Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This reverts commit ccf11dbaa0.
Commit ccf11dbaa0 ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.
And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.
Reported-by: Guozihua (Scott) <guozihua@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYo0tOhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QJfAP47Ym9vacLc1m8/MUaRA/QjbJ/8t3TX
h/4McK8kiRudxgD/RiPHII6gJ8q+qpBrYWJZ4ZZaHE8v0oA1viuZfbuN2wc=
=KQYi
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
Factor out the blacklist hash creation with the get_raw_hash() helper.
This also centralize the "tbs" and "bin" prefixes and make them private,
which help to manage them consistently.
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210712170313.884724-5-mic@digikod.net
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix the following sparse warnings:
CHECK security/integrity/platform_certs/keyring_handler.c
security/integrity/platform_certs/keyring_handler.c:76:16: warning: Using plain integer as NULL pointer
security/integrity/platform_certs/keyring_handler.c:91:16: warning: Using plain integer as NULL pointer
security/integrity/platform_certs/keyring_handler.c:106:16: warning: Using plain integer as NULL pointer
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make hmac_tfm static since it's not used anywhere else besides the file
it is in.
Remove declaration of hash_tfm since it doesn't exist.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Return INTEGRITY_PASS for the enum integrity_status rather than 0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace 1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash.
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA may verify a file's integrity against a "good" value stored in the
'security.ima' xattr or as an appended signature, based on policy. When
the "good value" is stored in the xattr, the xattr may contain a file
hash or signature. In either case, the "good" value is preceded by a
header. The first byte of the xattr header indicates the type of data
- hash, signature - stored in the xattr. To support storing fs-verity
signatures in the 'security.ima' xattr requires further differentiating
the fs-verity signature from the existing IMA signature.
In addition the signatures stored in 'security.ima' xattr, need to be
disambiguated. Instead of directly signing the fs-verity digest, a new
signature format version 3 is defined as the hash of the ima_file_id
structure, which identifies the type of signature and the digest.
The IMA policy defines "which" files are to be measured, verified, and/or
audited. For those files being verified, the policy rules indicate "how"
the file should be verified. For example to require a file be signed,
the appraise policy rule must include the 'appraise_type' option.
appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
where 'imasig' is the original or signature format v2 (default),
where 'modsig' is an appended signature,
where 'sigv3' is the signature format v3.
The policy rule must also indicate the type of digest, if not the IMA
default, by first specifying the digest type:
digest_type:= [verity]
The following policy rule requires fsverity signatures. The rule may be
constrained, for example based on a fsuuid or LSM label.
appraise func=BPRM_CHECK digest_type=verity appraise_type=sigv3
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation to differentiate between unsigned regular IMA file
hashes and fs-verity's file digests in the IMA measurement list,
define a new template field named 'd-ngv2'.
Also define two new templates named 'ima-ngv2' and 'ima-sigv2', which
include the new 'd-ngv2' field.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Integrity file violations - ToM/ToU, open writers - are recorded in the IMA
measurement list, containing 0x00's in both the template data and file data
hash fields, but 0xFF's are actually extended into TPM PCRs. Although the
original 'ima' template data field ('d') is limited to 20 bytes, the 'd-ng'
template digest field is not.
The violation file data hash template field ('d-ng') is unnecessarily hard
coded to SHA1. Instead of simply replacing the hard coded SHA1 hash
algorithm with a larger hash algorithm, use the hash algorithm as defined
in "ima_hash_algo". ima_hash_algo is set to either the Kconfig IMA default
hash algorithm or as defined on the boot command line (ima_hash=).
Including a non-SHA1 file data hash algorithm in the 'd-ng' field of
violations is a cosmetic change. The template data hash field, which is
extended into the TPM PCRs, is not affected by this change and should not
affect attestation of the IMA measurement list.
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Initially the 'd-ng' template field did not prefix the digest with either
"md5" or "sha1" hash algorithms. Prior to being upstreamed this changed,
but the comments and documentation were not updated. Fix the comments
and documentation.
Fixes: 4d7aeee73f ("ima: define new template ima-ng and template fields d-ng and n-ng")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The original 'ima' measurement list template contains a hash, defined
as 20 bytes, and a null terminated pathname, limited to 255
characters. Other measurement list templates permit both larger hashes
and longer pathnames. When the "ima" template is configured as the
default, a new measurement list template (ima_template=) must be
specified before specifying a larger hash algorithm (ima_hash=) on the
boot command line.
To avoid this boot command line ordering issue, remove the legacy "ima"
template configuration option, allowing it to still be specified on the
boot command line.
The root cause of this issue is that during the processing of ima_hash,
we would try to check whether the hash algorithm is compatible with the
template. If the template is not set at the moment we do the check, we
check the algorithm against the configured default template. If the
default template is "ima", then we reject any hash algorithm other than
sha1 and md5.
For example, if the compiled default template is "ima", and the default
algorithm is sha1 (which is the current default). In the cmdline, we put
in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be
that ima starts with ima-ng as the template and sha256 as the hash
algorithm. However, during the processing of "ima_hash=",
"ima_template=" has not been processed yet, and hash_setup would check
the configured hash algorithm against the compiled default: ima, and
reject sha256. So at the end, the hash algorithm that is actually used
will be sha1.
With template "ima" removed from the configured default, we ensure that
the default tempalte would at least be "ima-ng" which allows for
basically any hash algorithm.
This change would not break the algorithm compatibility checks for IMA.
Fixes: 4286587dcc ("ima: add Kconfig default measurement list template")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The pointer 'file' is being initialized with a value that is never read,
it is being re-assigned the same value later on closer to where it is
being first used. The initialization is redundant and can be removed.
Cleans up clang scan build warning:
security/integrity/ima/ima_main.c:434:15: warning: Value stored to 'file'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYji6mxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bbvAQDB0uFJXS+FutMZSdfoXdvoV36piSyV
KNEo+sM0Ie0FTQEAtHnMZbIB2Tc5szJXaxgDbr6XbRKW4aaJonkvnYF93QQ=
=ZuAU
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.
Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.
In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).
Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.
This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().
For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
Fix the following warnings in ima_main.c, displayed with W=n make argument:
security/integrity/ima/ima_main.c:432: warning: Function parameter or
member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
'id' description in 'ima_post_load_data'
Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com
With the introduction of uefi_check_trust_mok_keys, it signifies the end-
user wants to trust the machine keyring as trusted keys. If they have
chosen to trust the machine keyring, load the qualifying keys into it
during boot, then link it to the secondary keyring . If the user has not
chosen to trust the machine keyring, it will be empty and not linked to
the secondary keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
A new Machine Owner Key (MOK) variable called MokListTrustedRT has been
introduced in shim. When this UEFI variable is set, it indicates the
end-user has made the decision themselves that they wish to trust MOK keys
within the Linux trust boundary. It is not an error if this variable
does not exist. If it does not exist, the MOK keys should not be trusted
within the kernel.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Expose the .machine keyring created in integrity code by adding
a reference. Store a reference to the machine keyring in
system keyring code. The system keyring code needs this to complete
the keyring link to the machine keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Currently both Secure Boot DB and Machine Owner Keys (MOK) go through
the same keyring handler (get_handler_for_db). With the addition of the
new machine keyring, the end-user may choose to trust MOK keys.
Introduce a new keyring handler specific for MOK keys. If MOK keys are
trusted by the end-user, use the new keyring handler instead.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Many UEFI Linux distributions boot using shim. The UEFI shim provides
what is called Machine Owner Keys (MOK). Shim uses both the UEFI Secure
Boot DB and MOK keys to validate the next step in the boot chain. The
MOK facility can be used to import user generated keys. These keys can
be used to sign an end-users development kernel build. When Linux
boots, both UEFI Secure Boot DB and MOK keys get loaded in the Linux
.platform keyring.
Define a new Linux keyring called machine. This keyring shall contain just
MOK keys and not the remaining keys in the platform keyring. This new
machine keyring will be used in follow on patches. Unlike keys in the
platform keyring, keys contained in the machine keyring will be trusted
within the kernel if the end-user has chosen to do so.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
make W=1 generates the following warning in keyring_handler.c
security/integrity/platform_certs/keyring_handler.c:71:30: warning: no previous prototype for get_handler_for_db [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_db(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~
security/integrity/platform_certs/keyring_handler.c:82:30: warning: no previous prototype for get_handler_for_dbx [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_dbx(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~~
Add the missing prototypes by including keyring_handler.h.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
To support larger hash digests in the 'iint' cache, instead of defining
the 'digest' field as the maximum digest size, the 'digest' field was
defined as a flexible array variable. The "ima_digest_data" struct was
wrapped inside a local structure with the maximum digest size. But
before adding the record to the iint cache, memory for the exact digest
size was dynamically allocated.
The original reason for defining the 'digest' field as a flexible array
variable is still valid for the 'iint' cache use case. Instead of
wrapping the 'ima_digest_data' struct in a local structure define
'ima_max_digest_data' struct.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Simple policy rule options, such as fowner, uid, or euid, can be checked
immediately, while other policy rule options, such as requiring a file
signature, need to be deferred.
The 'flags' field in the integrity_iint_cache struct contains the policy
action', 'subaction', and non action/subaction.
action: measure/measured, appraise/appraised, (collect)/collected,
audit/audited
subaction: appraise status for each hook (e.g. file, mmap, bprm, read,
creds)
non action/subaction: deferred policy rule options and state
Rename the IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If an error occurs when creating a securityfs file, return the exact
error code to the caller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There are a few minor typos in the comments. Fix these.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit c2426d2ad5 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.
Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.
Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.
Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.
Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.
Fixes: 3323eec921 ("integrity: IMA as an integrity service provider")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't leak a reference to the key if its algorithm is unknown.
Fixes: 947d705972 ("ima: Support EC keys for signature verification")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYdxh3xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bXsAP9xioC+sDpA+KgicrTxLQp2HBHVdkdj
hnsSw7KE6d1YFwD/Zu1BPi/iX1HHcEvTm34x9jKWeU54VCyqsXJG+zArDA0=
=/eFf
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"The few changes are all kexec related:
- The MOK keys are loaded onto the .platform keyring in order to
verify the kexec kernel image signature.
However, the MOK keys should only be trusted when secure boot is
enabled. Before loading the MOK keys onto the .platform keyring,
make sure the system is booted in secure boot mode.
- When carrying the IMA measurement list across kexec, limit dumping
the measurement list to when dynamic debug or CONFIG_DEBUG is
enabled.
- kselftest: add kexec_file_load selftest support for PowerNV and
other cleanup"
* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
selftests/kexec: Enable secureboot tests for PowerPC
ima: silence measurement list hexdump during kexec
selftests/kexec: update searching for the Kconfig
selftest/kexec: fix "ignored null byte in input" warning
integrity: Do not load MOK and MOKx when secure boot be disabled
ima: Fix undefined arch_ima_get_secureboot() and co
Directly calling print_hex_dump() dumps the IMA measurement list on soft
resets (kexec) straight to the syslog (kmsg/dmesg) without considering the
DEBUG flag or the dynamic debug state, causing the output to be always
printed, including during boot time.
Since this output is only valid for IMA debugging, but not necessary on
normal kexec operation, print_hex_dump_debug() adheres to the pr_debug()
behavior: the dump is only printed to syslog when DEBUG is defined or when
explicitly requested by the user through dynamic debugging.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The security of Machine Owner Key (MOK) relies on secure boot. When
secure boot is disabled, EFI firmware will not verify binary code. Then
arbitrary efi binary code can modify MOK when rebooting.
This patch prevents MOK/MOKx be loaded when secure boot be disabled.
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The evm_fixmode is only configurable by command-line option and it is never
modified outside initcalls, so declaring it with __ro_after_init is better.
Signed-off-by: Austin Kim <austin.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA currently supports the concept of rules based on uid where the rule
is based on the uid of the file owner or the uid of the user accessing
the file. Provide the ability to have similar rules based on gid.
Signed-off-by: Curtis Veit <veit@vpieng.com>
Co-developed-by: Alex Henrie <alexh@vpitech.com>
Signed-off-by: Alex Henrie <alexh@vpitech.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
scripts/checkpatch.pl wants function arguments to have names; and Mimi
prefers to keep the line length in functions to 80 characters or less.
Signed-off-by: Alex Henrie <alexh@vpitech.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The current IMA ruleset is identified by the variable "ima_rules"
that default to "&ima_default_rules". When loading a custom policy
for the first time, the variable is updated to "&ima_policy_rules"
instead. That update isn't RCU-safe, and deadlocks are possible.
Indeed, some functions like ima_match_policy() may loop indefinitely
when traversing "ima_default_rules" with list_for_each_entry_rcu().
When iterating over the default ruleset back to head, if the list
head is "ima_default_rules", and "ima_rules" have been updated to
"&ima_policy_rules", the loop condition (&entry->list != ima_rules)
stays always true, traversing won't terminate, causing a soft lockup
and RCU stalls.
Introduce a temporary value for "ima_rules" when iterating over
the ruleset to avoid the deadlocks.
Signed-off-by: liqiong <liqiong@nfschina.com>
Reviewed-by: THOBY Simon <Simon.THOBY@viveris.fr>
Fixes: 38d859f991 ("IMA: policy can now be updated multiple times")
Reported-by: kernel test robot <lkp@intel.com> (Fix sparse: incompatible types in comparison expression.)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYS4c6hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b4OAP9l7cnpkOzVUtjoNIIYdIiKTDp+Kb8v
3o08lxtyzALfKgEAlrizzLfphqLa2yCdxbyaTjkx19J7tav27xVti8uVGgs=
=hIxY
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured
via IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmEuWG0ACgkQxSPxCi2d
A1rZIgf+JSSR2/DBg4j9w0oVsay+rfFB+tyZLVvHFEraukDbxOKy7Dck1GZybQBq
mFTqCWKQHOvME4nf4swIY/klPi3VhPNyWDY/hI/FAFaiTskLqjxhQQc1+cECLkMx
ittIKYvWgcg7kflCuN6LiUslTB/P4Lo6GmNqMOhFn3nkN5hg76xaxPK+JCMGLgTM
qs+mbZfB1Z51G+cDlU0E5WCn37k/jqqwhb8NN90Zozgi7ByQEO01bd2EkSsYT0T/
ZrDOWP8M8u14QHAV0e8n9e6a/d5atIV5g/+XrDbVDvzwtq7eI+ojBNHDBpcgxiH7
/AVb9AM4Pd87ExWMbsBxr3Hgbc5+dQ==
=yIsi
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM infrastructure for IMA-based remote attestion. These changes
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured via
IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
* tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: use in_hardirq() instead of deprecated in_irq()
dm ima: update dm documentation for ima measurement support
dm ima: update dm target attributes for ima measurements
dm ima: add a warning in dm_init if duplicate ima events are not measured
dm ima: prefix ima event name related to device mapper with dm_
dm ima: add version info to dm related events in ima log
dm ima: prefix dm table hashes in ima log with hash algorithm
dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
dm: add documentation for IMA measurement support
dm: update target status functions to support IMA measurement
dm ima: measure data on device rename
dm ima: measure data on table clear
dm ima: measure data on device remove
dm ima: measure data on device resume
dm ima: measure data on table load
dm writecache: add event counters
dm writecache: report invalid return from writecache_map helpers
dm writecache: further writecache_map() cleanup
dm writecache: factor out writecache_map_remap_origin()
dm writecache: split up writecache_map() to improve code readability
When print GUIDs supply pointer to the efi_guid_t (guid_t) type rather
its internal members.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The new function validate_hash_algo() assumed that ima_get_hash_algo()
always return a valid 'enum hash_algo', but it returned the
user-supplied value present in the digital signature without
any bounds checks.
Update ima_get_hash_algo() to always return a valid hash algorithm,
defaulting on 'ima_hash_algo' when the user-supplied value inside
the xattr is invalid.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reported-by: syzbot+e8bafe7b82c739eaf153@syzkaller.appspotmail.com
Fixes: 50f742dd91 ("IMA: block writes of the security.ima xattr with unsupported algorithms")
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
SETXATTR_CHECK policy rules assume that any algorithm listed in the
'appraise_algos' flag must be accepted when performing setxattr() on
the security.ima xattr. However nothing checks that they are
available in the current kernel. A userland application could hash
a file with a digest that the kernel wouldn't be able to verify.
However, if SETXATTR_CHECK is not in use, the kernel already forbids
that xattr write.
Verify that algorithms listed in appraise_algos are available to the
current kernel and reject the policy update otherwise. This will fix
the inconsistency between SETXATTR_CHECK and non-SETXATTR_CHECK
behaviors.
That filtering is only performed in ima_parse_appraise_algos() when
updating policies so that we do not have to pay the price of
allocating a hash object every time validate_hash_algo() is called
in ima_inode_setxattr().
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
While users can restrict the accepted hash algorithms for the
security.ima xattr file signature when appraising said file, users
cannot restrict the algorithms that can be set on that attribute:
any algorithm built in the kernel is accepted on a write.
Define a new value for the ima policy option 'func' that restricts
globally the hash algorithms accepted when writing the security.ima
xattr.
When a policy contains a rule of the form
appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
only values corresponding to one of these three digest algorithms
will be accepted for writing the security.ima xattr. Attempting to
write the attribute using another algorithm (or "free-form" data)
will be denied with an audit log message. In the absence of such a
policy rule, the default is still to only accept hash algorithms
built in the kernel (with all the limitations that entails).
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel has the ability to restrict the set of hash algorithms it
accepts for the security.ima xattr when it appraises files.
Define a new IMA policy rule option "appraise_algos=", using the
mentioned mechanism to expose a user-toggable policy knob to opt-in
to that restriction and select the desired set of algorithms that
must be accepted.
When a policy rule uses the 'appraise_algos' option, appraisal of a
file referenced by that rule will now fail if the digest algorithm
employed to hash the file was not one of those explicitly listed in
the option. In its absence, any hash algorithm compiled in the
kernel will be accepted.
For example, on a system where SELinux is properly deployed, the rule
appraise func=BPRM_CHECK obj_type=iptables_exec_t \
appraise_algos=sha256,sha384
will block the execution of iptables if the xattr security.ima of its
executables were not hashed with either sha256 or sha384.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel accepts any hash algorithm as a value for the security.ima
xattr. Users may wish to restrict the accepted algorithms to only
support strong cryptographic ones.
Provide the plumbing to restrict the permitted set of hash algorithms
used for verifying file hashes and signatures stored in security.ima
xattr.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
By default, writes to the extended attributes security.ima will be
allowed even if the hash algorithm used for the xattr is not compiled
in the kernel (which does not make sense because the kernel would not
be able to appraise that file as it lacks support for validating the
hash).
Prevent and audit writes to the security.ima xattr if the hash algorithm
used in the new value is not available in the current kernel.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.
The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line. With commit ab60368ab6 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256
Remove the CRYPTO_MD5 dependency for IMA.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.]
Cc: stable@vger.kernel.org # 4.17
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch performs the final modification necessary to pass the buffer
measurement to callers, so that they provide a functionality similar to
ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to
ima_measure_critical_data() and process_buffer_measurement().
These functions calculate the digest even if there is no suitable rule in
the IMA policy and, in this case, they simply return 1 before generating a
new measurement entry.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
ima_measure_critical_data() and process_buffer_measurement() currently
don't return a result as, unlike appraisal-related functions, the result is
not used by callers to deny an operation. Measurement-related functions
instead rely on the audit subsystem to notify the system administrator when
an error occurs.
However, ima_measure_critical_data() and process_buffer_measurement() are a
special case, as these are the only functions that can return a buffer
measurement (for files, there is ima_file_hash()). In a subsequent patch,
they will be modified to return the calculated digest.
In preparation to return the result of the digest calculation, this patch
modifies the return type from void to int, and returns 0 if the buffer has
been successfully measured, a negative value otherwise.
Given that the result of the measurement is still not necessary, this patch
does not modify the behavior of existing callers by processing the returned
value. For those, the return value is ignored.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Acked-by: Paul Moore <paul@paul-moore.com> (for the SELinux bits)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Buffer measurements, unlike file measurements, are not accessible after the
measurement is done, as buffers are not suitable for use with the
integrity_iint_cache structure (there is no index, for files it is the
inode number). In the subsequent patches, the measurement (digest) will be
returned directly by the functions that perform the buffer measurement,
ima_measure_critical_data() and process_buffer_measurement().
A caller of those functions also needs to know the algorithm used to
calculate the digest. Instead of adding the algorithm as a new parameter to
the functions, this patch provides it separately with the new function
ima_get_current_hash_algo().
Since the hash algorithm does not change after the IMA setup phase, there
is no risk of races (obtaining a digest calculated with a different
algorithm than the one returned).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: annotate ima_hash_algo as __ro_after_init]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With W=1 build, the compiler throws warning message as below:
security/integrity/ima/ima_mok.c:24:12: warning:
no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
__init int ima_mok_init(void)
Silence the warning by adding static keyword to ima_mok_init().
Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d7 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel and the user obtain an xattr value in two different ways:
kernel (EVM): uses vfs_getxattr_alloc() which obtains the xattr value from
the filesystem handler (raw value);
user (ima-evm-utils): uses vfs_getxattr() which obtains the xattr value
from the LSMs (normalized value).
Normally, this does not have an impact unless security.selinux is set with
setfattr, with a value not terminated by '\0' (this is not the recommended
way, security.selinux should be set with the appropriate tools such as
chcon and restorecon).
In this case, the kernel and the user see two different xattr values: the
former sees the xattr value without '\0' (raw value), the latter sees the
value with '\0' (value normalized by SELinux).
This could result in two different verification outcomes from EVM and
ima-evm-utils, if a signature was calculated with a security.selinux value
terminated by '\0' and the value set in the filesystem is not terminated by
'\0'. The former would report verification failure due to the missing '\0',
while the latter would report verification success (because it gets the
normalized value with '\0').
This patch mitigates this issue by comparing in evm_calc_hmac_or_hash() the
size of the xattr returned by the two xattr functions and by warning the
user if there is a discrepancy.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Output the data used in calculating the EVM digest and the resulting
digest as ascii hexadecimal strings.
Suggested-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> (CONFIG_DYNAMIC_DEBUG)
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com> (Use %zu for size_t)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA measures contents of a given file/buffer/critical-data record,
and properly re-measures it on change. However, IMA does not measure
the duplicate value for a given record, since TPM extend is a very
expensive operation. For example, if the record changes from value
'v#1' to 'v#2', and then back to 'v#1', IMA will not measure and log
the last change to 'v#1', since the hash of 'v#1' for that record is
already present in the IMA htable. This limits the ability of an
external attestation service to accurately determine the current state
of the system. The service would incorrectly conclude that the latest
value of the given record on the system is 'v#2', and act accordingly.
Define and use a new Kconfig option IMA_DISABLE_HTABLE to permit
duplicate records in the IMA measurement list.
In addition to the duplicate measurement records described above,
other duplicate file measurement records may be included in the log,
when CONFIG_IMA_DISABLE_HTABLE is enabled. For example,
- i_version is not enabled,
- i_generation changed,
- same file present on different filesystems,
- an inode is evicted from dcache
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
[zohar@linux.ibm.com: updated list of duplicate measurement records]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The function prototype for ima_add_kexec_buffer() is present
in 'linux/ima.h'. But this header file is not included in
ima_kexec.c where the function is implemented. This results
in the following compiler warning when "-Wmissing-prototypes" flag
is turned on:
security/integrity/ima/ima_kexec.c:81:6: warning: no previous prototype
for function 'ima_add_kexec_buffer' [-Wmissing-prototypes]
Include the header file 'linux/ima.h' in ima_kexec.c to fix
the compiler warning.
Fixes: dce92f6b11 (arm64: Enable passing IMA log to next kernel on kexec)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead
of just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch fixes the sparse warning for ima_post_key_create_or_update() by
adding the header file that defines the prototype (linux/ima.h).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The endianness of a variable written to the measurement list cannot be
determined at compile time, as it depends on the value of the
ima_canonical_fmt global variable (set through a kernel option with the
same name if the machine is big endian).
If ima_canonical_fmt is false, the endianness of a variable is the same as
the machine; if ima_canonical_fmt is true, the endianness is little endian.
The warning arises due to this type of instruction:
var = cpu_to_leXX(var)
which tries to assign a value in little endian to a variable with native
endianness (little or big endian).
Given that the variables set with this instruction are not used in any
operation but just written to a buffer, it is safe to force the type of the
value being set to be the same of the type of the variable with:
var = (__force <var type>)cpu_to_leXX(var)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The code expects that the values being parsed from a buffer when the
ima_canonical_fmt global variable is true are in little endian. Thus, this
patch sets the casting types accordingly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch avoids that evm_write_xattrs() returns an error when audit is
not enabled. The ab variable can be NULL and still be passed to the other
audit_log_() functions, as those functions do not include any instruction.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the recent introduction of the evmsig template field, remote verifiers
can obtain the EVM portable signature instead of the IMA signature, to
verify file metadata.
After introducing the new fields to include file metadata in the
measurement list, this patch finally defines the evm-sig template, whose
format is:
d-ng|n-ng|evmsig|xattrnames|xattrlengths|xattrvalues|iuid|igid|imode
xattrnames, xattrlengths and xattrvalues are populated only from defined
EVM protected xattrs, i.e. the ones that EVM considers to verify the
portable signature. xattrnames and xattrlengths are populated only if the
xattr is present.
xattrnames and xattrlengths are not necessary for verifying the EVM
portable signature, but they are included for completeness of information,
if a remote verifier wants to infer more from file metadata.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields xattrnames, xattrlengths and
xattrvalues, which contain respectively a list of xattr names (strings,
separated by |), lengths (u32, hex) and values (hex). If an xattr is not
present, the name and length are not displayed in the measurement list.
Reported-by: kernel test robot <lkp@intel.com> (Missing prototype def)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, the evm_config_default_xattrnames array contains xattr names
only related to LSMs which are enabled in the kernel configuration.
However, EVM portable signatures do not depend on local information and a
vendor might include in the signature calculation xattrs that are not
enabled in the target platform.
Just including all xattrs names in evm_config_default_xattrnames is not a
safe approach, because a target system might have already calculated
signatures or HMACs based only on the enabled xattrs. After applying this
patch, EVM would verify those signatures and HMACs with all xattrs instead.
The non-enabled ones, which could possibly exist, would cause a
verification error.
Thus, this patch adds a new field named enabled to the xattr_list
structure, which is set to true if the LSM associated to a given xattr name
is enabled in the kernel configuration. The non-enabled xattrs are taken
into account only in evm_calc_hmac_or_hash(), if the passed security.evm
type is EVM_XATTR_PORTABLE_DIGSIG.
The new function evm_protected_xattr_if_enabled() has been defined so that
IMA can include all protected xattrs and not only the enabled ones in the
measurement list, if the new template fields xattrnames, xattrlengths or
xattrvalues have been included in the template format.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template field imode, which includes the
inode mode. It can be used by a remote verifier to verify the EVM portable
signature, if it was included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields iuid and igid, which include
respectively the inode UID and GID. For idmapped mounts, still the original
UID and GID are provided.
These fields can be used to verify the EVM portable signature, if it was
included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch introduces the new function ima_show_template_uint(). This can
be used for showing integers of different sizes in ASCII format. The
function ima_show_template_data_ascii() automatically determines how to
print a stored integer by checking the integer size.
If integers have been written in canonical format,
ima_show_template_data_ascii() calls the appropriate leXX_to_cpu() function
to correctly display the value.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Files might come from a remote source and might have xattrs, including
security.ima. It should not be IMA task to decide whether security.ima
should be kept or not. This patch removes the removexattr() system
call in ima_inode_post_setattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the patch to accept EVM portable signatures when the
appraise_type=imasig requirement is specified in the policy, appraisal can
be successfully done even if the file does not have an IMA signature.
However, remote attestation would not see that a different signature type
was used, as only IMA signatures can be included in the measurement list.
This patch solves the issue by introducing the new template field 'evmsig'
to show EVM portable signatures and by including its value in the existing
field 'sig' if the IMA signature is not found.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
System administrators can require that all accessed files have a signature
by specifying appraise_type=imasig in a policy rule.
Currently, IMA signatures satisfy this requirement. Appended signatures may
also satisfy this requirement, but are not applicable as IMA signatures.
IMA/appended signatures ensure data source authentication for file content
and prevent any change. EVM signatures instead ensure data source
authentication for file metadata. Given that the digest or signature of the
file content must be included in the metadata, EVM signatures provide the
same file data guarantees of IMA signatures, as well as providing file
metadata guarantees.
This patch lets systems protected with EVM signatures pass appraisal
verification if the appraise_type=imasig requirement is specified in the
policy. This facilitates deployment in the scenarios where only EVM
signatures are available.
The patch makes the following changes:
file xattr types:
security.ima: IMA_XATTR_DIGEST/IMA_XATTR_DIGEST_NG
security.evm: EVM_XATTR_PORTABLE_DIGSIG
execve(), mmap(), open() behavior (with appraise_type=imasig):
before: denied (file without IMA signature, imasig requirement not met)
after: allowed (file with EVM portable signature, imasig requirement met)
open(O_WRONLY) behavior (without appraise_type=imasig):
before: allowed (file without IMA signature, not immutable)
after: denied (file with EVM portable signature, immutable)
In addition, similarly to IMA signatures, this patch temporarily allows
new files without or with incomplete metadata to be opened so that content
can be written.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the patch to allow xattr/attr operations if a portable signature
verification fails, cp and tar can copy all xattrs/attrs so that at the
end of the process verification succeeds.
However, it might happen that the xattrs/attrs are already set to the
correct value (taken at signing time) and signature verification succeeds
before the copy has completed. For example, an archive might contains files
owned by root and the archive is extracted by root.
Then, since portable signatures are immutable, all subsequent operations
fail (e.g. fchown()), even if the operation is legitimate (does not alter
the current value).
This patch avoids this problem by reporting successful operation to user
space when that operation does not alter the current value of xattrs/attrs.
With this patch, the one that introduces evm_hmac_disabled() and the one
that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM
portable signatures can be used without disabling metadata verification
(by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata
verification enabled, altering immutable metadata protected with a portable
signature that was successfully verified will be denied (existing
behavior).
Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function]
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation for 'evm: Allow setxattr() and setattr() for unmodified
metadata', this patch passes mnt_userns to the inode set/remove xattr hooks
so that the GID of the inode on an idmapped mount is correctly determined
by posix_acl_update_mode().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If files with portable signatures are copied from one location to another
or are extracted from an archive, verification can temporarily fail until
all xattrs/attrs are set in the destination. Only portable signatures may
be moved or copied from one file to another, as they don't depend on
system-specific information such as the inode generation. Instead portable
signatures must include security.ima.
Unlike other security.evm types, EVM portable signatures are also
immutable. Thus, it wouldn't be a problem to allow xattr/attr operations
when verification fails, as portable signatures will never be replaced with
the HMAC on possibly corrupted xattrs/attrs.
This patch first introduces a new integrity status called
INTEGRITY_FAIL_IMMUTABLE, that allows callers of
evm_verify_current_integrity() to detect that a portable signature didn't
pass verification and then adds an exception in evm_protect_xattr() and
evm_inode_setattr() for this status and returns 0 instead of -EPERM.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When a file is being created, LSMs can set the initial label with the
inode_init_security hook. If no HMAC key is loaded, the new file will have
LSM xattrs but not the HMAC. It is also possible that the file remains
without protected xattrs after creation if no active LSM provided it, or
because the filesystem does not support them.
Unfortunately, EVM will deny any further metadata operation on new files,
as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected
xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected
xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would
limit the usability of EVM when only a public key is loaded, as commands
such as cp or tar with the option to preserve xattrs won't work.
This patch introduces the evm_hmac_disabled() function to determine whether
or not it is safe to ignore verification errors, based on the ability of
EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be
loaded in the future due to the EVM_SETUP_COMPLETE initialization flag,
allowing an operation despite the attrs/xattrs being found invalid will not
make them valid.
Since the post hooks can be executed even when the HMAC key is not loaded,
this patch also ensures that the EVM_INIT_HMAC initialization flag is set
before the post hooks call evm_update_evmxattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When EVM_ALLOW_METADATA_WRITES is set, EVM allows any operation on
metadata. Its main purpose is to allow users to freely set metadata when it
is protected by a portable signature, until an HMAC key is loaded.
However, callers of evm_verifyxattr() are not notified about metadata
changes and continue to rely on the last status returned by the function.
For example IMA, since it caches the appraisal result, will not call again
evm_verifyxattr() until the appraisal flags are cleared, and will grant
access to the file even if there was a metadata operation that made the
portable signature invalid.
This patch introduces evm_revalidate_status(), which callers of
evm_verifyxattr() can use in their xattr hooks to determine whether
re-validation is necessary and to do the proper actions. IMA calls it in
its xattr hooks to reset the appraisal flags, so that the EVM status is
re-evaluated after a metadata operation.
Lastly, this patch also adds a call to evm_reset_status() in
evm_inode_post_setattr() to invalidate the cached EVM status after a
setattr operation.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
temporarily disable metadata verification until all xattrs/attrs necessary
to verify an EVM portable signature are copied to the file. This flag is
cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
calculated on unverified xattrs/attrs.
Currently EVM unnecessarily denies setting this flag if EVM is initialized
with a public key, which is not a concern as it cannot be used to trust
xattrs/attrs updates. This patch removes this limitation.
Fixes: ae1ba1676b ("EVM: Allow userland to permit modification of EVM-protected metadata")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.16.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The public builtin keys do not need to be appraised by IMA as the
restriction on the IMA/EVM trusted keyrings ensures that a key can be
loaded only if it is signed with a key on the builtin or secondary
keyrings.
However, when evm_load_x509() is called, appraisal is already enabled and
a valid IMA signature must be added to the EVM key to pass verification.
Since the restriction is applied on both IMA and EVM trusted keyrings, it
is safe to disable appraisal also when the EVM key is loaded. This patch
calls evm_load_x509() inside ima_load_x509() if CONFIG_IMA_LOAD_X509 is
enabled, which crosses the normal IMA and EVM boundary.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
evm_inode_init_security() requires an HMAC key to calculate the HMAC on
initial xattrs provided by LSMs. However, it checks generically whether a
key has been loaded, including also public keys, which is not correct as
public keys are not suitable to calculate the HMAC.
Originally, support for signature verification was introduced to verify a
possibly immutable initial ram disk, when no new files are created, and to
switch to HMAC for the root filesystem. By that time, an HMAC key should
have been loaded and usable to calculate HMACs for new files.
More recently support for requiring an HMAC key was removed from the
kernel, so that signature verification can be used alone. Since this is a
legitimate use case, evm_inode_init_security() should not return an error
when no HMAC key has been loaded.
This patch fixes this problem by replacing the evm_key_loaded() check with
a check of the EVM_INIT_HMAC flag in evm_initialized.
Fixes: 26ddabfe96 ("evm: enable EVM when X509 certificate is loaded")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.5.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes: f00d797507 ("EVM: Allow userspace to signal an RSA key has been loaded")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=gkFF
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"In addition to loading the kernel module signing key onto the builtin
keyring, load it onto the IMA keyring as well.
Also six trivial changes and bug fixes"
* tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies
ima: Fix fall-through warnings for Clang
integrity: Add declarations to init_once void arguments.
ima: Fix function name error in comment.
ima: enable loading of build time generated key on .ima keyring
ima: enable signing of modules with build time generated key
keys: cleanup build time module signing keys
ima: Fix the error code for restoring the PCR value
ima: without an IMA policy loaded, return quickly
- Refactoring powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
-----BEGIN PGP SIGNATURE-----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=rF27
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
-----BEGIN PGP SIGNATURE-----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=HTEy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
-----BEGIN PGP SIGNATURE-----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=fLQY
-----END PGP SIGNATURE-----
Merge tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull x509 dbx/mokx UEFI support from David Howells:
"Here's a set of patches from Eric Snowberg[1] that add support for
EFI_CERT_X509_GUID entries in the dbx and mokx UEFI tables (such
entries cause matching certificates to be rejected).
These are currently ignored and only the hash entries are made use of.
Additionally Eric included his patches to allow such certificates to
be preloaded.
These patches deal with CVE-2020-26541.
To quote Eric:
'This is the fifth patch series for adding support for
EFI_CERT_X509_GUID entries [2]. It has been expanded to not only
include dbx entries but also entries in the mokx. Additionally
my series to preload these certificate [3] has also been
included'"
Link: https://lore.kernel.org/r/20210122181054.32635-1-eric.snowberg@oracle.com [1]
Link: https://patchwork.kernel.org/project/linux-security-module/patch/20200916004927.64276-1-eric.snowberg@oracle.com/ [2]
Link: https://lore.kernel.org/patchwork/cover/1315485/ [3]
* tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
integrity: Load mokx variables into the blacklist keyring
certs: Add ability to preload revocation certs
certs: Move load_system_certificate_list to a common function
certs: Add EFI_CERT_X509_GUID support for dbx entries
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
init_once is a callback to kmem_cache_create. The parameter
type of this function is void *, so it's better to give a
explicit cast here.
Signed-off-by: Jiele Zhao <unclexiaole@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The original function name was ima_path_check(). The policy parsing
still supports PATH_CHECK. Commit 9bbb6cad01 ("ima: rename
ima_path_check to ima_file_check") renamed the function to
ima_file_check(), but missed modifying the function name in the
comment.
Fixes: 9bbb6cad01 ("ima: rename ima_path_check to ima_file_check").
Signed-off-by: Jiele Zhao <unclexiaole@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
