This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.
With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp, gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean, mostly
dropping unnecessary calls to platform_set_drvdata() and removing error
messages where none are needed (handled by the subsystem already)
- several improvements to the core gpiolib and the sysfs interface code from
Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API + improvements
of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe for
improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=IF0T
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"One new driver, support for new models in existing ones, dt-bindings
conversions for several modules and improvements all over the place.
Summary:
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp,
gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean,
mostly dropping unnecessary calls to platform_set_drvdata() and
removing error messages where none are needed (handled by the
subsystem already)
- several improvements to the core gpiolib and the sysfs interface
code from Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API +
improvements of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe
for improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place"
* tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (57 commits)
docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
dt-bindings: gpio: pcf857x: Convert to json-schema
gpio: mxs: Prefer unsigned int to bare use of unsigned
dt-bindings: gpio: stp: convert to json-schema
dt-bindings: gpio: zynq: convert bindings to YAML
dt-bindings: gpio: gpio-davinci: Convert to json-schema
gpio: pca953x: Add support for the On Semi pca9655
gpio: gpio-xilinx: update on suspend and resume calls
gpio: zynq: Check return value of irq_get_irq_data
gpio: zynq: Check return value of pm_runtime_get_sync
gpio: zynq: use module_platform_driver to simplify the code
gpio: idt3243x: Fix return value check in idt_gpio_probe()
MAINTAINERS: update ti,omap-gpio.yaml reference
dt-bindings: gpio: Add devicetree binding for IDT 79RC32434 GPIO controller
gpio: Add support for IDT 79RC3243x GPIO controller
gpio: regmap: move drvdata to config data
gpio-dwapb: Drop unused headers and sort the rest
gpio: gpio-regmap: Use devm_add_action_or_reset()
gpio: dwapb: Switch to use fwnode_irq_get()
gpio: dwapb: Drop redundant check in dwapb_irq_set_type()
...
Highlights:
- New think-lmi driver adding support for changing BIOS settings from
within Linux using the standard firmware-attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function
Note this also contains merges of the following immutable branches/tags
shared with other subsystems:
- platform-drivers-x86-goodix-v5.14-1
- intel-gpio-v5.14-1
- linux-pm/acpi-scan
- devm-helpers-v5.14-1
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: initialize local variable to avoid garbage being returned
- scan: Add function to fetch dependent of ACPI device
- scan: Extend acpi_walk_dep_device_list()
- scan: Rearrange dep_unmet initialization
Add intel_skl_int3472 driver:
- Add intel_skl_int3472 driver
ISST:
- Use numa node id for cpu pci dev mapping
- Optimize CPU to PCI device mapping
Input:
- goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
MAINTAINERS:
- Update IRC link for Surface System Aggregator subsystem
- Update info for telemetry
Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans
Merge tag 'devm-helpers-v5.14-1' into review-hans:
- Merge tag 'devm-helpers-v5.14-1' into review-hans
Merge tag 'intel-gpio-v5.14-1' into review-hans:
- Merge tag 'intel-gpio-v5.14-1' into review-hans
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans:
- Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Remove "default n" entries:
- Remove "default n" entries
Rename hp-wireless to wireless-hotkey:
- Rename hp-wireless to wireless-hotkey
asus-nb-wmi:
- Revert "add support for ASUS ROG Zephyrus G14 and G15"
- Revert "Drop duplicate DMI quirk structures"
dcdbas:
- drop unneeded assignment in host_control_smi()
dell-privacy:
- Add support for Dell hardware privacy
dell-wmi:
- Rename dell-wmi.c to dell-wmi-base.c
dell-wmi-sysman:
- Change user experience when Admin/System Password is modified
- fw_attr_inuse can be static
- Use firmware_attributes_class helper
- Make populate_foo_data functions more robust
dell-wmi-sysman/think-lmi:
- Make fw_attr_class global static
devm-helpers:
- Add resource managed version of work init
docs:
- driver-api: Update Surface Aggregator user-space interface documentation
extcon:
- extcon-max8997: Simplify driver using devm
- extcon-max8997: Fix IRQ freeing at error path
- extcon-max77693.c: Fix potential work-queue cancellation race
- extcon-max14577: Fix potential work-queue cancellation race
firmware_attributes_class:
- Create helper file for handling firmware-attributes class registration events
gpio:
- wcove: Split error handling for CTRL and IRQ registers
- wcove: Unify style of to_reg() with to_ireg()
- wcove: Use IRQ hardware number getter instead of direct access
- crystalcove: remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
hdaps:
- Constify static attribute_group struct
ideapad-laptop:
- Ignore VPC event bit 10
intel_cht_int33fe:
- Move to its own subfolder
- Correct "displayport" fwnode reference
intel_ips:
- fix set but unused warning in read_mgtv
intel_pmt_crashlog:
- Constify static attribute_group struct
intel_skl_int3472:
- Uninitialized variable in skl_int3472_handle_gpio_resources()
- Move to intel/ subfolder
- Provide skl_int3472_unregister_clock()
- Provide skl_int3472_unregister_regulator()
- Use ACPI GPIO resource directly
- Fix dependencies (drop CLKDEV_LOOKUP)
- Free ACPI device resources after use
mfd:
- tps68470: Remove tps68470 MFD driver
platform/mellanox:
- mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"
platform/surface:
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_packet_layer.c
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_request_layer.c
- aggregator: Drop unnecessary variable initialization
- aggregator: Do not return uninitialized value
- aggregator_cdev: Add lockdep support
- aggregator_cdev: Allow enabling of events from user-space
- aggregator_cdev: Add support for forwarding events to user-space
- aggregator: Update copyright
- aggregator: Allow enabling of events without notifiers
- aggregator: Allow registering notifiers without enabling events
- dtx: Add missing mutex_destroy() call in failure path
- aggregator: Fix event disable function
- aggregator_registry: Consolidate node groups for 5th- and 6th-gen devices
- aggregator_registry: Add support for 13" Intel Surface Laptop 4
- aggregator_registry: Update comments for 15" AMD Surface Laptop 4
samsung-laptop:
- set debugfs blobs to read only
- use octal numbers for rwx file permissions
tc1100-wmi:
- Constify static attribute_group struct
think-lmi:
- Move kfree(setting->possible_values) to tlmi_attr_setting_release()
- Split current_value to reflect only the value
- Fix issues with duplicate attributes
- Return EINVAL when kbdlang gets set to a 0 length string
- Add missing MODULE_DEVICE_TABLE
- Avoid potential read before start of the buffer
- Fix check for admin password being set
- Add WMI interface support on Lenovo platforms
thinkpad-lmi:
- Remove unused display_name member from struct tlmi_pwd_setting
thinkpad_acpi:
- Add X1 Carbon Gen 9 second fan support
- Fix inconsistent indenting
tools/power/x86/intel-speed-select:
- v1.10 release
- Fix uncore memory frequency display
toshiba_acpi:
- Fix missing error code in toshiba_acpi_setup_keyboard()
toshiba_haps:
- Fix missing newline in pr_debug call in toshiba_haps_notify
touchscreen_dmi:
- Fix Chuwi Hi10 Pro comment
- Add info for the Goodix GT912 panel of TM800A550L tablets
- Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
x86/platform/uv:
- Constify static attribute_group struct
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmDbELwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yp2wgAj1mTOJi/4Rx1g8wXLpP/hflEkFMU
yyMeKe3LOEzuo/LZUfW4tqWiXa4aTgN6rUOF8KUumsIor/72hKcczuPVY+qCqF7V
qYZ0vMG93DfAyVPQvBrNjHMXiVevD/gMFRqJEOOgXt96B6Zea4vh1pBvLACAHFZ0
bjkZDX3cO89TSfUF7uhiU9UkMvMMAVs34Knc1Pe4QnZ16e2kPGcKip3qb73yT+xC
8NVRgE6fdSIJfDAVzqpdh91rfDdzHDJ6vT10uijOTkriJciN07UKtYuK5StCpAo5
sXIQllHySHRHj5N0IWZ04w6RMQ+l/9CaHDttkYWW3fV1EU9SVzvp/+d6zA==
=tAuE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
Both of these drivers use ioport_map(), so they need to
depend on HAS_IOPORT_MAP. Otherwise, they cannot be built
even with COMPILE_TEST on architectures without an ioport
implementation, such as ARCH=um.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This driver only covered one scenario in which ACPI devices with _HID
INT3472 are found, and its functionality has been taken over by the
intel-skl-int3472 module, so remove it.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-7-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
IDT 79RC3243x SoCs integrated a gpio controller, which handles up
to 32 gpios. All gpios could be used as an interrupt source.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces instead of
reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
-----BEGIN PGP SIGNATURE-----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=5vLN
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces
instead of reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
dt-bindings: gpio: add YAML description for rockchip,gpio-bank
gpio: mxs: remove useless function
dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
gpio: it87: remove unused code
gpio: 104-dio-48e: Fix coding style issues
gpio: mpc8xxx: Add ACPI support
gpio: ich: Switch to be dependent on LPC_ICH
gpio: sch: Drop MFD_CORE selection
gpio: sch: depends on LPC_SCH
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
gpio: sch: Add edge event support
gpio: aggregator: Replace custom get_arg() with a generic next_arg()
lib/cmdline: Export next_arg() for being used in modules
gpio: omap: Use device_get_match_data() helper
gpio: Add Realtek Otto GPIO support
dt-bindings: gpio: Binding for Realtek Otto GPIO
docs: kernel-parameters: Add gpio_mockup_named_lines
docs: kernel-parameters: Move gpio-mockup for alphabetic order
lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
...
Driver is neither dependent to PCI nor using MFD_CORE.
Replace those dependency and selection by dependency on LPC_ICH.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since we are depended on LPC_SCH, which selects MFD_CORE,
we don't need to do it ourselves.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on
LPC_SCH to prevent kconfig warning and build errors:
WARNING: unmet direct dependencies detected for LPC_SCH
Depends on [n]: HAS_IOMEM [=y] && PCI [=n]
Selected by [y]:
- GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y]
and
../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class
module_pci_driver(lpc_sch_driver);
^~~~~~~~~~~~~~~~~
../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration
../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable]
static struct pci_driver lpc_sch_driver = {
^~~~~~~~~~~~~~
Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Neither the ACPI description on Intel Minnowboard (v1) platform provides
the required information to establish a generic handling nor the hardware
capable of doing it. According to the data sheet the hardware can generate
SCI events. Therefore, we need to hook from the driver into GPE handler of
the ACPI subsystem in order to catch and report GPIO-related events.
Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add the required infrastructure to enable and report edge events
of the pins to the GPIO core. The actual hook-up of the event interrupt
will happen separately.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.
Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).
Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).
Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Support GPO(s) found from ROHM BD71815 power management IC. The IC has two
GPO pins but only one is properly documented in the data-sheet. The driver
exposes by default only the documented GPO. The second GPO is connected to
E5 pin and is marked as GND in the data-sheet. Control for this
undocumented pin can be enabled using a special DT property.
This driver is derived from work by Peter Yang <yanglsh@embest-tech.com>
although not so much of the original is left.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Adds interrupt support to the Xilinx GPIO driver so that rising and
falling edge line events can be supported. Since interrupt support is
an optional feature in the Xilinx IP, the driver continues to support
devices which have no interrupt provided.
Depends on OF_GPIO framework for of_xlate function to translate
gpiospec to the GPIO number and flags.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Support building driver as a loadable kernel module. This allows to
reduce size of a kernel zImage, which is important for some devices
since size of kernel partition may be limited and since some bootloader
variants have known problems in regards to the initrd placement if kernel
image is too big.
$ lsmod
Module Size Used by
gpio_tegra 16384 27
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio-mockup doesn't require SYSFS to be selected so drop that bit from
the Kconfig text.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS,
and ask the user in case of compile-testing.
Fixes: 6876ca311b ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the
Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made
the IRQ domain hierarchical, so the driver needs to pull in the support
infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig
options.
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This is the only driver in the kernel source tree that depends on
IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a
visible Kconfig symbol, depending on it (expecting a user to
set/enable it) doesn't make much sense, so change it to select
instead of "depends on".
Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Cc: Thierry Reding <treding@nvidia.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make it clear that ACPI needs to be present only to get driver functional.
It is not required for compilation.
Fixes: 356b01a986 ("gpio: gpio-hisi: Add HiSilicon GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201214165524.43843-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO driver is for HiSilicon's ARM SoC.
HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.
ACPI table example for this GPIO controller:
Device (GPO0)
{
Name (_HID, "HISI0184")
Device (PRTA)
{
Name (_ADR, Zero)
Name (_UID, Zero)
Name (_DSD, Package (0x01)
{
Package (0x02)
{
"ngpios",
0x20
}
})
}
}
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
-----BEGIN PGP SIGNATURE-----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=RmnM
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
Since we already have a few virtual GPIO drivers, and more to come,
this category deserves its own submenu.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.
The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.
The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips
The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.
So far this only supports the MSC313 and MSC313E chips.
Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.
If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.
Also only show this obsolete option to expert users.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
We can simplify the code in gpio-exar by using regmap. This allows us to
drop the mutex (regmap provides its own locking) and we can also reuse
regmap's bit operations instead of implementing our own update function.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a build option to allow the removal of the CDEV v1 ABI.
Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make the gpiolib-cdev module a build option. This allows the CDEV
interface to be removed from the kernel to reduce kernel size in
applications where is it not required, and provides the parent for
other CDEV interface specific build options to follow.
Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Change config to tristate, add module device table, module author,
description and license to support module build for i.MX GPIO driver.
As this is a SoC GPIO module, it provides common functions for most
of the peripheral devices, such as GPIO pins control, secondary
interrupt controller for GPIO pins IRQ etc., without GPIO driver, most
of the peripheral devices will NOT work properly, so GPIO module is
similar with clock, pinctrl driver that should be loaded ONCE and
never unloaded.
Since MXC GPIO driver needs to have init function to register syscore
ops once, here still use subsys_initcall(), NOT module_platform_driver().
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1600320829-1453-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the GPIO controller of the sl28 board management
controller. This driver is part of a multi-function device.
A controller has 8 lines. There are three different flavors:
full-featured GPIO with interrupt support, input-only and output-only.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
GPIO-lib provides a ready-to-use interface to initialize an IRQ-chip on
top of a GPIO chip. It's better from maintainability and readability
point of view to use one instead of supporting a hand-written Generic
IRQ-chip-based implementation. Moreover the new implementation won't
cause much functional overhead but will provide a cleaner driver code.
All of that makes the DW APB GPIO driver conversion pretty much justified
especially seeing a tendency of the other GPIO drivers getting converted
too.
Here is what we do in the framework of this commit to convert the driver
to using the GPIO-lib-based IRQ-chip interface:
1) IRQ ack, mask and unmask callbacks are locally defined instead of
using the Generic IRQ-chip ones.
2) An irq_chip structure instance is embedded into the dwapb_gpio
private data. Note we can't have a static instance of that structure since
GPIO-lib will add some hooks into it by calling gpiochip_set_irq_hooks().
A warning about that would have been printed by the GPIO-lib code if we
used a single irq_chip structure instance for multiple DW APB GPIO
controllers.
3) Initialize the gpio_irq_chip structure embedded into the gpio_chip
descriptor. By default there is no IRQ enabled so any event raised will be
handled by the handle_bad_irq() IRQ flow handler. If DW APB GPIO IP-core
is synthesized to have non-shared reference IRQ-lines, then as before the
hierarchical and cascaded cases are distinguished by checking how many
parental IRQs are defined. (Note irq_set_chained_handler_and_data() won't
initialize IRQs, which descriptors couldn't be found.) If DW APB GPIO IP
is used on a platform with shared IRQ line, then we simply won't let the
GPIO-lib to initialize the parental IRQs, but will handle them locally in
the driver.
4) Discard linear IRQ-domain and Generic IRQ-chip initialization, since
GPIO-lib IRQ-chip interface will create a new domain and accept a standard
IRQ-chip structure pointer based on the setting we provided in the
gpio_irq_chip structure.
5) Manually select a proper IRQ flow handler directly in the
irq_set_type() callback by calling irq_set_handler_locked() method, since
an ordinary (not Generic) irq_chip descriptor is now utilized. Note this
shalln't give any regression
6) Alter CONFIG_GPIO_DWAPB kernel config to select
CONFIG_GPIOLIB_IRQCHIP instead of CONFIG_GENERIC_IRQ_CHIP.
Note neither 4) nor 5) shall cause a regression of commit 6a2f4b7dad
("gpio: dwapb: use a second irq chip"), since the later isn't properly
used here anyway.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200730152808.2955-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All config options for GPIO drivers are inside a big "if GPIOLIB ...
endif" block, so there is no reason for individual config options to
have expicit dependencies on GPIOLIB. Hence remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are quite a lot simple GPIO controller which are using regmap to
access the hardware. This driver tries to be a base to unify existing
code into one place. This won't cover everything but it should be a good
starting point.
It does not implement its own irq_chip because there is already a
generic one for regmap based devices. Instead, the irq_chip will be
instantiated in the parent driver and its irq domain will be associate
to this driver.
For now it consists of the usual registers, like set (and an optional
clear) data register, an input register and direction registers.
Out-of-the-box, it supports consecutive register mappings and mappings
where the registers have gaps between them with a linear mapping between
GPIO offset and bit position. For weirder mappings the user can register
its own .xlate().
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- fix the initialization ordering in gpio-max730x
- make gpio-pxa buildable for compile testing
- make gpio-pca953x buildable as a module
-----BEGIN PGP SIGNATURE-----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=yCpP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.8-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: updates for v5.8 - part 2
- fix the initialization ordering in gpio-max730x
- make gpio-pxa buildable for compile testing
- make gpio-pca953x buildable as a module
Perhaps by some historical reasons the IRQ support has been allowed
only for built-in driver. However, there is nothing prevents us
to build it as module an use as IRQ chip.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add COMPILE_TEST support to the PXA GPIO driver for better compile
testing coverage.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
