Since we are not using any internal priority levels, and in the next few
patches will introduce a new index for which the optimisation is not so
lear cut, discard the small table within the priolist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120121439.17600-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Update logic to program AUD_FREQ_CNTRL register based on new guidance.
Earlier this register was configured by BIOS and driver discovered the
value at init. This is no longer recommended and instead driver should
set the values based on the hardware revision.
Add the recommended values for all supported hardware. This change applies
for all GEN12+ hardware. For TGL, some special case handling is needed
to not break existing systems.
Extend the debug print to also include values of the register as written
by BIOS. This can help debug rare cases where BIOS has configured the link
settings to incorrect values.
Bspec: 49279
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324123725.4170214-1-kai.vehmanen@linux.intel.com
We get a lockdep splat when the reset mutex is held, because it can be
taken from fence_wait. This conflicts with the mmu notifier we have,
because we recurse between reset mutex and mmap lock -> mmu notifier.
Remove this recursion by calling revoke_mmaps before taking the lock.
The reset code still needs fixing, as taking mmap locks during reset
is not allowed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Add FIXME.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-64-maarten.lankhorst@linux.intel.com
Instead of force unbinding and rebinding every time, we try to check
if our notifier seqcount is still correct when pages are bound. This
way we only rebind userptr when we need to, and prevent stalls.
Changes since v1:
- Missing mutex_unlock, reported by kbuild.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-63-maarten.lankhorst@linux.intel.com
We need to lock the global gtt dma_resv, use i915_vm_lock_objects
to handle this correctly. Add ww handling for this where required.
Add the object lock around unpin/put pages, and use the unlocked
versions of pin_pages and pin_map where required.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-61-maarten.lankhorst@linux.intel.com
igt_emit_store_dw needs to use the unlocked version, as it's not
holding a lock. This fixes igt_gpu_fill_dw() which is used by
some other selftests.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-51-maarten.lankhorst@linux.intel.com
We may create page table objects on the fly, but we may need to
wait with the ww lock held. Instead of waiting on a freed obj
lock, ensure we have the same lock for each object to keep
-EDEADLK working. This ensures that i915_vma_pin_ww can lock
the page tables when required.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-41-maarten.lankhorst@linux.intel.com
Because of the long lifetime of the mapping, we cannot wrap this in a
simple limited ww lock. Just use the unlocked version of pin_map,
because we'll likely release the mapping a lot later, in a different
thread.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-39-maarten.lankhorst@linux.intel.com
vmap is using pin_pages, but needs to use ww locking,
add pin_pages_unlocked to correctly lock the mapping.
Also add ww locking to begin/end cpu access.
Changes since v1:
- Fix i915_gem_map_dma_buf by using pin_pages_unlocked().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-38-maarten.lankhorst@linux.intel.com
In the ucode functions, the calls are done before userspace runs,
when debugging using debugfs, or when creating semi-permanent mappings;
we can safely use the unlocked versions that does the ww dance for us.
Because there is no pin_pages_unlocked yet, add it as convenience function.
This removes possible lockdep splats about missing resv lock for ucode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-37-maarten.lankhorst@linux.intel.com
By default, we assume that it's called inside igt_create_request
to keep existing selftests working, but allow for manual pinning
when passing a ww context.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-34-maarten.lankhorst@linux.intel.com
Stolen objects need to lock, and we may call put_pages when
refcount drops to 0, ensure all calls are handled correctly.
Changes since v1:
- Rebase on top of upstream changes.
Idea-from: Thomas Hellström <thomas.hellstrom@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-33-maarten.lankhorst@linux.intel.com
We need to take the obj lock to pin pages, so wait until the callers
have done so, before making the object unshrinkable.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-30-maarten.lankhorst@linux.intel.com
Take the ww lock around engine_unpark. Because of the
many many places where rpm is used, I chose the safest option
and used a trylock to opportunistically take this lock for
__engine_unpark.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-28-maarten.lankhorst@linux.intel.com
Make creation separate from pinning, in order to take the lock only
once, and pin the mapping with the lock held.
Changes since v1:
- Rebase on top of upstream changes.
Changes since v2:
- Fully clear wa_ctx on error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-27-maarten.lankhorst@linux.intel.com
We previously complained when ww == NULL.
This function is now only used in selftests to pin an object,
and ww locking is now fixed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Resolve conflict because we don't have a set-domain refactor,
see
https://lore.kernel.org/intel-gfx/20210203090205.25818-8-chris@chris-wilson.co.uk/
The really worrying thing here is that the above patch had a change in
arguments for i915_gem_object_set_to_gtt_domain(), without any
explanation. I decided to just faithfully apply Maarten's change but
not the argument change which was in Maarten's context diff.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-26-maarten.lankhorst@linux.intel.com
This should be done as part of the ww loop, in order to remove a
i915_vma_pin that needs ww held.
Now only i915_ggtt_pin() callers remaining.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-25-maarten.lankhorst@linux.intel.com
We map the initial context during first pin.
This allows us to remove pin_map from state allocation, which saves
us a few retry loops. We won't need this until first pin anyway.
intel_ring_submission_setup() is also reworked slightly to do all
pinning in a single ww loop.
Changes since v1:
- Handle -EDEADLK backoff in intel_ring_submission_setup() better.
- Handle smatch errors reported by Dan and testbot.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-20-maarten.lankhorst@linux.intel.com
With userptr fixed, there is no need for all separate lockdep classes
now, and we can remove all lockdep tricks used. A trylock in the
shrinker is all we need now to flatten the locking hierarchy.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Resolve conflict because we don't have the patch from Chris
to rebrand i915_gem_shrinker_taints_mutex to fs_reclaim_taints_mutex.
It's not a bad idea, but if we do it, it should be moved to the right
header. See
https://lore.kernel.org/intel-gfx/20210202154318.19246-1-chris@chris-wilson.co.uk/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-18-maarten.lankhorst@linux.intel.com
Instead of doing what we do currently, which will never work with
PROVE_LOCKING, do the same as AMD does, and something similar to
relocation slowpath. When all locks are dropped, we acquire the
pages for pinning. When the locks are taken, we transfer those
pages in .get_pages() to the bo. As a final check before installing
the fences, we ensure that the mmu notifier was not called; if it is,
we return -EAGAIN to userspace to signal it has to start over.
Changes since v1:
- Unbinding is done in submit_init only. submit_begin() removed.
- MMU_NOTFIER -> MMU_NOTIFIER
Changes since v2:
- Make i915->mm.notifier a spinlock.
Changes since v3:
- Add WARN_ON if there are any page references left, should have been 0.
- Return 0 on success in submit_init(), bug from spinlock conversion.
- Release pvec outside of notifier_lock (Thomas).
Changes since v4:
- Mention why we're clearing eb->[i + 1].vma in the code. (Thomas)
- Actually check all invalidations in eb_move_to_gpu. (Thomas)
- Do not wait when process is exiting to fix gem_ctx_persistence.userptr.
Changes since v5:
- Clarify why check on PF_EXITING is (temporarily) required.
Changes since v6:
- Ensure userptr validity is checked in set_domain through a special path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
[danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the
previous review round, but which got lost. The other open questions
around page refcount are imo better discussed in a separate series,
with amdgpu folks involved].
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
Now that unsynchronized mappings are removed, the only time userptr
works is when the MMU notifier is enabled. Put all of the userptr
code behind a mmu notifier ifdef.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-16-maarten.lankhorst@linux.intel.com
We should not allow this any more, as it will break with the new userptr
implementation, it could still be made to work, but there's no point in
doing so.
Inspection of the beignet opencl driver shows that it's only used
when normal userptr is not available, which means for new kernels
you will need CONFIG_I915_USERPTR.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-15-maarten.lankhorst@linux.intel.com
There are a couple of ioctl's related to tiling and cache placement,
that make no sense for userptr, reject those:
- i915_gem_set_tiling_ioctl()
Tiling should always be linear for userptr. Changing placement will
fail with -ENXIO.
- i915_gem_set_caching_ioctl()
Userptr memory should always be cached. Changing caching mode will
fail with -ENXIO.
- i915_gem_set_domain_ioctl()
Still temporarily allowed to work as intended, it's used to check
userptr validity. With the reworked userptr code, it will keep
working for this usecase.
This plus the previous changes have been tested against beignet
by using its own unit tests, and intel-video-compute by using
piglit's opencl tests.
Changes since v1:
- set_domain was apparently used in iris for checking userptr validity,
keep it working as intended.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-14-maarten.lankhorst@linux.intel.com
It doesn't make sense to export a memory address, we will prevent
allowing access this way to different address spaces when we
rework userptr handling, so best to explicitly disable it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-13-maarten.lankhorst@linux.intel.com
Userptr should not need the kernel for a userspace memcpy, userspace
needs to call memcpy directly.
Specifically, disable i915_gem_pwrite_ioctl() and i915_gem_pread_ioctl().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-12-maarten.lankhorst@linux.intel.com
To optimize some task deferring it until runtime resume unless someone
holds a runtime PM reference (because in this case the task can be done
w/o the overhead of runtime resume), we have to use the runtime PM
get-if-active logic: If the runtime PM usage count is 0 (and so
get-if-in-use would return false) the runtime suspend handler is not
necessarily called yet (it could be just pending), so the device is not
necessarily powered down, and so the runtime resume handler is not
guaranteed to be called.
The fence revocation depends on the above deferral, so add a
get-if-active helper and use it during fence revocation.
v2:
- Add code comment explaining the fence reg programming deferral logic
to i915_vma_revoke_fence(). (Chris)
- Add Cc: stable and Fixes: tags. (Chris)
- Fix the function docbook comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 181df2d458 ("drm/i915: Take rpm wakelock for releasing the fence on unbind")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com
(cherry picked from commit 9d58aa4629)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As soon as we install fences, we should stop allocating memory
in order to prevent any potential deadlocks.
This is required later on, when we start adding support for
dma-fence annotations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-11-maarten.lankhorst@linux.intel.com
Simple adding of i915_gem_object_lock, we may start to pass ww to
get_pages() in the future, but that won't be the case here;
We override shmem's get_pages() handling by calling
i915_gem_object_get_pages_phys(), no ww is needed.
Changes since v1:
- Call shmem put pages directly, the callback would
go down the phys free path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-10-maarten.lankhorst@linux.intel.com
Instead of creating a separate object type, we make changes to
the shmem type, to clear struct page backing. This will allow us to
ensure we never run into a race when we exchange obj->ops with other
function pointers.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-9-maarten.lankhorst@linux.intel.com
We want to remove the changing of ops structure for attaching
phys pages, so we need to kill off HAS_STRUCT_PAGE from ops->flags,
and put it in the bo.
This will remove a potential race of dereferencing the wrong obj->ops
without ww mutex held.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: apply with wiggle]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-8-maarten.lankhorst@linux.intel.com
Currently we have a lot of places where we hold the gem object lock,
but haven't yet been converted to the ww dance. Complain loudly about
those places.
i915_vma_pin shouldn't have the obj lock held, so we can do a ww dance,
while i915_vma_pin_ww should.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-6-maarten.lankhorst@linux.intel.com
i915_vma_pin may fail with -EDEADLK when we start locking page tables,
so ensure we handle this correctly.
Changes since v1:
- Drop -EDEADLK todo, this commit handles it.
- Change eb_pin_vma from sort-of-bool + -EDEADLK to a proper int. (Matt)
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-5-maarten.lankhorst@linux.intel.com
We need to get rid of allocations in the cmd parser, because it needs
to be called from a signaling context, first move all pinning to
execbuf, where we already hold all locks.
Allocate jump_whitelist in the execbuffer, and add annotations around
intel_engine_cmd_parser(), to ensure we only call the command parser
without allocating any memory, or taking any locks we're not supposed to.
Because i915_gem_object_get_page() may also allocate memory, add a
path to i915_gem_object_get_sg() that prevents memory allocations,
and walk the sg list manually. It should be similarly fast.
This has the added benefit of being able to catch all memory allocation
errors before the point of no return, and return -ENOMEM safely to the
execbuf submitter.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-4-maarten.lankhorst@linux.intel.com
We're starting to require the reservation lock for pinning,
so wait until we have that.
Update the selftests to handle this correctly, and ensure pin is
called in live_hwsp_rollover_user() and mock_hwsp_freelist().
Changes since v1:
- Fix NULL + XX arithmatic, use casts. (kbuild)
Changes since v2:
- Clear entire cacheline when pinning.
Changes since v3:
- CACHELINE_BYTES -> TIMELINE_SEQNO_BYTES. (jekstrand)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-3-maarten.lankhorst@linux.intel.com
Instead of sharing pages with breadcrumbs, give each timeline a
single page. This allows unrelated timelines not to share locks
any more during command submission.
As an additional benefit, seqno wraparound no longer requires
i915_vma_pin, which means we no longer need to worry about a
potential -EDEADLK at a point where we are ready to submit.
Changes since v1:
- Fix erroneous i915_vma_acquire that should be a i915_vma_release (ickle).
- Extra check for completion in intel_read_hwsp().
Changes since v2:
- Fix inconsistent indent in hwsp_alloc() (kbuild)
- memset entire cacheline to 0.
Changes since v3:
- Do same in intel_timeline_reset_seqno(), and clflush for good measure.
Changes since v4:
- Use refcounting on timeline, instead of relying on i915_active.
- Fix waiting on kernel requests.
Changes since v5:
- Bump amount of slots to maximum (256), for best wraparounds.
- Add hwsp_offset to i915_request to fix potential wraparound hang.
- Ensure timeline wrap test works with the changes.
- Assign hwsp in intel_timeline_read_hwsp() within the rcu lock to
fix a hang.
Changes since v6:
- Rename i915_request_active_offset to i915_request_active_seqno(),
and elaborate the function. (tvrtko)
Changes since v7:
- Move hunk to where it belongs. (jekstrand)
- Replace CACHELINE_BYTES with TIMELINE_SEQNO_BYTES. (jekstrand)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-2-maarten.lankhorst@linux.intel.com
To optimize some task deferring it until runtime resume unless someone
holds a runtime PM reference (because in this case the task can be done
w/o the overhead of runtime resume), we have to use the runtime PM
get-if-active logic: If the runtime PM usage count is 0 (and so
get-if-in-use would return false) the runtime suspend handler is not
necessarily called yet (it could be just pending), so the device is not
necessarily powered down, and so the runtime resume handler is not
guaranteed to be called.
The fence revocation depends on the above deferral, so add a
get-if-active helper and use it during fence revocation.
v2:
- Add code comment explaining the fence reg programming deferral logic
to i915_vma_revoke_fence(). (Chris)
- Add Cc: stable and Fixes: tags. (Chris)
- Fix the function docbook comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 181df2d458 ("drm/i915: Take rpm wakelock for releasing the fence on unbind")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com
Convert the display-specific usage of INTEL_GEN, while leaving the
non-display usage as-is for now.
In the near-future we'll probably want to think about moving display
interrupt handling to its own file under the display/ directory.
v2:
- Use new IS_DISPLAY_VER() macro.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-6-matthew.d.roper@intel.com
Although most of the code in this file is display-related (watermarks),
there's some functions that are not (e.g., clock gating). Thus we need
to do the conversions to DISPLAY_VER() manually here rather than using
Coccinelle.
In the near-future we'll probably want to think about moving watermark
logic out of intel_pm.c and into watermark-specific files under the
display/ directory.
v2:
- Use new IS_DISPLAY_VER macro where appropriate.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-5-matthew.d.roper@intel.com
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
Although we've long referred to platforms by a single "GEN" number, the
hardware teams have recommended that we stop doing this since the
various component IP blocks are going to start using independent number
schemes with varying cadence. To support this, hardware platforms a bit
down the road are going to start providing MMIO registers that the
driver can read to obtain the "graphics version," "media version," and
"display version" without needing to do a PCI ID -> platform -> version
translation.
Although our current platforms don't yet expose these registers (and the
next couple we release probably won't have them yet either), the
hardware teams would still like to see us move to this independent
numbering scheme now in preparation. For i915 that means we should try
to eliminate all usage of INTEL_GEN() throughout our code and instead
replace it with separate GRAPHICS_VER(), MEDIA_VER(), and DISPLAY_VER()
constructs in the code. For old platforms, these will all usually give
the same value for each IP block (aside from a few special cases like
GLK which we can no more accurately represent as graphics=9 +
display=10), but future platforms will have more flexibility to bump IP
version numbers independently.
The upcoming ADL-P platform will have a display version of 13 and a
graphics version of 12, so let's just the first step of breaking out
DISPLAY_VER(), but leaving the rest of INTEL_GEN() untouched for now.
For now we'll automatically derive the display version from the
platform's INTEL_GEN() value except in cases where an alternative
display version is explicitly provided in the device info structure.
We also add some helper macros IS_DISPLAY_VER(i915, ver) and
IS_DISPLAY_RANGE(i915, from, until) that match the behavior of the
existing gen-based macros. However unlike IS_GEN(), we will implement
those macros with direct comparisons rather than trying to maintain a
mask to help compiler optimization. In practice the optimization winds
up not being used in very many places (since the vast majority of our
platform checks are of the form "gen >= x") so there is pretty minimal
size reduction in the final driver binary[1]. We're also likely going
to need to extend these version numbers to non-integer major.minor
values at some point in the future, so the mask approach won't work at
all once we get to platforms like that.
[1] The results before/after the next patch in this series, which
switches our code over to the new display macros:
$ size i915.ko.{orig,new}
text data bss dec hex filename
2940291 102944 5384 3048619 2e84ab i915.ko.orig
2940723 102956 5384 3049063 2e8667 i915.ko.new
v2:
- Move version into device info's display sub-struct. (Jani)
- Add extra parentheses to macros. (Jani)
- Note the lack of genmask optimization in the display-based macros and
give size data. (Lucas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-3-matthew.d.roper@intel.com
ILK is the only platform that we consider "gen5" and SNB is the only
platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then
replace numeric platform tests for these two generations with direct
platform tests with the following Coccinelle semantic patch:
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 5)
+ IS_IRONLAKE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 6)
+ IS_SANDYBRIDGE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN_RANGE(dev_priv, 5, 6)
+ IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv)
This will simplify our upcoming patches which eliminate INTEL_GEN()
usage in the display code.
v2:
- Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville)
- Rebase + regenerate from semantic patch
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
Use the correct DSS CTL registers for ICL DSI transcoders.
As a side effect, this also brings back the sanity check for trying to
use pipe DSC registers on pipe A on ICL.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
(cherry picked from commit 5706d02871)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit 97bc7ffa1b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By the specification the 0xF0000 - 0xF02FF range is only valid if the
LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support
otherwise.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com
(cherry picked from commit 1663ad4936)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By the specification the 0xF0000-0xF02FF range is only valid when the
DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so.
Trying to detect LTTPRs returned corrupted values for the above DPCD
range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD
revision 1.2 connected.
v2: Add the actual version check.
v3: Fix s/DRPX/DPRX/ typo.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
(cherry picked from commit 264613b406)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com>
Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
(cherry picked from commit 984982f3ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use the correct DSS CTL registers for ICL DSI transcoders.
As a side effect, this also brings back the sanity check for trying to
use pipe DSC registers on pipe A on ICL.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
hdcp2_enable_stream_encryption shouldn't get called in case
of any port authentication or encryption error, though
hdcp2_enable_stream_encryption checks for link encryption
before enabling stream encryption and returns error but
this return error code won't be correct in case of any error
due to port authentication and encryption.
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-4-anshuman.gupta@intel.com
When stream encryption enabling fails due to Link encryption status
has stopped, prepare HDCP2 for recovery by disabling port authentication
and encryption such that it can re-attempt port authentication
and encryption.
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-3-anshuman.gupta@intel.com
DP MST Link Check performed only for the connector involved with
HDCP port authentication and encryption, for other connector it
simply returns link check with true and update the uevent.
Therefore in case of HDCP 2.2 link failure, disable HDCP encryption
and de-authenticate the port so next time it can enable port
authentication and encryption.
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-2-anshuman.gupta@intel.com
It requires to check streams type1 capability in mst topology
by checking Rxinfo instead connector HDCP2.x capability in
order to enforce type0 stream encryption in a mix of
HDCP {1.x,2.x} mst topology.
Rxcaps always shows HDCP 2.x capability of immediate downstream
connector. Let's use Rxinfo HDCP1_DEVICE_DOWNSTREAM bit to
detect a HDCP {1.x,2.x} mix mst topology.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319091732.17547-1-anshuman.gupta@intel.com
Extract the g4x+ HDMI low level code to its own file,
leaving intel_hdmi.c to deal with higher level issues.
The infoframe support I decided to leave in intel_hdmi.c
since I think we need to move that as a whole to its own file.
It is after all used also for DP SDPs, so no longer HDMI
specific.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-7-ville.syrjala@linux.intel.com
Move the g4x+ DP code into a new file. This will leave mostly
platform agnostic code in intel_dp.c. Well, the misplaced phy
test stuff pretty much ruins that, but let's squint real hard
for now.
v2: Add comment exlaining which platforms are covered (Daniel)
Leave intel_dp_unused_lane_mask() be since it is pretty generic
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-6-ville.syrjala@linux.intel.com
By the specification the 0xF0000 - 0xF02FF range is only valid if the
LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support
otherwise.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com
By the specification the 0xF0000-0xF02FF range is only valid when the
DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so.
Trying to detect LTTPRs returned corrupted values for the above DPCD
range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD
revision 1.2 connected.
v2: Add the actual version check.
v3: Fix s/DRPX/DPRX/ typo.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com>
Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
All callers just use it to check if swiotlb is active at all, for which
they can just use is_swiotlb_active. In the longer run drivers need
to stop using is_swiotlb_active as well, but let's do the simple step
first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Remove code for resetting frl related members from intel_disable_dp, as
this is not applicable for older platforms.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210309043915.1921-3-ankit.k.nautiyal@intel.com
The rationale for this change is roughly as follows:
1. The functionality can be done entirely in userspace with a
combination of mmap + memcpy
2. The only reason anyone in userspace is still using it is because
someone implemented bo_subdata that way in libdrm ages ago and
they're all too lazy to write the 5 lines of code to do a map.
3. This falls cleanly into the category of things which will only get
more painful with local memory support.
These ioctls aren't used much anymore by "real" userspace drivers.
Vulkan has never used them and neither has the iris GL driver. The old
i965 GL driver does use PWRITE for glBufferSubData but it only supports
up through Gen11; Gen12 was never enabled in i965. The compute driver
has never used PREAD/PWRITE. The only remaining user is the media
driver which uses it exactly twice and they're easily removed [1] so
expecting them to drop it going forward is reasonable.
IGT changes which handle this kernel change have also been submitted [2].
[1] https://github.com/intel/media-driver/pull/1160
[2] https://patchwork.freedesktop.org/series/81384/
v2 (Jason Ekstrand):
- Improved commit message with the status of all usermode drivers
- A more future-proof platform check
v3 (Jason Ekstrand):
- Drop the HAS_LMEM checks as they're already covered by the version
checks
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-4-jason@jlekstrand.net
The Vulkan driver in Mesa for Intel hardware never uses relocations if
it's running on a version of i915 that supports at least softpin which
all versions of i915 supporting Gen12 do. On the OpenGL side, Gen12+ is
only supported by iris which never uses relocations. The older i965
driver in Mesa does use relocations but it only supports Intel hardware
through Gen11 and has been deprecated for all hardware Gen9+. The
compute driver also never uses relocations. This only leaves the media
driver which is supposed to be switching to softpin going forward.
Making softpin a requirement for all future hardware seems reasonable.
There is one piece of hardware enabled by default in i915: RKL which was
enabled by e22fa6f0a9 which has not yet landed in drm-next so this
almost but not really a userspace API change for RKL. If it becomes a
problem, we can always add !IS_ROCKETLAKE(eb->i915) to the condition.
Rejecting relocations starting with newer Gen12 platforms has the
benefit that we don't have to bother supporting it on platforms with
local memory. Given how much CPU touching of memory is required for
relocations, not having to do so on platforms where not all memory is
directly CPU-accessible carries significant advantages.
v2 (Jason Ekstrand):
- Allow TGL-LP platforms as they've already shipped
v3 (Jason Ekstrand):
- WARN_ON platforms with LMEM support in case the check is wrong
v4 (Jason Ekstrand):
- Call out Rocket Lake in the commit message
v5 (Jason Ekstrand):
- Drop the HAS_LMEM check as it's already covered by the version check
v6 (Jason Ekstrand):
- Move the check to eb_validate_vma() with all the other exec_object
validation checks.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-3-jason@jlekstrand.net
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
Add intel_bios_encoder_data pointer to encoder, and use it for hdmi and
dp iboost. For starters, we only set the encoder->devdata for DDI
encoders, i.e. we can only use it for data that is used by DDI encoders.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bc49244ce68e136e5b21db4c4e6554bec9ac0fb.1615998927.git.jani.nikula@intel.com
Stop caching the information in ddi_port_info. We're phasing out
ddi_port_info usage completely, and prefer using the VBT child device
information directly using the provided helpers.
v2:
- Remove supports_typec_usb & supports_tbt from ddi_vbt_port_info (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b04bd183e7554aeb4bc3962af90d63171aa32fc2.1615998927.git.jani.nikula@intel.com
Start using struct intel_bios_encoder_data directly. We'll start
sanitizing the child device data directly as well, instead of the cached
data in ddi_port_info[]. The one downside here is having to store a
non-const pointer back to intel_bios_encoder_data.
Eventually we'll be able to have a direct pointer from encoder to
intel_bios_encoder_data, removing the need to go through the
ddi_port_info[] array altogether. And we'll be able to remove all the
cached data in ddi_port_info[].
v2:
- Remove supports_dp and supports_edp from ddi_port_info too
- Add devdata != NULL check in intel_bios_is_port_edp()
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/061df32a012ff640060920fcd730fb23f8717ee8.1615998927.git.jani.nikula@intel.com
These will be exposed to the rest of the driver and replace other
functions. Everything will operate on the child devices.
v2:
- Rebased, removed stray blank line
- Also abstracted intel_bios_encoder_supports_crt (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2bd40ccc093796d16300742d1789d78ffac3c450.1615998927.git.jani.nikula@intel.com
Instead of initialing data directly in ddi_port_info array, create fake
child devices for default outputs when the VBT is missing. This makes
further unification of output handling easier.
This will make intel_bios_is_port_present() return true for the fake
child devices. This may cause subtle changes in a handful of places.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91675b40a78bd04bf138598d979661257181880d.1615998927.git.jani.nikula@intel.com
There are two main cases where the default outputs are useful when the
VBT is missing:
- There are some DDI-platform Chromebooks out there that do not have a
VBT, which worked by coincidence because of the default outputs. The
machines need to continue to work.
- Early platform enabling when the VBT might not be available. (This
could be circumvented by using the i915.vbt_firmware parameter.)
Prepare for generating fake child devices for the default outputs by
limiting the number of outputs. We don't want to generate excessive
amounts of fake child devices. This could be perhaps be limited even
more in the future, but match what's possible on all DDI platforms.
Note that limiting the defaults to non-TypeC ports in commit
828ccb31cf ("drm/i915/icl: Add TypeC ports only if VBT is present") is
a more strict limit, and makes this a no-op on recent platforms.
v2: Rewrote commit message
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c9c9743af1c7265a2c976d582b7a6685ec0c414.1615998927.git.jani.nikula@intel.com
Pre-DDI and non-CHV aren't using the information created here anyway, so
don't bother setting the defaults for them. This should be a
non-functional change, but is separated here to catch any regressions in
a single commit.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41526a4eee5fb0de8d7f1ffe4c09965b63ccbaa8.1615998927.git.jani.nikula@intel.com
Highlights:
- Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas)
- Refactor display code to shrink intel_display.c etc. (Dave)
- Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas)
- Add eDP MSO support (Jani)
Display:
- Refactor to support multiple PSR instances (Gwan-gyeong)
- Link training debug logging updates (Sean)
- Updates to eDP fixed mode handling (Jani)
- Disable PSR2 on JSL/EHL (Edmund)
- Support DDR5 and LPDDR5 for bandwidth computation (Clint, José)
- Update VBT DP max link rate table (Shawn)
- Disable the QSES check for HDCP2.2 over MST (Juston)
- PSR updates, refactoring, selective fetch (José, Gwan-gyeong)
- Display init sequence refactoring (Lucas)
- Limit LSPCON to gen 9 and 10 platforms (Ankit)
- Fix DDI lane polarity per VBT info (Uma)
- Fix HDMI vswing programming location in mode set (Ville)
- Various display improvements and refactorings and cleanups (Ville)
- Clean up DDI clock routing and readout (Ville)
- Workaround async flip + VT-d corruption on HSW/BDW (Ville)
- SAGV watermark fixes and cleanups (Ville)
- Silence pipe tracepoint WARNs (Ville)
Other:
- Remove require_force_probe protection from RKL, may need to be revisited (Tejas)
- Detect loss of MMIO access (Matt)
- GVT display improvements
- drm/i915: Disable runtime power management during shutdown (Imre)
- Perf/OA updates (Umesh)
- Remove references to struct drm_device.pdev, via topic branch (Thomas)
- Backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit be0bdd67fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On HSW/BDW with VT-d active the first tile row scanned out
after the first async flip of the frame often ends up corrupted.
Whether the corruption happens or not depends on the scanline
on which the async flip happens, but the behaviour seems very
consistent. Ie. the same set of scanlines (which are most scanlines)
always show the corruption. And another set of scanlines (far less
of them) never shows the corruption.
I discovered that disabling the fetch-stride stretching
feature cures the corruption. This is some kind of TLB related
prefetch thing AFAIK. We already disable it on SNB primary
planes due to a documented workaround. The hardware folks
indicated that disabling this should be fine, so let's go
with that.
And while we're here, let's document the relevant bits on all
pre-skl platforms.
Fixes: 2a636e240c ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13a ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
(cherry picked from commit b7a7053ab2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One instance of DRM_DEBUG_KMS was leftover in dp_link_training, convert
it to the new shiny.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-2-sean@poorly.run
This patch adds some newlines which are missing from debug messages.
This will prevent logs from being stacked up in dmesg.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-1-sean@poorly.run
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
Rename a bunch of the skl+ watermark struct members to
have sensible names. Avoids me having to think what
plane_res_b/etc. means.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Make the code more typo proof by extracting small helpers that
do the "do we have enough DDB for the WM level?" checks in
a consistent manner.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Let's make all the "do we have enough DDB for this WM level?"
checks use min_ddb_alloc. To achieve that we need to populate
this for the transition watermarks as well.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
For non-transition watermarks we are supposed to check min_ddb_alloc
rather than plane_res_b when determining if we have enough DDB space
for it. A bit too much copy pasta made me check the wrong thing.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: df4a50a35e ("drm/i915: Zero out SAGV wm when we don't have enough DDB for it")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Say we have two planes enabled with watermarks configured
as follows:
plane A: wm0=enabled/can_sagv=false, wm1=enabled/can_sagv=true
plane B: wm0=enabled/can_sagv=true, wm1=disabled
This is possible since the latency we use to calculate
can_sagv may not be the same for both planes due to
skl_needs_memory_bw_wa().
In this case skl_crtc_can_enable_sagv() will see that
both planes have enabled at least one watermark level
with can_sagv==true, and thus proceeds to allow SAGV.
However, since plane B does not have wm1 enabled
plane A can't actually use it either. Thus we are
now running with SAGV enabled, but plane A can't
actually tolerate the extra latency it imposes.
To remedy this only allow SAGV on if the highest common
enabled watermark level for all active planes can tolerate
the extra SAGV latency.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
On HSW/BDW with VT-d active the first tile row scanned out
after the first async flip of the frame often ends up corrupted.
Whether the corruption happens or not depends on the scanline
on which the async flip happens, but the behaviour seems very
consistent. Ie. the same set of scanlines (which are most scanlines)
always show the corruption. And another set of scanlines (far less
of them) never shows the corruption.
I discovered that disabling the fetch-stride stretching
feature cures the corruption. This is some kind of TLB related
prefetch thing AFAIK. We already disable it on SNB primary
planes due to a documented workaround. The hardware folks
indicated that disabling this should be fine, so let's go
with that.
And while we're here, let's document the relevant bits on all
pre-skl platforms.
Fixes: 2a636e240c ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13a ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Commit 311a50e76a ("drm/i915: Add support for mandatory cmdparsing")
introduced mandatory command parsing but setup failures were not
translated into wedging the GPU which was probably the intent.
Possible errors come in two categories. Either the sanity check on
internal tables has failed, which should be caught in CI unless an
affected platform would be missed in testing; or memory allocation failure
happened during driver load, which should be extremely unlikely but for
correctness should still be handled.
v2:
* Tidy coding style. (Chris)
[airlied: cherry-picked to avoid rc1 base]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 311a50e76a ("drm/i915: Add support for mandatory cmdparsing")
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302114213.1102223-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 5a1a659762d35a6dc51047c9127c011303c77b7f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Let's check that we actually found the PLL before doing the
port_clock readout, just in case the hardware was severly
misprogrammed by the previous guy. Not sure the hw would
even survive such misprogramming without hanging but no
real harm in checking anyway.
Cc: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310194351.6233-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Now that all the encoder clock stuff is uniformly abstracted
for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping()
to cover all of them.
Not sure there is a particular benefit in doing so, but less special
cases always makes me happy.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Support reading out the current state of the DDI clock.
Not sure we really want this. Seems a bit excessive just to
restore the debug print to icl_sanitize_encoder_pll_mapping()?
But maybe there's more use for it?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook.
There it neatly sits next to the matching .{enable,disable}_clock()
functions.
In order to avoid excessive boilerplate I changed the behaviour
such that all platforms now do the readout via
crtc_state->port_dpll[].
ICL+ TC is still a bit special due to TBTPLL not having a functional
.get_freq(). Should probably change that by adopting the LCPLL
approach, but that would require a fairly substantial rework of the
DPLL ID handling. So leave it for later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
All the other places we have use pipes instead of crtc indices
when tracking resource usage. Life is easier when we do it
the same way always, so switch the dpll mgr to using pipes as
well. Looks like it was actually mixing these up in some cases
so it would not even have worked correctly except when the
device has a contiguous set of pipes starting from pipe A.
Granted, that is the typical case but supposedly it may not
always hold on modern hw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
The clock readout for DDI encoders needs to moved into the encoders.
To that end intel_dpll_readout_hw_state() needs to happen after
the encoder readout as otherwise it can't correctly populate
the PLL crtc_mask/active_mask bitmasks.
v2: Populate DPLL ref clocks before the encoder->get_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210225161225.30746-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Stop assuming intel_ddi_get_config() is all we need from the primary
encoder, and instead call it via the .get_config() vfunc. This
will allow customized .get_config() for the primary, which I plan
to use to handle the differences in the clock readout between various
platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
commit 33267703df ("drm/i915/dsi: Enable software vblank counter")
claims to get the mode_flags from the crtc_state, but in fact does
not. Fix it to do it right.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
For platforms/outputs without hardware frame counters we can't
call drm_crtc_accurate_vblank_count() when the vblank support is
disabled or we just get a WARN due to the crtc timings
(vblank->hwmode) being considered invalid. Note that until the
pipe in question has been enabled and drm_crtc_set_max_vblank_count()
has been called on it we would also take this path on platforms
which have a working frame counter. So getting the WARN is rather
likely on any platform unless you always boot with lots of displays
plugged in.
Also even on hardware with a working frame counter we may not be
able to read the actual frame counter register on disabled pipes
due the relevant power well being disabled. Ie. would just result
in the unclaimed reg spew.
So let's just avoid all this an directly report zero in case
the pipe is disabled.
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-3-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
On platforms/outputs without a working frame counter we rely
on the vblank code to cook up the frame counter from the timestamps.
That requires that vblank support is enabled. Thus we need to
move the pipe enable/disable tracepoints to the other side
of the drm_vblank_{on,off}() calls. There shouldn't really be
much happening between these old and new call sites so the
tracepoints should still provide reasonable data.
The alternative would be to give up on having the frame counter
values in the trace which would render the tracepoints more or
less pointless.
v2: Missed one case in intel_ddi_post_disable()
Drop the now useless i915_trace.h includes
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-2-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
In the case of MSO (Multi-SST Operation), the EDID contains the timings
for a single panel segment. We'll want to hide the fact from userspace,
and expose modes that span the entire display.
Don't modify the EDID, as the userspace should not use that for
modesetting, only modify the actual modes.
v3: Use pixel overlap if available.
v2: Rename intel_dp_mso_mode_fixup -> intel_edp_mso_mode_fixup
Cc: Nischal Varide <nischal.varide@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2862284eb033bb0ffc96134b7d5b11bf29e4587f.1614682842.git.jani.nikula@intel.com
Add splitter configuration to crtc state, and read it where
supported. Also add splitter state dumping. The stream splitter will be
required for eDP MSO.
v4:
- Catch invalid splitter configuration (Uma)
v3:
- Convert segment timings to full panel timings.
- Refer to splitter instead of mso in crtc state.
- Dump splitter state.
v2: Add warning for mso being enabled on pipes other than A.
Cc: Nischal Varide <nischal.varide@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95cbe1c9d45edf3e3ec252e49fb49055def98155.1614682842.git.jani.nikula@intel.com
Get rid of the nonsense cursor special case in verify_wm_state()
by just iterating through all the planes. And let's use the
canonical [PLANE:..] style in the debug prints while at it.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We know which WM0 (normal vs. SAGV) we supposedly programmed
into the hardware, so just check against that instead of accepting
either watermark as valid.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Seems to me that if we calculate WM0 using the bumped up SAGV latency
we need to calculate the transition watermark accordingly. Track it
alongside the other watermarks.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We'll want a SAGV transition watermark as well. Prepare
for that by collecting SAGV wm0 into a sub-strcture.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Let's handle the SAGV WM0 more like the other wm levels and just
totally zero it out when we don't have the DDB space to back it
up.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
When we switch between SAGV on vs. off we need to reprogram all
plane wateramrks accordingly. Currently skl_wm_add_affected_planes()
totally ignores the SAGV watermark and just assumes we will use
the normal WM0.
Fix this by utilizing skl_plane_wm_level() which picks the
correct watermark based on use_sagv_wm. Thus we will force
an update on all the planes whose watermark registers need
to be reprogrammed.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Populate conn_state->max_bpc with something sensible from the start.
Otherwise it's possible that we get to compute_sink_pipe_bpp() with
max_bpc==0.
The specific scenario goes as follows:
1. Initial connector state allocated with max_bpc==0
2. Trigger a modeset on the crtc feeding the connector, without
actually adding the connector to the commit
3. drm_atomic_connector_check() is skipped because the
connector has not yet been added, hence conn_state->max_bpc
retains its current value
4. drm_atomic_helper_check_modeset() ->
drm_atomic_add_affected_connectors() -> the connector
is now part of the commit
5. compute_baseline_pipe_bpp() -> MISSING_CASE(max_bpc==0)
Note that pipe_bpp itself may not be populated on pre-g4x machines,
in which case we just fall back to max_bpc==8 and let .compute_config()
limit the resulting pipe_bpp further if necessary.
Cc: Daniel Vetter <daniel@ffwll.ch>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216160035.4780-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
While reviewing patches for handling workarounds related to gen9 bc, Imre
from Intel discovered that we're using spt_hpd_irq_setup() on ICP+ PCHs
despite it being almost the same as icp_hpd_irq_setup(). Since we need to
be calling icp_hpd_irq_setup() to ensure that CML-S/TGP platforms function
correctly anyway, let's move platforms using PCH_ICP which aren't handled
by gen11_hpd_irq_setup() over to icp_hpd_irq_setup().
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210217025337.1929015-2-lyude@redhat.com
For Legacy S3 suspend/resume GEN9 BC needs to enable and
setup TGP PCH.
v2:
* Move Wa_14010685332 into it's own function - vsyrjala
* Add TODO comment about figuring out if we can move this workaround - imre
v3:
* Rename cnp_irq_post_reset() to cnp_display_clock_wa()
* Add TODO item mentioning we need to clarify which platforms this
workaround applies to
* Just use ibx_irq_reset() in gen8_irq_reset(). This code should be
functionally equivalent on gen9 bc to the code v2 added
* Drop icp_hpd_irq_setup() call in spt_hpd_irq_setup(), this looks to be
more or less identical to spt_hpd_irq_setup() minus additionally enabling
one port. Will update i915 to use icp_hpd_irq_setup() for ICP in a
separate patch.
v4:
* Revert Wa_14010685332 system list in comments to how it was before
* Add back HAS_PCH_SPLIT() check before calling ibx_irq_reset()
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210217180016.1937401-1-lyude@redhat.com
Current vblank emulator uses single hrtimer at 16ms period for all vGPUs,
which introduces three major issues:
- 16ms matches the refresh rate at 62.5Hz (instead of 60Hz) which
doesn't follow standard timing. This leads to some frame drop or glitch
issue during video playback. SW expects a vsync interval of 16.667ms or
higher precision for an accurate 60Hz refresh rate. However current
vblank emulator only works at 16ms.
- Doesn't respect the fact that with current virtual EDID timing set,
not all resolutions are running at 60Hz. For example, current virtual
EDID also supports refresh rate at 56Hz, 59.97Hz, 60Hz, 75Hz, etc.
- Current vblank emulator use single hrtimer for all vGPUs. Regardsless
the possibility that different guests could run in different
resolutions, all vsync interrupts are injected at 16ms interval with
same hrtimer.
Based on previous patch which decode guest expected refresh rate from
vreg, the vblank emulator refactor patch makes following changes:
- Change the vblank emulator hrtimer from gvt global to per-vGPU.
By doing this, each vGPU display can operates at different refresh
rates. Currently only one dislay is supported for each vGPU so per-vGPU
hrtimer is enough. If multiple displays are supported per-vGPU in
future, we can expand to per-PIPE further.
- Change the fixed hrtimer period from 16ms to dynamic based on vreg.
GVT is expected to emulate the HW as close as possible. So reflacting
the accurate vsync interrupt interval is more correct than fixed 16ms.
- Change the vblank timer period and start the timer on PIPECONF change.
The initial period is updated to 16666667 based on 60Hz refresh rate.
According to PRM, PIPECONF controls the timing generator of the
connected display on this pipe, so it's safe to stop hrtimer on
PIPECONF disabling, and re-start hrtimer at new period on enabling.
Other changes including:
- Move vblank_timer_fn from irq.c into display.c.
- Clean per-vGPU vblank timer at clean_display instead of clean_irq.
To run quick test, launch a web browser and goto URL: www.displayhz.com
The actual refresh rate from guest can now always match guest settings.
V2:
Rebase to 5.11.
Remove unused intel_gvt_clean_irq().
Simplify enable logic in update_vblank_emulation(). (zhenyu)
Loop all vGPU by idr when check all vblank timer. (zhenyu)
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210226044630.284269-1-colin.xu@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Guest OS builds up its timing mode list based on the virtual EDID as
simulated by GVT. However since there are several timings supported in
the virtual EDID, and each timing can also support several modes
(resolution and refresh rate), current emulated vblank period (16ms)
may not always be correct and could lead to miss-sync behavior in guest.
Guest driver will setup new resolution and program vregs accordingly and
it should always follows GEN PRM. Based on the simulated display regs by
GVT, it's safe to decode the actual refresh rate using by guest from
vreg only.
Current implementation only enables PIPE_A and PIPE_A is always tied to
TRANSCODER_A in HW. GVT may simulate DP monitor on PORT_B or PORT_D
based on the caller. So we can find out which DPLL is used by PORT_x
which connected to TRANSCODER_A and calculate the DP bit rate from the
DPLL frequency. Then DP stream clock (pixel clock) can be calculated
from DP link M/N and DP bit rate. Finally, get the refresh rate from
pixel clock, H total and V total.
The per-vGPU accurate refresh rate is not used yet but only stored,
until per-vGPU vblank timer is enabled. Then each vGPU can have
different and accurate refresh rate per-guest driver configuration.
Refer to PRM for GEN display and VESA timing standard for more details.
V2:
Rebase to 5.11.
Correctly calculate DP link rate for BDW and BXT.
Use GVT_DEFAULT_REFRESH_RATE instead of hardcoded to 60 as init refresh.
Typo fix. (zhenyu)
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210226044559.283622-1-colin.xu@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
core:
- vblank fence timing improvements
dma-buf:
- improve error handling
ttm:
- memory leak fix
msm:
- a6xx speedbin support
- a508, a509, a512 support
- various a5xx fixes
- various dpu fixes
- qseed3lite support for sm8250
- dsi fix for msm8994
- mdp5 fix for framerate bug with cmd mode panels
- a6xx GMU OOB race fixes that were showing up in CI
- various addition and removal of semicolons
- gem submit fix for legacy userspace relocs path
amdgpu:
- Clang warning fix
- S0ix platform shutdown/poweroff fix
- Misc display fixes
i915:
- color format fix
- -Wuninitialised reenabled
- GVT ww locking, cmd parser fixes
atyfb:
- fix build
rockchip:
- AFBC modifier fix
-----BEGIN PGP SIGNATURE-----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=hrdL
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"This is mostly fixes but I missed msm-next pull last week. It's been
in drm-next.
Otherwise it's a selection of i915, amdgpu and misc fixes, one TTM
memory leak, nothing really major stands out otherwise.
core:
- vblank fence timing improvements
dma-buf:
- improve error handling
ttm:
- memory leak fix
msm:
- a6xx speedbin support
- a508, a509, a512 support
- various a5xx fixes
- various dpu fixes
- qseed3lite support for sm8250
- dsi fix for msm8994
- mdp5 fix for framerate bug with cmd mode panels
- a6xx GMU OOB race fixes that were showing up in CI
- various addition and removal of semicolons
- gem submit fix for legacy userspace relocs path
amdgpu:
- clang warning fix
- S0ix platform shutdown/poweroff fix
- misc display fixes
i915:
- color format fix
- -Wuninitialised reenabled
- GVT ww locking, cmd parser fixes
atyfb:
- fix build
rockchip:
- AFBC modifier fix"
* tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm: (60 commits)
drm/panel: kd35t133: allow using non-continuous dsi clock
drm/rockchip: Require the YTR modifier for AFBC
drm/ttm: Fix a memory leak
drm/drm_vblank: set the dma-fence timestamp during send_vblank_event
dma-fence: allow signaling drivers to set fence timestamp
dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf instead of fd
dma-buf: system_heap: Make sure to return an error if we abort
drm/amd/display: Fix system hang after multiple hotplugs (v3)
drm/amdgpu: fix shutdown and poweroff process failed with s0ix
drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALID
drm/i915: Enable -Wuninitialized
drm/amd/display: Remove Assert from dcn10_get_dig_frontend
drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
Revert "drm/amd/display: reuse current context instead of recreating one"
drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics
fbdev: atyfb: add stubs for aty_{ld,st}_lcd()
drm/i915/gvt: Introduce per object locking in GVT scheduler.
drm/i915/gvt: Purge dev_priv->gt
drm/i915/gvt: Parse default state to update reg whitelist
dt-bindings: dp-connector: Drop maxItems from -supply
...
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
-----BEGIN PGP SIGNATURE-----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=sLxb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
In Bspec the TGL TypeC ports are TC1-6, the AUX power well request flags
are USBC1-6/TBT1-6, so for clarity use these names in the port power
domain names instead of the D-I terminology (which Bspec uses only for
the ICL TypeC ports).
A domain name should follow the <domain>_<pipe/transcoder/port/aux_ch>
format. Add the new aliases based on this, leaving a change to rename
all the rest accordingly for a follow-up.
No functional change.
v2: Add comment to commit log about unifying domain names. (Jose)
Cc: Souza Jose <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222210400.940158-1-imre.deak@intel.com
Even though GEN12+ HW supports PSR + DC3CO, DMC's HW DC3CO exit mechanism
has an issue with using of Selective Fecth and PSR2 manual tracking.
And as some GEN12+ platforms (RKL, ADL-S) don't support PSR2 HW tracking,
Selective Fetch will be enabled by default on that platforms.
Therefore if the system enables PSR Selective Fetch / PSR manual tracking,
it does not allow DC3CO dc state, in that case.
When this DC3CO exit issue is addressed while PSR Selective Fetch is
enabled, this restriction should be removed.
v2: Address Jose's review comment.
- Fix typo
- Move check routine of DC3CO ability to
tgl_dc3co_exitline_compute_config()
v3: Change the check routine of enablement of psr2 sel fetch. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222213006.1609085-1-gwan-gyeong.mun@intel.com
We tend to use output_format!=RGB as a shorthand for YCbCr, but
this fails if we have a disabled crtc where output_format==INVALID.
We're now getting some fail from intel_color_check() when we have:
hw.enable==false
hw.ctm!=NULL
output_format==INVALID
Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the
dumpster, and thus everything defaults to RGB when the crtc
is disabled.
This does beg the deeper question of how much of the state
should we in fact be validating when hw/uapi.enable==false.
And should we even be doing the uapi->hw copy when
uapi.enable==false? So far I've not been able to come up with
satisfactory answers for myself, so I'm putting it off for the
moment.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: 0aa5c3835c ("drm/i915: support two CSC module on gen11 and later")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 7e07c68f06)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-Wunintialized was disabled in commit c562746149 ("drm/i915: Disable
-Wuninitialized") because there were two warnings that were false
positives. The first was due to DECLARE_WAIT_QUEUE_HEAD_ONSTACK, which
was fixed in LLVM 9.0.0. The second was in busywait_stop, which was
fixed in LLVM 10.0.0 (issue 415). The kernel's minimum version for LLVM
is 10.0.1 so this warning can be safely enabled, where it has already
caught a couple bugs.
Link: https://github.com/ClangBuiltLinux/linux/issues/220
Link: https://github.com/ClangBuiltLinux/linux/issues/415
Link: https://github.com/ClangBuiltLinux/linux/issues/499
Link: 2e040398f8
Link: c667cdc850
Fixes: c562746149 ("drm/i915: Disable -Wuninitialized")
References: 2ea4a7ba9b ("drm/i915/gt: Avoid uninitialized use of rpcurupei in frequency_show")
References: 2034c2129b ("drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216212953.24458-1-nathan@kernel.org
(cherry picked from commit b2423184ac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Read and debug log the eDP sink MSO configuration. Do not actually do
anything with the information yet besides logging.
FIXME: The pixel overlap is present in DisplayID 2.0, but we don't have
parsing for that. Assume zero for now. We could also add quirks for
non-zero pixel overlap before DisplayID 2.0 parsing.
v3: Add placeholder for pixel overlap.
v2: Rename intel_dp_mso_init -> intel_edp_mso_init
Cc: Nischal Varide <nischal.varide@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24ef61574e5af12cd86d5b85afbfbd4ac2f9de25.1613054234.git.jani.nikula@intel.com
This will set the right value of source_support when the port
encoder/port supports PSR but sink don't.
This change will also be needed in future for panel replay as psr
struct needs to be initialized even if disconnected or current sink
don't support PSR.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-4-jose.souza@intel.com
If source_support is set the platform supports PSR so no need to check
it again at every CAN_PSR().
Also removing the intel_dp_is_edp() calls, if sink_support is set
the sink connected is for sure a eDP panel.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-3-jose.souza@intel.com
There is no support for two pipes one transcoder for PSR and if we had
that the current code should not use cpu_transcoder.
Also I can't see a scenario where crtc_state->enable_psr2_sel_fetch is
set and PSR is not enabled and if by a bug it happens PSR HW will just
ignore any value in set in PSR2_MAN_TRK_CTL.
So dropping all the rest and keeping the same behavior that we have
with intel_psr2_program_plane_sel_fetch().
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-2-jose.souza@intel.com
Right now CI is blacklisting module reload, so we need to be able to
enable PSR2 selective fetch in run time to test this feature before
enable it by default.
Changes in IGT will also be needed.
v2:
- Fixed handling of I915_PSR_DEBUG_ENABLE_SEL_FETCH in
intel_psr_debug_set()
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209205036.351076-1-jose.souza@intel.com
To support ww locking and per-object implemented in i915, GVT scheduler needs
to be refined. Most of the changes are located in shadow batch buffer, shadow
wa context in GVT-g, where use quite a lot of i915 gem object APIs.
v2:
- Adjust the usage of ww lock on context pin/unpin. (maarten)
- Rebase the patch on the newest staging branch.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1610314985-26065-1-git-send-email-zhi.wang.linux@gmail.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Rather than break existing context objects by incorrectly forcing them
to rogue cache coherency and trying to assert a new mapping, read the
reg whitelist from the default context image.
And use gvt->gt, never &dev_priv->gt.
Fixes: 493f30cd08 ("drm/i915/gvt: parse init context to update cmd accessible reg whitelist")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Wang Zhi <zhi.a.wang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210129004933.29755-1-chris@chris-wilson.co.uk
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
According to Bspec #20124, max link rate table for DP was updated
at BDB version 230. Max link rate can support upto UHBR.
After migrate to BDB v230, the definition for LBR, HBR2 and HBR3
were changed. For backward compatibility. If BDB version was
from 216 to 229. Driver have to follow original rule to configure
DP max link rate value from VBT.
v2: split the mapping table to two for old and new BDB definition.
v3: return link rate instead of assigning it.
v4: remove the useless variable.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
[vsyrjala: Try to retain the comment that VBT version 216 added some of this]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218052333.16109-1-shawn.c.lee@intel.com
When we sanitize planes let's wait for the scanout to stop
before we let the subsequent code tear down the ggtt mappings
and whatnot. Cures an underrun on my ivb when I boot with
VT-d enabled and the BIOS fb gets thrown out due to stolen
being considered unusable with VT-d active.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210217162050.13803-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We tend to use output_format!=RGB as a shorthand for YCbCr, but
this fails if we have a disabled crtc where output_format==INVALID.
We're now getting some fail from intel_color_check() when we have:
hw.enable==false
hw.ctm!=NULL
output_format==INVALID
Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the
dumpster, and thus everything defaults to RGB when the crtc
is disabled.
This does beg the deeper question of how much of the state
should we in fact be validating when hw/uapi.enable==false.
And should we even be doing the uapi->hw copy when
uapi.enable==false? So far I've not been able to come up with
satisfactory answers for myself, so I'm putting it off for the
moment.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: 0aa5c3835c ("drm/i915: support two CSC module on gen11 and later")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
-Wunintialized was disabled in commit c562746149 ("drm/i915: Disable
-Wuninitialized") because there were two warnings that were false
positives. The first was due to DECLARE_WAIT_QUEUE_HEAD_ONSTACK, which
was fixed in LLVM 9.0.0. The second was in busywait_stop, which was
fixed in LLVM 10.0.0 (issue 415). The kernel's minimum version for LLVM
is 10.0.1 so this warning can be safely enabled, where it has already
caught a couple bugs.
Link: https://github.com/ClangBuiltLinux/linux/issues/220
Link: https://github.com/ClangBuiltLinux/linux/issues/415
Link: https://github.com/ClangBuiltLinux/linux/issues/499
Link: 2e040398f8
Link: c667cdc850
Fixes: c562746149 ("drm/i915: Disable -Wuninitialized")
References: 2ea4a7ba9b ("drm/i915/gt: Avoid uninitialized use of rpcurupei in frequency_show")
References: 2034c2129b ("drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216212953.24458-1-nathan@kernel.org
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
The surface_state_base is an offset into the batch, so we need to pass
the correct batch address for STATE_BASE_ADDRESS.
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20210210122728.20097-1-chris@chris-wilson.co.uk
(cherry picked from commit 1914911f4aa08ddc05bae71d3516419463e0c567)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.
On ilk/snb/ivb it looks like the accesses just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.
Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.
And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.
Fixes: 6ede6b0616 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054ad ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e240c ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13a ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 59fb8218c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo also exported some functions from intel_display.c during backport]
Instead of every new platform having yet another masive
copy of the whole PLL sanitation code, let's just reuse the
.disable_clock() hook for this purpose. We do need to plug
this into the ICL+ DSI code for that, but fortunately it
already has a suitable function we can use.
We do lose the debug message though on account of not bothering
to check if the clock is actually enabled or not before turning
it off. We could introduce yet another vfunc to query the current
state, but not sure it's worth the hassle?
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-14-ville.syrjala@linux.intel.com
Since .{enable,disable}_clock() are already vfuncs it's a bit silly to
have if-ladders inside them. Just provide specialized version for adl-s
and rkl so we don't need any of that.
v2: s/dev_priv/i915/ (Lucas)
Fix typos in platform names (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-13-ville.syrjala@linux.intel.com
The other DDI .enable_clock() functions are trying to protect us
against pll==NULL. A bit tempted to throw out all the WARNs as
just unnecessary noise, but I guess they might have some use
when poking around the shared_dpll code (not sure it wouldn't
oops elsewhere though). So let's unify it all and sprinkle in
the missing WARNs for icl/dg1.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-11-ville.syrjala@linux.intel.com
The current code attempts to protect the RMWs into global
clock routing registers with a mutex, but forgets to do so
in a few places. Let's remedy that.
Note that at the moment we serialize all modesets onto single
wq, so this shouldn't actually matter. But maybe one day we
wish to attempt parallel modesets again...
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-10-ville.syrjala@linux.intel.com
For ICL+ we have several styles of clock routing for DDIs:
1) TC DDI + TC PHY
-> needs DDI_CLK_SEL==MG/TBT part form intel_ddi_clk_{select,disable}()
and ICL_DPCLKA_CFGCR0_TC_CLK_OFF part form icl_{map,unmap}_plls_to_ports()
2) ICL/TGL combo DDI + combo PHY
-> just need the stuff from icl_{map,unmap}_plls_to_ports()
3) JSL/EHL TC DDI + combo PHY
-> needs DDI_CLK_SEL==MG part from intel_ddi_clk_{select,disable}() and
the full combo style clock selection from icl_{map,unmap}_plls_to_ports()
4) ADLS/RKL
-> these use both TC and combo DDIs with combo PHYs, however they
always use the full combo style clock selection as per
icl_{map,unmap}_plls_to_ports() and do not use DDI_CLK_SEL at all,
thus get treated the same as 2)
We extract all that from the current mess in the following way:
1) icl_ddi_tc_{enable,disable}_clock()
2) icl_ddi_combo_{enable,disable}_clock()
3) jsl_ddi_tc_{enable,disable}_clock()
4) for now we reuse icl_ddi_combo_{enable,disable}_clock() here
v2: s/dev_priv/i915/ (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-8-ville.syrjala@linux.intel.com
