This series includes the patches to add basic support for new UniPhier NX1
SoC. NX1 SoC also has the same kinds of controls as the other UniPhier
SoCs.
Kunihiko Hayashi (2):
dt-bindings: regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
.../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 +
drivers/regulator/uniphier-regulator.c | 4 ++++
2 files changed, 5 insertions(+)
--
2.7.4
Tagged to allow further bindings to rely on these.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFgkpYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OPnB/9M7HLzuTV7mkG0buI1vIPDjuSCWsr/
TZ9IuZIy0OmtdcXq9F0VyRq6wy6bVMXVSlrlFQLnrPLFW1/MIqeyPmLJyqwKVYh/
lyrAaHfeKck2S2ususisudBr/Qkg0ZrEX2f1eLC03xBnBEOy3Nl71s/HxbO9n4yt
ZAUk/1/UlmbhQKNlNgMtfXuXtLCGm3GRL30jb4nb/hGj/8Xb0ESmnRmkmZnVi/+H
DgHGHLDeK3Y5ntQx8IwbrPFimlvAGVgfU/ruf7Z6zmpuW2tKKcLE7ZAR8DG5ZRhw
W3WPq6YYUzAhyxgY0U2iO6wrL5rKvo65CbGOvpk9RsCYk2GxQS6BqHWX
=P4cy
-----END PGP SIGNATURE-----
Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Hi All,
Changes since v2
================
1. Add Stephen's and Rob's tags.
2. Correct inb-supply description in patch 10/10.
Changes since v2
================
1. Add Rob's tags.
2. Remove "regulator-name" from properties (all regulator dtschema).
3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema).
4. Add ref-type to op-mode property (patch 6: s5m8767 regulators).
Changes since v1
================
1. Drop DTS patches - applied.
2. Fully remove bindings/regulator/samsung,s5m8767.txt .
3. Minor subject reformatting and few typos in text.
Intro
=====
This patchset converts all devicetree bindings of Samsung S2M and S5M
PMIC devices from txt to dtschema.
It includes also two fixes because later conversion depends on it
(contextually).
Merging/dependencies
====================
1. Regulator related binding changes depend on first two commits (the
fixes), because of context.
2. The mfd bindings depend on clock and regulator bindings.
The fixes and bindings changes (patches 1-10) should go via the same
tree. For example regulator or mfd tree.
Another alternative is that regulator patches (1-2, 4-6) go via Mark who
later gives MFD a stable branch/tag to pull. Then the clock and MFD
bindings would go on top via MFD tree. Or any other setup you would like
to have.
Overview of devices
===================
Essentially all Samsung S2M and S5M PMICs are very similar devices. They
provide the same functionality: regulators, RTC, 2 or 3 clocks and main
power management (e.g. power cut to SoC).
The differences are mostly in registers layout and number of regulators.
The drivers are built around one common part, mfd/sec-core.c, and share
some drivers between devices:
1. MFD sec-core for all devices,
1. one clock driver for most of devices,
2. one RTC driver for all devices,
3. three regulator drivers.
The regulator drivers were implementing slightly different features,
therefore one regulator binding for all devices does not make much
sense. However the clock device binding can be shared.
The final dtschema bindings try to implement this - share only the clock
bindings.
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS
is disabled
regulator: dt-bindings: samsung,s5m8767: correct
s5m8767,pmic-buck-default-dvs-idx property
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s2mps11: convert to dtschema
dt-bindings: mfd: samsung,s2mpa01: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies
.../bindings/clock/samsung,s2mps11.txt | 49 ---
.../bindings/clock/samsung,s2mps11.yaml | 45 +++
.../bindings/mfd/samsung,s2mpa01.yaml | 91 ++++++
.../bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++++++
.../bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++++++++
.../bindings/mfd/samsung,sec-core.txt | 86 -----
.../bindings/regulator/samsung,s2mpa01.txt | 79 -----
.../bindings/regulator/samsung,s2mpa01.yaml | 62 ++++
.../bindings/regulator/samsung,s2mps11.txt | 102 ------
.../bindings/regulator/samsung,s2mps11.yaml | 44 +++
.../bindings/regulator/samsung,s2mps13.yaml | 44 +++
.../bindings/regulator/samsung,s2mps14.yaml | 44 +++
.../bindings/regulator/samsung,s2mps15.yaml | 44 +++
.../bindings/regulator/samsung,s2mpu02.yaml | 44 +++
.../bindings/regulator/samsung,s5m8767.txt | 145 ---------
.../bindings/regulator/samsung,s5m8767.yaml | 74 +++++
MAINTAINERS | 9 +-
drivers/regulator/s5m8767.c | 21 +-
18 files changed, 1080 insertions(+), 477 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
--
2.30.2
Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung S2MPA01 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung
S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02 family of PMICs to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-1-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver and its bindings, before commit 04f9f068a6 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a6 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a6 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim MAX8973 regulator to DT schema format. Extend the
examples with more advanced one for MAX77621 copied from kernel's
nvidia/tegra210-smaug.dts, licensed under GPL-2.0.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008114755.148279-1-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim MAX8997 PMIC bindings to DT schema format. Extend the
examples with additional one copied from kernel's exynos4210-origen.dts.
Also the binding descriptions are copied from old file, so license
entire work under GPL-2.0.
This also adds previously undocumented 32 kHz clock output modelled as
regulators.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211001130249.80405-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Silergy SY8106A is a regulator controlled through i2c supported by
Linux with a matching device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-34-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
A few driver specific fixes that came in since the merge window, plus a
change to mark the regulator-fixed-domain DT binding as deprecated in
order to try to to discourage any new users while a better solution is
put in place.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmD4WckACgkQJNaLcl1U
h9DltAgAgxwqrdGPLt/0rGlhpI183L6x81fbLcbvVYwWiyUDqU1rSqZhR+UnxkOf
3tOX4B+4EJTNpArLRcoXD2uu1KP92AhOwv3uGKsJGibS0OC6AwV7adyK+qkBuZsS
IJgyI63YfRGP1udWfklZle+CxK6JIRMILbT9oTMGoWrPnK3QfS2rNDapTtpfYRn1
PTIu0TqMQ6xKHg8XPbtmD4INbrbhxP0H3848g0ZhohGozEwggKSEwB1c55cbQc2J
I3HpBMVk3sO0UrG6NBpX+fSj0BT4MwjNdFDgmstgwEn/31gSSDjAxaHnfZqWLJqJ
cW6rlhw0eSqRXAjrqh6WfK5QiojRXw==
=+jG2
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes that came in since the merge window, plus
a change to mark the regulator-fixed-domain DT binding as deprecated
in order to try to to discourage any new users while a better solution
is put in place"
* tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: hi6421: Fix getting wrong drvdata
regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register
regulator: fixed: Mark regulator-fixed-domain as deprecated
regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch
regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure
regulator: rt5033: Fix n_voltages settings for BUCK and LDO
regulator: rtmv20: Fix wrong mask for strobe-polarity-high
There's no need for fixed strings to be under 'patternProperties', so move
them under 'properties' instead.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210713193514.690894-1-robh@kernel.org
A power domain should not be modelled as a regulator, not even for the
simplest case as recent discussions have concluded around the existing
regulator-fixed-domain DT binding.
Fortunately, there is only one user of the binding that was recently added.
Therefore, let's mark the binding as deprecated to prevent it from being
further used.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210705133441.11344-1-ulf.hansson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes since v2:
-----------------
- v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21
- Addressed review comments from Bjorn and Mark.
- As per suggestion from Bjorn, seperated the patches in different
patchsets (specific to each subsystem) to ease review and patch application.
Changes since v1:
-----------------
- v1 series can be found here: https://lore.kernel.org/linux-arm-msm/20210607113840.15435-1-bhupesh.sharma@linaro.org/T/#mc524fe82798d4c4fb75dd0333318955e0406ad18
- Addressed review comments from Bjorn and Vinod received on the v1
series.
This series adds the regulator support code for SA8155p-adp board
which is based on Qualcomm snapdragon sa8155p SoC which in turn is
simiar to the sm8150 SoC.
This board supports a new PMIC PMM8155AU.
While at it, also make some cosmetic changes to the regulator driver
and dt-bindings to make sure the compatibles are alphabetical and also
fix issues with extra comma(s) at the end of terminator line(s).
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Bhupesh Sharma (5):
dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles
alphabetically
dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for
SA8155p-adp board pmic
regulator: qcom-rpmh: Cleanup terminator line commas
regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[]
array
regulator: qcom-rpmh: Add new regulator found on SA8155p adp board
.../regulator/qcom,rpmh-regulator.yaml | 17 ++---
drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++----
2 files changed, 59 insertions(+), 20 deletions(-)
--
2.31.1
Extend regulator notification support
This series extends the regulator notification and error flag support.
Initial discussion on the topic can be found here:
https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/
In a nutshell - the series adds:
1. WARNING level events/error flags. (Patch 3)
Current regulator 'ERROR' event notifications for over/under
voltage, over current and over temperature are used to indicate
condition where monitored entity is so badly "off" that it actually
indicates a hardware error which can not be recovered. The most
typical hanling for that is believed to be a (graceful)
system-shutdown. Here we add set of 'WARNING' level flags to allow
sending notifications to consumers before things are 'that badly off'
so that consumer drivers can implement recovery-actions.
2. Device-tree properties for specifying limit values. (Patches 1, 5)
Add limits for above mentioned 'ERROR' and 'WARNING' levels (which
send notifications to consumers) and also for a 'PROTECTION' level
(which will be used to immediately shut-down the regulator(s) W/O
informing consumer drivers. Typically implemented by hardware).
Property parsing is implemented in regulator core which then calls
callback operations for limit setting from the IC drivers. A
warning is emitted if protection is requested by device tree but the
underlying IC does not support configuring requested protection.
3. Helpers which can be registered by IC. (Patch 4)
Target is to avoid implementing IRQ handling and IRQ storm protection
in each IC driver. (Many of the ICs implementin these IRQs do not allow
masking or acking the IRQ but keep the IRQ asserted for the whole
duration of problem keeping the processor in IRQ handling loop).
4. Emergency poweroff function (refactored out of the thermal_core to
kernel/reboot.c) which is called if IC fires error IRQs but IC reading
fails and given retry-count is exceeded. (Patches 2, 4)
Please note that the mutex in the emergency shutdown was replaced by a
simple atomic in order to allow call from any context.
The helper was attempted to be done so it could be used to implement
roughly same logic as is used in qcom-labibb regulator. This means
amongst other things a safety shut-down if IC registers are not readable.
Using these shut-down retry counters are optional. The idea is that the
helper could be also used by simpler ICs which do not provide status
register(s) which can be used to check if error is still active.
ICs which do not have such status register can simply omit the 'renable'
callback (and retry-counts etc) - and helper assumes the situation is Ok
and re-enables IRQ after given time period. If problem persists the
handler is ran again and another notification is sent - but at least the
delay allows processor to avoid IRQ loop.
Patch 7 takes this notification support in use at BD9576MUF.
Patch 8 is related to MFD change which is not really related to the RFC
here. It was added to this series in order to avoid potential conflicts.
Patch 9 adds a maintainers entry.
Changelog v10-RESEND:
- rebased on v5.13-rc4
Changelog v10:
- rebased on v5.13-rc2
- Move rdev_*() print macros to the internal.h and use rdev_dbg()
from irq_helpers.c
- Export rdev_get_name() and move it from coupler.h to driver.h for
others to use. (It was already in coupler.h but not exported -
usage was limited and coupler.h does not sound like optimal place
as rdev_name is not only used by coupled regulators)
- Send all regulator notifications from irq_helpers.c at one OR'd
event for the sake of simplicity. For BD9576 this does not matter
as it has own IRQ for each event case. Header defining events says
they may be OR'd.
- Change WARN() at protection shutdown to pr_emerg as suggested by
Petr.
Changelog v9:
- rebases on v5.13-rc1
- Update thermal documentation
- Fix regulator notification event number
Changelog v8:
- split shutdown API adding and thermal core taking it in use to
own patches.
- replace the spinlock with atomic when ensuring the emergency
shutdown is only called once.
Changelog v7:
general:
- rebased on v5.12-rc7
- new patch for refactoring the hw-failure reboot logic out of
thermal_core.c for others to use.
notification helpers:
- fix regulator error_flags query
- grammar/typos
- do not BUG() but attempt to shut-down the system
- use BITS_PER_TYPE()
Changelog v6:
Add MAINTAINERS entry
Changes to IRQ notifiers
- move devm functions to drivers/regulator/devres.c
- drop irq validity check
- use devm_add_action_or_reset()
- fix styling issues
- fix kerneldocs
Changelog v5:
- Fix the badly formatted pr_emerg() call.
Changelog v4:
- rebased on v5.12-rc6
- dropped RFC
- fix external FET DT-binding.
- improve prints for cases when expecting HW failure.
- styling and typos
Changelog v3:
Regulator core:
- Fix dangling pointer access at regulator_irq_helper()
stpmic1_regulator:
- fix function prototype (compile error)
bd9576-regulator:
- Update over current limits to what was given in new data-sheet
(REV00K)
- Allow over-current monitoring without external FET. Set limits to
values given in data-sheet (REV00K).
Changelog v2:
Generic:
- rebase on v5.12-rc2 + BD9576 series
- Split devm variant of delayed wq to own series
Regulator framework:
- Provide non devm variant of IRQ notification helpers
- shorten dt-property names as suggested by Rob
- unconditionally call map_event in IRQ handling and require it to be
populated
BD9576 regulators:
- change the FET resistance property to micro-ohms
- fix voltage computation in OC limit setting
BD9576MUF provides over-current protection and detection. Current is
measured as voltage loss over external FET. Allow specifying FET's on
resistance so current monitoring limits can be converted to voltages.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/e5feb160d7e09f33fff5b88f1928c66a15c6680f.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support specifying protection/error/warning limits for regulator
over current, over temperature and over/under voltage.
Most of the PMICs support only "protection" feature but few
setups do also support error/warning level indications.
On many ICs most of the protection limits can't actually be set.
But for example the ampere limit for over-current protection on ROHM
BD9576 can be configured - or feature can be completely disabled.
Provide limit setting for all protections/errors for the sake of
the completeness and do that using own properties for all so that
not all users would need to set all levels when only one or few are
supported.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ae2c6056d5ed1334912d27e736d23c9151065433.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string for pmm8155au pmic found on
the SA8155p-adp board.
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-3-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
add dt-binding document for MediaTek MT6359 PMIC
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmCJIPEACgkQUa+KL4f8
d2FRZA//Xu9f8u2uLuIfuhxIjUUXOqIjRAFnkhKlgGZhKsY8BohjQ80Tj9yp6UKy
St6ABwACO0hJap4zL4FxPW9+HXTmqZvAibnvHnvZdYSQ3ai6x9h6kTNvhSNLeRQU
fuY7eN8kpAHHiHNKNJCsQLQMvcIyP7+0KAP6qir5GYsMjiXspWq7THUnfBi2JXC6
y60guDo9XrgmQTO+pB870UJrKLM/h+iiohNRGxLFlShKhFCgbTB/wyw6bFeKy1SB
0/6XuY6fOt1IQyBDuzw383Q2faMWO9U+es29bwvFxdqJDK0MHQXC47zBba2q94wL
/9i/HSoz9dRHnTJNYUKWsVcPv4T84w/Iq7scyDvE00ubehJ+oo/M7Au3M6Tt3M1/
6lBAwFYXiwhQnp9EP3nwPwgJF6JzX1IGuMOsUAqrVFOEMuIkZKbRdUlatUhqepJT
spV4/TOfztAhY/7BzEOZLnF8cFNjmL5sn42/UzSRW708V5SxuTNsS48KJ4l0c7Er
CZSTlR/T1rKkWqf7ejaS2TNqMCdYyB3vZW0quDxZTHTZHv9huNUvtbKPR7jmd+4p
mrMIik7EE4BzC5m8tBPnXXZl+Og0keeYv4LUDBuLDX1agrxYIErl4ITvQTqqMfX1
Jt14SIjSO56iu2ngQuvGWwegVK4/urO2kBJKUAH1QN1OocNaajQ=
=IJSL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
- Refactoring powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmCIYdgQHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhw/PKEACkOCWDnLSY9U7w1uGDHr6UgXIWOY9j8bYy
2pTvDrVa6KZphT6yGU/hxrOk8Mqh5AMd2vUhO2OCoyyl/priTv+Ktqo+bikvJZLa
MQm3JnrLpPy/GetdmVD8wq1l+FoeOSTnRIJqRxInsd8UFVpZImtP22ELox6KgGiv
keVHIrjsHU/HpafK3w8wHCLikCZk+1Gl6pL/QgFDv2FaaCTKW16Dt64dPqYm49Xk
j7YMMQWl+3NJ9ywZV0+PMbl9udi3EjGm5Ap5VfKzpj53Nh07QObg/QtH/1sj0HPo
apyW7jAyQFyLytbjxzFL/tljtOeW/5rZos1GWThZ326e+Y0mTKUTDZShvNplfjIf
e26FvVi7gndWlRSr30Ia5gdNFAx72IkpJUAuypBXgb+qNPchBJjAXLn9tcIcg/k+
2R6BIB7SkVLpgTnJ1Bq1+PRqkKM+ggACdJNJIUApj44xoiG01vtGDGRaFuIio+Ch
HT4aBbic4kLvagm8VzuiIF/sL7af5pntzArcyOfQTaZ92DyGI2C0j90rK3yPRIYM
u9qX/24t1SXiUji74QpoQFzt/+Egy5hYXMJOJJSywUjKf7DBhehqklTjiJRQHKm6
0DJ/n8q4lNru8F0Y4keKSuYTfHBstF7fS3UTH/rUmBAbfEwkvZe6B29KQbs+7aph
GTw+jeoR5Q==
=rF27
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
Add a compatible string to support TCS4525/TCS4526 devices,
which are compatible with Fairchild FAN53555 regulators.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210421210338.43819-2-ezequiel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add binding documentation for regulators on ROHM BD71815 PMIC.
5 bucks, 7 LDOs and a boost for LED.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Properties with standard unit suffixes already have a type and don't need
type references. Fix a few more cases which have gotten added.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Kevin Tsai <ktsai@capellamicro.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Dmity Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20210316194824.3526913-1-robh@kernel.org
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
-----BEGIN PGP SIGNATURE-----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=oW7V
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
Short-Circuit Protection (SCP) and Over-Current Protection (OCP) are
now implemented in the driver: document the interrupts.
This also fixes wrong documentation about the SCP interrupt for LAB.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210119174421.226541-7-angelogioacchino.delregno@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document properties to configure soft start and discharge resistor
for LAB and IBB respectively.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210119174421.226541-5-angelogioacchino.delregno@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This property seems useless because we can use the
regulator-max-microamp generic property to do the same
and using generic code.
As this property was already released in a kernel version,
we can't remove it, just mark it as deprecated
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Link: https://lore.kernel.org/r/20210114174714.122561-4-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nxp,phase-shift is an enum so use enum format to describe it.
Minimum and maximum values are also wrong.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210114174714.122561-3-adrien.grassein@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.
base-commit: 5c8fe583cc
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The
major difference is the S2 regulator which supplies 0.95 V instead of
2.848V. Add special compatibility string for this chip revision.
The datasheet calls the chip just pm8009-1, so use the same name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
*-supply properties are always a single phandle, so binding schemas
don't need a type $ref nor 'maxItems'.
A meta-schema check for this is pending once these existing cases are
fixed.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-media@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201221234659.824881-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The pf8x00 driver supports three devices, the DT compatible strings
and I2C IDs should enumerate these specifically rather than using a
wildcard so that we don't collide with anything incompatible in the
same ID range in the future and so that we can handle any software
visible differences between the variants we find.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201215132024.13356-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PM8350 and PM8350C compatibles for these PMICs found in some
Qualcomm platforms.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201203071244.2652297-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update bindings for the Dialog Semiconductor DA9121 voltage regulator to
add device variants.
Because several variants have multiple regulators, and to regard potential
to add GPIO support in future, the 'regulators' sub-node is added,
following the precedent set by other multi-regulator devices, including
the DA9211 family. This breaks compatibility with the original submission
by Vincent Whitchurch - but as this is still in for-next, the alignment
could be made before upstreaming occurs.
Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/0606d3ded5fef4c38760246146f197db4ce3a374.1606755367.git.Adam.Ward.opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RFC for adding a support for typical voltage scaling connection
In few occasions there has been a need to scale the voltage output
from bucks on BD71837. Usually this is done when buck8 is used to
power specific GPU which can utilize voltages down to 0.7V. As lowest
the buck8 on BD71837 can go is 0.8V, and external connection is used to
scale the voltages.
The BD71837, BD71847 and BD71850 bucks can be adjusted by pulling up the
feedback pin using suitable voltage/resistors.
|---------------|
| buck 8 |-------+----->Vout
| | |
|---------------| |
| |
| |
+-------+--R2----+
|
R1
|
V FB-pull-up
This will scale the voltage as follows:
- Vout_o = Vo - (Vpu - Vo)*R2/R1
- Linear_step = step_orig*(R1+R2)/R1
where:
Vout_o is adjusted voltage output at vsel reg value 0
Vo is original voltage output at vsel reg value 0
Vpu is the pull-up voltage V FB-pull-up in the picture
R1 and R2 are resistor values.
>From HW point of view this does not need to be limited to buck 8. This
connection can be used to adjust output from any of the bucks on
BD71837/47/50.
As this seems to be a 'de-facto' way to scale the voltages on BD71837 it
might be a good idea to support computing the new voltage ranges for
bucks based on the V-pull-up and resistor R1/R2 values given from
device-tree. This allows describing the external HW connection using DT
to correctly scale the voltages.
This RFC uses "rohm,feedback-pull-up-r1-ohms" and
"rohm,feedback-pull-up-r2-ohms" to provide the resistor values - but
these names (without the picture) might not be too descriptive. I am
grateful for all suggestions as better and more descriptive names.
This patch series is an RFC because this connection feels somewhat
"hacky". OTOH - when hack becomes widely used, it is less of an hack and
more of a standard - and occasionally supporting HW hacks using SW may
benefit us all, right? :)
The other thing some projects do is allowing the change of BD71837 buck8
voltages when buck8 is enabled. This however will introduce voltage
spikes as buck8 was not originally designed for this. The specific HW
platform must be evaluated to be able to tolerate these spikes. Thus
this patch series does not support buck8 voltage changes when buck8 is
enabled. I wonder if this should be allowed per some config option(?) I
don't want to help people frying their boards... Opinions? Is there
suggested way of allowing this type of features at own risk? Config or
even Some #ifdef which is not listed in Kconfig? Device-tree property?
If you have (good) suggestions I could add the optional (non default)
DVS support for non DVS bucks on BD71837.
Matti Vaittinen (3):
dt-bindings: regulator: BD71837 support commonly used feedback
connection
dt-bindings: regulator: BD71847 support commonly used feedback
connection
regulator: bd718x7: Support external connection to scale voltages
.../regulator/rohm,bd71837-regulator.yaml | 48 +++++
.../regulator/rohm,bd71847-regulator.yaml | 49 ++++++
drivers/regulator/bd718x7-regulator.c | 164 +++++++++++++++++-
3 files changed, 254 insertions(+), 7 deletions(-)
base-commit: 3cea11cd5e
--
2.21.3
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
The BD71847 buck output voltages are in a few cases scaled using external
connection which adds a pull-up to regulator feedback pin. This connection
will adjust output voltage from regulator in a deterministic way.
Add support for describing this HW connection so that driver can adjust
voltage ranges accordingly.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9b6b3d8233071d478f7d1e93b498f5a2141941e6.1604994184.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BD71837 buck output voltages are in a few cases scaled using external
connection which adds a pull-up to regulator feedback pin. This connection
will adjust output voltage from regulator in a deterministic way.
Add support for describing this HW connection so that driver can adjust
voltage ranges accordingly.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9959924313db7c7165598604f9a07bf227f471a8.1604994184.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no $ref at the top level so use additionalProperties instead of
unevaluatedProperties.
This fixes the following warning with the latest dtschema:
Documentation/devicetree/bindings/regulator/dlg,da9121.yaml:
'additionalProperties' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20201109085438.16230-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Another round of wack-a-mole. The json-schema default is additional
unknown properties are allowed, but for DT all properties should be
defined.
Signed-off-by: Rob Herring <robh@kernel.org>
Define bindings for fixed regulator using power domain performance state
to enable/disable corresponding regulator.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201023131925.334864-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Update dtc to upstream version v1.6.0-31-gcbca977ea121
- dtx_diff help text reformatting
- Speed-up validation time for binding and dtb checks using json for
intermediate files
- Add support for running yamllint on DT schema files
- Remove old booting-without-of.rst
- Extend the example schema to address common issues
- Cleanup handling of additionalProperties/unevaluatedProperties
- Ensure all DSI controller schemas reference dsi-controller.yaml
- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex, DFI,
and Cisco Meraki
- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema
- Convert HiSilicon SoC and syscon bindings to DT schema
- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema
- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR,
SATA, vf610 GPIO, and UART to DT schema
- Add i.MX 8M compatible strings
- Add LM81 and DS1780 as trivial devices
- Various missing properties added to fix dtb validation warnings
-----BEGIN PGP SIGNATURE-----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=gL4K
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Update dtc to upstream version v1.6.0-31-gcbca977ea121
- dtx_diff help text reformatting
- Speed-up validation time for binding and dtb checks using json for
intermediate files
- Add support for running yamllint on DT schema files
- Remove old booting-without-of.rst
- Extend the example schema to address common issues
- Cleanup handling of additionalProperties/unevaluatedProperties
- Ensure all DSI controller schemas reference dsi-controller.yaml
- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
DFI, and Cisco Meraki
- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema
- Convert HiSilicon SoC and syscon bindings to DT schema
- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema
- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
GPIO, and UART to DT schema
- Add i.MX 8M compatible strings
- Add LM81 and DS1780 as trivial devices
- Various missing properties added to fix dtb validation warnings
* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
dt-bindings: misc: explicitly add #address-cells for slave mode
spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
dt: Remove booting-without-of.rst
dt-bindings: update usb-c-connector example
dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
dt-bindings: pwm: imx: document i.MX compatibles
scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
dt-bindings: Add running yamllint to dt_binding_check
dt-bindings: powerpc: Add a schema for the 'sleep' property
dt-bindings: pinctrl: sirf: Fix typo abitrary
dt-bindings: pinctrl: qcom: Fix typo abitrary
dt-bindings: Explicitly allow additional properties in common schemas
dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
dt-bindings: Add missing 'unevaluatedProperties'
Docs: Fixing spelling errors in Documentation/devicetree/bindings/
dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
dt-bindings: riscv: convert pwm bindings to json-schema
dt-bindings: riscv: convert plic bindings to json-schema
dt-bindings: fu540: prci: convert PRCI bindings to json-schema
...
In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As common/shared
schema are included by other schemas, they should always allow for
additionalProperties.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as 'unevaluatedProperties'
support isn't implemented yet.
In a few cases, this means adding some missing property definitions of
which most are for SPI bus properties. 'unevaluatedProperties' is not going
to work for the SPI bus properties anyways as they are evaluated from the
parent node, not the SPI child node.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.
'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.
This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SMD-RPM regulator entries for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-8-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SPMI regulator bindings for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-5-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add vendor suffix to all proprietary properties.
2. Fix typo.
3. Change lsw to normal property, not pattern property.
4. Due to item 1, modify source code for property parsing.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1601460480-4259-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ROHM BD9576MUF and BD9573MUF PMICs.
These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.
Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.
This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:
- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.
This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.
---
Matti Vaittinen (6):
dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
mfd: Support ROHM BD9576MUF and BD9573MUF
wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
regulator: Support ROHM BD9576MUF and BD9573MUF
MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers
.../bindings/mfd/rohm,bd9576-pmic.yaml | 129 +++++++
.../regulator/rohm,bd9576-regulator.yaml | 33 ++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd9576.c | 130 +++++++
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd9576-regulator.c | 337 ++++++++++++++++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd9576_wdt.c | 295 +++++++++++++++
include/linux/mfd/rohm-bd957x.h | 61 ++++
include/linux/mfd/rohm-generic.h | 2 +
14 files changed, 1028 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
create mode 100644 drivers/mfd/rohm-bd9576.c
create mode 100644 drivers/regulator/bd9576-regulator.c
create mode 100644 drivers/watchdog/bd9576_wdt.c
create mode 100644 include/linux/mfd/rohm-bd957x.h
base-commit: f4d51dffc6
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Convert the mp886x binding to DT schema format using json-schema.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200827150640.267f6edc@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
The BD718(37/47/50) regulator enable states can be controlled either by SW
or by PMIC internal state machine.
On some systems mixture of SW and HW state machine controlled regulators is
needed.
Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators then to
be disabled (by PMIC state machine) while other regulators should stay
enabled (regardless of HW state => SW control required).
Add a new device-tree property "rohm,no-regulator-enable-control" which can
be used to leave regulator(s) under HW state machine control.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/51022c60412297ad9b22501452d60ba2dce38d2e.1599029334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BD718(37/47/50) regulator enable states can be controlled either by SW
or by PMIC internal state machine.
On some systems mixture of SW and HW state machine controlled regulators is
needed.
Specifically, some SoCs signal SUSPEND state change to PMIC via
STBY_REQ line. Now there are setups that expect certain regulators then to
be disabled (by PMIC state machine) while other regulators should stay
enabled (regardless of HW state => SW control required).
Add a new device-tree property "rohm,no-regulator-enable-control" which can
be used to leave regulator(s) under HW state machine control.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9ff1104579093e7977944be769d625b9e33bc663.1599029334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As Rob suggested, use the "mps,switch-frequency-hz" instead of the
"mps,switch-frequency" for switch frequency. Fortunately, the switch
frequency support isn't released, so we can modify it now without
any concern.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200824102402.4047fa5f@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
Jisheng Zhang <Jisheng.Zhang@synaptics.com>:
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
This is to improve the mp886x regulator driver support.
patch1 implments .set_ramp_delay
patch2 and patch3 support the switch freq setting
patch4 converts dt binding to json-schema
Since v2:
- put any schema conversions at the end of the series as Mark
suggested.
Jisheng Zhang (4):
regulator: mp886x: implement set_ramp_delay
dt-bindings: regulator: mp886x: support mps,switch-frequency
regulator: mp886x: support setting switch freq
dt-bindings: regulator: Convert mp886x to json-schema
.../devicetree/bindings/regulator/mp886x.txt | 27 -----
.../bindings/regulator/mps,mp886x.yaml | 58 ++++++++++
drivers/regulator/mp886x.c | 109 +++++++++++++++++-
3 files changed, 164 insertions(+), 30 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
--
2.28.0.rc1
Convert the sy8824x binding to DT schema format using json-schema.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200803144436.5d2b7e54@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DT bindings for RaspberryPi 7" display ATTINY88-based
regulator/backlight controller, this one is used in the
Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20200809105938.6388-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Both MP8867 and MP8869 support different switch frequency.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200729130952.260671f1@xhacker
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200719200623.61524-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding the devicetree binding for labibb regulator.
[sumits: cleanup as per review comments and update to yaml]
Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200622124110.20971-3-sumit.semwal@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset adds support for being able to change regulator modes for
the mt6397 regulator. This is needed to allow the voltage scaling
support in the MT8173 SoC to be used on the elm (Acer Chromebook R13)
and hana (several Lenovo Chromebooks) devices.
Without a of_map_mode implementation, the regulator-allowed-modes
devicetree field is skipped, and attempting to change the regulator mode
results in an error:
[ 1.439165] vpca15: mode operation not allowed
Changes in v2:
- Introduce constants in dt-bindings
- Improve conditional readability
Anand K Mistry (4):
regulator: mt6397: Move buck modes into header file
dt-bindings: regulator: mt6397: Document valid modes
regulator: mt6397: Implement of_map_mode
arm64: dts: mediatek: Update allowed mt6397 regulator modes for elm
boards
.../bindings/regulator/mt6397-regulator.txt | 3 +++
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 +++-
drivers/regulator/mt6397-regulator.c | 17 ++++++++++++++---
.../regulator/mediatek,mt6397-regulator.h | 15 +++++++++++++++
4 files changed, 35 insertions(+), 4 deletions(-)
create mode 100644 include/dt-bindings/regulator/mediatek,mt6397-regulator.h
--
2.27.0.212.ge8ba1cc988-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
This patchset adds support for being able to change regulator modes for
the da9211 regulator. This is needed to allow the voltage scaling
support in the MT8173 SoC to be used in the elm (Acer Chromebook R13)
and hana (several Lenovo Chromebooks) devices.
Anand K Mistry (4):
regulator: da9211: Move buck modes into header file
dt-bindings: regulator: da9211: Document allowed modes
regulator: da9211: Implement of_map_mode
arm64: dts: mediatek: Update allowed regulator modes for elm boards
.../devicetree/bindings/regulator/da9211.txt | 4 +++
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++-
drivers/regulator/da9211-regulator.c | 30 +++++++++++++++----
.../regulator/dlg,da9211-regulator.h | 16 ++++++++++
4 files changed, 47 insertions(+), 7 deletions(-)
create mode 100644 include/dt-bindings/regulator/dlg,da9211-regulator.h
--
2.27.0.212.ge8ba1cc988-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Changes in v4:
- Modified qcom,pmic-typec binding to include the SS mux and the DRD remote
endpoint nodes underneath port@1, which is assigned to the SSUSB path
according to usb-connector
- Added usb-connector reference to the typec dt-binding
- Added tags to the usb type c and vbus nodes
- Removed "qcom" tags from type c and vbus nodes
- Modified Kconfig module name, and removed module alias from the typec driver
Changes in v3:
- Fix driver reference to match driver name in Kconfig for
qcom_usb_vbus-regulator.c
- Utilize regulator bitmap helpers for enable, disable and is enabled calls in
qcom_usb_vbus-regulator.c
- Use of_get_regulator_init_data() to initialize regulator init data, and to
set constraints in qcom_usb_vbus-regulator.c
- Remove the need for a local device structure in the vbus regulator driver
Changes in v2:
- Use devm_kzalloc() in qcom_pmic_typec_probe()
- Add checks to make sure return value of typec_find_port_power_role() is
valid
- Added a VBUS output regulator driver, which will be used by the PMIC USB
type c driver to enable/disable the source
- Added logic to control vbus source from the PMIC type c driver when
UFP/DFP is detected
- Added dt-binding for this new regulator driver
- Fixed Kconfig typec notation to match others
- Leave type C block disabled until enabled by a platform DTS
Add the required drivers for implementing type C orientation and role
detection using the Qualcomm PMIC. Currently, PMICs such as the PM8150B
have an integrated type C block, which can be utilized for this. This
series adds the dt-binding, PMIC type C driver, and DTS nodes.
The PMIC type C driver will register itself as a type C port w/ a
registered type C switch for orientation, and will fetch a USB role switch
handle for the role notifications. It will also have the ability to enable
the VBUS output to any connected devices based on if the device is behaving
as a UFP or DFP.
Wesley Cheng (6):
usb: typec: Add QCOM PMIC typec detection driver
dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
arm64: boot: dts: qcom: pm8150b: Add node for USB type C block
regulator: Add support for QCOM PMIC VBUS booster
dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output
regulator
arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
.../regulator/qcom,usb-vbus-regulator.yaml | 41 +++
.../bindings/usb/qcom,pmic-typec.yaml | 113 +++++++
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 13 +
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_usb_vbus-regulator.c | 97 ++++++
drivers/usb/typec/Kconfig | 12 +
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++
10 files changed, 567 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c
create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
This describes how to enable the Qualcomm PMIC VBUS booster used for
providing power to connected USB peripherals when the USB role is host
mode. The driver itself will register the vbus_usb regulator, so that
external drivers can utilize the enable/disable regulator APIs.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200626185516.18018-6-wcheng@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for controlling voltage regulator that is connected and
controlled by ChromeOS EC. Kernel controls these regulators through
newly added EC host commands.
Changes from v5:
* Move new host command to a separate patch.
* Use devm_regulator_register.
* Address review comments.
Changes from v4:
* Change compatible name from regulator-cros-ec to cros-ec-regulator.
Changes from v3:
* Fix dt bindings file name.
* Remove check around CONFIG_OF in driver.
* Add new host commands to cros_ec_trace.
* Address review comments.
Changes from v2:
* Add 'depends on OF' to Kconfig.
* Add Kconfig description about compiling as module.
Changes from v1:
* Change compatible string to google,regulator-cros-ec.
* Use reg property in device tree.
* Change license for dt binding according to checkpatch.pl.
* Address comments on code styles.
Pi-Hsun Shih (3):
dt-bindings: regulator: Add DT binding for cros-ec-regulator
platform/chrome: cros_ec: Add command for regulator control.
regulator: Add driver for cros-ec-regulator
.../regulator/google,cros-ec-regulator.yaml | 51 ++++
drivers/platform/chrome/cros_ec_trace.c | 5 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/cros-ec-regulator.c | 257 ++++++++++++++++++
.../linux/platform_data/cros_ec_commands.h | 82 ++++++
6 files changed, 406 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
create mode 100644 drivers/regulator/cros-ec-regulator.c
base-commit: b791d1bdf9
--
2.27.0.290.gba653c62da-goog
Add DT binding documentation for cros-ec-regulator, a voltage regulator
controlled by ChromeOS EC.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200612040526.192878-2-pihsun@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Another round of 'allOf' removals that came in this cycle.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
- Convert various DT (non-binding) doc files to ReST
- Various improvements to device link code
- Fix __of_attach_node_sysfs refcounting bug
- Add support for 'memory-region-names' with reserved-memory binding
- Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai
Awinic Technology Co., MikroTik, Silex Insight
- A bunch more binding conversions to DT schema. Only 3K to go.
- Add a minimum version check for schema tools
- Treewide dropping of 'allOf' usage with schema references. Not needed
in new json-schema spec.
- Some formatting clean-ups of schemas
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7ZYa8QHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhw/zyD/42ZlYc2mKW5cHjGWr6vGAXG0KZq6AvHbeY
setNPMhjKRKjWs/s3u0WVhEH7ZchzBhBi0PEVjqZCnxLTqkt+mdlelJVv3uYJVho
2ZJiIi5Iso+nNQ+wAEFG2EzhnLH35RXTdlECANnhGUht/JOJlgEqdjjxdj8CVyWG
0aGJRCRRGvzPiWAUyqcR/DpB+lz0ipaSNhxxECinT0OQ4OSheCJL811tQ5RGKZ24
z7C/W+iQbFKHu2Yf7+7vHWNCo6F3vW1LK36mfdwNYEvhg2edJRkW1kr9flkJCjCj
Hhe2nIQmPQFJkeI/NkccowJRs5onwv3UIuPqOuAhx49XiI/a1aJKD0Md9ljeCJKd
HOybAltDiYMHVBwWGtdednMbPNvHSlsjRby4PRGdmLBsOlgjaihosx/5Byx80JP3
CNNJVm712qgMh6VbG9FIJ0rCKmXO3LxsVraptosK271+uZqWeHB0+yJnsLXWje2M
kY6YYVLtnc4j4eOeFgX7RQqagXdgZ3dc+MCVFVU6rq2WIiqLycEeiMLzr/WV78O5
wA0iX8Z7m+hkYPAEcbvt6Uhf0/KbeFlhb6dMGg2uE0ISgdCpXhpw1s4AeOQTKKuv
vClzMPSXYkStD58CiYlUFqo01qoOvFVuPSLUa8ZbU5TMTYrwpcNX8FYXCEjz0tfc
j7PbUy9YvA==
=/MDi
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert various DT (non-binding) doc files to ReST
- Various improvements to device link code
- Fix __of_attach_node_sysfs refcounting bug
- Add support for 'memory-region-names' with reserved-memory binding
- Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
Shanghai Awinic Technology Co., MikroTik, Silex Insight
- A bunch more binding conversions to DT schema. Only 3K to go.
- Add a minimum version check for schema tools
- Treewide dropping of 'allOf' usage with schema references. Not needed
in new json-schema spec.
- Some formatting clean-ups of schemas
* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
dt-bindings: clock: Add documentation for X1830 bindings.
dt-bindings: mailbox: Convert imx mu to json-schema
dt-bindings: power: Convert imx gpcv2 to json-schema
dt-bindings: power: Convert imx gpc to json-schema
dt-bindings: Merge gpio-usb-b-connector with usb-connector
dt-bindings: timer: renesas: cmt: Convert to json-schema
dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
dt-bindings: timer: Convert i.MX GPT to json-schema
dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
dt-bindings: serial: Add binding for UART pin swap
dt-bindings: geni-se: Add interconnect binding for GENI QUP
dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
dt-bindings: input: touchscreen: edt-ft5x06: change reg property
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
dt-bindings: timer: renesas: mtu2: Convert to json-schema
of/fdt: Remove redundant kbasename function call
dt-bindings: clock: Convert i.MX1 clock to json-schema
dt-bindings: clock: Convert i.MX21 clock to json-schema
dt-bindings: clock: Convert i.MX25 clock to json-schema
...
Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl61lKwTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0HxeB/9dblIbC+28MvcEHXCcYBZBouOnrM8E
bIOMXkgEj1uL78ozOm7tMCgEpaKgv6BHdDuClCBvjbr0uOtAi0qUiv0IBotuVrdo
lq73l8l7OPz6TFFKIt8WsgwKnzdkuQC08+qrZasAdluRQnqnmkU2tvl2y9zaaaR4
6hGw+Nwx/pgeCXCa3pu+rCYwA7g0Tf8a6DDC6LyQWZameBJ1ey/YDjhJEeSmY7P7
306zs8YVxHhQMLUQ5T7DA6r/KWMNkO1SOueCqTjxWZc/XamGEcbsZG1cWrAnkoE2
VKLXBtYC75coNxIiu8ZxnQwLLdz1EQPdtg0qmzSjXJ68QjbWWzf4K1ra
=LG9G
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl61lPUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GuGB/9kDFxKo0DWsH6tqZGS/retk0ddT+4B
mnkkZGvoKkkDe1lh84vRbrPHhiI9LIXaj3lFgzyYeTuAi9tb77mPNnYIPLDye7bO
OvgJgovo4tK3dUVSUFatvOhuAMSZLyN2WjWRX+YeHMd1nNZSHxEz0CuG3npNtuKa
KoZd0Dfom4ds66qDlWdfonFhMJbMvQbEs4BhnfdvpD/soylyDB+29SHlhTBv8+UC
I7BNzsmVDlp/JyrX3yJbuTum9wbPaMLcyL96EbvRykmTywz5FXudffqzPfPnoQxT
rbN5DfwKsnySToUYDfp9dcIMyTF0/MtneaeBMRu2NIkpMmnicvExNrbU
=/+DM
-----END PGP SIGNATURE-----
Merge tag 'linear-ranges-lib' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-5.8
lib: Add linear ranges helper library and start using it
Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>
In this particular location additionalProperties actually declares a property
named `additionalProperties` instead of specifying there should be no other
properties.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20200425125335.2674534-1-iskren.chernev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.
In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.
Reported-by: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
- New Device Support
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
- New Functionality
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
- Fix-ups
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
- Bug Fixes
- Fix PCI IDs; intel-lpss-pci
-----BEGIN PGP SIGNATURE-----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=hJ2o
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"
* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
- Unit test for overlays with GPIO hogs
- Improve dma-ranges parsing to handle dma-ranges with multiple entries
- Update dtc to upstream version v1.6.0-2-g87a656ae5ff9
- Improve overlay error reporting
- Device link support for power-domains and hwlocks bindings
- Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
ITE Tech
- Add deprecated Marvell vendor prefix 'mrvl'
- A bunch of binding conversions to DT schema continues. Of note, the
common serial and USB connector bindings are converted.
- Add more Arm CPU compatibles
- Drop Mark Rutland as DT maintainer :(
-----BEGIN PGP SIGNATURE-----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=db/l
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Unit test for overlays with GPIO hogs
- Improve dma-ranges parsing to handle dma-ranges with multiple entries
- Update dtc to upstream version v1.6.0-2-g87a656ae5ff9
- Improve overlay error reporting
- Device link support for power-domains and hwlocks bindings
- Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
ITE Tech
- Add deprecated Marvell vendor prefix 'mrvl'
- A bunch of binding conversions to DT schema continues. Of note, the
common serial and USB connector bindings are converted.
- Add more Arm CPU compatibles
- Drop Mark Rutland as DT maintainer :(
* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
MAINTAINERS: drop an old reference to stm32 pwm timers doc
MAINTAINERS: dt: update etnaviv file reference
dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
dt-bindings: uniphier-system-bus: fix warning in the example
dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
dt-bindings: power: Fix example for power-domain
dt-bindings: arm: Add some constraints for PSCI nodes
of: some unittest overlays not untracked
of: gpio unittest kfree() wrong object
dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
dt-bindings: serial: sh-sci: Convert to json-schema
dt-bindings: serial: Document serialN aliases
dt-bindings: thermal: tsens: Set 'additionalProperties: false'
dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
dt-bindings: vendor-prefixes: Add Beacon vendor prefix
dt-bindings: vendor-prefixes: Add Topwise
of: of_private.h: Replace zero-length array with flexible-array member
docs: dt: fix a broken reference to input.yaml
docs: dt: fix references to ap806-system-controller.txt
...
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.
So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
Convert ROHM bd71837 and bd71847 PMIC binding text docs to yaml. Split
the binding document to two separate documents (own documents for BD71837
and BD71847) as they have different amount of regulators. This way we can
better enforce the node name check for regulators. ROHM is also providing
BD71850 - which is almost identical to BD71847 - main difference is some
initial regulator states. The BD71850 can be driven by same driver and it
has same buck/LDO setup as BD71847 - add it to BD71847 binding document and
introduce compatible for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Numerous schemas are missing 'additionalProperties: false' statements which
ensures a binding doesn't have any extra undocumented properties or child
nodes. Fixing this reveals various missing properties, so let's fix all
those occurrences.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: netdev@vger.kernel.org
Cc: Guillaume La Roque <glaroque@baylibre.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-clk@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-media@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
The pmi8994 is commonly found on MSM8996 based devices, such as the
Dragonboard 820c, where it supplies power to a number of LDOs on the
primary PMIC.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324041424.518160-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MP8867 is an I2C-controlled adjustable voltage regulator made by
Monolithic Power Systems. The difference between MP8867 and MP8869
are:
1.If V_BOOT, the vref of MP8869 is fixed at 600mv while vref of MP8867
is determined by the I2C control.
2.For MP8867, when setting voltage, if the steps is within 5, we need
to manually set the GO_BIT to 0.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200316223100.37805b22@xhacker
Signed-off-by: Mark Brown <broonie@kernel.org>
The MP8869 from Monolithic Power Systems is a single output dc/dc
converter with voltage control over i2c.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200316222945.74ad34dd@xhacker
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fixes for warnings introduced by hierarchical PSCI binding changes
- Fixes for broken doc references due to DT schema conversions
- Several grammar and typo fixes
- Fix a bunch of dtc warnings in examples
-----BEGIN PGP SIGNATURE-----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=sbhb
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another batch of DT fixes. I think this should be the last of it, but
sending pull requests seems to cause people to send more fixes.
Summary:
- Fixes for warnings introduced by hierarchical PSCI binding changes
- Fixes for broken doc references due to DT schema conversions
- Several grammar and typo fixes
- Fix a bunch of dtc warnings in examples"
* tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states
dt-bindings: power: Extend nodename pattern for power-domain providers
MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry
dt-bindings: bus: Drop empty compatible string in example
dt-bindings: power: Convert domain-idle-states bindings to json-schema
dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI
dt-bindings: arm: Correct links to idle states definitions
dt-bindings: mfd: Fix typo in file name of twl-familly.txt
dt-bindings: mfd: tps65910: Improve grammar
dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")
dt-bindings: arm: fsl: fix APF6Dev compatible
dt-bindings: Fix dtc warnings in examples
docs: dt: fix several broken doc references
docs: dt: fix several broken references due to renames
MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX
This patch adds bindings for the Qualcomm IPQ4019 VQMMC SD LDO driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Message-Id: <20200122134023.1467806-1-robert.marko@sartura.hr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add device tree binding information for mp5416 regulator driver.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200204110419.25933-2-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200123215338.11109-1-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit f5fa59a61e "regulator: bindings: add
document bindings for mpq7920" as Rob has a number of problems
with the use of DT schema.
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20200108131234.24128-3-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MP8859 from Monolithic Power Systems is a single output dc/dc converter
with voltage control over i2c.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20200106211633.2882-5-m.reichl@fivetechno.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the stm32-pwr regulator binding to DT schema format using
json-schema.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191205161359.20755-1-p.paillet@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
