For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f10046799 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in the versal EDAC driver
-----BEGIN PGP SIGNATURE-----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=0/mm
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
- Fix incorrect delay handling in the plpks (keystore) code.
- Fix a panic when an LPAR boots with a frozen PE.
Thanks to: Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, Nayna Jain.
-----BEGIN PGP SIGNATURE-----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=nXL6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
- Remove the broken vsyscall emulation code from
the page fault code.
- Fix kexec crash triggered by certain SEV RMP
table layouts.
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o9E8
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
Here are some small char/misc/other driver fixes and new device ids for
6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdD2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk38wCeJeUXW4/yQ4BTj7cHir0aOowVs+UAnAxCUwzt
NpooaVg3v9tzLtvAOp1O
=YfmA
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
Here are some small USB driver fixes for reported problems for 6.9-rc7.
Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdEhQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZ0wCgpMcwSdBww3xH3JHwYjukeW8EPKYAn3N3CBb+
s/e/cETFHgg8RpWq38Sy
=/6D3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZjb8AwAKCRBAj56VGEWX
nEyMAP99BLxJkuEq6nyiHuAvXUpDAX/unCZmsCyt/p5Q2dEfGgEAoDn1Al+0EIb4
yLqu6IeHPh7YGQ/oS0CFJYrZeURyzwY=
=oso0
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
- probe-events: Fix memory leak in parsing probe argument. There is a
memory leak (forget to free an allocated buffer) in a memory allocation
failure path. Fixes it to jump to the correct error handling code.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmY2NRQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bIacH/RmSQaraWiwQmMaWT8Pp
wotOxtMYnl2uLNeVx3vn55+G1Xr/rJP3E9EBGTa+HMPky3trea07eBM5B3UnwT2y
Y75Nhm6z3SFaLBygdKmQZgyIJF1W9w6J1cfqPwPlfR3h08a/9rNojd/DKBo7fLjk
uwGAUHsB6sNhTvRF64wtr+I7V+8CGwNnApyQvf/mLnHsELerzm86nxDhXcfIvb1P
UbM4nupqrV3QYCLYdXmma34PFFJzS3ioINGn692QtHFOSEdSwJfqsNv6AU/w98zD
8o2rlSadc64Yl74vMLFRtBVS3K49VQXNgUUXjx2Gpj9/v80qn+B41HwaNSl1Lagx
lIY=
=tob5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero
freed the contents of the eventfs_inode and then used kfree_rcu()
to free the inode itself. But the contents should also be protected
by RCU. Switch to a call_rcu() that calls a function to free all
of the eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented by
eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently
there is no interface for that. Add a "release" callback to
the eventfs_inode entry array that allows for freeing of data
that can be referenced by the eventfs_inode being opened.
Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the
last reference to the eventfs_inode is released and the file
is removed. This prevents races between freeing the descriptor
and the opening of the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect
that could cause security concerns. When the tracefs is remounted
with a given gid or uid, all the files within it should inherit
that gid or uid. But if the admin had changed the permission of
some file within the tracefs file system, it would not get updated
by the remount. This caused the kselftest of file permissions
to fail the second time it is run. The first time, all changes
would look fine, but the second time, because the changes were
"saved", the remount did not reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZjXxzxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqzGAQCX8g7gtngGgwSsWqPW5GmecCifwFja
k7cVEDhMYPnDeAEAkYi2ZBgJRkPsWPfMRClDK/DXP4woOo58asxtIxfTMgg=
=mCkt
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
-----BEGIN PGP SIGNATURE-----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=05zN
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional.
- Restore RPM clks on Qualcomm msm8976 by setting num_clks.
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed.
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens on
some devices.
- Revert back to of_match_device() in the Samsung clkout driver to get
the match data based on the parent device's compatible string.
-----BEGIN PGP SIGNATURE-----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=yAwH
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.
Make all events directories act the same.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.
Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 43aa6f97c2 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add missing RCH support for endpoint access_coordinate calculation
-----BEGIN PGP SIGNATURE-----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=CqsW
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZjTV0gAKCRCAXGG7T9hj
vlCoAP4wxpMiuAi7AR2PGUiSeGjH/RwDBJR8xBXJawwpzou8TwD/eWK0uYGYyfAr
R1P2KQcOynBibNQ8iNvVkYjO270v5QY=
=/4ly
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes when running as Xen PV guests for issues introduced in the
6.9 merge window, both related to apic id handling"
* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: return a sane initial apic id when running as PV guest
x86/xen/smp_pv: Register the boot CPU APIC properly
- Avoid triggering the softlockup watchdog when accepting large chunks
of memory from the hypervisor
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZjS4yAAKCRAwbglWLn0t
XIOQAPkBZlRdhlbegKjguyvVk9S6EKAgA1j94L/gK8ZL9olbUwD/fEuBIm+U2wtv
Ntulu0l5kiHSJzC8lwsUdtUSd+ovUQg=
=o5dU
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
-----BEGIN PGP SIGNATURE-----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=of/D
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240503' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Nothing major in here - an nvme pull request with mostly auth/tcp
fixes, and a single fix for ublk not setting segment count and size
limits"
* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
ublk: remove segment count and size limits
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition,
recent emu10k1 regression fixes and usual HD-audio quirks are
included.
-----BEGIN PGP SIGNATURE-----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=K8HF
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
A few small fixes for v6.9, the core fix is for issues with reuse of a
spi_message in the case where we've got queued messages (a relatively
rare occurrence with modern code so it wasn't noticed in testing). We
also avoid an issue with the Kunpeng driver by simply removing the debug
interface that could trigger it, and address issues with confusing and
corrupted output when printing the IP version of the AXI SPI engine.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmY0RbIACgkQJNaLcl1U
h9Ao1wf/dSEewEiXc7VX1vVyF0LnHU71/36b/cJCLFErUNckHvDOa6Be3P0W8ThP
WQrbpVizvSCr29hvyNwUtmWLdXFxjyj/69QsXT7NtNCofJTV9kQ5ILgtsj/Pe8Yr
aVInONIqyuZlv3xEiRQIt+vnxmz3JM2zVdjFjcj1CrKpEbOob4VGUgwMLi0itvCJ
F5WKiVDUMW/LnbEW5mPPyIPbAN1mKGKyGtW4Z9968/BYvUQzz5vzPOst0zvmkHJo
SZ47n8G7rbcZXJB4TX62fOTp5gIm+/JQZKQ75MhmxlqYE4/ztZLsvqb9pG86c0+K
NqJA/Yjs5rTE5oeIDwBUlSY8Orh0fA==
=OIWj
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v6.9,
The core fix is for issues with reuse of a spi_message in the case
where we've got queued messages (a relatively rare occurrence with
modern code so it wasn't noticed in testing).
We also avoid an issue with the Kunpeng driver by simply removing the
debug interface that could trigger it, and address issues with
confusing and corrupted output when printing the IP version of the AXI
SPI engine"
* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix null pointer dereference within spi_sync
spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
spi: axi-spi-engine: fix version format string
In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.
Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.
Fixes: a899d32486 ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=zEs6
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- set correct ram_bytes when splitting ordered extent. This can be
inconsistent on-disk but harmless as it's not used for calculations
and it's only advisory for compression
- fix lockdep splat when taking cleaner mutex in qgroups disable ioctl
- fix missing mutex unlock on error path when looking up sys chunk for
relocation
* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set correct ram_bytes when splitting ordered extent
btrfs: take the cleaner_mutex earlier in qgroup disable
btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZjO8UhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8C4cAQCgIOVXwXWum7VMG+2jfnR14mIb
oVfiySCUevlKOZXTwgEAuZsEvYgb73YEODnCZrg2lUETfrPeG0Mm6C1L15ev9AE=
=oRdp
-----END PGP SIGNATURE-----
Merge tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:
[Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001
This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.
Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.
Fixes: 52128a7a21 ("86/cpu/topology: Make the APIC mismatch warnings complete")
Signed-off-by: Juergen Gross <jgross@suse.com>
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2)
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The following two driver fixes:
* The firewire-ohci driver for 1394 OHCI hardware does not fill time stamp
for response packet when handling asynchronous transaction to local
destination. This brings an inconvenience that the response packet is not
equivalent between the transaction to local and remote. It is fixed by
fulfilling the time stamp with hardware time. The fix should be
applied to Linux kernel v6.5 or later as well.
* The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
long-standing issue about the behaviour when user space application
passes less size of buffer than expected. It is fixed by returning zero
according to the convention of UNIX-like systems.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZjN/5AAKCRCsLtaWM8Lw
E7lnAP9wMPBAsCTIGeoRO4CVReooSzxrVztLt8udrc+bhe/jjgD+LlbfjNQoeGYV
iWpZI1xTzx+LYKpgVRGjnE68QN8rQQ4=
=jGSI
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"Two driver fixes:
- The firewire-ohci driver for 1394 OHCI hardware does not fill time
stamp for response packet when handling asynchronous transaction to
local destination. This brings an inconvenience that the response
packet is not equivalent between the transaction to local and
remote. It is fixed by fulfilling the time stamp with hardware
time. The fix should be applied to Linux kernel v6.5 or later as
well.
- The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
long-standing issue about the behaviour when user space application
passes less size of buffer than expected. It is fixed by returning
zero according to the convention of UNIX-like systems"
* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: fulfill timestamp for some local asynchronous transaction
firewire: nosy: ensure user_length is taken into account when fetching packet contents
The topology core expects the boot APIC to be registered from earhy APIC
detection first and then again when the firmware tables are evaluated. This
is used for detecting the real BSP CPU on a kexec kernel.
The recent conversion of XEN/PV to register fake APIC IDs failed to
register the boot CPU APIC correctly as it only registers it once. This
causes the BSP detection mechanism to trigger wrongly:
CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1
Additionally this results in one CPU being ignored.
Register the boot CPU APIC twice so that the XEN/PV fake enumeration
behaves like real firmware.
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: e753070234 ("x86/xen/smp_pv: Register fake APICs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87a5l8s2fg.ffs@tglx
Signed-off-by: Juergen Gross <jgross@suse.com>
Fix a memory leak and a few locking issues (that may cause the kernel
to crash in principle if all goes wrong) in the thermal debug code
introduced during the 6.8 development cycle.
-----BEGIN PGP SIGNATURE-----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=bEdF
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a memory leak and a few locking issues (that may cause the kernel
to crash in principle if all goes wrong) in the thermal debug code
introduced during the 6.8 development cycle"
* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Prevent use-after-free from occurring after cdev removal
thermal/debugfs: Fix two locking issues with thermal zone debug
thermal/debugfs: Free all thermal zone debug memory on zone removal
Relatively calm week, likely due to public holiday in most places.
No known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmYzaRsSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkh70P/jzsTsvzHspu3RUwcsyvWpSoJPcxP2tF
5SKR66o8sbSjB5I26zUi/LtRZgbPO32GmLN2Y8GvP74h9lwKdDo4AY4volZKCT6f
lRG6GohvMa0lSPSn1fti7CKVzDOsaTHvLz3uBBr+Xb9ITCKh+I+zGEEDGj/47SQN
tmDWHPF8OMs2ezmYS5NqRIQ3CeRz6uyLmEoZhVm4SolypZ18oEg7GCtL3u6U48n+
e3XB3WwKl0ZxK8ipvPgUDwGIDuM5hEyAaeNon3zpYGoqitRsRITUjULpb9dT4DtJ
Jma3OkarFJNXgm4N/p/nAtQ9AdiAloF9ivZXs2t0XCdrrUZJUh05yuikoX+mLfpw
GedG2AbaVl6mdqNkrHeyf5SXKuiPgeCLVfF2xMjS0l1kFbY+Bt8BqnRSdOrcoUG0
zlSzBeBtajttMdnalWv2ZshjP8uo/NjXydUjoVNwuq8xGO5wP+zhNnwhOvecNyUg
t7q2PLokahlz4oyDqyY/7SQ0hSEndqxOlt43I6CthoWH0XkS83nTPdQXcTKQParD
ntJUk5QYwefUT1gimbn/N8GoP7a1+ysWiqcf/7+SNm932gJGiDt36+HOEmyhIfIG
IDWTWJJW64SnPBIUw59MrG7hMtbfaiZiFQqeUJQpFVrRr+tg5z5NUZ5thA+EJVd8
qiVDvmngZFiv
=f6KY
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
Pull NVMe fixes from Keith.
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction
with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following
crash when initialising the restricted pools at boot-time:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
| Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
| pc : rmem_swiotlb_device_init+0xfc/0x1ec
| lr : rmem_swiotlb_device_init+0xf0/0x1ec
| Call trace:
| rmem_swiotlb_device_init+0xfc/0x1ec
| of_reserved_mem_device_init_by_idx+0x18c/0x238
| of_dma_configure_id+0x31c/0x33c
| platform_dma_configure+0x34/0x80
faddr2line reveals that the crash is in the list validation code:
include/linux/list.h:83
include/linux/rculist.h:79
include/linux/rculist.h:106
kernel/dma/swiotlb.c:306
kernel/dma/swiotlb.c:1695
because add_mem_pool() is trying to list_add_rcu() to a NULL
'mem->pools'.
Fix the crash by initialising the 'mem->pools' list_head in
rmem_swiotlb_device_init() before calling add_mem_pool().
Reported-by: Nikita Ioffe <ioffe@google.com>
Tested-by: Nikita Ioffe <ioffe@google.com>
Fixes: 1aaa736815 ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Richard Gobert says:
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================
Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ff ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae19 ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Robert Richter