Use the correct fallback compatible for the BWMONv4 with merged global and
monitor register spaces.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-4-77a050c2fbda@linaro.org
With the gpio-line-names in place coming from SONY themselves, we can
now make the pin nodes and their labels to more closely resemble the
actual thing. 4k has been renamed to four_k due to dtc limitations.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-2-4cb80e187e38@linaro.org
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Yoshino devices DTs to better document the hardware.
Lilac and Poplar have identical pin assignments.
Diff between these two and maple:
TLMM:
- "NC",
+ "TS_VDDIO_EN",
PMI8998:
- "NC"
+ "USB_SWITCH_SEL"
- "NC"
+ "4K_DISP_DCDC_EN"
PM8005:
- "NC"
+ "EAR_EN"
Which is probably due to Maple being designed and released quite a bit
earlier than the other two and it having a super high tech true-4K
display.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-1-4cb80e187e38@linaro.org
The Poco F1 has a single color white notification LED. Enable the
Qualcomm Light Pulse Generator (LPG) driver based notification LED.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313154226.136726-1-joelselvaraj.oss@gmail.com
Add a DT node for Last level cache (aka. system cache) controller
which provides control over the last level cache present on QDU1000
and QRU1000 SoCs.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313125731.17745-1-quic_kbajaj@quicinc.com
The PMIC regulators are not supposed to have unit addresses.
Fixes: 2317b87a2a ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-8-krzysztof.kozlowski@linaro.org
The PMIC regulators are not supposed to have unit addresses.
Fixes: 60b214effb ("arm64: dts: qcom: msm8994-octagon: Configure regulators")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-7-krzysztof.kozlowski@linaro.org
The PMIC regulators are not supposed to have unit addresses.
Fixes: e9783584c9 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-6-krzysztof.kozlowski@linaro.org
This reverts commit 46546f2882 because it
mistakenly took PMIC pinctrl/GPIO as TLMM. The TLMM pinctrl uses "gpio"
function, but PMIC uses "normal", so original code was correct:
msm8998-oneplus-cheeseburger.dtb: pmic@2: gpio@c000:button-backlight-state: 'oneOf' conditional failed, one must be fixed:
'gpio' is not one of ['normal', 'paired', 'func1', 'func2', 'dtest1', 'dtest2', 'dtest3', 'dtest4', 'func3', 'func4']
Fixes: 46546f2882 ("arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-5-krzysztof.kozlowski@linaro.org
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: fb69f6adaf ("arm64: dts: qcom: sc7180: Add pazquel dts files")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-4-krzysztof.kozlowski@linaro.org
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 2c26adb8db ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-3-krzysztof.kozlowski@linaro.org
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
Herobrine boards which use elan,ekth3000 with valid VCC:
sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: ee2a621160 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-2-krzysztof.kozlowski@linaro.org
gpio-key bindings expect children to be named with generic prefix:
sda660-inforce-ifc6560.dtb: gpio-keys: 'volup' does not match any of the regexes: ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-1-krzysztof.kozlowski@linaro.org
This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by
Henan Yiming Technology Co., Ltd. based on MSM8916.
Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.
Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_62395CA0D608DD0078DD3D889F6E4E22BA05@qq.com
On MSM8916 the wireless connectivity functionality (WiFi/Bluetooth) is
split into the digital part inside the SoC and the analog RF part inside
a supplementary WCN36xx chip. For MSM8916, three different options
exist:
- WCN3620 (WLAN 802.11 b/g/n 2.4 GHz + Bluetooth)
- WCN3660B (WLAN 802.11 a/b/g/n 2.4/5 GHz + Bluetooth)
- WCN3680B (WLAN 802.11ac 2.4/5 GHz + Bluetooth)
Choosing one of these is up to the board vendor. This means that the
compatible belongs into the board-specific DT part so people porting
new boards pay attention to set the correct compatible.
Right now msm8916.dtsi sets "qcom,wcn3620" as default compatible,
which does not work at all for boards that have WCN3660B or WCN3680B.
Remove the default compatible from msm8196.dtsi and move it to the board
DT as follows:
- Boards with only &pronto { status = "okay"; } used the default
"qcom,wcn3620" so far. They now set this explicitly for &wcnss_iris.
- Boards with &pronto { ... iris { compatible = "qcom,wcn3660b"; }};
already had an override that just moves to &wcnss_iris now.
- For msm8916-samsung-a2015-common.dtsi the WCN compatible differs for
boards making use of it (a3u: wcn3620, a5u: wcn3660b, e2015: wcn3620)
so the definitions move to the board-specific DT part.
Since this requires touching all the board DTs, use this as a chance to
name the WCNSS-related labels consistently, so everything is grouped
properly when sorted alphabetically.
No functional change, just clean-up for more clarity & easier porting.
Aside from ordering the generated DTBs are identical.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309091452.1011776-1-stephan.gerhold@kernkonzept.com
Tianma FHD panel is supposed to be used with fallback compatible:
sdm845-xiaomi-beryllium-tianma.dtb: panel@0: compatible: ['tianma,fhd-video'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-11-krzysztof.kozlowski@linaro.org
Panel does not have children with unit-addresses thus address/size-cells
are not valid:
sdm845-xiaomi-beryllium-tianma.dtb: panel@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-10-krzysztof.kozlowski@linaro.org
Panel does not have children with unit-addresses thus address/size-cells
are not valid:
panel@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-9-krzysztof.kozlowski@linaro.org
innolux,n116bca-ea1 is not exactly compatible witg innolux,n116bge, as
they have their own driver data. Bindings do not allow fallback:
sc7180-trogdor-lazor-limozeen-nots-r4.dtb: panel: compatible: ['innolux,n116bca-ea1', 'innolux,n116bge'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-8-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-7-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-6-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-5-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
sc7180-idp.dtb: panel@0: 'port' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-4-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-3-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-2-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-1-krzysztof.kozlowski@linaro.org
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6b ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
The soc node is supposed to have only device nodes with MMIO addresses,
so move the DSI OPP into the DSI controller node to fix:
sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-5-krzysztof.kozlowski@linaro.org
'clocks' node is not a bus, but just a placeholder for clocks:
msm8996-xiaomi-gemini.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
From schema: dtschema/schemas/simple-bus.yaml
msm8996-xiaomi-gemini.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-4-krzysztof.kozlowski@linaro.org
'clocks' node is not a bus, but just a placeholder for clocks:
msm8992-msft-lumia-octagon-talkman.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
From schema: dtschema/schemas/simple-bus.yaml
msm8992-msft-lumia-octagon-talkman.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-3-krzysztof.kozlowski@linaro.org
'clocks' node is not a bus, but just a placeholder for clocks:
apq8096-db820c.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
From schema: dtschema/schemas/simple-bus.yaml
apq8096-db820c.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-2-krzysztof.kozlowski@linaro.org
Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.
Fixes: 1ed34da63a ("arm64: dts: qcom: Add board support for HK10")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-2-dmitry.baryshkov@linaro.org
Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.
Fixes: e8a7fdc505 ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@linaro.org
Enable both touchpad nodes in the devictree and let the HID driver
determine which one is actually populated (by attempting to read from
each i2c address).
Ideally this would not be needed and the boot firmware should instead
enable only the node for the populated touchpad, but this is unlikely to
ever be realised for the X13s.
Note that the pin configuration must currently be moved to the parent
i2c-bus node even though only one of these nodes will ever be
successfully probed on a specific device (e.g. to allow them to be
probed in parallel).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324094744.20448-1-johan+linaro@kernel.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-5-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-2-krzysztof.kozlowski@linaro.org
The SPMI PMIC register region width is fixed and should not be encoded
in the devicetree.
Fixes: d6dbbda37a ("arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320135710.1989-3-johan+linaro@kernel.org
The QMP PHY is a USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-4-d78313cbc41d@linaro.org
The first QMP PHY is an USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-2-d78313cbc41d@linaro.org
