It's been a fairly calm development cycle. There are a few
last-minute ALSA core fixes, most notably for covering PCM ioctl
races, but the most of rest are device-specific changes.
Below are some highlights:
* ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
* ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
* HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
* USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices
-----BEGIN PGP SIGNATURE-----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=5cCU
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
-----BEGIN PGP SIGNATURE-----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=Bc0l
-----END PGP SIGNATURE-----
Merge tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a major reorg at platform Kconfig/Makefile files, organizing them per
vendor. The other media Kconfig/Makefile files also sorted
- New sensor drivers: hi847, isl7998x, ov08d10
- New Amphion vpu decoder stateful driver
- New Atmel microchip csi2dc driver
- tegra-vde driver promoted from staging
- atomisp: some fixes for it to work on BYT
- imx7-mipi-csis driver promoted from staging and renamed
- camss driver got initial support for VFE hardware version Titan 480
- mtk-vcodec has gained support for MT8192
- lots of driver changes, fixes and improvements
* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
media: amphion: cleanup media device if register it fail
media: amphion: fix some issues to improve robust
media: amphion: fix some error related with undefined reference to __divdi3
media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
media: vidtv: use vfree() for memory allocated with vzalloc()
media: m5mols/m5mols.h: document new reset field
media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
media: platform: Remove unnecessary print function dev_err()
media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
media: platform: amphion: Fix build error without MAILBOX
media: spi: Kconfig: Place SPI drivers on a single menu
media: i2c: Kconfig: move camera drivers to the top
media: atomisp: fix bad usage at error handling logic
media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
media: media/*/Kconfig: sort entries
media: Kconfig: cleanup VIDEO_DEV dependencies
media: platform/*/Kconfig: make manufacturer menus more uniform
media: platform: Create vendor/{Makefile,Kconfig} files
...
Lots of small fixes and code cleanups across most of the fbdev drivers.
This includes conversions to use helper functions, const conversions, spelling
fixes, help text updates, adding return value checks, small build fixes, and
much more.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYjogFQAKCRD3ErUQojoP
X3Y7AQD/0Qd0zm6klv4EPeyLXOYzs6uXdyHiJGyCBABP3WxKZQD+J4yNXjd1g50A
iGbsawaUpFMcaXTETr0NcrtRkc5jCgY=
=HHa3
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Lots of small fixes and code cleanups across most of the fbdev
drivers.
This includes conversions to use helper functions, const conversions,
spelling fixes, help text updates, adding return value checks, small
build fixes, and much more"
* tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits)
video: fbdev: kyro: make read-only array ODValues static const
video: fbdev: offb: fix warning comparing pointer to 0
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
video: fbdev: sm712fb: Fix crash in smtcfb_write()
video: fbdev: s3c-fb: fix platform_get_irq.cocci warning
video: fbdev: sm712fb: Fix crash in smtcfb_read()
video: fbdev: via: check the return value of kstrdup()
video: fbdev: au1100fb: Spelling s/palette/palette/
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
video: fbdev: atari: Remove unused atafb_setcolreg()
video: fbdev: atari: Convert to standard round_up() helper
video: fbdev: atari: Fix TT High video mode
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: Use sysfs_emit() instead of snprintf()
video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt
video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text
video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err()
video: fbdev: pxa168fb: Remove unnecessary print function dev_err()
...
- Convert to sysfs_emit() in favor of sprintf()
- Improve fallback to speed modes if eMMC HS200 fails
MMC host:
- dw_mmc: Allow variants to set minimal supported clock rate
- dw-mmc-rockchip: Fix problems with invalid clock rates
- litex_mmc: Add new DT based driver for the LiteX's LiteSDCard interface
- litex_mmc: Add Gabriel Somlo and Joel Stanley as co-maintainers for LiteX
- mtk-sd: Add support for the Mediatek MT8186 variant
- renesas_sdhi: Add support for RZ/G2UL variant
- renesas_sdhi: Add support for RZ/V2L variant
- rtsx_pci: Adjust power-on sequence to conform to the SD spec
- sdhci-am654: Add support for TI's AM62 variant
- sdhci_am654: Fixup support for TI's AM64 variant
- sdhci-esdhc-imx: Add support for the imx93 variant
- sdhci-msm: Add support for the msm8953 variant
- sdhci-pci-gli: Add support for runtime PM for the GL9763E variant
- sdhci-pci-gli: Adjustments of the SSC function for the GL975x variants
- sdhci-tegra: Add support for wake on SD card event
- sunxi-mmc: Add support for Allwinner's F1c100s variant
- sunxi-mmc: Add support for D1 MMC variant
-----BEGIN PGP SIGNATURE-----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=1Iot
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Convert to sysfs_emit() in favor of sprintf()
- Improve fallback to speed modes if eMMC HS200 fails
MMC host:
- dw_mmc: Allow variants to set minimal supported clock rate
- dw-mmc-rockchip: Fix problems with invalid clock rates
- litex_mmc: Add new DT based driver for the LiteX's LiteSDCard
interface
- litex_mmc: Add Gabriel Somlo and Joel Stanley as co-maintainers for
LiteX
- mtk-sd: Add support for the Mediatek MT8186 variant
- renesas_sdhi: Add support for RZ/G2UL variant
- renesas_sdhi: Add support for RZ/V2L variant
- rtsx_pci: Adjust power-on sequence to conform to the SD spec
- sdhci-am654: Add support for TI's AM62 variant
- sdhci_am654: Fixup support for TI's AM64 variant
- sdhci-esdhc-imx: Add support for the imx93 variant
- sdhci-msm: Add support for the msm8953 variant
- sdhci-pci-gli: Add support for runtime PM for the GL9763E variant
- sdhci-pci-gli: Adjustments of the SSC function for the GL975x
variants
- sdhci-tegra: Add support for wake on SD card event
- sunxi-mmc: Add support for Allwinner's F1c100s variant
- sunxi-mmc: Add support for D1 MMC variant"
* tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (37 commits)
dt-bindings: mmc: renesas,sdhi: Document RZ/G2UL SoC
mmc: tmio: remove outdated members from host struct
mmc: mtk-sd: Silence delay phase calculation debug log
mmc: davinci_mmc: Handle error for clk_enable
mmc: sdhci-pci-gli: Add runtime PM for GL9763E
mmc: core: Drop HS400 caps unless 8-bit bus is supported too
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
mmc: core: Improve fallback to speed modes if eMMC HS200 fails
dt-bindings: mmc: sunxi: add Allwinner F1c100s compatible
mmc: dw-mmc-rockchip: Fix handling invalid clock rates
mmc: dw_mmc: Support setting f_min from host drivers
mmc: host: Drop commas after SoC match table sentinels
mmc: rtsx: add 74 Clocks in power on flow
dt-bindings: mmc: renesas,sdhi: Document RZ/V2L SoC
mmc: sh_mmcif: Simplify division/shift logic
mmc: sdhci_am654: Add Support for TI's AM62 SoC
dt-bindings: mmc: imx-esdhc: Add imx93 compatible string
dt-bindings: mmc: sdhci-am654: Add compatible string for AM62 SoC
mmc: sdhci_am654: Fix the driver data of AM64 SoC
mmc: core: use sysfs_emit() instead of sprintf()
...
For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
* Code simplification in pata_platform using platform_get_mem_or_io(),
from Lad.
* Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
* Various cleanups and code simplification in libata-scsi, from me.
* Remove dead code in libata-acpi, from Sergey.
* Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci) to
speedup boot, from Paul.
* Simplify functions declaration and use for functions always returning
0 in libata-core, from Sergey.
* Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n drivers,
from Sergey.
* Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
* Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
* Renae ahci_board_mobile to board_ahci_low_power to be more descriptive
of the feature as that is also used on PC and server AHCI adapters,
from Mario.
* Cleanup of OF match tables, from Geert.
* Simplify the pata_pxa driver initialization using platform_get_irq(),
from Minghao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYjlsYwAKCRDdoc3SxdoY
dn35AP43C5aPtM1JDd+uGZ6JC5QsFPsHYtsX3S7UsO5QhtFeXgD/d+XVYt+pD7wk
WEaUpH9bB0jRuEFp9yISZeqJzxeuzw8=
=nxBY
-----END PGP SIGNATURE-----
Merge tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, no big change but many small fixes and code cleanup to
libata, the ahci driver and various pata drivers. In more details:
- Code simplification in pata_platform using
platform_get_mem_or_io(), from Lad.
- Fix read-only arrays declarations as const in pata_atiixp and
pata_pdc202xx_old, from Colin.
- Various cleanups and code simplification in libata-scsi, from me.
- Remove dead code in libata-acpi, from Sergey.
- Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci)
to speedup boot, from Paul.
- Simplify functions declaration and use for functions always
returning 0 in libata-core, from Sergey.
- Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n
drivers, from Sergey.
- Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366,
pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey.
- Some libata-sff and libata-scsi code cleanup (e.g. change functions
to return "bool"), from Sergey.
- Renae ahci_board_mobile to board_ahci_low_power to be more
descriptive of the feature as that is also used on PC and server
AHCI adapters, from Mario.
- Cleanup of OF match tables, from Geert.
- Simplify the pata_pxa driver initialization using
platform_get_irq(), from Minghao"
* tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (38 commits)
ata: pata_pxa: Use platform_get_irq() to get the interrupt
ata: Drop commas after OF match table sentinels
ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item
ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE`
ata: ahci: Rename board_ahci_mobile
ata: pata_hpt37x: merge transfer mode setting methods
ata: libata-sff: use *switch* statement in ata_sff_dev_classify()
ata: add/use ata_taskfile::{error|status} fields
ata: Kconfig: fix sata gemini compile test condition
ata: libata-scsi: use *switch* statements to check SCSI command codes
ata: libata-sff: refactor ata_sff_altstatus()
ata: libata-sff: refactor ata_sff_set_devctl()
ata: libata-sff: make ata_resources_present() return 'bool'
ata: pata_hpt3x2n: disable fast interrupts in prereset() method
ata: pata_hpt37x: disable fast interrupts in prereset() method
ata: pata_hpt366: disable fast interrupts in prereset() method
ata: pata_mpc52xx: use GFP_KERNEL
ata: sata_rcar: drop unused #define's
ata: pata_hpt366: check channel enable bits
ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool'
...
This KUnit update for Linux 5.18-rc1 consists of:
- changes to decrease macro layering string, integer, EQ/NE asserts
- remove unused macros
- several cleanups and fixes
- new list tests for list_del_init_careful(), list_is_head() and
list_entry_is_head()
-----BEGIN PGP SIGNATURE-----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=e1/u
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- changes to decrease macro layering string, integer, EQ/NE asserts
- remove unused macros
- several cleanups and fixes
- new list tests for list_del_init_careful(), list_is_head() and
list_entry_is_head()
* tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
list: test: Add a test for list_entry_is_head()
list: test: Add a test for list_is_head()
list: test: Add test for list_del_init_careful()
kunit: cleanup assertion macro internal variables
kunit: factor out str constants from binary assertion structs
kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros
kunit: remove va_format from kunit_assert
kunit: tool: drop mostly unused KunitResult.result field
kunit: decrease macro layering for EQ/NE asserts
kunit: decrease macro layering for integer asserts
kunit: reduce layering in string assertion macros
kunit: drop unused intermediate macros for ptr inequality checks
kunit: make KUNIT_EXPECT_EQ() use KUNIT_EXPECT_EQ_MSG(), etc.
kunit: drop unused assert_type from kunit_assert and clean up macros
kunit: split out part of kunit_assert into a static const
kunit: factor out kunit_base_assert_format() call into kunit_fail()
kunit: drop unused kunit* field in kunit_assert
kunit: move check if assertion passed into the macros
kunit: add example test case showing off all the expect macros
This Kselftest test for Linux 5.18-rc1 consists of several build and
cleanup fixes.
- removing obsolete config options
- removing dependency on internal kernel macros
- adding config options
- several build fixes related to headers and install paths
-----BEGIN PGP SIGNATURE-----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=Q6bT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several build and cleanup fixes:
- removing obsolete config options
- removing dependency on internal kernel macros
- adding config options
- several build fixes related to headers and install paths"
* tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits)
selftests: Fix build when $(O) points to a relative path
selftests: netfilter: fix a build error on openSUSE
selftests: kvm: add generated file to the .gitignore
selftests/exec: add generated files to .gitignore
selftests: add kselftest_install to .gitignore
selftests/rtc: continuously read RTC in a loop for 30s
selftests/lkdtm: Add UBSAN config
selftests/lkdtm: Remove dead config option
selftests/exec: Rename file binfmt_script to binfmt_script.py
selftests: Use -isystem instead of -I to include headers
selftests: vm: remove dependecy from internal kernel macros
selftests: vm: Add the uapi headers include variable
selftests: mptcp: Add the uapi headers include variable
selftests: net: Add the uapi headers include variable
selftests: landlock: Add the uapi headers include variable
selftests: kvm: Add the uapi headers include variable
selftests: futex: Add the uapi headers include variable
selftests: Correct the headers install path
selftests: Add and export a kernel uapi headers path
selftests: set the BUILD variable to absolute path
...
Pull cgroup updates from Tejun Heo:
"All trivial cleanups without meaningful behavior changes"
* 'for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: cleanup comments
cgroup: Fix cgroup_can_fork() and cgroup_post_fork() kernel-doc comment
cgroup: rstat: retrieve current bstat to delta directly
cgroup: rstat: use same convention to assign cgroup_base_stat
Pull workqueue updates from Tejun Heo:
"Nothing major. Just follow-up cleanups from Lai after the earlier
synchronization simplification"
* 'for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Convert the type of pool->nr_running to int
workqueue: Use wake_up_worker() in wq_worker_sleeping() instead of open code
workqueue: Change the comments of the synchronization about the idle_list
workqueue: Remove the mb() pair between wq_worker_sleeping() and insert_work()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmI4yWsACgkQ4CHKc/GJ
qRAUhQf8CE5dBIblFU6Nfbiv/GHSu2AoHw8DRseeC7uSLGUzP9h2l1c0zMBzLIrf
ujKQGU/8n2AgUZBwxd59vbi0WHLD7K9qr3Yj6hH0QnTmHiv89GXEnYXrHHAJ506q
OGzT7NUiz5pEHrFyE5yqKQ2axy+Q+JrAfyzHQPEdzNtl0DJurVuHATYz5b9Pk6zW
27PrCIFjQyIkqw2s9oBCYZevAZkiAoxXntzhXicrqksZs4htArzn7LDTulpccnhy
6hwrCSg91E1Tza8oTNOCNvXt/YUGa6Q1RBEeUDmLOLwHSuOIfTPb5zW25vCvpyMK
008OYHcw7tspWnEfAEWqIDwMFWcjDg==
=2g9n
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A few non-trivial SLUB code cleanups, most notably a refactoring of
deactivate_slab().
- A bunch of trivial changes, such as removal of unused parameters,
making stuff static, and employing helper functions.
* tag 'slab-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: Delete useless parameter of alloc_slab_page()
mm: slab: Delete unused SLAB_DEACTIVATED flag
mm/slub: remove forced_order parameter in calculate_sizes
mm/slub: refactor deactivate_slab()
mm/slub: limit number of node partial slabs only in cache creation
mm/slub: use helper macro __ATTR_XX_MODE for SLAB_ATTR(_RO)
mm/slab_common: use helper function is_power_of_2()
mm/slob: make kmem_cache_boot static
- New user_events interface. User space can register an event with the kernel
describing the format of the event. Then it will receive a byte in a page
mapping that it can check against. A privileged task can then enable that
event like any other event, which will change the mapped byte to true,
telling the user space application to start writing the event to the
tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When set,
the tracing buffer will be saved in the snapshot buffer at boot up when
the kernel hands things over to user space. This will keep the traces that
happened at boot up available even if user space boot up has tracing as
well.
- Have TRACE_EVENT_ENUM() also update trace event field type descriptions.
Thus if a static array defines its size with an enum, the user space trace
event parsers can still know how to parse that array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This will
make one tracepoint be able to trace different content and not be stuck at
only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events for
mapping).
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiO3RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhQzAQDtek5p80p/zkMGymm14wSH6qq0NdgN
Kv7fTBwEewUa0gD/UCOVLw4Oj+JtHQhCa3sCGZopmRv0BT1+4UQANqosKQY=
=Au08
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- New user_events interface. User space can register an event with the
kernel describing the format of the event. Then it will receive a
byte in a page mapping that it can check against. A privileged task
can then enable that event like any other event, which will change
the mapped byte to true, telling the user space application to start
writing the event to the tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When
set, the tracing buffer will be saved in the snapshot buffer at boot
up when the kernel hands things over to user space. This will keep
the traces that happened at boot up available even if user space boot
up has tracing as well.
- Have TRACE_EVENT_ENUM() also update trace event field type
descriptions. Thus if a static array defines its size with an enum,
the user space trace event parsers can still know how to parse that
array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This
will make one tracepoint be able to trace different content and not
be stuck at only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events
for mapping).
* tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
tracing: Have type enum modifications copy the strings
user_events: Add trace event call as root for low permission cases
tracing/user_events: Use alloc_pages instead of kzalloc() for register pages
tracing: Add snapshot at end of kernel boot up
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
tracing: Fix strncpy warning in trace_events_synth.c
user_events: Prevent dyn_event delete racing with ioctl add/delete
tracing: Add TRACE_CUSTOM_EVENT() macro
tracing: Move the defines to create TRACE_EVENTS into their own files
tracing: Add sample code for custom trace events
tracing: Allow custom events to be added to the tracefs directory
tracing: Fix last_cmd_set() string management in histogram code
user_events: Fix potential uninitialized pointer while parsing field
tracing: Fix allocation of last_cmd in last_cmd_set()
user_events: Add documentation file
user_events: Add sample code for typical usage
user_events: Add self-test for validator boundaries
user_events: Add self-test for perf_event integration
user_events: Add self-test for dynamic_events integration
user_events: Add self-test for ftrace integration
...
Changes to RTLA:
- Support for adjusting tracing_threashold
- Add -a (auto) option to make it easier for users to debug in the field
- Add -e option to add more events to the trace
- Add --trigger option to add triggers to events
- Add --filter option to filter events
- Add support to save histograms to the file
- Add --dma-latency to set /dev/cpu_dma_latency
- Other fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiKhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpLmAP4u7cIl3pt5zJIik5QYGpvrS+qp2NCI
4ouVQPYvcUGjYwEAqp+5Wix6hVgLAFn5mcd9kXgS6i4JRzAhDaG2LZl7kwI=
=2bkl
-----END PGP SIGNATURE-----
Merge tag 'trace-rtla-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull RTLA tracing tool updates from Steven Rostedt:
"Real Time Analysis Tool updatesfor 5.18:
- Support for adjusting tracing_threashold
- Add -a (auto) option to make it easier for users to debug in the field
- Add -e option to add more events to the trace
- Add --trigger option to add triggers to events
- Add --filter option to filter events
- Add support to save histograms to the file
- Add --dma-latency to set /dev/cpu_dma_latency
- Other fixes and cleanups"
* tag 'trace-rtla-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla: Tools main loop cleanup
rtla/timerlat: Add --dma-latency option
rtla/osnoise: Fix osnoise hist stop tracing message
rtla: Check for trace off also in the trace instance
rtla/trace: Save event histogram output to a file
rtla: Add --filter support
rtla/trace: Add trace event filter helpers
rtla: Add --trigger support
rtla/trace: Add trace event trigger helpers
rtla: Add -e/--event support
rtla/trace: Add trace events helpers
rtla/timerlat: Add the automatic trace option
rtla/osnoise: Add the automatic trace option
rtla/osnoise: Add an option to set the threshold
rtla/osnoise: Add support to adjust the tracing_thresh
-----BEGIN PGP SIGNATURE-----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=EUpJ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Make %pK behave the same as %p for kptr_restrict == 0 also with
no_hash_pointers parameter
- Ignore the default console in the device tree also when console=null
or console="" is used on the command line
- Document console=null and console="" behavior
- Prevent a deadlock and a livelock caused by console_lock in panic()
- Make console_lock available for panicking CPU
- Fast query for the next to-be-used sequence number
- Use the expected return values in printk.devkmsg __setup handler
- Use the correct atomic operations in wake_up_klogd() irq_work handler
- Avoid possible unaligned access when handling %4cc printing format
* tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: fix return value of printk.devkmsg __setup handler
vsprintf: Fix %pK with kptr_restrict == 0
printk: make suppress_panic_printk static
printk: Set console_set_on_cmdline=1 when __add_preferred_console() is called with user_specified == true
Docs: printk: add 'console=null|""' to admin/kernel-parameters
printk: use atomic updates for klogd work
printk: Drop console_sem during panic
printk: Avoid livelock with heavy printk during panic
printk: disable optimistic spin during panic
printk: Add panic_in_progress helper
vsprintf: Move space out of string literals in fourcc_string()
vsprintf: Fix potential unaligned access
printk: ringbuffer: Improve prb_next_seq() performance
The struct folio is not declared in cacheflush.h so we need to provide
a forward declaration as otherwise users of this header file may get
warnings.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 522a0032af ("Add linux/cacheflush.h")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
In damon_sysfs_kdamond_release(), we have use container_of() to get
"kdamond" pointer, so there no need to get it once again.
Link: https://lkml.kernel.org/r/20220303075314.22502-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds a selftest for DAMON sysfs interface. It tests the
functionality of 'nr' files and existence of files in each directory of
the hierarchy.
Link: https://lkml.kernel.org/r/20220228081314.5770-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit links the DAMON sysfs interface to DAMON so that users can
control DAMON via the interface. In detail, this commit makes writing
'on' to 'state' file constructs DAMON contexts based on values that users
have written to relevant sysfs files and start the context. It supports
only virtual address spaces monitoring at the moment, though.
The files hierarchy of DAMON sysfs interface after this commit is shown
below. In the below figure, parents-children relations are represented
with indentations, each directory is having ``/`` suffix, and files in
each directory are separated by comma (",").
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
The usage is straightforward. Writing a number ('N') to each 'nr_*' file
makes directories named '0' to 'N-1'. Users can construct DAMON contexts
by writing proper values to the files in the straightforward manner and
start each kdamond by writing 'on' to 'kdamonds/<N>/state'.
Link: https://lkml.kernel.org/r/20220228081314.5770-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON's debugfs-based user interface served very well, so far. However,
it unnecessarily depends on debugfs, while DAMON is not aimed to be used
for only debugging. Also, the interface receives multiple values via one
file. For example, schemes file receives 18 values separated by white
spaces. As a result, it is ineffient, hard to be used, and difficult to
be extended. Especially, keeping backward compatibility of user space
tools is getting only challenging. It would be better to implement
another reliable and flexible interface and deprecate the debugfs
interface in long term.
To this end, this commit implements a stub of a part of the new user
interface of DAMON using sysfs. Specifically, this commit implements the
sysfs control parts for virtual address space monitoring.
More specifically, the idea of the new interface is, using directory
hierarchies and making one file for one value. The hierarchy that this
commit is introducing is as below. In the below figure, parents-children
relations are represented with indentations, each directory is having
``/`` suffix, and files in each directory are separated by comma (",").
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Writing a number <N> to each 'nr' file makes directories of name <0> to
<N-1> in the directory of the 'nr' file. That's all this commit does.
Writing proper values to relevant files will construct the DAMON contexts,
and writing a special keyword, 'on', to 'state' files for each kdamond
will ask DAMON to start the constructed contexts.
For a short example, using below commands for monitoring virtual address
spaces of a given workload is imaginable:
# cd /sys/kernel/mm/damon/admin/
# echo 1 > kdamonds/nr_kdamonds
# echo 1 > kdamonds/0/contexts/nr_contexts
# echo vaddr > kdamonds/0/contexts/0/operations
# echo 1 > kdamonds/0/contexts/0/targets/nr_targets
# echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
# echo on > kdamonds/0/state
Please note that this commit is implementing only the sysfs part stub as
abovely mentioned. This commit doesn't implement the special keywords for
'state' files. Following commits will do that.
[jiapeng.chong@linux.alibaba.com: fix missing error code in damon_sysfs_attrs_add_dirs()]
Link: https://lkml.kernel.org/r/20220302111120.24984-1-jiapeng.chong@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220228081314.5770-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit declares the number of legal values for each DAMON enum types
to make traversals of such DAMON enum types easy and safe.
Link: https://lkml.kernel.org/r/20220228081314.5770-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Introduce DAMON sysfs interface", v3.
Introduction
============
DAMON's debugfs-based user interface (DAMON_DBGFS) served very well, so
far. However, it unnecessarily depends on debugfs, while DAMON is not
aimed to be used for only debugging. Also, the interface receives
multiple values via one file. For example, schemes file receives 18
values. As a result, it is inefficient, hard to be used, and difficult to
be extended. Especially, keeping backward compatibility of user space
tools is getting only challenging. It would be better to implement
another reliable and flexible interface and deprecate DAMON_DBGFS in long
term.
For the reason, this patchset introduces a sysfs-based new user interface
of DAMON. The idea of the new interface is, using directory hierarchies
and having one dedicated file for each value. For a short example, users
can do the virtual address monitoring via the interface as below:
# cd /sys/kernel/mm/damon/admin/
# echo 1 > kdamonds/nr_kdamonds
# echo 1 > kdamonds/0/contexts/nr_contexts
# echo vaddr > kdamonds/0/contexts/0/operations
# echo 1 > kdamonds/0/contexts/0/targets/nr_targets
# echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
# echo on > kdamonds/0/state
A brief representation of the files hierarchy of DAMON sysfs interface is
as below. Childs are represented with indentation, directories are having
'/' suffix, and files in each directory are separated by comma.
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
│ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Detailed usage of the files will be described in the final Documentation
patch of this patchset.
Main Difference Between DAMON_DBGFS and DAMON_SYSFS
---------------------------------------------------
At the moment, DAMON_DBGFS and DAMON_SYSFS provides same features. One
important difference between them is their exclusiveness. DAMON_DBGFS
works in an exclusive manner, so that no DAMON worker thread (kdamond) in
the system can run concurrently and interfere somehow. For the reason,
DAMON_DBGFS asks users to construct all monitoring contexts and start them
at once. It's not a big problem but makes the operation a little bit
complex and unflexible.
For more flexible usage, DAMON_SYSFS moves the responsibility of
preventing any possible interference to the admins and work in a
non-exclusive manner. That is, users can configure and start contexts one
by one. Note that DAMON respects both exclusive groups and non-exclusive
groups of contexts, in a manner similar to that of reader-writer locks.
That is, if any exclusive monitoring contexts (e.g., contexts that started
via DAMON_DBGFS) are running, DAMON_SYSFS does not start new contexts, and
vice versa.
Future Plan of DAMON_DBGFS Deprecation
======================================
Once this patchset is merged, DAMON_DBGFS development will be frozen.
That is, we will maintain it to work as is now so that no users will be
break. But, it will not be extended to provide any new feature of DAMON.
The support will be continued only until next LTS release. After that, we
will drop DAMON_DBGFS.
User-space Tooling Compatibility
--------------------------------
As DAMON_SYSFS provides all features of DAMON_DBGFS, all user space
tooling can move to DAMON_SYSFS. As we will continue supporting
DAMON_DBGFS until next LTS kernel release, user space tools would have
enough time to move to DAMON_SYSFS.
The official user space tool, damo[1], is already supporting both
DAMON_SYSFS and DAMON_DBGFS. Both correctness tests[2] and performance
tests[3] of DAMON using DAMON_SYSFS also passed.
[1] https://github.com/awslabs/damo
[2] https://github.com/awslabs/damon-tests/tree/master/corr
[3] https://github.com/awslabs/damon-tests/tree/master/perf
Sequence of Patches
===================
First two patches (patches 1-2) make core changes for DAMON_SYSFS. The
first one (patch 1) allows non-exclusive DAMON contexts so that
DAMON_SYSFS can work in non-exclusive mode, while the second one (patch 2)
adds size of DAMON enum types so that DAMON API users can safely iterate
the enums.
Third patch (patch 3) implements basic sysfs stub for virtual address
spaces monitoring. Note that this implements only sysfs files and DAMON
is not linked. Fourth patch (patch 4) links the DAMON_SYSFS to DAMON so
that users can control DAMON using the sysfs files.
Following six patches (patches 5-10) implements other DAMON features that
DAMON_DBGFS supports one by one (physical address space monitoring,
DAMON-based operation schemes, schemes quotas, schemes prioritization
weights, schemes watermarks, and schemes stats).
Following patch (patch 11) adds a simple selftest for DAMON_SYSFS, and the
final one (patch 12) documents DAMON_SYSFS.
This patch (of 13):
To avoid interference between DAMON contexts monitoring overlapping memory
regions, damon_start() works in an exclusive manner. That is,
damon_start() does nothing bug fails if any context that started by
another instance of the function is still running. This makes its usage a
little bit restrictive. However, admins could aware each DAMON usage and
address such interferences on their own in some cases.
This commit hence implements non-exclusive mode of the function and allows
the callers to select the mode. Note that the exclusive groups and
non-exclusive groups of contexts will respect each other in a manner
similar to that of reader-writer locks. Therefore, this commit will not
cause any behavioral change to the exclusive groups.
Link: https://lkml.kernel.org/r/20220228081314.5770-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220228081314.5770-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before DAMON is merged in the mainline, the concept of 'regions update
interval' has generalized to be used as the time interval for update of
any monitoring operations related data structure, but the document has not
updated properly. This commit updates the document for better
consistency.
Link: https://lkml.kernel.org/r/20220222170100.17068-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In DAMON's early development stage before it be merged in the mainline, it
was first designed to work exclusively with Idle page tracking to avoid
any interference between each other. Later, but still before be merged in
the mainline, because Idle page tracking is fully under the control of
sysadmins, we made the resolving of conflict as the responsibility of
sysadmins. The document is not updated for the change, though. This
commit updates the document for that.
Link: https://lkml.kernel.org/r/20220222170100.17068-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Docs/damon: Update documents for better consistency".
Some of DAMON document are not properly updated for latest version. This
patchset updates such parts.
This patch (of 3):
DAMON code calls the low level monitoring primitives implementations the
monitoring operations. The documentation would have no problem at still
calling those primitives implementation because there is no real
difference in the concepts, but making it more consistent with the code
would make it better. This commit therefore convert sentences in the doc
specifically pointing the implementations of the primitives to call it
monitoring operations.
Link: https://lkml.kernel.org/r/20220222170100.17068-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220222170100.17068-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In mm/Makefile has:
obj-$(CONFIG_DAMON) += damon/
So that we don't need 'obj-$(CONFIG_DAMON) :=' in mm/damon/Makefile,
delete it from mm/damon/Makefile.
Link: https://lkml.kernel.org/r/20220221065255.19991-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because DAMON debugfs interface and DAMON-based proactive reclaim are now
using monitoring operations via registration mechanism,
damon_{p,v}a_{target_valid,set_operations}() functions have no user. This
commit clean them up.
Link: https://lkml.kernel.org/r/20220215184603.1479-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON kunit tests for DAMON debugfs interface fails because it still
assumes setting empty monitoring operations makes DAMON debugfs interface
believe the target of the context don't have pid. This commit fixes the
kunit test fails by explicitly setting the context's monitoring operations
with the operations for the physical address space, which let debugfs
knows the target will not have pid.
Link: https://lkml.kernel.org/r/20220215184603.1479-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs interface depends on monitoring operations for virtual
address spaces because it knows if the target has pid or not by seeing if
the context is configured to use one of the virtual address space
monitoring operation functions. We can replace that check with 'enum
damon_ops_id' now, to make it independent. This commit makes the change.
Link: https://lkml.kernel.org/r/20220215184603.1479-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit makes DAMON debugfs interface to select the registered
monitoring operations for the physical address space or virtual address
spaces depending on user requests instead of setting it on its own. Note
that DAMON debugfs interface is still dependent to DAMON_VADDR with this
change, because it is also using its symbol, 'damon_va_target_valid'.
Link: https://lkml.kernel.org/r/20220215184603.1479-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit makes DAMON_RECLAIM to select the registered monitoring
operations for the physical address space instead of setting it on its
own. This allows DAMON_RECLAIM be independent of DAMON_PADDR, but leave
the dependency as is, because it's the only one monitoring operations it
use, and therefore it makes no sense to build DAMON_RECLAIM without
DAMON_PADDR.
Link: https://lkml.kernel.org/r/20220215184603.1479-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit makes the monitoring operations for the physical address space
and virtual address spaces register themselves to DAMON in the
subsys_initcall step. Later, in-kernel DAMON user code can use them via
damon_select_ops() without have to unnecessarily depend on all possible
monitoring operations implementations.
Link: https://lkml.kernel.org/r/20220215184603.1479-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In-kernel DAMON user code like DAMON debugfs interface should set 'struct
damon_operations' of its 'struct damon_ctx' on its own. Therefore, the
client code should depend on all supporting monitoring operations
implementations that it could use. For example, DAMON debugfs interface
depends on both vaddr and paddr, while some of the users are not always
interested in both.
To minimize such unnecessary dependencies, this commit makes the
monitoring operations can be registered by implementing code and then
dynamically selected by the user code without build-time dependency.
Link: https://lkml.kernel.org/r/20220215184603.1479-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Allow DAMON user code independent of monitoring primitives".
In-kernel DAMON user code is required to configure the monitoring context
(struct damon_ctx) with proper monitoring primitives (struct
damon_primitive). This makes the user code dependent to all supporting
monitoring primitives. For example, DAMON debugfs interface depends on
both DAMON_VADDR and DAMON_PADDR, though some users have interest in only
one use case. As more monitoring primitives are introduced, the problem
will be bigger.
To minimize such unnecessary dependency, this patchset makes monitoring
primitives can be registered by the implemnting code and later dynamically
searched and selected by the user code.
In addition to that, this patchset renames monitoring primitives to
monitoring operations, which is more easy to intuitively understand what
it means and how it would be structed.
This patch (of 8):
DAMON has a set of callback functions called monitoring primitives and let
it can be configured with various implementations for easy extension for
different address spaces and usages. However, the word 'primitive' is not
so explicit. Meanwhile, many other structs resembles similar purpose
calls themselves 'operations'. To make the code easier to be understood,
this commit renames 'damon_primitives' to 'damon_operations' before it is
too late to rename.
Link: https://lkml.kernel.org/r/20220215184603.1479-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220215184603.1479-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It will never get a NULL page by pte_page() as discussed in thread [1],
thus remove the redundant page validation to fix below Smatch static
checker warning.
mm/damon/vaddr.c:405 damon_hugetlb_mkold()
warn: 'page' can't be NULL.
[1] https://lore.kernel.org/linux-mm/20220106091200.GA14564@kili/
Link: https://lkml.kernel.org/r/6d32f7d201b8970d53f51b6c5717d472aed2987c.1642386715.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON asks each monitoring target ('struct damon_target') to have one
'unsigned long' integer called 'id', which should be unique among the
targets of same monitoring context. Meaning of it is, however, totally up
to the monitoring primitives that registered to the monitoring context.
For example, the virtual address spaces monitoring primitives treats the
id as a 'struct pid' pointer.
This makes the code flexible, but ugly, not well-documented, and
type-unsafe[1]. Also, identification of each target can be done via its
index. For the reason, this commit removes the concept and uses clear
type definition. For now, only 'struct pid' pointer is used for the
virtual address spaces monitoring. If DAMON is extended in future so that
we need to put another identifier field in the struct, we will use a union
for such primitives-dependent fields and document which primitives are
using which type.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
Link: https://lkml.kernel.org/r/20211230100723.2238-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
damon_set_targets() function is defined in the core for general use cases,
but called from only dbgfs. Also, because the function is for general use
cases, dbgfs does additional handling of pid type target id case. To make
the situation simpler, this commit moves the function into dbgfs and makes
it to do the pid type case handling on its own.
Link: https://lkml.kernel.org/r/20211230100723.2238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A previous commit made init_regions debugfs file to use target index
instead of target id for specifying the target of the init regions. This
commit updates the usage document to reflect the change.
Link: https://lkml.kernel.org/r/20211230100723.2238-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Remove the type-unclear target id concept".
DAMON asks each monitoring target ('struct damon_target') to have one
'unsigned long' integer called 'id', which should be unique among the
targets of same monitoring context. Meaning of it is, however, totally up
to the monitoring primitives that registered to the monitoring context.
For example, the virtual address spaces monitoring primitives treats the
id as a 'struct pid' pointer.
This makes the code flexible but ugly, not well-documented, and
type-unsafe[1]. Also, identification of each target can be done via its
index. For the reason, this patchset removes the concept and uses clear
type definition.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
This patch (of 4):
Target id is a 'unsigned long' data, which can be interpreted differently
by each monitoring primitives. For example, it means 'struct pid *' for
the virtual address spaces monitoring, while it means nothing but an
integer to be displayed to debugfs interface users for the physical
address space monitoring. It's flexible but makes code ugly and
type-unsafe[1].
To be prepared for eventual removal of the concept, this commit removes a
use case of the concept in 'init_regions' debugfs file handling. In
detail, this commit replaces use of the id with the index of each target
in the context's targets list.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The local variable ret is always 0. Remove it to make code more tight.
Link: https://lkml.kernel.org/r/20220125124833.39718-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow the use of a deferrable timer, which does not force CPU wake-ups
when the system is idle. A consequence is that the sample interval
becomes very unpredictable, to the point that it is not guaranteed that
the KFENCE KUnit test still passes.
Nevertheless, on power-constrained systems this may be preferable, so
let's give the user the option should they accept the above trade-off.
Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
