[ Upstream commit 7affb86ef6 ]
UAR0 CTS/RTS is not wired to any pin and is not used for the default
serial console use of UART0 on ROCK Pi S.
Override the SoC defined pinctrl props to limit configuration of the
two xfer pins wired to one of the GPIO pin headers.
Fixes: 2e04c25b13 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-6-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc0daeccc3 ]
Add cap-mmc-highspeed to allow use of high speed MMC mode using an eMMC
to uSD board. Use disable-wp to signal that no physical write-protect
line is present. Also add vcc_io used for card and IO line power as
vmmc-supply.
Fixes: 2e04c25b13 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98a0c4f227 ]
15 qcom platform DTSI files define an adreno_smmu node.
msm8998 is the only one with adreno_smmu disabled by default.
There's no reason why this SMMU should be disabled by default,
it doesn't need any further configuration.
Bring msm8998 in line with the 14 other platforms.
This fixes GPU init failing with ENODEV:
msm_dpu c901000.display-controller: failed to load adreno gpu
msm_dpu c901000.display-controller: failed to bind 5000000.gpu (ops a3xx_ops): -19
Fixes: 87cd46d68a ("Configure Adreno GPU and related IOMMU")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/be51d1a4-e8fc-48d1-9afb-a42b1d6ca478@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1aefeae8c ]
The USB PHYs don't use extcon connectors, drop the extcon property from
the hsusb_phy1 node.
Fixes: 46680fe9ba ("arm64: dts: qcom: msm8996: Add support for the Xiaomi MSM8996 platform")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-13-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fad58a41b8 upstream.
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: c65a4ed2ea ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae4837871 upstream.
For Gen-1 targets like IPQ6018, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 20bb9e3dd2 ("arm64: dts: qcom: ipq6018: add usb3 DT description")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44ea1ae3cf upstream.
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 1e39255ed2 ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d201c92bff upstream.
Correct the specified regulator-min-microvolt value for the buck DCDC_REG2
regulator, which is part of the Rockchip RK809 PMIC, in the Pine64 Quartz64
Model B board dts. According to the RK809 datasheet, version 1.01, this
regulator is capable of producing voltages as low as 0.5 V on its output,
instead of going down to 0.9 V only, which is additionally confirmed by the
regulator-min-microvolt values found in the board dts files for the other
supported boards that use the same RK809 PMIC.
This allows the DVFS to clock the GPU on the Quartz64 Model B below 700 MHz,
all the way down to 200 MHz, which saves some power and reduces the amount of
generated heat a bit, improving the thermal headroom and possibly improving
the bursty CPU and GPU performance on this board.
This also eliminates the following warnings in the kernel log:
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (200000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (300000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (400000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators (600000000)
Fixes: dcc8c66bef ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Cc: stable@vger.kernel.org
Reported-By: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/e70742ea2df432bf57b3f7de542d81ca22b0da2f.1716225483.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2a52f6788 ]
The nodename, <name>-gpio, of referenced pinctrl nodes for the two LEDs
on the ROCK Pi S cause DT schema validation error:
leds: green-led-gpio: {'rockchip,pins': [[0, 6, 0, 90]], 'phandle': [[98]]} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
leds: heartbeat-led-gpio: {'rockchip,pins': [[0, 5, 0, 90]], 'phandle': [[99]]} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
Rename the pinctrl nodes and symbols to pass DT schema validation, also
extend LED nodes with information about color and function.
Fixes: 2e04c25b13 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-7-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fb98c855c ]
Radxa ROCK Pi S have optional onboard SD NAND on board revision v1.1,
v1.2 and v1.3, revision v1.5 changed to use optional onboard eMMC.
The optional SD NAND typically fails to initialize:
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
mmc0: error -110 whilst initialising SD card
Add pinctrl and cap-sd-highspeed to fix SD NAND initialization. Also
drop bus-width and mmc-hs200-1_8v to fix eMMC initialization on the new
v1.5 board revision, only 3v3 signal voltage is used.
Fixes: 2e04c25b13 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-4-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3882564a7 upstream.
Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.
This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc8 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.
Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.
Cc: stable@vger.kernel.org
Fixes: 48166e6ea4 ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6db1208bf9 ]
An unintended consequence of commit 9c573cd313 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd313 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dfd239a039 upstream.
The gpio in "reg_usdhc2_vmmc" should be 7 instead of 19.
Cc: stable@vger.kernel.org
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d92e4a7ff upstream.
When tearing down a redistributor region, make sure we don't have
any dangling pointer to that region stored in a vcpu.
Fixes: e5a3563546 ("kvm: arm64: vgic-v3: Introduce vgic_v3_free_redist_region()")
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240605175637.1635653-1-maz@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67cc6125fb ]
SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.
Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.
Fixes: 60f01b5b5c ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 819fe8c96a ]
There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:
- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
TX. If sdhc driver probes after dwmac driver, it reconfigures
gpio4 and this breaks Ethernet MAC.
- pinctrl configuration mentions gpio96 as CD pin. It seems it was
copied from some SM8150 example, because as mentioned above,
correct CD pin is gpio4 on PMM8155AU_1.
This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.
Fixes: 0deb2624e2 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@vger.kernel.org
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c92e8b9eac upstream.
We recently upgraded the view of ESR_EL2 to 64bit, in keeping with
the requirements of the architecture.
However, the AArch32 emulation code was left unaudited, and the
(already dodgy) code that triages whether a trap is spurious or not
(because the condition code failed) broke in a subtle way:
If ESR_EL2.ISS2 is ever non-zero (unlikely, but hey, this is the ARM
architecture we're talking about), the hack that tests the top bits
of ESR_EL2.EC will break in an interesting way.
Instead, use kvm_vcpu_trap_get_class() to obtain the EC, and list
all the possible ECs that can fail a condition code check.
While we're at it, add SMC32 to the list, as it is explicitly listed
as being allowed to trap despite failing a condition code check (as
described in the HCR_EL2.TSC documentation).
Fixes: 0b12620fdd ("KVM: arm64: Treat ESR_EL2 as a 64-bit register")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfe6d190f3 upstream.
It appears that we don't allow a vcpu to be restored in AArch32
System mode, as we *never* included it in the list of valid modes.
Just add it to the list of allowed modes.
Fixes: 0d854a60b1 ("arm64: KVM: enable initialization of a 32bit vcpu")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 947051e361 upstream.
When userspace writes to one of the core registers, we make
sure to narrow the corresponding GPRs if PSTATE indicates
an AArch32 context.
The code tries to check whether the context is EL0 or EL1 so
that it narrows the correct registers. But it does so by checking
the full PSTATE instead of PSTATE.M.
As a consequence, and if we are restoring an AArch32 EL0 context
in a 64bit guest, and that PSTATE has *any* bit set outside of
PSTATE.M, we narrow *all* registers instead of only the first 15,
destroying the 64bit state.
Obviously, this is not something the guest is likely to enjoy.
Correctly masking PSTATE to only evaluate PSTATE.M fixes it.
Fixes: 90c1f934ed ("KVM: arm64: Get rid of the AArch32 register mapping code")
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 428a575dc9 upstream.
During boot, Linux kernel complains:
[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.
With this patch:
[ 0.000000] GIC: Using split EOI/Deactivate mode
So this should be the correct fix.
Fixes: 2f20182ed6 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219-cache-v3-1-a33c57534ae9@outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f390a77f upstream.
The 'local-bd-address' property is used to pass a unique Bluetooth
device address from the boot firmware to the kernel and should otherwise
be left unset so that the OS can prevent the controller from being used
until a valid address has been provided through some other means (e.g.
using btmgmt).
Fixes: 60f77ae7d1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2633c58e13 upstream.
There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:
tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)
Fixes: 0f279ebdf3 ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ffbf4fb9b5 ]
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: d0ffffe0 910003fd 91000000 9400000b (d4210000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: BRK handler: Fatal exception
Fix this by always aligning the end of a bug_entry to 4 bytes, which is
correct regardless of CONFIG_DEBUG_BUGVERBOSE.
Fixes: 9fb7410f95 ("arm64/BUG: Use BRK instruction for generic BUG traps")
Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com>
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72907de905 ]
The power-controller module works well by adding its parent
node secure-monitor.
Fixes: 085f7a298a ("arm64: dts: add support for S4 power domain controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240412-fix-secpwr-s4-v2-1-3802fd936d77@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 657eef0a54 upstream.
Currently CONFIG_ARM64_USE_LSE_ATOMICS depends upon CONFIG_JUMP_LABEL,
as the inline atomics were indirected with a static branch.
However, since commit:
21fb26bfb0 ("arm64: alternatives: add alternative_has_feature_*()")
... we use an alternative_branch (which is always available) rather than
a static branch, and hence the dependency is unnecessary.
Remove the stale dependency, along with the stale include. This will
allow the use of LSE atomics in kernels built with CONFIG_JUMP_LABEL=n,
and reduces the risk of circular header dependencies via <asm/lse.h>.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114125424.2998268-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ddb4f372f ]
vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.
Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not.
Cc: stable@vger.kernel.org
Fixes: 7d450e2821 ("KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7728c81a ]
When parsing a GICv2 attribute that contains a cpuid, handle this
as the vcpu_id, not a vcpu_idx, as userspace cannot really know
the mapping between the two. For this, use kvm_get_vcpu_by_id()
instead of kvm_get_vcpu().
Take this opportunity to get rid of the pointless check against
online_vcpus, which doesn't make much sense either, and switch
to FIELD_GET as a way to extract the vcpu_id.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6ddb4f372f ("KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc7d7447b5 ]
When __bpf_prog_enter() returns zero, the arm64 register x20 that stores
prog start time is not assigned to zero, causing incorrect runtime stats.
To fix it, assign the return value of bpf_prog_enter() to x20 register
immediately upon its return.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240416064208.2919073-2-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0ac417b8f1 upstream.
Q7_THRM# pin is connected to a diode on the module which is used
as a level shifter, and the pin have a pull-down enabled by
default. We need to configure it to internal pull-up, other-
wise whenever the pin is configured as INPUT and we try to
control it externally the value will always remain zero.
Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240308085243.69903-1-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 433d54818f ]
With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.
Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.
Fixes: f901aaadaa ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3baac7291e ]
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc51 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecb5b0034f ]
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 800dc93c39 ]
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9a6b8b5c6 ]
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 625000 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 260c04d425 ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-3-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 374a7c6400 ]
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 606250 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 3183cb62b0 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-2-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b12994918 ]
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b852ee68fd ("arm64: dts: mt8195: Add display node for vdosys0")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-3-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b0c1528e ]
Add the missing mediatek,gce-client-reg property to the vppsys and
vdosys nodes to allow them to use the GCE. This prevents the "can't
parse gce-client-reg property" error from being printed and should
result in better performance.
Fixes: 6aa5b46d17 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-2-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00bcc8810d ]
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b4b75bac95 ("arm64: dts: mt8192: Add display nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-1-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
