As the atomisp driver should already be handling the ISP
PCI ID, there's no sense on keeping the dummy driver enabled
in tis case.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ignore events with a type of 0x0011 and a code of 0xfff2 / 0xfff3,
this silences the following messages being logged when the keyboard is
detached / attached on a Dell Venue 11 Pro 7130:
[ 63.621953] dell_wmi: Unknown key with type 0x0011 and code 0xfff2 pressed
[ 70.240558] dell_wmi: Unknown key with type 0x0011 and code 0xfff3 pressed
Note SW_TABLET_MODE is already reported through the intel_vbtn driver on
this and other Dell devices, so dell_wmi should not report this too,
to avoid duplicate events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On Dell G3-3590, error message is issued during boot up,
"platform::micmute: Setting an LED's brightness failed (-19)",
but there's no micmute led on the machine.
Get the related tokens of SMBIOS, GLOBAL_MIC_MUTE_DISABLE/ENABLE.
If one of two tokens doesn't exist,
don't call led_classdev_register() for platform::micmute.
After that, you wouldn't see the platform::micmute in /sys/class/leds/,
and the error message wouldn't see in dmesg.
Fixes: d00fa46e0a ("platform/x86: dell-laptop: Add micmute LED trigger support")
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It seems next_cmd() predates the strsep() implementation in the kernel.
For a long time we have the latter one, thus, replace next_cmd(&buf) with
strsep(&buf, ",").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Setting the initial state of input-device switches must be done before
registering the input-device.
Otherwise the initial state will get send out as an event as soon
as input_sync() gets called.
E.g. when undocking a tablet using intel-vbtn to report SW_TABLET_MODE
and SW_DOCK before this commit we would get (evemu-record output):
E: 0.000001 0005 0005 0001 # EV_SW / SW_DOCK 1
E: 0.000001 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- +0ms
E: 0.000109 0005 0005 0000 # EV_SW / SW_DOCK 0
E: 0.000109 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- +0ms
E: 0.000133 0005 0001 0001 # EV_SW / SW_TABLET_MODE 1
E: 0.000133 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- +0ms
The first SW_DOCK=1 report is spurious, setting the initial switch
state before registering the input-device fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This is a preparation patch for calling detect_tablet_mode() from
intel_vbtn_input_setup() without needing a forward declaration.
Note this commit makes no functional changes, the moved block of code
is completely unchanged.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On some Asus devices, e.g. the T100TA, when the charger is connected
we not only get a WMI event with code 0x58, but immediately after that
event we also get an even with code 0x79.
This is likely related to these devices having an Asus WMI device with a
device-id of 0x00120066, which seems to provide some sort of charger-type
info. The T100TA charger over a micro-USB connector, the embedded-
controller register read when calling asus_wmi_get_devstate(0x00120066)
returns different values when connected to a USB port (max 500mA charging)
vs when connected to a 2A capable wall-charger. But the AML code reading
this mangles the return value so that we can no longer tell the difference.
So for now the meaning of the value return when getting the status of
device-id 0x00120066 is unclear.
This commit adds a key-mapping of code 0x79 to KE_IGNORE, silencing the
kernel logging the following message every time the charger is plugged-in:
[ 79.639548] asus_wmi: Unknown key 79 pressed
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On Asus 2-in-1s with a detachable keyboard the Asus WMI interface
reports if the tablet is attached to the keyboard or not.
Report if the 2-in-1 is in tablet or clamshell mode to userspace
by reporting SW_TABLET_MODE events to userspace.
This has been tested on a T100TA, T100CHI, T100HA and T200TA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move the asus_wmi_input_init() and asus_wmi_input_exit() functions to
below the WMI helpers, so that further patches in this patch-set can use
the WMI helpers inside asus_wmi_input_init() without needing a forward
declaration.
Note this commit makes no functional changes, the moved block of code
is completely unchanged.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The variable status is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The WMI INIT method on for some reason turns on the camera LED on these
2-in-1s, without the WMI interface allowing further control over the LED.
To fix this commit b5f7311d3a ("platform/x86: asus-nb-wmi: Do not load
on Asus T100TA and T200TA") added a blacklist with these 2 models on it
since the WMI driver did not add any extra functionality to these models.
Recently I've been working on making more 2-in-1 models report their
tablet-mode (SW_TABLET_MODE) to userspace; and I've found that these 2
Asus models report this through WMI. This commit reverts the adding
of the blacklist, so that the Asus WMI driver can be used on these
models to report their tablet-mode.
Note, not calling INIT is also not an option, because then we will not
receive events when the tablet-mode changes. So the LED issue will need
to be fixed somewhere else entirely.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The thermal handle object may fail initialization when the module is
loaded in the first place. Avoid attempting to use it on resume then.
Fixes: 6d232b29cf ("ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator")
Reported-by: Dominik Mierzejewski <dominik@greysector.net>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207491
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
After commit 6d232b29cf ("ACPICA: Dispatcher: always generate buffer
objects for ASL create_field() operator") ACPICA creates buffers even
when new fields are small enough to fit into an integer.
Many SNC calls counted on the old behaviour.
Since sony-laptop already handles the INTEGER/BUFFER case in
sony_nc_buffer_call, switch sony_nc_int_call to use its more generic
function instead.
Fixes: 6d232b29cf ("ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator")
Reported-by: Dominik Mierzejewski <dominik@greysector.net>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207491
Reported-by: William Bader <williambader@hotmail.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1830150
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The framework is unhappy about them, because it uses the names in sysfs
attributes:
power_supply olpc-ac: hwmon: 'olpc-ac' is not a valid name attribute, please fix
power_supply olpc-battery: hwmon: 'olpc-battery' is not a valid name attribute, please fix
See also commit 648cd48c9e ("hwmon: Do not accept invalid name
attributes") and commit 74d3b64197 ("hwmon: Relax name attribute
validation for new APIs").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On some devices the INT33D6 vbtn device is only used to report
tablet-mode / docked status (switches) and there are no vbtn managed
buttons.
On these devices there is no VBDL object.
Move the VBDL check to a intel_vbtn_has_buttons() helper and only exit
from intel_vbtn_probe() with -ENODEV when there are both no buttons and
no switches. Also only report the buttons being present to userspace if
the has_buttons check has succeeded.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops.
Some devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report if they are in tablet mode (keyboard detached) or not,
report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series.
Other devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type.
The Dell Venue 11 Pro 7130 is an example of this.
Extend the DMI chassis-type check to also accept Portables and Detachables
so that the intel-vbtn driver will report SW_TABLET_MODE on these devices.
Note the chassis-type check was originally added to avoid a false-positive
tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge
that laptop is using a chassis-type of 9 / "Laptop", so after this commit
we still ignore the tablet-switch for that chassis-type.
Fixes: de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops (specifically on the
Dell XPS 9360), to avoid e.g. userspace ignoring touchpad events because
userspace thought the device was in tablet-mode.
But if we are not getting the initial status of the switch because the
device does not have a tablet mode, then we really should not advertise
the presence of a tablet-mode switch to userspace at all, as userspace may
use the mere presence of this switch for certain heuristics.
Fixes: de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Split the sparse keymap into 2 separate keymaps, a buttons and a switches
keymap and combine the 2 to a single map again in intel_vbtn_input_setup().
This is a preparation patch for not telling userspace that we have switches
when we do not have them (and for doing the same for the buttons).
Fixes: de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use acpi_evaluate_integer() instead of open-coding it.
This is a preparation patch for adding a intel_vbtn_has_switches()
helper function.
Fixes: de9647efea ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the similar check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the similar check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the very same check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the similar check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the very same check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the very same check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
led_classdev_unregister() already has the very same check, so,
drop a duplicate in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix a resource allocation issue in cros_ec_sensorhub.c.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXrIE1wAKCRBzbaomhzOw
wrteAP4hRbJPMRDIXm5zc5TgqCk7YwgnJDWSjZTRNj0DyMlg9AEA1g9/DHPH20J5
jmd8OZR8c64BQBIM1dNc63F6NkikVg0=
=cd4R
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Benson Leung:
"Fix a resource allocation issue in cros_ec_sensorhub.c"
* tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors
* Avoid loading asus-nb-wmi module on selected laptop models
* Fix S0ix debug support for Jasper Lake PMC
* Few fixes which have been reported by Hulk bot and others
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Do not load on Asus T100TA and T200TA
intel_pmc_core:
- avoid unused-function warnings
- Change Jasper Lake S0ix debug reg map back to ICL
platform/x86/intel-uncore-freq:
- make uncore_root_kobj static
surface3_power:
- Fix a NULL vs IS_ERR() check in probe
thinkpad_acpi:
- Remove always false 'value < 0' statement
wmi:
- Make two functions static
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl6xn8kACgkQb7wzTHR8
rCh18hAAuCiGju0d16WIUCA+wzdsJ2JONMRBTx2wp2HIkR+k1chIDYuVAWAAzRuP
6tyk3/6X0dfD5cAvezQurGZCw9dc0/hN09zyceS1vcbsS3MC0xhGmRkB9TKiBir1
nOLebSjuS+azRQ/y3rvfV7RkGL09gjigNGirxcDsQlQUXeiN6AVyfS7U2mNlnAMs
TZSvOdqaCop0vGplX4c4KAMvxXC9tUxTTveNPxiYJV5PoE3OuGKKQtzznuMyfMuq
P/Fw9YeTilN1NyoG20Qfcy9qHOdWYD729NmSkuU5uQ3qWZ4CJ5phDtQx/3fTz0Xz
m6Mrm3+unyyl5JAjfSl8NCBSjz8WwxPWL72z1U1WE2dr+N7E2HwEL7yp/E59oih8
yQahEy5omOZxWovLnzUvqw4CHaZr085T8ukgF/QwsixClEnhlsJlSnJaa8QakSan
idDUd3KTzxA52jndWSKYM4AkVmGpe1ZLbhxszrOq4YETAesqo+tpzLMuOcdhOxry
EMOAuBcINuBntzMeo9vFX9wpdyVTuCu49CHTESHrAt4LmJ84njVA0sgaouvAEOOe
hpGMNSMU0e37/FTOUgwq6Sb28+XjDPW3BUF9QaukxTZacobKKmwmbj2j7z+44Utj
DMEgC2KCngdPtMBRNj6OtybV0KXWT//BRxgQOV8Pf6Ihn1fcFrw=
=u8gZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Avoid loading asus-nb-wmi module on selected laptop models
- Fix S0ix debug support for Jasper Lake PMC
- Few fixes which have been reported by Hulk bot and others
* tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: thinkpad_acpi: Remove always false 'value < 0' statement
platform/x86: intel_pmc_core: avoid unused-function warnings
platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
platform/x86: intel_pmc_core: Change Jasper Lake S0ix debug reg map back to ICL
platform/x86/intel-uncore-freq: make uncore_root_kobj static
platform/x86: wmi: Make two functions static
platform/x86: surface3_power: Fix a NULL vs IS_ERR() check in probe
There is no need to have comma in terminator line. This will help
to find a potentially broken entries, due to placing after it,
during compilation time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for Vinga Twizzle J116 Silead touchscreen which uses GSL1680 chip.
Signed-off-by: Andrew Dunai <a@dun.ai>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Slim Bootloader(SBL) is a small open-source boot firmware,
designed for running on certain Intel platforms. SBL can be
thought-of as fulfilling the role of a minimal BIOS
implementation, i.e initializing the hardware and booting
Operating System.
Since SBL is not UEFI compliant, firmware update cannot be triggered
using standard UEFI runtime services. Further considering performance
impact, SBL doesn't look for a firmware update image on every reset
and does so only when firmware update signal is asserted.
SBL exposes an ACPI-WMI device which comes up in sysfs as
/sys/bus/wmi/44FADEB1xxx and this driver adds a
"firmware_update_request" device attribute. This attribute normally
has a value of 0 and userspace can signal SBL to update firmware,
on next reboot, by writing a value of 1 like:
echo 1 > /sys/bus/wmi/devices/44FADEB1xxx/firmware_update_request
This driver only implements a signaling mechanism, the actual firmware
update process and various details like firmware update image format,
firmware image location etc are defined by SBL and are not in the
scope of this driver.
DocLink: https://slimbootloader.github.io/security/firmware-update.html
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:
drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~
Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.
The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.
Fixes: aae43c2bcd ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Elkhart Lake exposes SCU/PMC as an ACPI device that only supports
IPC functionality so add a platform driver supporting it. Interrupt is
optional so we let intel_scu_ipc_probe() to decide based on the passed
platform data whether it uses interrupt or polling.
Co-developed-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Co-developed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since 'value' is declared as unsigned long, the following statement is
always false.
value < 0
So let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since 'value' is declared as unsigned long, the following statement is
always false.
value < 0
So let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:
drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~
Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.
The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.
Fixes: aae43c2bcd ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as
Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake
generation. It doesn't use Tiger Lake LPM debug registers. Change the
Jasper Lake S0ix debug interface to use the ICL reg map.
Fixes: 16292bed9c ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support")
Signed-off-by: Archana Patni <archana.patni@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This allows the compiler to verify the format strings vs the types of
the arguments. Also, silence the warning (triggered by W=1):
cros_usbpd_logger.c:55:2: warning: function ‘append_str’ might be a
candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace a comment starting with /** by simply /* to avoid having
it interpreted as a kernel-doc comment.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Merging 5.7 fixes branch as of April 29, containing one fix to branch
destined for chrome-platform-5.8.
b31d1d2b1c platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Allocate callbacks array before enumerating the sensors: The probe routine
for these sensors (for instance cros_ec_sensors_probe) can be called
within the sensorhub probe routine (cros_ec_sensors_probe())
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This adds dual fan control for the following models:
P50, P51, P52, P70, P71, P72, P1 gen1, P2 gen2, X1E gen1 and X1E gen2.
Both fans are controlled together as if they were a single fan.
Tested on an X1 Extreme Gen1, an X1 Extreme Gen2, and a P50.
The patch is defensive, it adds only specific supported machines, and falls
back to the old behavior if both fans cannot be controlled.
Background:
I tested the BIOS default behavior on my X1E gen2 and both fans are always
changed together. So rather than adding controls for each fan, this controls
both fans together as the BIOS would do.
This was inspired by a discussion on dual fan support for the thinkfan tool
(see link below). All BIOS IDs are taken from there. The X1E gen2 ID is
verified on my machine.
Thanks to GitHub users voidworker and civic9 for the earlier patches and
BIOS IDs, and to users peter-stoll and sassman for testing the patch on
their machines.
BugLink: https://github.com/vmatare/thinkfan/issues/58
Signed-off-by: Lars Hofhansl <larsh@apache.org>
[andy: massaged commit message to capitalize ID and convert to BugLink]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.
MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.
The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add new function that allows telemetry modules to get pointer to the
platform specific configuration. This is needed to allow the telemetry
debugfs module to fetch PMC IPC instance in the subsequent patch.
This also allows us to replace telemetry_pltconfig_valid() with
telemetry_get_pltdata() as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The PCI probe driver in intel_pmc_ipc.c is a duplicate of what we
already have in intel_scu_pcidrv.c with the exception that the later also
creates SCU specific devices. Move the PCI IDs from the intel_pmc_ipc.c
to intel_scu.c and use driver_data to detect whether SCU devices need to
be created or not.
Also update Kconfig entry to mention all platforms supported by the
Intel SCU PCI driver and change dependency from X86_INTEL_MID to PCI
which is more generic.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now that all callers have been converted over to the SCU IPC API we can
drop intel_pmc_ipc_command().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Convert the Intel Apollo Lake telemetry driver to use the new SCU IPC
API. This allows us to get rid of the duplicate PMC IPC implementation
which is now covered in SCU IPC driver.
Also move telemetry specific IPC message constant to the telemetry
driver where it belongs.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
SCU IPC is pretty much the same IPC implemented in the intel_pmc_ipc
driver so drop the duplicate implementation and call directly the SCU
IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Drivers such as intel_pmc_ipc.c can be unloaded as well so in order to
support those in this driver add a new function that can be called to
unregister the SCU IPC when it is not needed anymore.
We also add a managed version of the intel_scu_ipc_register() that takes
care of calling intel_scu_ipc_unregister() automatically when the driver
is unbound.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Convert the IPC util to use the new SCU IPC API where the SCU IPC
instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This converts the power button driver to use the new SCU IPC API where
the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current SCU IPC API has been operating on a single instance and
there has been no way to pin the providing module in place when the SCU
IPC is in use.
This implements a new API that takes the SCU IPC instance as first
parameter (NULL means the single instance is being used). The SCU IPC
instance can be retrieved by calling new function intel_scu_ipc_dev_get()
that take care of pinning the providing module in place as long as
intel_scu_ipc_dev_put() is not called.
The old API is updated to call the new API and is is left there in the
legacy API header to support the existing users that cannot be converted
easily.
Subsequent patches will convert most of the users over to the new API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently we only log an error if the command times out which makes it
hard to figure out the failing command. This changes the driver to log
command and subcommand with the error code which should make debugging
easier. This also allows us to simplify the callers as they don't need
to log these errors themselves.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The SCU IPC functionality is usable outside of Intel MID devices. For
example modern Intel CPUs include the same thing but now it is called
PMC (Power Management Controller) instead of SCU. To make the IPC
available for those split the driver into core part (intel_scu_ipc.c)
and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
former before it goes and creates rest of the SCU devices. The SCU IPC
will also register a new class that gets assigned to the device that is
created under the parent PCI device.
We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
IPC library and INTEL_SCU_PCI the SCU driver and convert the users
accordingly. While there remove default y from the INTEL_SCU_PCI symbol
as it is already selected by X86_INTEL_MID.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as
Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake
generation. It doesn't use Tiger Lake LPM debug registers. Change the
Jasper Lake S0ix debug interface to use the ICL reg map.
Fixes: 16292bed9c ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support")
Signed-off-by: Archana Patni <archana.patni@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for the ONDA V891 v5 tablet.
Signed-off-by: Maksim Karasev <karasevm98@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are few parameters that are not described properly.
Fill the gap by describing them properly in kernel doc format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are types and helpers that are redefined with old names.
Convert the WMI library to use those types and helpers directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
cros_typec_add_partner() returns 0 on success, so check for "ret"
instead of "!ret" as an error.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 9d33ea3310 ("platform/chrome: cros_ec_typec: Register port partner")
Signed-off-by: Benson Leung <bleung@chromium.org>
Make RS780E ACPI as a platform driver so we can enable it
by DeviceTree selectively.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Merge branch 'ib-pdx86-properties' of
git://git.infradead.org/linux-platform-drivers-x86.git
to avoid conflicts in PDx86.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix spelling issues over the comments in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Since we have a generic helper, drop custom implementation in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
In one place we open coded set_secondary_fwnode().
Let's replace it with a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Code looks and be read cleaner when software nodes are defined individually.
Convert software node array to a group in order to achieve above.
While here, switch struct initializers to C99 standard.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Fix the following sparse warning:
drivers/platform/x86/intel-uncore-frequency.c:56:16: warning: symbol
'uncore_root_kobj' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for techBite Arc 11.6.
Signed-off-by: Wiktor Ciurej <wiktor.ciurej@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen info for the MP-man MPWIN895CL tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix sparse warnings:
drivers/platform/x86/xiaomi-wmi.c:26:5: warning: symbol 'xiaomi_wmi_probe' was not declared. Should it be static?
drivers/platform/x86/xiaomi-wmi.c:51:6: warning: symbol 'xiaomi_wmi_notify' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The i2c_acpi_new_device() function never returns NULL, it returns error
pointers.
Fixes: b1f81b496b ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Two small fixes for cros_ec_sensorhub_ring.c, addressing issues
introduced in the cros_ec_sensorhub FIFO support commit.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXpdaqAAKCRBzbaomhzOw
wst9AP4+4+F7kAkLcdwG9t2ObWO9VNaPZdlJQ5sSSBPaH6Ai6AD+OihE/4vpkxA4
E70GJ3jTPdi+r20u+GVdf4IeWlu68AQ=
=Vyz7
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fixes from Benson Leung:
"Two small fixes for cros_ec_sensorhub_ring.c, addressing issues
introduced in the cros_ec_sensorhub FIFO support commit"
* tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_sensorhub: Add missing '\n' in log messages
platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()
Register (and unregister) the port partner when a connect (and
disconnect) is detected.
Co-developed-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a separate struct for storing port data, including Type C connector
class struct pointers and caps.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Register a listener for the cros-usbpd-notifier, and update port state
when a notification comes in.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Merging 5.7 fixes branch as of April 13, containing two fixes to branch
destined for chrome-platform-5.8.
538b8471fe platform/chrome: cros_ec_sensorhub: Add missing '\n' in log messages
5b69c23799 platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()
Signed-off-by: Benson Leung <bleung@chromium.org>
Recycle the ISH buffer before notifying of a response or an event. Often
a new message is sent in response to an event and in high traffic
scenarios this can lead to exhausting all available buffers. We can
ensure we are using the fewest buffers possible by freeing buffers as
soon as they are used.
Signed-off-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The ISHTP layer can give us old responses that we already gave up on. We
do not want to interpret these old responses as the current response we
are waiting for.
The cros_ish should only have one request in flight at a time. We send
the request and wait for the response from the ISH. If the ISH is too
slow to respond we give up on that request and we can send a new
request. The ISH may still send the response to the request that timed
out and without this we treat the old response as the response to the
current command. This is a condition that should not normally happen but
it has been observed with a bad ISH image. So add a token to the request
header which is copied into the response header when the ISH processes
the message to ensure that response is for the current request.
Signed-off-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Function 'h1_gpio_get' is receiving 'val' parameter of type u64,
this is being passed to 'send_ec_cmd' as type u8, thus, result
is stored in least significant byte. Due to output format,
the whole 'val' value was being displayed when any of the most
significant bytes are different than zero.
This fix will make sure only least significant byte is displayed
regardless of remaining bytes value.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On x86 ChromiumOS devices, the pmsg_size is set to 0 (check
/sys/module/ramoops/parameters/pmsg_size): this prevents use of
pstore-pmsg, even if CONFIG_PSTORE_PMSG is enabled. Set pmsg_size
to a value that is consistent with the size used on non-x86 ChromiumOS
devices.
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The sensorhub->push_data[] array has sensorhub->sensor_num elements.
It's allocated in cros_ec_sensorhub_ring_add(). So the > should be >=
to prevent a read one element beyond the end of the array.
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cros-usbpd-notify and cros_ec_typec
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ec
* CrOS EC
- Introduce a new cros_ec_cmd_xfer_status helper
* Sensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO support
* Wilco EC
- Fix a build warning.
- Platform data shouldn't include kernel.h
* Misc
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in cros_ec_chardev
and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXo1lfQAKCRBzbaomhzOw
wo6TAQCKHOcrqq5Y9HYXs1QBx8e/0vVwe5Jh76Qi6hUVqXu56QEA65lBZ2ni8Udp
f6jQDFkaeYaF2tkghvuNoAkFRI6/rAk=
=j4Tt
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
cros-usbpd-notify and cros_ec_typec:
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ec
CrOS EC:
- Introduce a new cros_ec_cmd_xfer_status helper
Sensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO support
Wilco EC:
- Fix a build warning.
- Platform data shouldn't include kernel.h
Misc:
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in
cros_ec_chardev and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi
* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
iio: cros_ec: Use Hertz as unit for sampling frequency
iio: cros_ec: Report hwfifo_watermark_max
iio: cros_ec: Expose hwfifo_timeout
iio: cros_ec: Remove pm function
iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
iio: expose iio_device_set_clock
iio: cros_ec: Move function description to .c file
platform/chrome: cros_ec_sensorhub: Add median filter
platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
platform/chrome: cros_ec_sensorhub: Add FIFO support
platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
platform/chrome: chromeos_laptop: make I2C API conversion complete
platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_typec: Update port info from EC
platform/chrome: Add Type C connector class driver
platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
platform/chrome: cros_usbpd_notify: Add driver data struct
...
The use of `delay_usecs` in terminate_request() was replaced with the new
`delay` struct used by the SPI subsystem, however the unit was
set to SPI_DELAY_UNIT_NSECS instead of SPI_DELAY_UNIT_USECS. This fixes that.
Fixes: 7d3ca507fd ("platform/chrome: cros_ec_spi: Use new structure for SPI transfer delays")
Signed-off-by: Benson Leung <bleung@chromium.org>
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore).
* acpiExec namespace init file fixes (Bob Moore).
* Addition of NHLT to the known tables list (Cezary Rojewski).
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda).
* acpiexec cleanup (Erik Kaneda).
* WSMT-related typo fix (Erik Kaneda).
* sprintf() utility function fix (John Levon).
* IVRS IVHD type 11h parsing implementation (Michał Żygowski).
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski).
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai).
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela).
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans
de Goede).
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap).
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang).
-----BEGIN PGP SIGNATURE-----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=b3Dp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
- Fix corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui).
-----BEGIN PGP SIGNATURE-----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=QFDr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
The Power Management Events (PMEs) the INT0002 driver listens for get
signalled by the Power Management Controller (PMC) using the same IRQ
as used for the ACPI SCI.
Since commit fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering, without there being a wakeup
cause recognized by the ACPI sleep code, will no longer wakeup the system.
This breaks PMEs / wakeups signalled to the INT0002 driver, the system
never leaves the s2idle_loop() now.
Use acpi_register_wakeup_handler() to register a function which checks
the GPE0a_STS register for a PME and trigger a wakeup when a PME has
been signalled.
Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tiger Lake's new unique ACPI device IDs for intel-hid driver is not
valid because of missing 'C' in the ID. Fix the ID by updating it.
After the update, the new ID should now look like
INT1051 --> INTC1051
Fixes: bdd11b6540 ("platform/x86: intel-hid: Add Tiger Lake ACPI device ID")
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops.
* On newer ASUS laptops the 1st battery is named differently, here is a fix.
* Fix Lex 2I385SW to allow both network cards to be used.
* The power integrated circuit driver for Surface 3 has been added.
* Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake.
* Clean up of Dell RBU driver.
* Big update for Intel Speed Select technology support tool and driver.
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Support laptops where the first battery is named BATT
- Fix return value of fan_boost_mode_store
dell_rbu:
- Unify format of the printed messages
- Use max_t() to get rid of casting
- Simplify cleanup code in create_packet()
- don't open code list_for_each_entry*()
- Use sysfs_create_group() API
GPD pocket fan:
- Fix error message when temp-limits are out of range
i2c-multi-instantiate:
- Replace zero-length array with flexible-array member
intel-hid:
- Move MODULE_DEVICE_TABLE() closer to the table
intel_pmc_core:
- Make pmc_core_substate_res_show() generic
- Make pmc_core_lpm_display() generic for platforms that support sub-states
- Add slp_s0_offset attribute back to tgl_reg_map
- Remove duplicate 'if' to create debugfs entry
- Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS
- Add debugfs support to access live status registers
- Dump low power status registers on an S0ix.y failure
- Add an additional parameter to pmc_core_lpm_display()
- Remove slp_s0 attributes from tgl_reg_map
- Refactor the driver by removing redundant code
- Add debugfs entry for low power mode status registers
- Add debugfs entry to access sub-state residencies
- Add Atom based Jasper Lake (JSL) platform support
intel-vbtn:
- Move MODULE_DEVICE_TABLE() closer to the table
ISST:
- Fix wrong unregister type
PDx86:
- Kconfig: Fix a typo
- Kconfig: Group modules by companies and functions
- MAINTAINERS: Sort entries in database for PDx86
- Makefile: Group modules by companies and functions
platform/x86/intel-uncore-freq:
- Add release callback
- Fix static checker issue and potential race condition
pmc_atom:
- Add Lex 2I385SW to critclk_systems DMI table
sony-laptop:
- Use scnprintf() for avoiding potential buffer overflow
surface3_power:
- Fix always true condition in mshw0011_space_handler()
- Fix Kconfig section ordering
- Add missed headers
- Reformat GUID assignment
- Drop useless macro ACPI_PTR()
- Prefix POLL_INTERVAL with SURFACE_3
- Simplify mshw0011_adp_psr() to one liner
- Use dev_err() instead of pr_err()
- Drop unused structure definition
- MSHW0011 rev-eng implementation
tools/power/x86/intel-speed-select:
- Fix a typo in error message
- Update version
- Avoid duplicate Package strings for json
- Add display for enabled cpus count
- Print friendly warning for bad command line
- Fix avx options for turbo-freq feature
- Improve CLX commands
- Show error for invalid CPUs in the options
- Improve core-power result and error display
- Kernel interface error handling
- Improve error display for turbo-freq feature
- Improve error display for base-freq feature
- Improve output of perf-profile commands
- Enhance help for core-power assoc
- Display error for invalid priority type
- Check feature status first
- Improve error display for perf-profile feature
- Add an API for error/information print
- Enhance --info option
- Enhance help
- Helpful warning for missing kernel interface
- Store topology information
- Max CPU count calculation when CPU0 is offline
- Special handling for CPU 0 online/offline
- Use more verbiage for clos information
- Enhance core-power info command
- Make target CPU optional for core-power info
- Warn for invalid package id
- Fix last cpu number
- Fix mailbox usage for CLOS_PM_QOS_CONFIG
- Avoid duplicate names for json parsing
- Fix display for turbo-freq auto mode
-----BEGIN PGP SIGNATURE-----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=G0jF
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Fix for improper handling of fan_boost_mode in sysfs for ASUS
laptops.
- On newer ASUS laptops the 1st battery is named differently, here is a
fix.
- Fix Lex 2I385SW to allow both network cards to be used.
- The power integrated circuit driver for Surface 3 has been added.
- Refactor and clean up of Intel PMC driver and enable it on Intel
Jasper Lake.
- Clean up of Dell RBU driver.
- Big update for Intel Speed Select technology support tool and driver.
* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
platform/x86: surface3_power: Fix Kconfig section ordering
platform/x86: surface3_power: Add missed headers
platform/x86: surface3_power: Reformat GUID assignment
platform/x86: surface3_power: Drop useless macro ACPI_PTR()
platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
platform/x86: surface3_power: Use dev_err() instead of pr_err()
platform/x86: surface3_power: Drop unused structure definition
platform/x86: surface3_power: MSHW0011 rev-eng implementation
platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
tools/power/x86/intel-speed-select: Fix a typo in error message
tools/power/x86/intel-speed-select: Update version
tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
tools/power/x86/intel-speed-select: Add display for enabled cpus count
tools/power/x86/intel-speed-select: Print friendly warning for bad command line
tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
tools/power/x86/intel-speed-select: Improve CLX commands
tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
Events are timestamped in EC time space, their timestamps need to be
converted in host time space.
The assumption is the time delta between when the interrupt is sent
by the EC and when it is receive by the host is a [small] constant.
This is not always true, even with hard-wired interrupt. To mitigate
worst offenders, add a median filter to weed out bigger than expected
delays.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_ec_sensorhub registers a listener and query motion sense FIFO,
spread to iio sensors registers.
To test, we can use libiio:
iiod&
iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To better manage resources, store the number of sensors reported by
the EC.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Kconfig section is misplaced. Put it in the same order as it is done
in Makefile for this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better readability reformat GUID assignment.
While here, add the comment how this GUID looks in a string representation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Driver depends to ACPI, this marco always is evaluated to the parameter,
thus useless. Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As reported by kbuild bot the struct mshw0011_lookup in never used.
Drop its definition for good.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When converting to i2c_new_scanned_device(), it was overlooked that a
conversion to i2c_new_client_device() was also needed. Fix it.
Fixes: c82ebf1bf7 ("platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Patch was rebased on top of for-next. Thanks for your patience!
Blaž
I'm resubmitting this patch with review feedback addressed:
https://patchwork.kernel.org/patch/10584079/
The patch was previously not resubmitted because it required a change
that was reverted in the ACPICA. That has since been corrected:
9159c09a2a
We've been using this patch for a while and user reports confirm that it
works:
https://github.com/linux-surface/linux-surface
Previous description follows.
>8------------------------------------------------------8<
The MSHW0011 device is a chip that replaces the battery firmware
by using ACPI operation regions on the Surface 3.
It is unclear whether or not the chip will be reused somewhere else
(under Windows, the chip is called "Surface Platform Power Driver"
and the driver is provided by Microsoft).
The values have been obtained by reverse engineering, and are subject to
errors. Looks like it works on overall pretty well.
I couldn't manage to get the IRQ correctly triggered, so I am using a
good old polling thread to check for changes. This is something
to be fixed in a later version.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106231
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Stephen Just <stephenjust@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of the local macro wrappers for consistency.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.766573641@linutronix.de
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
After registering the ports at probe, get the current port information
from EC and update the Type C connector class ports accordingly.
Co-developed-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a driver to implement the Type C connector class for Chrome OS
devices with ECs (Embedded Controllers).
The driver relies on firmware device specifications for various port
attributes. On ACPI platforms, this is specified using the logical
device with HID GOOG0014. On DT platforms, this is specified using the
DT node with compatible string "google,cros-ec-typec".
The driver reads the device FW node and uses the port attributes to
register the typec ports with the Type C connector class framework, but
doesn't do much else.
Subsequent patches will add more functionality to the driver, including
obtaining current port information (polarity, vconn role, current power
role etc.) after querying the EC.
Co-developed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In order to avoid future header hell, remove the inclusion of
proc_fs.h from acpi_bus.h. All it needs is a forward declaration of a
struct.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20200321113241.246190285@linutronix.de
Add touchscreen info for the Chuwi Vi8 Plus tablet. This tablet uses a
Chipone ICN8505 touchscreen controller, with the firmware used by the
touchscreen embedded in the EFI firmware.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-11-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sofar we have been unable to get permission from the vendors to put the
firmware for touchscreens listed in touchscreen_dmi in linux-firmware.
Some of the tablets with such a touchscreen have a touchscreen driver, and
thus a copy of the firmware, as part of their EFI code.
This commit adds the necessary info for the new EFI embedded-firmware code
to extract these firmwares, making the touchscreen work OOTB without the
user needing to manually add the firmware.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-10-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently pmc_core_substate_res_show() uses array of char pointers
i.e., lpm_modes for Tiger Lake directly to iterate through and to get
the number of low power modes which is hardcoded and cannot be re-used
for future platforms that support sub-states. To maintain readability,
make pmc_core_substate_res_show() generic, so that it can re-used for
future platforms.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently pmc_core_lpm_display() uses an array of the struct pointers,
i.e. tgl_lpm_maps for Tiger Lake directly to iterate through and to get
the number of (live) status registers which is hard coded and can not
be re-used for the future platforms that support sub-states. To maintain
readability, make pmc_core_lpm_display() generic, so that it can be re-used
for future platforms.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 1f27dbd826 ("platform/x86: GPD pocket fan: Allow somewhat
lower/higher temperature limits") changed the module-param sanity check
to accept temperature limits between 20 and 90 degrees celcius.
But the error message printed when the module params are outside this
range was not updated. This commit updates the error message to match
the new min and max value for the temp-limits.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The MMIO driver is not unregistering with the correct type with the ISST
common core during module removal. This should be unregistered with
ISST_IF_DEV_MMIO instead of ISST_IF_DEV_MBOX.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Function fan_boost_mode_store returns 0 if store is successful,
this leads to infinite loop after any write to it's sysfs entry:
# echo 0 >/sys/devices/platform/asus-nb-wmi/fan_boost_mode
This command never ends, one CPU core is at 100% utilization.
This patch fixes this by returning size of written data.
Fixes: b096f626a6 ("platform/x86: asus-wmi: Switch fan boost mode")
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The WMI method to set the charge threshold does not provide a
way to specific a battery, so we assume it is the first/primary
battery (by checking if the name is BAT0).
On some newer ASUS laptops (Zenbook UM431DA) though, the
primary/first battery isn't named BAT0 but BATT, so we need
to support that case.
Fixes: 7973353e92 ("platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API")
Cc: stable@vger.kernel.org
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Read the PD host even status from the EC and send that to the notifier
listeners, for more fine-grained event information.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Convert the ACPI driver into the equivalent platform driver, with the
same ACPI match table as before. This allows the device driver to access
the parent platform EC device and its cros_ec_device struct, which will
be required to communicate with the EC to pull PD Host event information
from it.
Also change the ACPI driver name to "cros-usbpd-notify-acpi" so that
there is no confusion between it and the "regular" platform driver on
platforms that have both CONFIG_ACPI and CONFIG_OF enabled.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Introduce a device driver data structure, cros_usbpd_notify_data, in
which we can store the notifier block object and pointers to the struct
cros_ec_device and struct device objects.
This will make it more convenient to access these pointers when
executing both platform and ACPI callbacks.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
cros-usbpd-notify notifier was returning NOTIFY_BAD when no host event
was available in the MKBP message.
But MKBP messages are used to transmit other information, so return
NOTIFY_DONE instead, to allow other notifier to be called.
Fixes: ec2daf6e33 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Remove the CONFIG_ prefix from the select statement for MFD_CROS_EC.
Fixes: 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). It allows us to remove some redundand code. In this
case, though, we are changing a bit the behaviour because of returning
-EINVAL on protocol error we propagate the error return for
cros_ec_cmd_xfer_status() function, but I think it will be fine, even
more clear as we don't mask the Linux error code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Looking at the code I am even unsure that makes sense differentiate
these two errors but let's not change the behaviour for now.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
In practice most drivers that use the EC protocol what really care is if
the result was successful or not, hence, we introduced a
cros_ec_cmd_xfer_status() function that converts EC errors to standard
Linux error codes. On some few cases, though, we are interested on know
if the command is supported or not, and in such cases, just ignore the
error. To achieve this, return a -ENOTSUPP error when the command is not
supported.
This will allow us to finish the conversion of all users to use the
cros_ec_cmd_xfer_status() function instead of cros_ec_cmd_xfer() and
make the latest private to the protocol driver, so users of the protocol
are not confused in which function they should use.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Host event can be sent by remoteproc by any time, and
cros_ec_rpmsg_callback would be called after cros_ec_rpmsg_create_ept.
But the cros_ec_device is initialized after that, which cause host event
handler to use cros_ec_device that are not initialized properly yet.
Fix this by don't schedule host event handler before cros_ec_register
returns. Instead, remember that we have a pending host event, and
schedule host event handler after cros_ec_register.
Fixes: 71cddb7097 ("platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
'paramaters' should be 'parameters'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On module unload wait for relese callback for each packag_die entry
and then free the memory. This is done by waiting on a completion
object, till release() callback.
While here, also change to kobject_init_and_add() to
kobject_create_and_add() to simplify.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is a possible race condition when:
All CPUs in a package is offlined and just before the last CPU offline,
user tries to read sysfs entry and read happens while offline callback
is about to delete the sysfs entry.
Although not reproduced but this is possible scenerio and can be
reproduced by adding a msleep() in the show_min_max_freq_khz() before
mutex_lock() and read min_freq attribute from user space. Before
msleep() finishes, force every CPUs in a package offline.
This will cause deadlock, with offline and sysfs read/write operation
because of mutex_lock. The uncore_remove_die_entry() will not release
mutex till read/write callback returns because of kobject_put() and
read/write callback waiting on mutex.
We don't have to remove the sysfs folder when the package is offline.
While there is no CPU present, we can fail the read/write calls by
returning ENXIO error. So remove the kobject_put() call in offline path.
This also address the warning from static checker, as there is no
access to "data" variable after kobject_put:
"The patch 49a474c7ba: "platform/x86: Add support for Uncore
frequency control" from Jan 13, 2020, leads to the following static
checker warning:
drivers/platform/x86/intel-uncore-frequency.c:285 uncore_remove_die_entry()
error: dereferencing freed memory 'data'
"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If platforms such as Tiger Lake has sub-states of S0ix, then attributes
such as slps0_dbg_offset become invalid. But slp_s0_offset is still
valid as it is used to get the pmcdev_base_addr.
Hence, add back slp_s0_offset and remove slps0_dbg_offset attributes.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
A debugfs entry for substate_live_status_registers is created only if
the platform has sub-states, which requires the same condition to create
substate_status_registers debugfs entry. Hence remove the redundant
condition and re-use the existing one.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pmc_core_slps0_display() and pmc_core_lpm_display() is responsible for
dumping as well as displaying debug registers, there is no need for these
two functions to be defined under CONFIG_DEBUG_FS.
Hence, relocate these functions from under CONFIG_DEBUG_FS to above the block.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Just like status registers, Tiger Lake has another set of 6 registers
that help with status of the low power mode requirements. They are
latched on every PC10 entry/exit and S0ix.y entry/exit as well.
Though status and live status registers show the status of same list
of requirements, live status registers show the status of the low power
mode requirements at the time of reading.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Platforms prior to Tiger Lake has no sub-states of S0ix and accessing
device PM states that are latched whenever there is a PC10 entry is
possible with the help of slp_s0_debug_status and slp_s0_dbg_latch
debugfs entries.
If a platform has sub-states of S0ix, no such entries are created.
Hence, dump low power status registers on resume When any attempt to
enter any low power state was unsuccessful.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
RO and RW of EC may have different EC protocol version. If EC transitions
between RO and RW, but AP does not reboot (this is true for fingerprint
microcontroller / cros_fp, but not true for main ec / cros_ec), the AP
still uses the protocol version queried before transition, which can
cause problems. In the case of fingerprint microcontroller, this causes
AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the
interrupt handler, which in turn prevents RO to clear the interrupt
line to AP, in an infinite loop.
Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there
might have been a transition between RO and RW, so re-query the protocol.
Signed-off-by: Yicheng Li <yichengli@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Replace with appropriate types.h.
Also there is no need to include device.h, but mutex.h.
For the pointers to unknown structures use forward declarations.
In the *.c files we need to include all headers that provide APIs
being used in the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Merge 0cbb4f9c69 ("platform/chrome: wilco_ec: Include asm/unaligned instead of
linux/ path") from chrome-platform-5.6-fixes into for-next destined branch.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
It seems that we shouldn't try to include the include/linux/ path to
unaligned functions. Just include asm/unaligned.h instead so that we
don't run into compilation warnings like below.
In file included from drivers/platform/chrome/wilco_ec/properties.c:8:0:
include/linux/unaligned/le_memmove.h:7:19: error: redefinition of 'get_unaligned_le16'
static inline u16 get_unaligned_le16(const void *p)
^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5:0,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:68,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/device.h:16,
from include/linux/platform_data/wilco-ec.h:11,
from drivers/platform/chrome/wilco_ec/properties.c:6:
include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here
static inline u16 get_unaligned_le16(const void *p)
^~~~~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 60fb8a8e93 ("platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
ChromiumOS uses ACPI device with HID "GOOG0003" for power delivery
related events. The existing cros-usbpd-charger driver relies on these
events without ever actually receiving them on ACPI platforms. This is
because in the ChromeOS kernel trees, the GOOG0003 device is owned by an
ACPI driver that offers firmware updates to USB-C chargers.
Introduce a new platform driver under cros-ec, the ChromeOS embedded
controller, that handles these PD events and dispatches them
appropriately over a notifier chain to all drivers that use them.
On platforms that don't have the ACPI device defined, the driver gets
instantiated for ECs which support the EC_FEATURE_USB_PD feature bit,
and the notification events will get delivered using the MKBP event
handling mechanism.
Co-Developed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-By: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a device pointer of type struct device as an additional parameter to
pmc_core_lpm_display(), so that the driver can re-use it to dump the
debug registers in resume for an S0ix failure.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If platforms such as Tiger Lake has sub-states of S0ix, then both
slp_s0_debug_status and slp_s0_dbg_latch entries become invalid. Thus,
remove slp_s0_offset and slp_s0_dbg_maps attributes from tgl_reg_map, so
that both the entries are not created.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
pmc_core_slps0_dbg_show() is responsible for displaying debug registers
through slp_s0_debug_status entry. The driver uses the same but
redundant code to dump these debug registers for an S0ix failure.
Hence, refactor the driver by removing redundant code and reuse the
same function that both dumps registers through slp_s0_debug_status
entry and in resume for an S0ix failure.
The changes in this patch are preparatory, so platforms that support low
power sub-states can dump the debug registers when the attempt to enter
low power states are unsuccessful.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tiger Lake has 6 status registers that are memory mapped. These
registers show the status of the low power mode requirements. The
registers are latched on every C10 entry or exit and on every s0ix.y
entry/exit. Accessing these registers is useful for debugging any low
power related activities.
Thus, add debugfs entry to access low power mode status registers.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Prior to Tiger Lake, the platforms that support pmc_core have no
sub-states of S0ix. Tiger Lake has 8 sub-states/low power modes of S0ix
ranging from S0i2.0-S0i2.2 and S0i3.0-S0i3.4, simply represented as
S0ix.y.
Create a debugfs entry to access residency of each sub-state.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Lex 2I385SW board has two Intel I211 ethernet controllers. Without
this patch, only the first port is usable. The second port fails to
start with the following message:
igb: probe of 0000:02:00.0 failed with error -2
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Here we do:
- unify all message to have module name prefix via pr_fmt()
- replace printk(LEVEL ... ) with pr_level(...)
- drop __func__ from messages
- join string literals to be on one line
- drop trailing periods and spaces
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The loop declaration in packet_read_list() and packet_empty_list()
can be simplified by reusing the common list_for_each_entry*()
helper macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better maintenance group modules by companies and functions.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better maintenance group modules by companies and functions.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add Jasper Lake to the list of the platforms that intel_pmc_core
driver supports for pmc_core device.
Just like Ice Lake, Tiger Lake and Elkhart Lake, Jasper Lake can also
reuse all the Cannon Lake PCH IPs. Also, it uses the same PCH IPs of
Tiger Lake, no additional effort is needed to enable but to simply reuse
them.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
* CrOS EC
- Refactoring of some of cros_ec's headers. include/linux/mfd/cros_ec.h now
removed, new cros_ec.h added drivers/platform/chrome which contains shared
operations of cros_ec transport drivers.
- Response tracing in cros_ec_proto
* Wilco EC
- Fix unregistration order.
- Fix keyboard backlight probing on systems without keyboard backlight
- Minor cleanup (newlines in printks, COMPILE_TEST)
* Misc
- chromeos_laptop converted to use i2c_new_scanned_device instead of
i2c_new_probed_device
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXjij4AAKCRBzbaomhzOw
wrFjAP0bU5PFkxprCOTY9kF/cMgHPDljEPES4FVV11eGyYr3HgD/StpuIhFGrh7+
Fz96dDdNu1melyGjmMqSN/M9JFo+Hw4=
=FB/I
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"CrOS EC:
- Refactoring of some of cros_ec's headers:
include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to
drivers/platform/chrome which contains shared operations of cros_ec
transport drivers.
- Response tracing in cros_ec_proto
Wilco EC:
- Fix unregistration order.
- Fix keyboard backlight probing on systems without keyboard
backlight
- Minor cleanup (newlines in printks, COMPILE_TEST)
Misc:
- chromeos_laptop converted to use i2c_new_scanned_device instead of
i2c_new_probed_device"
* tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Match implementation with headers
platform/chrome: cros_ec: Drop unaligned.h include
platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST
platform/chrome: wilco_ec: Add newlines to printks
platform/chrome: wilco_ec: Fix unregistration order
cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
platform/chrome: cros_ec_ishtp: Make init_lock static
platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device
platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs
platform/chrome: cros_ec_proto: Add response tracing
platform/chrome: cros_ec_trace: Match trace commands with EC commands
The 'cros_ec' core driver is the common interface for the cros_ec
transport drivers to do the shared operations to register, unregister,
suspend, resume and handle_event. The interface is provided by including
the header 'include/linux/platform_data/cros_ec_proto.h', however, instead
of have the implementation of these functions in cros_ec_proto.c, it is in
'cros_ec.c', which is a different kernel module. Apart from being a bad
practice, this can induce confusions allowing the users of the cros_ec
protocol to call these functions.
The register, unregister, suspend, resume and handle_event functions
*should* only be called by the different transport drivers (i2c, spi, lpc,
etc.), so make this a bit less confusing by moving these functions from
the public in-kernel space to a private include in platform/chrome, and
then, the interface for cros_ec module and for the cros_ec_proto module is
clean.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This switches the intel_menlow driver to use deci_kelvin_to_celsius()
and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
This also removes a trailing space, while we're at it.
Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for
DECI_KELVIN_TO_CELSIUS() is a bit odd.
This switches the asus-wmi driver to use deci_kelvin_to_millicelsius()
in <linux/units.h>.
The format string is changed from %d to %ld due to function returned
type.
Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to provide a clearer, more symmetric API for pinning and
unpinning DMA pages. This way, pin_user_pages*() calls match up with
unpin_user_pages*() calls, and the API is a lot closer to being
self-explanatory.
Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. Call the new global pin_user_pages_fast(), from
pin_goldfish_pages().
2. As required by pin_user_pages(), release these pages via
put_user_page(). In this case, do so via put_user_pages_dirty_lock().
That has the side effect of calling set_page_dirty_lock(), instead of
set_page_dirty(). This is probably more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
Another side effect is that the release code is simplified because the
page[] loop is now in gup.c instead of here, so just delete the local
release_user_pages() entirely, and call put_user_pages_dirty_lock()
directly, instead.
[1] https://lore.kernel.org/r/20190723153640.GB720@lst.de
Link: http://lkml.kernel.org/r/20200107224558.2362728-13-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid naming conflicts: rename local static function from
"pin_user_pages()" to "goldfish_pin_pages()".
An upcoming patch will introduce a global pin_user_pages() function.
Link: http://lkml.kernel.org/r/20200107224558.2362728-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Add support for reference properties in sofrware nodes (Dmitry
Torokhov) and a basic test for property entries along with fixes
on top of it (Dmitry Torokhov, Qian Cai, Alan Maguire).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u21kSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxpFQP/j/TYgzdC3PVWDTzbjOC2W8UStAfjG9M
DMdCM6vnAmtS+npuO1/4hx4SM8OXVrJSbccpUik1LatfWhKftpAznNssDnnqV475
ldUdObEHf7g/K6rGkbzELU5SknqHSGs+Gk9PfgV6ahjKy9jgq3jSaSkazVho2OwS
nIWWnRXeyvJ8TZr+0WjhZGgrLxl1XvDJfqrcckbjluiCx0sxIDfMdq3xgavvvt4J
qbm/8LFr46WR2fb+78EjaCwfLKZ3i8vLJDLDEf5A6UW3o9h9Xyk0avXB5ECqElrf
AYqH5GkWThePwHZsezCVyh0MTu6C4TlEOaLFLVuAh3lLEZZ6dmHwpLeqotVhIIQG
nERXyJNvAJ2PShJQExX67XMhaCvzX8897vMsMQgWTzBztt5aLx4JiMu+pKoxt+I8
FvyHOhiwFP4pEp6OuJX9oxV8fVTPKU3jaLprZfce41+33yQP+jHg5zeLgpsgvvKY
SmnxuG3I8R9yXN/AETikerddQwQxw/cc4B9va17XsaEtf6SBEzJPIqbo9cAT6AZs
+vSr4uEHBB0Wlyrlo75XEKRfCs2f67r1IWr7pfACrHadiSowNNGEFan+tPIIelLU
n8wgKfIEYyrjyLppZsMWGQLOkzshNZHqdPQUWpb6ywJ1qUWriZXSlh2jviex9G2m
3wrYBGL5M+o6
=wnoj
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Add support for reference properties in sofrware nodes (Dmitry
Torokhov) and a basic test for property entries along with fixes on
top of it (Dmitry Torokhov, Qian Cai, Alan Maguire)"
* tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: introduce CONFIG_KUNIT_DRIVER_PE_TEST
usb: dwc3: use proper initializers for property entries
drivers/base/test: fix global-out-of-bounds error
software node: add basic tests for property entries
software node: remove separate handling of references
platform/x86: intel_cht_int33fe: use inline reference properties
software node: implement reference properties
software node: allow embedding of small arrays into property_entry
software node: replace is_array with is_inline
- Update the ACPICA code in the kernel to upstream revision
20200110 including:
* Update of copyright notices to 2020 (Bob Moore).
* Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
* Debugger cleanup (Colin Ian King).
* Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
* UNIX line ending support for non-windows builds in acpisrc
(Erik Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
to the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao).
-----BEGIN PGP SIGNATURE-----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=qOut
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision (20200110), add new hardware support to a handful of ACPI
drivers, make the ACPI fan driver expose power states information for
fans, add some more quirks, fix bugs and clean up assorted things.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200110
including:
- Update of copyright notices to 2020 (Bob Moore).
- Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
- Debugger cleanup (Colin Ian King).
- Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
- UNIX line ending support for non-windows builds in acpisrc (Erik
Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao)"
* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPICA: Update version to 20200110
ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
apei/ghes: Do not delay GHES polling
ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
ACPI: PPTT: Consistently use unsigned int as parameter type
ACPI: EC: Reference count query handlers under lock
ACPICA: Update the list of maintainers
ACPICA: Update version to 20191213
ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
ACPICA: acpisrc: add unix line ending support for non-windows build
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
ACPICA: debugger: fix spelling mistake "adress" -> "address"
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
platform/x86: intel-hid: Add Tiger Lake ACPI device ID
ACPI: fan: Add Tiger Lake ACPI device ID
ACPI: DPTF: Add Tiger Lake ACPI device IDs
ACPI: fan: Expose fan performance state information
tools/power/acpi: fix compilation error
...
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
* Support left round button on ASUS N56VB
* Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
* Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
* Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
* Touchscreen support for the PiPO W11 tablet
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Support left round button on N56VB
asus-wmi:
- Fix keyboard brightness cannot be set to 0
- Set throttle thermal policy to default
- Support throttle thermal policy
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
- Style changes
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel_atomisp2_pm:
- Spelling fixes
- Refactor timeout loop
intel_mid_powerbtn:
- Take a copy of ddata
intel_pmc_core:
- update Comet Lake platform driver
- Fix spelling of MHz unit
- Fix indentation in function definitions
- Put more stuff under #ifdef DEBUG_FS
- Respect error code of kstrtou32_from_user()
- Add Intel Elkhart Lake support
- Add Intel Tiger Lake support
- Make debugfs entry for pch_ip_power_gating_status conditional
- Create platform dependent bitmap structs
- Remove unnecessary assignments
- Clean up: Remove comma after the termination line
intel_pmc_ipc:
- Switch to use driver->dev_groups
- Propagate error from kstrtoul()
- Use octal permissions in sysfs attributes
- Get rid of unnecessary includes
- Drop ipc_data_readb()
- Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
- Make intel_pmc_ipc_raw_cmd() static
- Make intel_pmc_ipc_simple_command() static
- Make intel_pmc_gcr_update() static
intel_scu_ipc:
- Reformat kernel-doc comments of exported functions
- Drop intel_scu_ipc_raw_command()
- Drop intel_scu_ipc_io[read|write][8|16]()
- Drop unused macros
- Drop unused prototype intel_scu_ipc_fw_update()
- Sleeping is fine when polling
- Drop intel_scu_ipc_i2c_cntrl()
- Remove Lincroft support
- Add constants for register offsets
- Fix interrupt support
intel_scu_ipcutil:
- Remove default y from Kconfig
intel_telemetry_debugfs:
- Respect error code of kstrtou32_from_user()
intel_telemetry_pltdrv:
- use devm_platform_ioremap_resource()
mlx-platform:
- Add support for next generation systems
- Add support for new capability register
- Add support for new system type
- Set system mux configuration based on system type
- Add more definitions for system attributes
- Cosmetic changes
platform/mellanox:
- mlxreg-hotplug: Add support for new capability register
- fix potential deadlock in the tmfifo driver
tools/power/x86/intel-speed-select:
- Update version
- Change the order for clos disable
- Fix result display for turbo-freq auto mode
- Add support for core-power discovery
- Allow additional core-power mailbox commands
- Update MAINTAINERS for the intel uncore frequency control
- Add support for Uncore frequency control
touchscreen_dmi:
- Fix indentation in several places
- Add info for the PiPO W11 tablet
-----BEGIN PGP SIGNATURE-----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=rMop
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Enable thermal policy for ASUS TUF FX705DY/FX505DY
- Support left round button on ASUS N56VB
- Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
- Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
driver
- Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers
- Touchscreen support for the PiPO W11 tablet
* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
platform/x86: intel_scu_ipc: Drop unused macros
platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
platform/x86: intel_scu_ipc: Sleeping is fine when polling
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
platform/x86: intel_scu_ipc: Remove Lincroft support
platform/x86: intel_scu_ipc: Add constants for register offsets
platform/x86: intel_scu_ipc: Fix interrupt support
platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
...
* acpi-battery:
ACPI / battery: Deal better with neither design nor full capacity not being reported
ACPI / battery: Use design-cap for capacity calculations if full-cap is not available
ACPI / battery: Deal with design or full capacity being reported as -1
* acpi-video:
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
ACPI: video: Use native backlight on Lenovo E41-25/45
ACPI: video: fix typo in comment
* acpi-fan:
ACPI: fan: Expose fan performance state information
* acpi-drivers:
thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
platform/x86: intel-hid: Add Tiger Lake ACPI device ID
ACPI: fan: Add Tiger Lake ACPI device ID
ACPI: DPTF: Add Tiger Lake ACPI device IDs
The driver core provides support for adding additional attributes for
devices via new ->dev_groups member of struct device_driver. Convert the
driver to use that instead of adding the attributes manually.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
kstrtoul() already returns negative error if the input was not valid so
return it directly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This is the current preferred way so replace the S_IWUSR with the
corresponding octal value. While there move the attributes to follow
directly their store functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no point including headers that are not needed in the driver so
drop them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not used anywhere so drop it completely.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
These functions are not used anywhere so drop them completely.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Format kernel-doc comments of the exported functions to follow the
typical format that does not have tab indentation. Also capitalize
parameter descriptions and add a missing period.
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no user for this function so we can drop it from the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no users for these so we can remove them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
These macros are not used anywhere in the driver so drop them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
