In the unlikely case the request completes while we regard it as not even
executing on the GPU (see the next patch!), we have to flush any pending
execution callbacks at retirement and ensure that we do not add any
more.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-4-chris@chris-wilson.co.uk
With the upcoming change to automanaged i915_active, the intent is that
whenever we wait on the set of active fences, they are signaled and
collected. The requirement is that all successful returns from
i915_request_wait() signal the fence, so fixup the one remaining path
where we may return before the interrupt has been run.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619112341.9082-3-chris@chris-wilson.co.uk
Since commit eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on
struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait()
has been defunct. Now go ahead and remove it from all callers.
References: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk
The process_csb routine from execlists_submission is incompatible with
the GuC backend. Add a warning to detect if we accidentally end up in
the wrong spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk
The idea behind keeping the saturation mask local to a context backfired
spectacularly. The premise with the local mask was that we would be more
proactive in attempting to use semaphores after each time the context
idled, and that all new contexts would attempt to use semaphores
ignoring the current state of the system. This turns out to be horribly
optimistic. If the system state is still oversaturated and the existing
workloads have all stopped using semaphores, the new workloads would
attempt to use semaphores and be deprioritised behind real work. The
new contexts would not switch off using semaphores until their initial
batch of low priority work had completed. Given sufficient backload load
of equal user priority, this would completely starve the new work of any
GPU time.
To compensate, remove the local tracking in favour of keeping it as
global state on the engine -- once the system is saturated and
semaphores are disabled, everyone stops attempting to use semaphores
until the system is idle again. One of the reason for preferring local
context tracking was that it worked with virtual engines, so for
switching to global state we could either do a complete check of all the
virtual siblings or simply disable semaphores for those requests. This
takes the simpler approach of disabling semaphores on virtual engines.
The downside is that the decision that the engine is saturated is a
local measure -- we are only checking whether or not this context was
scheduled in a timely fashion, it may be legitimately delayed due to user
priorities. We still have the same dilemma though, that we do not want
to employ the semaphore poll unless it will be used.
v2: Explain why we need to assume the worst wrt virtual engines.
Fixes: ca6e56f654 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk
To do frontbuffer tracking we are depending on Display WA #0884 to
exit PSR when there is a frontbuffer modification but according to
user reports a write to CURSURFLIVE do not cause PSR to exit in older
gens so lets force a PSR exit.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110799
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Thomas Rohwer <trohwer85@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617195154.30292-1-jose.souza@intel.com
This has caught me out on countless occasions, when we retrieve a pointer
from the submission/execlists backend, it does not carry a reference to
the context or ring. Those are only pinned while the request is active,
so if we see the request is already completed, it may be in the process
of being retired and those pointers defunct.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938
Fixes: 3a068721a9 ("drm/i915: Show ring->start for the ELSP context/request queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-2-chris@chris-wilson.co.uk
Be sure to cleanup after live_evict by flushing any residual state off
the GPU using igt_flush_test.
Tvrtko mentioned that it is probably wise to stop repeating this ad hoc
around the tests and implement a live test runner.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-1-chris@chris-wilson.co.uk
Previously, we wanted to shrink the pages of freed objects before they
were finally RCU collected. However, by removing the struct_mutex
serialisation around the active reference, we need to acquire an extra
reference around the wait. Unfortunately this means that we have to skip
objects that are waiting RCU collection.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110937
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-2-chris@chris-wilson.co.uk
Updates the live_workarounds selftest to handle whitelisted
registers that are flagged as read only.
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-5-John.C.Harrison@Intel.com
Updated whitelist table for ICL.
v2: Reduce changes to just those required for media driver until
the selftest can be updated to support the new features of the
other entries.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-4-John.C.Harrison@Intel.com
Newer hardware requires setting up whitelists on engines other than
render. So, extend the whitelist code to support all engines.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-3-John.C.Harrison@Intel.com
Newer hardware adds flags to the whitelist work-around register. These
allow per access direction privileges and ranges.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-2-John.C.Harrison@Intel.com
Rename pipe_config_err() to pipe_config_mismatch(), and also print
whether we're doing the fastset check or the sw vs. hw state readout
check. Should make the logs a bit less confusing when they're not
filled with what looks like a real error.
Also rename the 'adjust' variable to 'fastset' to make it clear what
it means.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Now that intel_pipe_config_compare() no longer clobbers the passed
in state we can make both crtc states const. And while at we simplify
the calling convention, and clean up intel_compare_link_m_n() a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
We're now calling intel_pipe_config_compare(..., true) uncoditionally
which means we're always going clobber the calculated M/N values with
the old values if the fuzzy M/N check passes. That causes problems
because the fuzzy check allows for a huge difference in the values.
I'm actually tempted to just make the M/N checks exact, but that might
prevent fastboot from kicking in when people want it. So for now let's
overwrite the computed values with the old values only if decide to skip
the modeset.
v2: Copy has_drrs along with M/N M2/N2 values
Cc: stable@vger.kernel.org
Cc: Blubberbub@protonmail.com
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Blubberbub@protonmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675
Fixes: d19f958db2 ("drm/i915: Enable fastset for non-boot modesets.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612172423.25231-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Since commit 1ba627148e ("drm: Add reservation_object to
drm_gem_object"), struct drm_gem_object grew its own builtin
reservation_object rendering our own private one bloat. Remove our
redundant reservation_object and point into obj->base.resv instead.
References: 1ba627148e ("drm: Add reservation_object to drm_gem_object")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618125858.7295-1-chris@chris-wilson.co.uk
Though we pin the context first before taking the pm wakeref, during
retire we need to unpin before dropping the pm wakeref (breaking the
"natural" onion). During the unpin, we may need to attach a cleanup
operation on to the engine wakeref, ergo we want to keep the engine
awake until after the unpin.
v2: Push the engine wakeref into the barrier so we keep the onion unwind
ordering in the request itself
Fixes: ce476c80b8 ("drm/i915: Keep contexts pinned until after the next kernel context switch")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-1-chris@chris-wilson.co.uk
If the user is clearing the log buffer too slowly, we overflow. As this
is an expected condition, and the driver tries to handle it, reduce the
error message down to a notice.
Michal mentioned that another cause would be incorrect reset handling,
so we don't want to lose the notification entirely.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110817
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617100917.13110-1-chris@chris-wilson.co.uk
Although EHL introduces a new PCH, the South Display part of the PCH
that we care about is nearly identical to ICP, just with some pins
remapped. Most notably, Port C is mapped to the pins that ICP uses for
TC Port 1.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190615004210.16656-1-matthew.d.roper@intel.com
Currently, we perform a locked update of the shadow entry when
allocating a page directory entry such that if two clients are
concurrently allocating neighbouring ranges we only insert one new entry
for the pair of them. However, we also need to serialise both clients
wrt to the actual entry in the HW table, or else we may allow one client
or even a third client to proceed ahead of the HW write. My handwave
before was that under the _pathological_ condition we would see the
scratch entry instead of the expected entry, causing a temporary
glitch. That starvation condition will eventually show up in practice, so
fix it.
The reason for the previous cheat was to avoid having to free the extra
allocation while under the spinlock. Now, we keep the extra entry
allocated until the end instead.
v2: Fix error paths for gen6
Fixes: 1d1b5490b9 ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617140426.7203-1-chris@chris-wilson.co.uk
In intel_package_header version 2 there's a new field in the
fw_info table that must be 0, otherwise it's not the correct DMC
firmware. Add a check for version 2 or later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-10-lucas.demarchi@intel.com
Complete the extraction of functions to parse specific parts of the
firmware. The return of the function parse_csr_fw() is now redundant
since it already sets the dmc_payload field. Changing it is left for
later to avoid noise in the commit.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-7-lucas.demarchi@intel.com
Like parse_csr_fw_css() this parses the package_header from firmware and
saves the relevant fields in the csr struct. In this function we also
lookup the fw_info we are interested in.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-6-lucas.demarchi@intel.com
Let's start splitting the parse function, making all of them return the
number of bytes parsed - different versions of the firmware header may
require different sizes for the structures.
v2: rework remaining bytes calculation on new protection for amount of
bytes read
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-5-lucas.demarchi@intel.com
Move fw_info out of struct intel_package_header to allow it to grow more
easily in future. To make a cleaner move, let's also extract a function to
search the header for the dmc_offset.
While reviewing this code I wondered why we continued the search even
after finding a suitable firmware. Add a comment to explain we will
continue to try to find a more specific firmware version, even if this
is not required by the spec.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-3-lucas.demarchi@intel.com
Change all fields in intel_package_header and intel_dmc_header whose
meaning are 1-byte numbers to use u8.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-2-lucas.demarchi@intel.com
Allocate all page directory variants with alloc_pd. As
the lvl3 and lvl4 variants differ in manipulation, we
need to check for existence of backing phys page before accessing
it.
v2: use err in returns
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-5-mika.kuoppala@linux.intel.com
All page directories are identical in function, only the position in the
hierarchy differ. Use same base type for directory functionality.
v2: cleanup, size always 512, init to null
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-2-mika.kuoppala@linux.intel.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613145229.21389-1-jani.nikula@intel.com
Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
ICL introduces a new gamma correction mode in display engine, called
multi-segmented-gamma mode. This mode allows users to program the
darker region of the gamma curve with sueprfine precision. An
example use case for this is HDR curves (like PQ ST-2084).
If we plot a gamma correction curve from value range between 0.0 to 1.0,
ICL's multi-segment has 3 different sections:
- superfine segment: 9 values, ranges between 0 - 1/(128 * 256)
- fine segment: 257 values, ranges between 0 - 1/(128)
- corase segment: 257 values, ranges between 0 - 1
This patch:
- Changes gamma LUTs size for ICL/GEN11 to 262144 entries (8 * 128 * 256),
so that userspace can program with highest precision supported.
- Changes default gamma mode (non-legacy) to multi-segmented-gamma mode.
- Adds functions to program/detect multi-segment gamma.
V2: Addressed review comments from Ville
- separate function for superfine and fine segments.
- remove enum for segments.
- reuse last entry of the LUT as gc_max value.
- replace if() ....cond with switch...case in icl_load_luts.
- add an entry variable, instead of 'word'
V3: Addressed review comments from Ville
- extra newline
- s/entry/color/
- remove LUT size checks
- program ilk_lut_12p4_ldw value before ilk_lut_12p4_udw
- Change the comments in description of fine and coarse segments,
and try to make more sense.
- use 8 * 128 instead of 1024
- add 1 entry in LUT for GCMAX
V4: Addressed review comments from Ville
- Remove unused macro
- missing shift entry in blue
- pick correct entry for GCMAX
- Added Ville's R-B
Note: Tested and confirmed the programming sequence of odd/even
registers in the HW. The correct sequence should be:
ilk_lut_12p4_udw
ilk_lut_12p4_ldw
v5: Addressed Ville's review comments and renamed odd/even register
helpers to be more consistent with the values.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-5-git-send-email-uma.shankar@intel.com
Add macros to define multi segmented gamma registers
V2: Addressed Ville's comments:
Add gen-lable before bit definition
Addressed Jani's comment
- Use REG_GENMASK() and REG_BIT()
V3: Addressed Ville's comments:
- Put comments at the end of line.
- Change the comment at start of ICL multisegmented gamma registers.
Added Ville's r-b
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-3-git-send-email-uma.shankar@intel.com
Currently, data type of gamma_lut_size & degamma_lut_size elements
in intel_device_info is u16, which means it can accommodate maximum
64k values. In case of ICL multisegmented gamma, the size of gamma
LUT is 256K.
This patch changes the data type of both of these elements to u32.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
V4: Added Uma's r-b.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-2-git-send-email-uma.shankar@intel.com
Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.
v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
Ensure intel_sdvo_regs.h is self-contained and remains that way.
v2:
- include <linux/compiler.h> for __packed (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613100818.24800-1-jani.nikula@intel.com
EHL defines two new MOCS table entries but is otherwise compatible with
the ICL MOCS table.
These table entries (16 and 17) should still be considered unused for
ICL and as such their behavior remains undefined for that platform.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530234014.22340-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
While we need to flush the wakeref before parking, we do not need to
perform the i915_gem_park() itself underneath the wakeref lock, merely
the struct_mutex. If we rearrange the locks, we can avoid the unnecessary
tainting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614220616.24932-1-chris@chris-wilson.co.uk
To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
