Merge series from Francesco Dolcini <francesco@dolcini.it>:
Add support for BTL (Bridge Tied Load) configuration to NAU8822 audio codec,
since this requires adding a new property to the binding convert it from
txt to yaml first.
Merge series from Chancel Liu <chancel.liu@nxp.com>:
This patchset supports XCVR on i.MX93 platform.
changes in v2:
- remove unnecessary code which causes kernel test robot reporting error
Chancel Liu (3):
ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX93 platform
ASoC: fsl_xcvr: Add support for i.MX93 platform
ASoC: fsl_xcvr: Add constraints of period size while using eDMA
.../devicetree/bindings/sound/fsl,xcvr.yaml | 1 +
sound/soc/fsl/fsl_xcvr.c | 155 ++++++++++++------
sound/soc/fsl/fsl_xcvr.h | 7 +
3 files changed, 115 insertions(+), 48 deletions(-)
--
2.25.1
commit dcc2c012c7 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.
A similar simplification seems valid for nau8315, so remove the
dependency as well. This will avoid the following warning
WARNING: unmet direct dependencies detected for SND_SOC_NAU8315
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
GPIOLIB [=n]
Selected by [y]:
- SND_SOC_INTEL_SOF_NAU8825_MACH [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
(SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) &&
I2C [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=n] ||
COMPILE_TEST [=y])
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230108114351.539786-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function primary_codec_init() should return 0 if dmic_sel is null.
Here is the warning message reported by 0-DAY CI Kernel Test Service.
smatch warnings:
primary_codec_init() warn: missing error code? 'ret'
...
2022-11-02 141 if (!priv->dmic_sel) {
2022-11-02 142 dev_info(card->dev, "dmic_sel is null\n");
2022-11-02 @143 return ret;
return -EIVNAL;? return 0;?
2022-11-02 144 }
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230107175933.12973-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns:
sound/soc/amd/ps/pci-ps.c:218:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/amd/ps/pci-ps.c:239:9: note: uninitialized use occurs here
return ret;
^~~
sound/soc/amd/ps/pci-ps.c:190:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
1 error generated.
ret is used uninitialized if 'goto de_init' is taken. As this is not an
error nor should the ACP be deinitialized, just directly return 0 in
this case statement, which resolves the warning.
Fixes: 1d325cdaf7 ("ASoC: amd: ps: refactor platform device creation logic")
Link: https://github.com/ClangBuiltLinux/linux/issues/1779
Suggested-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Syed Saba Kareem <syed.sabakareem@amd.com>
Link: https://lore.kernel.org/r/20230105-wsometimes-uninitialized-pci-ps-c-v2-1-c50321676325@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
eDMA on i.MX93 platform requires the period size to be multiple of
maxburst.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104023953.2973362-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string and specific soc data to support XCVR on i.MX93
platform. XCVR IP on i.MX93 is cut to SPDIF only by removing external
PHY.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104023953.2973362-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow configuring the two loudspeaker outputs as a
single Bridge Tied Load output getting higher output power.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230104140412.35575-4-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.
Unfortunately commit 8d89cf6ff2 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.
The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.
There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 8d89cf6ff2 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104025754.3019235-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse warning:
error: symbol 'acp63_fill_platform_dev_info' was not declared. Should
it be static?
Also reduce line lines below 100 characters.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230104145708.25051-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Retrieve acp_lock mutex as platform data and use it for protecting
ACP common registers access in acp pdm driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230104055435.321327-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().
Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().
Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().
Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().
Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().
Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable becomes useless since we moved the snd_soc_jack
structure from a static array to sof_hdmi_pcm structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230103073704.722027-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from tongjian <tongjian@huaqin.corp-partner.google.com>:
Add MAX98360A for RT5682S, MAX98360A works same as rt1019. So, it can
be supported.
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
RT9120 uses PM runtime autosuspend to decrease the frequently on/off
spent time. This exists one case, when pcm is closed and dev PM is
waiting for autosuspend time expired to enter runtime suspend state.
At the mean time, system is going to enter suspend, dev PM runtime
suspend won't be called. It makes the rt9120 suspend consumption
current not as expected.
This patch can fix the rt9120 dev PM issue during runtime autosuspend
and system suspend by binding dev PM runtime and ASoC component PM.
Fixes: 80b949f332 ("ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1672301033-3675-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
The following series adds runtime PM and suspend to RAM features for
mchp-pdmc driver.
Along with it 2 cleanup patches were added:
- patch 1/4: use vendor,device.yaml file format for Microchip AT91 ASoC
bindings
- patch 4/4: use FIELD_PREP() in mchp-spdiftx.c
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will extend the IPC ops optionality to cover it up to the existence
of the top level ipc pointer itself. There is no functionality change.
The reason for the extended optionality is that we have "DSPless"
debug/development support coming up (currently it is in SOF's topic/sof-dev
stable branch) initially supporting Intel's HDA platforms.
As the name suggests, in this mode the DSP is completely ignored by the linux
driver stack (no firmware loaded, only using HDA directly).
The DSPless mode is aimed to help us to verify our Linux stack on new platforms
where the firmware is not yet in the state that we can reliably use it, but the
hardware and programming flows can be tested already.
There is no plan to make DSPless a production target for SOF Linux stack.
While this is preparatory series aimed to unblock the DSPless support, it has
been integrated into sof-dev separately and we have lots of new features
depending on it (went in between this set and the DSPless support).
I still have some minor tasks to complete for the DSPless to make it a bit more
versatile, but I don't want to block other, stable features for upstreaming.
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this patch series removes all platform remove functions that only return
zero below sound/soc. There is no reason to have these, as the only
caller is platform core code doing:
if (drv->remove) {
int ret = drv->remove(dev);
...
}
(in platform_remove()) and so having no remove function is both
equivalent and simpler.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Some devices like DMIC don't expose native controls or need volume limit
due to possible HW damage. Add support for volume controls allowing to
change volume level in DSP. Maximum volume level is imposed by the
topology file which defines given path.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series contails 2 patches to fix device suspend after a firmware
crash and another patch to allow reading the FW state from debugfs.
The maximum name length for a platform_device_id entry is 20 characters
including the trailing NUL byte. The sof_nau8825.c file exceeds that,
which causes an obscure error message:
sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding]
MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>");
^~~~
include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS'
^~~~~~
include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO'
^~~~
include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO'
= __MODULE_INFO_PREFIX __stringify(tag) "=" info
I could not figure out how to make the module handling robust enough
to handle this better, but as a quick fix, using slightly shorter
names that are still unique avoids the build issue.
Fixes: 8d0872f623 ("ASoC: Intel: add sof-nau8825 machine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221221132515.2363276-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-sof_nau8825.ko module fails to link unless the
sof_realtek_common support is also enabled:
ERROR: modpost: "sof_rt1015p_codec_conf" [sound/soc/intel/boards/snd-soc-sof_nau8825.ko] undefined!
ERROR: modpost: "sof_rt1015p_dai_link" [sound/soc/intel/boards/snd-soc-sof_nau8825.ko] undefined!
Fixes: 8d0872f623 ("ASoC: Intel: add sof-nau8825 machine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221221132559.2402341-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two nau8318 speaker amplifiers on
SSP1 and nau8825 on SSP0 for ADL platform.
The nau8315 and nau8318 are both Nuvoton Amp chips. They use the same
Amp driver nau8315.c. The acpi_device_id for nau8315 is "NVTN2010",
for nau8318 is "NVTN2012".
The nau8825 is one of Nuvoton headset codec, and its acpi_device_id is
"10508825".
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221222042624.557869-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Razer Blade 14 (2022) - RZ09-0427 needs the quirk to enable the built in microphone
Signed-off-by: Wim Van Boven <wimvanboven@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221216081828.12382-1-wimvanboven@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support configuration with SoundWire RT1318 amplifiers on link1 and
link2, and RT711 on link0 for headphone/headset. This product does
not support local microphones.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221226010917.2632973-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support configuration with SoundWire RT1316 amplifiers on link0 and
link1, and RT711 on link2 for headphone/headset. This product does
not support local microphones.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221226010917.2632973-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using hard coded index value for platform device index,
retrieve the device index based on platform devices created.
In PDM config case, ACP PCI driver retrieves dev index from
pdm_dev_index variable.
This will avoid overhead when multiple endpoint combinations
support is added later.
platform device index will vary based on audio endpoint
configuration.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor platform device creation implementation.
Based on platform dev count and pdev mask create platform devices.
Use common API to fill platform dev information.
Use pdev count variable in remove callback for unregistering
platform devices.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement API to retrieve acp device config and calculate platform
device count and dev mask for platform device node creation.
Currently for DMIC configuration, mask and dev count are calculated.
Same api will be used to extend support for different ACP device
configurations.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LOUT output can produce either single-ended stereo signals, or mono
differential signal. Some applications are wired to use LOUT in mono
differential mode. Allow to configure it via device property.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20221209105621.39237-1-kernel@undef.tools
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8940 provides the chip ID information via I2C. In this
patch this information is read and if not matching expected
value, the probe function is aborted.
This prevents from using (i.e. inserting) other wm89* modules
which use the same I2C bus address.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-3-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch enables support for internal wm8940's PLL and proper
divider to set proper value for 256x fs clock.
This approach is more flexible and replaces hardcoded clock
values and makes the codec work with the simple-card driver.
Card drivers calling set_pll() and set_clkdiv() directly are
unaffected.
For the reference - code in this commit is based on:
51b2bb3f25
("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The lack of platform data in the contemporary Linux
shall not be the reason to display warnings to the
kernel logs.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-1-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the DAI mono mode support and set the frame width to 32
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Tested-by: David Rau <David.Rau.opensource@dm.renesas.com>
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221214044058.6289-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP SRAM is not used for audio shared buffer between host and DSP so
TOTAL_SIZE_SHARED_SRAM_FROM_TAIL is zero. Remove the definition and
redundant comparison to fix coverity "unsigned compared against 0".
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angeloigoacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221215061046.16934-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error "Conflict in bytes vs. priv size." is too brief. With
the printed sizes it's a lot easier to find the size issue in
for binary control if such happens.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221216115350.28260-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_debug value is set by the user, developer intentionally.
To save time on figuring out what value has been passed to the kernel by
the user, developer, print it out if it is not 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20221216115435.28427-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for suspend to RAM by re-aranging the lines in switch..case
from mchp_pdmc_trigger() and saving/restoring the enabled interrupts. These
are necessary as AT91 devices has a special power saving mode (called
backup and self-refresh) where most of the SoC parts are powered off
and thus we need to reconfigure the PDMC on resume.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221213112851.89212-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement clock power saving taking advantage of runtime PM infrastructure.
This simplifies the code and allow using the same infrastructure for
suspend to RAM functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221213112851.89212-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle creation of peakvol module in FW. When peakvol module is created
it retrieves actual value from kcontrol and sends it to FW as part of
configuration data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add callback to handle loading of kcontrol and linking it to active
widget. In order to link kcontrol to specific modules add additional
field to module data, as well as specify control id in kcontrol data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make introduced peakvol module useful from userspace perspective,
expose ALSA controls allowing DSP volume modification. These provide
even more granular control over volume but are also the only way to
modify volume for devices devoid of codec kcontrols e.g.: DMIC.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peakvol module allows for setting and obtaining DSP volume as well as
modifying shape and duration at which volume actually changes. Add IPC
messages to expose those capabilities.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221212205406.3771071-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221212205406.3771071-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221212205406.3771071-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
If the sdev->fw_trace_is_supported is true then we must have the fw_tracing
ops set, no need to check again.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For the sake of safety use the sof_ipc_get_ops() to fetch the fw_tracing
ops to avoid cases when either sdev->ipc or sdev->ipc->ops might be NULL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code treats the fw_tracing as optional feature but the documentation
was not reflecting this.
Correct it by explicitly stating that the fw_tracing is optional.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[pm/tplg] == NULL (treated optional for pm currently)
sdev->ipc->ops->[pm/tplg]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[tplg] == NULL
sdev->ipc->ops->[tplg]->ops == NULL (treated optional currently)
At the same time standardize the naming of the ops pointer to tplg_ops
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[ops_group] == NULL
sdev->ipc->ops->[pcmops_group]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[tplg] == NULL
sdev->ipc->ops->[tplg]->control == NULL
sdev->ipc->ops->[tplg]->control->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[pcm] == NULL
sdev->ipc->ops->[pcm]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to a case when the DSP is not used.
In this case the IPC communication itself has no meaning and we might
not even have sdev->ipc allocated at all.
The sof_ipc_get_ops() macro can be used to get a named IPC ops struct or
return NULL if the sdev->ipc is not allocated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core treats all function pointer in sof_ipc_tplg_ops as optional.
Update the documentation to reflect this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Other topology ops have been treated as optional, including the route_free.
Handle the route_setup in a conforming way as optional callback.
Note: we do not have checks for the callbacks itself which makes them all
optional in practice.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent allocator,
and then add a check to make sure no one passes the flag ever again.
-----BEGIN PGP SIGNATURE-----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=q0m6
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
A few more updates for 6.2 since the last PR: most of changes are
about ASoC device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks
-----BEGIN PGP SIGNATURE-----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=2Uko
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few more updates for 6.2: most of changes are about ASoC
device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks"
* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
ASoC: lochnagar: Fix unused lochnagar_of_match warning
ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
ASoC: SOF: mediatek: initialize panic_info to zero
ASoC: rt5670: Remove unbalanced pm_runtime_put()
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: mediatek: mt8195: add sof be ops to check audio active
ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
ALSA: hda/hdmi: fix i915 silent stream programming flow
ALSA: hda: Error out if invalid stream is being setup
ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
ASoC: codecs: wcd-clsh: Remove the unused function
...
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
-----BEGIN PGP SIGNATURE-----
iQEyBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOhn2kACgkQJNaLcl1U
h9Dfdgf47os8jUAaEuV3/pFl7OOh+L2jR2P5yCK60VHu0CfuHo3lynwpYvS/8wKN
XqYz0eeuYOWpFeZ12wZBY/Dnk2dwkXiqpv7e0ID0szAH9TezSlQ3MRno9hwWGloU
w3ntU5VeIYTKl91E2y5X9GMoDsfnfh751MsjXOcP40npjGEJpOtAO0z1sIXANSKz
ftceXGapvTokSp7mbk68BM5ivom4TM3eDSlQiOeMj2OeOhXRylx5tHeQV3FzVeB+
4K7bECzveDn/hTYBX2Lopn2stR1RF5S9HDynjo83YDKXOKUp8bJfEHK7R/3y3u56
eIwKgMmxb2eK2IwgjU/7sKP87ARz
=OaSY
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.2
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.
Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow system health detection mechanisms to check the FW state, this
will allow them to check if the FW is in its "crashed" state going
forward to help automatically diagnose driver state.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DSP is suspended while the firmware is in the crashed state, we
skip tearing down the pipelines. This means that the widget reference
counts will not get to reset to 0 before suspend. This will lead to
errors with resuming audio after system resume. To fix this, invoke the
tear_down_all_pipelines op before skipping to DSP suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DSP crashes before the system suspends, the setting of target state
will be skipped because the firmware state will no longer be
SOF_FW_BOOT_COMPLETE. This leads to the incorrect assumption that the
DSP should suspend to D0I3 instead of suspending to D3. To fix this,
set the target_state before we skip to DSP suspend even when the DSP has
crashed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While not quite as bogus as for the dma-coherent allocations that were
fixed earlier, GFP_COMP for these allocations has no benefits for
the dma-direct case, and can't be supported at all by dma dma-iommu
backend which splits up allocations into smaller orders. Due to an
oversight in ffcb754584 that flag stopped being cleared for all
dma allocations, but only got rejected for coherent ones.
Start fixing this by not requesting __GFP_COMP in the sound code, which
is the only place that did this.
Fixes: ffcb754584 ("dma-mapping: reject __GFP_COMP in dma_alloc_attrs")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
- intel: reorganization of hw_ops callbacks, splitting files etc
- qcom: support for v1.7.0 qcom controllers
-----BEGIN PGP SIGNATURE-----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=3uDi
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This include bunch of Intel driver code reorganization and support for
qcom v1.7.0 controller:
- intel: reorganization of hw_ops callbacks, splitting files etc
- qcom: support for v1.7.0 qcom controllers"
* tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: split auxdevice to different file
soundwire: intel: add in-band wake callbacks in hw_ops
soundwire: intel: add link power management callbacks in hw_ops
soundwire: intel: add bus management callbacks in hw_ops
soundwire: intel: add register_dai callback in hw_ops
soundwire: intel: add debugfs callbacks in hw_ops
soundwire: intel: start using hw_ops
dt-bindings: soundwire: Convert text bindings to DT Schema
soundwire: cadence: use dai_runtime_array instead of dma_data
soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime
soundwire: qcom: add support for v1.7 Soundwire Controller
dt-bindings: soundwire: qcom: add v1.7.0 support
soundwire: qcom: make reset optional for v1.6 controller
soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID
soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
lochnagar_of_match is used unconditionally, so COMPILE_TEST builds
without OF warn:
sound/soc/codecs/lochnagar-sc.c:247:34: error: ‘lochnagar_of_match’ defined but not used [-Werror=unused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221215134337.77944-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The bytcr_rt5640.c file already supports the HP Stream 7.
The HP Stream 8 is almost identical in terms of the hardware
with the exception of it having stereo speakers, a SIM
card slot and the obvious size difference.
Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221214120830.1572474-1-moisesmcardona@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This looks like a relatively calm development cycle; there have been
only few changes in ALSA and ASoC core sides while we get lots of
device-specific fixes and updates as usual. Most of commits are about
ASoC, including Intel SOF/AVS and many device tree updates.
Below are some highlights:
Core:
- Improvement in memalloc helper for fallback allocations
- More cleanups of ASoC DAPM code
ASoC:
- Factoring out of mapping hw_params onto SoundWire configuration
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740
- Lots of device tree conversions and fixups
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
ALSA:
- Addition of PCM kselftest; still minimalistic but can be extended
in future
- Fixes for corner-case XRUNs with USB-audio implicit feedback mode
- Usual device-specific quirk updates for USB- and HD-audio
- FireWire DICE updates
Also, this PR also contains a few cross-tree updates:
- Some OMAP board file updates for removal of relevant OMAP platforms
- A new I2C API update for I2C probe API adaption
- A DRM update for the further hdmi-codec updates
-----BEGIN PGP SIGNATURE-----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=QV3a
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This looks like a relatively calm development cycle; there have been
only few changes in ALSA and ASoC core sides while we get lots of
device-specific fixes and updates as usual. Most of commits are about
ASoC, including Intel SOF/AVS and many device tree updates.
Below are some highlights:
Core:
- Improvement in memalloc helper for fallback allocations
- More cleanups of ASoC DAPM code
ASoC:
- Factoring out of mapping hw_params onto SoundWire configuration
- The ever ongoing overhauls of the Intel DSP code continue,
including support for loading libraries and probes with IPC4 on
SOF.
- Support for more sample formats on JZ4740
- Lots of device tree conversions and fixups
- Support for Allwinner D1, a range of AMD and Intel systems,
Mediatek systems with multiple DMICs, Nuvoton NAU8318, NXP
fsl_rpmsg and i.MX93, Qualcomm AudioReach Enable, MFC and SAL,
RealTek RT1318 and Rockchip RK3588
ALSA:
- Addition of PCM kselftest; still minimalistic but can be extended
in future
- Fixes for corner-case XRUNs with USB-audio implicit feedback mode
- Usual device-specific quirk updates for USB- and HD-audio
- FireWire DICE updates
This also contains a few cross-tree updates:
- Some OMAP board file updates for removal of relevant OMAP platforms
- A new I2C API update for I2C probe API adaption
- A DRM update for the further hdmi-codec updates"
* tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (417 commits)
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
ALSA: patch_realtek: Fix Dell Inspiron Plus 16
ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.
ASoC: dt-bindings: Correct Alexandre Belloni email
ASoC: dt-bindings: maxim,max98504: Convert to DT schema
ASoC: dt-bindings: maxim,max98357a: Convert to DT schema
ASoC: dt-bindings: Reference common DAI properties
ASoC: dt-bindings: Extend name-prefix.yaml into common DAI properties
ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
ASoC: uniphier: aio-core: Make some read-only arrays static const
ASoC: wcd938x: Make read-only array minCode_param static const
ASoC: qcom: lpass-sc7280: Add maybe_unused tag for system PM ops
ASoC : SOF: amd: Add support for IPC and DSP dumps
ASoC: SOF: amd: Use poll function instead to read ACP_SHA_DSP_FW_QUALIFIER
ALSA: usb-audio: Workaround for XRUN at prepare
ALSA: pcm: Handle XRUN at trigger START
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
drm: tda99x: Don't advertise non-existent capture support
ASoC: hdmi-codec: Allow playback and capture to be disabled
kselftest/alsa: Add more coverage of sample rates and channel counts
...
Coverity spotted that panic_info is not initialized to zero in
mtk_adsp_dump. Using uninitialized value panic_info.linenum when
calling snd_sof_get_status. Fix this coverity by initializing
panic_info struct as zero.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221213115617.25086-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes: 64e89e5f55 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
This patchset is an alternative solution to problems
reported by Ricardo Ribalda <ribalda@chromium.org> and
Zhen Ni <nizhen@uniontech.com>, as discussed in
- "[PATCH] ALSA: core: Fix deadlock when shutdown a frozen userspace"
https://mailman.alsa-project.org/pipermail/alsa-devel/2022-November/209248.html
- "[PATCH] ASoc: SOF: Fix sof-audio-pci-intel-tgl shutdown timeout during hibernation"
https://mailman.alsa-project.org/pipermail/alsa-devel/2022-December/209685.html
It was raised by Oliver Neukum <oneukum@suse.com> that kernel should
not let user-space stall the shutdown process in any scenario and the
unregister call in current SOF shutdown code is not right.
This series reverts the ASoC SOF patch to unregister clients and
the machine drivers at shutdown. To avoid bringing back old bugs,
the series includes a patch to fix S5 entry on certain Intel
platforms.
The unique ID is determined by the ADR pin level of rt1318.
ODM changed design, update codec addr to match new design.
Fixes: 0050e3d3d4 ("ASoC: Intel: soc-acpi: add SKU 0C11 SoundWire configuration")
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221212085527.1886168-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rk_spdif_runtime_resume() may have called clk_prepare_enable() before return
from failed branches, add missing clk_disable_unprepare() in this case.
Fixes: f874b80e15 ("ASoC: rockchip: Add rockchip SPDIF transceiver driver")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221208063900.4180790-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix this by dropping wm8994->accdet_lock while calling
cancel_delayed_work_sync(&wm8994->mic_work) in wm1811_jackdet_irq().
Fixes: c0cc3f1665 ("ASoC: wm8994: Allow a delay between jack insertion and microphone detect")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221209091657.1183-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In MT8195 SOF design, both DSP and audio driver would access audio
registers. Before DSP accesses audio registers, audio power and clock
should be enabled. DSP will hang up if DSP access audio register but
audio power and clock are disabled. Therefore, we add audio pm runtime
active checking before accessing audio registers in SOF BE's callback
hw_params function to avoid this situation.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221209031053.8444-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.
If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.
Co-developed-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the new style KAE keep-alive implementation is used on compatible
Intel hardware, the clocks are maintained when codec is in D3. The
generic code in hda_cleanup_all_streams() can however interfere with
generation of audio samples in this mode, by setting the stream and
channel ids to zero.
To get full benefit of the keepalive, set the new
no_stream_clean_at_suspend quirk bit on affected Intel hardware. When
this bit is set, stream cleanup is skipped in hda_call_codec_suspend().
Special handling is needed for the case when system goes to suspend. The
stream id programming can be lost in this case. This will also cause
codec->cvt_setups to be out of sync. Handle this by implementing custom
suspend/resume handlers. If keep-alive is active for any converter, set
the quirk flags no_stream_clean_at_suspend and forced_resume. Upon
resume, keepalive programming is restored if needed.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the stream-id is zero, the keep-alive (KAE) will only ensure clock is
generated, but no audio samples are sent over display link. This happens
before first real audio stream is played out to a newly connected
receiver.
Reuse the code in silent_stream_enable() to set up stream parameters
to sane defaults values, also when using the newer keep-alive flow.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The i915 display codec may not successfully transition to
normal audio streaming mode, if the stream id is programmed
while codec is actively transmitting data. This can happen
when silent stream is enabled in KAE mode.
Fix the issue by implementing a i915 specific programming
flow, where the silent streaming is temporarily stopped,
a small delay is applied to ensure display codec becomes
idle, and then proceed with reprogramming the stream ID.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7353
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scenario when snd_hdac_stream_setup_periods() receives an instance of
struct hdac_stream with neither ->substream nor ->cstream initialized is
invalid.
Simultaneously addresses "uninitialized symbol 'dmab'" error reported by
Smatch.
Fixes: 3e9582267e ("ALSA: hda: Interrupt servicing and BDL setup for compress streams")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221208142635.1514944-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few more updates for v6.2 which can hopefully go into a later pull
request, the bulk of these are fixes, minor cleanups or new board quirks
- the one big bit that isn't is support for getting diagnostic data out
of the Intel AVS firmwares.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOR9PIACgkQJNaLcl1U
h9C3wAf9FkTPVSSljH3u0mHDWrFjz4h+MRW8bzNGFmTSU9IEQwk2vjfXcSod1D8o
aDUhMVd1pGujc/1u6jk7virAG6IrT7mt0N6VHh4Qckxlj10EnAn/lVW0A/BWbtj3
j2j1AS1XxtYEdG0DQX7A4TAcdDysI1q66BEX3+kOlozAs8bn8Q1ZiEc2p2uaHKkY
pPNdvYQnZyxng4sQb2l3MmHtRAt3gwG6QC3VwAsGX1PNwlHqQNd6U2Tg9MQKP9q0
rwcUeutXcJihE576y+H7jsBpkopsIpSAl8Wb/LQzgDBfScY0YITPw/wUGNIUhNk7
LMNuJBQAQ66EyNJH58K2DrmXsSXOjA==
=lNJM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
A few more updates for v6.2 which can hopefully go into a later pull
request, the bulk of these are fixes, minor cleanups or new board quirks
- the one big bit that isn't is support for getting diagnostic data out
of the Intel AVS firmwares.
DAIs parameters should be cleared if there's no active stream. Before,
we implemented it in soc_pcm_hw_free() by detecting stream_active. If
the running stream is the last active stream, we're going to clear
parameters.
However it will cause DAIs parameters never be cleared if there're
more than one stream. For example, we have stream1 and stream2 about
to stop. stream2 executes soc_pcm_hw_free() before stream1 executes
soc_pcm_close(). At the moment, stream2 should clear DAIs parameters.
Since stream_active is not yet updated by stream1 in soc_pcm_close(),
stream2 will not clear DAIs parameters. In result both stream1 and
stream2 don't clear the parameters.
This patch moves DAIs parameters cleanup after stream_active is
updated.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20221128060950.3540845-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function wcd_clsh_set_buck_mode() is defined in the wcd-clsh-v2.c
file, but not called elsewhere, so remove this unused function.
sound/soc/codecs/wcd-clsh-v2.c:133:20: warning: unused function 'wcd_clsh_enable_status'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3348
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221205073507.36071-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One new JasperLake configuration, core refactoring between RT1316 and
RT1318 and a minor uninitialized variable corner case.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Even though skylake-driver is going to be replaced by the avs-driver,
the goal is to keep it functional on all the configurations it supports
until its EOL. When comparing chrome trees against upstream
skylake-driver, couple fixes pop up that are not part of upstream
repository. These fixes are backed up by real bugs (issue trackers),
address real problems. There is no reason for them to stay in the
internal tree.
Patches 1-4 combined together address issue where the driver updates the
presumably static audio format descriptions coming from the topology
files through its "fixup" functions. As long as given audio format is
used by a single path, nothing collides and any updates are harmless.
However, when multiple paths e.g.: DMIC and HDMI1 utilize the same audio
format descriptor, any updates caused by the opening of the first path,
may cause the second to fail.
The 5th change from the set fixes driver hang sporadically occurring
during shutdown procedure. Once HDAudio links are powered down along
with the AudioDSP, the hang stops reproducing.
The last change helps survive in environments with limited/fragmented
memory. While the BDL is small already, other buffers can be allocated
using scatter-gather. This basically aligns the code with what the
avs-driver does.
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe().
Fixes: 11c0269017 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234188-23596-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212051943476482106@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The clk_disable_unprepare() should be called in the error handling of
rockchip_pdm_runtime_resume().
Fixes: fc05a5b222 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221205032802.2422983-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The of_get_next_child() returns a node with refcount incremented, and
decrements the refcount of prev. So in the error path of the while loop,
of_node_put() needs be called for cpu_ep.
Fixes: fce9b90c1a ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8173_rt5650_rt5514_dev_probe().
Fixes: 0d1d7a6642 ("ASoC: mediatek: Refine mt8173 driver and change config option")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234664-24246-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'ret' will not be initialized if dai_fmt is not DSP_A or DSP_B.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221206212507.359993-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt1308.c/sof_sdw_rt1316.c/sof_sdw_rt1318.c handle amp
in basically the same way, optimized and merged into one file.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221206212507.359993-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Resign from ->alloc_dma_buf() and use snd_dma_alloc_pages() directly.
For data i.e.: base firmware binary transfer, make use of SG allocation
to better adapt to memory-limited environment. For BDL descriptor, given
its small size this is not required.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AudioDSP cores and HDAudio links need to be turned off on shutdown to
ensure no communication or data transfer occurs during the procedure.
Fixes: c5a76a2469 ("ASoC: Intel: Skylake: Add shutdown callback")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a single location for pipe config selection where all fields
that have to be updated whenever ->pipe_config_idx changes can be
updated accordingly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Field ->pipe_config_idx duplicates the job of ->cur_config_idx so
remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than forcing userspace to select proper format with enumerable
kcontrols, select it ourselves based on provided hw_params.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without updating the index before BE copier config is filled with
hardware parameters, outdated parameters are used instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
I got a null-ptr-defer error report when I do the following tests
on the qemu platform:
make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m
Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF
Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:
syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
Call Trace:
<IRQ>
snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
parport_irq_handler+0x37/0x50 [parport]
__handle_irq_event_percpu+0x39/0x190
handle_irq_event_percpu+0xa/0x30
handle_irq_event+0x2f/0x50
handle_edge_irq+0x99/0x1b0
__common_interrupt+0x5d/0x100
common_interrupt+0xa0/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
parport_claim+0xbd/0x230 [parport]
snd_mts64_probe+0x14a/0x465 [snd_mts64]
platform_probe+0x3f/0xa0
really_probe+0x129/0x2c0
__driver_probe_device+0x6d/0xc0
driver_probe_device+0x1a/0xa0
__device_attach_driver+0x7a/0xb0
bus_for_each_drv+0x62/0xb0
__device_attach+0xe4/0x180
bus_probe_device+0x82/0xa0
device_add+0x550/0x920
platform_device_add+0x106/0x220
snd_mts64_attach+0x2e/0x80 [snd_mts64]
port_check+0x14/0x20 [parport]
bus_for_each_dev+0x6e/0xc0
__parport_register_driver+0x7c/0xb0 [parport]
snd_mts64_module_init+0x31/0x1000 [snd_mts64]
do_one_initcall+0x3c/0x1f0
do_init_module+0x46/0x1c6
load_module+0x1d8d/0x1e10
__do_sys_finit_module+0xa2/0xf0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..
The mts wa not initialized during interrupt, we add check for
mts to fix this bug.
Fixes: 68ab801e32 ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221206061004.1222966-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset focuses on debug functionality for the avs-driver.
Two major blocks are covered here: data probing and AudioDSP firmware
logging. Both are configured and controlled through debugfs.
Data probing is a AudioDSP debug functionality which allows for
gathering the actual data that is being routed to or from a module.
Helps in debugging its processing capabilities - navigate to a specific
module which may have caused a glitch within a pipeline (set of modules
bound together).
First few allow for assigning compress stream to a HDAudio stream, what
is currently limited to pcm substreams only. These patches were already
present on this list and reviewed in the past [1].
The next few tidy existing debug-related code up so it's ready for
addition of new functionalities and make it clear which part of the avs
is debug related and which is not. These also simplify the existing
locking around the trace fifo.
Afterward, debug-related IPCs are defined along with stub soc-component
and compress DAI operations. Not much is done there as it's not a
standard PCM streaming scenario. Most code found in compress operations
is inherited from the HOST side of HDAudio streaming found in pcm.c
file of the driver.
Finally, a debugfs file operations are defined. These facilitate
connecting to DSP modules from which the data shall be gathered as well
as control and configuration of firmware logging. Additionally, entries
are added to allow for dumping snapshots of key memory windows.
sof_es8336_remove() calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This
means that the callback function may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Fixes: 89cdb224f2 ("ASoC: sof_es8336: reduce pop noise on speaker")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221205143721.3988988-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Fix an issue with starting the ACP DSP and support debug dumps to aid
maintainability.
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't populate the read-only arrays capture_reg_H and capture_reg_L
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202171450.1815346-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only arrays slotsel_2ch, slotsel_multi, v_pll
and v_div on the stack but instead make them static const. Also makes
the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202164156.1812971-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202170644.1814720-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
