commit dab4e1f06c upstream.
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ad77e72ca upstream.
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.
A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.
When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.
If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.
The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.
This functionality is useful in containerized environments.
For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.
This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.
As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.
When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 743ad091fb ]
In the commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cd12c6065 ]
syzbot reported the following NULL pointer dereference issue [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:0x0
[...]
Call Trace:
<TASK>
sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230
unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called
concurrently, psock->saved_data_ready can be NULL, causing the above issue.
This patch fixes this issue by calling the appropriate data ready function
using the sk_psock_data_ready() helper and protecting it from concurrency
with sk->sk_callback_lock.
Fixes: 6df7f764cd ("bpf, sockmap: Wake up polling after data copy")
Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1]
Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5f0de6df6 ]
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7d6027790 ("arp: Prevent overflow in arp_req_get().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d09486a04f ]
Mark reports a BUG() when a net namespace is removed.
kernel BUG at net/core/dev.c:11520!
Physical interfaces moved outside of init_net get "refunded"
to init_net when that namespace disappears. The main interface
name may get overwritten in the process if it would have
conflicted. We need to also discard all conflicting altnames.
Recent fixes addressed ensuring that altnames get moved
with the main interface, which surfaced this problem.
Reported-by: Марк Коренберг <socketpair@gmail.com>
Link: https://lore.kernel.org/all/CAEmTpZFZ4Sv3KwqFOY2WKDHeZYdi0O7N5H1nTvcGp=SAEavtDg@mail.gmail.com/
Fixes: 7663d52209 ("net: check for altname conflicts when changing netdev's netns")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a54d51fb2d ]
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.
Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue
In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.
v3: - make sk_busy_loop_end() nicer (Willem)
v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ec4ffd100f upstream.
This reverts commit a4abfa627c.
The patch broke:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
This last command is useful to be able to enslave an interface with only
one netlink message.
After discussion, there is no good reason to support:
> ip link set dummy0 down
> ip link set dummy0 master bond0 up
because the bond interface already set the slave up when it is up.
Cc: stable@vger.kernel.org
Fixes: a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240108094103.2001224-2-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5dc5afff6 ]
We are seeing cases where neigh_cleanup_and_release() is called by
neigh_forced_gc() many times in a row with preemption turned off.
When running on a low powered CPU at a low CPU frequency, this has
been measured to keep preemption off for ~10 ms. That's not great on a
system with HZ=1000 which expects tasks to be able to schedule in
with ~1ms latency.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d6650646c upstream.
I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.
This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr 0000000000000080 by task syz-executor360/5073
Call Trace:
<TASK>
...
sock_hold include/net/sock.h:777 [inline]
unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
sock_map_init_proto net/core/sock_map.c:190 [inline]
sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167
We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com
Fixes: 8866730aed ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8866730aed ]
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.
But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:
[59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
[59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
[...]
[59.905468] Call Trace:
[59.905787] <TASK>
[59.906066] dump_stack_lvl+0x130/0x1d0
[59.908877] print_report+0x16f/0x740
[59.910629] kasan_report+0x118/0x160
[59.912576] sk_wake_async+0x31/0x1b0
[59.913554] sock_def_readable+0x156/0x2a0
[59.914060] unix_stream_sendmsg+0x3f9/0x12a0
[59.916398] sock_sendmsg+0x20e/0x250
[59.916854] skb_send_sock+0x236/0xac0
[59.920527] sk_psock_backlog+0x287/0xaa0
To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.
Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f6ca95d16 ]
Commit 9718475e69 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Fixes: 9718475e69 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3390b30a5 ]
sk->sk_tsflags can be read locklessly, add corresponding annotations.
Fixes: b9f40e21ef ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7f6ca95d16 ("net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24ab059d2e ]
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a56 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cac23b7d76 ]
The following NULL pointer dereference issue occurred:
BUG: kernel NULL pointer dereference, address: 0000000000000000
<...>
RIP: 0010:ccid_hc_tx_send_packet net/dccp/ccid.h:166 [inline]
RIP: 0010:dccp_write_xmit+0x49/0x140 net/dccp/output.c:356
<...>
Call Trace:
<TASK>
dccp_sendmsg+0x642/0x7e0 net/dccp/proto.c:801
inet_sendmsg+0x63/0x90 net/ipv4/af_inet.c:846
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x83/0xe0 net/socket.c:745
____sys_sendmsg+0x443/0x510 net/socket.c:2558
___sys_sendmsg+0xe5/0x150 net/socket.c:2612
__sys_sendmsg+0xa6/0x120 net/socket.c:2641
__do_sys_sendmsg net/socket.c:2650 [inline]
__se_sys_sendmsg net/socket.c:2648 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2648
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x43/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
sk_wait_event() returns an error (-EPIPE) if disconnect() is called on the
socket waiting for the event. However, sk_stream_wait_connect() returns
success, i.e. zero, even if sk_wait_event() returns -EPIPE, so a function
that waits for a connection with sk_stream_wait_connect() may misbehave.
In the case of the above DCCP issue, dccp_sendmsg() is waiting for the
connection. If disconnect() is called in concurrently, the above issue
occurs.
This patch fixes the issue by returning error from sk_stream_wait_connect()
if sk_wait_event() fails.
Fixes: 419ce133ab ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: syzbot+c71bc336c5061153b502@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 705318a99a upstream.
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes: 0091bfc817 ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e03781879a ]
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9aefde5b ]
Curr pointer should be updated when the sg structure is shifted.
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb44ad4e63 ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4eee56e14 ]
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcb ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9beb7e81b ]
1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
can be written from sysfs.
2) tbl->last_flush is read locklessly from neigh_alloc()
3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()
4) neightbl_fill_info() reads cpu stats that can be changed concurrently.
Fixes: c7fb64db00 ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8e15aee621 upstream.
The altname nodes are currently not moved to the new netns
when netdevice itself moves:
[ ~]# ip netns add test
[ ~]# ip -netns test link add name eth0 type dummy
[ ~]# ip -netns test link property add dev eth0 altname some-name
[ ~]# ip -netns test link show dev some-name
2: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip -netns test link set dev eth0 netns 1
[ ~]# ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip li show dev some-name
Device "some-name" does not exist.
Remove them from the hash table when device is unlisted
and add back when listed again.
Fixes: 36fbf1e52b ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 419ce133ab ]
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7663d52209 upstream.
It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:
[ ~]$ ip link add dev eth0 type dummy
[ ~]$ ip netns add test
[ ~]$ ip -netns test link add dev ethX netns test type dummy
[ ~]$ ip -netns test link property add dev ethX altname eth0
[ ~]$ ip -netns test link set dev ethX netns 1
[ ~]$ ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
...
5: ethX: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
altname eth0
Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.
Fixes: 36fbf1e52b ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 311cca4066 upstream.
dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.
Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:
5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff
[ ~]# ip link set dev eth0 netns 1 name eth1
ip monitor inside netns:
Deleted inet eth0
Deleted inet6 eth0
Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7
Name is reported as eth1 in old netns for ifindex 5, already renamed.
Fixes: d90310243f ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a83f4a7c1 upstream.
Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.
Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.
Fixes: ff92741270 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d30162f35 upstream.
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26c29961b1 ]
syzbot uses panic_on_warn.
This means that the skb_dump() I added in the blamed commit are
not even called.
Rewrite this so that we get the needed skb dump before syzbot crashes.
Fixes: eeee4b77dc ("net: add more debug info in skb_checksum_help()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231006173355.2254983-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5baa0433a1 ]
n->output field can be read locklessly, while a writer
might change the pointer concurrently.
Add missing annotations to prevent load-store tearing.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09eed1192c ]
rcu_bh is no longer a win, especially for objects freed
with standard call_rcu().
Switch neighbour code to no longer disable BH when not necessary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5baa0433a1 ("neighbour: fix data-races around n->output")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b071af5235 ]
We have many lockless accesses to n->nud_state.
Before adding another one in the following patch,
add annotations to readers and writers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5baa0433a1 ("neighbour: fix data-races around n->output")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31de4105f0 ]
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
Stable-dep-of: 5baa0433a1 ("neighbour: fix data-races around n->output")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25563b581b ]
While looking at a related syzbot report involving neigh_periodic_work(),
I found that I forgot to add an annotation when deleting an
RCU protected item from a list.
Readers use rcu_deference(*np), we need to use either
rcu_assign_pointer() or WRITE_ONCE() on writer side
to prevent store tearing.
I use rcu_assign_pointer() to have lockdep support,
this was the choice made in neigh_flush_dev().
Fixes: 767e97e1e0 ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b80e31baa4 ]
With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages
sent from one TCP socket (s1) to actually egress from another TCP
socket (s2):
tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg
tcp_bpf_send_verdict(s1) // __SK_REDIRECT case
tcp_bpf_sendmsg_redir(s2)
tcp_bpf_push_locked(s2)
tcp_bpf_push(s2)
tcp_rate_check_app_limited(s2) // expects tcp_sock
tcp_sendmsg_locked(s2) // ditto
There is a hard-coded assumption in the call-chain, that the egress
socket (s2) is a TCP socket.
However in commit 122e6c79ef ("sock_map: Update sock type checks for
UDP") we have enabled redirects to non-TCP sockets. This was done for the
sake of BPF sk_skb programs. There was no indention to support sk_msg
send-to-egress use case.
As a result, attempts to send-to-egress through a non-TCP socket lead to a
crash due to invalid downcast from sock to tcp_sock:
BUG: kernel NULL pointer dereference, address: 000000000000002f
...
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x1f/0x70
? page_fault_oops+0x80/0x160
? do_user_addr_fault+0x2d7/0x800
? rcu_is_watching+0x11/0x50
? exc_page_fault+0x70/0x1c0
? asm_exc_page_fault+0x27/0x30
? tcp_tso_segs+0x14/0xa0
tcp_write_xmit+0x67/0xce0
__tcp_push_pending_frames+0x32/0xf0
tcp_push+0x107/0x140
tcp_sendmsg_locked+0x99f/0xbb0
tcp_bpf_push+0x19d/0x3a0
tcp_bpf_sendmsg_redir+0x55/0xd0
tcp_bpf_send_verdict+0x407/0x550
tcp_bpf_sendmsg+0x1a1/0x390
inet_sendmsg+0x6a/0x70
sock_sendmsg+0x9d/0xc0
? sockfd_lookup_light+0x12/0x80
__sys_sendto+0x10e/0x160
? syscall_enter_from_user_mode+0x20/0x60
? __this_cpu_preempt_check+0x13/0x20
? lockdep_hardirqs_on+0x82/0x110
__x64_sys_sendto+0x1f/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg
program to prevent the crash. When attempted, user will receive an EACCES
error from send/sendto/sendmsg() syscall.
Fixes: 122e6c79ef ("sock_map: Update sock type checks for UDP")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230920102055.42662-1-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8936bf53a0 ]
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") started
applying strict rules to standard string functions.
It does not work well with conventional socket code around each protocol-
specific sockaddr_XXX struct, which is cast from sockaddr_storage and has
a bigger size than fortified functions expect. See these commits:
commit 06d4c8a808 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
commit ecb4534b6a ("af_unix: Terminate sun_path when bind()ing pathname socket.")
commit a0ade8404c ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
We must cast the protocol-specific address back to sockaddr_storage
to call such functions.
However, in the case of getsockaddr(SO_PEERNAME), the rationale is a bit
unclear as the buffer is defined by char[128] which is the same size as
sockaddr_storage.
Let's use sockaddr_storage explicitly.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b192812905 ]
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit cc04410af7 ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a454d84ee2 ]
There is a race where skb's from the sk_psock_backlog can be referenced
after userspace side has already skb_consumed() the sk_buff and its refcnt
dropped to zer0 causing use after free.
The flow is the following:
while ((skb = skb_peek(&psock->ingress_skb))
sk_psock_handle_Skb(psock, skb, ..., ingress)
if (!ingress) ...
sk_psock_skb_ingress
sk_psock_skb_ingress_enqueue(skb)
msg->skb = skb
sk_psock_queue_msg(psock, msg)
skb_dequeue(&psock->ingress_skb)
The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is
what the application reads when recvmsg() is called. An application can
read this anytime after the msg is placed on the queue. The recvmsg hook
will also read msg->skb and then after user space reads the msg will call
consume_skb(skb) on it effectively free'ing it.
But, the race is in above where backlog queue still has a reference to
the skb and calls skb_dequeue(). If the skb_dequeue happens after the
user reads and free's the skb we have a use after free.
The !ingress case does not suffer from this problem because it uses
sendmsg_*(sk, msg) which does not pass the sk_buff further down the
stack.
The following splat was observed with 'test_progs -t sockmap_listen':
[ 1022.710250][ T2556] general protection fault, ...
[...]
[ 1022.712830][ T2556] Workqueue: events sk_psock_backlog
[ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80
[ 1022.713653][ T2556] Code: ...
[...]
[ 1022.720699][ T2556] Call Trace:
[ 1022.720984][ T2556] <TASK>
[ 1022.721254][ T2556] ? die_addr+0x32/0x80^M
[ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0
[ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30
[ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80
[ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300
[ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0
[ 1022.723633][ T2556] worker_thread+0x4f/0x3a0
[ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10
[ 1022.724386][ T2556] kthread+0xfd/0x130
[ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725066][ T2556] ret_from_fork+0x2d/0x50
[ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30
[ 1022.726201][ T2556] </TASK>
To fix we add an skb_get() before passing the skb to be enqueued in the
engress queue. This bumps the skb->users refcnt so that consume_skb()
and kfree_skb will not immediately free the sk_buff. With this we can
be sure the skb is still around when we do the dequeue. Then we just
need to decrement the refcnt or free the skb in the backlog case which
we do by calling kfree_skb() on the ingress case as well as the sendmsg
case.
Before locking change from fixes tag we had the sock locked so we
couldn't race with user and there was no issue here.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Xu Kuohai <xukuohai@huawei.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e6300e7b3 ]
Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().
Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d58f046c ]
inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.
Fixes: 292e6077b0 ("net: introduce sk_forward_alloc_get()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 915d975b2f upstream.
Blamed commit changed:
ptr = kmalloc(size);
if (ptr)
size = ksize(ptr);
to:
size = kmalloc_size_roundup(size);
ptr = kmalloc(size);
This allowed various crash as reported by syzbot [1]
and Kyle Zeng.
Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.
kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.
kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.
Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff
We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).
This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.
[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554
CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584
Fixes: 12d6c1d3a2 ("skbuff: Proactively round up to kmalloc bucket size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Ajay: Regenerated the patch for v6.1.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>