Change mock_domain to supporting dirty tracking and add tests to exercise
the new SET_DIRTY_TRACKING API in the iommufd_dirty_tracking selftest
fixture.
Link: https://lore.kernel.org/r/20231024135109.73787-16-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to selftest the iommu domain dirty enforcing implement the
mock_domain necessary support and add a new dev_flags to test that the
hwpt_alloc/attach_device fails as expected.
Expand the existing mock_domain fixture with a enforce_dirty test that
exercises the hwpt_alloc and device attachment.
Link: https://lore.kernel.org/r/20231024135109.73787-15-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expand mock_domain test to be able to manipulate the device capabilities.
This allows testing with mockdev without dirty tracking support advertised
and thus make sure enforce_dirty test does the expected.
To avoid breaking IOMMUFD_TEST UABI replicate the mock_domain struct and
thus add an input dev_flags at the end.
Link: https://lore.kernel.org/r/20231024135109.73787-14-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IOMMU advertises Access/Dirty bits for second-stage page table if the
extended capability DMAR register reports it (ECAP, mnemonic ECAP.SSADS).
The first stage table is compatible with CPU page table thus A/D bits are
implicitly supported. Relevant Intel IOMMU SDM ref for first stage table
"3.6.2 Accessed, Extended Accessed, and Dirty Flags" and second stage table
"3.7.2 Accessed and Dirty Flags".
First stage page table is enabled by default so it's allowed to set dirty
tracking and no control bits needed, it just returns 0. To use SSADS, set
bit 9 (SSADE) in the scalable-mode PASID table entry and flush the IOTLB
via pasid_flush_caches() following the manual. Relevant SDM refs:
"3.7.2 Accessed and Dirty Flags"
"6.5.3.3 Guidance to Software for Invalidations,
Table 23. Guidance to Software for Invalidations"
PTE dirty bit is located in bit 9 and it's cached in the IOTLB so flush
IOTLB to make sure IOMMU attempts to set the dirty bit again. Note that
iommu_dirty_bitmap_record() will add the IOVA to iotlb_gather and thus the
caller of the iommu op will flush the IOTLB. Relevant manuals over the
hardware translation is chapter 6 with some special mention to:
"6.2.3.1 Scalable-Mode PASID-Table Entry Programming Considerations"
"6.2.4 IOTLB"
Select IOMMUFD_DRIVER only if IOMMUFD is enabled, given that IOMMU dirty
tracking requires IOMMUFD.
Link: https://lore.kernel.org/r/20231024135109.73787-13-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IOMMU advertises Access/Dirty bits if the extended feature register reports
it. Relevant AMD IOMMU SDM ref[0] "1.3.8 Enhanced Support for Access and
Dirty Bits"
To enable it set the DTE flag in bits 7 and 8 to enable access, or
access+dirty. With that, the IOMMU starts marking the D and A flags on
every Memory Request or ATS translation request. It is on the VMM side to
steer whether to enable dirty tracking or not, rather than wrongly doing in
IOMMU. Relevant AMD IOMMU SDM ref [0], "Table 7. Device Table Entry (DTE)
Field Definitions" particularly the entry "HAD".
To actually toggle on and off it's relatively simple as it's setting 2 bits
on DTE and flush the device DTE cache.
To get what's dirtied use existing AMD io-pgtable support, by walking the
pagetables over each IOVA, with fetch_pte(). The IOTLB flushing is left to
the caller (much like unmap), and iommu_dirty_bitmap_record() is the one
adding page-ranges to invalidate. This allows caller to batch the flush
over a big span of IOVA space, without the iommu wondering about when to
flush.
Worthwhile sections from AMD IOMMU SDM:
"2.2.3.1 Host Access Support"
"2.2.3.2 Host Dirty Support"
For details on how IOMMU hardware updates the dirty bit see, and expects
from its consequent clearing by CPU:
"2.2.7.4 Updating Accessed and Dirty Bits in the Guest Address Tables"
"2.2.7.5 Clearing Accessed and Dirty Bits"
Quoting the SDM:
"The setting of accessed and dirty status bits in the page tables is
visible to both the CPU and the peripheral when sharing guest page tables.
The IOMMU interlocked operations to update A and D bits must be 64-bit
operations and naturally aligned on a 64-bit boundary"
.. and for the IOMMU update sequence to Dirty bit, essentially is states:
1. Decodes the read and write intent from the memory access.
2. If P=0 in the page descriptor, fail the access.
3. Compare the A & D bits in the descriptor with the read and write
intent in the request.
4. If the A or D bits need to be updated in the descriptor:
* Start atomic operation.
* Read the descriptor as a 64-bit access.
* If the descriptor no longer appears to require an update, release the
atomic lock with
no further action and continue to step 5.
* Calculate the new A & D bits.
* Write the descriptor as a 64-bit access.
* End atomic operation.
5. Continue to the next stage of translation or to the memory access.
Access/Dirty bits readout also need to consider the non-default page-sizes
(aka replicated PTEs as mentined by manual), as AMD supports all powers of
two (except 512G) page sizes.
Select IOMMUFD_DRIVER only if IOMMUFD is enabled considering that IOMMU
dirty tracking requires IOMMUFD.
Link: https://lore.kernel.org/r/20231024135109.73787-12-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the domain_alloc_user op implementation. To that end, refactor
amd_iommu_domain_alloc() to receive a dev pointer and flags, while renaming
it too, such that it becomes a common function shared with
domain_alloc_user() implementation. The sole difference with
domain_alloc_user() is that we initialize also other fields that
iommu_domain_alloc() does. It lets it return the iommu domain correctly
initialized in one function.
This is in preparation to add dirty enforcement on AMD implementation of
domain_alloc_user.
Link: https://lore.kernel.org/r/20231024135109.73787-11-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
VFIO has an operation where it unmaps an IOVA while returning a bitmap with
the dirty data. In reality the operation doesn't quite query the IO
pagetables that the PTE was dirty or not. Instead it marks as dirty on
anything that was mapped, and doing so in one syscall.
In IOMMUFD the equivalent is done in two operations by querying with
GET_DIRTY_IOVA followed by UNMAP_IOVA. However, this would incur two TLB
flushes given that after clearing dirty bits IOMMU implementations require
invalidating their IOTLB, plus another invalidation needed for the UNMAP.
To allow dirty bits to be queried faster, add a flag
(IOMMU_HWPT_GET_DIRTY_BITMAP_NO_CLEAR) that requests to not clear the dirty
bits from the PTE (but just reading them), under the expectation that the
next operation is the unmap. An alternative is to unmap and just
perpectually mark as dirty as that's the same behaviour as today. So here
equivalent functionally can be provided with unmap alone, and if real dirty
info is required it will amortize the cost while querying.
There's still a race against DMA where in theory the unmap of the IOVA
(when the guest invalidates the IOTLB via emulated iommu) would race
against the VF performing DMA on the same IOVA. As discussed in [0], we are
accepting to resolve this race as throwing away the DMA and it doesn't
matter if it hit physical DRAM or not, the VM can't tell if we threw it
away because the DMA was blocked or because we failed to copy the DRAM.
[0] https://lore.kernel.org/linux-iommu/20220502185239.GR8364@nvidia.com/
Link: https://lore.kernel.org/r/20231024135109.73787-10-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend IOMMUFD_CMD_GET_HW_INFO op to query generic iommu capabilities for a
given device.
Capabilities are IOMMU agnostic and use device_iommu_capable() API passing
one of the IOMMU_CAP_*. Enumerate IOMMU_CAP_DIRTY_TRACKING for now in the
out_capabilities field returned back to userspace.
Link: https://lore.kernel.org/r/20231024135109.73787-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Connect a hw_pagetable to the IOMMU core dirty tracking
read_and_clear_dirty iommu domain op. It exposes all of the functionality
for the UAPI that read the dirtied IOVAs while clearing the Dirty bits from
the PTEs.
In doing so, add an IO pagetable API iopt_read_and_clear_dirty_data() that
performs the reading of dirty IOPTEs for a given IOVA range and then
copying back to userspace bitmap.
Underneath it uses the IOMMU domain kernel API which will read the dirty
bits, as well as atomically clearing the IOPTE dirty bit and flushing the
IOTLB at the end. The IOVA bitmaps usage takes care of the iteration of the
bitmaps user pages efficiently and without copies. Within the iterator
function we iterate over io-pagetable contigous areas that have been
mapped.
Contrary to past incantation of a similar interface in VFIO the IOVA range
to be scanned is tied in to the bitmap size, thus the application needs to
pass a appropriately sized bitmap address taking into account the iova
range being passed *and* page size ... as opposed to allowing bitmap-iova
!= iova.
Link: https://lore.kernel.org/r/20231024135109.73787-8-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Every IOMMU driver should be able to implement the needed iommu domain ops
to control dirty tracking.
Connect a hw_pagetable to the IOMMU core dirty tracking ops, specifically
the ability to enable/disable dirty tracking on an IOMMU domain
(hw_pagetable id). To that end add an io_pagetable kernel API to toggle
dirty tracking:
* iopt_set_dirty_tracking(iopt, [domain], state)
The intended caller of this is via the hw_pagetable object that is created.
Internally it will ensure the leftover dirty state is cleared /right
before/ dirty tracking starts. This is also useful for iommu drivers which
may decide that dirty tracking is always-enabled at boot without wanting to
toggle dynamically via corresponding iommu domain op.
Link: https://lore.kernel.org/r/20231024135109.73787-7-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Throughout IOMMU domain lifetime that wants to use dirty tracking, some
guarantees are needed such that any device attached to the iommu_domain
supports dirty tracking.
The idea is to handle a case where IOMMU in the system are assymetric
feature-wise and thus the capability may not be supported for all devices.
The enforcement is done by adding a flag into HWPT_ALLOC namely:
IOMMU_HWPT_ALLOC_DIRTY_TRACKING
.. Passed in HWPT_ALLOC ioctl() flags. The enforcement is done by creating
a iommu_domain via domain_alloc_user() and validating the requested flags
with what the device IOMMU supports (and failing accordingly) advertised).
Advertising the new IOMMU domain feature flag requires that the individual
iommu driver capability is supported when a future device attachment
happens.
Link: https://lore.kernel.org/r/20231024135109.73787-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add to iommu domain operations a set of callbacks to perform dirty
tracking, particulary to start and stop tracking and to read and clear the
dirty data.
Drivers are generally expected to dynamically change its translation
structures to toggle the tracking and flush some form of control state
structure that stands in the IOVA translation path. Though it's not
mandatory, as drivers can also enable dirty tracking at boot, and just
clear the dirty bits before setting dirty tracking. For each of the newly
added IOMMU core APIs:
iommu_cap::IOMMU_CAP_DIRTY_TRACKING: new device iommu_capable value when
probing for capabilities of the device.
.set_dirty_tracking(): an iommu driver is expected to change its
translation structures and enable dirty tracking for the devices in the
iommu_domain. For drivers making dirty tracking always-enabled, it should
just return 0.
.read_and_clear_dirty(): an iommu driver is expected to walk the pagetables
for the iova range passed in and use iommu_dirty_bitmap_record() to record
dirty info per IOVA. When detecting that a given IOVA is dirty it should
also clear its dirty state from the PTE, *unless* the flag
IOMMU_DIRTY_NO_CLEAR is passed in -- flushing is steered from the caller of
the domain_op via iotlb_gather. The iommu core APIs use the same data
structure in use for dirty tracking for VFIO device dirty (struct
iova_bitmap) abstracted by iommu_dirty_bitmap_record() helper function.
domain::dirty_ops: IOMMU domains will store the dirty ops depending on
whether the iommu device supports dirty tracking or not. iommu drivers can
then use this field to figure if the dirty tracking is supported+enforced
on attach. The enforcement is enable via domain_alloc_user() which is done
via IOMMUFD hwpt flag introduced later.
Link: https://lore.kernel.org/r/20231024135109.73787-5-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the IOVA bitmap exported symbols adhere to the IOMMUFD symbol
export convention i.e. using the IOMMUFD namespace. In doing so,
import the namespace in the current users. This means VFIO and the
vfio-pci drivers that use iova_bitmap_set().
Link: https://lore.kernel.org/r/20231024135109.73787-4-joao.m.martins@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create the symbol IOMMUFD_DRIVER which designates the builtin code that
will be used by drivers when selected. Today this means MLX5_VFIO_PCI and
PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when
supporting dirty tracking and select IOMMUFD_DRIVER accordingly.
Given that the symbol maybe be disabled, add header definitions in
iova_bitmap.h for when IOMMUFD_DRIVER=n
Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation to move iova_bitmap into iommufd, export the rest of API
symbols that will be used in what could be used by modules, namely:
iova_bitmap_alloc
iova_bitmap_free
iova_bitmap_for_each
Link: https://lore.kernel.org/r/20231024135109.73787-2-joao.m.martins@oracle.com
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IOMMU_HWPT_ALLOC_NEST_PARENT flag is used to allocate a HWPT. Though
a HWPT holds a domain in the core structure, it is still quite confusing
to describe it using "domain" in the uAPI kdoc. Correct it to "HWPT".
Fixes: 4ff5421633 ("iommufd: Support allocating nested parent domain")
Link: https://lore.kernel.org/r/20231017181552.12667-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
TEST_LENGTH passing ".size = sizeof(struct _struct) - 1" expects -EINVAL
from "if (ucmd.user_size < op->min_size)" check in iommufd_fops_ioctl().
This has been working when min_size is exactly the size of the structure.
However, if the size of the structure becomes larger than min_size, i.e.
the passing size above is larger than min_size, that min_size sanity no
longer works.
Since the first test in TEST_LENGTH() was to test that min_size sanity
routine, rework it to support a min_size calculation, rather than using
the full size of the structure.
Link: https://lore.kernel.org/r/20231015074648.24185-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the domain_alloc_user() op implementation. It supports allocating
domains to be used as parent under nested translation.
Unlike other drivers VT-D uses only a single page table format so it only
needs to check if the HW can support nesting.
Link: https://lore.kernel.org/r/20230928071528.26258-7-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add mock_domain_alloc_user() and a new test case for
IOMMU_HWPT_ALLOC_NEST_PARENT.
Link: https://lore.kernel.org/r/20230928071528.26258-6-yi.l.liu@intel.com
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend IOMMU_HWPT_ALLOC to allocate domains to be used as parent (stage-2)
in nested translation.
Add IOMMU_HWPT_ALLOC_NEST_PARENT to the uAPI.
Link: https://lore.kernel.org/r/20230928071528.26258-5-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extends iommufd_hw_pagetable_alloc() to accept user flags, the uAPI will
provide the flags.
Link: https://lore.kernel.org/r/20230928071528.26258-4-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make IOMMUFD use iommu_domain_alloc_user() by default for iommu_domain
creation. IOMMUFD needs to support iommu_domain allocation with parameters
from userspace in nested support, and a driver is expected to implement
everything under this op.
If the iommu driver doesn't provide domain_alloc_user callback then
IOMMUFD falls back to use iommu_domain_alloc() with an UNMANAGED type if
possible.
Link: https://lore.kernel.org/r/20230928071528.26258-3-yi.l.liu@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce a new iommu_domain op to create domains owned by userspace,
e.g. through IOMMUFD. These domains have a few different properties
compares to kernel owned domains:
- They may be PAGING domains, but created with special parameters.
For instance aperture size changes/number of levels, different
IOPTE formats, or other things necessary to make a vIOMMU work
- We have to track all the memory allocations with GFP_KERNEL_ACCOUNT
to make the cgroup sandbox stronger
- Device-specialty domains, such as NESTED domains can be created by
IOMMUFD.
The new op clearly says the domain is being created by IOMMUFD, that the
domain is intended for userspace use, and it provides a way to pass user
flags or a driver specific uAPI structure to customize the created domain
to exactly what the vIOMMU userspace driver requires.
iommu drivers that cannot support VFIO/IOMMUFD should not support this
op. This includes any driver that cannot provide a fully functional PAGING
domain.
This new op for now is only supposed to be used by IOMMUFD, hence no
wrapper for it. IOMMUFD would call the callback directly. As for domain
free, IOMMUFD would use iommu_domain_free().
Link: https://lore.kernel.org/r/20230928071528.26258-2-yi.l.liu@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The point in iterating variant->mock_domains is to test the idev_ids[0]
and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only.
Link: https://lore.kernel.org/r/20230919011637.16483-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix an UV boot crash,
- Skip spurious ENDBR generation on _THIS_IP_,
- Fix ENDBR use in putuser() asm methods,
- Fix corner case boot crashes on 5-level paging,
- and fix a false positive WARNING on LTO kernels.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BMjT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
balancing bug, and a topology setup bug on (Intel) hybrid processors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jIeN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f9 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e16 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=WtnH
-----END PGP SIGNATURE-----
Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
=DopS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:
$ readelf -S purgatory.ro | grep " .text"
[ 1] .text PROGBITS 0000000000000000 00000040
[ 7] .text.purgatory PROGBITS 0000000000000000 000020e0
[ 9] .text.warn PROGBITS 0000000000000000 000021c0
[13] .text.sha256_upda PROGBITS 0000000000000000 000022f0
[15] .text.sha224_upda PROGBITS 0000000000000000 00002be0
[17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0
[19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0
This causes WARNING from kexec_purgatory_setup_sechdrs():
WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
kexec_load_purgatory+0x37f/0x390
Fix this by disabling LTO for purgatory.
[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]
We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.
Fixes: b33fff07e3 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
-----BEGIN PGP SIGNATURE-----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=2LRy
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
Commit 408579cd62 ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).
That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded". After the change, it's always 0 for success, and the lock
will have been released if requested).
This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value
test fairly subtle, since everything continues to work.
Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.
Revert that one line of the change back to the original logic.
Fixes: 408579cd62 ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 small(ish) fixes all in drivers. The major fixes are in pm8001
(fixes MSI-X issue going back to its origin), the qla2xxx endianness
fix, which fixes a bug on big endian and the lpfc ones which can cause
an oops on module removal without them.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZQXNvyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRKxAP4kCOBR
UOGLJJdhmotofj9GX0Rr1qAFheJmTSAT6ctAOgD+IWucKDqKfbRLbmzqiSvmWmul
P0STz4VnUKs9LqdLyok=
=3wre
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"16 small(ish) fixes all in drivers.
The major fixes are in pm8001 (fixes MSI-X issue going back to its
origin), the qla2xxx endianness fix, which fixes a bug on big endian
and the lpfc ones which can cause an oops on module removal without
them"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports
scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
scsi: target: core: Fix target_cmd_counter leak
scsi: pm8001: Setup IRQs on resume
scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
scsi: qedf: Add synchronization between I/O completions and abort
scsi: target: Replace strlcpy() with strscpy()
scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir()
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
scsi: qla2xxx: Correct endianness for rqstlen and rsplen
scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
scsi: megaraid_sas: Fix deadlock on firmware crashdump
- Fix link power management transitions to disallow unsupported
states (Niklas).
- A small string handling fix for the sata_mv driver (Christophe).
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying). Followup fixes for this one are to not
clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to
continue on with other actions recorded with error interrupts
triggered before EH completes. A~Nd an additional fix to avoid
thawing a port twice in EH (Niklas).
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me).
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation
(Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZQWcYAAKCRDdoc3SxdoY
dg0HAQDxkfzueH5T00LSsg9+jI73eMScmC7asR3cbwmEiTRATgEAxpWUgaR7e7YP
ZM9XWTyfcCYTfAEaJduS5a6ThHl3pAI=
=gTtf
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxmwCcDS42Mt0fXkxsjzJy4KCNSCNEvcYAoJ/wfVw7
K2NylIy78y0PEvO4i0H9
=8qKC
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1"
* tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer dereference
Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXxA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymPaQCgg34ErWYWTR2q/uCf4cpBce0q2xAAn226mZ6f
Tt90d/o0lXnhtV8mXnWm
=3Ye9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems"
* tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V
driver core: return an error when dev_set_name() hasn't happened
Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all. To fix this, the Kconfig change needs to be reverted and
a future set of fixes for the ioport dependancies will show up in
6.7-rc1 (there's no rush for them.)
This has been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWYWg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylW2ACdGSq8skVr8qCcaQ7z1nbrc/HWcXgAoKxrP53E
08QGj1NOD8cqWIcClQfg
=dvIN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all.
To fix this, the Kconfig change needs to be reverted and a future set
of fixes for the ioport dependancies will show up in 6.7-rc1 (there's
no rush for them.)
This has been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "comedi: add HAS_IOPORT dependencies"
are converted now. Thanks Uwe, this marks the end of a long conversion
process. Other than that, we have a few Kconfig updates and driver
bugfixes.
-----BEGIN PGP SIGNATURE-----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=hFC5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The main thing is the removal of 'probe_new' because all i2c client
drivers are converted now. Thanks Uwe, this marks the end of a long
conversion process.
Other than that, we have a few Kconfig updates and driver bugfixes"
* tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Fix the kernel-doc warnings
i2c: aspeed: Reset the i2c controller when timeout occurs
i2c: I2C_MLXCPLD on ARM64 should depend on ACPI
i2c: Make I2C_ATR invisible
i2c: Drop legacy callback .probe_new()
w1: ds2482: Switch back to use struct i2c_driver's .probe()
Currently, we fetch sense data for a _successful_ command if either:
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
This means that case 2) will trigger for a non-NCQ command which has
ATA_SENSE bit set, regardless if CDL is enabled or not.
This decision was by design. If the device reports that it has sense data
available, it makes sense to fetch that sense data, since the sk/asc/ascq
could be important information regardless if CDL is enabled or not.
However, the fetching of sense data for a successful command is done via
ATA EH. Considering how intricate the ATA EH is, we really do not want to
invoke ATA EH unless absolutely needed.
Before commit 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL
commands using policy 0xD") we never fetched sense data for successful
commands.
In order to not invoke the ATA EH unless absolutely necessary, even if the
device claims support for sense data reporting, only fetch sense data for
successful (NCQ and non-NCQ commands) commands that are using CDL.
[Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL
instead of the device support for CDL, which is implied for commands
using CDL.
Fixes: 3ac873c76d ("ata: libata-core: fix when to fetch sense data for successful commands")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
commit 1e641060c4 ("libata: clear eh_info on reset completion") added
a workaround that broke the retry mechanism in ATA EH.
Tejun himself suggested to remove this workaround when it was identified
to cause additional problems:
https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/
He even said:
"Hmm... it seems I wasn't thinking straight when I added that work around."
https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/
While removing the workaround solved the issue, however, the workaround was
kept to avoid "spurious hotplug events during reset", and instead another
workaround was added on top of the existing workaround in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Because these IRQs happened when the port was frozen, we know that they
were actually a side effect of PxIS and IS.IPS(x) not being cleared before
the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear
pending interrupt status"), so these workarounds can now be removed.
Since commit 1e641060c4 ("libata: clear eh_info on reset completion") has
now been reverted, the ATA EH retry mechanism is functional again, so there
is once again no need to thaw the port more than once in ata_eh_reset().
This reverts "the workaround on top of the workaround" introduced in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3 ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This kselftest fixes update for Linux 6.6-rc2 consists of important
fixes to user_events test and ftrace test.
user_events test has been enabled for default run in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- adds checks for dependencies and skips the test. user_events test
requires root access, and tracefs and user_events enabled. It leaves
tracefs mounted and a fix is in progress for that missing piece.
- creates user_events test-specific Kconfig fragments.
ftrace test fixes:
- unmounts tracefs for recovering environment. Fix identified during the
above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage.
-----BEGIN PGP SIGNATURE-----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=HdKU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
- Use correct order when encoding NFSv4 RENAME change_info
- Fix a potential oops during NFSD shutdown
-----BEGIN PGP SIGNATURE-----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=ZTRy
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Use correct order when encoding NFSv4 RENAME change_info
- Fix a potential oops during NFSD shutdown
* tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix possible oops when nfsd/pool_stats is closed.
nfsd: fix change_info in NFSv4 RENAME replies
Fix the handling of block devices in the test_resume mode of
hibernation (Chen Yu).
-----BEGIN PGP SIGNATURE-----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=3TcT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the handling of block devices in the test_resume mode of
hibernation (Chen Yu)"
* tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix the exclusive get block device in test_resume mode
PM: hibernate: Rename function parameter from snapshot_test to exclusive
