Patch adds AVX2/x86-64 implementation of Twofish cipher, requiring 16 parallel
blocks for input (256 bytes). Table look-ups are performed using vpgatherdd
instruction directly from vector registers and thus should be faster than
earlier implementations. Implementation also uses 256-bit wide YMM registers,
which should give additional speed up compared to the AVX implementation.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Patch adds AVX2/x86-64 implementation of Blowfish cipher, requiring 32 parallel
blocks for input (256 bytes). Table look-ups are performed using vpgatherdd
instruction directly from vector registers and thus should be faster than
earlier implementations.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig setting for glue helper module is CRYPTO_GLUE_HELPER_X86, but
recent change for aesni_intel used CRYPTO_GLUE_HELPER instead. Patch corrects
this issue.
Cc: kbuild-all@01.org
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add more optimized XTS code for aesni_intel in 64-bit mode, for smaller stack
usage and boost for speed.
tcrypt results, with Intel i5-2450M:
256-bit key
enc dec
16B 0.98x 0.99x
64B 0.64x 0.63x
256B 1.29x 1.32x
1024B 1.54x 1.58x
8192B 1.57x 1.60x
512-bit key
enc dec
16B 0.98x 0.99x
64B 0.60x 0.59x
256B 1.24x 1.25x
1024B 1.39x 1.42x
8192B 1.38x 1.42x
I chose not to optimize smaller than block size of 256 bytes, since XTS is
practically always used with data blocks of size 512 bytes. This is why
performance is reduced in tcrypt for 64 byte long blocks.
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add more optimized XTS code for camellia-aesni-avx, for smaller stack usage
and small boost for speed.
tcrypt results, with Intel i5-2450M:
enc dec
16B 1.10x 1.01x
64B 0.82x 0.77x
256B 1.14x 1.10x
1024B 1.17x 1.16x
8192B 1.10x 1.11x
Since XTS is practically always used with data blocks of size 512 bytes or
more, I chose to not make use of camellia-2way for block sized smaller than
256 bytes. This causes slower result in tcrypt for 64 bytes.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change cast6-avx to use the new XTS code, for smaller stack usage and small
boost to performance.
tcrypt results, with Intel i5-2450M:
enc dec
16B 1.01x 1.01x
64B 1.01x 1.00x
256B 1.09x 1.02x
1024B 1.08x 1.06x
8192B 1.08x 1.07x
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change twofish-avx to use the new XTS code, for smaller stack usage and small
boost to performance.
tcrypt results, with Intel i5-2450M:
enc dec
16B 1.03x 1.02x
64B 0.91x 0.91x
256B 1.10x 1.09x
1024B 1.12x 1.11x
8192B 1.12x 1.11x
Since XTS is practically always used with data blocks of size 512 bytes or
more, I chose to not make use of twofish-3way for block sized smaller than
128 bytes. This causes slower result in tcrypt for 64 bytes.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AVX optimized XTS-mode helper functions/macros and converts
serpent-avx to use the new facilities. Benefits are slightly improved speed
and reduced stack usage as use of temporary IV-array is avoided.
tcrypt results, with Intel i5-2450M:
enc dec
16B 1.00x 1.00x
64B 1.00x 1.00x
256B 1.04x 1.06x
1024B 1.09x 1.09x
8192B 1.10x 1.09x
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that CryptoAPI has support for CMAC, we can add support for AES-CMAC-96
(rfc4494).
Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI.
This work is based on Tom St Denis' earlier patch,
http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2
Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without these, kernel log shows:
[ 5.984881] alg: No test for cipher_null (cipher_null-generic)
[ 5.985096] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 5.985170] alg: No test for compress_null (compress_null-generic)
[ 5.985297] alg: No test for digest_null (digest_null-generic)
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the gcm cipher used by rfc4543 does not complete request immediately,
the authentication tag is not copied to destination buffer. Patch adds
correct async logic for this case.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The GMAC code assumes that dst==src, which causes problems when trying to add
rfc4543(gcm(aes)) test vectors.
So fix this code to work when source and destination buffer are different.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows timeriomem_rng to be used via devicetree.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
timeriomem_rng only supports a single device instance. This patch
enables multiple timeriomem_rng devices to coexist as well as adds
some additional error checking.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y.
Older versions of bintuils do not support the pclmulqdq instruction. The
PCLMULQDQ gas macro is used instead.
Signed-off-by: Sandy Wu <sandyw@twitter.com>
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds a driver for random number generator present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
checkstack reports report_deco_status(), report_ccb_status() as
particularly excessive stack users. Move their lookup tables
off the stack and put them in .rodata.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit 2af8f4a "crypto: caam - coccicheck fixes" added error
return values yet neglected to change the type from unsigned.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA512 x86_64 assembly routines.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA512 x86_64 assembly routine optimized with SSE, AVX and
AVX2's RORX instructions. Speedup of 70% or more has been
measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA512 x86_64 assembly routine optimized with SSE and AVX instructions.
Speedup of 60% or more has been measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA512 x86_64 assembly routine optimized with SSSE3 instructions.
Speedup of 40% or more has been measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Other SHA512 routines may need to use the generic routine when
FPU is not available.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA256 x86_64 assembly routine optimized with SSE, AVX and
AVX2's RORX instructions. Speedup of 70% or more has been
measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA256 x86_64 assembly routine optimized with SSE and AVX instructions.
Speedup of 60% or more has been measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provides SHA256 x86_64 assembly routine optimized with SSSE3 instructions.
Speedup of 40% or more has been measured over the generic implementation.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Other SHA256 routine may need to use the generic routine when
FPU is not available.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These modules require AVX support in assembler, so add new check to Makefile
for this.
Other option would be to use CONFIG_AS_AVX inside source files, but that would
result dummy/empty/no-fuctionality modules being created.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using devm_ioremap_resource() can make the code cleaner and simpler.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change is required for post SEC-5.0 devices which have RNG4.
Setting RDB in security configuration register allows CAAM to use the
"Random Data Buffer" to be filled by a single request. The Random Data
Buffer is large enough for ten packets to get their IVs from a single
request. If the Random Data Buffer is not enabled, then each IV causes a
separate request, and RNG4 hardware cannot keep up resulting in lower
IPSEC throughput if random IVs are used.
Signed-off-by: Vakul Garg <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix
the following build warning when CONFIG_PM_SLEEP is not selected.
drivers/char/hw_random/exynos-rng.c:147:12: warning: 'exynos_rng_runtime_suspend' defined but not used [-Wunused-function]
drivers/char/hw_random/exynos-rng.c:157:12: warning: 'exynos_rng_runtime_resume' defined but not used [-Wunused-function]
Add CONFIG_PM_RUNTIME to suspend/resume functions to fix the build
error. It is because UNIVERSAL_DEV_PM_OPS macro is related to both
CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME.
drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_suspend' undeclared here (not in a function)
drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_resume' undeclared here (not in a function)
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SAHARA2 HW module is included in the i.MX27 SoC from
Freescale. It is capable of performing cipher algorithms
such as AES, 3DES..., hashing and RNG too.
This driver provides support for AES-CBC and AES-ECB
by now.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Seeing from the comment, there should be three reasons for removing request_mem_region.
Change the comment "two" to "three".
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig entry for CAAM's hash algorithm implementations has always
selected CRYPTO_AHASH. But there's no corresponding Kconfig symbol.
It seems it was intended to select CRYPTO_HASH, like other crypto
drivers do. That would apparently (indirectly) select CRYPTO_HASH2,
which would enable the ahash functionality this driver uses.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
module_platform_driver() makes the code simpler by eliminating boilerplate
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
module_platform_driver() makes the code simpler by eliminating boilerplate
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After DMA is complete, the omap_aes_finish_req function is called as
a part of the done_task tasklet. During this its atomic and any calls
to pm functions should not assume they wont sleep.
The patch replaces a call to pm_runtime_put_sync (which can sleep) with
pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during
AES operation.
Tested on an AM33xx SoC device (beaglebone board).
To reproduce the problem, I used the tcrypt kernel module as:
modprobe tcrypt sec=2 mode=500
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After DMA is complete, the omap_sham_finish_req function is called as
a part of the done_task tasklet. During this its atomic and any calls
to pm functions should not assume they wont sleep.
The patch replaces a call to pm_runtime_put_sync (which can sleep) with
pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during
SHA operation.
Tested on an AM33xx SoC device (beaglebone board).
To reproduce the problem, used the tcrypt kernel module as:
modprobe tcrypt sec=2 mode=403
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we define dev_dbg(), then there is a possible NULL pointer
dereference.
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to modify the netlink dispatch table at runtime and
making it const even makes the resulting object file slightly smaller.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
