This patch remembers which smap triggers the allocation
of a 'struct bpf_local_storage' object. The local_storage is
allocated during the very first selem added to the owner.
The smap pointer is needed when using the bpf_mem_cache_free
in a later patch because it needs to free to the correct
smap's bpf_mem_alloc object.
When a selem is being removed, it needs to check if it is
the selem that triggers the creation of the local_storage.
If it is, the local_storage->smap pointer will be reset to NULL.
This NULL reset is done under the local_storage->lock in
bpf_selem_unlink_storage_nolock() when a selem is being removed.
Also note that the local_storage may not go away even
local_storage->smap is NULL because there may be other
selem still stored in the local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__bpf_selem_unlink_storage is taking the spin lock and there is
no name collision also. Having the preceding '__' is confusing
when reviewing the later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_local_storage_map_alloc() is the only caller of
__bpf_local_storage_map_alloc(). The remaining logic in
bpf_local_storage_map_alloc() is only a one liner setting
the smap->cache_idx.
Remove __bpf_local_storage_map_alloc() to simplify code.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch first renames bpf_local_storage_unlink_nolock to
bpf_local_storage_destroy(). It better reflects that it is only
used when the storage's owner (sk/task/cgrp/inode) is being kfree().
All bpf_local_storage_destroy's caller is taking the spin lock and
then free the storage. This patch also moves these two steps into
the bpf_local_storage_destroy.
This is a preparation work for a later patch that uses
bpf_mem_cache_alloc/free in the bpf_local_storage.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch moves the bpf_local_storage_free_rcu() and
bpf_selem_unlink_map() to static because they are
not used outside of bpf_local_storage.c.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The send_signal tracepoint tests are non-deterministically failing in
CI. The test works as follows:
1. Two pairs of file descriptors are created using the pipe() function.
One pair is used to communicate between a parent process -> child
process, and the other for the reverse direction.
2. A child is fork()'ed. The child process registers a signal handler,
notifies its parent that the signal handler is registered, and then
and waits for its parent to have enabled a BPF program that sends a
signal.
3. The parent opens and loads a BPF skeleton with programs that send
signals to the child process. The different programs are triggered by
different perf events (either NMI or normal perf), or by regular
tracepoints. The signal is delivered to the child whenever the child
triggers the program.
4. The child's signal handler is invoked, which sets a flag saying that
the signal handler was reached. The child then signals to the parent
that it received the signal, and the test ends.
The perf testcases (send_signal_perf{_thread} and
send_signal_nmi{_thread}) work 100% of the time, but the tracepoint
testcases fail non-deterministically because the tracepoint is not
always being fired for the child.
There are two tracepoint programs registered in the test:
'tracepoint/sched/sched_switch', and
'tracepoint/syscalls/sys_enter_nanosleep'. The child never intentionally
blocks, nor sleeps, so neither tracepoint is guaranteed to be triggered.
To fix this, we can have the child trigger the nanosleep program with a
usleep().
Before this patch, the test would fail locally every 2-3 runs. Now, it
doesn't fail after more than 1000 runs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230310061909.1420887-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When doing state comparison, if old state has register that is not
marked as REG_LIVE_READ, then we just skip comparison, regardless what's
the state of corresponing register in current state. This is because not
REG_LIVE_READ register is irrelevant for further program execution and
correctness. All good here.
But when we get to precision propagation, after two states were declared
equivalent, we don't take into account old register's liveness, and thus
attempt to propagate precision for register in current state even if
that register in old state was not REG_LIVE_READ anymore. This is bad,
because register in current state could be anything at all and this
could cause -EFAULT due to internal logic bugs.
Fix by taking into account REG_LIVE_READ liveness mark to keep the logic
in state comparison in sync with precision propagation.
Fixes: a3ce685dd0 ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309224131.57449-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
State equivalence check and checkpointing performed in is_state_visited()
employs certain heuristics to try to save memory by avoiding state checkpoints
if not enough jumps and instructions happened since last checkpoint. This leads
to unpredictability of whether a particular instruction will be checkpointed
and how regularly. While normally this is not causing much problems (except
inconveniences for predictable verifier tests, which we overcome with
BPF_F_TEST_STATE_FREQ flag), turns out it's not the case for open-coded
iterators.
Checking and saving state checkpoints at iter_next() call is crucial for fast
convergence of open-coded iterator loop logic, so we need to force it. If we
don't do that, is_state_visited() might skip saving a checkpoint, causing
unnecessarily long sequence of not checkpointed instructions and jumps, leading
to exhaustion of jump history buffer, and potentially other undesired outcomes.
It is expected that with correct open-coded iterators convergence will happen
quickly, so we don't run a risk of exhausting memory.
This patch adds, in addition to prune and jump instruction marks, also a
"forced checkpoint" mark, and makes sure that any iter_next() call instruction
is marked as such.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230310060149.625887-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
Make BPF-side compiler flags stricter by adding -Wall. Fix tons of small
issues pointed out by compiler immediately after that. That includes newly
added bpf_for(), bpf_for_each(), and bpf_repeat() macros.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We recently added -Wuninitialized, but it's not enough to catch various
silly mistakes or omissions. Let's go all the way to -Wall, just like we
do for user-space code.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Once we enable -Wall for BPF sources, compiler will complain about lots
of unused variables, variables that are set but never read, etc.
Fix all these issues first before enabling -Wall in Makefile.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add __sink(expr) macro that forces compiler to believe that passed in
expression is both read and written. It used a simple embedded asm for
this. This is useful in a lot of tests where we assign value to some variable
to trigger some action, but later don't read variable, causing compiler
to complain (if corresponding compiler warnings are turned on, which
we'll do in the next patch).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309054015.4068562-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With latest llvm17, selftest fexit_bpf2bpf/func_replace_return_code
has the following verification failure:
0: R1=ctx(off=0,imm=0) R10=fp0
; int connect_v4_prog(struct bpf_sock_addr *ctx)
0: (bf) r7 = r1 ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0)
1: (b4) w6 = 0 ; R6_w=0
; memset(&tuple.ipv4.saddr, 0, sizeof(tuple.ipv4.saddr));
...
; return do_bind(ctx) ? 1 : 0;
179: (bf) r1 = r7 ; R1=ctx(off=0,imm=0) R7=ctx(off=0,imm=0)
180: (85) call pc+147
Func#3 is global and valid. Skipping.
181: R0_w=scalar()
181: (bc) w6 = w0 ; R0_w=scalar() R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
182: (05) goto pc-129
; }
54: (bc) w0 = w6 ; R0_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
55: (95) exit
At program exit the register R0 has value (0x0; 0xffffffff) should have been in (0x0; 0x1)
processed 281 insns (limit 1000000) max_states_per_insn 1 total_states 26 peak_states 26 mark_read 13
-- END PROG LOAD LOG --
libbpf: prog 'connect_v4_prog': failed to load: -22
The corresponding source code:
__attribute__ ((noinline))
int do_bind(struct bpf_sock_addr *ctx)
{
struct sockaddr_in sa = {};
sa.sin_family = AF_INET;
sa.sin_port = bpf_htons(0);
sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
return 0;
return 1;
}
...
SEC("cgroup/connect4")
int connect_v4_prog(struct bpf_sock_addr *ctx)
{
...
return do_bind(ctx) ? 1 : 0;
}
Insn 180 is a call to 'do_bind'. The call's return value is also the return value
for the program. Since do_bind() returns 0/1, so it is legitimate for compiler to
optimize 'return do_bind(ctx) ? 1 : 0' to 'return do_bind(ctx)'. However, such
optimization breaks verifier as the return value of 'do_bind()' is marked as any
scalar which violates the requirement of prog return value 0/1.
There are two ways to fix this problem, (1) changing 'return 1' in do_bind() to
e.g. 'return 10' so the compiler has to do 'do_bind(ctx) ? 1 :0', or (2)
suggested by Andrii, marking do_bind() with __weak attribute so the compiler
cannot make any assumption on do_bind() return value.
This patch adopted adding __weak approach which is simpler and more resistant
to potential compiler optimizations.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230310012410.2920570-1-yhs@fb.com
There is a report that fib_lookup test is flaky when running in parallel.
A symptom of slowness or delay. An example:
Testing IPv6 stale neigh
set_lookup_params:PASS:inet_pton(IPV6_IFACE_ADDR) 0 nsec
test_fib_lookup:PASS:bpf_prog_test_run_opts 0 nsec
test_fib_lookup:FAIL:fib_lookup_ret unexpected fib_lookup_ret: actual 0 != expected 7
test_fib_lookup:FAIL:dmac not match unexpected dmac not match: actual 1 != expected 0
dmac expected 11:11:11:11:11:11 actual 00:00:00:00:00:00
[ Note that the "fib_lookup_ret unexpected fib_lookup_ret actual 0 ..."
is reversed in terms of expected and actual value. Fixing in this
patch also. ]
One possibility is the testing stale neigh entry was marked dead by the
gc (in neigh_periodic_work). The default gc_stale_time sysctl is 60s.
This patch increases it to 15 mins.
It also:
- fixes the reversed arg (actual vs expected) in one of the
ASSERT_EQ test
- removes the nodad command arg when adding v4 neigh entry which
currently has a warning.
Fixes: 168de02335 ("selftests/bpf: Add bpf_fib_lookup test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309060244.3242491-1-martin.lau@linux.dev
Andrii Nakryiko says:
====================
Add support for open-coded (aka inline) iterators in BPF world. This is a next
evolution of gradually allowing more powerful and less restrictive looping and
iteration capabilities to BPF programs.
We set up a framework for implementing all kinds of iterators (e.g., cgroup,
task, file, etc, iterators), but this patch set only implements numbers
iterator, which is used to implement ergonomic bpf_for() for-like construct
(see patches #4-#5). We also add bpf_for_each(), which is a generic
foreach-like construct that will work with any kind of open-coded iterator
implementation, as long as we stick with bpf_iter_<type>_{new,next,destroy}()
naming pattern (which we now enforce on the kernel side).
Patch #1 is preparatory refactoring for easier way to check for special kfunc
calls. Patch #2 is adding iterator kfunc registration and validation logic,
which is mostly independent from the rest of open-coded iterator logic, so is
separated out for easier reviewing.
The meat of verifier-side logic is in patch #3. Patch #4 implements numbers
iterator. I kept them separate to have clean reference for how to integrate
new iterator types (now even simpler to do than in v1 of this patch set).
Patch #5 adds bpf_for(), bpf_for_each(), and bpf_repeat() macros to
bpf_misc.h, and also adds yet another pyperf test variant, now with bpf_for()
loop. Patch #6 is verification tests, based on numbers iterator (as the only
available right now). Patch #7 actually tests runtime behavior of numbers
iterator.
Finally, with changes in v2, it's possible and trivial to implement custom
iterators completely in kernel modules, which we showcase and test by adding
a simple iterator returning same number a given number of times to
bpf_testmod. Patch #8 is where all this happens and is tested.
Most of the relevant details are in corresponding commit messages or code
comments.
v4->v5:
- fixing missed inner for() in is_iter_reg_valid_uninit, and fixed return
false (kernel test robot);
- typo fixes and comment/commit description improvements throughout the
patch set;
v3->v4:
- remove unused variable from is_iter_reg_valid_init (kernel test robot);
v2->v3:
- remove special kfunc leftovers for bpf_iter_num_{new,next,destroy};
- add iters/testmod_seq* to DENYLIST.s390x, it doesn't support kfuncs in
modules yet (CI);
v1->v2:
- rebased on latest, dropping previously landed preparatory patches;
- each iterator type now have its own `struct bpf_iter_<type>` which allows
each iterator implementation to use exactly as much stack space as
necessary, allowing to avoid runtime allocations (Alexei);
- reworked how iterator kfuncs are defined, no verifier changes are required
when adding new iterator type;
- added bpf_testmod-based iterator implementation;
- address the rest of feedback, comments, commit message adjustment, etc.
Cc: Tejun Heo <tj@kernel.org>
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement a trivial iterator returning same specified integer value
N times as part of bpf_testmod kernel module. Add selftests to validate
everything works end to end.
We also reuse these tests as "verification-only" tests to validate that
kernel prints the state of custom kernel module-defined iterator correctly:
fp-16=iter_testmod_seq(ref_id=1,state=drained,depth=0)
"testmod_seq" part is an iterator type, and is coming from module's BTF
data dynamically at runtime.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add number iterator (bpf_iter_num_{new,next,destroy}()) tests,
validating the correct handling of various corner and common cases
*at runtime*.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add various tests for open-coded iterators. Some of them excercise
various possible coding patterns in C, some go down to low-level
assembly for more control over various conditions, especially invalid
ones.
We also make use of bpf_for(), bpf_for_each(), bpf_repeat() macros in
some of these tests.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_for_each(), bpf_for(), and bpf_repeat() macros that make writing
open-coded iterator-based loops much more convenient and natural. These
macros utilize cleanup attribute to ensure proper destruction of the
iterator and thanks to that manage to provide the ergonomics that is
very close to C language's for() construct. Typical loop would look like:
int i;
int arr[N];
bpf_for(i, 0, N) {
/* verifier will know that i >= 0 && i < N, so could be used to
* directly access array elements with no extra checks
*/
arr[i] = i;
}
bpf_repeat() is very similar, but it doesn't expose iteration number and
is meant as a simple "repeat action N times" loop:
bpf_repeat(N) { /* whatever, N times */ }
Note that `break` and `continue` statements inside the {} block work as
expected.
bpf_for_each() is a generalization over any kind of BPF open-coded
iterator allowing to use for-each-like approach instead of calling
low-level bpf_iter_<type>_{new,next,destroy}() APIs explicitly. E.g.:
struct cgroup *cg;
bpf_for_each(cgroup, cg, some, input, args) {
/* do something with each cg */
}
would call (not-yet-implemented) bpf_iter_cgroup_{new,next,destroy}()
functions to form a loop over cgroups, where `some, input, args` are
passed verbatim into constructor as
bpf_iter_cgroup_new(&it, some, input, args).
As a first demonstration, add pyperf variant based on the bpf_for() loop.
Also clean up a few tests that either included bpf_misc.h header
unnecessarily from the user-space, which is unsupported, or included it
before any common types are defined (and thus leading to unnecessary
compilation warnings, potentially).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the first open-coded iterator type over a range of integers.
It's public API consists of:
- bpf_iter_num_new() constructor, which accepts [start, end) range
(that is, start is inclusive, end is exclusive).
- bpf_iter_num_next() which will keep returning read-only pointer to int
until the range is exhausted, at which point NULL will be returned.
If bpf_iter_num_next() is kept calling after this, NULL will be
persistently returned.
- bpf_iter_num_destroy() destructor, which needs to be called at some
point to clean up iterator state. BPF verifier enforces that iterator
destructor is called at some point before BPF program exits.
Note that `start = end = X` is a valid combination to setup an empty
iterator. bpf_iter_num_new() will return 0 (success) for any such
combination.
If bpf_iter_num_new() detects invalid combination of input arguments, it
returns error, resets iterator state to, effectively, empty iterator, so
any subsequent call to bpf_iter_num_next() will keep returning NULL.
BPF verifier has no knowledge that returned integers are in the
[start, end) value range, as both `start` and `end` are not statically
known and enforced: they are runtime values.
While the implementation is pretty trivial, some care needs to be taken
to avoid overflows and underflows. Subsequent selftests will validate
correctness of [start, end) semantics, especially around extremes
(INT_MIN and INT_MAX).
Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can
be specified.
bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded
BPF loops and bpf_loop() helper and is the basis for implementing
ergonomic BPF loops with no statically known or verified bounds.
Subsequent patches implement bpf_for() macro, demonstrating how this can
be wrapped into something that works and feels like a normal for() loop
in C language.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach verifier about the concept of the open-coded (or inline) iterators.
This patch adds generic iterator loop verification logic, new STACK_ITER
stack slot type to contain iterator state, and necessary kfunc plumbing
for iterator's constructor, destructor and next methods. Next patch
implements first specific iterator (numbers iterator for implementing
for() loop logic). Such split allows to have more focused commits for
verifier logic and separate commit that we could point later to
demonstrating what does it take to add a new kind of iterator.
Each kind of iterator has its own associated struct bpf_iter_<type>,
where <type> denotes a specific type of iterator. struct bpf_iter_<type>
state is supposed to live on BPF program stack, so there will be no way
to change its size later on without breaking backwards compatibility, so
choose wisely! But given this struct is specific to a given <type> of
iterator, this allows a lot of flexibility: simple iterators could be
fine with just one stack slot (8 bytes), like numbers iterator in the
next patch, while some other more complicated iterators might need way
more to keep their iterator state. Either way, such design allows to
avoid runtime memory allocations, which otherwise would be necessary if
we fixed on-the-stack size and it turned out to be too small for a given
iterator implementation.
The way BPF verifier logic is implemented, there are no artificial
restrictions on a number of active iterators, it should work correctly
using multiple active iterators at the same time. This also means you
can have multiple nested iteration loops. struct bpf_iter_<type>
reference can be safely passed to subprograms as well.
General flow is easiest to demonstrate with a simple example using
number iterator implemented in next patch. Here's the simplest possible
loop:
struct bpf_iter_num it;
int *v;
bpf_iter_num_new(&it, 2, 5);
while ((v = bpf_iter_num_next(&it))) {
bpf_printk("X = %d", *v);
}
bpf_iter_num_destroy(&it);
Above snippet should output "X = 2", "X = 3", "X = 4". Note that 5 is
exclusive and is not returned. This matches similar APIs (e.g., slices
in Go or Rust) that implement a range of elements, where end index is
non-inclusive.
In the above example, we see a trio of function:
- constructor, bpf_iter_num_new(), which initializes iterator state
(struct bpf_iter_num it) on the stack. If any of the input arguments
are invalid, constructor should make sure to still initialize it such
that subsequent bpf_iter_num_next() calls will return NULL. I.e., on
error, return error and construct empty iterator.
- next method, bpf_iter_num_next(), which accepts pointer to iterator
state and produces an element. Next method should always return
a pointer. The contract between BPF verifier is that next method will
always eventually return NULL when elements are exhausted. Once NULL is
returned, subsequent next calls should keep returning NULL. In the
case of numbers iterator, bpf_iter_num_next() returns a pointer to an int
(storage for this integer is inside the iterator state itself),
which can be dereferenced after corresponding NULL check.
- once done with the iterator, it's mandated that user cleans up its
state with the call to destructor, bpf_iter_num_destroy() in this
case. Destructor frees up any resources and marks stack space used by
struct bpf_iter_num as usable for something else.
Any other iterator implementation will have to implement at least these
three methods. It is enforced that for any given type of iterator only
applicable constructor/destructor/next are callable. I.e., verifier
ensures you can't pass number iterator state into, say, cgroup
iterator's next method.
It is important to keep the naming pattern consistent to be able to
create generic macros to help with BPF iter usability. E.g., one
of the follow up patches adds generic bpf_for_each() macro to bpf_misc.h
in selftests, which allows to utilize iterator "trio" nicely without
having to code the above somewhat tedious loop explicitly every time.
This is enforced at kfunc registration point by one of the previous
patches in this series.
At the implementation level, iterator state tracking for verification
purposes is very similar to dynptr. We add STACK_ITER stack slot type,
reserve necessary number of slots, depending on
sizeof(struct bpf_iter_<type>), and keep track of necessary extra state
in the "main" slot, which is marked with non-zero ref_obj_id. Other
slots are also marked as STACK_ITER, but have zero ref_obj_id. This is
simpler than having a separate "is_first_slot" flag.
Another big distinction is that STACK_ITER is *always refcounted*, which
simplifies implementation without sacrificing usability. So no need for
extra "iter_id", no need to anticipate reuse of STACK_ITER slots for new
constructors, etc. Keeping it simple here.
As far as the verification logic goes, there are two extensive comments:
in process_iter_next_call() and iter_active_depths_differ() explaining
some important and sometimes subtle aspects. Please refer to them for
details.
But from 10,000-foot point of view, next methods are the points of
forking a verification state, which are conceptually similar to what
verifier is doing when validating conditional jump. We branch out at
a `call bpf_iter_<type>_next` instruction and simulate two outcomes:
NULL (iteration is done) and non-NULL (new element is returned). NULL is
simulated first and is supposed to reach exit without looping. After
that non-NULL case is validated and it either reaches exit (for trivial
examples with no real loop), or reaches another `call bpf_iter_<type>_next`
instruction with the state equivalent to already (partially) validated
one. State equivalency at that point means we technically are going to
be looping forever without "breaking out" out of established "state
envelope" (i.e., subsequent iterations don't add any new knowledge or
constraints to the verifier state, so running 1, 2, 10, or a million of
them doesn't matter). But taking into account the contract stating that
iterator next method *has to* return NULL eventually, we can conclude
that loop body is safe and will eventually terminate. Given we validated
logic outside of the loop (NULL case), and concluded that loop body is
safe (though potentially looping many times), verifier can claim safety
of the overall program logic.
The rest of the patch is necessary plumbing for state tracking, marking,
validation, and necessary further kfunc plumbing to allow implementing
iterator constructor, destructor, and next methods.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to register kfuncs that implement BPF open-coded iterator
contract and enforce naming and function proto convention. Enforcement
happens at the time of kfunc registration and significantly simplifies
the rest of iterators logic in the verifier.
More details follow in subsequent patches, but we enforce the following
conditions.
All kfuncs (constructor, next, destructor) have to be named consistenly
as bpf_iter_<type>_{new,next,destroy}(), respectively. <type> represents
iterator type, and iterator state should be represented as a matching
`struct bpf_iter_<type>` state type. Also, all iter kfuncs should have
a pointer to this `struct bpf_iter_<type>` as the very first argument.
Additionally:
- Constructor, i.e., bpf_iter_<type>_new(), can have arbitrary extra
number of arguments. Return type is not enforced either.
- Next method, i.e., bpf_iter_<type>_next(), has to return a pointer
type and should have exactly one argument: `struct bpf_iter_<type> *`
(const/volatile/restrict and typedefs are ignored).
- Destructor, i.e., bpf_iter_<type>_destroy(), should return void and
should have exactly one argument, similar to the next method.
- struct bpf_iter_<type> size is enforced to be positive and
a multiple of 8 bytes (to fit stack slots correctly).
Such strictness and consistency allows to build generic helpers
abstracting important, but boilerplate, details to be able to use
open-coded iterators effectively and ergonomically (see bpf_for_each()
in subsequent patches). It also simplifies the verifier logic in some
places. At the same time, this doesn't hurt generality of possible
iterator implementations. Win-win.
Constructor kfunc is marked with a new KF_ITER_NEW flags, next method is
marked with KF_ITER_NEXT (and should also have KF_RET_NULL, of course),
while destructor kfunc is marked as KF_ITER_DESTROY.
Additionally, we add a trivial kfunc name validation: it should be
a valid non-NULL and non-empty string.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Factor out logic to fetch basic kfunc metadata based on struct bpf_insn.
This is not exactly short or trivial code to just copy/paste and this
information is sometimes necessary in other parts of the verifier logic.
Subsequent patches will rely on this to determine if an instruction is
a kfunc call to iterator next method.
No functional changes intended, including that verbose() warning
behavior when kfunc is not allowed for a particular program type.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 62622dab0a ("ima: return IMA digest value only when IMA_COLLECTED
flag is set") caused bpf_ima_inode_hash() to refuse to give non-fresh
digests. IMA test #3 assumed the old behavior, that bpf_ima_inode_hash()
still returned also non-fresh digests.
Correct the test by accepting both cases. If the samples returned are 1,
assume that the commit above is applied and that the returned digest is
fresh. If the samples returned are 2, assume that the commit above is not
applied, and check both the non-fresh and fresh digest.
Fixes: 62622dab0a ("ima: return IMA digest value only when IMA_COLLECTED flag is set")
Reported-by: David Vernet <void@manifault.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/bpf/20230308103713.1681200-1-roberto.sassu@huaweicloud.com
Commit 0091bfc817 ("io_uring/af_unix: defer registered
files gc to io_uring release") added one bit to struct sk_buff.
This structure is critical for networking, and we try very hard
to not add bloat on it, unless absolutely required.
For instance, we can use a specific destructor as a wrapper
around unix_destruct_scm(), to identify skbs that unix_gc()
has to special case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund says:
====================
Add support for TC flower templates in Sparx5
This adds support for the TC template mechanism in the Sparx5 flower filter
implementation.
Templates are as such handled by the TC framework, but when a template is
created (using a chain id) there are by definition no filters on this
chain (an error will be returned if there are any).
If the templates chain id is one that is represented by a VCAP lookup, then
when the template is created, we know that it is safe to use the keys
provided in the template to change the keyset configuration for the (port,
lookup) combination, if this is needed to improve the match on the
template.
The original port keyset configuration is captured in the template state
information which is kept per port, so that when the template is deleted
the port keyset configuration can be restored to its previous setting.
The template also provides the protocol parameter which is the basic
information that is used to find out which port keyset configuration needs
to be changed.
The VCAPs and lookups are slightly different when it comes to which keys,
keysets and protocol are supported and used for selection, so in some
cases a bit of tweaking is needed to find a useful match. This is done by
e.g. removing a key that prevents the best matching keyset from being
selected.
The debugfs output that is provided for a port allows inspection of the
currently used keyset in each of the VCAPs lookups. So when a template has
been created the debugfs output allows you to verify if the keyset
configuration has been changed successfully.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for using the "template add" and "template destroy"
functionality to change the port keyset configuration.
If the VCAP lookup already contains rules, the port keyset is left
unchanged, as a change would make these rules unusable.
When the template is destroyed the port keyset configuration is restored.
The filters using the template chain will automatically be deleted by the
TC framework.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this its is now possible for clients (like TC) to change the port
keyset configuration in the Sparx5 VCAPs.
This is typically done per traffic class which is guided with the L3
protocol information.
Before the change the current keyset configuration is collected in a list
that is handed back to the client.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a list that is used to collect the templates that are active on a
port.
This allows the template creation to change the port configuration
and the template destruction to change it back.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides these 3 functions in the VCAP API:
- Count the number of rules in a VCAP lookup (chain)
- Remove a key from a VCAP rule
- Find the keyset that gives the smallest rule list from a list of keysets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the name used in the debugfs output.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The line endings must be preserved on gpio-controller, io-supply, and
reset-gpios properties to look proper when the YAML file is parsed.
Currently it's interpreted as a single line when parsed. Change the style
of the description of these properties to literal style to preserve the
line endings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Transform zero-length array into flexible-array member in struct
mlx4_en_rx_desc.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:88:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:149:30: warning: array subscript 0 is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:127:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:128:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:129:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:117:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:119:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/264
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
r8169: disable ASPM during NAPI poll
This is a rework of ideas from Kai-Heng on how to avoid the known
ASPM issues whilst still allowing for a maximum of ASPM-related power
savings. As a prerequisite some locking is added first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ASPM is disabled during NAPI poll, we can remove all ASPM
restrictions. This allows for higher power savings if the network
isn't fully loaded.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bail out if the function is used with chip versions that don't support
ASPM configuration. In addition remove the delay, it tuned out that
it's not needed, also vendor driver r8125 doesn't have it.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to unlock access
to the config registers in atomic context. Other code parts
running with config register access unlocked are partially
longer and can sleep. Add a usage counter to enable parallel
execution of code parts requiring unlocked config registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access both registers
in atomic context. Use a spinlock to protect access.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access mac ocp
registers in atomic context. This could result in races because
a mac ocp read consists of a write to register OCPDR, followed
by a read from the same register. Therefore add a spinlock to
protect access to mac ocp registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Transform zero-length array into flexible-array member in struct
nx_cardrsp_rx_ctx_t.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/265
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lan95xx_config_aneg_ext() can be simplified by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/3da785c7-3ef8-b5d3-89a0-340f550be3c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enum skb_drop_reason is more generic, we can adopt it instead.
Provide dev_kfree_skb_irq_reason() and dev_kfree_skb_any_reason().
This means drivers can use more precise drop reasons if they want to.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20230306204313.10492-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>