With ISO 15765-2:2016 the PDU size is not limited to 2^12 - 1 (4095)
bytes but can be represented as a 32 bit unsigned integer value which
allows 2^32 - 1 bytes (~4GB). The use-cases like automotive unified
diagnostic services (UDS) and flashing of ECUs still use the small
static buffers which are provided at socket creation time.
When a use-case requires to transfer PDUs up to 1025 kByte the maximum
PDU size can now be extended by setting the module parameter
max_pdu_size. The extended size buffers are only allocated on a
per-socket/connection base when needed at run-time.
changes since v2: https://lore.kernel.org/all/20230313172510.3851-1-socketcan@hartkopp.net
- use ARRAY_SIZE() to reference DEFAULT_MAX_PDU_SIZE only at one place
changes since v1: https://lore.kernel.org/all/20230311143446.3183-1-socketcan@hartkopp.net
- limit the minimum 'max_pdu_size' to 4095 to maintain the classic
behavior before ISO 15765-2:2016
Link: https://github.com/raspberrypi/linux/issues/5371
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230326115911.15094-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQhRSETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Ap9B/kB0/KPmJuPw8uhCcZV0LqzRHeitJU/
iTGCNX0yxE9k2MuBZJBdk/j1mis9aD0l1K3QAHz5kUNNE1i1LR6ljvbazjJBw/5/
jVPi4zUm1bvveMYLvL7bpin1wc4UsbGHaFAfSLENfPVkB8gHMWOCOMKbdqcJ/utk
bpTn6vW3YZRlw6wcKykig73lPKiVrBs5HDVKMFb40vhTtPZs41a9jNksupXOUgzL
4oQq97BeItzgOWrttocMnF68WA+8gYvS8d5Y85qr1cpEwfi4vbLHb063+TItZYfF
5JlueeoavQDwSnwH6bGuEIa/SzoGfOqrXlVg6Slse393RRrK8jTE2AoX
=CY8n
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-03-27
The first 2 patches by Geert Uytterhoeven add transceiver support and
improve the error messages in the rcar_canfd driver.
Cai Huoqing contributes 3 patches which remove a redundant call to
pci_clear_master() in the c_can, ctucanfd and kvaser_pciefd driver.
Frank Jungclaus's patch replaces the struct esd_usb_msg with a union
in the esd_usb driver to improve readability.
Markus Schneider-Pargmann contributes 5 patches to improve the
performance in the m_can driver, especially for SPI attached
controllers like the tcan4x5x.
* tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: Keep interrupts enabled during peripheral read
can: m_can: Disable unused interrupts
can: m_can: Remove double interrupt enable
can: m_can: Always acknowledge all interrupts
can: m_can: Remove repeated check for is_peripheral
can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union
can: kvaser_pciefd: Remove redundant pci_clear_master
can: ctucanfd: Remove redundant pci_clear_master
can: c_can: Remove redundant pci_clear_master
can: rcar_canfd: Improve error messages
can: rcar_canfd: Add transceiver support
====================
Link: https://lore.kernel.org/r/20230327073354.1003134-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin says:
====================
Add tx push buf len param to ethtool
This patchset adds a new sub-configuration to ethtool get/set queue
params (ethtool -g) called 'tx-push-buf-len'.
This configuration specifies the maximum number of bytes of a
transmitted packet a driver can push directly to the underlying
device ('push' mode). The motivation for pushing some of the bytes to
the device has the advantages of
- Allowing a smart device to take fast actions based on the packet's
header
- Reducing latency for small packets that can be copied completely into
the device
This new param is practically similar to tx-copybreak value that can be
set using ethtool's tunable but conceptually serves a different purpose.
While tx-copybreak is used to reduce the overhead of DMA mapping and
makes no sense to use if less than the whole segment gets copied,
tx-push-buf-len allows to improve performance by analyzing the packet's
data (usually headers) before performing the DMA operation.
The configuration can be queried and set using the commands:
$ ethtool -g [interface]
# ethtool -G [interface] tx-push-buf-len [number of bytes]
This patchset also adds support for the new configuration in ENA driver
for which this parameter ensures efficient resources management on the
device side.
====================
Link: https://lore.kernel.org/r/20230323163610.1281468-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LLQ is auto enabled by the device and disabling it isn't supported on
new ENA generations while on old ones causes sub-optimal performance.
This patch adds advertisement of push-mode when LLQ mode is used, but
rejects an attempt to modify it.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver allows for two distinct values for the number of bytes
of the packet's payload that can be written directly to the device.
For a value of 224 the driver turns on Large LLQ Header mode in which
the first 224 of the packet's payload are written to the LLQ.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the ability to modify LLQ entry size, the size of packet's
payload that can be written directly to the device changes.
This patch makes the driver recalculate this information every device
negotiation (also called device reset).
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow configuring the device with large LLQ headers. The Low Latency
Queue (LLQ) allows the driver to write the first N bytes of the packet,
along with the rest of the TX descriptors directly into device (N can be
either 96 or 224 for large LLQ headers configuration).
Having L4 TCP/UDP headers contained in the first 96 bytes of the packet
is required to get maximum performance from the device.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move ena_calc_io_queue_size() implementation closer to the file's
beginning so that it can be later called from ena_device_init()
function without adding a function declaration.
Also add an empty line at some spots to separate logical blocks in
funcitons.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to NL_SET_ERR_MSG_FMT, add a macro which sets netlink policy
error message with a format string.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang with W=1 reports
drivers/net/ethernet/qlogic/qed/qed_ll2.c:649:6: error: variable
'num_ooo_add_to_peninsula' set but not used [-Werror,-Wunused-but-set-variable]
u32 num_ooo_add_to_peninsula = 0, cid;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230326001733.1343274-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, MAX_SKB_FRAGS value is 17.
For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg()
attempts order-3 allocations, stuffing 32768 bytes per frag.
But with zero copy, we use order-0 pages.
For BIG TCP to show its full potential, we add a config option
to be able to fit up to 45 segments per skb.
This is also needed for BIG TCP rx zerocopy, as zerocopy currently
does not support skbs with frag list.
We have used MAX_SKB_FRAGS=45 value for years at Google before
we deployed 4K MTU, with no adverse effect, other than
a recent issue in mlx4, fixed in commit 26782aad00
("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS")
Back then, goal was to be able to receive full size (64KB) GRO
packets without the frag_list overhead.
Note that /proc/sys/net/core/max_skb_frags can also be used to limit
the number of fragments TCP can use in tx packets.
By default we keep the old/legacy value of 17 until we get
more coverage for the updated values.
Sizes of struct skb_shared_info on 64bit arches
MAX_SKB_FRAGS | sizeof(struct skb_shared_info):
==============================================
17 320
21 320+64 = 384
25 320+128 = 448
29 320+192 = 512
33 320+256 = 576
37 320+320 = 640
41 320+384 = 704
45 320+448 = 768
This inflation might cause problems for drivers assuming they could pack
both the incoming packet (for MTU=1500) and skb_shared_info in half a page,
using build_skb().
v3: fix build error when CONFIG_NET=n
v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes the following warning when compiled with GCC 12.2.0 and W=1.
net/core/dev_ioctl.c:475: warning: Function parameter or member 'data'
not described in 'dev_ioctl'
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_clk_get_optional_enabled to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I was a bit too optimistic in commit bf51d27704 ("tools: ynl: fix
get_mask utility routine"), not every mask we use is necessarily
coming from an enum of type "flags". We also allow flipping an
enum into flags on per-attribute basis. That's done by
the 'enum-as-flags' property of an attribute.
Restore this functionality, it's not currently used by any in-tree
family.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Other tests set up the connection fully on both ends before
communicating any data. Add a test which will queue up TLS
records to TCP before the TLS ULP is installed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While testing the tool I noticed we miss the u16 type on payload create.
On the code inspection it turned out we miss also u64 - add them.
We also miss the decoding of u16 despite the fact `NlAttr` class
supports it - add it.
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson says:
====================
net: sunhme: Probe/IRQ cleanups
Well, I've had these patches kicking around in my tree since last
October, so I guess I had better get around to posting them. This
series is mainly a cleanup/consolidation of the probe process, with
some interrupt changes as well. Some of these changes are SBUS- (AKA
SPARC-) specific, so this should really get some testing there as well
to ensure nothing breaks. I've CC'd a few SPARC mailing lists in hopes
that someone there can try this out. I also have an SBUS card I
ordered by mistake if anyone has a SPARC computer but lacks this card.
Changes in v4:
- Tweak variable order for yuletide
- Move uninitialized return to its own commit
- Use correct SBUS/PCI accessors
- Rework hme_version to set the default in pci/sbus_probe and override it (if
necessary) in common_probe
Changes in v3:
- Incorperate a fix from another series into this commit
Changes in v2:
- Move happy_meal_begin_auto_negotiation earlier and remove forward declaration
- Make some more includes common
- Clean up mac address init
- Inline error returns
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the second half of the PCI/SBUS probe functions are the same.
Consolidate them into a common function.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The err_out label used to have cleanup. Now that it just returns, inline it
everywhere.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up some oddities suggested during review.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mac address initialization is braodly the same between PCI and SBUS,
and one was clearly copied from the other. Consolidate them. We still have
to have some ifdefs because pci_(un)map_rom is only implemented for PCI,
and idprom is only implemented for SPARC.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PCI half of this driver was converted in commit 914d9b2711 ("sunhme:
switch to devres"). Do the same for the SBUS half.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alphabetize includes to make it clearer where to add new ones.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of registering one interrupt handler for all four SBUS Quattro
HMEs, let each HME register its own handler. To make this work, we don't
handle the IRQ if none of the status bits are set. This reduces the
complexity of the driver, and makes it easier to ensure things happen
before/after enabling IRQs.
I'm not really sure why we request IRQs in two different places (and leave
them running after removing the driver!). A lot of things in this driver
seem to just be crusty, and not necessarily intentional. I'm assuming
that's the case here as well.
This really needs to be tested by someone with an SBUS Quattro card.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sunhme driver never used the hardware MII polling feature. Even the
if-def'd out happy_meal_poll_start was removed by 2002 [1]. Remove the
various places in the driver which needlessly guard against MII interrupts
which will never be enabled.
[1] https://lwn.net/2002/0411/a/2.5.8-pre3.php3
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we've tried regular autonegotiation and forcing the link mode, just
restart autonegotiation instead of reinitializing the whole NIC.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix an uninitialized return code if we never found a qfe slot. It would be
a bug if we ever got into this situation, but it's good to return something
tracable.
Fixes: acb3f35f92 ("sunhme: forward the error code from pci_enable_device()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Veerasenareddy Burru says:
====================
octeon_ep: deferred probe and mailbox
Implement Deferred probe, mailbox enhancements and heartbeat monitor.
v4 -> v5:
- addressed review comments
https://lore.kernel.org/all/20230323104703.GD36557@unreal/
replaced atomic_inc() + atomic_read() with atomic_inc_return().
v3 -> v4:
- addressed review comments on v3
https://lore.kernel.org/all/20230214051422.13705-1-vburru@marvell.com/
- 0004-xxx.patch v3 is split into 0004-xxx.patch and 0005-xxx.patch
in v4.
- API changes to accept function ID are moved to 0005-xxx.patch.
- fixed rct violations.
- reverted newly added changes that do not yet have use cases.
v2 -> v3:
- removed SRIOV VF support changes from v2, as new drivers which use
ndo_get_vf_xxx() and ndo_set_vf_xxx() are not accepted.
https://lore.kernel.org/all/20221207200204.6819575a@kernel.org/
Will implement VF representors and submit again.
- 0007-xxx.patch and 0008-xxx.patch from v2 are removed and
0009-xxx.patch in v2 is now 0007-xxx.patch in v3.
- accordingly, changed title for cover letter.
v1 -> v2:
- remove separate workqueue task to wait for firmware ready.
instead defer probe when firmware is not ready.
Reported-by: Leon Romanovsky <leon@kernel.org>
- This change has resulted in update of 0001-xxx.patch and
all other patches in the patchset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Monitor periodic heartbeat messages from device firmware.
Presence of heartbeat indicates the device is active and running.
If the heartbeat is missed for configured interval indicates
firmware has crashed and device is unusable; in this case, PF driver
stops and uninitialize the device.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update control mailbox API to include function id in get stats and
link info.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add asynchronous notification support to the control mailbox.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend control command structure to include vfid and
update APIs to accept VF ID.
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enhance control mailbox protocol to support following
- separate command and response queues
* command queue to send control commands to firmware.
* response queue to receive responses and notifications from
firmware.
- variable size messages using scatter/gather
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add control mailbox support for multiple PFs.
Update control mbox base address calculation based on PF function link.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Poll for control messages until interrupts are enabled.
All the interrupts are enabled in ndo_open().
Add ability to listen for notifications from firmware before ndo_open().
Once interrupts are enabled, this polling is disabled and all the
messages are processed by bottom half of interrupt handler.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer probe if firmware is not ready for device usage.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Álvaro Fernández Rojas says:
====================
net: dsa: b53: mdio: add support for BCM53134
This is based on the initial work from Paul Geurts that was sent to the
incorrect linux development lists and recipients.
I've modified it by removing BCM53134_DEVICE_ID from is531x5() and therefore
adding is53134() where needed.
I also added a separate RGMII handling block for is53134() since according to
Paul, BCM53134 doesn't support RGMII_CTRL_TIMING_SEL as opposed to is531x5().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver.
BCM53134 is very similar to the BCM58XX series.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BCM53134 are B53 switches connected by MDIO.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a good practice to state explicitly which are the required Python
packages needed in a particular project to run it. The most commonly
used way is to store them in the `requirements.txt` file*.
*URL: https://pip.pypa.io/en/stable/reference/requirements-file-format/
Currently user needs to figure out himself that Python needs `PyYAML`
and `jsonschema` (and theirs requirements) packages to use the tool.
Add the `requirements.txt` for user convenience.
How to use it:
1) (optional) Create and activate empty virtual environment:
python3.X -m venv venv3X
source ./venv3X/bin/activate
2) Install all the required packages:
pip install -r requirements.txt
or
python -m pip install -r requirements.txt
3) Run the script!
The `requirements.txt` file was tested for:
* Python 3.6
* Python 3.8
* Python 3.10
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Link: https://lore.kernel.org/r/20230323190802.32206-1-michal.michalik@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang with W=1 reports
drivers/isdn/hardware/mISDN/hfcmulti.c:667:1: error: unused function
'vpm_read_address' [-Werror,-Wunused-function]
vpm_read_address(struct hfc_multi *c)
^
drivers/isdn/hardware/mISDN/hfcmulti.c:643:1: error: unused function
'cpld_read_reg' [-Werror,-Wunused-function]
cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
^
These functions are not used, so remove them.
Reported-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230323161343.2633836-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Markus Schneider-Pargmann <msp@baylibre.com> says:
third version part 2, functionally I had to move from spin_lock to
spin_lock_irqsave because of an interrupt that was calling start_xmit,
see attached stack. This is tested on tcan455x but I don't have the
integrated hardware myself so any testing is appreciated.
The series implements many small and bigger throughput improvements.
Changes in v3:
- Remove parenthesis in error messages
- Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit
header and data in one transaction'.
- Replace spin_lock with spin_lock_irqsave. I got a report of a
interrupt that was calling start_xmit just after the netqueue was
woken up before the locked region was exited. spin_lock_irqsave should
fix this. I attached the full stack at the end of the mail if someone
wants to know.
- Rebased to v6.3-rc1.
- Removed tcan4x5x patches from this series.
Changes in v2: https://lore.kernel.org/all/20230125195059.630377-1-msp@baylibre.com
- Rebased on v6.2-rc5
- Fixed missing/broken accounting for non peripheral m_can devices.
part 1:
v1 - https://lore.kernel.org/lkml/20221116205308.2996556-1-msp@baylibre.com
v2 - https://lore.kernel.org/lkml/20221206115728.1056014-1-msp@baylibre.com
part 2:
v1 - https://lore.kernel.org/lkml/20221221152537.751564-1-msp@baylibre.com
v2 - https://lore.kernel.org/lkml/20230125195059.630377-1-msp@baylibre.com
stack of calling start_xmit within locked region:
[ 308.170171] dump_backtrace+0x0/0x1a0
[ 308.173841] show_stack+0x18/0x70
[ 308.177158] sched_show_task+0x154/0x180
[ 308.181084] dump_cpu_task+0x44/0x54
[ 308.184664] rcu_dump_cpu_stacks+0xe8/0x12c
[ 308.188846] rcu_sched_clock_irq+0x9f4/0xd10
[ 308.193118] update_process_times+0x9c/0xec
[ 308.197304] tick_sched_handle+0x34/0x60
[ 308.201231] tick_sched_timer+0x4c/0xa4
[ 308.205071] __hrtimer_run_queues+0x138/0x1e0
[ 308.209429] hrtimer_interrupt+0xe8/0x244
[ 308.213440] arch_timer_handler_phys+0x38/0x50
[ 308.217890] handle_percpu_devid_irq+0x84/0x130
[ 308.222422] handle_domain_irq+0x60/0x90
[ 308.226347] gic_handle_irq+0x54/0x130
[ 308.230099] do_interrupt_handler+0x34/0x60
[ 308.234286] el1_interrupt+0x30/0x80
[ 308.237861] el1h_64_irq_handler+0x18/0x24
[ 308.241958] el1h_64_irq+0x78/0x7c
[ 308.245360] queued_spin_lock_slowpath+0xf4/0x390
[ 308.250067] m_can_start_tx+0x20/0xb0 [m_can]
[ 308.254431] m_can_start_xmit+0xd8/0x230 [m_can]
[ 308.259054] dev_hard_start_xmit+0xd4/0x15c
[ 308.263241] sch_direct_xmit+0xe8/0x370
[ 308.267080] __qdisc_run+0x118/0x650
[ 308.270660] net_tx_action+0x118/0x230
[ 308.274409] _stext+0x124/0x2a0
[ 308.277549] __irq_exit_rcu+0xe4/0x100
[ 308.281302] irq_exit+0x10/0x20
[ 308.284444] handle_domain_irq+0x64/0x90
[ 308.288367] gic_handle_irq+0x54/0x130
[ 308.292119] call_on_irq_stack+0x2c/0x54
[ 308.296043] do_interrupt_handler+0x54/0x60
[ 308.300228] el1_interrupt+0x30/0x80
[ 308.303804] el1h_64_irq_handler+0x18/0x24
[ 308.307901] el1h_64_irq+0x78/0x7c
[ 308.311303] __netif_schedule+0x78/0xa0
[ 308.315138] netif_tx_wake_queue+0x50/0x7c
[ 308.319237] m_can_isr+0x474/0x1710 [m_can]
[ 308.323425] irq_thread_fn+0x2c/0x9c
[ 308.327005] irq_thread+0x178/0x2c0
[ 308.330497] kthread+0x150/0x160
[ 308.333727] ret_from_fork+0x10/0x20
Link: https://lore.kernel.org/all/20230315110546.2518305-1-msp@baylibre.com
[mkl: apply patches 1...5 only, adjust message accordingly]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Interrupts currently get disabled if the interrupt status shows new
received data. Non-peripheral chips handle receiving in a worker thread,
but peripheral chips are handling the receive process in the threaded
interrupt routine itself without scheduling it for a different worker.
So there is no need to disable interrupts for peripheral chips.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20230315110546.2518305-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There are a number of interrupts that are not used by the driver at the
moment. Disable all of these.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20230315110546.2518305-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Interrupts are enabled a few lines further down as well. Remove this
second call to enable all interrupts.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20230315110546.2518305-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The code already exits the function on !ir before this condition. No
need to check again if anything is set as IR_ALL_INT is 0xffffffff.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20230315110546.2518305-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Merge both if-blocks to fix this.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20230315110546.2518305-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
