Remove the tty_vhangup() from the pty code and just release the
redirect. The tty_vhangup() results in data loss and data out of order
issues.
If you write to a pty master an immediately close the pty master, the
receiver might get a chunk of data dropped, but then receive some later
data. That's obviously something rather unexpected for a user. It
certainly confused my test program.
It turns out that tty_vhangup() on the slave pty gets called from
pty_close(), and that causes the data on the slave side to be flushed,
but due to races more data can be copied into the slave side's buffer
after that. Consider the following sequence:
thread1 thread2 thread3
------- ------- -------
| |-write data into buffer,
| | n_tty buffer is filled
| | along with other buffers
| |-pty_close(master)
| |--tty_vhangup(slave)
| |---tty_ldisc_hangup()
| |----n_tty_flush_buffer()
| |-----reset_buffer_flags()
|-n_tty_read() |
|--up_read(&tty->termios_rwsem);
| |------down_read(&tty->termios_rwsem)
| |------clear n_tty buffer contents
| |------up_read(&tty->termios_rwsem)
|--tty_buffer_flush_work() |
|--schedules work calling |
| flush_to_ldisc() |
| |-flush_to_ldisc()
| |--receive_buf()
| |---tty_port_default_receive_buf()
| |----tty_ldisc_receive_buf()
| |-----n_tty_receive_buf2()
| |------n_tty_receive_buf_common()
| |-------down_read(&tty->termios_rwsem)
| |-------__receive_buf()
| | copies data into n_tty buffer
| |-------up_read(&tty->termios_rwsem)
|--down_read(&tty->termios_rwsem)
|--copy buffer data to user
>From this sequence, you can see that thread2 writes to the buffer then
only clears the part of the buffer in n_tty. The n_tty receive buffer
code then copies more data into the n_tty buffer.
But part of the vhangup, releasing the redirect, is still required to
avoid issues with consoles running on pty slaves. So do that.
As far as I can tell, that is all that should be required.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-3-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will be required by the pty code when it removes tty_vhangup() on
master close.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-2-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The transmission complete error message provides the status of the
ISR_USART_TC bit. This bit, when set, indicates that the transmission
has not been completed.
The bit status indication is not a very understandable information.
The error message sent on console should indicate that the transmission is
not complete, instead of providing USART_TC bit status.
Update the error message and add a comment for better understanding.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean probe and remove port deinit by moving clk_disable_unprepare in a
new dedicated deinit_port function.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment for conflicting RTS/CTS config refers to "st, hw-flow-ctrl",
but this property is deprecated since the generic RTS/CTS property has
been introduced by the patch 'serial: stm32: Use generic DT binding for
announcing RTS/CTS lines'.
Update the comment to refer to both generic and deprecated RTS/CTS
properties.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update rts-gpios and cts-gpios:
- remove max-items as already defined in serial.yaml
- add a note describing rts-gpios and cts-gpios usage with stm32
Document the use of cts-gpios and rts-gpios for flow control in STM32 UART
controller. These properties can be used instead of 'uart-has-rtscts' or
'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
control instead of dedicated pins.
It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or
'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-6-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds the prefix "_usart" in the name of stm32 usart functions in order to
ease the usage of kernel trace and tools, such as f-trace.
Allows to trace "stm32_usart_*" functions with f-trace. Without this patch,
all the driver functions needs to be added manually in f-trace filter.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch --strict warnings and checks:
- checkpatch --strict "Unnecessary parentheses"
- checkpatch --strict "Blank lines aren't necessary before a close brace
- checkpatch --strict "Alignment should match open parenthesis"
- checkpatch --strict "Please don't use multiple blank lines"
- checkpatch --strict "Comparison to NULL could be written ..."
- visual check code ordering warning
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA initialization error handling is not properly implemented in the
driver.
Fix DMA initialization error handling by:
- moving TX DMA descriptor request error handling in a new dedicated
fallback_err label
- adding error handling to TX DMA descriptor submission
- adding error handling to RX DMA descriptor submission
This patch depends on '24832ca3ee85 ("tty: serial: stm32-usart: Remove set
but unused 'cookie' variables")' which unfortunately doesn't include a
"Fixes" tag.
Fixes: 3489187204 ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main purpose of tty_port::low_latency was removed in commit
a9c3f68f3c (tty: Fix low_latency BUG) back in 2014. It was left in
place for drivers as an optional tune knob. But only one driver has been
using it until the previous commit. So remove this misconcept
completely, given there are no users.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the only in-kernel user of tty_port::low_latency. Switch this
last one to test uport->flags directly as tty_port::low_latency is going
away in the next patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BROKEN_GRAPHICS_PROGRAMS is defined when CONFIG_VGA_CONSOLE=y. And
vgacon.c is built exclusively in that case too. So the check for
BROKEN_GRAPHICS_PROGRAMS is pointless in vgacon.c as it is always true.
So remove the test and BROKEN_GRAPHICS_PROGRAMS completely.
This also eliminates the need for vga_font_is_default global as it is
only set and never read.
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop support for these ioctls:
* PIO_FONT, PIO_FONTX
* GIO_FONT, GIO_FONTX
* PIO_FONTRESET
As was demonstrated by commit 90bfdeef83 (tty: make FONTX ioctl use
the tty pointer they were actually passed), these ioctls are not used
from userspace, as:
1) they used to be broken (set up font on current console, not the open
one) and racy (before the commit above)
2) KDFONTOP ioctl is used for years instead
Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set
on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes
PIO_FONTRESET just return an error.
We are removing KD_FONT_FLAG_OLD here as it was used only by these
removed ioctls. kd.h header exists both in kernel and uapi headers, so
we can remove the kernel one completely. Everyone includeing kd.h will
now automatically get the uapi one.
There are now unused definitions of the ioctl numbers and "struct
consolefontdesc" in kd.h, but as it is a uapi header, I am not touching
these.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The constant 20 makes the font sum computation signed which can lead to
sign extensions and signed wraps. It's not much of a problem as we build
with -fno-strict-overflow. But if we ever decide not to, be ready, so
switch the constant to unsigned.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty->ops->close is always called with a valid tty, so the BUG_ON cannot
trigger.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5ce2087ed0 (Fix default compose table initialization) fixed
unicode table so that the values are not sign extended. The upstream
(kbd package) chose a different approach. They use hexadecimal values.
So use the same, so that the output of loadkeys and our shipped file
correspond more to each other.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loadkeys (from kbd) generates 'unsigned short' instead of 'u_short'
since 2.0.3. It also marks maps as 'static' for longer than kbd's
history.
So adapt the shipped defkeymap.c to conform more to loadkeys output.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the last extern user of the tasklet (set_leds) is in
keyboard.c, we can make keyboard_tasklet local to this unit too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_leds and compute_shiftstate are called from a single place in vt.c.
Let's combine these two into vt_set_leds_compute_shiftstate. This allows
for making keyboard_tasklet local in the next patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201223141438.889-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to use xmon with powerpc 8xx, the serial driver
must provide udbg_putc() and udpb_getc().
Provide them via cpm_put_poll_char() and cpm_get_poll_char().
This requires CONFIG_CONSOLE_POLL.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/e4471bf81089252470efb3eed735d71a5b32adbd.1608716197.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a given struct tty_struct this yields the corresponding statistics
about sent and received characters (and some more) which is needed to
implement an LED trigger for tty devices.
The new function is then used to simplify tty_tiocgicount().
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201218104246.591315-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new function tty_kopen_shared() that yields a struct
tty_struct. The semantic difference to tty_kopen() is that the tty is
expected to be used already. So rename tty_kopen() to
tty_kopen_exclusive() for clearness, adapt the single user and put the
common code in a new static helper function.
tty_kopen_shared is to be used to implement an LED trigger for tty
devices in one of the next patches.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201218104246.591315-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 36e2c7421f ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.
Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d627c..b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.
This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fixes from Herbert Xu:
"Fix a number of autobuild failures due to missing Kconfig
dependencies"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - add CRYPTO_AES to Kconfig dependencies
crypto: keembay - Add dependency on HAS_IOMEM
crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xfnP
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a segfault that occurs when built with Clang"
* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with Clang non-section symbols
and fix a typo in the Kconfig help text.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T0Y6
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
Commit c9a3c4e637 ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 886c812165 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang errors:
drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
}
^
drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
return 0;
^
drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
}
^
3 errors generated.
The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.
Fixes: 886c812165 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 660c486590 ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.
Fix this by inverting the condition.
[bhelgaas: join string to make it greppable]
Fixes: 660c486590 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Commit b9ac0f9dc8 ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:
In non-working case (next-20201211):
0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)
In working case (v5.10-rc7):
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.
Fixes: b9ac0f9dc8 ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes: 110b055b28 ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
cases in ARM machines.
- Fix memory leak when synthesizing SDT probes in 'perf probe'.
- Update kernel header copies related to KVM, epol_pwait. msr-index and
powerpc and s390 syscall tables.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
$ export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0.tar.xz
$ time dm
1 93.01 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 91.44 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 71.37 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 77.85 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 82.02 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 79.45 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 100.21 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 109.75 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 104.64 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 111.43 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 63.21 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 79.47 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 78.22 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 60.05 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 94.07 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-12), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 20.29 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 20.93 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 24.38 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 29.82 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
20 88.47 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 10.0.1 (Red Hat 10.0.1-1.module_el8.3.0+467+cb298d5b)
21 59.02 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201217 releases/gcc-10.2.0-643-g7cbb07d2fc, clang version 10.0.1
22 72.73 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 70.97 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 70.08 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 84.72 debian:experimental : Ok gcc (Debian 10.2.0-17) 10.2.0, Debian clang version 11.0.0-5
26 28.29 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
27 28.93 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
28 28.44 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
29 64.12 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
30 74.82 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
31 24.64 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
32 76.64 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
33 88.97 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
34 89.99 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
35 98.90 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
36 103.78 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
37 107.56 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
38 24.13 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
39 105.80 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
40 89.56 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
41 87.98 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
42 89.55 fedora:rawhide : Ok gcc (GCC) 11.0.0 20201216 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-2.rc1.fc34)
43 33.40 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
44 64.08 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
45 78.93 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
46 94.99 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
47 213.77 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
48 112.96 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
49 118.55 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
50 110.15 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
51 103.45 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
52 103.39 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
53 25.07 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
54 30.23 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
55 105.95 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
56 25.87 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
57 28.69 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
58 72.96 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
59 24.81 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
60 25.59 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
61 25.00 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 24.95 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 25.65 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 24.15 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 85.52 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
66 26.58 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
67 26.53 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
68 21.72 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
69 25.98 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
70 27.59 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 28.30 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 162.30 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 23.53 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 26.32 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 23.70 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 67.90 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
77 26.49 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
78 24.18 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
79 73.64 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
80 29.04 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
81 70.64 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.9.11-100.fc32.x86_64 #1 SMP Tue Nov 24 19:16:53 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
5149303fdf perf probe: Fix memory leak when synthesizing SDT probes
# perf version --build-options
perf version 5.10.g5149303fdfe5
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
libpfm4: [ OFF ] # HAVE_LIBPFM
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip (missing hardware support)
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: Convert perf time to TSC : Ok
71: x86 rdpmc : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Use vfs_getname probe to get syscall args filenames : Ok
78: Check Arm CoreSight trace data recording and synthesized samples: Skip
79: perf stat metrics (shadow stat) test : Ok
80: build id cache operations : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
82: Check open filename arg using perf trace + vfs_getname : Ok
83: Zstd perf.data compression/decompression : Ok
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_with_babeltrace_O: make LIBBABELTRACE=1
make_with_gtk2_O: make GTK2=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_libbpf_O: make NO_LIBBPF=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libnuma_O: make NO_LIBNUMA=1
make_help_O: make help
make_no_auxtrace_O: make NO_AUXTRACE=1
make_with_libpfm4_O: make LIBPFM4=1
make_clean_all_O: make clean all
make_pure_O: make
make_install_prefix_O: make install prefix=/tmp/krava
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_no_newt_O: make NO_NEWT=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_util_map_o_O: make util/map.o
make_no_demangle_O: make NO_DEMANGLE=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_perf_o_O: make perf.o
make_doc_O: make doc
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_gtk2_O: make NO_GTK2=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_slang_O: make NO_SLANG=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_install_bin_O: make install-bin
make_no_sdt_O: make NO_SDT=1
make_no_libperl_O: make NO_LIBPERL=1
make_install_O: make install
make_tags_O: make tags
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_backtrace_O: make NO_BACKTRACE=1
make_debug_O: make DEBUG=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX+TeoQAKCRCyPKLppCJ+
J1+AAP40CjvbDrCN88USIr3s4fUl5MzrxR6cCndqas/l3K3qdAD8CxFUss7dP6sj
i5j1Fae3EsyiRfONcz008WCtMg+jQwo=
=MsgK
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
cases in ARM machines.
- Fix memory leak when synthesizing SDT probes in 'perf probe'.
- Update kernel header copies related to KVM, epol_pwait. msr-index and
powerpc and s390 syscall tables.
* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
perf probe: Fix memory leak when synthesizing SDT probes
perf stat aggregation: Add separate thread member
perf stat aggregation: Add separate core member
perf stat aggregation: Add separate die member
perf stat aggregation: Add separate socket member
perf stat aggregation: Add separate node member
perf stat aggregation: Start using cpu_aggr_id in map
perf cpumap: Drop in cpu_aggr_map struct
perf cpumap: Add new map type for aggregation
perf stat: Replace aggregation ID with a struct
perf cpumap: Add new struct for cpu aggregation
perf cpumap: Use existing allocator to avoid using malloc
perf tests: Improve topology test to check all aggregation types
perf tools: Update s390's syscall.tbl copy from the kernel sources
perf tools: Update powerpc's syscall.tbl copy from the kernel sources
perf s390: Move syscall.tbl check into check-headers.sh
perf powerpc: Move syscall.tbl check to check-headers.sh
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers: Update KVM headers from the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
...
Pull coccinelle updates from Julia Lawall.
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Correct usage of make coccicheck
coccinelle: update expiring email addresses
coccinnelle: Remove ptr_ret script
kbuild: do not use scripts/ld-version.sh for checking spatch version
remove boolinit.cocci
Commit 64a1b95bb9 ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.
However it used:
#ifdef CONFIG_KVM_BOOK3S_64_HV
Which doesn't work when that symbol is =m, leading to a build failure:
ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!
Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.
Fixes: 64a1b95bb9 ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl/jojwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YRO8H/RcOG4KRHkr7r1HKrxVkdJCjmfTnrtwznuOt
vH0R3+31jMCTzJf0iAF+LsI02hrE5HGeVteS4BI8XO/FNFnPg9DJGlbZUQpXk9eT
ZXr5lkChO/+aOZXdAbCySWndrfAkKjMSPSNxuNwYsHiLuNUjIGJy33t3D8KAHQ2k
LxKfCoBRSnGiQcQsHRPageYMBgsDzlW/boHaGGlcnAR/40u5Cm2Pxu8RsPyXgvZd
UPyecC+Rl7aPaqcRAubKeNCmFVdgrbZ/CRr7kyKtslMfHt//ojaQ7pRxUSUlZslZ
z69hET5aXk0bfJ1J0V/3cdU3e9MSTW45rx5Fm8cXg1y1pCP++DA=
=L0re
-----END PGP SIGNATURE-----
Merge tag 'docs-5.11-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small set of late-arriving, small documentation fixes"
* tag 'docs-5.11-2' of git://git.lwn.net/linux:
docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst
Documentation/submitting-patches: Document the SoB chain
Documentation: process: Correct numbering
docs: submitting-patches: Trivial - fix grammatical error
-----BEGIN PGP SIGNATURE-----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=a5OE
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
in the face of io_uring's use of kernel threads.
-----BEGIN PGP SIGNATURE-----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=zXSS
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
* A fix that avoids trying to initialize memory regions outside the
usable range.
-----BEGIN PGP SIGNATURE-----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=CoZ3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
