Some device specific IOMMU parent drivers have long standing bogus
behaviour that mistakenly clean up the maps during .reset. By
definition, this is violation to the on-chip IOMMU ops (i.e. .set_map,
or .dma_map & .dma_unmap) in those offending drivers, as the removal of
internal maps is completely agnostic to the upper layer, causing
inconsistent view between the userspace and the kernel. Some userspace
app like QEMU gets around of this brokenness by proactively removing and
adding back all the maps around vdpa device reset, but such workaround
actually penaltize other well-behaved driver setup, where vdpa reset
always comes with the associated mapping cost, especially for kernel
vDPA devices (use_va=false) that have high cost on pinning. It's
imperative to rectify this behaviour and remove the problematic code
from all those non-compliant parent drivers.
However, we cannot unconditionally remove the bogus map-cleaning code
from the buggy .reset implementation, as there might exist userspace
apps that already rely on the behaviour on some setup. Introduce a
.compat_reset driver op to keep compatibility with older userspace. New
and well behaved parent driver should not bother to implement such op,
but only those drivers that are doing or used to do non-compliant
map-cleaning reset will have to.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1697880319-4937-5-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Userspace needs this feature flag to distinguish if vhost-vdpa iotlb in
the kernel can be trusted to persist IOTLB mapping across vDPA reset.
Without it, userspace has no way to tell apart if it's running on an
older kernel, which could silently drop all iotlb mapping across vDPA
reset, especially with broken parent driver implementation for the
.reset driver op. The broken driver may incorrectly drop all mappings of
its own as part of .reset, which inadvertently ends up with corrupted
mapping state between vhost-vdpa userspace and the kernel. As a
workaround, to make the mapping behaviour predictable across reset,
userspace has to pro-actively remove all mappings before vDPA reset, and
then restore all the mappings afterwards. This workaround is done
unconditionally on top of all parent drivers today, due to the parent
driver implementation issue and no means to differentiate. This
workaround had been utilized in QEMU since day one when the
corresponding vhost-vdpa userspace backend came to the world.
There are 3 cases that backend may claim this feature bit on for:
- parent device that has to work with platform IOMMU
- parent device with on-chip IOMMU that has the expected
.reset_map support in driver
- parent device with vendor specific IOMMU implementation with
persistent IOTLB mapping already that has to specifically
declare this backend feature
The reason why .reset_map is being one of the pre-condition for
persistent iotlb is because without it, vhost-vdpa can't switch back
iotlb to the initial state later on, especially for the on-chip IOMMU
case which starts with identity mapping at device creation. virtio-vdpa
requires on-chip IOMMU to perform 1:1 passthrough translation from PA to
IOVA as-is to begin with, and .reset_map is the only means to turn back
iotlb to the identity mapping mode after vhost-vdpa is gone.
The difference in behavior did not matter as QEMU unmaps all the memory
unregistering the memory listener at vhost_vdpa_dev_start( started =
false), but the backend acknowledging this feature flag allows QEMU to
make sure it is safe to skip this unmap & map in the case of vhost stop
& start cycle.
In that sense, this feature flag is actually a signal for userspace to
know that the driver bug has been solved. Not offering it indicates that
userspace cannot trust the kernel will retain the maps.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-4-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Devices with on-chip IOMMU or vendor specific IOTLB implementation may
need to restore iotlb mapping to the initial or default state using the
.reset_map op, as it's desirable for some parent devices to not work
with DMA ops and maintain a simple IOMMU model with .reset_map. In
particular, device reset should not cause mapping to go away on such
IOTLB model, so persistent mapping is implied across reset. Before the
userspace process using vhost-vdpa is gone, give it a chance to reset
iotlb back to the initial state in vhost_vdpa_cleanup().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-3-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Some device specific IOMMU parent drivers have long standing bogus
behavior that mistakenly clean up the maps during .reset. By definition,
this is violation to the on-chip IOMMU ops (i.e. .set_map, or .dma_map &
.dma_unmap) in those offending drivers, as the removal of internal maps
is completely agnostic to the upper layer, causing inconsistent view
between the userspace and the kernel. Some userspace app like QEMU gets
around of this brokenness by proactively removing and adding back all
the maps around vdpa device reset, but such workaround actually penalize
other well-behaved driver setup, where vdpa reset always comes with the
associated mapping cost, especially for kernel vDPA devices
(use_va=false) that have high cost on pinning. It's imperative to
rectify this behavior and remove the problematic code from all those
non-compliant parent drivers.
The reason why a separate .reset_map op is introduced is because this
allows a simple on-chip IOMMU model without exposing too much device
implementation detail to the upper vdpa layer. The .dma_map/unmap or
.set_map driver API is meant to be used to manipulate the IOTLB
mappings, and has been abstracted in a way similar to how a real IOMMU
device maps or unmaps pages for certain memory ranges. However, apart
from this there also exists other mapping needs, in which case 1:1
passthrough mapping has to be used by other users (read virtio-vdpa). To
ease parent/vendor driver implementation and to avoid abusing DMA ops in
an unexpacted way, these on-chip IOMMU devices can start with 1:1
passthrough mapping mode initially at the time of creation. Then the
.reset_map op can be used to switch iotlb back to this initial state
without having to expose a complex two-dimensional IOMMU device model.
The .reset_map is not a MUST for every parent that implements the
.dma_map or .set_map API, because device may work with DMA ops directly
by implement their own to manipulate system memory mappings, so don't
have to use .reset_map to achieve a simple IOMMU device model for 1:1
passthrough mapping.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1697880319-4937-2-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Some buggy devices, the common cfg size may not match the features.
This patch checks the common cfg size for the
features(VIRTIO_F_NOTIF_CONFIG_DATA, VIRTIO_F_RING_RESET). When the
common cfg size does not match the corresponding feature, we fail the
probe and print error message.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231019034902.7346-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add checks to the check_offsets(void) for queue_notify_data and
queue_reset.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231010031120.81272-5-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
in the relevant header file.
This feature indicates that the driver uses the data provided by the
device as a virtqueue identifier in available buffer notifications.
It comes from here:
https://github.com/oasis-tcs/virtio-spec/issues/89
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20231010031120.81272-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <2023100643-tricolor-citizen-6c2d@gregkh>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <b57b882675809f1f9dacbf42cf6b920b2bea9cba.1695903476.git.geert+renesas@glider.be>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Finally following up to Simon's suggestion for some kdoc attention
on struct virtio_pci_modern_device.
Link: https://lore.kernel.org/netdev/ZE%2FQS0lnUvxFacjf@corigine.com/
Cc: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230911213104.14391-1-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fix the wrong drivers_autoprobe path name in the document
Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Message-Id: <20230821011535.1117-1-shawn.shao@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
As Eli Cohen moved to other work, I'll be the contact point for
mlx5_vdpa.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230925160654.1558627-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After commit 68f2736a85 ("mm: Convert all PageMovable users to
movable_operations"), the execution path has been changed to
move_to_new_folio
movable_operations->migrate_page
balloon_page_migrate
balloon_page_migrate->balloon_page_migrate
balloon_page_migrate
Correct the outdated comment.
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Message-Id: <20230813140709.835536-1-xueshi.hu@smartx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Offer this backend feature as mlx5 is compatible with it. It allows it
to do live migration with CVQ, dynamically switching between passthrough
and shadow virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230703142514.363256-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For the following sequence:
- cvq group is in ASID 0
- .set_map(1, cvq_iotlb)
- .set_group_asid(cvq_group, 1)
... the cvq mapping from ASID 0 will be used. This is not always correct
behaviour.
This patch adds support for the above mentioned flow by saving the iotlb
on each .set_map and updating the cvq iotlb with it on a cvq group change.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-18-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
They will be used in a follow-up patch.
For dup_iotlb, avoid the src == dst case. This is an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-17-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Vq descriptor mappings are supported in hardware by filling in an
additional mkey which contains the descriptor mappings to the hw vq.
A previous patch in this series added support for hw mkey (mr) creation
for ASID 1.
This patch fills in both the vq data and vq descriptor mkeys based on
group ASID mapping.
The feature is signaled to the vdpa core through the presence of the
.get_vq_desc_group op.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-16-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Introduce the vq descriptor group and mr per ASID. Until now
.set_map on ASID 1 was only updating the cvq iotlb. From now on it also
creates a mkey for it. The current patch doesn't use it but follow-up
patches will add hardware support for mapping the vq descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-15-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The current flow for updating an mr works directly on mvdev->mr which
makes it cumbersome to handle multiple new mr structs.
This patch makes the flow more straightforward by having
mlx5_vdpa_create_mr return a new mr which will update the old mr (if
any). The old mr will be deleted and unlinked from mvdev. For the case
when the iotlb is empty (not NULL), the old mr will be cleared.
This change paves the way for adding mrs for different ASIDs.
The initialized bool is no longer needed as mr is now a pointer in the
mlx5_vdpa_dev struct which will be NULL when not initialized.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-14-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The mutex is named like it is supposed to protect only the mkey but in
reality it is a global lock for all mr resources.
Shift the mutex to it's rightful location (struct mlx5_vdpa_dev) and
give it a more appropriate name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-13-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This patch adapts the mr creation/deletion code to be able to work with
any given mr struct pointer. All the APIs are adapted to take an extra
parameter for the mr.
mlx5_vdpa_create/delete_mr doesn't need a ASID parameter anymore. The
check is done in the caller instead (mlx5_set_map).
This change is needed for a followup patch which will introduce an
additional mr for the vq descriptor data.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-12-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Make mlx5_destroy_mr symmetric to mlx5_create_mr.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Now that the cvq code is out of mlx5_vdpa_create/destroy_mr, the "dvq"
functions can be folded into their callers.
Having "dvq" in the naming will no longer be accurate in the downstream
patches.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The reslock is taken while refresh is called but iommu_lock is more
specific to this resource. So take the iommu_lock during cvq iotlb
refresh.
Based on Eugenio's patch [0].
[0] https://lore.kernel.org/lkml/20230112142218.725622-4-eperezma@redhat.com/
Acked-by: Jason Wang <jasowang@redhat.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The handling of the cvq iotlb is currently coupled with the creation
and destruction of the hardware mkeys (mr).
This patch moves cvq iotlb handling into its own function and shifts it
to a scope that is not related to mr handling. As cvq handling is just a
prune_iotlb + dup_iotlb cycle, put it all in the same "update" function.
Finally, the destruction path is handled by directly pruning the iotlb.
After this move is done the ASID mr code can be collapsed into a single
function.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Necessary for upcoming cvq separation from mr allocation.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
With _F_DESC_ASID backend feature, the device can now support the
VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor
table (including avail and used ring) in a different group than the
buffers it contains. This new uAPI will fetch the group ID of the
descriptor table.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Userspace knows if the device has dedicated descriptor group or not
by checking this feature bit.
It's only exposed if the vdpa driver backend implements the
.get_vq_desc_group() operation callback. Userspace trying to negotiate
this feature when it or the dependent _F_IOTLB_ASID feature hasn't
been exposed will result in an error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
In some cases, the access to the virtqueue's descriptor area, device
and driver areas (precluding indirect descriptor table in guest memory)
may have to be confined to a different address space than where its
buffers reside. Without loss of simplicity and generality with already
established terminology, let's fold up these 3 areas and call them
as a whole as descriptor table group, or descriptor group for short.
Specifically, in case of split virtqueues, descriptor group consists of
regions for Descriptor Table, Available Ring and Used Ring; for packed
virtqueues layout, descriptor group contains Descriptor Ring, Driver
and Device Event Suppression structures.
The group ID for a dedicated descriptor group can be obtained through a
new .get_vq_desc_group() op. If driver implements this op, it means that
the descriptor, device and driver areas of the virtqueue may reside
in a dedicated group than where its buffers reside, a.k.a the default
virtqueue group through the .get_vq_group() op.
In principle, the descriptor group may or may not have same group ID
as the default group. Even if the descriptor group has a different ID,
meaning the vq's descriptor group areas can optionally move to a
separate address space than where guest memory resides, the descriptor
group may still start from a default address space, same as where its
buffers reside. To move the descriptor group to a different address
space, .set_group_asid() has to be called to change the ASID binding
for the group, which is no different than what needs to be done on any
other virtqueue group. On the other hand, the .reset() semantics also
applies on descriptor table group, meaning the device reset will clear
all ASID bindings and move all virtqueue groups including descriptor
group back to the default address space, i.e. in ASID 0.
QEMU's shadow virtqueue is going to utilize dedicated descriptor group
to speed up map and unmap operations, yielding tremendous downtime
reduction by avoiding the full and slow remap cycle in SVQ switching.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This merges a single commit that contains changes to mlx5_ifc.h
It's required to support vq descriptor mappings in mlx5/vdpa
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Fix a possible CPU hotplug deadlock bug caused by the new
TSC synchronization code.
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc.
- Add a new Intel CPU model number to <asm/intel-family.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k19e
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments.
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmU82MUbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMZ0H+wZHWVUsmqGLGNCt3gfi
m2EJX83VMwY8PzpwZ5ezrx4ibAcUyo7Dhh8OniGgEazC3BNeggoUu/HwpirS22gI
Tx0EMlgLOJQykauiUe6FPem0IbrlbQMI1gLplx6cVd8lgIYZQfMIM5gI0kuCywT3
Ka9sCgp6y3UKQNtHKFwtPRLYFTF3Afyy2C01wdsa800SEqeOAeTD9+8yz7ZnuFt+
bNgu6vJGFfJHkEkvYCwFFqZ1eIfXON6lUFpijNpCGvMN2h1XArLexSk8JRBf6j2+
8+1FrRQsTXRk3G6v9uQABeK7z5W2F8gufmSFyBlXajbZp2HT6j4s2S86u5lP9P9J
l1U=
=etyx
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmU9Lt8LHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYM2DxAAt01E6LudY/THouSHpUri8HnDUeNLEY/3AppdMrLs
gNs+KhBZqXJlRFbbIjiQCnzuKJg6fMQHjrPiMkXsAzq4vklQOfywSxtcWOsSCSTl
pN2pY7nYuSBLlum0qkwu9E1rtfx1FN58Z0SlmsGUqCb0GbsmNEKhJcGz/peaQi0+
/Y4mqr7O5OXFbzLZMtB86XCPpVDoyjGVWFUJB6Ruz82zbmMqXs1P7JGaiv/aFn0y
Diy1iNUrhluCAVbskoNHcFTXU1uHn+7JrMJGS7Usj49OyqfKSK6nhMEh5Kpe6ATg
szmMxBknHBOfEb+ciHzvSna44+hx845Z2ylMtRUn6IXmWNsdrYP4zTkV+W5ioMHn
QaE4Il+VuxHBL0Hy6tLHDElP/7Xx9o+KS6PJ/56Q5Qi360ZmjQCGTzum//9r0JB0
LPFmWN5TMBYGd0uBp9kddIUl2MPiXdHulK8CZgdC+4o/KOnjINACFjynyKKyEEW9
HZqWu6aoKwCfcsr9Wz+CZVnpvxPoP5b+BpwOJntrdqNtVycUOIe4z3ILuw1Vfs9P
zkZ61QDk4N3vwBiqEiGDBwYVX0pq4/e1YHbxBOuLKUlYbmnHHLxp+PXDxKiaVbJc
FyZUtN8I4hzvpH6RnX/W/UUz02nBpxcnamHUnXOEBorV3tJatvxav2A4QQJbBuqo
M4w=
=8Jfz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
Here are some very small driver fixes for 6.6-final that have shown up
in the past 2 weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZTy13A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykHzACdHeaGvszwWwcjHX0SmZBRNbHoj80AnRaM0RP0
SpAvYj7k79XtxOH0KTe0
=y5Zi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Plus, fixing an of node leak pattern in the mux subsystem.
-----BEGIN PGP SIGNATURE-----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=bIWp
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's gateclk_ops
that was ruining uart output because the divider was forgotten about
-----BEGIN PGP SIGNATURE-----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=Hghf
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes, one for the clk framework and two for clk drivers:
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's
gateclk_ops that was ruining uart output because the divider
was forgotten about"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
clk: socfpga: gate: Account for the divider in determine_rate
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZTxSwQAKCRBZ7Krx/gZQ
6zadAP9o/724KPDCY3ybgwKyEQ1UNjHTriFRBeoF3o2q0WgidwEA+/xS0Xk3i25w
xnSZO/8My1edE1IcK/JDwewH/J+4Kw0=
=N/Lv
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
Recent changes to count number of matching symbols when creating
a kprobe event failed to take into account kernel modules. As such, it
breaks kprobes on kernel module symbols, by assuming there is no match.
Fix this my calling module_kallsyms_on_each_symbol() in addition to
kallsyms_on_each_match_symbol() to perform a proper counting.
Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/
Cc: Francis Laniel <flaniel@linux.microsoft.com>
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: b022f0c7e4 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=Zgmk
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Fix for an issue reported where reading fdinfo could find a NULL
thread as we didn't properly synchronize, and then a disable for the
IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
that could lead to deadlocks if the task issued async O_DIRECT writes
and then proceeded to do sync fallocate() calls"
* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
io_uring/rw: disable IOCB_DIO_CALLER_COMP
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b3312 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b3312 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=sKO6
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"Just a single fix for a potential divide-by-zero, introduced in this
cycle"
* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
blk-throttle: check for overflow in calculate_bytes_allowed
A single patch to fix a regression introduced by the recent
suspend/resume fixes. The regression is that ATA disks are not stopped
on system shutdown, which is not recommended and increases the disks
SMART counters for unclean power off events. This patch fixes this by
refining the recent rework of the scsi device manage_xxx flags.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZTtnHAAKCRDdoc3SxdoY
dqksAP95dLIScPn8PTW2oy2O+LHW1g67XVziTY5nce7byqNJwQEA/q8cRw2LYzB3
ELPZElQzlAgD47JqC2YFIHbomnqEagU=
=fC3T
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/resume fixes.
The regression is that ATA disks are not stopped on system shutdown,
which is not recommended and increases the disks SMART counters for
unclean power off events.
This patch fixes this by refining the recent rework of the scsi device
manage_xxx flags"
* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: sd: Introduce manage_shutdown device flag
A single patch to extend the AMD PMC driver DMI quirk list for laptops
which need special handling to avoid NVME s2idle suspend/resume errors.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmU7zV8UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9waqAf+K0ywpbycM5LAwj2cvlifeoUFIdxu
gTujd5Da+8aFlxiHyvTjfKWdowAHRxgKsfLH7OlHGjH/EWL0vxQrfQt/ry0DvCuW
fwvAA5FviLJJgs7xymko3dVwW7XCZrvMQYuOyY1SPLeHDutCGc26XjlxXv30vPsK
XUv+Cm13SrTzozW/GY/4Cq6cIoXUkGypH4H3aXSgRTG6ce4H87maVNbg3XFzI0Lo
LKb503v4Uix7jNXtGBin7PnrbRXVyIOQDrzRMaSkb32Y6zcmmDpY8xqh3/qopLKb
mCkPS8+QIcld2DLwOxXGeQJsWKcUdi7xOpUTlJ7yOClXEhfTDEDsiVZ82g==
=Bzmt
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"A single patch to extend the AMD PMC driver DMI quirk list
for laptops which need special handling to avoid NVME s2idle
suspend/resume errors"
* tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: Add s2idle quirk for more Lenovo laptops
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
Si-Wei Liu