Since we are going to introduce VFIO PCI HiSilicon ACC driver for live
migration in subsequent patches, move the ACC QM header file to a
common include dir.
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Acked-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20220308184902.2242-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Accelerator devices support runtime PM to reduce power consumption.
This patch adds the runtime PM suspend/resume callbacks to the
accelerator devices.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on the Token bucket algorithm. The HAC driver supports to configure
each function's QoS in the host. The driver supports writing QoS by the
debugfs node that named "alg_qos". The qos value is 1~1000.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports the communication between PF and VFs.
This patch enables communication between PF and VFs by writing hardware
registers, and requests an irq for communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.
This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on
Kunpeng930. This patch enables the new error types and configures the error
types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports queue doorbell isolation.
When doorbell isolation is enabled, it supports to obtain the
maximum number of queues of one function from hardware register.
Otherwise, the 'max_qp_num' is the total number of queues.
When assigning queues to VF, it is necessary to ensure that the number
of VF queues does not exceed 'max_qp_num'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes inconsistent of printing format with argument type.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to reset hardware when Corrected Error(CE) happens.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add waiting logic for resetting as removing driver,
otherwise call trace will occur due to releasing resource.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.
For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1.
'0' means ZIP is only registered to kernel crypto, and '1' means it's
registered to both kernel crypto and UACCE.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At present, as HPRE/SEC/ZIP modules' parameter 'pf_q_num' is 1,
kernel CRYPTO test will fail on the algorithms from the modules,
since 'QP' hardware resources are not enough for CRYPTO TFM.
To fix this, the minimum value of 'pf_q_num' should be 2.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.
Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.
In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
[ 293.908078] Call trace:
[ 293.908080] __queue_work+0x494/0x548
[ 293.908081] queue_work_on+0x84/0xd8
[ 293.908092] qm_irq+0x4c/0xd0 [hisi_qm]
[ 293.908096] __handle_irq_event_percpu+0x74/0x2a0
[ 293.908098] handle_irq_event_percpu+0x40/0x98
[ 293.908099] handle_irq_event+0x4c/0x80
[ 293.908101] handle_fasteoi_irq+0xb0/0x170
[ 293.908102] generic_handle_irq+0x3c/0x58
[ 293.908103] __handle_domain_irq+0x68/0xc0
[ 293.908104] gic_handle_irq+0xb4/0x298
[ 293.908105] el1_irq+0xcc/0x180
[ 293.908107] arch_cpu_idle+0x38/0x228
[ 293.908110] default_idle_call+0x20/0x40
[ 293.908113] do_idle+0x1cc/0x2b8
[ 293.908114] cpu_startup_entry+0x2c/0x30
[ 293.908115] rest_init+0xdc/0xe8
[ 293.908117] arch_call_rest_init+0x14/0x1c
[ 293.908117] start_kernel+0x490/0x4c4
This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
NOTICE: [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
NOTICE: [NimbusSecHandle]:[2319L] SecIntSt = 0x3
NOTICE: [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
NOTICE: [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!
This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.
So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.
Fixes: b67202e8ed30("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates the initialization and reset of SEC driver's
register operation.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM
for HPRE/ZIP/SEC drivers.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By configuring the device error in firmware to report through abnormal
interruption, process all NFE errors in irq handler.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Put all the code for the memory allocation into the QM initialization
process. Before, The qp memory was allocated when the qp was created,
and released when the qp was released, It is now changed to allocate
all the qp memory once.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The codes related use_dma_api is useless which should be removed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.
Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add specific states for qm and qp, every state change under critical region
to prevent from race condition. Meanwhile, qp state change will also depend
on qm state.
Due to the introduction of these states, it is necessary to pay attention
to the calls of public logic, such as concurrent scenarios resetting and
releasing queue will call hisi_qm_stop, which needs to add additional
status to distinguish and process.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the main implementation of the controller reset interface, which is
roughly divided into three parts, stop, reset, and reinitialization.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The vfs_num module parameter has been used in zip driver, this patch adds
this for HPRE and SEC driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clean the duplicate SR-IOV related codes, put all into qm.c.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We plan to move vfs_num related code into qm.c, put the param
vfs_num into struct hisi_qm first.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since SEC need not so many workqueues as our test, we just use
one workqueue created by the device driver of QM if necessary,
which will also reduce CPU waste without any throughput decreasing.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register qm to uacce framework for user crypto driver
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In error detect process, a lot of duplicate code can put into qm. We add
two callback(get_dev_hw_err_status and log_dev_hw_err) into struct
hisi_qm_err_ini to handle device error detect, meanwhile the qm error
detect not changed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The initialization and uninitialization of zip/hpre/sec/qm hardware error
is processed in respective drivers, which could be unified into qm.c. We
add struct hisi_qm_err_ini into struct hisi_qm, which involve all error
handlers of device and assignment should be done in driver probe.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently find_zip_device() finds zip device which has the min NUMA
distance with current CPU.
This patch modifies find_zip_device to return sub-optimal device when best
device has no qps. This patch sorts all devices by NUMA distance, then
finds the best zip device which has free qp.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes following sparse warning:
qm.c:345:33: warning: cast removes address space '<asn:2>' of expression
qm.c:359:20: warning: incorrect type in assignment (different base types)
qm.c:359:20: expected restricted __le16 [usertype] w0
qm.c:359:20: got int
qm.c:362:27: warning: incorrect type in assignment (different base types)
qm.c:362:27: expected restricted __le16 [usertype] queue_num
qm.c:362:27: got unsigned short [usertype] queue
qm.c:363:24: warning: incorrect type in assignment (different base types)
qm.c:363:24: expected restricted __le32 [usertype] base_l
qm.c:363:24: got unsigned int [usertype]
qm.c:364:24: warning: incorrect type in assignment (different base types)
qm.c:364:24: expected restricted __le32 [usertype] base_h
qm.c:364:24: got unsigned int [usertype]
qm.c:451:22: warning: restricted __le32 degrades to integer
qm.c:471:24: warning: restricted __le16 degrades to integer
......
qm.c:1617:19: warning: incorrect type in assignment (different base types)
qm.c:1617:19: expected restricted __le32 [usertype] dw6
qm.c:1617:19: got int
qm.c:1891:24: warning: incorrect type in return expression (different base types)
qm.c:1891:24: expected int
qm.c:1891:24: got restricted pci_ers_result_t
qm.c:1894:40: warning: incorrect type in return expression (different base types)
qm.c:1894:40: expected int
qm.c:1894:40: got restricted pci_ers_result_t
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a module parameter for zip driver to set the number of SGE in one SGL.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As HW SGL can be seen as a data format of QM's sqe, we merge sgl code into
qm module and rename it as hisi_qm, which reduces the number of module and
make the name less generic.
This patch also modify the interface of SGL:
- Create/free hisi_acc_sgl_pool inside.
- Let user to pass the SGE number in one SGL when creating sgl pool, which
is better than a unified module parameter for sgl module before.
- Modify zip driver according to sgl interface change.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HiSilicon ZIP engine driver uses debugfs to provide debug information,
the usage can be found in /Documentation/ABI/testing/debugfs-hisi-zip.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HiSilicon ZIP engine supports PCI SRIOV. This patch enable this feature.
User can enable VFs and pass through them to VM, same ZIP driver can work
in VM to provide ZLIB and GZIP algorithm by crypto acomp interface.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>