Neil Armstrong says:
====================
net: ethernet: dwmac: oxnas glue removal
With [1] removing MPCore SMP support, this makes the OX820 barely usable,
associated with a clear lack of maintainance, development and migration to
dt-schema it's clear that Linux support for OX810 and OX820 should be removed.
In addition, the OX810 hasn't been booted for years and isn't even present
in an ARM config file.
For the OX820, lack of USB and SATA support makes the platform not usable
in the current Linux support and relies on off-tree drivers hacked from the
vendor (defunct for years) sources.
The last users are in the OpenWRT distribution, and today's removal means
support will still be in stable 6.1 LTS kernel until end of 2026.
If someone wants to take over the development even with lack of SMP, I'll
be happy to hand off maintainance.
It has been a fun time adding support for this architecture, but it's time
to get over!
This patchset only removes net changes, and is derived from:
https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org
---
Changes in v3:
- Removed applied changes
- Added Andy's tags
- Reduced for net
- Link to v2: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-0-fb6ab3dea87c@linaro.org
Changes in v2:
- s/maintainance/maintenance/
- added acked/review tags
- dropped already applied patches
- drop RFC
- Link to v1: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org
====================
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 dwmac glue.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 ethernet.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
selftests: New selftests for out-of-order-operations patches in mlxsw
In the past, the mlxsw driver made the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices needed to be added to
the bridge before IP addresses were configured on that bridge or SVI added
on top of it, because whatever happened before a netdevice was mlxsw upper
was generally ignored by mlxsw. Recently, several patch series were pushed
to introduce the bookkeeping and replays necessary to offload the full
state, not just the immediate configuration step.
In this patchset, introduce new selftests that directly exercise the out of
order code paths in mlxsw.
- Patch #1 adds new tests into the existing selftest router_bridge.sh.
- Patches #2-#5 add new generic selftests.
- Patches #6-#8 add new mlxsw-specific selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies driver behavior with regards to creation of RIFs for a
bridge as LAGs are added or removed to/from it, and ports added or removed
to/from the LAG.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies driver behavior with regards to creation of RIFs for LAG
VLAN uppers as ports are added or removed to/from the LAG.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test verifies driver behavior with regards to creation of RIFs for a
LAG as ports are added or removed to/from it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest to verify that routing through several bridges works when
LAG VLANs are used instead of physical ports, and that routing through LAG
VLANs themselves works as physical ports are de/enslaved.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest to verify that routing through a bridge works when LAG is
used instead of physical ports.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest that verifies routing through VLAN bridge uppers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest to verify that routing through a 1d bridge works when VLAN
upper of a physical port is used instead of a physical port. Also verify
that when a port is attached to an already-configured bridge, the
configuration is applied.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two tests to deslave a port from and reenslave to a bridge. This should
retain the ability of the system to forward traffic, but on an offloading
driver that is sensitive to ordering of operations, it might not.
The first test does this configuration in a way that relies on
vlan_default_pvid to assign the PVID. The second test disables that
autoconfiguration and configures PVID by hand in a separate step.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For XGMAC versions < 2.2 number of supported mdio C22 addresses is
restricted to 3. From XGMAC version 2.2 there are no restrictions on
the C22 addresses, it supports all valid mdio addresses(0 to 31).
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Radu Pirea says:
====================
Add TJA1120 support
This patch series got bigger than I expected. It cleans up the
next-c45-tja11xx driver and adds support for the TJA1120(1000BaseT1
automotive phy).
Master/slave custom implementation was replaced with the generic
implementation (genphy_c45_config_aneg/genphy_c45_read_status).
The TJA1120 and TJA1103 are a bit different when it comes to the PTP
interface. The timestamp read procedure was changed, some addresses were
changed and some bits were moved from one register to another. Adding
TJA1120 support was tricky, and I tried not to duplicate the code. If
something looks too hacky to you, I am open to suggestions.
====================
Link: https://lore.kernel.org/r/20230731091619.77961-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During PTP testing on early TJA1120 engineering samples I observed that
if the link is lost and recovered, the tx timestamps will be randomly
lost. To avoid this HW issue, the PCS should be reset.
Resetting the PCS will break the link and we should reset the PCS on
LINK UP -> LINK DOWN transition, otherwise we will trigger and infinite
loop of LINK UP -> LINK DOWN events.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-12-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On TJA1120, the external trigger timestamp now has a VALID bit. This
changes the logic and we can't use the TJA1103 procedure.
For TJA1103, we can always read a valid timestamp from the registers,
compare the new timestamp with the old timestamp and, if they are not the
same, an event occurred. This logic cannot be applied for TJA1120 because
the timestamp is 0 if the VALID bit is not set.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-11-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For TJA1120, the enable bit for cable test is not writable if the PHY is
not in test mode.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-10-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TJA1120 and TJA1103 have a set of functional safety hardware tests
executed after every reset, and when the tests are done, the IRQ line is
asserted. For the moment, the purpose of these handlers is to acknowledge
the IRQ and not to check the FUSA tests status.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-9-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The egress timestamp FIFO/circular buffer work different on TJA1120 than
TJA1103.
For TJA1103 the new timestamp should be manually moved from the FIFO to
the hardware buffer before checking if the timestamp is valid.
For TJA1120 the hardware will move automatically the new timestamp
from the FIFO to the buffer and the user should check the valid bit, read
the timestamp and unlock the buffer by writing any of the buffer
registers(which are read only).
Another change for the TJA1120 is the behaviour of the EGR TS IRQ bit.
This bit was a self-clear bit for TJA1103, but now should be cleared
before reading the timestamp.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-8-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The external trigger configuration for TJA1120 has changed. The PHY
supports sampling of the LTC on rising and on falling edge.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-7-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY_BASIC_T1_FEATURES are not the right features supported by TJA1103
anymore.
For example ethtool reports:
[root@alarm ~]# ethtool end0
Settings for end0:
Supported ports: [ TP ]
Supported link modes: 100baseT1/Full
10baseT1L/Full
10baseT1L/Full is not supported by TJA1103 and supported ports list is
not completed. The PHY also have a MII port.
genphy_c45_pma_read_abilities implementation can detect the PHY features
and they look like this.
[root@alarm ~]# ethtool end0
Settings for end0:
Supported ports: [ TP MII ]
Supported link modes: 100baseT1/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 100baseT1/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: off
master-slave cfg: forced master
master-slave status: master
Port: Twisted Pair
PHYAD: 1
Transceiver: external
MDI-X: Unknown
Supports Wake-on: g
Wake-on: d
Link detected: yes
SQI: 7/7
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-5-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Between TJA1120 and TJA1103 the hardware was improved, but some register
addresses were changed and some bit fields were moved from one register
to another.
Introduce the nxp_c45_reg_field structure and its associated functions to
abstract the differences between the PHYs.
Remove the defined bits and register addresses that are not common
between TJA1103 and TJA1120 and replace them with reg_fields and
register addresses from phydev->drv->driver_data.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230731091619.77961-4-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove RX BIST frame counters from the PHY statistics.
In production mode, these counters are always read as 0.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-3-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the custom implementation of master/save setup and read status
and use genphy_c45_config_aneg and genphy_c45_read_status since phylib
has support for master/slave setup and master/slave status.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731091619.77961-2-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gavin Li says:
====================
virtio_net: add per queue interrupt coalescing support
Currently, coalescing parameters are grouped for all transmit and receive
virtqueues. This patch series add support to set or get the parameters for
a specified virtqueue.
When the traffic between virtqueues is unbalanced, for example, one virtqueue
is busy and another virtqueue is idle, then it will be very useful to
control coalescing parameters at the virtqueue granularity.
Example command:
$ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10
Would set max_packets=10 to VQ 1.
$ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10
Would set max_packets=10 to VQ 0.
$ ethtool -Q eth5 queue_mask 0x1 --show-coalesce
Queue: 0
Adaptive RX: off TX: off
stats-block-usecs: 0
sample-interval: 0
pkt-rate-low: 0
pkt-rate-high: 0
rx-usecs: 222
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 256
tx-usecs: 222
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 256
rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0
rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0
====================
Link: https://lore.kernel.org/r/20230731070656.96411-1-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable per queue interrupt coalesce feature bit in driver and validate its
dependency with control queue.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230731070656.96411-4-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add interrupt_coalesce config in send_queue and receive_queue to cache user
config.
Send per virtqueue interrupt moderation config to underlying device in
order to have more efficient interrupt moderation and cpu utilization of
guest VM.
Additionally, address all the VQs when updating the global configuration,
as now the individual VQs configuration can diverge from the global
configuration.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230731070656.96411-3-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract interrupt coalescing settings to a structure so that it could be
reused in other data structures.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230731070656.96411-2-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is never implemented since the beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230731140437.37056-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert for loop to dsa_for_each macro to save some redundant write on
unconnected/unused port and tidy things up.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move qca8xxx hol fixup to separate function to tidy things up and to
permit using a more efficent loop in future patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside
the port loop and setup the LOOKUP MEMBER mask for user ports only to
the first CPU port.
This is to handle flooding condition where every CPU port is set as
target and prevent packet duplication for unknown frames from user ports.
Secondary CPU port LOOKUP MEMBER mask will be setup later when
port_change_master will be implemented.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address learning should initially be turned off by the driver for port
operation in standalone mode, then the DSA core handles changes to it
via ds->ops->port_bridge_flags().
Currently this is not the case for qca8k where learning is enabled
unconditionally in qca8k_setup for every user port.
Handle ports configured in standalone mode by making the learning
configurable and not enabling it by default.
Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to
enable learning for bridge that request it and tweak
.port_stp_state_set to correctly disable learning when port is
configured in standalone mode.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently checksum is recalculated and dsa tag stripped even if we later
don't find the dev.
To improve code, exit early if we don't find the dev and skip additional
operation on the skb since it will be freed anyway.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pedro Tammela says:
====================
net/sched: improve class lifetime handling
Valis says[0]:
============
Three classifiers (cls_fw, cls_u32 and cls_route) always copy
tcf_result struct into the new instance of the filter on update.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
============
Turns out these could have been spotted easily with proper warnings.
Improve the current class lifetime with wrappers that check for
overflow/underflow.
While at it add an extack for when a class in use is deleted.
[0] https://lore.kernel.org/all/20230721174856.3045-1-sec@valis.email/
====================
Link: https://lore.kernel.org/r/20230728153537.1865379-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'filter_cnt' counter is used to control a Qdisc class lifetime.
Each filter referecing this class by its id will eventually
increment/decrement this counter in their respective
'add/update/delete' routines.
As these operations are always serialized under rtnl lock, we don't
need an atomic type like 'refcount_t'.
It also means that we lose the overflow/underflow checks already
present in refcount_t, which are valuable to hunt down bugs
where the unsigned counter wraps around as it aids automated tools
like syzkaller to scream in such situations.
Wrap the open coded increment/decrement into helper functions and
add overflow checks to the operations.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: cleanup and improvements in the selftests
This small series of 4 patches adds some improvements in MPTCP
selftests:
- Patch 1 reworks the detailed report of mptcp_join.sh selftest to
better display what went well or wrong per test.
- Patch 2 adds colours (if supported, forced and/or not disabled) in
mptcp_join.sh selftest output to help spotting issues.
- Patch 3 modifies an MPTCP selftest tool to interact with the
path-manager via Netlink to always look for errors if any. This makes
sure odd behaviours can be seen in the logs and errors can be caught
later if needed.
- Patch 4 removes stdout and stderr redirections to /dev/null when using
pm_nl_ctl if no errors are expected in order to log odd behaviours.
====================
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-0-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All pm_nl_ctl commands were muted. If there was an unexpected error with
one of them, this was simply not visible in the logs, making the
analysis very hard. It could also hide misuse of commands by mistake.
Now the output is only muted when we do expect to have an error, e.g.
when giving invalid arguments on purpose.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-4-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a Netlink command for the MPTCP path-managers is not valid, it is
important to check if there are errors. If yes, they need to be reported
instead of being ignored and exiting without errors.
Now if no replies are expected, an ACK from the kernelspace is asked by
the userspace in order to always expect a reply. We can use the same
buffer that is currently always >1024 bytes. Then we can check if there
is an error (err->error), print it if any and report the error.
After this modification, it is required to mute expected errors in
mptcp_join.sh and pm_netlink.sh selftests:
- when trying to add a bad endpoint, e.g. duplicated
- when trying to set the two limits above the hard limit
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-3-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thanks to the parent commit, it is easy to change the output and add
some colours to help spotting issues.
The colours are not used if stdout is redirected or if NO_COLOR env var
is set to 1 as specified in https://no-color.org.
It is possible to force displaying the colours even if stdout is
redirected by setting this env var:
SELFTESTS_MPTCP_LIB_COLOR_FORCE=1
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-2-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies how the detailed results are printed, mainly to
improve what is displayed in case of issue:
- Now the test name (title) is printed earlier, when starting the test
if it is not intentionally skipped: by doing that, errors linked to
a test will be printed after having written the test name and then
avoid confusions.
- Due to the previous item, it is required to add a new line after
having printed the test name because in case of error with a command,
it is better not to have the output in the middle of the screen.
- Each check is printed on a dedicated line with aligned status (ok,
skip, fail): it is easier to spot which one has failed, simpler to
manage in the code not having to deal with alignment case by case and
helpers can be used to uniform what is done. These helpers can also be
useful later to do more actions depending on the results or change in
one place what is printed.
- Info messages have been reduced and aligned as well. And info messages
about the creation of the default test files of 1 KB are no longer
printed.
Example:
001 no JOIN
syn [ ok ]
synack [ ok ]
ack [ ok ]
Or with a skip and a failure:
001 no JOIN
syn [ ok ]
synack [fail] got 42 JOIN[s] synack expected 0
Server ns stats
(...)
Client ns stats
(...)
ack [skip]
Or with info:
104 Infinite map
Test file (size 128 KB) for client
Test file (size 128 KB) for server
file received by server has inverted byte at 169
5 corrupted pkts
syn [ ok ]
synack [ ok ]
While at it, verify_listener_events() now also print more info in case
of failure and in pm_nl_check_endpoint(), the test is marked as failed
instead of skipped if no ID has been given (internal selftest issue).
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-1-7e9cc530a9cd@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
introducted these but never implemented.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230729123456.36340-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix input argument parsing paths to skip from their error legs.
This fix helps to avoid false test failure reports without running
the test.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com>
Link: https://lore.kernel.org/r/20230729002403.4278-1-skhan@linuxfoundation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
