This reverts commit 7135b921b3.
I applied this commit prematurely while there was still discussion
ongoing. Revert it so the final patch can be applied cleanly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use bpf_jit_binary_pack_alloc in powerpc jit. The jit engine first
writes the program to the rw buffer. When the jit is done, the program
is copied to the final location with bpf_jit_binary_pack_finalize.
With multiple jit_subprogs, bpf_jit_free is called on some subprograms
that haven't got bpf_jit_binary_pack_finalize() yet. Implement custom
bpf_jit_free() like in commit 1d5f82d9dd ("bpf, x86: fix freeing of
not-finalized bpf_prog_pack") to call bpf_jit_binary_pack_finalize(),
if necessary. As bpf_flush_icache() is not needed anymore, remove it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-6-hbathini@linux.ibm.com
powerpc64_jit_data is a misnomer as it is meant for both ppc32 and
ppc64. Rename it to powerpc_jit_data.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-5-hbathini@linux.ibm.com
Implement bpf_arch_text_invalidate and use it to fill unused part of
the bpf_prog_pack with trap instructions when a BPF program is freed.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-4-hbathini@linux.ibm.com
bpf_arch_text_copy is used to dump JITed binary to RX page, allowing
multiple BPF programs to share the same page. Use the newly introduced
patch_instructions() to implement it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-3-hbathini@linux.ibm.com
patch_instruction() entails setting up pte, patching the instruction,
clearing the pte and flushing the tlb. If multiple instructions need
to be patched, every instruction would have to go through the above
drill unnecessarily. Instead, introduce patch_instructions() function
that sets up the pte, clears the pte and flushes the tlb only once
per page range of instructions to be patched. Duplicate most of the
patch_instruction() code instead of merging with it, to avoid the
performance degradation observed on ppc32, for patch_instruction(),
with the code path merged. Also, setup poking_init() always as BPF
expects poking_init() to be setup even when STRICT_KERNEL_RWX is off.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231020141358.643575-2-hbathini@linux.ibm.com
There's a single call to local_flush_tlb_page_psize() in the code
patching code. That call is never executed on 32-bit Book3S,
because it's guarded by mm_patch_enabled() which is essentially a
radix_enabled() check, which is always false on 32s.
However depending on how the optimiser sees things it may still trip
over the BUILD_BUG() in the 32s stub of local_flush_tlb_page_psize().
To avoid that, implement it in terms of flush_range() so that if it ever
becomes called it should function, even if not optimally.
Note that flush_range() deals with page aligning the address and so on,
and that 32s doesn't support huge pages so there should be no issue with
non-standard page sizes needing to be flushed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023092319.1507325-1-mpe@ellerman.id.au
password might contain private information, so better use
kfree_sensitive to free it.
In plpks_gen_password() use kfree_sensitive().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230717092648.9752-1-duminjie@vivo.com
Commit c28c15b6d2 ("powerpc/code-patching: Use temporary mm for
Radix MMU") added a hwsync for when __patch_instruction() fails,
we results in a quite odd unbalanced logic.
Instead of calling mb() when __patch_instruction() returns an error,
call mb() in the __patch_instruction()'s error path directly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e88b154eaf2efd9ff177d472d3411dcdec8ff4f5.1696675567.git.christophe.leroy@csgroup.eu
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231006214516.340589-1-robh@kernel.org
Since commit d3c511ac1d ("powerpc/cpm: Remove
!CONFIG_PPC_CPM_NEW_BINDING code") cpm_dp...() macros have no added
value anymore.
Last user of those macros were fixed by commit 5e6cb39a25 ("net:
fs_enet: Use cpm_muram_xxx() functions instead of cpm_dpxxx() macros")
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3aaa40bf706afeab8fe9a74b8437704a4269a6a2.1697005615.git.christophe.leroy@csgroup.eu
Rename yield_propagate_owner to yield_sleepy_owner, which better
describes what it does (what, not how).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-7-npiggin@gmail.com
The sleepy (aka lock-owner-is-preempted) condition is propagated down
the queue by each waiter. If a waiter becomes preempted, it can no
longer propagate sleepy. To allow subsequent waiters to yield to the
lock owner, also check the lock owner in this case.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-6-npiggin@gmail.com
To simplify things, don't propagate the not-sleepy condition back down
the queue. Instead, have the waiters clear their own node->sleepy when
finding the lock owner is not preempted.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-5-npiggin@gmail.com
Rather than propagating the CPU number of the preempted lock owner,
just propagate whether the owner was preempted. Waiters must read the
lock value when yielding to it to prevent races anyway, so might as
well always load the owner CPU from the lock.
To further simplify the code, also don't propagate the -1 (or
sleepy=false in the new scheme) down the queue. Instead, have the
waiters clear it themselves when finding the lock owner is not
preempted.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-4-npiggin@gmail.com
If a queued waiter notices the lock owner or the previous waiter has
been preempted, it attempts to mark the lock sleepy, but it does this
as a try-set operation using the original lock value it got when
queueing, which will become stale as the queue progresses, and the
try-set will fail. Drop this and just set the sleepy seen clock.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-3-npiggin@gmail.com
When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.
Fixes: 1cade527f6 ("powerpc/perf: BHRB control to disable BHRB logic when not used")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com
When creating a kprobe on function entry through tracefs, enable
arguments to be recorded to be specified using $argN syntax.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230614085926.2176641-1-naveen@kernel.org
Toolchains don't always default to the ELFv2 ABI. This is true with at
least the kernel.org toolchains. As such, pass -mabi=elfv2 explicitly to
ensure that we are testing against the correct compiler output.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
[mpe: Tweak comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230530093821.298590-1-naveen@kernel.org
Rather than replacing the versionless vmlinux and System.map files,
copy to files with the version info appended.
Additionally, since executing the script is a last resort option,
inform the user about the missing `installkernel` command and the
location of the installation.
This work is adapted from `arch/s390/boot/install.sh`, and also matches
the behaviour of arm, arm64 and riscv.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230314164442.124929-1-nnac123@linux.ibm.com
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes: 37e6764895 ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
When a device is initialized, the driver invokes dma_supported() twice -
first for streaming mappings followed by coherent mappings. For an
SR-IOV device, default window is deleted and DDW created. With vPMEM
enabled, TCE mappings are dynamically created for both vPMEM and SR-IOV
device. There are no direct mappings.
First time when dma_supported() is called with 64 bit mask, DDW is created
and marked as dynamic window. The second time dma_supported() is called,
enable_ddw() finds existing window for the device and incorrectly returns
it as "direct mapping".
This only happens when size of DDW is big enough to map max LPAR memory.
This results in streaming TCEs to not get dynamically mapped, since code
incorrently assumes these are already pre-mapped. The adapter initially
comes up but goes down due to EEH.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231003030802.47914-1-gbatra@linux.vnet.ibm.com
PowerVM Hypervisor dispatches on a whole core basis. In a shared LPAR, a
CPU from a core that is CEDED or preempted may have a larger latency. In
such a scenario, its preferable to choose a different CPU to run.
If one of the CPUs in the core is active, i.e neither CEDED nor
preempted, then consider this CPU as not preempted.
Also if any of the CPUs in the core has yielded but OS has not requested
CEDE or CONFER, then consider this CPU to be preempted.
Correct detection of preempted CPUs is important for detecting idle
CPUs/cores in task scheduler.
Tested-by: Aboorva Devarajan <aboorvad@linux.vnet.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019091452.95260-1-srikar@linux.vnet.ibm.com
This patch improves the performance of event alternative lookup by
replacing the previous linear search with a more efficient binary
search. This change reduces the time complexity for the search process
from O(n) to O(log(n)). A pre-sorted table of event values and their
corresponding indices has been introduced to expedite the search
process.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
[mpe: Call the array "presort*ed*_event_table", minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231013175714.2142775-1-visitorckw@gmail.com
A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.
If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[c0000000036afb30] [c00000000013c524] panic+0x178/0x424
[c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
[c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
[c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR: 0000000000000000 <> CR: 00000000 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [0000000000000000] 0x0
LR [0000000000000000] 0x0
--- interrupt: 0
The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[c000000003aabb30] [c00000000014c624] panic+0x178/0x424
[c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
[c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
[c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.
Fixes: 6895dfc047 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
virt_to_phys() doesn't need the address pointer to be mutable.
At the same time allowing it to be mutable leads to the following build
warning for constant pointers:
warning: passing argument 1 of ‘virt_to_phys’ discards ‘const’ qualifier from pointer target type
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/168155747391.13678.10634415747614468991.stgit@skinsburskii.localdomain
Sparse reports an endianness error with the else case of
val = (cpu_endian ? be64_to_cpu(reg_entry->reg_val) :
(u64)(reg_entry->reg_val));
This is a safe operation because the code is explicitly working with
dynamic endianness, so add the __force annotation to tell Sparse to
ignore it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-13-bgray@linux.ibm.com
Sparse reports a warning when casting to an int. There is no need to
cast in the first place, so drop them.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-12-bgray@linux.ibm.com
Sparse reports dereferencing an __iomem pointer. These routines
are clearly low level handlers for IO memory, so force cast away
the __iomem annotation to tell sparse the dereferences are safe.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-11-bgray@linux.ibm.com
Sparse reports dereference of a __user pointer. copy_mc_to_user() takes
a __user pointer, verifies it, then calls the generic copy routine
copy_mc_generic().
As we have verified the pointer, cast out the __user annotation when
passing to copy_mc_generic().
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-10-bgray@linux.ibm.com
Sparse reports several endianness warnings on variables and functions
that are consistently treated as big endian. There are no
multi-endianness shenanigans going on here so fix these low hanging
fruit up in one patch.
All changes are just type annotations; no endianness switching
operations are introduced by this patch.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-7-bgray@linux.ibm.com
Sparse reports several function implementations annotated with extern.
This is clearly incorrect, likely just copied from an actual extern
declaration in another file.
Fix the sparse warnings by removing extern.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-6-bgray@linux.ibm.com
Sparse reports several uses of 0 for pointer arguments and comparisons.
Replace with NULL to better convey the intent. Remove entirely if a
comparison to follow the kernel style of implicit boolean conversions.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-5-bgray@linux.ibm.com
Sparse reports an invalid endian cast here. The code is written for
big endian platforms, so le32_to_cpu() acts as a byte reversal.
This file is checked by sparse on a little endian build though, so
replace the reverse function with the dedicated swab32() function to
better express the intent of the code.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-4-bgray@linux.ibm.com
Introduce PAGE_EXECONLY_X macro which provides exec-only rights.
The _X may be seen as redundant with the EXECONLY but it helps
keep consistency, all macros having the EXEC right have _X.
And put it next to PAGE_NONE as PAGE_EXECONLY_X is
somehow PAGE_NONE + EXEC just like all other SOMETHING_X are
just SOMETHING + EXEC.
On book3s/64 PAGE_EXECONLY becomes PAGE_READONLY_X.
On book3s/64, as PAGE_EXECONLY is only valid for Radix add
VM_READ flag in vm_get_page_prot() for non-Radix.
And update access_error() so that a non exec fault on a VM_EXEC only
mapping is always invalid, even when the underlying layer don't
always generate a fault for that.
For 8xx, set PAGE_EXECONLY_X as _PAGE_NA | _PAGE_EXEC.
For others, only set it as just _PAGE_EXEC
With that change, 8xx, e500 and 44x fully honor execute-only
protection.
On 40x that is a partial implementation of execute-only. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.
On 603 MMU, TLB missed are handled by SW and there are separate
DTLB and ITLB. Execute-only is therefore now supported by not loading
DTLB when read access is not permitted.
On hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4283ea9cbef9ff2fbee468904800e1962bc8fc18.1695659959.git.christophe.leroy@csgroup.eu
On 603 MMU, TLB missed are handled by SW and there are separated
DTLB and ITLB. It is therefore possible to implement execute-only
protection by not loading DTLB when read access is not permitted.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ, remove
_PAGE_USER and add _PAGE_READ. Then use the virtual address to know
whether user rights or kernel rights are to be used.
With that change, 603 MMU now honors execute-only protection.
For hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b7702dd5a041ec59055ed2880f4952e94c087a2e.1695659959.git.christophe.leroy@csgroup.eu
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842de ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5798782869fe4d2698f104948dabd17657b89395.1695659959.git.christophe.leroy@csgroup.eu
_PAGE_USER is used to select the zone. Today zone 0 is kernel
and zone 1 is user.
To implement _PAGE_NONE, _PAGE_USER is cleared, leading to no access
for user but kernel still has access to the page so it's possible for
a user application to write in that page by using a kernel function
as trampoline.
What is really wanted is to have user rights on pages below TASK_SIZE
and no user rights on pages above TASK_SIZE. Use zones for that.
There are 16 zones so lets use the 4 upper address bits to set the
zone and declare zone rights based on TASK_SIZE.
Then drop _PAGE_USER and reuse it as _PAGE_READ that will be checked
in Data TLB miss handler. That will properly handle PAGE_NONE for
both kernel and user.
In addition, it partially implements execute-only right. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2a13e3ba8a5dec43143cc1f9a91ec71ea1529f3c.1695659959.git.christophe.leroy@csgroup.eu
44x MMU has 6 page protection bits:
- R, W, X for supervisor
- R, W, X for user
It means that it can support X without R.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ,
remove _PAGE_USER and add _PAGE_READ. In order to insert bits in
one go during TLB miss, move _PAGE_ACCESSED and put _PAGE_READ
just after _PAGE_DIRTY so that _PAGE_DIRTY is copied into SW and
_PAGE_READ into SR at once.
With that change, 44x now also honors execute-only protection.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/043e17987b260b99b45094138c6cb2e89e63d499.1695659959.git.christophe.leroy@csgroup.eu
e500 MMU has 6 page protection bits:
- R, W, X for supervisor
- R, W, X for user
It means that it can support X without R.
To do that, _PAGE_READ flag is needed.
With 32 bits PTE there is no bit available for it in PTE. On the
other hand the only real use of _PAGE_USER is to implement PAGE_NONE
by clearing _PAGE_USER. As _PAGE_NONE can also be implemented by
clearing _PAGE_READ, remove _PAGE_USER and add _PAGE_READ. Move
_PAGE_PRESENT into bit 30 so that _PAGE_READ can match SR bit.
With 64 bits PTE _PAGE_USER is already the combination of SR and UR
so all we need to do is to rename it _PAGE_READ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0849ab6bf7ae2af23f94b0457fa40d0ea3983fe4.1695659959.git.christophe.leroy@csgroup.eu
pte_user() is now only used in pte_access_permitted() to check
access on vmas. User flag is cleared to make a page unreadable.
So rename it pte_read() and remove pte_user() which isn't used
anymore.
For the time being it checks _PAGE_USER but in the near futur
all plateforms will be converted to _PAGE_READ so lets support
both for now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/72cbb5be595e9ef884140def73815ed0b0b37010.1695659959.git.christophe.leroy@csgroup.eu
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842de ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1f79b88db54d030ada776dc9845e0e88345bfc28.1695659959.git.christophe.leroy@csgroup.eu
book3s64 need specific masks because it needs _PAGE_PRIVILEGED
for PAGE_NONE.
book3s64 already has _PAGE_RW and _PAGE_RWX.
So add _PAGE_NA, _PAGE_RO and _PAGE_ROX and remove specific
permission masks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d37a418de52e2c950cad6797e81663b56991366f.1695659959.git.christophe.leroy@csgroup.eu
