To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-5-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-4-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-3-hsinyi@chromium.org
Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().
The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.
Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org
Dropping drm_blend.h from drm_crtc.h broke the
xlnx driver. Make it build again by including
drm_blend.h from the driver directly.
My .config was missing some required dependencies so
I never build tested it :/
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 90bb087f66 ("drm: Drop drm_blend.h from drm_crtc.h")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621075648.7717-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9143:27: warning: variable 'abo' set but not used [-Wunused-but-set-variable]
Fixes: 047de3f17a ("drm/amdgpu: switch DM to atomic fence helpers v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616203538.649041-1-alexander.deucher@amd.com
drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.
Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER
might have several causes, these messages help finding the origin.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-1-alexander.stein@ew.tq-group.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.
Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-3-jirivanek1@gmail.com
Function for reading from i2c device register displays error message even
if reading ends correctly. Add return to avoid falling through into
the fail label.
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615222221.1501-2-jirivanek1@gmail.com
Add myself as the maintainer of DRM bridge drivers for i.MX SoCs.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-15-victor.liu@nxp.com
This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-14-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards. The two channels can be used
simultaneously, either in dual mode or split mode. In dual mode, the
two channels output identical data. In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels. This patch supports the
LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards. The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display. The channel indexes have to be
different. Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-11-victor.liu@nxp.com
This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs. Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qxp pixel link to display
pixel interface(PXL2DPI). The PXL2DPI interfaces the pixel link 36-bit
data output and the DSI controller’s MIPI-DPI 24-bit data input, and
inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap
the pixel color codings between those modules. The PXL2DPI is purely
combinatorial.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com
This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-8-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link.
The pixel link forms a standard asynchronous linkage between
pixel sources(display controller or camera module) and pixel
consumers(imaging or displays). It consists of two distinct
functions, a pixel transfer function and a control interface.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO,
RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp
pixel combiner. The RGB pixels with padding low per component are
transmitted on a 30-bit input bus(10-bit per component) from a display
controller or a 36-bit output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-3-victor.liu@nxp.com
This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com
As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI
interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it.
Fixes: fd0310b6fe ("drm/bridge: anx7625: add MIPI DPI input feature")
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-4-xji@analogixsemi.com
Add 'bus-type' and 'data-lanes' define, bus-type 7 for MIPI DPI
input, others for DSI input.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084720.959271-3-xji@analogixsemi.com
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE
from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV
registers are not read subsequently also as required.
Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is
done during connector detection. While at it also fix up the same call
in drm_dp_mst_dump_topology().
Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614094537.885472-1-imre.deak@intel.com
Now that the PHY ops are separated, sort them topologically, with the
common sun8i_hdmi_phy_set_polarity helper at the top. No function
contents are changed in this commit.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-7-samuel@sholland.org
Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.
For clarity, this commit keeps the existing function order.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-6-samuel@sholland.org
The D1 SoC comes with a new custom HDMI PHY, which does not share any
registers with the existing custom PHY. So it needs a new set of ops.
Instead of providing a flag in the variant structure, provide the ops
themselves.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-5-samuel@sholland.org
Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-4-samuel@sholland.org
The struct resource is not used for anything else, so we can simplify
the code a bit by using the helper function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-3-samuel@sholland.org
Now that the HDMI PHY is using a platform driver, we can use the usual
helper function for getting the variant structure.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-2-samuel@sholland.org
amdgpu_dm_crtc_late_register() is only used when CONFIG_DEBUG_FS
is enabled so make it dependent on that.
Fixes: 4cd79f614b ("drm/amd/display: Move connector debugfs to drm")
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lists.freedesktop.org/archives/dri-devel/2022-June/359496.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615210019.28943-1-alexander.deucher@amd.com
The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:
drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com
While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.
In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.
Fixes: 9e82ea0fb1 ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com
This reverts commit fa0e256450. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.
This leads to linking errors, for example on parisc with allyesconfig:
hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'
The goal of commit fa0e256450 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085450.1341880-1-javierm@redhat.com
Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.
Fixes: 185443efa2 ("drm/msm: Convert to drm_of_get_data_lanes_count")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
