commit 6855ee8396 upstream.
Each of these clocks(s2f_usr0/1, sdmmc_clk, gpio_db, emac_ptp,
emac0/1/2) have a bypass setting that can use the boot_clk. The
previous representation was not correct.
Fix the representation.
Fixes: 80c6b7a089 ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efbe21df3e upstream.
Early documentation had a noc_clk, but in reality, it's just the
noc_free_clk. Remove the noc_clk clock and just use the noc_free_clk.
Fixes: 80c6b7a089 ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd1427c37 upstream.
If the bypass_reg is set, then we can return the bypass parent, however,
if there is not a bypass_reg, we need to figure what the correct parent
mux is.
The previous code never handled the parent mux if there was a
bypass_reg.
Fixes: 80c6b7a089 ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-4-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d927ccfccb upstream.
The kernel writes to swap files on f2fs directly without the assistance
of the filesystem. This direct write by kernel can be non-sequential
even when the f2fs is in LFS mode. Such non-sequential write conflicts
with the LFS semantics. Especially when f2fs is set up on zoned block
devices, the non-sequential write causes unaligned write command errors.
To avoid the non-sequential writes to swap files, prevent swap file
activation when the filesystem is in LFS mode.
Fixes: 4969c06a0d ("f2fs: support swap file w/ DIO")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85b18d7b5e upstream.
Turns out that the bit 61 in the TEID is not always 1 and if that's
the case the address space ID and the address are
unpredictable. Without an address and its address space ID we can't
export memory and hence we can only send a SIGSEGV to the process or
panic the kernel depending on who caused the exception.
Unfortunately bit 61 is only reliable if we have the "misc" UV feature
bit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 084ea4d611 ("s390/mm: add (non)secure page access exceptions handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c749d8c018 upstream.
Currently css_wait_for_slow_path() gets called inside the chp->lock.
The path-verification-loop of slowpath inside this lock could lead to
deadlock as reported by the lockdep validator.
The ccw_device_get_chp_desc() during the instance of a device-set-online
would try to acquire the same 'chp->lock' to read the chp->desc.
The instance of this function can get called from multiple scenario,
like probing or setting-device online manually. This could, in some
corner-cases lead to the deadlock.
lockdep validator reported this as,
CPU0 CPU1
---- ----
lock(&chp->lock);
lock(kn->active#43);
lock(&chp->lock);
lock((wq_completion)cio);
The chp->lock was introduced to serialize the access of struct
channel_path. This lock is not needed for the css_wait_for_slow_path()
function, so invoke the slow-path function outside this lock.
Fixes: b730f3a933 ("[S390] cio: add lock to struct channel_path")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef318b9edf upstream.
Use the MMU's role to get its effective SMEP value when injecting a fault
into the guest. When walking L1's (nested) NPT while L2 is active, vCPU
state will reflect L2, whereas NPT uses the host's (L1 in this case) CR0,
CR4, EFER, etc... If L1 and L2 have different settings for SMEP and
L1 does not have EFER.NX=1, this can result in an incorrect PFEC.FETCH
when injecting #NPF.
Fixes: e57d4a356a ("KVM: Add instruction fetch checking when walking guest page table")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112022bdb5 upstream.
Mark NX as being used for all non-nested shadow MMUs, as KVM will set the
NX bit for huge SPTEs if the iTLB mutli-hit mitigation is enabled.
Checking the mitigation itself is not sufficient as it can be toggled on
at any time and KVM doesn't reset MMU contexts when that happens. KVM
could reset the contexts, but that would require purging all SPTEs in all
MMUs, for no real benefit. And, KVM already forces EFER.NX=1 when TDP is
disabled (for WP=0, SMEP=1, NX=0), so technically NX is never reserved
for shadow MMUs.
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51696f39cb upstream.
LLVM does not emit optimal byteswap assembly, which results in high
stack usage in kvmhv_enter_nested_guest() due to the inlining of
byteswap_pt_regs(). With LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:289:6: error: stack frame size of
2512 bytes in function 'kvmhv_enter_nested_guest' [-Werror,-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 error generated.
While this gets fixed in LLVM, mark byteswap_pt_regs() as
noinline_for_stack so that it does not get inlined and break the build
due to -Werror by default in arch/powerpc/. Not inlining saves
approximately 800 bytes with LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:290:6: warning: stack frame size of
1728 bytes in function 'kvmhv_enter_nested_guest' [-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 warning generated.
Cc: stable@vger.kernel.org # v4.20+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1292
Link: https://bugs.llvm.org/show_bug.cgi?id=49610
Link: https://lore.kernel.org/r/202104031853.vDT0Qjqj-lkp@intel.com/
Link: https://gist.github.com/ba710e3703bf45043a31e2806c843ffd
Link: https://lore.kernel.org/r/20210621182440.990242-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b33bb78a1f upstream.
Mark #ACs that won't be reinjected to the guest as wanted by L0 so that
KVM handles split-lock #AC from L2 instead of forwarding the exception to
L1. Split-lock #AC isn't yet virtualized, i.e. L1 will treat it like a
regular #AC and do the wrong thing, e.g. reinject it into L2.
Fixes: e6f8b6c12f ("KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest")
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622172244.3561540-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c1daba15c upstream.
With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.
CC: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c24d373225 upstream.
try_grab_compound_head() is used to grab a reference to a page from
get_user_pages_fast(), which is only protected against concurrent freeing
of page tables (via local_irq_save()), but not against concurrent TLB
flushes, freeing of data pages, or splitting of compound pages.
Because no reference is held to the page when try_grab_compound_head() is
called, the page may have been freed and reallocated by the time its
refcount has been elevated; therefore, once we're holding a stable
reference to the page, the caller re-checks whether the PTE still points
to the same page (with the same access rights).
The problem is that try_grab_compound_head() has to grab a reference on
the head page; but between the time we look up what the head page is and
the time we actually grab a reference on the head page, the compound page
may have been split up (either explicitly through split_huge_page() or by
freeing the compound page to the buddy allocator and then allocating its
individual order-0 pages). If that happens, get_user_pages_fast() may end
up returning the right page but lifting the refcount on a now-unrelated
page, leading to use-after-free of pages.
To fix it: Re-check whether the pages still belong together after lifting
the refcount on the head page. Move anything else that checks
compound_head(page) below the refcount increment.
This can't actually happen on bare-metal x86 (because there, disabling
IRQs locks out remote TLB flushes), but it can happen on virtualized x86
(e.g. under KVM) and probably also on arm64. The race window is pretty
narrow, and constantly allocating and shattering hugepages isn't exactly
fast; for now I've only managed to reproduce this in an x86 KVM guest with
an artificially widened timing window (by adding a loop that repeatedly
calls `inl(0x3f8 + 5)` in `try_get_compound_head()` to force VM exits, so
that PV TLB flushes are used instead of IPIs).
As requested on the list, also replace the existing VM_BUG_ON_PAGE() with
a warning and bailout. Since the existing code only performed the BUG_ON
check on DEBUG_VM kernels, ensure that the new code also only performs the
check under that configuration - I don't want to mix two logically
separate changes together too much. The macro VM_WARN_ON_ONCE_PAGE()
doesn't return a value on !DEBUG_VM, so wrap the whole check in an #ifdef
block. An alternative would be to change the VM_WARN_ON_ONCE_PAGE()
definition for !DEBUG_VM such that it always returns false, but since that
would differ from the behavior of the normal WARN macros, it might be too
confusing for readers.
Link: https://lkml.kernel.org/r/20210615012014.1100672-1-jannh@google.com
Fixes: 7aef4172c7 ("mm: handle PTE-mapped tail pages in gerneric fast gup implementaiton")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02b49cd117 upstream.
During system resume, MHI host triggers M3->M0 transition and then waits
for target device to enter M0 state. Once done, the device queues a state
change event into ctrl event ring and notifies MHI host by raising an
interrupt, where a tasklet is scheduled to process this event. In most
cases, the tasklet is served timely and wait operation succeeds.
However, there are cases where CPU is busy and cannot serve this tasklet
for some time. Once delay goes long enough, the device moves itself to M1
state and also interrupts MHI host after inserting a new state change
event to ctrl ring. Later when CPU finally has time to process the ring,
there will be two events:
1. For M3->M0 event, which is the first event to be processed queued first.
The tasklet handler serves the event, updates device state to M0 and
wakes up the task.
2. For M0->M1 event, which is processed later, the tasklet handler
triggers M1->M2 transition and updates device state to M2 directly,
then wakes up the MHI host (if it is still sleeping on this wait queue).
Note that although MHI host has been woken up while processing the first
event, it may still has no chance to run before the second event is
processed. In other words, MHI host has to keep waiting till timeout
causing the M0 state to be missed.
kernel log here:
...
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2
...
Fix this issue by simply adding M2 as a valid state for resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Cc: stable@vger.kernel.org
Fixes: 0c6b20a1d7 ("bus: mhi: core: Add support for MHI suspend and resume")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org
[mani: slightly massaged the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5483b904bf upstream.
When find a task from wait queue to wake up, a non-privileged task may
be found out, rather than the privileged. This maybe lead a deadlock
same as commit dfe1fe75e0 ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):
Privileged delegreturn task is queued to privileged list because all
the slots are assigned. If there has no enough slot to wake up the
non-privileged batch tasks(session less than 8 slot), then the privileged
delegreturn task maybe lost waked up because the found out task can't
get slot since the session is on draining.
So we should treate the privileged task as the emergency task, and
execute it as for as we can.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5fcdfacc01 ("NFSv4: Return delegations synchronously in evict_inode")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcb170a9d8 upstream.
The 'queue->nr' will wraparound from 0 to 255 when only current
priority queue has tasks. This maybe lead a deadlock same as commit
dfe1fe75e0 ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):
Privileged delegreturn task is queued to privileged list because all
the slots are assigned. When non-privileged task complete and release
the slot, a non-privileged maybe picked out. It maybe allocate slot
failed when the session on draining.
If the 'queue->nr' has wraparound to 255, and no enough slot to
service it, then the privileged delegreturn will lost to wake up.
So we should avoid the wraparound on 'queue->nr'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5fcdfacc01 ("NFSv4: Return delegations synchronously in evict_inode")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e41eb3e408 upstream.
Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b17233d385 upstream.
Rather than just indicating that transmission can start, this patch
requires the explicit flushing of the network TX queue when the driver
is informed by the device that it can transmit, next to its
configuration.
In this way, if frames have already been written by the application,
they will actually be transmitted.
Fixes: ffd137f704 ("can: peak/pcie_fd: remove useless code when interface starts")
Link: https://lore.kernel.org/r/20210623142600.149904-1-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22c696fed2 upstream.
Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion.
Without this patch, we will run in to j1939_can_recv() after priv was
freed by j1939_sk_release()->j1939_sk_sock_destruct()
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14a4696bc3 upstream.
When closing the isotp socket, the potentially running hrtimers are
canceled before removing the subscription for CAN identifiers via
can_rx_unregister().
This may lead to an unintended (re)start of a hrtimer in
isotp_rcv_cf() and isotp_rcv_fc() in the case that a CAN frame is
received by isotp_rcv() while the subscription removal is processed.
However, isotp_rcv() is called under RCU protection, so after calling
can_rx_unregister, we may call synchronize_rcu in order to wait for
any RCU read-side critical sections to finish. This prevents the
reception of CAN frames after hrtimer_cancel() and therefore the
unintended (re)start of the hrtimers.
Link: https://lore.kernel.org/r/20210618173713.2296-1-socketcan@hartkopp.net
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb8696ab14 upstream.
can_can_gw_rcv() is called under RCU protection, so after calling
can_rx_unregister(), we have to call synchronize_rcu in order to wait
for any RCU read-side critical sections to finish before removing the
kmem_cache entry with the referenced gw job entry.
Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net
Fixes: c1aabdf379 ("can-gw: add netlink based CAN routing")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5f9023fa6 upstream.
can_rx_register() callbacks may be called concurrently to the call to
can_rx_unregister(). The callbacks and callback data, though, are
protected by RCU and the struct sock reference count.
So the callback data is really attached to the life of sk, meaning
that it should be released on sk_destruct. However, bcm_remove_op()
calls tasklet_kill(), and RCU callbacks may be called under RCU
softirq, so that cannot be used on kernels before the introduction of
HRTIMER_MODE_SOFT.
However, bcm_rx_handler() is called under RCU protection, so after
calling can_rx_unregister(), we may call synchronize_rcu() in order to
wait for any RCU read-side critical sections to finish. That is,
bcm_rx_handler() won't be called anymore for those ops. So, we only
free them, after we do that synchronize_rcu().
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd84bbbac1 upstream.
Commit 5d1b1b3f49 ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.
Fixes: 43c73221b3 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c89849cc02 upstream.
The avefreec should be average free clusters instead
of average free blocks, otherwize Orlov's allocator
will not work properly when bigalloc enabled.
Cc: stable@kernel.org
Signed-off-by: Pan Dong <pandong.peter@bytedance.com>
Link: https://lore.kernel.org/r/20210525073656.31594-1-pandong.peter@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5e7010e54 upstream.
After converting fs shrinkers to new scan/count API, we are no longer
pass zero nr_to_scan parameter to detect the number of objects to free,
just remove this check.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fb7c70a88 upstream.
The cache_cnt parameter of tracepoint ext4_es_shrink_exit means the
remaining cache count after shrink, but now it is the cache count before
shrink, fix it by read sbi->s_extent_cache_cnt again.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f6840c4fd upstream.
After commit c89128a008 ("ext4: handle errors on
ext4_commit_super"), 'ret' may be set to 0 before calling
ext4_fill_flex_info(), if ext4_fill_flex_info() fails ext4_mount()
doesn't return error code, it makes 'root' is null which causes crash
in legacy_get_tree().
Fixes: c89128a008 ("ext4: handle errors on ext4_commit_super")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210510111051.55650-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0b040f5f2 upstream.
A code in iomap alloc may overflow block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.
Cc: stable@kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210412102333.2676-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a037b7f3 upstream.
In ext4_orphan_cleanup(), if ext4_truncate() failed to get a transaction
handle, it didn't remove the inode from the in-core orphan list, which
may probably trigger below error dump in ext4_destroy_inode() during the
final iput() and could lead to memory corruption on the later orphan
list changes.
EXT4-fs (sda): Inode 6291467 (00000000b8247c67): orphan list check failed!
00000000b8247c67: 0001f30a 00000004 00000000 00000023 ............#...
00000000e24cde71: 00000006 014082a3 00000000 00000000 ......@.........
0000000072c6a5ee: 00000000 00000000 00000000 00000000 ................
...
This patch fix this by cleanup in-core orphan list manually if
ext4_truncate() return error.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210507071904.160808-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6819703f5a upstream.
The defrag loop processes leaves in batches and starting transaction for
each. The whole defragmentation on a given root is protected by a bit
but in case the transaction fails, the bit is not cleared
In case the transaction fails the bit would prevent starting
defragmentation again, so make sure it's cleared.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f216562731 upstream.
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8ac76cdd1 upstream.
During an incremental send operation, when processing the new references
for the current inode, we might send an unlink operation for another inode
that has a conflicting path and has more than one hard link. However this
path was computed and cached before we processed previous new references
for the current inode. We may have orphanized a directory of that path
while processing a previous new reference, in which case the path will
be invalid and cause the receiver process to fail.
The following reproducer triggers the problem and explains how/why it
happens in its comments:
$ cat test-send-unlink.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# Create our test files and directory. Inode 259 (file3) has two hard
# links.
touch $MNT/file1
touch $MNT/file2
touch $MNT/file3
mkdir $MNT/A
ln $MNT/file3 $MNT/A/hard_link
# Filesystem looks like:
#
# . (ino 256)
# |----- file1 (ino 257)
# |----- file2 (ino 258)
# |----- file3 (ino 259)
# |----- A/ (ino 260)
# |---- hard_link (ino 259)
#
# Now create the base snapshot, which is going to be the parent snapshot
# for a later incremental send.
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send -f /tmp/snap1.send $MNT/snap1
# Move inode 257 into directory inode 260. This results in computing the
# path for inode 260 as "/A" and caching it.
mv $MNT/file1 $MNT/A/file1
# Move inode 258 (file2) into directory inode 260, with a name of
# "hard_link", moving first inode 259 away since it currently has that
# location and name.
mv $MNT/A/hard_link $MNT/tmp
mv $MNT/file2 $MNT/A/hard_link
# Now rename inode 260 to something else (B for example) and then create
# a hard link for inode 258 that has the old name and location of inode
# 260 ("/A").
mv $MNT/A $MNT/B
ln $MNT/B/hard_link $MNT/A
# Filesystem now looks like:
#
# . (ino 256)
# |----- tmp (ino 259)
# |----- file3 (ino 259)
# |----- B/ (ino 260)
# | |---- file1 (ino 257)
# | |---- hard_link (ino 258)
# |
# |----- A (ino 258)
# Create another snapshot of our subvolume and use it for an incremental
# send.
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2
# Now unmount the filesystem, create a new one, mount it and try to
# apply both send streams to recreate both snapshots.
umount $DEV
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# First add the first snapshot to the new filesystem by applying the
# first send stream.
btrfs receive -f /tmp/snap1.send $MNT
# The incremental receive operation below used to fail with the
# following error:
#
# ERROR: unlink A/hard_link failed: No such file or directory
#
# This is because when send is processing inode 257, it generates the
# path for inode 260 as "/A", since that inode is its parent in the send
# snapshot, and caches that path.
#
# Later when processing inode 258, it first processes its new reference
# that has the path of "/A", which results in orphanizing inode 260
# because there is a a path collision. This results in issuing a rename
# operation from "/A" to "/o260-6-0".
#
# Finally when processing the new reference "B/hard_link" for inode 258,
# it notices that it collides with inode 259 (not yet processed, because
# it has a higher inode number), since that inode has the name
# "hard_link" under the directory inode 260. It also checks that inode
# 259 has two hardlinks, so it decides to issue a unlink operation for
# the name "hard_link" for inode 259. However the path passed to the
# unlink operation is "/A/hard_link", which is incorrect since currently
# "/A" does not exists, due to the orphanization of inode 260 mentioned
# before. The path is incorrect because it was computed and cached
# before the orphanization. This results in the receiver to fail with
# the above error.
btrfs receive -f /tmp/snap2.send $MNT
umount $MNT
When running the test, it fails like this:
$ ./test-send-unlink.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: unlink A/hard_link failed: No such file or directory
Fix this by recomputing a path before issuing an unlink operation when
processing the new references for the current inode if we previously
have orphanized a directory.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7749510c45 upstream.
The Ux500 HREF LEDs have not been probing properly for a
while as this was introduce:
ret = of_property_read_u32(np, "color", &led_color);
if (ret)
return ret;
Since the device tree did not define the new invented color
attribute, probe was failing.
Define color attributes for the LEDs so they work again.
Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@linaro.org
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8671c7dc7 upstream.
Annotate the firmware files CCP might need using MODULE_FIRMWARE().
This will get them included into an initrd when CCP is also included
there. Otherwise the CCP module will not find its firmware when loaded
before the root-fs is mounted.
This can cause problems when the pre-loaded SEV firmware is too old to
support current SEV and SEV-ES virtualization features.
Fixes: e93720606e ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model")
Cc: stable@vger.kernel.org # v4.20+
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f84af5da upstream.
Even though we validate user-provided inputs we then traverse past
validated data when applying the new map. The issue was originally
discovered by Murray McAllister with this simple POC (if the following
is executed by an unprivileged user it will instantly panic the system):
int main(void) {
int fd, ret;
unsigned int buffer[10000];
fd = open("/dev/input/js0", O_RDONLY);
if (fd == -1)
printf("Error opening file\n");
ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer);
printf("%d\n", ret);
}
The solution is to traverse internal buffer which is guaranteed to only
contain valid date when constructing the map.
Fixes: 182d679b22 ("Input: joydev - prevent potential read overflow in ioctl")
Fixes: 999b874f4a ("Input: joydev - validate axis/button maps before clobbering current ones")
Reported-by: Murray McAllister <murray.mcallister@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Alexander Larkin <avlarkin82@gmail.com>
Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e8f0d6740 upstream.
... and actually should just check it's given an iovec-backed iterator
in the first place.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a506abc7b6 upstream.
we need to advance the iterator...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04831e892b upstream.
Some environments do not set $SHELL when running tests. There's no
need to use $SHELL here anyway, since "cat" can be used to receive any
delivered signals from the kernel. Additionally avoid using bash-isms
in the command, and record stderr for posterity.
Fixes: 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
Cc: stable@vger.kernel.org
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d98e4d9541 upstream.
When checking the file name attribute, we want to ensure that it fits
within the bounds of ATTR_RECORD. To do this, we should check that (attr
record + file name offset + file name length) < (attr record + attr record
length).
However, the original check did not include the file name offset in the
calculation. This means that corrupted on-disk metadata might not caught
by the incorrect file name check, and lead to an invalid memory access.
An example can be seen in the crash report of a memory corruption error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=a1a1e379b225812688566745c3e2f7242bffc246
Adding the file name offset to the validity check fixes this error and
passes the Syzbot reproducer test.
Link: https://lkml.kernel.org/r/20210614050540.289494-1-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+213ac8bb98f7f4420840@syzkaller.appspotmail.com
Tested-by: syzbot+213ac8bb98f7f4420840@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d49d3508b upstream.
On an error path, init_statfs calls iput(pn) after pn has already been put.
Fix that by setting pn to NULL after the initial iput.
Fixes: 97fd734ba1 ("gfs2: lookup local statfs inodes prior to journal recovery")
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3c51c55cb upstream.
On filesystems with a block size smaller than PAGE_SIZE and non-empty
files smaller then PAGE_SIZE, gfs2_page_mkwrite could end up allocating
excess blocks beyond the end of the file, similar to fallocate. This
doesn't make sense; fix it.
Reported-by: Bob Peterson <rpeterso@redhat.com>
Fixes: 184b4e6085 ("gfs2: Fix end-of-file handling in gfs2_page_mkwrite")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b31d9d6d7a upstream.
when system is doing s4, the process of xhci_resume may be as below:
1、xhci_mem_cleanup
2、xhci_init->xhci_mem_init->xhci_mem_cleanup(when memory is not enough).
xhci_mem_cleanup will be executed twice when system is out of memory.
xhci->port_caps is freed in xhci_mem_cleanup,but it isn't set to NULL.
It will be freed twice when xhci_mem_cleanup is called the second time.
We got following bug when system resumes from s4:
kernel BUG at mm/slub.c:309!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
CPU: 0 PID: 5929 Tainted: G S W 5.4.96-arm64-desktop #1
pc : __slab_free+0x5c/0x424
lr : kfree+0x30c/0x32c
Call trace:
__slab_free+0x5c/0x424
kfree+0x30c/0x32c
xhci_mem_cleanup+0x394/0x3cc
xhci_mem_init+0x9ac/0x1070
xhci_init+0x8c/0x1d0
xhci_resume+0x1cc/0x5fc
xhci_plat_resume+0x64/0x70
platform_pm_thaw+0x28/0x60
dpm_run_callback+0x54/0x24c
device_resume+0xd0/0x200
async_resume+0x24/0x60
async_run_entry_fn+0x44/0x110
process_one_work+0x1f0/0x490
worker_thread+0x5c/0x450
kthread+0x158/0x160
ret_from_fork+0x10/0x24
Original patch that caused this issue was backported to 4.4 stable,
so this should be backported to 4.4 stabe as well.
Fixes: cf0ee7c60c ("xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210617150354.1512157-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03026197bb upstream.
typec_register_altmode() misses to call altmode_id_remove() in an error
path. Add the missed function call to fix it.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20210617073226.47599-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84524d1232 upstream.
Creation EP's debugfs called earlier than debugfs folder for dwc3
device created. As result EP's debugfs are created in '/sys/kernel/debug'
instead of '/sys/kernel/debug/usb/dwc3.1.auto'.
Moved dwc3_debugfs_init() function call before calling
dwc3_core_init_mode() to allow create dwc3 debugfs parent before
creating EP's debugfs's.
Fixes: 8d396bb0a5 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/01fafb5b2d8335e98e6eadbac61fc796bdf3ec1a.1623948457.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4897807753 upstream.
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.
In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d143825baf upstream.
The ROM load sometimes seems to return an unknown status
(RENESAS_ROM_STATUS_NO_RESULT) instead of success / fail.
If the ROM load indeed failed this leads to failures when trying to
communicate with the controller later on.
Attempt to load firmware using RAM load in those cases.
Fixes: 2478be82de ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable@vger.kernel.org
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210615153758.253572-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4249d6fbc1 upstream.
when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.
on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),
if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;
fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
