To support P2P in driver, we set P2P interface mode to the wiphy
allocated for 802.11 PHY and add a change interface function to
switch the interface type to P2P.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922010435.12167-2-pkshih@realtek.com
Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Add RXIQ calibration found in mtk driver. With old openwrt builds this
gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
Move bbp_ready and rf_ready busy wait functions up in the code so they
can more easily be used. Allow specifying register mask in rf_ready
function which is useful for calibration routines which will be added
in follow-up commits.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org
Implement support for external PA connected to MT7620A.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
[pozega.tomislav@gmail.com: use chanreg and dccal helpers.]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Tested-by: Christoph Krapp <achterin@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org
Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592
PCIe radio (a single chip 2T2R 802.11abgn solution).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d7eccb2c7b8ec4cd360fa2007796abffc35abb0d.1663445157.git.daniel@makrotopia.org
Since we maintain coexistence as shared code, so move coexistence version
from chip specific attribute to a definition.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-10-pkshih@realtek.com
Add control logic to operate Wi-Fi to BT scoreboard to control BT scan
priority. And patch mechanism parameter to enhance Wi-Fi throughput while
coexisting with BT profile & BT scan. Set PTA priority let Wi-Fi BT can RX
at the same time.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-9-pkshih@realtek.com
If Wi-Fi driver send Wi-Fi status to BT via scoreboard too frequent in a
short moment, BT will loss some of them because of hardware response time.
To avoid this issue, change the code flow. Summarize the scoreboard changes
and if the value have changed, send the scoreboard to BT only once in
a coexistence processing cycle. It also can help to reduce driver I/O.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-8-pkshih@realtek.com
To prevent LNA2 change its gain during a Wi-Fi aggregation packet while
GNT_BT pull high. Otherwise, changes of this gain will destroy the whole
aggregation when Wi-Fi RX.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-7-pkshih@realtek.com
WiFi/BT combo module could only have two antenna, namely WL_S0 and WL_S1.
WiFi can use two antenna to TX/RX 2SS data, and BT can share one of the
antenna. This patch is to allow WiFi to TX/RX 1SS data like ACK/RTS/CTS to
improve Wi-Fi performance while coexisting with Bluetooth.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-6-pkshih@realtek.com
This report is to record firmware call flow like notify events, and take
actions. This can help to address if firmware flow is in expectation.
Implement v1 parser to support 8852CE firmware report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-5-pkshih@realtek.com
This debug entry is to summarize important messages to quickly address
problem types, such as firmware hang, C2H/H2C stuck, or too much
occupation of BT A2DP. If unexpected something is addressed, we can dig
the problem via other debug messages that provide more detail information.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-4-pkshih@realtek.com
To analyze debug log quickly, use readable name in string format instead.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-3-pkshih@realtek.com
'cysta' is short for statistics for cycles. That is a circular buffer to
record snapshot status including beacon count, RX count, TX count etc.
Since 8852CE Wi-Fi firmware report this statistics in different format,
add v1 parser by this patch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220920010939.12173-2-pkshih@realtek.com
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
(Interrupt context)
fw_dump_timer_fn
mwifiex_upload_device_dump
dev_coredumpv(..., GFP_KERNEL)
dev_coredumpm()
kzalloc(sizeof(*devcd), gfp); //may sleep
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
The corresponding fail log is shown below:
[ 135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
...
[ 135.293613] Call Trace:
[ 135.293613] <IRQ>
[ 135.293613] dump_stack_lvl+0x57/0x7d
[ 135.293613] __might_resched.cold+0x138/0x173
[ 135.293613] ? dev_coredumpm+0xca/0x2e0
[ 135.293613] kmem_cache_alloc_trace+0x189/0x1f0
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] dev_coredumpm+0xca/0x2e0
[ 135.293613] ? devcd_freev+0x10/0x10
[ 135.293613] dev_coredumpv+0x1c/0x20
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] mwifiex_upload_device_dump+0x65/0xb0
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] call_timer_fn+0x122/0x3d0
[ 135.293613] ? msleep_interruptible+0xb0/0xb0
[ 135.293613] ? lock_downgrade+0x3c0/0x3c0
[ 135.293613] ? __next_timer_interrupt+0x13c/0x160
[ 135.293613] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] __run_timers.part.0+0x3f8/0x540
[ 135.293613] ? call_timer_fn+0x3d0/0x3d0
[ 135.293613] ? arch_restore_msi_irqs+0x10/0x10
[ 135.293613] ? lapic_next_event+0x31/0x40
[ 135.293613] run_timer_softirq+0x4f/0xb0
[ 135.293613] __do_softirq+0x1c2/0x651
...
[ 135.293613] RIP: 0010:default_idle+0xb/0x10
[ 135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246
[ 135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1
[ 135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20
[ 135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b
[ 135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410
[ 135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2
...
[ 135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
As we can see, there is no bug now.
Fixes: f5ecd02a8b ("mwifiex: device dump support for usb interface")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5cfa5c473ff6d069cb67760ffa04a2f84ef450a8.1661252818.git.duoming@zju.edu.cn
If request_partial_firmware_into_buf() fails then "firmware" is not
initialized and the release_firmware(firmware) will crash.
Fixes: deebea35d6 ("wifi: rtw89: early recognize FW feature to decide if chanctx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YyMzDtX/3fUBnonC@kili
Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
is seeing tx skbs submitted to it with the queue-id set to 2 / set to
IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
This causes rt2x00queue_get_tx_queue() to return NULL and the following
error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
send packet over invalid queue 2", after which association with the AP
fails.
This patch works around this by mapping QID_AC_BE and QID_AC_BK
to QID_AC_VI when there are only 2 tx_queues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220908173618.155291-2-hdegoede@redhat.com
Update tx descriptor settings so broadcast packets on other ports can be
issued properly when DTIM count is 0. Before this, all broadcast packets
are sent via port 0 and won't be transmitted correctly.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-8-pkshih@realtek.com
In monitor mode we should be able to received all packets even if it's not
destined to us. But after scan, the configuration was wrongly set, so we
fix it.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-7-pkshih@realtek.com
This avoid potential memory leak under power saving mode.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-6-pkshih@realtek.com
NAV upper register is to limit the maximum NAV value to prevent
unexpected NAV, but the old setting is too small to reflect NAV from
AP transmiting big MPDU at once.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-3-pkshih@realtek.com
8852C needs this to change CMAC dma to full mode to keep receiving
packets after RX full event being resolved.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220916033811.13862-2-pkshih@realtek.com
SER (system error recovery) can deal with different crash types by
different levels of processes. Previous FW crash simulation triggers
a CPU exception which is one kind of SER L2 type. It can verify SER L2
flow which includes HW/FW restart.
Now, we want to increase crash simulation types. A debug function is added
to trigger control error in purpose for SER L1 simulation/verification.
And, debugfs fw_crash is extended to accept different parameters.
echo 1 > fw_crash:
simulate CPU exception as before
(keep 1 for compatibility with previous)
It will be catched and handled by SER L2.
(this requires HW/FW restart)
echo 2 > fw_crash:
simulate control error
It will be catched and handled by SER L1.
(driver and FW cooperate to recover this)
Besides, in order to apply to the above two cases,
rename RTW89_FLAG_RESTART_TRIGGER to RTW89_FLAG_CRASH_SIMULATING
and adjust where SER flow clears this bit for both L1 and L2.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-5-pkshih@realtek.com
With FW >= v0.27.40.0, 8852C FW has feature to handle crash simulation.
Besides, use RTW89_WCPU_BASE_MASK to replace use of RTW89_WCPU_BASE_ADDR
and work for both 8852A and 8852C.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-4-pkshih@realtek.com
Introudce a H2C feature to drop packets according to given parameters.
And, we implement instances to drop packets from BE, BK, VI, VO queues
by vif or sta. Then, we refine our callback of ieee80211_ops::flush to
deal with the case of drop=true via this feature.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-3-pkshih@realtek.com
Seaprate calling of rtw89_h2c_tx() out of if-expression, and bypass the
return value to upper caller.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220914035034.14521-2-pkshih@realtek.com
Different chips use different register and mask for
tx dma channels, so concentrate them.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-4-pkshih@realtek.com
Some PCI and MAC registers are changed for different
chips and correct them accordingly. And HCI MAD functions
belongs to MAC core, so move it to mac.h/.c.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-3-pkshih@realtek.com
For 8852C, rtw89_pci_lv1rst_stop_dma() and rtw89_pci_lv1rst_start_dma()
are offloaded to FW L1 reset flow. So, driver no longer needs to do them.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912071706.13619-2-pkshih@realtek.com
Add ops set_tid_config to support TID specific configuration.
We currently only support ampdu setting.
The command example is:
iw wlan0 set tidconf tids 0x3 ampdu off
iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0x2 ampdu on
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912070014.10018-3-pkshih@realtek.com
Support setting HE GI and LTF values to the kernel via nl80211.
We currently only support some GI and LTF values settings.
The command example is:
iw wlan0 set bitrates he-gi-2.4 0.8 he-ltf-2.4 2
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220912070014.10018-2-pkshih@realtek.com
