set
already after the system starts. Although it can be reset through the
tracefs interface, it is more or less confusing to the user, and we
should reset it to trace all functions after the trampoline/graph test
completes.
Link: https://lkml.kernel.org/r/20220427034119.24668-1-lihuafei1@huawei.com
Link: https://lore.kernel.org/all/20220418073958.104029-1-lihuafei1@huawei.com/
Fixes: 130c080658 ("tracing: Add trampoline/graph selftest")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fe2ec59db ]
We have to take care of ID_P_PM_BLOCKED when bailing out during probe.
Fixes: 7ee24eb508 ("i2c: rcar: disable PM in multi-master mode")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5222d408d ]
On some platforms in rare cases (1 to 100,000 transactions),
the i2c gets a spurious interrupt which means that we enter an interrupt
but in the interrupt handler we don't find any status bit that points to
the reason we got this interrupt.
This may be a case of a rare HW issue or signal integrity issue that is
still under investigation.
In order to overcome this we are doing the following:
1. Disable incoming interrupts in master mode only when slave mode is not
enabled.
2. Clear end of busy (EOB) after every interrupt.
3. Clear other status bits (just in case since we found them cleared)
4. Return correct status during the interrupt that will finish the
transaction.
On next xmit transaction if the bus is still busy the master will issue a
recovery process before issuing the new transaction.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea9f8426d1 ]
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always
incorrect, but simply didn't cause a visible error on the 32-bit machine.
On the 64-bit machine, the kernel message reports that ESR value is
0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that
it's the alignment fault.
SMBnCTL3's address is 0xE.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42bb5aa043 ]
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738e ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
Cc: "D. Ziegfeld" <dzigg@posteo.de>
Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da3b8ddb46 ]
The parameter to pass back to the handler function when irq has been
requested is a struct stm32_mdma_device pointer, not a struct
stm32_mdma_chan pointer.
Even if chan is reinit later in the function, remove this wrong
initialization.
Fixes: a4ffb13c89 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-3-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6a2d92e4 ]
GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.
Fixes: a4ffb13c89 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b23789a59f ]
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak.
Fixes: d10715be03 ("video: ARM CLCD: Add DT support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c4a5c75a6 ]
Pass updated i_size in fscache_unuse_cookie() when called
from nfs_fscache_release_file(), which ensures the size of
an fscache object gets written to the cache storage. Failing
to do so results in unnessary reads from the NFS server, even
when the data is cached, due to a cachefiles object coherency
check failing with a trace similar to the following:
cachefiles_coherency: o=0000000e BAD osiz B=afbb3 c=0
This problem can be reproduced as follows:
#!/bin/bash
v=4.2; NFS_SERVER=127.0.0.1
set -e; trap cleanup EXIT; rc=1
function cleanup {
umount /mnt/nfs > /dev/null 2>&1
RC_STR="TEST PASS"
[ $rc -eq 1 ] && RC_STR="TEST FAIL"
echo "$RC_STR on $(uname -r) with NFSv$v and server $NFS_SERVER"
}
mount -o vers=$v,fsc $NFS_SERVER:/export /mnt/nfs
rm -f /mnt/nfs/file1.bin > /dev/null 2>&1
dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 > /dev/null 2>&1
echo 3 > /proc/sys/vm/drop_caches
echo Read file 1st time from NFS server into fscache
dd if=/mnt/nfs/file1.bin of=/dev/null > /dev/null 2>&1
umount /mnt/nfs && mount -o vers=$v,fsc $NFS_SERVER:/export /mnt/nfs
echo 3 > /proc/sys/vm/drop_caches
echo Read file 2nd time from fscache
dd if=/mnt/nfs/file1.bin of=/dev/null > /dev/null 2>&1
echo Check mountstats for NFS read
grep -q "READ: 0" /proc/self/mountstats # (1st number) == 0
[ $? -eq 0 ] && rc=0
Fixes: a6b5a28eb5 "nfs: Convert to new fscache volume/cookie API"
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6fd3511c3 ]
When we handle an error by redirtying the page, we're not corrupting the
mapping, so we don't want the error to be recorded in the mapping.
If the caller has specified a sync_mode of WB_SYNC_NONE, we can just
return AOP_WRITEPAGE_ACTIVATE. However if we're dealing with
WB_SYNC_ALL, we need to ensure that retries happen when the errors are
non-fatal.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 8fc75bed96 ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3764a17e31 ]
Commit 587f03deb6 caused pnfs_update_layout() to stop returning ENOMEM
when the memory allocation fails, and hence causes it to fall back to
trying to do I/O through the MDS. There is no guarantee that this will
fare any better. If we're failing the pNFS layout allocation, then we
should just redirty the page and retry later.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 587f03deb6 ("pnfs: refactor send_layoutget")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e483b77c ]
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d95b26650e ]
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6005436f6 ]
Any errors reported by the write() system call need to be cleared from
the file descriptor's error tracking. The current call to nfs_wb_all()
causes the error to be reported, but since it doesn't call
file_check_and_advance_wb_err(), we can end up reporting the same error
a second time when the application calls fsync().
Note that since Linux 4.13, the rule is that EIO may be reported for
write(), but it must be reported by a subsequent fsync(), so let's just
drop reporting it in write.
The check for nfs_ctx_key_to_expire() is just a duplicate to the one
already in nfs_write_end(), so let's drop that too.
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: ce368536dd ("nfs: nfs_file_write() should check for writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9641d9bc9b ]
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes: 2197e9b06c ("NFS: Fix up fsync() when the server rebooted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cea9ba7239 ]
If the attempt to flush data was interrupted due to a local signal, then
just requeue the writes back for I/O.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6977262c2e ]
Clang warns:
drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (dev->use_dma) {
^~~~~~~~~~~~
drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here
i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret);
^~~~~~~
Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op
when the first argument is NULL, which will work for the !dev->use_dma
case.
Fixes: 03fbb903c8 ("i2c: at91: use dma safe buffers")
Link: https://github.com/ClangBuiltLinux/linux/issues/1629
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abae018a03 ]
Calling hwmon_device_register_with_info() with NULL dev and/or chip
information parameters is an ABI abuse and not a real conversion to
the new API. Also, the code creates sysfs attributes _after_ creating
the hwmon device, which is racy and unsupported to start with. On top
of that, the removal code tries to remove the name attribute which is
owned by the hwmon core.
Use hwmon_device_register_with_groups() to register the hwmon device
instead.
In the future, the hwmon subsystem will reject calls to
hwmon_device_register_with_info with NULL dev or chip/info parameters.
Without this patch, the hwmon device will fail to register.
Fixes: f59dc51191 ("MIPS: Loongson: Fix boot warning about hwmon_device_register()")
Cc: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbd23144f7 ]
We currently call arm64_mm_context_put() without holding a reference to
the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to
ensure the mm only gets freed after we unpinned the ASID.
Fixes: 32784a9562 ("iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20220426130444.300556-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f126fbadce ]
We register the platform device when driver inits. However, we do not
unregister it when driver exits.
To resolve this, we declare the platform data to be a global static
variable and rename it to be "cpufreq_pdev". With this global variable,
we can do platform_device_unregister() when driver exits.
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
[ Viresh: Commit log and Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7070187c8 ]
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03fbb903c8 ]
The supplied buffer might be on the stack and we get the following error
message:
[ 3.312058] at91_i2c e0070600.i2c: rejecting DMA map of vmalloc memory
Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if
necessary.
Fixes: 60937b2cdb ("i2c: at91: add dma support")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e5a3f2e63 ]
Add a mutex to protect the data in the structure mtk_iommu_data,
like ->"m4u_group" ->"m4u_dom". For the internal data, we should
protect it in ourselves driver. Add a mutex for this.
This could be a fix for the multi-groups support.
Fixes: c3045f3924 ("iommu/mediatek: Support for multi domains")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-8-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee55f75e4b ]
Lack the list_del in the mtk_iommu_remove, and remove
bus_set_iommu(*, NULL) since there may be several iommu HWs.
we can not bus_set_iommu null when one iommu driver unbind.
This could be a fix for mt2712 which support 2 M4U HW and list them.
Fixes: 7c3a2ec028 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 645b87c190 ]
In the commit 4f956c97d2 ("iommu/mediatek: Move domain_finalise into
attach_device"), I overlooked the sharing pgtable case.
After that commit, the "data" in the mtk_iommu_domain_finalise always is
the data of the current IOMMU HW. Fix this for the sharing pgtable case.
Only affect mt2712 which is the only SoC that share pgtable currently.
Fixes: 4f956c97d2 ("iommu/mediatek: Move domain_finalise into attach_device")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5edde870d3 ]
Smatch static checker warns:
drivers/iommu/amd/iommu_v2.c:133 free_device_state()
warn: sleeping in atomic context
Fixes by storing the list of struct device_state in a temporary
list, and then free the memory after releasing the spinlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 9f968fc70d ("iommu/amd: Improve amd_iommu_v2_exit()")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220314024321.37411-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121660bba6 ]
Previously the AMD IOMMU would only enable SWIOTLB in certain
circumstances:
* IOMMU in passthrough mode
* SME enabled
This logic however doesn't work when an untrusted device is plugged in
that doesn't do page aligned DMA transactions. The expectation is
that a bounce buffer is used for those transactions.
This fails like this:
swiotlb buffer is full (sz: 4096 bytes), total 0 (slots), used 0 (slots)
That happens because the bounce buffers have been allocated, followed by
freed during startup but the bounce buffering code expects that all IOMMUs
have left it enabled.
Remove the criteria to set up bounce buffers on AMD systems to ensure
they're always available for supporting untrusted devices.
Fixes: 82612d66d5 ("iommu: Allow the dma-iommu api to use bounce buffers")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220404204723.9767-2-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aaf51dd39 ]
The list iterator variable will be a bogus pointer if no break was hit.
Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined
value making it unsafe to use that in the comparision to determine if the
specific element was found.
Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that
by chance (or intention of an attacker) it matches the value of 'page'
even though the correct element was not found.
This is fixed by using a separate list iterator variable for the loop
and only setting the original variable if a suitable element was found.
Then determing if the element was found is simply checking if the
variable is set.
Fixes: 8c242db9b8 ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12662d1946 ]
As Wenqing reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215765
It will cause a kernel panic with steps:
- mkdir mnt
- mount tmp40.img mnt
- ls mnt
folio_mark_dirty+0x33/0x50
f2fs_add_regular_entry+0x541/0xad0 [f2fs]
f2fs_add_dentry+0x6c/0xb0 [f2fs]
f2fs_do_add_link+0x182/0x230 [f2fs]
__recover_dot_dentries+0x2d6/0x470 [f2fs]
f2fs_lookup+0x5af/0x6a0 [f2fs]
__lookup_slow+0xac/0x200
lookup_slow+0x45/0x70
walk_component+0x16c/0x250
path_lookupat+0x8b/0x1f0
filename_lookup+0xef/0x250
user_path_at_empty+0x46/0x70
vfs_statx+0x98/0x190
__do_sys_newlstat+0x41/0x90
__x64_sys_newlstat+0x1a/0x30
do_syscall_64+0x37/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is for special file: e.g. character, block, fifo or
socket file, f2fs doesn't assign address space operations pointer array
for mapping->a_ops field, so, in a fuzzed image, if inline_dots flag was
tagged in special file, during lookup(), when f2fs runs into
__recover_dot_dentries(), it will cause NULL pointer access once
f2fs_add_regular_entry() calls a_ops->set_dirty_page().
Fixes: 510022a858 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f76955ab1 ]
The commit 26623eea0d attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.
Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.
Fixes: 26623eea0d ("Input: stmfts - fix reference leak in stmfts_input_open")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 619f51da09 ]
The timer is disarmed when switching between TSC deadline and other modes;
however, the pending timer is still in-flight, so let's accurately remove
any traces of the previous mode.
Fixes: 4427593258 ("KVM: x86: thoroughly disarm LAPIC timer around TSC deadline switch")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05c03dfd09 ]
If there is a failure during probe of hfi1 before the sdma_map_lock is
initialized, the call to hfi1_free_devdata() will attempt to use a lock
that has not been initialized. If the locking correctness validator is on
then an INFO message and stack trace resembling the following may be seen:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Call Trace:
register_lock_class+0x11b/0x880
__lock_acquire+0xf3/0x7930
lock_acquire+0xff/0x2d0
_raw_spin_lock_irq+0x46/0x60
sdma_clean+0x42a/0x660 [hfi1]
hfi1_free_devdata+0x3a7/0x420 [hfi1]
init_one+0x867/0x11a0 [hfi1]
pci_device_probe+0x40e/0x8d0
The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map
memory, and sdma_map is not allocated/initialized until after
sdma_map_lock has been initialized. This code only needs to be run if
sdma_map is not NULL, and so checking for that condition will avoid trying
to use the lock before it is initialized.
Fixes: 473291b3ea ("IB/hfi1: Fix for early release of sdma context")
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisnetworks.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f60951ff4 ]
The commit in the Fixes tag has shuffled some code.
Now 'mcg_num' is incremented before the kzalloc(). So if the memory
allocation fails, this increment must be undone.
Fixes: a926a903b7 ("RDMA/rxe: Do not call dev_mc_add/del() under a spinlock")
Link: https://lore.kernel.org/r/fe137cd8b1f17593243aa73d59c18ea71ab9ee36.1653225896.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca1a10046 ]
This reverts commit c7dacf5b0f,
"mailbox: avoid timer start from callback"
The previous commit was reverted since it lead to a race that
caused the hrtimer to not be started at all. The check for
hrtimer_active() in msg_submit() will return true if the
callback function txdone_hrtimer() is currently running. This
function could return HRTIMER_NORESTART and then the timer
will not be restarted, and also msg_submit() will not start
the timer. This will lead to a message actually being submitted
but no timer will start to check for its compleation.
The original fix that added checking hrtimer_active() was added to
avoid a warning with hrtimer_forward. Looking in the kernel
another solution to avoid this warning is to check hrtimer_is_queued()
before calling hrtimer_forward_now() instead. This however requires a
lock so the timer is not started by msg_submit() inbetween this check
and the hrtimer_forward() call.
Fixes: c7dacf5b0f ("mailbox: avoid timer start from callback")
Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5e363eac ]
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes: e567b98ce9 (“nfsd: protect concurrent access to nfsd stats counters”)
Signed-off-by: Julian Schroeder <jumaco@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 311242c770 ]
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: b5e29aa880 ("mfd: davinci_voicecodec: Remove pointless #include")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c680c6a814 ]
We should have 'n', then 'size', not the opposite.
This is harmless because the 2 values are just multiplied, but having
the correct order silence a (unpublished yet) smatch warning.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>