imx6ul-14x14-evk does not have a GPIO dedicated for reading the card
detect pin on the eSDHC2 micro-SD port.
Pass the "broken-cd" property to describe the absence of the card detect
GPIO so that polling must be used.
According to Documentation/devicetree/bindings/mmc/mmc-controller.yaml:
broken-cd:
$ref: /schemas/types.yaml#/definitions/flag
description:
There is no card detection available; polling must be used.
Even though no error is oberved in the kernel, the lack of the
'broken-cd' property caused the micro-SD to not be detected in U-Boot,
so let's improve the device tree description to make it more accurate.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LAN8720 needs a reset of every clock enable. The reset needs
to be done at device level, due the flag PHY_RST_AFTER_CLK_EN.
So, add phy-handle by creating mdio child node inside fec.
This will eventually move the phy-reset-gpio which is defined
in fec node.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.
So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following warning is seen when building with W=1:
arch/arm/boot/dts/imx7s.dtsi:551.39-553.7: Warning (unique_unit_address): /soc/aips-bus@30000000/ocotp-ctrl@30350000/temp-grade@10: duplicate unit-address (also used in node /soc/aips-bus@30000000/ocotp-ctrl@30350000/speed-grade@10)
Since temp-grade and speed-grade point to the same node, replace them by
a single one to avoid the duplicate unit-address warning.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without the onkey device it isn't possible to power off the system using
the X_PMIC_nONKEY signal which is routed to the SoM pin header.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx51-babbage has a TFP410 chip that receives 24-bit RGB parallel
input and convert it to DVI.
Fix the device tree description to reflect the real hardware.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mux the HDMI CEC pin to make HDMI CEC working. With this change HDMI CEC
seems to work fine on a Apalis iMX6 on Ixora using cec-ctl.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
While the EPDC is optional, both consumer and industrial editions
have the PXP module, so adding it to the corresponding .dtsi
Information taken from freescale kernel, compared with the
reference manual and tested by a separate program.
Since it does not depend on external wiring, the
status = "disabled" is left out here.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some pinmuxings are obviously wrong, originating from a copy/paste
error. This patch corrects that with the following strategy:
- Set all reserved bits to zero
- Leave drive strength and slew rate as is
- Add sensible pull and hysteresis depending on the function of the pin
- Not used pins are muxed to their reset-value defined by the SoC
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The devicetree specification recommends using generic node names.
Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ZII VF610 Board Rev. B is supposed to have exactly the same I2C config
as Rev. C, including I2C bus recovery settings. Drop redundant I2C
properties that are already specified in vf610-zii-dev.dtsi
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch sets initial buck regulator modes explicitly to a state this
hardware needs. So a wrong initial mode set by bootloader or pmic itself
does not interfere anymore.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cabling used to connect devices to USBH1 on RDU2 does not meet USB
spec cable quality and cable length requirements to operate at High
Speed, so limit the port to Full Speed only.
Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".
Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add node for UCS1002 USB charger chip connected to front panel USB and
replace "regulator-fixed" previously used to control VBUS.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Otherwise, the system will hang if USB driver try to access
portsc register.
Cc: André Draszik <git@andred.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Embedded Artists COM board is based on NXP i.MX7ULP.
It has a BD70528 PMIC from Rohm with discrete DCDC powering option and
improved current observability (compared to the existing NXP i.MX7ULP EVK).
Add the initial support for the board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the LS1021A-TSN board, the 2 Atheros AR8031 PHYs for eth0 and eth1
have interrupt lines connected to the shared IRQ2_B LS1021A pin.
Switching to interrupts offloads the PHY library from the task of
polling the MDIO status and AN registers (1, 4, 5) every second.
Unfortunately, the BCM5464R quad PHY connected to the switch does not
appear to have an interrupt line routed to the SoC.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a node describing the six external interrupt lines IRQ0-IRQ5
with configurable polarity.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The internal usbphy of usbhost port1 is only full-speed capable.
We set this limitation in the dtsi.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The usb port represented by &usbhost1 uses an USB phy internal to the
SoC. We add the phy_type to the base dtsi so the board dts only have to
overwrite it if they use a different configuration. While at it we also
pin the usbhost port to host mode.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warning is seen with W=1:
DTC arch/arm/boot/dts/imx6sll-kobo-clarahd.dtb
arch/arm/boot/dts/e60k02.dtsi:51.9-53.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Pass the memory unit address to fix the problem.
While at it, also pass 'device_type = "memory"', which is recommended
for memory nodes.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The device is almost identical to the Kobo Clara HD. The only
spotted difference is the SoC. It contains an imx6sl
instead of an imx6sll.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX7D SDB Rev-A board should use its own board compatible
string instead of default i.MX7D SDB board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX6SX SDB Rev-A board should use its own board compatible
string instead of default i.MX6SX SDB board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LCD used with the imx6q-logicpd board has an integrated
ili2117a touch controller connected to i2c1.
This patch adds the node to enable this feature.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
11 patches, all in drivers (no core changes) that are either minor
cleanups or small fixes. They were late arriving, but still safe for
-rc1.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXeyDEiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbijAQDIuM45
xeEXgWXF8c/tYuvildK1WjyVzwBO2k563lUmYQEA4rxSzkmhtcaMTDuk4hI4Y4TP
p87U1bXNSJ7tCpFU15w=
=W43H
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
scsi: megaraid_sas: Make poll_aen_lock static
scsi: sd_zbc: Improve report zones error printout
scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
scsi: qla2xxx: unregister ports after GPN_FT failure
scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
scsi: pm80xx: Remove unused include of linux/version.h
scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
scsi: scsi_transport_sas: Fix memory leak when removing devices
scsi: lpfc: size cpu map by last cpu id set
scsi: ibmvscsi_tgt: Remove unneeded variable rc
-----BEGIN PGP SIGNATURE-----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=gey9
-----END PGP SIGNATURE-----
Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:
- one fix for stable (oops during oplock break)
- two timestamp fixes including important one for updating mtime at
close to avoid stale metadata caching issue on dirty files (also
improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
wire)
- two fixes for "modefromsid" mount option for file create (now
allows mode bits to be set more atomically and accurately on create
by adding "sd_context" on create when modefromsid specified on
mount)
- two fixes for multichannel found in testing this week against
different servers
- two small cleanup patches"
* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve check for when we send the security descriptor context on create
smb3: fix mode passed in on create for modetosid mount option
cifs: fix possible uninitialized access and race on iface_list
cifs: Fix lookup of SMB connections on multichannel
smb3: query attributes on file close
smb3: remove unused flag passed into close functions
cifs: remove redundant assignment to pointer pneg_ctxt
fs: cifs: Fix atime update check vs mtime
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make __d_alloc() static
fs/namespace: add __user to open_tree and move_mount syscalls
fs/fnctl: fix missing __user in fcntl_rw_hint()
-----BEGIN PGP SIGNATURE-----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=rWRP
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.5' of git://github.com/jonmason/ntb
Pull NTB update from Jon Mason:
"Just a simple patch to add a new Hygon Device ID to the AMD NTB device
driver"
* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
NTB: Add Hygon Device ID
Pull more input updates from Dmitry Torokhov:
- fixups for Synaptics RMI4 driver
- a quirk for Goodinx touchscreen on Teclast tablet
- a new keycode definition for activating privacy screen feature found
on a few "enterprise" laptops
- updates to snvs_pwrkey driver
- polling uinput device for writing (which is always allowed) now works
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
Input: goodix - add upside-down quirk for Teclast X89 tablet
Input: add privacy screen toggle keycode
Input: uinput - fix returning EPOLLOUT from uinput_poll
Input: snvs_pwrkey - remove gratuitous NULL initializers
Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
- Fix a UAF when reporting writeback errors
- Fix a race condition when handling page uptodate on a blocksize <
pagesize file that is also fragmented
-----BEGIN PGP SIGNATURE-----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=+LzI
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"Fix a race condition and a use-after-free error:
- Fix a UAF when reporting writeback errors
- Fix a race condition when handling page uptodate on fragmented file
with blocksize < pagesize"
* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: stop using ioend after it's been freed in iomap_finish_ioend()
iomap: fix sub-page uptodate handling
- Fix a crash in the log setup code when log mounting fails
- Fix a hang when allocating space on the realtime device
- Fix a block leak when freeing space on the realtime device
-----BEGIN PGP SIGNATURE-----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=Ps4B
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Fix a couple of resource management errors and a hang:
- fix a crash in the log setup code when log mounting fails
- fix a hang when allocating space on the realtime device
- fix a block leak when freeing space on the realtime device"
* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mount failure crash on invalid iclog memory access
xfs: don't check for AG deadlock for realtime files in bunmapi
xfs: fix realtime file data space leak
Orangefs has no open, and orangefs checks file permissions
on each file access. Posix requires that file permissions
be checked on open and nowhere else. Orangefs-through-the-kernel
needs to seem posix compliant.
The VFS opens files, even if the filesystem provides no
method. We can see if a file was successfully opened for
read and or for write by looking at file->f_mode.
When writes are flowing from the page cache, file is no
longer available. We can trust the VFS to have checked
file->f_mode before writing to the page cache.
The mode of a file might change between when it is opened
and IO commences, or it might be created with an arbitrary mode.
We'll make sure we don't hit EACCES during the IO stage by
using UID 0.
-----BEGIN PGP SIGNATURE-----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=9AOz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
"orangefs: posix open permission checking...
Orangefs has no open, and orangefs checks file permissions on each
file access. Posix requires that file permissions be checked on open
and nowhere else. Orangefs-through-the-kernel needs to seem posix
compliant.
The VFS opens files, even if the filesystem provides no method. We can
see if a file was successfully opened for read and or for write by
looking at file->f_mode.
When writes are flowing from the page cache, file is no longer
available. We can trust the VFS to have checked file->f_mode before
writing to the page cache.
The mode of a file might change between when it is opened and IO
commences, or it might be created with an arbitrary mode.
We'll make sure we don't hit EACCES during the IO stage by using
UID 0"
[ This is "posixish", but not a great solution in the long run, since a
proper secure network server shouldn't really trust the client like this.
But proper and secure POSIX behavior requires an open method and a
resulting cookie for IO of some kind, or similar. - Linus ]
* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: posix open permission checking...
Possibly most interesting is Trond's fixes for some callback races that
were due to my incomplete understanding of rpc client shutdown.
Unfortunately at the last minute I've started noticing a new
intermittent failure to send callbacks. As the logic seems basically
correct, I'm leaving Trond's patches in for now, and hope to find a fix
in the next week so I don't have to revert those patches.
-----BEGIN PGP SIGNATURE-----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=b2zA
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"This is a relatively quiet cycle for nfsd, mainly various bugfixes.
Possibly most interesting is Trond's fixes for some callback races
that were due to my incomplete understanding of rpc client shutdown.
Unfortunately at the last minute I've started noticing a new
intermittent failure to send callbacks. As the logic seems basically
correct, I'm leaving Trond's patches in for now, and hope to find a
fix in the next week so I don't have to revert those patches"
* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
nfsd: depend on CRYPTO_MD5 for legacy client tracking
NFSD fixing possible null pointer derefering in copy offload
nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
nfsd: Ensure CLONE persists data and metadata changes to the target file
SUNRPC: Fix backchannel latency metrics
nfsd: restore NFSv3 ACL support
nfsd: v4 support requires CRYPTO_SHA256
nfsd: Fix cld_net->cn_tfm initialization
lockd: remove __KERNEL__ ifdefs
sunrpc: remove __KERNEL__ ifdefs
race in exportfs_decode_fh()
nfsd: Drop LIST_HEAD where the variable it declares is never used.
nfsd: document callback_wq serialization of callback code
nfsd: mark cb path down on unknown errors
nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
nfsd: minor 4.1 callback cleanup
SUNRPC: Fix svcauth_gss_proxy_init()
SUNRPC: Trace gssproxy upcall results
sunrpc: fix crash when cache_head become valid before update
nfsd: remove private bin2hex implementation
...
Highlights include:
Features:
- NFSv4.2 now supports cross device offloaded copy (i.e. offloaded copy
of a file from one source server to a different target server).
- New RDMA tracepoints for debugging congestion control and Local Invalidate
WRs.
Bugfixes and cleanups
- Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
layoutreturn
- Handle bad/dead sessions correctly in nfs41_sequence_process()
- Various bugfixes to the delegation return operation.
- Various bugfixes pertaining to delegations that have been revoked.
- Cleanups to the NFS timespec code to avoid unnecessary conversions
between timespec and timespec64.
- Fix unstable RDMA connections after a reconnect
- Close race between waking an RDMA sender and posting a receive
- Wake pending RDMA tasks if connection fails
- Fix MR list corruption, and clean up MR usage
- Fix another RPCSEC_GSS issue with MIC buffer space
-----BEGIN PGP SIGNATURE-----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=VZFk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
copy of a file from one source server to a different target
server).
- New RDMA tracepoints for debugging congestion control and Local
Invalidate WRs.
Bugfixes and cleanups
- Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
layoutreturn
- Handle bad/dead sessions correctly in nfs41_sequence_process()
- Various bugfixes to the delegation return operation.
- Various bugfixes pertaining to delegations that have been revoked.
- Cleanups to the NFS timespec code to avoid unnecessary conversions
between timespec and timespec64.
- Fix unstable RDMA connections after a reconnect
- Close race between waking an RDMA sender and posting a receive
- Wake pending RDMA tasks if connection fails
- Fix MR list corruption, and clean up MR usage
- Fix another RPCSEC_GSS issue with MIC buffer space"
* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
SUNRPC: Capture completion of all RPC tasks
SUNRPC: Fix another issue with MIC buffer space
NFS4: Trace lock reclaims
NFS4: Trace state recovery operation
NFSv4.2 fix memory leak in nfs42_ssc_open
NFSv4.2 fix kfree in __nfs42_copy_file_range
NFS: remove duplicated include from nfs4file.c
NFSv4: Make _nfs42_proc_copy_notify() static
NFS: Fallocate should use the nfs4_fattr_bitmap
NFS: Return -ETXTBSY when attempting to write to a swapfile
fs: nfs: sysfs: Remove NULL check before kfree
NFS: remove unneeded semicolon
NFSv4: add declaration of current_stateid
NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
SUNRPC: Avoid RPC delays when exiting suspend
NFS: Add a tracepoint in nfs_fh_to_dentry()
NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
...
We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.
Add check for that mount flag before calling ad_sd_context in
open init.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXeqGZgAKCRCAXGG7T9hj
vqALAP91rVmsKE1DwjAvu/mzd7eHskIuAhB/1bxNP6doeJQ6jQD/Vbv06V44fMXG
JANwgnQIpzJA+n+ek4Up4aGktY8TWAs=
=NYv9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a patch to fix a build warning
- a cleanup of no longer needed code in the Xen event handling
- a small series for the Xen grant driver avoiding high order
allocations and replacing an insane global limit by a per-call one
- a small series fixing Xen frontend/backend module referencing
* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: allow module to be cleanly unloaded
xen/xenbus: reference count registered modules
xen/gntdev: switch from kcalloc() to kvcalloc()
xen/gntdev: replace global limit of mapped pages by limit per call
xen/gntdev: remove redundant non-zero check on ret
xen/events: remove event handling recursion detection
Merge misc Kconfig updates from Andrew Morton:
"A number of changes to Kconfig files under lib/ from Changbin Du and
Krzysztof Kozlowski"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/: fix Kconfig indentation
kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'
kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'
kernel-hacking: create a submenu for scheduler debugging options
kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE
kernel-hacking: move Oops into 'Lockups and Hangs'
kernel-hacking: move kernel testing and coverage options to same submenu
kernel-hacking: group kernel data structures debugging together
kernel-hacking: create submenu for arch special debugging options
kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'
In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().
v2: fix referenced commit id
Fixes: 14012c9f3b ("r8169: fix jumbo configuration for RTL8168evl")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.
So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.
wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).
At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.
However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").
But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the read side version of the previous commit: it simplifies the
logic to only wake up waiting writers when necessary, and makes sure to
use a synchronous wakeup. This time not so much for GNU make jobserver
reasons (that pipe never fills up), but simply to get the writer going
quickly again.
A bit less verbose commentary this time, if only because I assume that
the write side commentary isn't going to be ignored if you touch this
code.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
