Large part of bio.h, blkdev.h and genhd.h are under ifdef CONFIG_BLOCK
for no good reason. Only stub out function that are called from
code that is not dependent on CONFIG_BLOCK and leave the harmless
other declarations around.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the !CONFIG_BLOCK stub to the same place as the non-stub
declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move most of the block related definition out of fs.h into more suitable
headers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use IS_ENABLED instead of providing a stub for !CONFIG_BLOCK.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No one calls these functions without CONFIG_BLOCK, so don't bother
stubbing them out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are not defined anywhere, and contrary to the comments we really
do not care about out of tree code at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can also thaw non-block file systems. Remove the CONFIG_BLOCK in
sysrq.c after making the prototype available unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Revert and incorret transformation that caused requests using remote
invalidation to never complete.
Fixes: 421147be863b ("nvme-rdma: factor out a nvme_rdma_end_request helper")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.
Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.
This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.
blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.
debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On commit 6ac93117ab ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
[ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 252.436592] #PF: supervisor write access in kernel mode
[ 252.439822] #PF: error_code(0x0002) - not-present page
[ 252.442967] PGD 0 P4D 0
[ 252.444656] Oops: 0002 [#1] SMP NOPTI
[ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 252.456343] RIP: 0010:down_write+0x15/0x40
[ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 252.479866] Call Trace:
[ 252.480322] simple_recursive_removal+0x4e/0x2e0
[ 252.481078] ? debugfs_remove+0x60/0x60
[ 252.481725] ? relay_destroy_buf+0x77/0xb0
[ 252.482662] debugfs_remove+0x40/0x60
[ 252.483518] blk_remove_buf_file_callback+0x5/0x10
[ 252.484328] relay_close_buf+0x2e/0x60
[ 252.484930] relay_open+0x1ce/0x2c0
[ 252.485520] do_blk_trace_setup+0x14f/0x2b0
[ 252.486187] __blk_trace_setup+0x54/0xb0
[ 252.486803] blk_trace_ioctl+0x90/0x140
[ 252.487423] ? do_sys_openat2+0x1ab/0x2d0
[ 252.488053] blkdev_ioctl+0x4d/0x260
[ 252.488636] block_ioctl+0x39/0x40
[ 252.489139] ksys_ioctl+0x87/0xc0
[ 252.489675] __x64_sys_ioctl+0x16/0x20
[ 252.490380] do_syscall_64+0x52/0x180
[ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9
And the other on the device removal:
[ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 128.619537] #PF: supervisor write access in kernel mode
[ 128.622700] #PF: error_code(0x0002) - not-present page
[ 128.625842] PGD 0 P4D 0
[ 128.627585] Oops: 0002 [#1] SMP NOPTI
[ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 128.640471] RIP: 0010:down_write+0x15/0x40
[ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.667282] Call Trace:
[ 128.667801] simple_recursive_removal+0x4e/0x2e0
[ 128.668663] ? debugfs_remove+0x60/0x60
[ 128.669368] debugfs_remove+0x40/0x60
[ 128.669985] blk_trace_free+0xd/0x50
[ 128.670593] __blk_trace_remove+0x27/0x40
[ 128.671274] blk_trace_shutdown+0x30/0x40
[ 128.671935] blk_release_queue+0x95/0xf0
[ 128.672589] kobject_put+0xa5/0x1b0
[ 128.673188] disk_release+0xa2/0xc0
[ 128.673786] device_release+0x28/0x80
[ 128.674376] kobject_put+0xa5/0x1b0
[ 128.674915] loop_remove+0x39/0x50 [loop]
[ 128.675511] loop_control_ioctl+0x113/0x130 [loop]
[ 128.676199] ksys_ioctl+0x87/0xc0
[ 128.676708] __x64_sys_ioctl+0x16/0x20
[ 128.677274] do_syscall_64+0x52/0x180
[ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The common theme here is:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure it is clear which lock is required on do_blk_trace_setup().
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit dc9edc44de ("block: Fix a blk_exit_rl() regression") merged on
v4.12 moved the work behind blk_release_queue() into a workqueue after a
splat floated around which indicated some work on blk_release_queue()
could sleep in blk_exit_rl(). This splat would be possible when a driver
called blk_put_queue() or blk_cleanup_queue() (which calls blk_put_queue()
as its final call) from an atomic context.
blk_put_queue() decrements the refcount for the request_queue kobject, and
upon reaching 0 blk_release_queue() is called. Although blk_exit_rl() is
now removed through commit db6d995235 ("block: remove request_list code")
on v5.0, we reserve the right to be able to sleep within
blk_release_queue() context.
The last reference for the request_queue must not be called from atomic
context. *When* the last reference to the request_queue reaches 0 varies,
and so let's take the opportunity to document when that is expected to
happen and also document the context of the related calls as best as
possible so we can avoid future issues, and with the hopes that the
synchronous request_queue removal sticks.
We revert back to synchronous request_queue removal because asynchronous
removal creates a regression with expected userspace interaction with
several drivers. An example is when removing the loopback driver, one
uses ioctls from userspace to do so, but upon return and if successful,
one expects the device to be removed. Likewise if one races to add another
device the new one may not be added as it is still being removed. This was
expected behavior before and it now fails as the device is still present
and busy still. Moving to asynchronous request_queue removal could have
broken many scripts which relied on the removal to have been completed if
there was no error. Document this expectation as well so that this
doesn't regress userspace again.
Using asynchronous request_queue removal however has helped us find
other bugs. In the future we can test what could break with this
arrangement by enabling CONFIG_DEBUG_KOBJECT_RELEASE.
While at it, update the docs with the context expectations for the
request_queue / gendisk refcount decrement, and make these
expectations explicit by using might_sleep().
Fixes: dc9edc44de ("block: Fix a blk_exit_rl() regression")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let us clarify the context under which the helpers to increment the
refcount for the gendisk and request_queue can be called under. We
make this explicit on the places where we may sleep with might_sleep().
We don't address the decrement context yet, as that needs some extra
work and fixes, but will be addressed in the next patch.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds documentation for the gendisk / request_queue refcount
helpers.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_mq_complete_request_remote helper to avoid an indirect
function call in the completion fast path.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor a small sniplet of duplicated code into a new helper in
preparation for making this sniplet a little bit less trivial.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a variant of blk_mq_complete_request_remote that only completes
the request if it needs to be bounced to another CPU or a softirq. If
the request can be completed locally the function returns false and lets
the driver complete it without requring and indirect function call.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to decide if we can complete locally or need an IPI.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really care if we get migrated during the I/O completion.
In the worth case we either perform an IPI that wasn't required, or
complete the request on a CPU which we just migrated off.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both the softirq path for single queue devices and the multi-queue
completion handler share the same logic to figure out if we need an
IPI for the completion and eventually issue it. Merge the two
versions into a single unified code path.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let the compile optimize out the entire IPI path, given that we are
obviously not going to use it.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even for single queue devices there is no point in offloading a polled
completion to the softirq, given that blk_mq_force_complete_rq is called
from the polling thread in that case and thus there are no starvation
issues.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By open coding raise_blk_irq in the only caller, and replacing the
ifdef CONFIG_SMP with an IS_ENABLED check the flow in the caller
can be significantly simplified.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to deduplicate the logic that raises the block softirq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_complete_request is only called from the blk-mq code, and
duplicates a lot of code from blk-mq.c. Move it there to prepare
for better code sharing and simplifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=nILH
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
clang.
Two patches fix potential double-free conditions and one fixes an
undefined return value"
* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix undefined return of cond_evaluate_expr
selinux: fix a double free in cond_read_node()/cond_read_list()
selinux: fix double free
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct.
- Use the noirq variants of the suspend and resume callbacks in
the Tegra driver.
- Clean up the errorpath on the MCP23s08 driver.
- Revert the use of devm_of_iomap() in the Freescale driver as
it was regressing the platform.
- Add some missing pins in the Qualcomm IPQ6018 driver.
- Fix a simple documentation bug in the pinctrl-single driver.
-----BEGIN PGP SIGNATURE-----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=g/Xm
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
window, all pretty self-evident, with the details below. The revert is
the crucial thing.
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct
- Use the noirq variants of the suspend and resume callbacks in the
Tegra driver
- Clean up the errorpath on the MCP23s08 driver
- Revert the use of devm_of_iomap() in the Freescale driver as it was
regressing the platform
- Add some missing pins in the Qualcomm IPQ6018 driver
- Fix a simple documentation bug in the pinctrl-single driver"
* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: single: fix function name in documentation
pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
pinctrl: tegra: Use noirq suspend/resume callbacks
pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable compile
option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
-----BEGIN PGP SIGNATURE-----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=IAng
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit e0b250b57d,
which broke build systems that need to install files to a certain
path, but do not set INSTALL_MOD_PATH when invoking 'make install'.
$ make INSTALL_PATH=/tmp/destdir install
mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied
Makefile:1342: recipe for target '_builtin_inst_' failed
make: *** [_builtin_inst_] Error 1
While modules.builtin is useful also for CONFIG_MODULES=n, this change
in the behavior is quite unexpected. Maybe "make modules_install"
can install modules.builtin irrespective of CONFIG_MODULES as Jonas
originally suggested.
Anyway, that commit should be reverted ASAP.
Reported-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a regression fix for cc97923a5b
("block: move dma drain handling to scsi")
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXu5JliYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcWzAP0SdVNo
4pWvdzaqxBqdoe0UlKygfyDUI2/d2682v9qcsgEA1mfpI6NHbmwAftO63t6kF+ll
PPNnsJKcjYph5MrJzkk=
=+54z
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a 5.7 regression fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
scsi: ufs-bsg: Fix runtime PM imbalance on error
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
Use the correct the function name in the documentation for
"pcs_parse_one_pinctrl_entry()".
"smux_parse_one_pinctrl_entry()" appears to be an artifact from the
development of a prior patch series ("simple pinmux driver") which
transformed into pinctrl-single.
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
- Fix the visibility of the region 'align' attribute. The new unit tests
for region alignment handling caught a corner case where the alignment
cannot be specified if the region is converted from static to dynamic
provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver. This includes both the standard
sysfs "health flags" that the nfit persistent memory driver publishes
and a mechanism for the ndctl tool to retrieve a health-command payload.
-----BEGIN PGP SIGNATURE-----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=qVy4
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
visibility) for v5.8.
Vaibhav explains in the merge commit below why missing v5.8 would be
painful and I agreed to try a -rc2 pull because only cosmetics kept
this out of -rc1 and his initial versions were posted in more than
enough time for v5.8 consideration:
'These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose
time-lines are tied to 5.8 kernel release.
Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels
by at least 6 months'
Summary:
- Fix the visibility of the region 'align' attribute.
The new unit tests for region alignment handling caught a corner
case where the alignment cannot be specified if the region is
converted from static to dynamic provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver.
This includes both the standard sysfs "health flags" that the nfit
persistent memory driver publishes and a mechanism for the ndctl
tool to retrieve a health-command payload"
* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/region: always show the 'align' attribute
powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
powerpc/papr_scm: Fetch nvdimm health information from PHYP
seq_buf: Export seq_buf_printf
powerpc: Document details on H_SCM_HEALTH hcall
The patch adds missing qpic data pins to qpic pingroup. These pins are
necessary for the qpic nand to work.
Fixes: ef1ea54eab ("pinctrl: qcom: Add ipq6018 pinctrl driver")
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit ba40324261.
After commit 26d8cde526 ("pinctrl: freescale: imx: add shared
input select reg support"). i.MX7D has two iomux controllers
iomuxc and iomuxc-lpsr which share select_input register for
daisy chain settings.
If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call
devm_request_mem_region() for the region <0x30330000-0x3033ffff>
for the first time. Then, next time when probe the iomuxc, API
devm_platform_ioremap_resource() will also use the API
devm_request_mem_region() for the share region <0x30330000-0x3033ffff>
again, then cause issue, log like below:
[ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver
[ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff]
[ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16
Fixes: ba40324261 ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This contains three fixes that I'd like to target for rc2:
* A workaround for a compiler surprise related to the "r" inline assembly that
allows LLVM to boot.
* A fix to avoid WX-only mappings, which the ISA does not allow. While this
probably manifests in many ways, the bug was found in stress-ng.
* A missing lock in set_direct_map_*(), which due to a recent lockdep change
started asserting.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl7tRxkTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiaJZD/9hzS6fxNlcLaLyBLLroWLlWnwGAi7r
T3hTyNVo3EG/hHw0NGEWzqVuqjnuo0MAHDlTfkD7SuuBtj2PtZHVdX5JA9QsJF1j
KF3hz14GbbGuzOWlt6m+6KMU4r9+qX+0L3aqu0ShXVZhsHjKyuYTSHlwIRLzCzlQ
jcCVnrIQtq0pAcGylmL5s/9kVFGrpE6m1+Xm+mpPbgQCbqFMYCBVx8sb2EnEPv/X
TzgCzS8sjRG0FYIrquwxuHtKg+AlgmmaQw96fWOq9R4mJtNvcDFbaTT5MEqQYP6B
kljNf3DAdKG0QqKCtNC5BvgE+45BpQ67ZIUypG00Y0zViY2ZOjNGqGi7kzzIqOWG
IwwB6Gcb6CJnOWRJ2OlkDDdOe1VOvrE/ap+WEYE8Fb/TRQhdOjcHMzd9d/0JXe9R
XySr5gtpppKABJjBWmzGfqLRXby7qQFXR4BqnpPGuqR1Z0l5MaihN2mlpOZrDbMS
Y0j1vQuINBkoBqXBfqxCZb5gvwxHI+5lwFNy8chw8JZTOuvLYJ0s5bK8AF9fAGk8
7NCv+JCt2mrjMLRoZw7EFu4wqBTjjDXKP5AiiKHOCG9y4lokqLdATWirlWwScTt0
TvikaMYsDdiuhRpg0D0YCKGzQ9Cl23XvGe9fm6Ajhhkn6lONJD0/V/1i0MfY0+Nm
7TI46cNfvsUsWw==
=ZAlD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a workaround for a compiler surprise related to the "r" inline
assembly that allows LLVM to boot.
- a fix to avoid WX-only mappings, which the ISA does not allow. While
this probably manifests in many ways, the bug was found in stress-ng.
- a missing lock in set_direct_map_*(), which due to a recent lockdep
change started asserting.
* tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Acquire mmap lock before invoking walk_page_range
RISC-V: Don't allow write+exec only page mapping request in mmap
riscv/atomic: Fix sign extension for RV64I
This Kselftest update for Linux 5.8-rc2 consists of:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
-----BEGIN PGP SIGNATURE-----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=nqUq
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest cleanups from Shuah Khan:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Support ":README" suffix for requires
selftests/ftrace: Support ":tracer" suffix for requires
selftests/ftrace: Convert check_filter_file() with requires list
selftests/ftrace: Convert required interface checks into requires list
selftests/ftrace: Add "requires:" list support
selftests/ftrace: Return unsupported for the unconfigured features
selftests/ftrace: Allow ":" in description
tools: testing: ftrace: trigger: fix spelling mistake