* kern/misc.c (grub_strcasecmp): New function.
(grub_strcasecmp): Use grub_size_t instead of int for length.
Fix return value.
* include/grub/misc.h: Update function prototypes.
* kern/misc.c (grub_vsprintf): Fix size and termination of `format2'
(precision) digit string. Allow `.format2' without `format1' (width).
Limit input chars for `%s' output to `format2' if specified. This is
compatible with standard printf ().
* disk/ata.c (grub_ata_wait_status): Replace by ...
(grub_ata_wait_not_busy): ... this function. Checks only BSY bit,
other status bits may be invalid while BSY is asserted.
(grub_ata_check_ready): New function.
(grub_ata_cmd): Removed.
(grub_ata_wait_drq): New function.
(grub_ata_strncpy): Remove inline.
(grub_ata_pio_read): Reduce to actual block transfer. BSY wait
and error check now done by grub_ata_wait_drq ().
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_device_initialize): Add status register check to
detect missing SATA slave devices. Add debug messages.
(grub_atapi_wait_drq): Use grub_ata_wait_not_busy ().
(grub_atapi_packet): Set DEV before check for !BSY. Replace
transfer loop by grub_ata_pio_write ().
(grub_ata_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_setaddress): Set DEV before check for !BSY.
(grub_ata_readwrite): Remove duplicate code, handle batch/rest and
read/write in one loop. Fix invalid command on write. Fix incomplete
command on (size % batch) == 0. Add missing error check after write of
last block. Add debug messages.
(grub_atapi_read): Replace transfer loop by grub_ata_pio_read ().
* disk/ata.c (GRUB_ATAPI_REG_*): New defines.
(GRUB_ATAPI_IREASON_*): Likewise.
(grub_ata_pio_write): Fix timeout error return.
(grub_atapi_identify): Add grub_ata_wait () after cmd.
(grub_atapi_wait_drq): New function.
(grub_atapi_packet): New parameter `size'.
Use grub_atapi_wait_drq () and direct write instead of
grub_ata_pio_write ().
(grub_atapi_read): Replace grub_ata_pio_read () by a loop which
reads the number of bytes requested by the device for each DRQ
assertion.
(grub_atapi_write): Remove old implementation, return not
implemented instead.
* disk/scsi.c (grub_scsi_read10): Use scsi->blocksize instead
of 512 to calculate data size.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_read): Adjust size according to blocksize.
Add checks for invalid blocksize and unaligned transfer.
* disk/ata.c (enum grub_ata_commands): Remove EXEC_DEV_DIAGNOSTICS.
(enum grub_ata_timeout_milliseconds): New enum.
(grub_ata_wait_status): Add parameter milliseconds.
(grub_ata_cmd): Remove variable `err'. Remove wait for !DRQ to allow
recovery from timed-out commands.
(grub_ata_pio_read): Add parameter milliseconds. Fix error return,
return grub_errno instead of REG_ERROR.
(grub_ata_pio_write): Add parameter milliseconds.
(grub_atapi_identify): Fix size of ATAPI IDENTIFY sector.
Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read ().
(grub_atapi_packet): Pass milliseconds to grub_ata_pio_write ().
(grub_ata_identify): Remove variable `ataerr'. Pass milliseconds to
grub_ata_wait_status (). Fix IDENTIFY timeout check.
(grub_ata_device_initialize): Remove EXECUTE DEVICE DIAGNOSTICS.
It is not suitable for device detection, because DEV bit is ignored,
the command may run too long, and not all devices set the signature
properly.
(grub_ata_pciinit): Clear grub_errno before grub_ata_device_initialize ().
(grub_ata_setaddress): Pass milliseconds to grub_ata_wait_status ().
Fix device selection, DEV bit must be set first to address the registers
of the correct device.
(grub_ata_readwrite): Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read/write ().
(grub_atapi_read): Pass milliseconds to grub_ata_pio_read ().
(grub_atapi_write): Pass milliseconds to grub_ata_pio_write ().
* conf/i386-coreboot.rmk (sbin_SCRIPTS): Add `grub-install'.
(grub_install_SOURCES): New variable.
* util/i386/pc/grub-install.in: Add a few condition checks to make it
usable on coreboot.
Fix build on powerpc-ieee1275. Based on patch created by
Manoel Abranches <mrabran@linux.vnet.ibm.com>.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/ieee1275/mmap.c'.
* include/grub/powerpc/ieee1275/memory.h: New file.
* util/grub-fstest.c (grub_term_get_current_input): Change return type
to `grub_term_input_t'.
(grub_term_get_current_output): Change return type to
`grub_term_output_t'.
Fix breakage on coreboot due to declaration missmatch.
* term/i386/pc/vga_text.c (grub_vga_text_init_fini): New function.
(grub_vga_text_term): Use grub_vga_text_init_fini() instead of
grub_vga_text_cls().
grub_machine_mmap_iterate() interface (fixes a recently-introduced
build problem on i386-ieee1275):
* kern/ieee1275/openfw.c (grub_available_iterate): Moved from here ...
* kern/ieee1275/mmap.c (grub_machine_mmap_iterate): ... here. Add third
parameter `type'. Update all users of this function.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/ieee1275/mmap.c'.
* kern/ieee1275/init.c
* include/grub/ieee1275/ieee1275.h (grub_available_iterate): Replace
with ...
(grub_machine_mmap_iterate): ... this.
* include/grub/i386/pc/memory.h (grub_machine_mmap_iterate): Change
return type to `grub_err_t'. Update all implementations of this
function prototype.
* include/grub/i386/coreboot/memory.h (grub_machine_mmap_iterate):
Likewise.
* include/grub/i386/coreboot/memory.h (GRUB_MEMORY_MACHINE_LOWER_SIZE):
Redefine to match with GRUB_MEMORY_MACHINE_UPPER_START (0x100000). We
don't want to mess with lower memory, because it is used in the Linux
loader.
* loader/i386/linux.c (allocate_pages): Allocate `real_mode_mem' in
an appropiate place in lower memory, between 0x10000 and 0x90000,
like loader/i386/efi/linux.c does. Linux often panics if real_mode_mem
is in our heap (probably as a result of it being corrupted during
decompression).
Make loader/i386/linux.c buildable on i386-pc (although disabled).
* include/grub/i386/pc/init.h: Include `<grub/machine/memory.h>'.
(struct grub_machine_mmap_entry, grub_machine_mmap_iterate): Move
from here ...
* include/grub/i386/pc/memory.h: ... to here.
Fix build problems on i386-ieee1275 and *-efi (introduced by vga_text
split).
* include/grub/i386/pc/console.h: Include `<grub/i386/vga_common.h>'.
(grub_console_cur_color, grub_console_real_putchar)
(grub_console_putchar, grub_console_getcharwidth, grub_console_getwh)
(grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): Move from here ...
* include/grub/i386/vga_common.h: ... to here (new file).
* term/i386/pc/vga_text.c: Replace `<grub/machine/console.h>' with
`<grub/i386/vga_common.h>' and `<grub/cpu/io.h>' with
`<grub/i386/io.h>'.
* term/i386/vga_common.c: Replace `<grub/machine/console.h>' with
`<grub/i386/vga_common.h>'.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `term/i386/vga_common.c'.
* conf/i386.rmk (pkglib_MODULES): Add `vga_text.mod'.
(vga_text_mod_SOURCES, vga_text_mod_CFLAGS, vga_text_mod_LDFLAGS): New
variables.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Replace
`term/i386/pc/console.c' with `term/i386/vga_common.c'.
* kern/i386/coreboot/init.c (grub_machine_init): Replace call to
grub_console_init() with call to grub_vga_text_init().
(grub_machine_fini): Replace call to
grub_console_fini() with call to grub_vga_text_fini() and
grub_at_keyboard_fini().
* include/grub/i386/pc/console.h: Include `<grub/term.h>'.
(grub_console_putchar, grub_console_getcharwidth, grub_console_getwh)
(grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): New function prototypes.
* term/i386/pc/vga_text.c: Include `<grub/dl.h>'.
(grub_vga_text_getxy, grub_vga_text_gotoxy, grub_vga_text_cls)
(grub_vga_text_setcursor): Static-ize.
(grub_vga_text_term): New structure.
(GRUB_MOD_INIT(vga_text), GRUB_MOD_FINI(vga_text)): New functions.
* term/i386/pc/console.c: Remove `<grub/machine/machine.h>'.
(grub_console_cur_color, grub_console_standard_color)
(grub_console_normal_color, grub_console_highlight_color)
(map_char, grub_console_putchar, grub_console_getcharwidth)
(grub_console_getwh, grub_console_setcolorstate, grub_console_setcolor)
(grub_console_getcolor): Move from here ...
* term/i386/vga_common.c: ... to here (same function names).
Use newly-added Multiboot support in coreboot.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Replace
`kern/i386/coreboot/mmap.c' with `kern/i386/multiboot_mmap.c'.
* kern/i386/coreboot/startup.S: Enable Multiboot header, fix its
alignment, set `MULTIBOOT_MEMORY_INFO' flag.
(codestart): Store the MBI in `startup_multiboot_info' when we're
being loaded using Multiboot.
* kern/i386/coreboot/init.c (grub_machine_init): Move
grub_at_keyboard_init() call to beginning of function (useful for
debugging). Call grub_machine_mmap_init() before attempting to use
grub_machine_mmap_iterate().
(grub_lower_mem, grub_upper_mem): Move from here ...
* kern/i386/multiboot_mmap.c (grub_lower_mem, grub_upper_mem): ... to
here (new file).
* include/grub/i386/coreboot/memory.h (grub_machine_mmap_init): New
function prototype.
Fix a regression introduced by the at_keyboard.mod split. Because
some terminals are default on some platforms and non-default on
others, the first terminal being registered determines which is
going to be default.
* kern/term.c (grub_term_register_input): If this is the first
terminal being registered, set it as the current one.
(grub_term_register_output): Likewise.
* term/efi/console.c (grub_console_init): Do not call
grub_term_set_current_output() or grub_term_set_current_input().
* term/ieee1275/ofconsole.c (grub_console_init): Likewise.
* term/i386/pc/console.c (grub_console_init): Likewise.
(grub_console_fini): Do not call grub_term_set_current_input()
(but leave grub_term_set_current_output() to restore text mode).
* term/i386/pc/vesafb.c (grub_vesafb_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* util/console.c (grub_ncurses_term): Split in ...
(grub_ncurses_term_input): ... this, and ...
(grub_ncurses_term_output): ... this. Update all users.
* include/multiboot2.h (struct multiboot_header): Add `flags' member as
per specification.
* loader/multiboot2.c (grub_multiboot2): Fix Multiboot2 header check.
* loader/multiboot_loader.c (find_multi_boot2_header): New function
(based on find_multi_boot1_header).
(grub_rescue_cmd_multiboot_loader): Check for Multiboot2 header,
using find_multi_boot2_header(), and abort if neither Multiboot or
Multiboot headers were found.
Modularize at_keyboard.mod:
* conf/i386.rmk (pkglib_MODULES): Add `at_keyboard.mod'.
(at_keyboard_mod_SOURCES, at_keyboard_mod_CFLAGS)
(at_keyboard_mod_LDFLAGS): New variables.
Actual terminal split:
* include/grub/term.h (struct grub_term): Split in ...
(struct grub_term_input): ... this, and ...
(struct grub_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/term.c (grub_term_list): Split in ...
(grub_term_list_input): ... this, and ...
(grub_term_list_output): ... this. Update all users.
(grub_cur_term): Split in ...
(grub_cur_term_input): ... this, and ...
(grub_cur_term_output): ... this. Update all users.
(grub_term_set_current): Split in ...
(grub_term_set_current_input): ... this, and ...
(grub_term_set_current_output): ... this.
(grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
(grub_term_register): Split in ...
(grub_term_register_input): ... this, and ...
(grub_term_register_output): ... this.
(grub_term_unregister): Split in ...
(grub_term_unregister_input): ... this, and ...
(grub_term_unregister_output): ... this.
(grub_term_iterate): Split in ...
(grub_term_iterate_input): ... this, and ...
(grub_term_iterate_output): ... this.
* kern/misc.c (grub_abort): Split use of grub_term_get_current() into
a check for input and one for output (and only attempt to get keys
from user when input works).
* util/grub-probe.c (grub_term_get_current): Split in ...
(grub_term_get_current_input): ... this, and ...
(grub_term_get_current_output): ... this.
* util/grub-fstest.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-editenv.c: Likewise.
Portability adjustments:
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Remove
`term/i386/pc/at_keyboard.c'.
* kern/ieee1275/init.c [__i386__] (grub_machine_init): Remove call to
grub_keyboard_controller_init() (now handled by terminal .init).
* kern/i386/coreboot/init.c (grub_machine_init): Add call to
grub_at_keyboard_init().
* include/grub/i386/ieee1275/console.h (grub_keyboard_controller_init)
(grub_console_checkkey, grub_console_getkey): Remove (now provided by
at_keyboard.mod via input terminal interface).
* include/grub/i386/coreboot/console.h: Convert into a stub for
`<grub/i386/pc/console.h>'.
Migrate full terminals to new API:
* term/efi/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
* term/ieee1275/ofconsole.c: Remove __i386__ hack.
(grub_ofconsole_init): Split into ...
(grub_ofconsole_init_input): ... this, and ...
(grub_ofconsole_init_output): ... this.
(grub_ofconsole_term): Split into ...
(grub_ofconsole_term_input): ... this, and ...
(grub_ofconsole_term_output): ... this. Update all users.
* term/i386/pc/serial.c (grub_serial_term): Split into ...
(grub_serial_term_input): ... this, and ...
(grub_serial_term_output): ... this. Update all users.
* term/i386/pc/console.c (grub_console_term): Split into ...
(grub_console_term_input): ... this, and ...
(grub_console_term_output): ... this. Update all users.
(grub_console_term_input): Only enable it on PC/BIOS platform.
(grub_console_init): Remove grub_keyboard_controller_init() call.
Migrate input terminals to new API:
* term/i386/pc/at_keyboard.c: Replace `cpu' and `machine' with
`i386' and `i386/pc' to enable build on x86_64 (this driver is
i386-specific anyway).
(grub_console_checkkey): Rename to ...
(grub_at_keyboard_checkkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_orig): New variable.
(grub_console_getkey): Rename to ...
(grub_at_keyboard_getkey): ... this. Static-ize. Update all
users.
(grub_keyboard_controller_init): Static-ize. Save original
controller value so that it can be restored ...
(grub_keyboard_controller_fini): ... here (new function).
(grub_at_keyboard_term): New structure.
(GRUB_MOD_INIT(at_keyboard), GRUB_MOD_FINI(at_keyboard)): New
functions.
Migrate output terminals to new API:
* term/i386/pc/vga.c (grub_vga_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* term/gfxterm.c (grub_video_term): Change type to
`struct grub_term_output'. Remove `.checkkey' and `.getkey'
members. Update all users.
* include/grub/i386/pc/console.h (grub_console_checkkey)
(grub_console_getkey): Do not export (no longer needed by gfxterm,
etc).
Migrate `terminal' command and userland tools to new API:
* commands/terminal.c (grub_cmd_terminal): Split into ...
(grub_cmd_terminal_input): ... this, and ...
(grub_cmd_terminal_output): ... this.
(GRUB_MOD_INIT(terminal)): Split `terminal' command in two commands:
`terminal_input' and `terminal_output'.
* util/grub.d/00_header.in: Adjust `terminal' calls to new
`terminal_input' / `terminal_output' API.
* util/grub-mkconfig.in: Export ${GRUB_TERMINAL_INPUT} and
${GRUB_TERMINAL_OUTPUT} instead of ${GRUB_TERMINAL} (and if user
provided ${GRUB_TERMINAL}, convert it).
* disk/lvm.c (grub_lvm_scan_device): Fix possible NULL value handling
(add a missing NULL check, and correct them by moving the pointer
operations after the actual check).
* disk/lvm.c (grub_lvm_scan_device): Allocate buffer space for the
circular metadata worst case scenario. If the metadata is circular
then copy the wrap in place.
* include/grub/lvm.h: Add GRUB_LVM_MDA_HEADER_SIZE, from the LVM2
project lib/format_text/layout.h
Circular metadata bug found and patch debugged by Jan Derk Gerlings.
* util/update-grub_lib.in: Copy to ...
* util/grub-mkconfig_lib.in: ... this. Update all users.
* util/update-grub_lib.in: Make it a stub to `grub-mkconfigig_lib.in'.
* util/update-grub.in: Rename to ...
* util/grub-mkconfig.in: ... this. Update all users. Remove `-y'
option. Add `--output' option to allow users to specify the generated
configuration file. Default to stdout.
(update_grub_dir): Rename to ...
(grub_mkconfig_dir): ... this.
(grub_cfg): Default to an empty string.
* conf/common.rmk (update-grub): Rename to ...
(grub-mkconfig): ... this.
(update-grub_lib): Copy to ...
(grub-mkconfig_lib): ... this.
(update-grub_SCRIPTS): Copy to ...
(grub-mkconfig_SCRIPTS): ... this. Update all users.
(update-grub_DATA): Rename to ...
(grub-mkconfig_DATA): ... this.
* fs/iso9660.c (struct grub_iso9660_primary_voldesc): Rename `created'
to `modified'. Add the real `created' field.
(grub_iso9660_uuid): Use `modified' rather than `created' for
constructing the UUID.
* disk/ata.c (grub_apapi_open): Initialize devfnd, no need to set
scsi->name and scsi->luns, as they will be set in grub_scsi_open.
* disk/scsi.c (grub_scsi_open): Don't call p->close (scsi) here when
error occurs, as grub_disk_open will call grub_disk_close, which will
call p->close (scsi).
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Skip
segments when their filesz is zero (grub_file_read() interprets
zero-size as "read untill EOF", which results in memory corruption).
Use `lowest_segment' rather than 0 for calculating the current
segment load address.
* util/hostdisk.c (open_device): Replace a grub_util_info() call
with grub_dprintf("hostdisk", ...), as it was so verbose that it
clobbered useful information.
* loader/i386/pc/multiboot.c (mmap_addr, mmap_length): Remove
variables.
(grub_multiboot): Move `mbi' allocation upwards, so that mmap address
and length can be stored directly in the `mbi->mmap_addr' and
`mbi->mmap_length' struct fields.
* fs/fshelp.c (grub_fshelp_find_file): Handle case insensitive names.
* fs/ntfs.c (list_file): Ignore names in DOS namespace, set the case
insensitive bit for names in Win32 and Win32 & DOS namespace.
* include/grub/fshelp.h (GRUB_FSHELP_CASE_INSENSITIVE): New macro.
* include/grub/types.h (LONG_MAX): Likewise.
* util/getroot.c: Include <config.h>.
(grub_util_get_grub_dev): Rewrite to use asprintf for mdraid devices,
add support for /dev/md/N devices and handle LVM double dash escaping.
* commands/i386/pc/vbeinfo.c (grub_cmd_vbeinfo): Show VBE version and
total video memory in 'vbeinfo' output; show color format details for
each video mode.
* kern/powerpc/ieee1275/crt0.S: Include grub/symbol.h and
grub/cpu/kernel.h. Add start label for consistency with other
platforms. Add grub_prefix immediately after start. Add jump
to the code after grub_prefix.
* include/grub/powerpc/kernel.h: Provide valid values for
GRUB_KERNEL_CPU_PREFIX and GRUB_KERNEL_CPU_DATA_END.
* configure.ac: Change host_os to cygwin for mingw.
(asprintf): New check for function.
* include/grub/symbol.h: Replace #ifndef __CYGWIN__ with
#if ! defined (__CYGWIN__) && ! defined (__MINGW32__).
* include/grub/util/misc.h: #include <config.h> and <grub/types.h>,
declear asprintf if HAVE_ASPRINTF is not set, declear fseeko, ftello,
sync, sleep and grub_util_get_disk_size for mingw.
* util/biosdisk.c (grub_util_biosdisk_open): Use grub_util_get_disk_size
to get size in mingw.
(open_device): Use flag O_BINARY if it's defined.
(find_root_device): Add dummy code for mingw.
* util/grub-mkdevicemap.c (get_floppy_disk_name): Return 0 for mingw.
(get_ide_disk_name): Return //./PHYSICALDRIVE%d for mingw.
(get_scsi_disk_name): Return 0 for mingw.
* util/hostfs.c: #include <grub/util/misc.h>.
(grub_hostfs_open): Use "rb" flag to open file, use
grub_util_get_disk_size to get disk size for mingw.
* util/misc.c: #include <windows.h> and <winioctl.h> in mingw.
(asprintf): New function if HAVE_ASPRINTF is not set.
(sync): New function for mingw.
(sleep): Likewise.
(grub_util_get_disk_size): Likewise.
Change find_grub_drive() syntax so it doesn't prevent it from
detecting NULL names as errors.
* util/biosdisk.c (find_grub_drive): Move free slot search code
from here ...
(find_free_slot): ... to here.
(read_device_map): Use find_free_slot() to search for free slots.
* conf/common.rmk (grub_probe_SOURCES): Add disk/mdraid_linux.c.
(grub_fstest_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c and lib/crc.c.
(pkglib_MODULES): Add raid5rec.mod, raid6rec.mod, mdraid.mod and
dm_nv.mod.
(raid5rec_mod_SOURCES): New macro.
(raid5rec_mod_CFLAGS): Likewise.
(raid5rec_mod_LDFLAGS): Likewise.
(raid6rec_mod_SOURCES): Likewise.
(raid6rec_mod_CFLAGS): Likewise.
(raid6rec_mod_LDFLAGS): Likewise.
(mdraid_mod_SOURCES): Likewise.
(mdraid_mod_CFLAGS): Likewise.
(mdraid_mod_LDFLAGS): Likewise.
(dm_nv_mod_SOURCES): Likewise.
(dm_nv_mod_CFLAGS): Likewise.
(dm_nv_mod_LDFLAGS): Likewise.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add disk/mdraid_linux.c.
(grub_emu_SOURCES): Add disk/raid5_recover.c, disk/raid6_recover.c,
disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-coreboot.rmk (grub_emu_SOURCES): Add disk/raid5_recover.c,
disk/raid6_recover.c, disk/mdraid_linux.c and disk/dmraid_nvidia.c.
* conf/i386-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/x86_64-efi.rmk (grub_emu_SOURCES): Likewise.
* conf/i386-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* disk/raid5_recover.c: New file.
* disk/raid6_recover.c: Likewise.
* disk/mdraid_linux.c: Likewise.
* disk/dmraid_nvidia.c: Likewise.
* disk/i386/pc/biosdisk.c: Set total_sectors of cdrom device to
ULONG_MAX.
* disk/raid.c (grub_raid_open): Use the size of the smallest disk to
calculate the size of raid device.
(grub_raid_read): Simplify raid0 code. Support raid4, raid6 and four
different layout of raid5.
(grub_raid_scan_device): Remove code specific to mdraid.
(grub_raid_list): New variable.
(free_array): New function.
(grub_raid_register): Likewise.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(GRUB_MOD_INIT): Don't iterate device here.
(GRUB_MOD_FINI): Use free_array to release resource.
* include/grub/raid.h: Remove macro and structure specific to mdraid.
(grub_raid5_recover_func_t): New function variable type.
(grub_raid6_recover_func_t): Likewise.
(grub_raid5_recover_func): New variable.
(grub_raid6_recover_func): Likewise.
(grub_raid_register): New function.
(grub_raid_unregister): Likewise.
(grub_raid_rescan): Likewise.
(grub_raid_block_xor): Likewise.
* util/grub-fstest.c: Add #include <grub/raid.h> and <grub/lib/crc.h>.
(CMD_CRC): New macro.
(part): Removed.
(read_file): Handle device as well as file.
(cmd_crc): New function.
(fstest): Handle multiple disks.
(options): Remove part, raw and long, add root and diskcount.
(usage): Add crc, remove -p, -r, -l, add -r and -c.
(main): Find the first non option entry and ignore subsequence options,
add handling for the new options, support multiple disks.
* util/grub-probe.c (probe): Add mdraid to abstraction_name.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `kern/i386/pc/mmap.c'.
* include/grub/i386/pc/init.h (GRUB_MACHINE_MEMORY_AVAILABLE)
(GRUB_MACHINE_MEMORY_RESERVED): New macros.
(grub_machine_mmap_iterate): New function declaration.
* include/grub/multiboot.h (struct grub_multiboot_mmap_entry): New
structure.
(GRUB_MMAP_MEMORY_AVAILABLE, GRUB_MMAP_MEMORY_RESERVED): New
macros.
* kern/i386/pc/init.c (grub_machine_init): Replace hardcoded region
type check value with `GRUB_MACHINE_MEMORY_AVAILABLE'.
Move e820 parsing from here ...
* kern/i386/pc/mmap.c: New file.
(grub_machine_mmap_iterate): ... to here.
* include/grub/i386/coreboot/memory.h: Remove `<grub/err.h>'.
(GRUB_LINUXBIOS_MEMORY_AVAILABLE): Rename (for consistency) to ...
(GRUB_MACHINE_MEMORY_AVAILABLE): ... this. Update all users.
(grub_available_iterate): Redeclare to return `void', and redeclare
its hook to use grub_uint64_t as addr and size parameters, and rename
to ...
(grub_machine_mmap_iterate): ... this. Update all users.
* kern/i386/coreboot/mmap.c (grub_mmap_iterate): Simplify parser loop
to make it more readable. Rename to ...
(grub_machine_mmap_iterate): ... this.
* loader/i386/pc/multiboot.c (mmap_addr, mmap_length): New variables.
(grub_get_multiboot_mmap_len, grub_fill_multiboot_mmap): New functions.
(grub_multiboot): Allocate an extra region after the payload, and fill
it with a Multiboot memory map. Adjust a.out loader to calculate size
with the extra space.
(grub_multiboot_load_elf32): Adjust elf32 loader to calculate size
with the extra space.
* include/grub/err.h (grub_err_printf): New function prototype.
* util/misc.c (grub_err_printf): New function.
* kern/misc.c [! GRUB_UTIL] (grub_err_printf): New alias for
grub_printf.
* kern/err.c (grub_print_error): Use grub_err_printf.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Move part
of the relocation code from here ...
(grub_multiboot): ... to here.
(forward_relocator, backward_relocator): Move from here ...
* kern/i386/loader.S (grub_multiboot_forward_relocator)
(grub_multiboot_backward_relocator): ... to here.
(grub_multiboot_real_boot): Use %edx for entry offset. Put Multiboot
magic in %eax. Use %ebp for jumping (so %edx is not trashed).
* include/grub/i386/loader.h (grub_multiboot_forward_relocator)
(grub_multiboot_forward_relocator_end)
(grub_multiboot_backward_relocator)
(grub_multiboot_backward_relocator_end): New variables.
* kern/i386/linuxbios/startup.S: Move from here ...
* kern/i386/coreboot/startup.S: ... to here.
* kern/i386/linuxbios/init.c: Move from here ...
* kern/i386/coreboot/init.c: ... to here.
* kern/i386/linuxbios/table.c: Move from here ...
* kern/i386/coreboot/mmap.c: ... to here.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Update moved files.
* Makefile.in: Add `target_os' and `enable_grub_pe2elf'.
* conf/common.rmk: Install `grub-pe2elf' only if requested.
Install `grub.d/10_windows' only on Cygwin.
* configure.ac: Add subst of `target_os'.
Check `target_os' also before setting TARGET_OBJ2ELF.
Add `--enable-grub-pe2elf'.
* kern/disk.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(grub_last_time): Change type to grub_uint64_t.
(grub_disk_open): Migrate code from to using grub_get_time_ms().
(grub_disk_close): Likewise.
* normal/menu.c: Replace `<grub/machine/time.h>' with `<grub/time.h>'.
(run_menu): Migrate code from to using grub_get_time_ms().
* util/misc.c (grub_get_time_ms): New function.
* disk/ata.c (grub_ata_regget): Change return type to
`grub_uint8_t'.
(grub_ata_regget2): Likewise.
(grub_ata_wait_status): New function.
(grub_ata_wait_busy): Removed function, updated all users to use
`grub_ata_wait_status'.
(grub_ata_wait_drq): Likewise.
(grub_ata_cmd): New function.
(grub_ata_pio_read): Change return type to `grub_uint8_t'. Add
error handling.
(grub_ata_pio_write): Add error handling.
(grub_atapi_identify): Likewise.
(grub_atapi_packet): Use `grub_ata_cmd' and improve error
handling.
(grub_ata_identify): Use `grub_ata_cmd' and improve error
handling. Actually use the detected registers. Reorder the
detection logic such that it is easier to read.
(grub_ata_pciinit): Do not assign the same ID to each controller.
(grub_ata_setaddress): Use `grub_ata_cmd' and improve error
handling.
(grub_atapi_readsector): Check the result of `grub_ata_pio_read'.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_TIMEOUT'.
* kern/i386/pit.c (TIMER2_SPEAKER): New define.
(TIMER2_GATE): Likewise.
(grub_pit_wait): Add enable/disable of the timer2 gate
bit of port 0x61. This fixes a possible infinite loop.
* fs/i386/pc/pxe.c (grub_pxe_data): New member block_size.
(grub_pxefs_fs_int): Remove dummy definition.
(grub_pxefs_open): Use data->block_size to store the current block
size setting.
(grub_pxefs_read): Use block size stored in data->block_size. As the
value of grub_pxe_blksize can be changed after the file is opened.
* fs/i386/pc/pxe.c (curr_file): new variable.
(grub_pxefs_open): Simply the handling of pxe file system. Don't
require the dummy internal file system anymore.
(grub_pxefs_read): Removed.
(grub_pxefs_close): Likewise.
(grub_pxefs_fs_int): Likewise.
(grub_pxefs_read_int): Renamed to grub_pxefs_read. Reinitialize tftp
connection when we switch file.
(grub_pxefs_close_int): Renamed to grub_pxefs_close.
* util/console.c (grub_console_cur_color): New variable.
(grub_console_standard_color): Likewise.
(grub_console_normal_color): Likewise.
(grub_console_highlight_color): Likewise.
(color_map): Likewise.
(use_color): Likewise.
(NUM_COLORS): New macro.
(grub_ncurses_setcolorstate): Handle color properly.
(grub_ncurses_setcolor): Don't change color here, just remember the
settings, color will be set in grub_ncurses_setcolorstate.
(grub_ncurses_getcolor): New function.
(grub_ncurses_init): Initialize color pairs.
(grub_ncurses_term): New member grub_ncurses_getcolor.
High resolution timer support. Implemented for x86 CPUs using TSC.
Extracted generic grub_millisleep() so it's linked in only as needed.
This requires a Pentium compatible CPU; if the RDTSC instruction is
not supported, then it falls back on the generic grub_get_time_ms()
implementation that uses the machine's RTC.
* conf/i386-pc.rmk (kernel_img_SOURCES): Add `kern/time.c',
`kern/i386/tsc.c', `kern/generic/rtc_get_time_ms.c' and
`kern/generic/millisleep.c'.
* conf/i386-efi.rmk (kernel_mod_SOURCES): Add `kern/i386/tsc.c',
`kern/generic/rtc_get_time_ms.c' and `kern/generic/millisleep.c'.
* conf/x86_64-efi.rml (kernel_mod_SOURCES): Add
`kern/generic/millisleep.c' and `kern/generic/rtc_get_time_ms.c'.
* conf/sparc64-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Add
`kern/generic/millisleep.c'.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* conf/i386-coreboot.rmk (kernel_elf_SOURCES): Add `kern/time.c'.
* kern/generic/rtc_get_time_ms.c: New file.
* kern/generic/millisleep.c: New file.
* kern/misc.c: Don't include
<kern/time.h> anymore.
(grub_millisleep_generic): Removed.
* commands/sleep.c (grub_interruptible_millisleep): Uses
grub_get_time_ms() instead of grub_get_rtc().
* include/grub/i386/tsc.h (grub_get_tsc): New file. New inline
function.
(grub_cpu_is_cpuid_supported): New inline function.
(grub_cpu_is_tsc_supported): New inline function.
(grub_tsc_init): New function prototype.
(grub_tsc_get_time_ms): New function prototype.
* kern/i386/tsc.c (grub_get_time_ms): New file.
* include/grub/time.h: Include <grub/types.h.
(grub_millisleep_generic): Removed.
(grub_get_time_ms): New prototype.
(grub_install_get_time_ms): New prototype.
(grub_rtc_get_time_ms): New prototype.
* kern/time.c (grub_get_time_ms): New function.
(grub_install_get_time_ms): New function.
* kern/i386/efi/init.c: Include <grub/cpu/tsc.h>. Don't include
<grub/time.h> anymore.
(grub_millisleep): Removed.
(grub_machine_init): Call grub_tsc_init.
* kern/i386/linuxbios/init.c (grub_machine_init): Install the RTC
get_time_ms() implementation.
* kern/sparc64/ieee1275/init.c (grub_millisleep): Removed.
(ieee1275_get_time_ms): New function.
(grub_machine_init): Install get_time_ms() implementation.
* kern/i386/pc/init.c: Include <grub/cpu/tsc.h>.
(grub_machine_init): Call grub_tsc_init().
(grub_millisleep): Removed.
* kern/ieee1275/init.c (grub_millisleep): Removed.
(grub_machine_init): Install ieee1275_get_time_ms()
implementation.
(ieee1275_get_time_ms): New function.
(grub_get_rtc): Now calls ieee1275_get_time_ms(), which does the
real work.
* util/grub.d/00_header.in: Be platform-agnostic. Probe for existence
of modules instead of assuming which platform provides what.
* util/update-grub.in: Likewise.
* kern/i386/pc/init.c (make_install_device): Check for `grub_prefix'
instead of `grub_install_dos_part' to determine whether a drive needs
to be prepended to prefix (`grub_install_dos_part' is not reliable,
because it can be overriden when loading GRUB via Multiboot).
* disk/memdisk.c (memdisk_size): Don't initialize.
(GRUB_MOD_INIT(memdisk)): Find memdisk using grub_module_iterate().
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): Remove macro.
(GRUB_KERNEL_MACHINE_PREFIX, GRUB_KERNEL_MACHINE_DATA_END): Shift.
(grub_memdisk_image_size, grub_arch_memdisk_addr)
(grub_arch_memdisk_size): Remove.
* include/grub/kernel.h (struct grub_module_header): Remove `offset'
field (was only used to transfer a constant). Add `type' field to
support multiple module types.
(grub_module_iterate): New function.
* kern/device.c (grub_device_open): Do not hide error messages
when grub_disk_open() fails. Use grub_print_error() instead.
* kern/i386/pc/init.c (grub_arch_modules_addr)
(grub_arch_memdisk_size): Remove functions.
(grub_arch_modules_addr): Return the module address in high memory
(now that it isn't copied anymore).
* kern/i386/pc/startup.S (grub_memdisk_image_size): Remove variable.
(codestart): Don't add grub_memdisk_image_size to %ecx in LZMA
decompression routine (grub_total_module_size already includes that
now). Don't copy modules back to low memory.
* kern/main.c: Include `<grub/mm.h>'.
(grub_load_modules): Split out (and use) ...
(grub_module_iterate): ... this function, which iterates through
module objects and runs a hook.
Comment out grub_mm_init_region() call, as it would cause non-ELF
modules to be overwritten.
* util/i386/pc/grub-mkimage.c (generate_image): Instead of appending
the memdisk image in its own region, make it part of the module list.
* util/elf/grub-mkimage.c (options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
(add_segments): Pass `memdisk_path' down to load_modules().
(load_modules): Embed memdisk image in module section when requested.
* util/i386/efi/grub-mkimage.c (make_mods_section): Initialize
`header.type' instead of `header.offset'.
* conf/powerpc-ieee1275.rmk (pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES, memdisk_mod_CFLAGS)
(memdisk_mod_LDFLAGS): New variables.
* conf/i386-coreboot.rmk: Likewise.
* conf/i386-ieee1275.rmk: Likewise.
* loader/i386/pc/multiboot.c (playground, forward_relocator)
(backward_relocator): New variables. Used to allocate and relocate
the payload, respectively.
(grub_multiboot_load_elf32): Load into heap instead of requested
address, install the appropiate relocator code in each bound of
the payload, and set the entry point such that
grub_multiboot_real_boot() will jump to one of them.
* kern/i386/loader.S (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): New variables.
(grub_multiboot_real_boot): Set cpu context to what the relocator
expects, and jump to the relocator instead of the payload.
* include/grub/i386/loader.h (grub_multiboot_payload_size)
(grub_multiboot_payload_orig, grub_multiboot_payload_dest)
(grub_multiboot_payload_entry_offset): Export.
* conf/common.rmk (pkglib_MODULES): Add bufio.mod.
(bufio_mod_SOURCES): New macro.
(bufio_mod_CFLAGS): Likewise.
(bufio_mod_LDFLAGS): Likewise.
* include/grub/bufio.h: New file.
* io/bufio.c: Likewise.
* video/png.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_png): Use grub_buffile_open to open file.
* video/jpeg.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_jpeg): Use grub_buffile_open to open file.
* video/tga.c: Replace <grub/file.h> with <grub/bufio.h>.
(grub_video_reader_tga): Use grub_buffile_open to open file.
* font/manager.c: Include <grub/bufio.h>.
(add_font): Use grub_buffile_open to open file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): When loading
ELF segments, use a macro for arbitrarily accessing any of them instead
of preparing a pointer that allows access to one at a time.
(grub_multiboot_load_elf64): Likewise.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_DATA_END):
Increase from 0x50 to 0x60.
* util/i386/pc/grub-install.in: Detect cross-disk installs, and
use UUIDs to identify the root drive for them. If that's not
possible, abort.
* util/i386/pc/grub-setup.c (setup): Do not special-case, or even
check, for cross-disk installs.
* kern/ieee1275/init.c (grub_machine_set_prefix): If `grub_prefix'
is non-empty, use it to set the `prefix' environment variable instead
of the usual approach.
* kern/i386/linuxbios/init.c (make_install_device): Remove function.
(grub_machine_set_prefix): Use `grub_prefix' to set the `prefix'
environment variable instead of dummy make_install_device().
* kern/i386/ieee1275/startup.S: Include `<grub/machine/kernel.h>'.
(start): Insert a data section, with `grub_prefix' variable.
* kern/i386/linuxbios/startup.S: Likewise.
* include/grub/powerpc/ieee1275/kernel.h [!ASM_FILE] (grub_prefix):
New variable reference.
* include/grub/i386/ieee1275/kernel.h (GRUB_KERNEL_MACHINE_PREFIX):
New macro. Defines offset of `grub_prefix' within startup.S (relative
to `start').
(GRUB_KERNEL_MACHINE_DATA_END): New macro. Defines the end of data
section within startup.S (relative to `start').
* include/grub/i386/coreboot/kernel.h: Likewise.
* util/elf/grub-mkimage.c (add_segments): Receive `prefix' parameter.
Overwrite grub_prefix with its contents, at the beginning of the
first segment.
(main): Understand -p|--prefix.
* term/i386/pc/vga_text.c (grub_console_cls): Use
grub_console_gotoxy() to go back to beginning of the screen.
Found by Patrick Georgi <patrick.georgi@coresystems.de>
* util/update-grub.in: Add a check for admin
group on Cygwin.
Remove old `grub.cfg.new' before creation.
Add `-f' to `mv' to handle the different filesystem
semantics of Windows.
* partmap/apple.c (GRUB_APPLE_HEADER_MAGIC): New macro.
(struct grub_apple_header): New struct. Describes the layout of
the partmap header.
(apple_partition_map_iterate): Check the header magic as well as the
partition magic (which was already being checked).
* disk/raid.c (grub_raid_scan_device): Do not abort when two disks
with the same number are found, just use issue a warning with
grub_dprintf(), as this error has been reported to be non-fatal.
* fs/xfs.c (grub_xfs_dir_header): Change field i8count back to
smallino, as it's more descriptive, and i8count can be confused with
the other field count.
(grub_xfs_iterate_dir): Adjust grub_xfs_dir_entry pointer for small
inode type.
* util/getroot.c (find_root_device): Skip devices that match
/dev/dm-[0-9]. This lets the real device be found for any type of
abstraction (LVM, EVMS, RAID..).
(grub_guess_root_device): Do not traverse /dev/mapper (for LVM)
and /dev/evms (for EVMS) before traversing /dev. If a /dev/dm-[0-9]
device is found first, find_root_device() will now skip it.
* util/i386/pc/grub-install.in: If `--debug' is specified,
pass `--verbose' to grub-setup.
Abort script if make_system_path_relative_to_its_root() fails.
* common.rmk (bin_UTILITIES): Add grub-pe2elf.
(grub_pe2elf_SOURCES): New macro.
(CLEANFILES): Add grub-pe2elf.
* include/grub/efi/pe32.h (GRUB_PE32_SCN_ALIGN_1BYTES): New constant.
(GRUB_PE32_SCN_ALIGN_2BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_4BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_8BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_16BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_32BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_64BYTES): Likewise.
(GRUB_PE32_SCN_ALIGN_SHIFT): Likewise.
(GRUB_PE32_SCN_ALIGN_MASK): Likewise.
(GRUB_PE32_SYM_CLASS_EXTERNAL): Likewise.
(GRUB_PE32_SYM_CLASS_STATIC): Likewise.
(GRUB_PE32_SYM_CLASS_FILE): Likewise.
(GRUB_PE32_DT_FUNCTION): Likewise.
(GRUB_PE32_REL_I386_DIR32): Likewise.
(GRUB_PE32_REL_I386_REL32): Likewise.
(grub_pe32_symbol): New structure.
(grub_pe32_reloc): Likewise.
* util/grub-pe2elf.c: New file.
* configure.ac: Set TARGET_OBJ2ELF if host os is cygwin. Don't test for
start symbol in non pc platform.
* genmk.rb: Use TARGET_OBJ2ELF to convert native object format to elf.
The following patches are from Christian Franke.
* include/grub/dl.h: Remove .previous, gas supports this only
for ELF format.
* include/grub/symbol.h [__CYGWIN__] (#define FUNCTION/VARIABLE):
Remove .type, gas supports this only for ELF format.
* kern/dl.c (grub_dl_resolve_dependencies): Add check for trailing
nullbytes in symbol table. This fixes an infinite loop if table is
zero filled.
* Makefile.in: Add autoconf replacements TARGET_IMG_LDSCRIPT,
TARGET_IMG_LDFLAGS and EXEEXT.
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Replace -Wl,-N by
TARGET_IMG_LDFLAGS_AC.
(grub_CHECK_STACK_ARG_PROBE): New function.
* conf/i386-pc.rmk: Replace -Wl,-N by TARGET_IMG_LDFLAGS.
* conf/i386-pc-cygwin-ld-img.sc: New linker script.
* configure.ac: Add check for linker script "conf/${target}-img-ld.c"
to set TARGET_IMG_LD* accordingly.
Add check for Cygwin to set TARGET_MOD_OBJCOPY accordingly.
Add call to grub_CHECK_STACK_ARG_PROBE.
Use TARGET_IMG_LDFLAGS to check start, bss_start, end symbols.
* genkernsyms.sh.in: Handle HAVE_ASM_USCORE case.
* genmk.rb: Add EXEEXT to CLEANFILES.
* Makefile.in (UNICODE_ARROWS, UNICODE_LINES): New variables (they
define the codes for arrows and lines used for the menu).
(ascii.pff): Generate fonts for $(UNICODE_ARROWS) and $(UNICODE_LINES)
as well.
* util/update-grub_lib.in (font_path): Prefer ascii.pff over complete
fonts, because the latter are too slow.
* kern/dl.c: Go back to using GRUB_CPU_SIZEOF_VOID_P. We cannot
load foreign architecture modules correctly anyway. Keep
support for loading host architecture modules, whether we
compile them or not.
* aclocal.m4 (grub_PROG_TARGET_CC): New macro. Check if the
target compiler is functional.
* configure.ac: Call grub_PROG_TARGET_CC once all target flags
are set up.
* configure.ac: Default to efi platform for x86_64-apple. Allow
powerpc64 CPU, default to ieee1275 platform for it. Split CPU
adjustments from the rest, only do them if target is not
explicitly given. Merge other adjustments with the final sanity
check. Remove an extraneous check for supported CPU. Be
specific which CPU and which platform is not supported.
* util/i386/efi/grub-mkimage.c (get_target_address): Return a
pointer, not an integer. This fixes a warning and prevents
precision loss on 64-bit systems.
(relocate_addresses): Remove unneeded cast.
* util/grub.d/40_custom.in: New file. Example on how to add custom
entries to /etc/grub.d.
* conf/common.rmk (%, update-grub_SCRIPTS, CLEANFILES): Install
40_custom (implicitly, by merging all the grub.d rules).
* term/i386/pc/serial.c (GRUB_SERIAL_PORT_NUM): New constant.
[!GRUB_MACHINE_PCBIOS] (serial_hw_io_addr): Add COM2 and COM3.
(serial_hw_get_port): Check validity of the port number.
(grub_cmd_serial): Check return value of serial_hw_get_port().
* boot/i386/pc/diskboot.S (notification_string): Replace
"Loading kernel" with just "loading". This is shorter, less
confusing and saves a few bytes for possible future changes.
* kern/i386/linuxbios/init.c (grub_machine_init): Cast addr to
grub_addr_t before casting it to the void pointer to fix a
warning. Non-addressable regions are discarded earlier.
(grub_arch_modules_addr): Cast _end to grub_addr_t.
* kern/i386/linuxbios/table.c: Include grub/misc.h.
(check_signature): Don't shadow table_header.
(grub_linuxbios_table_iterate): Cast numeric constants to
grub_linuxbios_table_header_t.
* include/grub/i386/linuxbios/init.h: Add noreturn attribute to
grub_stop().
This fixes a performance issue when pc & gpt partmap iterators
didn't abort iteration even after our hook found what it was
looking for (often causing expensive probes of non-existant drives).
Some callers relied on previous buggy behaviour, since they would
rise an error when their own hooks caused early abortion of its
iteration.
* kern/device.c (grub_device_open): Improve error message.
* disk/lvm.c (grub_lvm_open): Likewise.
* disk/raid.c (grub_raid_open): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(pc_partition_map_probe): Do not fail when find_func() caused
early abortion of pc_partition_map_iterate().
* partmap/gpt.c (gpt_partition_map_iterate): Abort parent iteration
when hook requests it, independently of grub_errno.
(gpt_partition_map_probe): Do not fail when find_func() caused
early abortion of gpt_partition_map_iterate().
* kern/partition.c (grub_partition_iterate): Abort parent iteration
when hook requests it, independently of grub_errno. Do not fail when
part_map_iterate_hook() caused early abortion of p->iterate().
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Do not fail
when grub_partition_iterate() returned with non-zero.
* disk/ata.c (grub_ata_pio_write): Check status before writing,
like we do in grub_ata_pio_read().
(grub_ata_readwrite): Always write individual sectors. Fix the
sector count for the remainder.
(grub_ata_write): Enable writing to ATA devices. Correctly
report error for ATAPI devices.
* disk/ata.c (grub_ata_readwrite): Don't increment sector number
for every read sector, we already increment it for the whole
batch. This fixes reading more than 256 sectors at once.
* Makefile.in (MODULE_LDFLAGS): New variable.
* aclocal.m4 (grub_PROG_LD_BUILD_ID_NONE): New macro. Check if
the linker accepts --build-id=none.
* configure.ac: Call grub_PROG_LD_BUILD_ID_NONE. Substitute
MODULE_LDFLAGS.
* genmk.rb: Use MODULE_LDFLAGS when linking modules.
* fs/xfs.c (struct grub_xfs_dir_header): Use names similar to
those in Linux XFS code. Provide a way to access 64-bit parent
inode.
(grub_xfs_iterate_dir): Use the new names. Avoid reading past
the end of struct grub_xfs_dir_header.
* include/grub/ieee1275.h (grub_ieee1275_flag): New constant
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI.
* kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set flag
GRUB_IEEE1275_FLAG_CANNOT_INTERPRET, GRUB_IEEE1275_FLAG_FORCE_CLAIM
and GRUB_IEEE1275_FLAG_NO_ANSI for Open Hackware.
* kern/ieee1275/ieee1275.c (grub_ieee1275_interpret): Return
immediately if GRUB_IEEE1275_FLAG_CANNOT_INTERPRET is set.
* kern/ieee1275/init.c (grub_claim_heap): Claim memory directly if
GRUB_IEEE1275_FLAG_FORCE_CLAIM is set.
* term/ieee1275/ofconsole.c (grub_ofconsole_writeesc): Don't output
esc sequence on non ANSI terminal.
(grub_ofconsole_gotoxy): Emulate backspace key on non ANSI terminal.
* util/elf/grub-mkimage.c (add_segments): Move ELF header to the
beginning of file.
* disk/raid.c: Cast grub_dprintf() arguments to unsigned long
long if the format specifier expects it.
* partmap/gpt.c (gpt_partition_map_iterate): Likewise.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* fs/ntfs.c (grub_ntfs_uuid): Cast data->uuid to unsigned long
long to fix a warning.
* fs/reiserfs.c (grub_reiserfs_read): Change casts in
grub_dprintf() arguments to fix warnings.
* util/i386/pc/grub-setup.c (setup): Write install_dos_part and
install_bsd_part immediately before core.img is embedded or
modified on disk. This fixes core.img verification if core.img
cannot be embedded.
* fs/xfs.c (GRUB_XFS_FSB_TO_BLOCK): New macro. Maps filesystem
block to disk block.
(grub_xfs_read_block): Use GRUB_XFS_FSB_TO_BLOCK() on result.
Patch from Niels B\303\266hm <bitbucket@arcor.de>
* util/update-grub_lib.in (font_path): Search for fonts in
/boot/grub first, which is more likely to be readable (we aren't
deciding where fonts live, just looking for them).
* util/grub.d/10_linux.in: Avoid passing UUIDs to Linux when either
"/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" does not exist, or when a
Linux image includes no initrd.
* util/grub.d/00_header.in: Move last prepare_grub_to_access_device()
call from here ...
* util/grub.d/10_hurd.in: ... to here ...
* util/grub.d/10_linux.in: ... and here.
* commands/search.c (search_label, search_fs_uuid, search_file): Print
search result when not saving to variable, not the other way around.
When saving to variable, abort iteration as soon as a match is found.
* util/update-grub_lib.in (prepare_grub_to_access_device): Remove
check for partition that provides /boot/grub. Its logic is flawed,
as it prevents prepare_grub_to_access_device() from being called
multiple times.
* util/update-grub_lib.in (prepare_grub_to_access_device): Issue
"insmod" command directly when abstraction modules are needed,
instead of reliing on GRUB_PRELOAD_MODULES (which had no effect
since it had already been processed).
* conf/i386-efi.rmk: Recompile grub-mkimage.c if Makefile has
changed. This is needed in case GRUB_LIBDIR changes.
* conf/i386-ieee1275.rmk: Likewise.
* conf/i386-linuxbios.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/powerpc-ieee1275.rmk (kernel_elf_SOURCES): Rename
kernel_elf_symlist.c to symlist.c for consistency with other
architectures. Update all users.
* conf/sparc64-ieee1275.rmk (kernel_elf_SOURCES): Likewise.
* util/i386/pc/grub-install.in: If the drive is LVM or RAID, prepend
it in prefix.
* util/i386/pc/grub-setup.c (main): Don't handle prefix at all. Set
`must_embed' to 1 when root_dev is a RAID device. When dest_dev is
a RAID device, run setup() for all members independently on whether
LVM abstraction is being used.
(setup): Don't handle prefix at all; let grub-mkimage take care of it.
If grub-mkimage has set `*install_dos_part == -2', don't override this
value.
Perform *install_dos_part adjustments independently on whether
we're embedding or not.
Clarify error message when image is too big for embedding.
Remove duplicate *install_dos_part stanza.
* term/ieee1275/ofconsole.c (fgcolor, bgcolor): Remove variables.
(grub_ofconsole_normal_color, grub_ofconsole_highlight_color): New
variables.
(grub_ofconsole_setcolor, grub_ofconsole_getcolor): Load/store
values in grub_ofconsole_normal_color and
grub_ofconsole_highlight_color (they're not directly related to
background and foreground).
(grub_ofconsole_setcolorstate): Extract background and foreground
from grub_ofconsole_normal_color and grub_ofconsole_highlight_color.
* util/update-grub_lib.in (prepare_grub_to_access_device): Use
/boot/grub for the check in last commit, not /boot (they could be
different partitions).
* util/update-grub_lib.in (prepare_grub_to_access_device): If we were
asked to setup access for the same partition that provides /boot,
don't bother using UUIDs since our root already has the value we
want.
* commands/ls.c (grub_ls_list_files): Use integer calculations
for human readable format, avoid floating point use.
* kern/misc.c (grub_ftoa): Remove.
(grub_vsprintf): Remove floating point support.
* util/i386/pc/grub-mkimage.c (generate_image): If we included a drive
in our prefix, set install_{dos,bsd}_part = -2 to indicate this can be
skipped later.
(main): If a memdisk was requested, add "(memdisk)" drive explicitly to
the beginning of the prefix.
* kern/i386/pc/init.c (make_install_device): Remove memdisk check.
It is assumed that if we have a memdisk, grub-mkimage has set
grub_prefix to include the "(memdisk)" drive in it.
* term/i386/pc/console.c [GRUB_MACHINE_LINUXBIOS] (grub_console_init):
Initialize keyboard controller after registering the terminal, so that
grub_printf() can be called from grub_keyboard_controller_init().
* fs/sfs.c (grub_sfs_read_extent): Fix the count of nodes in
extent-btree which is written as big endian on disk.
Reported by Alain Greppin <al@chilibi.org>.
* fs/fshelp.c (grub_fshelp_read): New function. Implement
linear disk read with journal translation.
* fs/ext2.c: Use grub_fshelp_read() instead of grub_disk_read().
* include/grub/fshelp.h: Declare grub_fshelp_read().
Based on description from Pavel:
* kern/disk.c (grub_disk_check_range): Rename to ...
(grub_disk_adjust_range): ... this. Add a comment explaining the
tasks performed by this function.
* util/biosdisk.c (open_device): Revert last change to the
function, it broke installation. The sector needs to be
different dependent on which device is opened.
Ensure GRUB_KERNEL_MACHINE_DATA_END is always consistent with the
rest of GRUB, and breakage doesn't happen if its value were modified.
* include/grub/i386/pc/kernel.h (GRUB_KERNEL_MACHINE_RAW_SIZE):
Redefine as an offset from `GRUB_KERNEL_MACHINE_DATA_END' instead of
a constant (same value).
* kern/i386/pc/startup.S: Replace hardcoded `0x50' with
`GRUB_KERNEL_MACHINE_DATA_END' (same value).
* util/grub-emu.c (grub_machine_init): Move code in this function from
here ...
(main): ... to here (before grub_util_biosdisk_init() call, to prevent
segfault in case grub_printf() is called).
* util/i386/pc/grub-install.in: Append `--device-map=${device_map}' to
grub_probe. Update all users not to explicitly add it again.
(grub_device): New variable; contains corresponding device for grubdir.
(fs_module, partmap_module, devabstraction_module): Pass
`--device ${grub_device}' to grub_probe to avoid traversing /dev
every time.
* util/biosdisk.c (get_drive): Verify that `map[i].drive' is non-NULL
before dereferencing it.
* fs/fat.c (struct grub_fat_bpb): Move fat32-specific fields into a
union with fat12/fat16-specific ones. Add some new fields, including
`num_serial' for both versions.
(struct grub_fat_data): Add `uuid' member.
(grub_fat_mount): Refer to fat32-specific fields in `bpb' by their new
names. Initialize `data->uuid' using `num_serial'.
(grub_fat_uuid): New function.
(grub_fat_fs): Reference grub_fat_uuid() in `uuid' struct member.
* fs/reiserfs.c (grub_reiserfs_superblock): Add `uuid' field.
(grub_reiserfs_uuid): New function.
(grub_reiserfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct
member.
* fs/xfs.c (grub_xfs_sblock): Add `uuid' field.
(grub_xfs_uuid): New function.
(grub_xfs_fs): Reference grub_reiserfs_uuid() in `uuid' struct member.
* disk/i386/pc/biosdisk.c (grub_biosdisk_iterate): Iterate through
floppies after everything else, to ensure floppy drive isn't accessed
unnecessarily (patch from Bean).
* term/ieee1275/ofconsole.c (grub_ofconsole_setcursor): Implement
using "cursor-on" and "cursor-off" commands (understood at least by
the Open Firmware flavour on OLPC).
* util/biosdisk.c (linux_find_partition): Simplify logic and
make the code more universal. Keep special processing for
devfs, but use a simple rule for all other devices. If the
device ends with a number, append 'p' and the partition number.
Otherwise, append only the partition number.
* util/update-grub.in (GRUB_DISABLE_LINUX_UUID): Export variable.
* util/grub.d/10_linux.in: If GRUB_DEVICE_UUID is set, and
GRUB_DISABLE_LINUX_UUID isn't true, use the filesystem UUIDs as
the `root' parameter to Linux.
* commands/search.c (options): Rename --fs_uuid to --fs-uuid.
* util/update-grub_lib.in (prepare_grub_to_access_device): Replace
--fs_uuid with --fs-uuid.
* util/update-grub.in: Allow filesystem UUID probes to fail (since not
all filesystems support them).
* util/grub.d/00_header.in: Remove obsolete comment referencing
convert_system_path_to_grub_path().
* util/update-grub.in: Likewise.
* util/update-grub_lib.in (is_path_readable_by_grub): New function.
(convert_system_path_to_grub_path): Add a warning message explaining
that this function is deprecated. Rely on is_path_readable_by_grub()
for the readability checks.
(font_path): Use is_path_readable_by_grub() for the readability
check rather than convert_system_path_to_grub_path().
* util/update-grub_lib.in (prepare_grub_to_access_device): New function.
* util/update-grub.in: Set `GRUB_FONT_PATH' to the system path, without
converting it first.
* util/grub.d/00_header.in: Use prepare_grub_to_access_device() to setup
grub.cfg for access to font file, and afterwards call it again to set
the root device.
* commands/search.c (options): Add --fs_uuid option.
(search_fs_uuid): New function.
(grub_cmd_search): Fix --set argument passing.
Use search_fs_uuid() when requested via --fs_uuid.
(grub_search_init): Update help message.
* fs/ext2.c (struct grub_ext2_sblock): Rename `unique_id' to `uuid'
and redeclare it as an array of 16-bit words.
(grub_ext2_uuid): New function.
(grub_ext2_fs): Reference grub_ext2_uuid() in `uuid' struct member.
* include/grub/fs.h (struct grub_fs): Add `uuid' struct member.
* util/update-grub.in (GRUB_DEVICE_UUID, GRUB_DEVICE_BOOT)
(GRUB_DEVICE_BOOT_UUID): New variables.
(GRUB_DRIVE. GRUB_DRIVE_BOOT. GRUB_DRIVE_BOOT_GRUB): Remove.
* util/grub.d/00_header.in: Set root using `search --fs_uuid' command
whenever possible.
* util/grub.d/10_hurd.in: Avoid explicit use of root drive. Instead,
just assume `root' variable has the right value.
* util/grub.d/10_linux.in: Likewise.
* util/grub-probe.c (probe): Probe for filesystem UUID when requested
via PRINT_FS_UUID.
(main): Recognise `-t fs_uuid' argument.
* util/biosdisk.c (map): Redefine structure to hold information
about GRUB drive name.
(get_drive): Reimplement without assuming (and verifiing) BIOS-like
drive names.
(call_hook): Remove.
(grub_util_biosdisk_iterate): Access drive names via `.drive' struct
member. Assume drive has partitions.
(grub_util_biosdisk_open): Access device names via `.device' struct
member.
(open_device): Likewise.
(find_drive): Likewise.
(read_device_map): Adjust map[] usage to match the new struct
definition. Don't check for duplicates (still possible, but not cheap
anymore).
(grub_util_biosdisk_fini): Free malloced buffers referenced by map[].
(make_device_name): Remove assumption of BIOS-like drive names.
* include/grub/script.h: Don't include grub_script.tab.h. It's
a generated file, which may only be included from the files with
DEPENDENCIES rules in the makefile. Don't use typedef YYSTYPE,
use union YYSTYPE, as the later allows forward declaration.
* normal/lexer.c: Don't use typedef YYSTYPE, use union YYSTYPE.
* fs/fshelp.c (grub_fshelp_map_block): New function.
(grub_fshelp_find_file): Use 64-bit type for pos and block address.
Use `>>' and `&' operator to avoid 64-bit divide and modulo.
* include/grub/fshelp.h (grub_fshelp_journal_type): New enum.
(GRUB_FSHELP_JOURNAL_UNUSED_MAPPING): New macro.
(grub_fshelp_journal): New structure.
(grub_fshelp_map_block): New function prototype.
(grub_fshelp_read_file): Use grub_disk_addr_t as block type.
(grub_fshelp_map_block): Likewise.
* fs/ext2.c (EXT3_FEATURE_COMPAT_HAS_JOURNAL): New macro.
(EXT3_JOURNAL_MAGIC_NUMBER): Likewise.
(EXT3_JOURNAL_DESCRIPTOR_BLOCK): Likewise.
(EXT3_JOURNAL_COMMIT_BLOCK): Likewise.
(EXT3_JOURNAL_SUPERBLOCK_V1): Likewise.
(EXT3_JOURNAL_SUPERBLOCK_V2): Likewise.
(EXT3_JOURNAL_REVOKE_BLOCK): Likewise.
(EXT3_JOURNAL_FLAG_ESCAPE): Likewise.
(EXT3_JOURNAL_FLAG_SAME_UUID): Likewise.
(EXT3_JOURNAL_FLAG_DELETED): Likewise.
(EXT3_JOURNAL_FLAG_LAST_TAG): Likewise.
(grub_ext2_sblock): New members for journal support.
(grub_ext3_journal_header): New structure.
(grub_ext3_journal_revoke_header): Likewise.
(grub_ext3_journal_block_tag): Likewise.
(grub_ext3_journal_sblock): Likewise.
(grub_fshelp_node): New members logfile and journal.
(grub_ext2_read_block): Change block type to grub_disk_addr_t. Use
grub_fshelp_map_block to get real block number.
(grub_ext2_blockgroup): Use grub_fshelp_map_block to get real block
number.
(grub_ext2_read_inode): Likewise.
(grub_ext3_get_journal): New function.
(grub_read_inode): Initialize journal using grub_ext3_get_journal.
(grub_ext2_close): Release memory used by journal.
* fs/reiserfs.c (REISERFS_MAGIC_STRING): Changed to "ReIsEr".
(REISERFS_MAGIC_DESC_BLOCK): New macro.
(grub_reiserfs_transaction_header): Renamed to
grub_reiserfs_description_block, replace field data with real_blocks.
(grub_reiserfs_commit_block): New structure.
(grub_reiserfs_data): New member journal.
(grub_reiserfs_get_item): Use grub_fshelp_map_block to get real block
number.
(grub_reiserfs_read_symlink): Likewise.
(grub_reiserfs_iterate_dir): Likewise.
(grub_reiserfs_open): Likewise.
(grub_reiserfs_read): Likewise.
(grub_reiserfs_get_journal): New function.
(grub_reiserfs_mount): Use "ReIsEr" as super block magic, as there are
three varieties ReIsErFs, ReIsEr2Fs and ReIsEr3Fs. Initialize journal
using grub_reiserfs_get_journal.
(grub_reiserfs_close): Release memory used by journal.
* fs/affs.c (grub_affs_read_block): Change block type to
grub_disk_addr_t. Use grub_divmod64 to do 64-bit division.
* fs/afs.c (grub_afs_read_block): Change block type to grub_disk_addr_t.
* fs/hfsplus.c (grub_hfsplus_read_block): Likewise.
* fs/ntfs.c (grub_ntfs_read_block): Likewise.
* fs/udf.c (grub_udf_read_block): Change block type to
grub_disk_addr_t. Use type cast to avoid warning.
* fs/xfs.c (grub_xfs_read_block): Likewise.
* commands/cat.c (grub_cmd_cat): Remove non-ESC keys from keyboard queue
to ensure that break with ESC will always work.
* commands/sleep.c (grub_interruptible_millisleep): Likewise.
Remove ESC from keyboard queue.
* util/biosdisk.c: [__CYGWIN__] Add includes.
(grub_util_biosdisk_open): Use Linux code also for Cygwin.
(get_os_disk): Move variable declarations to OS specific
parts to avoid warning.
[__GNU__] (get_os_disk): Fix /dev/sdXsN case.
[__CYGWIN__] (get_os_disk): Add Cygwin /dev/sdXN device names.
(grub_util_biosdisk_get_grub_dev): Use Linux code also for
Cygwin.
* util/getroot.c: [__CYGWIN__] Add includes.
(strip_extra_slashes): Fix "/" case.
[__CYGWIN__] (get_win32_path): New function.
[__CYGWIN__] (grub_get_prefix): Add conversion to win32 path.
[__CYGWIN__] (find_root_device): Disable.
[__CYGWIN__] (get_bootsec_serial): New function.
[__CYGWIN__] (find_cygwin_root_device): Likewise.
[__linux__] (grub_guess_root_device): Add early returns to simplify
structure.
[__CYGWIN__] (grub_guess_root_device): Call find_cygwin_root_device.
[__linux__] (grub_util_get_dev_abstraction): Enable LVM and RAID
check for Linux only.
* util/biosdisk.c (get_os_disk): Recognise xvd type disks.
* util/grub-mkdevicemap.c (get_xvd_disk_name): New function.
(make_device_map): Output entries for xvd type disks.
* util/update-grub_lib.in (make_system_path_relative_to_its_root):
Do not print a trailing slash (therefore, the root directory is an
empty string).
(convert_system_path_to_grub_path): Do not remove trailing slash
from make_system_path_relative_to_its_root() output.
* util/i386/pc/grub-install.in: Add trailing slash to output from
make_system_path_relative_to_its_root().
* util/grub-fstest.c (grub_refresh): Call `fflush (stdout)'. This
ensures that output lines aren't intermangled with those sent to
stderr (via grub_util_info()).
* util/grub-probe.c (grub_refresh): Likewise.
* util/i386/pc/grub-setup.c (grub_refresh): Likewise.
Based on patch from Fabian Greffrath <greffrath@leat.rub.de>
* util/grub.d/10_linux.in: Add ${GRUB_CMDLINE_LINUX_DEFAULT} to the
first boot option.
* util/update-grub.in: Export GRUB_CMDLINE_LINUX_DEFAULT.
* Makefile.in (RMKFILES): Add missing arch i386-ieee1275 and
i386-linuxbios.
* commands/hexdump.c (grub_cmd_hexdump): Support dumping of device,
change the buffer size to 4096 for cdrom device.
* conf/i386-ieee1275.rmk (pkglib_MODULES): Add _linux.mod, linux.mod
and nand.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
(nand_mod_SOURCES): Likewise.
(nand_mod_CFLAGS): Likewise.
(nand_mod_LDFLAGS): Likewise.
* disk/ieee1275/ofdisk.c (grub_ofdisk_open): Return
GRUB_ERR_UNKNOWN_DEVICE instead of GRUB_ERR_BAD_DEVICE if no device
type property. (nand device in olpc don't have this property)
* include/grub/disk.h (grub_disk_dev_id): New macro
GRUB_DISK_DEVICE_NAND_ID.
* include/grub/i386/ieee1275/loader.h (grub_rescue_cmd_linux): New
function prototype.
(grub_rescue_cmd_initrd): Likewise.
* include/grub/i386/linux.h (GRUB_LINUX_OFW_SIGNATURE): New macro.
(linux_kernel_params): Add new member ofw_signature, ofw_num_items,
ofw_cif_handler and ofw_idt, adjust padding number.
* include/grub/i386/pc/memory.h (grub_upper_mem): Export it if
GRUB_MACHINE_IEEE1275 is defined.
* include/grub/ieee1275/ieee1275.h (grub_available_iterate):
Use NESTED_FUNC_ATTR attribute on the hook parameter.
* kern/powerpc/ieee1275/init.c (grub_claim_heap): Use NESTED_FUNC_ATTR
on nested function heap_init.
(grub_upper_mem): New variable for i386-ieee1275.
(grub_get_extended_memory): New function for i386-ieee1275.
(grub_machine_init): Call grub_get_extended_memory for i386-ieee1275.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Use
NESTED_FUNC_ATTR on the hook parameter. Don't quit if no device type
property.
* loader/i386/ieee1275/linux.c: New file.
* loader/i386/ieee1275/linux_normal.c: New file.
* disk/ieee1275/nand.c: New file.
Restructures early code path on ieee1275 to unify grub_main() as
the first C function that is executed in every platform.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_init): New prototype.
* kern/i386/ieee1275/startup.S (_start): Jump to grub_main() instead of
cmain().
* kern/powerpc/ieee1275/crt0.S (_start): Likewise.
* kern/ieee1275/cmain.c (cmain): Rename to ...
* kern/ieee1275/cmain.c (grub_ieee1275_init): ... this.
* kern/ieee1275/init.c (grub_machine_init): Call grub_ieee1275_init()
at the beginning.
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): take only .text
section into account, newer toolchains generate unique build ids
* configure.ac: remove the test for --build-id=none acceptance,
we want build ids to bre preserved
* genmk.rb: add -R .note.gnu.build-id to objcopy, so build id
far from other sections don't cause the raw binary images grow
size
* util/i386/pc/grub-mkrescue.in: Add --emulation=floppy
to create a floppy emulation boot CD when non emulation mode
does not work.
Enable Joliet CD filesystem extension.
Improve robustness when handling LVM.
* disk/lvm.c (grub_lvm_getvalue): Return 0 when `*p' is NULL
(and leave `*p' unmodified).
(grub_lvm_iterate): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_memberlist): Don't assume `lv->vg->pvs != NULL' when
iterating through it.
(grub_lvm_open): Don't assume `vg->lvs != NULL' when iterating
through it.
(grub_lvm_scan_device): Check the return value (and fail gracefuly
when due) on each grub_lvm_getvalue() or grub_strstr() call.
Don't assume `vg->pvs != NULL' when iterating through it.
* util/grub.d/30_os-prober.in: New script. Use `os-prober' and
`linux-boot-prober' (if installed) to detect other operating
systems which are installed on the computer and add them to
the boot menu.
* conf/common.rmk: Build and install 30_os-prober.
* kern/powerpc/ieee1275/init.c: Move from here ...
* kern/ieee1275/init.c: ... to here. Update all users.
* kern/powerpc/ieee1275/cmain.c: Move from here ...
* kern/ieee1275/cmain.c: ... to here. Update all users.
* kern/powerpc/ieee1275/openfw.c: Move from here ...
* kern/ieee1275/openfw.c: ... to here. Update all users.
* loader/powerpc/ieee1275/multiboot2.c: Move from here ...
* loader/ieee1275/multiboot2.c: ... to here. Update all users.
Revert grub/machine/init.h addition by Pavel (since it breaks on
i386-ieee1275 and others):
* util/i386/pc/misc.c: Remove grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/biosdisk.c: Include grub/util/biosdisk.h.
* util/grub-fstest.c (execute_command): Make static.
* util/grub-mkdevicemap.c (check_device): Likewise.
* util/i386/pc/misc.c: Include grub/machine/init.h.
* util/powerpc/ieee1275/misc.c: Likewise.
* util/lvm.c: Include grub/util/lvm.h.
* util/misc.c: Include grub/kernel.h, grub/misc.h and
grub/cache.h.
* util/raid.c: Include grub/util/raid.h.
(grub_util_getdiskname): Make static.
* util/grub-emu.c (main): Remove calls to grub_hostfs_init() and
grub_hostfs_fini(), as they are called from grub_init_all() and
grub_fini_all() respectively. This fixes an infinite loop in
grub-fstest due to double registration of hostfs.
Reported by Christian Franke <Christian.Franke@t-online.de>
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options):
Fix signedness warnings.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate):
Likewise.
* util/ieee1275/get_disk_name.c: Include config.h so that
_GNU_SOURCE is defined and getline() is declared. Mark an
unused argument as such. Fix a signedness warning.
* genkernsyms.sh.in: Use more robust assignments for CC and
srcdir. Quote srcdir.
* gensymlist.sh.in: Likewise. Assert at the compile time that
the symbol table is not empty.
* disk/ata.c (grub_ata_open): Don't lose precision in disk->id.
* disk/host.c (grub_host_open): Likewise.
* disk/loopback.c (grub_loopback_open): Likewise.
* disk/memdisk.c (grub_memdisk_open): Use a string pointer for
disk->id as in disk/host.c, not a multi-character constant.
* util/grub-fstest.c (cmd_cmp): Use fseeko(), not fseek(). The
later is obsolete, potentially dangerous and sets a bad example.
* util/i386/efi/grub-mkimage.c (make_header): Likewise.
* util/misc.c (grub_util_get_image_size): Likewise.
* video/reader/png.c (grub_png_data): New member is_16bit and
image_data.
(grub_png_decode_image_header): Detect 16 bit png image.
(grub_png_convert_image): New function to convert 16 bit image to 8 bit.
(grub_png_decode_png): Call grub_png_convert_image for 16 bit image.
(grub_video_reader_png): Release memory occupied by image_data.
* fs/ntfs.c (find_attr): Handle non-resident attribute list larger than
4096 bytes.
(grub_nfs_mount): Skip the test for sector per cluster.
* include/grub/ntfs.h (MAX_SPC): Removed.
* fs/udf.c (grub_udf_mount): Fix warning about a shadowing a
variable.
* include/grub/i386/loader.h: Change declaration of
grub_linux_boot() to match what grub_loader_set() expects.
* util/getroot.c (grub_guess_root_device): Return const char* to
fix a warning.
* util/grub-probe.c (probe): Fix a warning about uninitialized
abstraction_name variable.
* util/i386/get_disk_name.c (grub_util_get_disk_name): Mark
second argument as unused to fix a warning.
* kern/i386/pc/startup.S (real_to_prot): Use %cs prefix to load
GDT. This is more robust, as %ds can change.
(grub_biosdisk_rw_int13_extensions): Don't clear %ds before
calling real_to_prot().
(grub_biosdisk_get_diskinfo_int13_extensions): Likewise.
* kern/i386/pc/startup.S: Assert that uncompressed functions
don't spill beyond GRUB_KERNEL_MACHINE_RAW_SIZE.
* kern/i386/pc/lzo1x.S: Remove all .align directives in the
code, as they push parts of the code (error handlers) beyond
GRUB_KERNEL_MACHINE_RAW_SIZE. Speed is not as important in this
code as correctness and size.
* kern/i386/pc/startup.S
(grub_biosdisk_get_diskinfo_int13_extensions): When converting
data block address to the real mode, keep offset minimal. This
works around a bug in AWARD BIOS on old Athlon systems, which
makes CD detection hang.
Remove 2 TiB limit in ata.mod.
* disk/ata.c (grub_ata_device): Promote `size' to grub_uint64_t.
(grub_ata_dumpinfo): Print sector count with 0x%llx.
(grub_ata_identify): Interpret `&info16[100]' as a pointer to
grub_uint64_t instead of grub_uint32_t.
* loader/i386/pc/multiboot.c (grub_multiboot_get_bootdev): New function.
(grub_multiboot): Set boot device.
* boot/i386/pc/lnxboot.S (real_code_2): Set %dh to 0xFF.
* util/update-grub.in: Reorganise terminal validity check. Accept
`ieee1275:console' (OLPC) and `*:gfxterm' as valid too.
Based on suggestion by Franklin PIAT.
* include/grub/util/getroot.h (grub_util_check_block_device): Export new
function.
* util/getroot.c (grub_util_check_block_device): New function that
returns the given argument if it is a block device and returns NULL else.
* util/grub-probe.c (argument_is_device): New variable.
(probe): Promote device_name from a variable to an argument. Receive
device_name from grub_util_check_block_device() if path is NULL and from
grub_guess_root_device() else. Do not free() device_name anymore.
(options): Introduce new parameter '-d, --device'.
(main): Add description of the new parameter to the help screen.
Rename path variable to argument. Set argument_is_device if the '-d'
option is given. Pass argument to probe() depending on
argument_is_device.
* partmap/gpt.c (grub_gpt_magic): Add `0x' qualifier to each member,
since they were intended to be in hex. This didn't break previously
because of a bug in gpt_partition_map_iterate() (see below).
(gpt_partition_map_iterate): Replace `grub_memcmp' with `! grub_memcmp'
when checking the validity of GPT header.
Remove `partno', since it always provides the same information as `i'.
* conf/i386-pc.rmk (pkglib_MODULES): Add aout.mod _bsd.mod and bsd.mod.
(aout_mod_SOURCES): New variable.
(aout_mod_CFLAGS): Likewise.
(aout_mod_LDFLAGS): Likewise.
(_bsd_mod_SOURCES): New variable.
(_bsd_mod_CFLAGS): Likewise.
(_bsd_mod_LDFLAGS): Likewise.
(bsd_mod_SOURCES): New variable.
(bsd_mod_CFLAGS): Likewise.
(bsd_mod_LDFLAGS): Likewise.
* include/grub/aout.h: New file.
* include/grub/i386/loader.h (grub_unix_real_boot): New function.
* include/grub/i386/bsd.h: New file.
* include/grub/i386/pc/init.h (grub_get_mmap_entry): Use EXPORT_FUNC
to make it public.
* kern/elf.c (grub_elf32_load): Get the physical address after the hook
function is called, so that it's possible to change it inside the hook.
(grub_elf64_load): Likewise.
(grub_elf_file): Don't close the file if elf header is not found.
(grub_elf_close): Close the file if grub_elf_file fails (The new
grub_elf_file won't close it).
(grub_elf32_size): Use NESTED_FUNC_ATTR for nested function calcsize.
(grub_elf64_size): Likewise.
* kern/i386/loader.S (grub_unix_real_boot): New function.
* loader/aout.c: New file.
* loader/i386/bsd.c: New file.
* loader/i386/bsd_normal.c: New file.
* loader/i386/pc/multiboot.c (grub_multiboot): Handle a.out format.
* loader/multiboot2.c (grub_multiboot2): Reset grub_errno so that it
can test othe formats.
* partmap/gpt.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_empty): Redefine with macro from
`<grub/gpt_partition.h>'.
(gpt_partition_map_iterate): Adjust partition type comparison.
Export `entry' as partmap-specific `part.data' struct.
(grub_gpt_header, grub_gpt_partentry): Move from here ...
* include/grub/gpt_partition.h (grub_gpt_header)
(grub_gpt_partentry): ... to here (new file).
* util/i386/pc/grub-setup.c: Include `<grub/gpt_partition.h>'.
(grub_gpt_partition_type_bios_boot): New const variable, defined
with macro from `<grub/gpt_partition.h>'.
(setup): Replace `first_start' with `embed_region', which keeps
track of the embed region (and is partmap-agnostic).
Replace find_first_partition_start() with find_usable_region(),
which finds a usable region for embedding using partmap-specific
knowledge (supports PC/MSDOS and GPT).
Fix all assumptions that the embed region start at sector 1, using
`embed_region.start' from now on. Similarly, use `embed_region.end'
rather than `first_start' to calculate available size.
In grub_util_info() message, replace "into after the MBR" with an
indication of the specific sector our embed region starts at.
* util/i386/pc/grub-setup.c (setup): In find_first_partition_start(),
do not assume partition map is PC/MSDOS before performing checks that
are specific to that layout.
* conf/i386-efi.rmk (grub_emu_SOURCES): Replace commands/i386/pc/halt.c and
reboot.c by commands/halt.c and reboot.c.
(grub_install_SOURCES): Add halt.mod and reboot.mod.
(halt_mod_SOURCES): New variable.
(halt_mod_CFLAGS): Likewise.
(halt_mod_LDFLAGS): Likewise.
(reboot_mod_SOURCES): Likewise.
(reboot_mod_CFLAGS): Likewise.
(reboot_mod_LDFLAGS): Likewise.
* conf/i386-ieee1275.rmk (grub_emu_SOURCES): Replace commands/ieee1275/halt.c
and reboot.c by commands/halt.c and reboot.c.
(halt_mod_SOURCES): Likewise.
(reboot_mod_SOURCES): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Replace commands/i386/pc/reboot.c by
commands/reboot.c.
(reboot_mod_SOURCES): Likewise.
* commands/i386/pc/reboot.c: merge this file ...
* commands/ieee1275/reboot.c: ... and this file ...
* commands/reboot.c: ... to this file.
Add some precompiler directive to include the correct header for each
machine.
* commands/ieee1275/halt.c: move this file ...
* commands/halt.c: ... to here.
Add some precompiler directive to include the correct header for each
machine.
* include/grub/efi/efi.h (grub_reboot): New function declaration.
(grub_halt): Likewise.
* kern/efi/efi.c (grub_reboot): New function.
(grub_halt): Likewise.
* util/getroot.c (grub_guess_root_device): Inspect /dev/evms before
/dev (like it is done for /dev/mapper). This doesn't provide support
for EVMS, but at least it is now easy to identify the problem when it
arises.
* util/biosdisk.c (grub_util_biosdisk_open, linux_find_partition)
(grub_util_biosdisk_get_grub_dev): Check open() exit status by
comparing it with -1, not 0.
* kern/main.c (grub_load_normal_mode): Do not reset `grub_errno'. Call
grub_print_error() instead. This will let user know why we're entering
rescue mode.
Based on suggestions from Sam Morris.
* font/manager.c (unknown_glyph): Added variable for unknown glyph.
(fill_with_default_glyph): Changed to use unknown_glyph for fill
pattern for unknown glyphs.
* configure.ac: Probe for `help2man'.
* Makefile.in (builddir): New variable.
(HELP2MAN): Likewise. Set to `true' when @HELP2MAN@ doesn't provide it,
or otherwise add a few flags/options to it.
(install-local): For every executable utility or script that is
installed, invoke $(HELP2MAN) to install a manpage based on --help
output.
* util/i386/pc/grub-install.in: Move down `update-grub_lib' sourcing, so
that it doesn't prevent --help from working in build tree.
* util/i386/pc/grub-mkrescue.in (usage): Replace `grub-devel@gnu.org'
with `bug-grub@gnu.org'.
* util/powerpc/ieee1275/grub-mkrescue.in (usage): Likewise.
* util/update-grub.in (usage): New function.
Implement proper argument check, with support for --help and --version
(as well as existing -y).
* disk/raid.c (grub_raid_scan_device): Add a pair of sanity checks for
situations in which we can deduce the RAID size and the superblock
doesn't match it.
* disk/lvm.c [GRUB_UTIL] (grub_lvm_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of LVM physical volumes.
[GRUB_UTIL] (grub_lvm_dev): Add `memberlist' member.
* disk/raid.c [GRUB_UTIL] (grub_raid_memberlist): New function. Construct
and return a grub_diskmemberlist_t composed of physical array members.
[GRUB_UTIL] (grub_raid_dev): Add `memberlist' member.
* include/grub/disk.h [GRUB_UTIL] (grub_disk_memberlist): New struct
prototype.
[GRUB_UTIL] (struct grub_disk_dev): Add `memberlist' function pointer.
[GRUB_UTIL] (struct grub_disk_memberlist): New struct declaration.
[GRUB_UTIL] (grub_disk_memberlist_t): New typedef.
* util/grub-probe.c (probe): Move partmap probing code from here ...
(probe_partmap): ... to here.
(probe): Use probe_partmap() once for the disk we're probing, and
additionally, when such disk contains a memberlist() struct member,
once for each disk that is contained in the structure returned by
memberlist().
* util/grub-probe.c (main): When `verbosity > 1', set `debug'
environment variable to 'all' in order to obtain debug output from
non-util/ code.
* util/i386/pc/grub-setup.c (main): Likewise.
* disk/raid.c (grub_raid_scan_device): Check for
`array->device[sb.this_disk.number]' rather than for
`array->device[sb.this_disk.number]->name', since the latter is not
garanteed to be accessible.
* include/grub/raid.h (struct grub_raid_array): Change type of `device'
to a grub_disk_t array.
* disk/raid.c (grub_raid_read): Replace `device[x].disk' accesses with
`device[x]'.
(grub_raid_scan_device): Replace `device[x].name' accesses with
`device[x]->name'. Simplify initialization of `array->device[x]'.
* disk/raid.c (grub_raid_open, grub_raid_scan_device): Add a few
grub_dprintf() calls.
* kern/disk.c (grub_disk_read): Include grub_errmsg in out of range
error message.
Patch from Jeroen Dekkers.
* disk/raid.c (grub_raid_scan_device): Reset `grub_errno' on disk
failure, since succesfuly reading all array members might not be
required.
* fs/cpio.c (grub_cpio_find_file): Return GRUB_ERR_NONE
(and set *ofs = 0) instead of GRUB_ERR_FILE_NOT_FOUND on
last block of a cpio or tar stream.
Check for "TRAILER!!!" instead of any empty data
block to detect last block of a cpio stream.
(grub_cpio_dir): Fix constness of variable np.
(grub_cpio_open): Return GRUB_ERR_FILE_NOT_FOUND if
cpio or tar trailer is detected. This fixes a crash
on open of a non existing file.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Get physical
address of entry.
(grub_multiboot_load_elf64): Likewise.
(grub_multiboot): Initialize mbi structure.
* util/grub-fstest.c: Don't include unused header file script.h.
* conf/common.rmk (grub-fstest.c_DEPENDENCIES): Move to the begginning
of file.
(grub_fstest_SOURCES): Likewise.
* include/grub/term.h (GRUB_TERM_LEFT, GRUB_TERM_RIGHT)
(GRUB_TERM_UP, GRUB_TERM_DOWN, GRUB_TERM_HOME, GRUB_TERM_END)
(GRUB_TERM_DC, GRUB_TERM_PPAGE, GRUB_TERM_NPAGE, GRUB_TERM_ESC)
(GRUB_TERM_TAB, GRUB_TERM_BACKSPACE): New macros.
* kern/i386/pc/startup.S: Include `<grub/term.h>'.
(translation_table): Replace hardcoded values with macros
provided by `<grub/term.h>'.
* term/i386/pc/at_keyboard.c: Include `<grub/term.h>'.
(keyboard_map): Correct/add a few values, with macros provided
by `<grub/term.h>'.
(keyboard_map_shift): Zero values that don't differ from their
`keyboard_map' equivalents.
(grub_console_checkkey): Optimize KEYBOARD_STATUS_CAPS_LOCK toggling.
Discard the second scan code that is always sent by Caps lock.
Only use `keyboard_map_shift' when it provides a non-zero value,
otherwise fallback to `keyboard_map'.
Make grub-setup handle a separate root device.
* util/i386/pc/grub-setup.c (setup): Always open the root device,
so that the root device can be compared with the destination
device.
When embedding the core image, if the root and destination devices
are different, set ROOT_DRIVE to ROOT_DEV->DISK->ID. Otherwise, to
0xFF.
When not embedding, set ROOT_DRIVE to 0xFF.
Add support for having a grub directory in a different drive. This
is still only the data handling part.
* kern/i386/pc/startup.S (multiboot_trampoline): Set %dh to 0xFF.
(codestart): Save %dh in GRUB_ROOT_DRIVE.
(grub_root_drive): New variable.
* kern/i386/pc/init.c (make_install_device): Use GRUB_ROOT_DRIVE
instead of GRUB_BOOT_DRIVE to construct a device name. Set
GRUB_ROOT_DRIVE to GRUB_BOOT_DRIVE if it is 0xFF, otherwise use it
as it was.
* include/grub/i386/pc/kernel.h (grub_root_drive): New prototype.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_ROOT_DRIVE): New
macro.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Set to 0x4f.
* boot/i386/pc/pxeboot.S (_start): Set %dh to 0xFF. For now, this
is bogus, because PXE booting does not specify any drive
correctly.
* boot/i386/pc/lnxboot.S (reg_edx): Set the second byte to 0xFF. I
am not sure if this is really correct.
* boot/i386/pc/cdboot.S: Set %dh to 0xFF, because the root drive
is always identical to the boot drive when booting from a CD.
* boot/i386/pc/boot.S (MOV_MEM_TO_AL): Removed. Not needed any
longer.
(root_drive): New variable.
(real_start): Unconditionally set %dh to ROOT_DRIVE.
(setup_sectors): Push %dx right after popping it, because %dh will
be modified later.
(copy_buffer): Restore %dx.
* a/kern/i386/pc/startup.S (grub_chainloader_real_boot): Pop
%edx and %esi from stack only after grub_gate_a20() is called.
grub_gate_a20() clobbers %edx.
* conf/i386-pc.rmk (pkglib_IMAGES): Add cdboot.img.
(cdboot_img_SOURCES): New variable.
(cdboot_img_ASFLAGS): New variable.
(cdboot_img_LDFLAGS): New variable.
* boot/i386/pc/cdboot.S: New file.
* disk/i386/pc/biosdisk.c (cd_start): New variable.
(cd_count): Likewise.
(grub_biosdisk_get_drive): Add support for cd device.
(grub_biosdisk_call_hook): Likewise.
(grub_biosdisk_iterate): Likewise.
(grub_biosdisk_open): Likewise.
(GRUB_BIOSDISK_CDROM_RETRY_COUNT): New macro.
(grub_biosdisk_rw): Support reading from cd device.
(GRUB_MOD_INIT): Iterate cd devices.
* include/grub/i386/pc/biosdisk.h (GRUB_BIOSDISK_FLAG_CDROM): New macro.
(GRUB_BIOSDISK_MACHINE_CDROM_START): Likewise.
(GRUB_BIOSDISK_MACHINE_CDROM_END): Likewise.
* kern/i386/pc/init.c (make_install_device): Check for cd device.
* fs/ufs.c (INODE_BLKSZ): Fix incorrect value.
(grub_ufs_get_file_block): Fix indirect block calculation problem.
* fs/xfs.c (grub_xfs_sblock): New member log2_dirblk.
(grub_xfs_btree_node): New structure.
(grub_xfs_btree_root): New structure.
(grub_xfs_inode): New members nblocks, extsize, nextents and btree.
(GRUB_XFS_EXTENT_OFFSET): Use exts instead of inode->data.extents.
(GRUB_XFS_EXTENT_BLOCK): Likewise.
(GRUB_XFS_EXTENT_SIZE): Likewise.
(grub_xfs_read_block): Support btree format type.
(grub_xfs_iterate_dir): Use NESTED_FUNC_ATTR in call_hook.
Use directory block as basic unit.
* fs/fshelp.c (grub_fshelp_read_file): Bug fix for sparse block.
* aclocal.m4 (grub_i386_CHECK_REGPARM_BUG): Define NESTED_FUNC_ATTR as
__attribute__ ((__regparm__ (1))).
Correct a mistake in previous commit.
* conf/i386-pc.rmk (normal/execute.c_DEPENDENCIES): Move to the
top.
(normal/command.c_DEPENDENCIES): New variable.
* util/powerpc/ieee1275/grub-mkrescue.in: New file.
* conf/powerpc-ieee1275.rmk: Add grub-mkrescue support for
PowerPC.
* DISTLIST: Add util/powerpc/ieee1275/grub-mkrescue.in.
to create a gap between _end and the modules added to the image
with grub-mkrescue. That fixes "CLAIM failed" on PowerMAC.
* kern/powerpc/ieee1275/init.c: Use GRUB_MOD_GAP.
* util/elf/grub-mkimage.c (add_segments): Likewise.
* fs/reiserfs.c (grub_fshelp_node): New member next_offset.
(grub_reiserfs_get_item): Save offset of the next item.
(grub_reiserfs_iterate_dir): Use next_offset to find next item.
that hang if GRUB tries to setup colors.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Don't set
colors for firmwares that don't support it.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag):
Recognize Open Hack'Ware, set flags to work around its
limitations.
* fs/ufs.c (GRUB_UFS_VOLNAME_LEN): New macro.
(grub_ufs_sblock): New member volume name.
(grub_ufs_find_file): Fix string copy bug.
(grub_ufs_label): Implement this function properly.
* fs/hfs.c (grub_hfs_cnid_type): New enum.
(grub_hfs_iterate_records): Use the correct file number for extents
and catalog file. Fix problem in next index calculation.
(grub_hfs_find_node): Replace recursive function call with loop.
(grub_hfs_iterate_dir): Replace recursive function call with loop.
* term/i386/pc/at_keyboard.c (grub_keyboard_isr): #ifdef out
grub_dprintf calls, since they make "debug=all" mode unusable.
(grub_console_checkkey): Likewise.
* kern/i386/pc/init.c (make_install_device): When memdisk image is
present, "(memdisk)/boot/grub" becomes the default prefix.
* util/i386/pc/grub-mkrescue.in: Switch to a minimal core.img plus
a memdisk tarball with all the modules. Add --overlay=DIR option that
allows users to overlay additional files into the image.
* conf/i386-ieee1275.rmk (kernel_elf_SOURCES): Add `machine/loader.h'
and `machine/memory.h'.
(pkglib_MODULES): Add `multiboot.mod' and `_multiboot.mod'.
(_multiboot_mod_SOURCES): New variable.
(_multiboot_mod_CFLAGS): Likewise.
(_multiboot_mod_LDFLAGS): Likewise.
(multiboot_mod_SOURCES): Likewise.
(multiboot_mod_CFLAGS): Likewise.
(multiboot_mod_LDFLAGS): Likewise.
* include/grub/i386/ieee1275/loader.h: New file.
* include/grub/i386/ieee1275/machine.h: Likewise.
* include/grub/i386/ieee1275/memory.h: Likewise.
* include/grub/i386/pc/init.h (grub_os_area_addr): Remove (redundant)
variable declaration.
(grub_os_area_size): Likewise.
* kern/i386/ieee1275/init.c (grub_os_area_addr, grub_os_area_size)
(grub_lower_mem, grub_upper_mem): New variables.
(grub_stop_floppy): New function (just to make
grub_multiboot2_real_boot() happy).
* kern/i386/ieee1275/startup.S: Include `<grub/machine/memory.h>',
`<grub/cpu/linux.h>', `<multiboot.h>' and `<multiboot2.h>'.
(grub_stop): New function.
Include `"../realmode.S"' and `"../loader.S"'.
* loader/multiboot_loader.c: Include `<grub/machine/machine.h>'.
Replace `__i386__' #ifdefs with `GRUB_MACHINE_PCBIOS'.
* loader/powerpc/ieee1275/multiboot2.c (grub_mb2_arch_boot): On i386,
rely on grub_multiboot2_real_boot() for final boot.
* disk/ieee1275/ofdisk.c (grub_ofdisk_iterate): When
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag is set, skip any
device that doesn't look like an SD card.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
`GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_set_flag): Detect
OLPC laptop, and set `GRUB_IEEE1275_FLAG_OFDISK_SDCARD_ONLY' when
found.
* conf/i386-pc.rmk (GRUB_MEMORY_MACHINE_LINK_ADDR): New variable.
(kernel_img_LDFLAGS): Use `GRUB_MEMORY_MACHINE_LINK_ADDR' as link
address.
(grub_mkimage_CFLAGS): Propagate `GRUB_MEMORY_MACHINE_LINK_ADDR' as
a C macro.
* include/grub/i386/pc/memory.h (GRUB_MEMORY_MACHINE_UPPER): New macro.
Indicates start of upper memory.
* util/i386/pc/grub-mkimage.c: Include `<grub/machine/memory.h>'.
(generate_image): Abort when image size is big enough to corrupt
upper memory.
* include/grub/i386/pc/vga.h: Include `<grub/machine/memory.h>'.
(GRUB_MEMORY_MACHINE_VGA_ADDR): Alias for `GRUB_MEMORY_MACHINE_UPPER'.
* term/i386/pc/vga.c (VGA_MEM): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
* video/i386/pc/vbe.c: Include `<grub/machine/vga.h>'.
(grub_vbe_set_video_mode): Use `GRUB_MEMORY_MACHINE_VGA_ADDR'
instead of hardcoding 0xA0000.
Fix detection of very small filesystems (like tar).
* fs/reiserfs.c (grub_reiserfs_mount): When disk is too small to
contain a ReiserFS, abort with GRUB_ERR_BAD_FS rather than
GRUB_ERR_OUT_OF_RANGE (which made the upper layer think there's
a problem with this disk).
* include/grub/i386/pc/kernel.h: Include `<grub/symbol.h>'.
* include/grub/kernel.h (grub_arch_memdisk_addr,
grub_arch_memdisk_size): Moved from here ...
* include/grub/i386/pc/kernel.h (grub_arch_memdisk_addr,
grub_arch_memdisk_size): ... to here.
Mostly based on bugfix from Bean.
* kern/elf.c (grub_elf32_phdr_iterate): Use `NESTED_FUNC_ATTR'
attribute with hook() parameter.
(grub_elf32_load): Use `NESTED_FUNC_ATTR' with grub_elf32_load_segment()
declaration.
(grub_elf64_phdr_iterate): Use `NESTED_FUNC_ATTR'
attribute with hook() parameter.
(grub_elf64_load): Use `NESTED_FUNC_ATTR' with grub_elf64_load_segment()
declaration.
* conf/i386-pc.rmk (kernel_img_HEADERS): Add `machine/kernel.h'.
(pkglib_MODULES): Add `memdisk.mod'.
(memdisk_mod_SOURCES): New variable.
(memdisk_mod_CFLAGS): Likewise.
(memdisk_mod_LDFLAGS): Likewise.
* disk/memdisk.c: New file.
* include/grub/disk.h (grub_disk_dev_id): Add
`GRUB_DISK_DEVICE_MEMDISK_ID'.
* include/grub/i386/pc/kernel.h
(GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE): New macro.
(GRUB_KERNEL_MACHINE_PREFIX): Increment by 4.
(grub_kernel_image_size): New variable declaration.
(grub_total_module_size): Likewise.
(grub_memdisk_image_size): Likewise.
* include/grub/i386/pc/memory.h
(GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR): New macro.
* include/grub/kernel.h: Include `<grub/symbol.h>'.
(grub_arch_memdisk_addr): New variable declaration.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/init.c (grub_arch_memdisk_addr): New function.
(grub_arch_memdisk_size): Likewise.
* kern/i386/pc/startup.S (grub_memdisk_image_size): New variable.
(codestart): Replace hardcoded `0x100000' with
`GRUB_MEMORY_MACHINE_DECOMPRESSION_ADDR' macro.
* util/i386/pc/grub-mkimage.c: Include `<grub/misc.h>'.
(generate_image): Add `memdisk_path' parameter. When `memdisk_path' is
not NULL, append the contents of the file it refers to, at the end of
the compressed kernel image. Initialize `grub_memdisk_image_size'
variable (at `GRUB_KERNEL_MACHINE_MEMDISK_IMAGE_SIZE' offset).
(options): Add "memdisk"|'m' option.
(main): Parse --memdisk|-m option, and pass user-provided path as
parameter to generate_image().
Fix detection of "real mode" when /options/real-mode? doesn't exist.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_mmu): New variable
declaration.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_mmu): New variable.
(grub_ieee1275_find_options): If `grub_ieee1275_mmu' is 0, set
`GRUB_IEEE1275_FLAG_REAL_MODE'.
(cmain): Intialize `grub_ieee1275_mmu' (using /chosen/mmu integer
property).
* kern/powerpc/ieee1275/openfw.c (grub_map): Rely on pre-initialized
`grub_ieee1275_mmu' rather than obtaining a handler on every call.
Get rid of confusing function (superceeded by
`grub_ieee1275_get_integer_property')
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_decode_int_4): Remove
prototype.
* kern/ieee1275/ieee1275.c (grub_ieee1275_decode_int_4): Remove
function.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid use of
grub_ieee1275_decode_int_4(), by obtaining integer properties directly
in native endianess from grub_ieee1275_get_integer_property().
* kern/powerpc/ieee1275/openfw.c (grub_halt): Issue "power-off"
command after "shut-down", since implementations differ on which
the command for halt is.
PowerPC changes provided by Pavel Roskin.
* kern/powerpc/ieee1275/cmain.c (cmain): Don't take any arguments.
* kern/powerpc/ieee1275/crt0.S: Store r5 in grub_ieee1275_entry_fn,
don't rely on cmain() doing it.
* kern/i386/ieee1275/startup.S (_start): Store %eax in
grub_ieee1275_entry_fn, don't rely on cmain() doing it.
* include/grub/i386/linuxbios/memory.h
(GRUB_MEMORY_MACHINE_LINUXBIOS_TABLE_ADDR): Remove macro.
* kern/i386/linuxbios/table.c (grub_linuxbios_table_iterate): Do not
receive `table_header' as argument. Instead, probe for it in the
known memory ranges where it can be present.
(grub_available_iterate): Do not pass a fixed `table_header' address
to grub_linuxbios_table_iterate().
* include/grub/ieee1275/ieee1275.h
(grub_ieee1275_get_integer_property): New function prototype.
* kern/ieee1275/ieee1275.c: Include `<grub/types.h>'.
(grub_ieee1275_get_integer_property): New function. Wraps around
grub_ieee1275_get_property() to handle endianess.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Replace
grub_ieee1275_get_property() with grub_ieee1275_get_integer_property()
where appropiate.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Likewise.
(grub_map): Likewise.
* kern/sparc64/ieee1275/openfw.c (grub_map): Likewise.
* normal/execute.c (grub_script_exec_argument_to_string): Check for undefined variable.
(grub_script_execute_cmdline): Reset grub_errno.
* normal/main.c (read_config_file): Reset grub_errno.
* normal/parse.y (script_init): New.
(script): Move function and menuentry here.
(delimiter): New.
(command): Add delimiter at the end of command.
(commands): Adjust to match the new command.
(commandblock): Remove grub_script_lexer_record_start.
(menuentry): Add grub_script_lexer_record_start, use the new commands.
(if): Use the new commands.
* conf/common.rmk (pkgdata_MODULES): Add echo.mod.
* normal/menu.c (run_menu): Move timeout message from here ...
(print_timeout): ... to here.
(run_menu): Use print_timeout() once during initial draw to print
the whole message, and again in every clock tick to update only
the number of seconds.
* kern/powerpc/ieee1275/openfw.c (grub_available_iterate): Obtain
actual size of `available' from grub_ieee1275_get_property(), and
restrict parsing to that bound.
* include/grub/util/getroot.h (grub_dev_abstraction_types): New enum.
(grub_util_get_dev_abstraction): New function prototype.
* util/getroot.c: Include `<grub/util/getroot.h>'
(grub_util_get_grub_dev): Move detection of abstraction type to ...
(grub_util_get_dev_abstraction): ... here (new function).
* util/grub-probe.c: Convert PRINT_* to an enum. Add
`PRINT_ABSTRACTION'.
(probe): Probe for abstraction type when requested.
(main): Understand `--target=abstraction'.
* util/i386/efi/grub-install.in: Add abstraction module to core
image when it is found to be necessary.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Likewise.
* util/update-grub_lib.in (font_path): Return system path without
converting to GRUB path.
* util/update-grub.in: Convert system path returned by font_path()
to a GRUB path. Use `grub-probe -t abstraction' to determine what
abstraction module is needed for loading fonts (if any). Export
that as `GRUB_PRELOAD_MODULES'.
* util/grub.d/00_header.in: Process `GRUB_PRELOAD_MODULES' (print
insmod commands).
* util/update-grub_lib.in (grub_file_is_not_garbage): New function.
Determines if a file is garbage left by packaging systems, etc.
* util/update-grub.in: Use grub_file_is_not_garbage() as a condition
for processing /etc/grub.d scripts.
* util/grub.d/10_hurd.in: Fix `GRUB_DISTRIBUTOR' comparison.
* util/grub.d/10_linux.in: Likewise. Use grub_file_is_not_garbage()
as a condition for processing Linux images.
* kern/device.c (grub_device_iterate): Do not abort device iteration
when one of the devices cannot be opened.
* kern/disk.c (grub_disk_open): Do not account previous failures of
unrelated functions when grub_errno is checked for.
* loader/i386/pc/linux.c (grub_rescue_cmd_linux): For
`! grub_linux_is_bzimage', change order of address comparison to make
it more intuitive, and improve "too big zImage" error message.
* boot/i386/pc/boot.S (boot_drive_check): Add a comment indicating
which instruction is modified by grub-setup during installation
(since it wasn't obvious by only looking at this file).
* fs/reiserfs.c (grub_reiserfs_get_key_v2_type): Handle endianness
correctly.
(grub_reiserfs_get_key_offset): Likewise.
(grub_reiserfs_set_key_offset): Likewise.
(grub_reiserfs_set_key_type): Likewise.
(grub_reiserfs_iterate_dir): Return 1 if found, otheriwise 0.
(GRUB_REISERFS_KEYV2_BITFIELD): Undefined. Probably it would be
better to remove the bitfield version completely.
* fs/reiserfs.c (grub_reiserfs_iterate_dir): ENTRY_ITEM must be
allocated from the heap, due to the fshelp implementation.
(grub_reiserfs_dir): Free NODE, due to the same reason.
* include/grub/normal.h (grub_env_write_color_normal): New prototype.
(grub_env_write_color_highlight): Likewise.
(grub_wait_after_message): Likewise.
* normal/color.c: New file.
* conf/i386-pc.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-efi.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/i386-linuxbios.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Add `normal/color.c'.
(normal_mod_DEPENDENCIES): Likewise.
* normal/menu_entry.c (run): Rely on grub_wait_after_message()
for waiting after a message is printed.
* normal/main.c (read_config_file): Likewise.
(grub_normal_init): Register grub_env_write_color_normal() and
grub_env_write_color_highlight() hooks. Mark `color_normal' and
`color_highlight' variables as global.
* normal/menu.c (grub_wait_after_message): New function.
(grub_color_menu_normal): New variable. Replaces ...
(GRUB_COLOR_MENU_NORMAL): ... this macro.
(grub_color_menu_highlight): New variable. Replaces ...
(GRUB_COLOR_MENU_HIGHLIGHT): ... this macro.
(draw_border): Set color state to `GRUB_TERM_COLOR_NORMAL' instead of
`GRUB_TERM_COLOR_STANDARD'.
(print_message): Use `grub_setcolorstate' to reload colors. Rename
`normal_code' and `highlight_code' to `old_color_normal' and
`old_color_highlight', respectively.
(grub_menu_init_page): Update colors when drawing the menu, based on
`menu_color_normal' and `menu_color_highlight' variables.
(grub_menu_run): Rely on grub_wait_after_message() for waiting after
a message is printed.
* kern/i386/linuxbios/init.c: Put "void" to all function
declarations with no arguments.
* kern/powerpc/ieee1275/init.c: Likewise.
* term/i386/pc/at_keyboard.c: Likewise.
* term/i386/pc/vga_text.c: Likewise.
* util/grub-mkdevicemap.c: Likewise.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf32): Improve error
message when loaded image is out of bounds.
(grub_multiboot_load_elf64): Likewise.
* include/grub/video.h: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_adapter): Added unmap_color and get_active_render_target.
* video/video.c: Added grub_video_unmap_color and
grub_video_get_active_render_target.
(grub_video_get_info): Changed method to accept NULL pointer as an
argument to allow detection of active video adapter.
* video/i386/pc/vbe.c: Renamed grub_video_vbe_unmap_color as
grub_video_vbe_unmap_color_int.
Added grub_video_vbe_unmap_color and
grub_video_vbe_get_active_render_target.
(grub_video_vbe_adapter): Added unmap_color and
get_active_render_target.
* video/i386/pc/vbeblit.c: Replaced grub_video_vbe_unmap_color usage
with grub_video_vbe_unmap_color_int.
* term/gfxterm.c (DEFAULT_STANDARD_COLOR): Added.
(DEFAULT_NORMAL_COLOR): Likewise.
(DEFAULT_HIGHLIGHT_COLOR) Likewise.
(DEFAULT_FG_COLOR): Removed.
(DEFAULT_BG_COLOR): Likewise.
(DEFAULT_CURSOR_COLOR): Changed value.
(grub_virtual_screen): Added standard_color_setting,
normal_color_setting, highlight_color_setting and term_color.
(grub_virtual_screen): Removed fg_color_setting and bg_color_setting.
(bitmap_width): Added.
(bitmap_height): Likewise.
(bitmap): Likewise.
(set_term_color): Likewise.
(grub_virtual_screen_setup): Changed to use new terminal coloring
settings.
(grub_gfxterm_init): Added init for bitmap.
(grub_gfxterm_fini): Added destroy for bitmap.
(redraw_screen_rect): Updated to use background bitmap and new
terminal coloring.
(scroll_up): Added optimization for case when there is no bitmap.
(grub_gfxterm_cls): Fixed to use correct background color.
(grub_virtual_screen_setcolorstate): Changed to use new terminal
coloring.
(grub_virtual_screen_setcolor): Likewise.
(grub_virtual_screen_getcolor): Added.
(grub_gfxterm_background_image_cmd): Likewise.
(grub_video_term): Added setcolor and getcolor.
(MOD_INIT): Added registration of background_image command.
(MOD_TERM): Added unregistration for background_image command.
* include/grub/term.h (struct grub_term): Add `getcolor' function.
(grub_getcolor): New function.
* kern/term.c (grub_getcolor): New function.
* normal/menu.c (GRUB_COLOR_MENU_NORMAL): New macro.
(GRUB_COLOR_MENU_HIGHLIGHT): New macro.
(print_entry): Set normal and highlight colors to
`GRUB_COLOR_MENU_NORMAL' and `GRUB_COLOR_MENU_HIGHLIGHT',
respectively, before printing and restore them to old
values afterwards.
(grub_menu_init_page): Likewise. Fill an additional colored space
that would otherwise be left blank.
* term/efi/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/console.c (grub_console_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/ieee1275/ofconsole.c (grub_ofconsole_getcolor): New function.
(struct grub_console_term.getcolor): New variable.
* term/i386/pc/serial.c (grub_serial_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vesafb.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/i386/pc/vga.c (grub_vga_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* term/gfxterm.c (grub_virtual_screen_setcolor): Remove function.
(struct grub_console_term.setcolor): Remove variable.
* configure.ac: Search for possible unifont.hex locations, and
define UNIFONT_HEX if found.
* Makefile.in (UNIFONT_HEX): Define variable.
(DATA): Rename to ...
(PKGLIB): ... this. Update all users.
(PKGDATA): New variable.
(pkgdata_IMAGES): Rename to ...
(pkglib_IMAGES): ... this. Update all users.
(pkgdata_MODULES): Rename to ...
(pkglib_MODULES): ... this. Update all users.
(pkgdata_PROGRAMS): Rename to ...
(pkglib_PROGRAMS): ... this. Update all users.
(pkgdata_DATA): Rename to ...
(pkglib_DATA): ... this. Update all users.
(CLEANFILES): Redefine to `$(pkglib_DATA) $(pkgdata_DATA)'.
(unicode.pff, ascii.pff): New rules.
(all-local): Add `$(PKGDATA)' dependency.
(install-local): Process `$(PKGDATA)'.
* util/update-grub_lib.in (font_path): Search for *.pff files in
a few more locations, including `${pkgdata}'.
* util/grub-mkdevicemap.c (make_device_map): Iterate up to 20 for
IDE disk check, since Linux is known to support 20 IDE disks.
Reported by Colin Watson.
linker. If yes, add it to TARGET_LDFLAGS. Build ID causes
objcopy to generate incorrect binary files (binutils
2.17.50.0.18-1 as shipped by Fedora 8).
* aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Use LDFLAGS when
linking, so that build ID doesn't break the test.
* util/console.c (grub_ncurses_getkey): Change curses KEY_* mapping,
now return control chars instead of GRUB_CONSOLE_KEY_* constants.
This fixes the problem that function keys did not work in grub-emu.
* disk/host.c (grub_host_open): Remove attribute unused from
name parameter. Add check for "host". This fixes the problem
that grub-emu does not find partitions.
* include/grub/i386/efi/machine.h: New file.
* include/grub/i386/linuxbios/machine.h: Likewise.
* include/grub/i386/pc/machine.h: Likewise.
* include/grub/powerpc/ieee1275/machine.h: Likewise.
* include/grub/sparc64/ieee1275/machine.h: Likewise.
* term/i386/pc/serial.c: Include <grub/machine/machine.h>.
(serial_hw_io_addr): New variable.
(serial_hw_get_port): Obtain port address from `serial_hw_io_addr'
instead of `(unsigned short *) 0x400'.
* kern/disk.c (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): New variables.
* include/grub/disk.h (grub_disk_firmware_fini)
(grub_disk_firmware_is_tainted): Likewise.
* disk/i386/pc/biosdisk.c (GRUB_MOD_FINI(biosdisk)): Moved from here ...
(grub_disk_biosdisk_fini): ... to here.
(GRUB_MOD_FINI(biosdisk)): Implement using grub_disk_biosdisk_fini().
(GRUB_MOD_INIT(biosdisk)): Abort when `grub_disk_firmware_is_tainted'
is set. Register grub_disk_biosdisk_fini() in
`grub_disk_firmware_fini'.
* disk/ata.c: Remove `<grub/machine/biosdisk.h>'.
(GRUB_MOD_INIT(ata)): Remove grub_biosdisk_fini() call.
Use `grub_disk_firmware_is_tainted' and `grub_disk_firmware_fini'
to finish existing firmware disk interface.
* conf/i386-linuxbios.rmk (pkgdata_MODULES): Add `ata.mod'.
(ata_mod_SOURCES): New variable.
(ata_mod_CFLAGS): Likewise.
(ata_mod_LDFLAGS): Likewise.
* term/i386/pc/vga_text.c: Include <grub/cpu/io.h>.
(CRTC_ADDR_PORT): New macro.
(CRTC_DATA_PORT): Likewise.
(CRTC_CURSOR): Likewise.
(CRTC_CURSOR_ADDR_HIGH): Likewise.
(CRTC_CURSOR_ADDR_LOW): Likewise.
(update_cursor): New function.
(grub_console_real_putchar): Call `update_cursor'.
(grub_console_gotoxy): Likewise.
(grub_console_cls): Set the default color when clearing the
screen.
(grub_console_setcursor): Implemented.
* disk/ata.c (grub_ata_pio_read): Don't wait for the command to
become activate.
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Wait after issuing an ATA command.
(grub_atapi_packet): Likewise.
(grub_ata_identify): Likewise.
(grub_ata_readwrite): Likewise.
* disk/ata.c (grub_ata_pio_read): Detect and return the error code.
(grub_ata_pio_write): Likewise.
(grub_ata_readwrite): Use `grub_error', instead of
returning `grub_errno'.
* include/grub/i386/pc/init.h (grub_lower_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_lower_mem): ... to here.
* include/grub/i386/pc/init.h (grub_upper_mem): Moved from here ...
* include/grub/i386/pc/memory.h (grub_upper_mem): ... to here.
* include/grub/i386/pc/memory.h: Include `<grub/symbol.h>' and
`<grub/types.h>'.
* loader/i386/pc/multiboot.c: Include `<grub/machine/memory.h>'.
* genmk.rb (Image): Copy `extra_flags' from here ...
(PModule): ... to here. Use it in `#{obj}: #{src}' rule.
* commands/i386/cpuid.c (grub_cmd_cpuid): Add __attribute__ ((unused))
to `argc' and `args' arguments.
* kern/i386/loader.S: New file.
* kern/i386/pc/startup.S (grub_linux_prot_size): Moved from here ...
* kern/i386/loader.S (grub_linux_prot_size)... to here.
* kern/i386/pc/startup.S (grub_linux_tmp_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_tmp_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_real_addr): Moved from here ...
* kern/i386/loader.S (grub_linux_real_addr)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_zimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_zimage)... to here.
* kern/i386/pc/startup.S (grub_linux_boot_bzimage): Moved from here ...
* kern/i386/loader.S (grub_linux_boot_bzimage)... to here.
* kern/i386/pc/startup.S (grub_multiboot_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot_real_boot)... to here.
* kern/i386/pc/startup.S (grub_multiboot2_real_boot): Moved from here ...
* kern/i386/loader.S (grub_multiboot2_real_boot)... to here.
* kern/i386/realmode.S: New file.
* kern/i386/pc/startup.S (protstack): Moved from here ...
* kern/i386/realmode.S (protstack)... to here.
* kern/i386/pc/startup.S (gdt): Moved from here ...
* kern/i386/realmode.S (gdt)... to here.
* kern/i386/pc/startup.S (prot_to_real): Moved from here ...
* kern/i386/realmode.S (prot_to_real)... to here.
* kern/i386/pc/startup.S: Include `kern/i386/loader.S' and
`kern/i386/realmode.S'.
* normal/misc.c (grub_normal_print_device_info): Do not probe for
filesystem when dev->disk is unset.
Do probe for filesystem even when dev->disk->has_partitions is set.
In case a filesystem is found, always report it.
In case it isn't, if dev->disk->has_partitions is set, report that
a partition table was found instead of reporting that no filesystem
could be identified.
* kern/powerpc/ieee1275/init.c: Rename HEAP_LIMIT to HEAP_MAX_ADDR,
and make it easier to figure out.
Add HEAP_MIN_SIZE and HEAP_MAX_ADDR definitions.
(grub_claim_heap): Use HEAP_MAX_ADDR rather than taking a parameter.
Do not avoid claiming a region above HEAP_MAX_ADDR if that would
leave us with less than HEAP_MIN_SIZE total heap.
Avoid our total amount of heap to surpass HEAP_MAX_SIZE.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_test_flag): Detect
SmartFirmware version updates (as released by Sven Luther), and avoid
setting GRUB_IEEE1275_FLAG_NO_PARTITION_0 or
GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS unless the running version is
known broken.
Do not use devices at boot in chainloading.
* loader/i386/pc/chainloader.c (boot_drive): New variable.
(boot_part_addr): Likewise.
(grub_chainloader_boot): Simply call grub_chainloader_real_boot
with BOOT_DRIVE and BOOT_PART_ADDR.
(grub_chainloader_cmd): Set BOOT_DRIVE and BOOT_PART_ADDR.
Reported by Hitoshi Ozeki <h-ozeki@ck2.so-net.ne.jp>.
Patch from Simon Peter <dn.tlp@gmx.net>:
* genmk.rb (Utility): Append $(#{src}_DEPENDENCIES) to #{obj} targets.
* conf/i386-pc.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES. Replace grub-setup_DEPENDENCIES with
util/i386/pc/grub-setup.c_DEPENDENCIES.
* conf/i386-efi.rmk: Replace grub-probe_DEPENDENCIES with
util/grub-probe.c_DEPENDENCIES.
* conf/powerpc-ieee1275.rmk: Likewise.
for powerpc & i386-pc. This patch was more so started by Hollis
Blanchard getting multiboot 2 working for powerpc and I added to it
and cleaned it up.
One of the ideas with this patch is to keep everything under one
command for the user. So instead of having a "multiboot2" & "module2"
command, I created a proxy like mechanism so that you have only one
command for both multiboot 1 & 2 ... "multiboot". This is where
"loader/multiboot_loader.c" comes from. I could have integrated things
more but I figure the current approach will less likely break
anything.
So if your OS is multiboot 2 capable, the user would do the following
to load it up from a grub prompt:
grub> multiboot <location of kernel> <kernel args>
grub> module <some image> <multiboot tag> <image arguments>
grub> module <isome mage> <multiboot tag> <image arguments>
grub .....
The other thing that this patch does is it begins to make the
multiboot 1 code a bit more architecture agnostic so IF someone wanted
to implement it on another architecture they can.
A bit of file moving around and definition renaming is also apart of
this patch. I have also taken the time to make sure that it does not
break multiboot 1 loading on i386-pc. But mulitboot 2 may still need a
little more testing and work for i386-pc. Powerpc multiboot 2 has been
heavily tested and does work.
* geninitheader.sh: Process file specified in first parameter rather
than hardcoding grub_modules_init.lst.
* geninit.sh: Likewise. Also, construct header name dynamicaly rather
than hardcoding grub_modules_init.h.
* conf/common.rmk: Rename grub_modules_init.[ch] files associated with
grub-emu to grub_emu_init.[ch]. Add rules to build analogous
grub_probe_init.[ch] and grub_setup_init.[ch].
* conf/powerpc-ieee1275.rmk (grub_emu_DEPENDENCIES): Replace
grub_modules_init.h with grub_emu_init.h.
(grub_probe_DEPENDENCIES, grub_probe_SOURCES): Add new
grub_probe_init.[ch] files.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
(grub_setup_DEPENDENCIES, grub_setup_SOURCES): Add new
grub_setup_init.[ch] files.
* util/grub-emu.c: Replace grub_modules_init.h with grub_emu_init.h.
* util/grub-probe.c: Include grub_probe_init.h. Use grub_init_all()
to initialize modules rather than a list of hardcoded functions.
* util/i386/pc/grub-setup.c: Include grub_setup_init.h. Use
grub_init_all() to initialize modules rather than a list of hardcoded
functions.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): Add
GRUB_IEEE1275_FLAG_BROKEN_OUTPUT flag.
* kern/powerpc/ieee1275/cmain.c (grub_ieee1275_find_options): Set this
flag when running on SmartFirmware.
* term/ieee1275/ofconsole.c (grub_ofconsole_init): Avoid running
"output-device output" command when GRUB_IEEE1275_FLAG_BROKEN_OUTPUT
was set.
* kern/powerpc/ieee1275/openfw.c (grub_ieee1275_encode_devname):
Increase partno when GRUB_IEEE1275_FLAG_0_BASED_PARTITIONS flag is set,
rather than decreasing it.
* util/i386/pc/grub-setup.c (setup): When embedding is required, but
there's not enough space to do it, fail in the same way as when it
can't be done because there are no partitions.
* util/powerpc/ieee1275/grub-install.in: Improve error message shown
when nvsetenv failed.
* conf/i386-pc.rmk (CLEANFILES): Removed for grub-mkrescue,
because this rule is automatically generated.
(grub-mkrescue): Removed for the same reason as above.
* util/i386/efi/grub-install.in: Allow `grub_probe --target=partmap'
invocation to fail, in order to support partition-less media.
* util/i386/pc/grub-install.in: Likewise.
* util/powerpc/ieee1275/grub-install.in: Use grub-probe to determine
which fs or partmap modules are needed (akin to its sister scripts).
Also use grub-probe to get rid of unportable /proc/mounts check.
Print the same informational message that the other scripts do, before
exitting.
* util/update-grub_lib.in (font_path): New function. Determine wether
a font file can be found and, if so, echo the GRUB path to it.
* util/update-grub.in: Handle multiple terminals depending on user
input, platform availability and font file presence. Propagate
variables of our findings to /etc/grub.d/ children.
* util/grub.d/00_header.in: Handle multiple terminals, based on
environment setup by update-grub.
* include/grub/i386/pc/kernel.h: Define GRUB_KERNEL_MACHINE_DATA_END to
indicate end of data section in kernel image.
* include/grub/i386/efi/kernel.h: Define GRUB_KERNEL_MACHINE_PREFIX and
GRUB_KERNEL_MACHINE_DATA_END.
* kern/i386/pc/startup.S: Do not initialize grub_prefix, only reserve
space for it.
* kern/i386/efi/startup.S: Likewise.
* util/i386/pc/grub-mkimage.c: Initialize grub_prefix to /boot/grub
during image generation. Implement --prefix option to override this
patch.
* util/i386/efi/grub-mkimage.c: Likewise.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Split
code to make path relative to its root into a separate function.
* util/i386/pc/grub-install.in: Use newly provided
make_system_path_relative_to_its_root() to convert ${grubdir}, then
pass the result to grub-install --prefix.
* include/grub/util/misc.h: Define DEFAULT_DIRECTORY and
DEFAULT_DEVICE_MAP.
* util/grub-emu.c: Use above definitions from misc.h instead of
defining them.
* util/grub-mkdevicemap.c: Likewise.
* util/i386/pc/grub-setup.c: Likewise.
* util/grub-probe.c: Likewise.
(probe): Abort with grub_util_error() when either
grub_guess_root_device or grub_util_get_grub_dev fails.
* normal/command.c (grub_command_execute): Use NULL rather than 0 for
"pager" assignment.
* util/biosdisk.c (grub_util_biosdisk_get_grub_dev): Likewise for
"pcdata".
* util/grub-probe.c (probe): Likewise for "drive_name".
* util/i386/pc/grub-mkrescue.in: Add "set -e".
Add --pkglibdir=DIR option to override pkglibdir.
Mention --image-type=TYPE in help output.
Fix --grub-mkimage (it was a no-op).
Abort gracefuly when no parameter is given.
* util/update-grub_lib.in (convert_system_path_to_grub_path): Abort if
file doesn't exist, or if it is in a filesystem grub can't read.
* util/update-grub.in: Set fallback for GRUB_FS check to "unknown". Do
not abort if GRUB_DRIVE could not be defined. Rearrange generated
header comment to fit in 80 columns when the variables are resolved.
* util/grub.d/00_header.in: Only set root variable when GRUB_DRIVE
could be identified by update-grub. Remove redundant check for
unifont.pff existance (since convert_system_path_to_grub_path now
handles that).
* conf/powerpc-ieee1275.rmk: Enable grub-mkdevicemap and grub-probe.
* include/grub/partition.h: Declare grub_apple_partition_map_init and
grub_apple_partition_map_fini.
* util/biosdisk.c
(grub_util_biosdisk_open): Replace BLKGETSIZE with BLKGETSIZE64 (needed
to access >2 TiB disks).
Print disk->total_sectors with %llu instead of %lu, since this
variable is always 64-bit (prevents wrong disk size from being displayed
on either >2 TiB disk or big-endian CPU).
(grub_util_biosdisk_get_grub_dev): Convert gpt_partition_map handling
into a generic case that supports all (sane) partition maps.
Stop using grub_cpu_to_le32() on dos_part / bsd_part since it actually
breaks big-endian.
* util/grub-probe.c: Call grub_apple_partition_map_init() before probe()
and grub_apple_partition_map_fini() after that.
* util/update-grub_lib.in: New file.
* DISTLIST: Add update-grub_lib.in.
* conf/common.rmk: Generate update-grub_lib and install it in
$(lib_DATA).
* Makefile.in: Add install routine for $(lib_DATA).
* util/grub.d/00_header.in: Use convert_system_path_to_grub_path()
function provided by update-grub_lib to support arbitrary paths of
unifont.pff.
* util/update-grub.in: Use convert_system_path_to_grub_path() to
initialize GRUB_DRIVE_BOOT and GRUB_DRIVE_BOOT_GRUB variables.
* util/biosdisk.c (linux_find_partition): Allocate real_dev on the
stack instead of on the heap.
* kern/disk.c (grub_disk_read): Make sure tmp_buf is big enough
before doing a read on it.
* configure.ac: Only use -fno-stack-protector for the target
environment.
* util/getroot.c (grub_guess_root_device): Remove RAID and LVM
code, first search for device in /dev/mapper, then in /dev.
(grub_util_get_grub_dev): New function.
* include/grub/util/getroot.h (grub_util_get_grub_dev): Add
prototype.
* util/grub-probe.c (probe): Remove check for RAID, call
grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/grub-emu.c (main): Call grub_util_get_grub_dev() instead of
grub_util_biosdisk_get_grub_dev().
* util/i386/pc/grub-setup.c (main): Likewise.
* DISTLIST: Update for the latest changes.
* conf/i386-pc.rmk: Use the new paths for util/getroot.c,
util/grub-mkdevicemap.c, util/grub-probe.c and util/biosdisk.c.
* util/grub-emu.c: Replace grub/i386/pc/util/biosdisk.h with
grub/util/biosdisk.h.
* util/i386/pc/grub-setup.c: Replace grub/machine/util/biosdisk.h with
grub/util/biosdisk.h.
* include/grub/i386/pc/util/biosdisk.h: Moved to ...
* include/grub/util/biosdisk.h: ... here.
* util/i386/pc/biosdisk.c: Moved to ...
* util/biosdisk.c: ... here.
* util/i386/pc/getroot.c: Moved to ...
* util/getroot.c: ... here.
* util/i386/pc/grub-mkdevicemap.c: Moved to ...
* util/grub-mkdevicemap.c: ... here.
* util/i386/pc/grub-probe.c: Moved to ...
* util/grub-probe.c: ... here.
* util/update-grub.in: Fix a few assumptions about the devices holding
/, /boot and /boot/grub being the same.
* util/grub.d/00_header.in: Likewise.
* util/grub.d/10_hurd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/10_linux.in: Implement Linux image sorting with arbitrary
patterns. Use that to define the `.old' suffix as older than `'.
* util/grub.d/00_header.in: Set default gfxmode to `800x600x16'.
* util/update-grub.in: Add a reference to ${sysconfdir}/default/grub in
the grub.cfg header message.
* util/update-grub.in: Create device.map if it doesn't already exist,
before attempting to run grub-probe.
Check for grub-probe and grub-mkdevicemap with the same code
grub-install is using.
Remove test mode.
* util/i386/pc/grub-probe.c: Add `grub-probe -t partmap' parameter to
determine partition map module.
* util/i386/pc/grub-install.in: Use this feature to decide which
partition module to load, instead of hardcoding pc and gpt.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add partmap/gpt.c.
(grub_probe_SOURCES): Likewise.
* util/i386/pc/biosdisk.c (grub_util_biosdisk_get_grub_dev): Detect
GPT and initialize dos_part and bsd_part accordingly.
* util/i386/pc/grub-setup.c (setup): Ditto for install_dos_part and
install_bsd_part.
(main): Activate gpt module for use during partition identification,
and deactivate it afterwards.
* util/i386/pc/grub-install.in: Add gpt module to core.img.
* util/i386/pc/grub-probe.c (main): Activate gpt module for use during
partition identification, and deactivate it afterwards.
* util/grub-emu.c: Move initialization functions
grub_util_biosdisk_init() and grub_init_all() before
grub_util_biosdisk_get_grub_dev(), which relies on them.
./configure --program-transform-name="s/grub/grub2/"
And the installed files (in this case for i386-pc) will be:
/usr/lib/grub2/i386-pc/*
/usr/local/sbin/grub2-emu
/usr/local/sbin/grub2-install
...etc
Also grub2-install place boot files in "/boot/grub2"
This allows easy integration into distributions as it allows grub2 to
sit side by side with a grub legacy install without.
* fs/ext2.c (EXT2_GOOD_OLD_REVISION): New macro.
(EXT2_GOOD_OLD_INODE_SIZE): Likewise.
(EXT2_REVISION): Likewise.
(EXT2_INODE_SIZE): Likewise.
(struct grub_ext2_block_group): Added a missing member
"used_dirs".
(grub_ext2_read_inode): Divide by the inode size in a superblock
instead of 128 to obtain INODES_PER_BLOCK.
Use the macro EXT2_INODE_SIZE instead of directly using
SBLOCK->INODE_SIZE.
* fs/ext2.c (grub_ext2_read_inode): Use the inode size in a
superblock instead of the structure size to compute an
offset. This fixes the problem that GRUB could not read a
filesystem when inode size is different from 128-byte.
* conf/powerpc-ieee1275.rmk (kernel_elf_LDFLAGS): Link at 64KB.
* kern/powerpc/ieee1275/init.c (_end): Add declaration.
(_start): Likewise.
(grub_arch_modules_addr): Return address after `_end'.
* util/powerpc/ieee1275/grub-mkimage.c: Include grub/misc.h.
(load_modules): Use new parameter as `p_paddr' and `p_vaddr'.
(add_segments): Calculate `_end' from phdr size and location.
(ALIGN_UP): Moved to ...
* include/grub/misc.h: here.
* include/grub/powerpc/ieee1275/kernel.h (GRUB_IEEE1275_MOD_ALIGN):
New macro.
(GRUB_IEEE1275_MODULE_BASE): Removed.
* Makefile.in (enable_grub_emu): New variable.
* configure.ac (--enable-grub-emu): New option.
Do the checks for (n)curses only if `--enable-grub-emu' is requested.
* conf/i386-efi.rmk (sbin_UTILITIES): Add `grub-emu' only if requested.
* conf/i386-pc.rmk: Likewise.
* conf/powerpc-ieee1275.rmk: Likewise.
* conf/sparc64-ieee1275.rmk (bin_UTILITIES): Likewise.
* include/grub/err.h (grub_err_t): Add `GRUB_ERR_MENU'.
* kern/env.c (grub_env_unset): Don't free the member `value' when
the type is GRUB_ENV_VAR_DATA, in this case it's a user defined
pointer.
* normal/main.c (current_menu): Removed.
(free_menu): Unset the `menu' environment variable.
(grub_normal_menu_addentry): Make use of the environment variable
`menu', instead of using the global `current_menu'. Allocate
memory for the sourcecode of this entry.
(read_config_file): New argument `nested', changed all callers.
Only in the case of a new context, initialize a new menu. Set the
`menu' environment variable.
(grub_normal_execute): Don't set and unset the environment
variable `menu' here anymore. Only free the menu when leaving the
context.
* util/i386/pc/biosdisk.c (linux_find_partition): Fixed a memory
leak.
* kern/disk.c (grub_disk_read): When there is a read error, always
try to read only the necessary data.
* conf/i386-pc.rmk (grub_probe_SOURCES): Add disk/lvm.c and
disk/raid.c.
* include/grub/disk.h [GRUB_UTIL] (grub_raid_init): New
prototype.
[GRUB_UTIL] (grub_raid_fini): Likewise.
[GRUB_UTIL] (grub_lvm_init): Likewise.
[GRUB_UTIL] (grub_lvm_fini): Likewise.
* util/i386/pc/grub-probe.c (probe): Check whether DEVICE_NAME is
RAID device and copy DEVICE_NAME to DRIVE_NAME in that case.
(main): Call grub_raid_init(), grub_lvm_init(), grub_lvm_fini()
and grub_raid_fini().
* kern/elf.c (grub_elf_file): Call grub_file_seek. Call
grub_error_push and grub_error_pop in the error-handling path.
(grub_elf32_load_segment): Only call grub_file_read with non-zero
length.
2006-10-18 Jeroen Dekkers <jeroen@dekkers.cx>
* disk/lvm.c: Rename VGS to VG_LIST.
(grub_lvm_iterate): Change VGS->LV to VG-LV.
(grub_lvm_open): Likewise.
Thanks to Michael Guntsche for finding this bug.
* util/i386/pc/grub-probe.c (probe): Print DEVICE_NAME instead of
DRIVE_NAME when grub_util_biosdisk_get_grub_dev fails. Open
DRIVE_NAME instead of DEVICE_NAME. Make sure that DEVICE_NAME and
DRIVE_NAME are always freed.
* util/i386/pc/biosdisk.c (make_device_name): Add one into
DOS_PART, as a DOS partition is counted from one instead of zero
now. Reported by Robert Millan.
* util/i386/pc/getroot.c (grub_guess_root_device): Stop using
grub_util_biosdisk_get_grub_dev to convert system device to GRUB device.
* util/grub-emu.c (main): Use grub_util_biosdisk_get_grub_dev with the
string returned by grub_guess_root_device.
* util/i386/pc/grub-setup.c: Likewise.
* util/i386/pc/grub-probefs.c: Likewise.
* util/i386/pc/grub-probefs.c: Rename to ...
* util/i386/pc/grub-probe.c: ... this.
* DISTLIST: Remove grub-probefs, add grub-probe.
* conf/i386-efi.rmk: Likewise.
* conf/i386-pc.rmk: Likewise.
* util/i386/pc/grub-install.in: Likewise.
* util/i386/pc/grub-probe.c: Add --target=(fs|device|drive) option to
choose which information we want to print.
* DISTLIST: Added commands/echo.c, disk/lvm.c, disk/raid.c,
include/grub/bitmap.h, include/grub/lvm.h, include/grub/raid.h,
include/grub/i386/pc/vbeutil.h, include/grub/util/lvm.h,
include/grub/util/raid.h, util/lvm.c, util/raid.c, video/bitmap.c,
video/readers/tga.c and video/i386/pc/vbeutil.c.
2006-10-14 Jeroen Dekkers <jeroen@dekkers.cx>
Added support for RAID and LVM.
* disk/lvm.c: New file.
* disk/raid.c: Likewise.
* include/grub/lvm.h: Likewise.
* include/grub/raid.h: Likewise.
* include/grub/util/lvm.h: Likewise.
* include/grub/util/raid.h: Likewise.
* util/lvm.c: Likewise.
* util/raid.c: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_RAID_ID and GRUB_DISK_DEVICE_LVM_ID.
(grub_disk_get_size): New prototype.
* kern/disk.c (grub_disk_open): Check whether grub_partition_probe()
returns a partition.
(grub_disk_get_size): New function.
* kern/i386/pc/init.c (make_install_device): Copy the prefix
verbatim if grub_install_dos_part is -2.
* util/i386/pc/getroot.c (grub_guess_root_device): Support RAID
and LVM devices.
* util/i386/pc/grub-setup.c (setup): New argument
MUST_EMBED. Force embedding of GRUB when the argument is
true. Close FILE before returning.
(main): Add support for RAID and LVM.
* conf/common.rmk: Add RAID and LVM modules.
* conf/i386-pc.rmk (grub_setup_SOURCES): Add util/raid.c and
util/lvm.c.
(grub_emu_SOURCES): Add disk/raid.c and disk/lvm.c.
* kern/misc.c (grub_strstr): New function.
* include/grub/misc.h (grub_strstr): New prototype.
* include/grub/powerpc/libgcc.h (__floatdisf): New prototype.
(__cmpdi): Likewise.
* kern/powerpc/ieee1275/openfw.c (grub_devalias_iterate): Pass 0 as
`flags' to `grub_ieee1275_next_property'. Change `pathlen' to type
`grub_ssize_t'.
* kern/powerpc/ieee1275/cmain.c: include grub/misc.h.
* loader/powerpc/ieee1275/linux.c (grub_linux_boot): Change `actual'
to type `grub_ssize_t'.
(grub_rescue_cmd_linux): Cast -1 to `grub_off_t'.
Import from GRUB Legacy (lib/device.c):
* util/i386/pc/grub-mkdevicemap.c (get_i2o_disk_name): New function.
(init_device_map) [__linux__]: Add support for I2O devices.
* util/i386/pc/grub-install.in: Skip menu.lst when removing
/boot/grub/*.lst.
* util/i386/pc/getroot.c: Don't recurse into dotdirs (e.g. ".static").
* util/i386/pc/grub-mkdevicemap.c: Make sure the floppy device exists
before adding it to device.map.
* genmk.rb: Let GCC generate dependenceies the first time it
compiles a file; using the -MD option.
* conf/common.mk: Regenerate.
* conf/i386-pc.mk: Likewise.
* conf/i386-efi.mk: Likewise.
* conf/powerpc-ieee1275.mk: Likewise.
* conf/sparc64-ieee1275.mk: Likewise.
Move the prototypes of grub_setjmp and grub_longjmp to
cpu/setjmp.h, so that each architecture may specify different
attributes.
* include/grub/i386/setjmp.h (grub_setjmp): New prototype.
(grub_longjmp): Likewise.
* include/grub/powerpc/setjmp.h (grub_setjmp): Likewise..
(grub_longjmp): Likewise.
* include/grub/sparc64/setjmp.h (grub_setjmp): Likewise..
(grub_longjmp): Likewise.
* include/grub/setjmp.h [!GRUB_UTIL] (grub_setjmp): Removed.
[!GRUB_UTIL] (grub_longjmp): Removed.
* disk/i386/pc/biosdisk.c (struct grub_biosdisk_drp): Moved to ...
(struct grub_biosdisk_dap): Likewise.
* include/grub/i386/pc/biosdisk.h: ... to here. Also corrected
linkage settings for all functions.
* util/misc.c: Include config.h.
[!HAVE_MEMALIGN]: Do not include malloc.h.
(grub_memalign): Use posix_memalign, if present. Then, use
memalign, if present. Otherwise, emit an error.
* util/grub-emu.c: Do not include malloc.h.
* include/grub/util/misc.h: Include unistd.h. This is required for
FreeBSD, because off_t is defined in unistd.h. Reported by Harley
D. Eades III <hde@foobar-qux.org>.
* configure.ac (AC_GNU_SOURCE): Added.
(AC_CHECK_FUNCS): Check posix_memalign and memalign for the host
type.
* include/grub/types.h (grub_host_addr_t): Rename to
grub_target_addr_t.
(grub_host_off_t): Rename to grub_target_off_t.
(grub_host_size_t): Rename to grub_target_size_t.
(grub_host_ssize_t): Rename to grub_target_ssize_t.
Refer to GRUB_TARGET_SIZEOF_VOID_P to define those variables.
* include/grub/kernel.h (struct grub_module_header): Change type
of OFFSET to grub_target_off_t and type of SIZE to grub_target_size_t.
(grub_module_info): Likewise.
* loader/i386/pc/linux.c (grub_rescue_cmd_initrd): The conditional
of checking LINUX_MEM_SIZE was reverse. Reported by Jesus
Velazquez <jesus.velazquez@gmail.com>.
Count partitions from 1 instead of 0 in the string representation
of partitions. Still use 0-based internally.
* partmap/sun.c (grub_sun_is_valid): A cosmetic change.
(sun_partition_map_iterate): Use grub_partition_t instead of
struct grub_partition *. Cast DESC->START_CYLINDER to
grub_uint64_t after converting the endian.
(sun_partition_map_probe): Subtract 1 for PARTNUM.
(sun_partition_map_get_name): Add 1 to P->INDEX.
* partmap/pc.c (grub_partition_parse): Subtract 1 for
PCDATA->DOS_PART.
(pc_partition_map_get_name): Add 1 into PCDATA->DOS_PART.
* partmap/gpt.c (gpt_partition_map_iterate): Initialize PARTNO to
zero instead of one.
(gpt_partition_map_probe): Subtract 1 for PARTNUM.
(gpt_partition_map_get_name): Add 1 into P->INDEX.
* partmap/apple.c (apple_partition_map_iterate): Change the type
of POS to unsigned.
(apple_partition_map_probe): Subtract 1 for PARTNUM.
(apple_partition_map_get_name): Add 1 into P->INDEX.
* partmap/amiga.c (amiga_partition_map_iterate): Change the type
of POS to unsigned.
(amiga_partition_map_iterate): Cast NEXT to grub_off_t to
calculate the offset of a partition.
(amiga_partition_map_probe): Subtract 1 for PARTNUM.
(amiga_partition_map_get_name): Add 1 into P->INDEX.
* partmap/acorn.c (acorn_partition_map_find): Change the type of
SECTOR to grub_disk_addr_t.
(acorn_partition_map_iterate): Likewise.
(acorn_partition_map_probe): Subtract 1 for PARTNUM.
Change the type of SECTOR to grub_disk_addr_t. Declare P on the
top.
(acorn_partition_map_get_name): Add 1 into P->INDEX.
* kern/i386/pc/init.c (make_install_device): Add 1 into
GRUB_INSTALL_DOS_PART.
* fs/iso9660.c (grub_iso9660_mount): Fixed a reversed
conditional.
Clean up the code to support 64-bit addressing in disks and
files. This change is not enough for filesystems yet.
* util/i386/pc/grub-setup.c (struct boot_blocklist): Change the
type of "start" to grub_uint64_t.
(setup): Change the types of KERNEL_SECTOR and FIRST_SECTOR to
grub_disk_addr_t * and grub_disk_addr_t. Fix the format string in
save_first_sector and save_blocklists. Use grub_le_to_cpu64 to
convert addresses.
* util/i386/pc/biosdisk.c (open_device): Change the type of SECTOR
to grub_disk_addr_t.
* partmap/gpt.c (gpt_partition_map_iterate): Fix the format
string.
* partmap/pc.c (pc_partition_map_iterate): Likewise.
* partmap/amiga.c (amiga_partition_map_iterate): Cast RDSK.MAGIC
to char *.
* normal/script.c (grub_script_parse): Remove unused MEMFREE.
* normal/parser.y (YYLTYPE_IS_TRIVIAL): New macro.
* normal/lexer.c (grub_script_yyerror): Specify unused to LEX.
* loader/i386/pc/multiboot.c (grub_multiboot_load_elf64): Cast -1
to grub_off_t, to detect an error from grub_file_seek.
(grub_multiboot_load_elf32): Likewise.
* kern/misc.c (grub_strtoul): Use grub_strtoull. Return the
maximum unsigned long value when an overflow is detected.
(grub_strtoull): New function.
(grub_divmod64): Likewise.
(grub_lltoa): use grub_divmod64.
* kern/fs.c (struct grub_fs_block): Change the type of "offset" to
grub_disk_addr_t.
(grub_fs_blocklist_open): Increase P if P is not NULL to advance
the pointer to next character. Use grub_strtoull instead of
grub_strtoul.
(grub_fs_blocklist_read): Change the types of SECTOR, OFFSET and
SIZE to grub_disk_addr_t, grub_off_t and grub_size_t,
respectively.
* kern/file.c (grub_file_read): Prevent an oveflow of LEN, as the
return value is signed.
(grub_file_seek): Change the type of OLD to grub_off_t. Do not
test if OFFSET is less than zero, as OFFSET is unsigned now.
* kern/disk.c (struct grub_disk_cache): Change the type of
"sector" to grub_disk_addr_t.
(grub_disk_cache_get_index): Change the type of SECTOR to
grub_disk_addr_t. Calculate the hash with SECTOR casted to
unsigned after shifting.
(grub_disk_cache_invalidate): Change the type of SECTOR to
grub_disk_addr_t.
(grub_disk_cache_unlock): Likewise.
(grub_disk_cache_store): Likewise.
(grub_disk_check_range): Change the types of SECTOR, OFFSET, SIZE,
START and LEN to grub_disk_addr_t *, grub_off_t *, grub_size_t,
grub_disk_addr_t and grub_uint64_t, respectively.
(grub_disk_read): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of START_SECTOR, LEN and
POS to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
(grub_disk_write): Use an unsigned variable REAL_OFFSET for the
body, as the value of OFFSET is tweaked by
grub_disk_check_range. Change the types of LEN and N to
grub_size_t.
* io/gzio.c (struct grub_gzio): Change the types of "data_offset"
and "saved_offset" to grub_off_t.
(test_header): Cast BUF to char *.
(get_byte): Cast GZIO->DATA_OFFSET to grub_off_t. Cast GZIO->INBUF
to char *.
(grub_gzio_read): Change the types of OFFSET and SIZE to
grub_off_t and grub_size_t, respectively.
* include/grub/i386/pc/boot.h (GRUB_BOOT_MACHINE_FORCE_LBA):
Removed.
(GRUB_BOOT_MACHINE_BOOT_DRIVE): Changed to 0x4c.
(GRUB_BOOT_MACHINE_KERNEL_ADDRESS): Changed to 0x40.
(GRUB_BOOT_MACHINE_KERNEL_SEGMENT): Changed to 0x42.
(GRUB_BOOT_MACHINE_DRIVE_CHECK): Changed to 0x4e.
(GRUB_BOOT_MACHINE_LIST_SIZE): Increased to 12.
* include/grub/types.h (grub_off_t): Unconditionally set to
grub_uint64_t.
(grub_disk_addr_t): Changed to grub_uint64_t.
* include/grub/partition.h (struct grub_partition): Change the
types of "start", "len" and "offset" to grub_disk_addr_t,
grub_uint64_t and grub_disk_addr_t, respectively.
(grub_partition_get_start): Return grub_disk_addr_t.
(grub_partition_get_len): Return grub_uint64_t.
* include/grub/misc.h (grub_strtoull): New prototype.
(grub_divmod64): Likewise.
* include/grub/fshelp.h (grub_fshelp_read_file): Change the types
of SECTOR, LEN and FILESIZE to grub_disk_addr_t, grub_size_t and
grub_off_t, respectively.
All callers and references changed.
* include/grub/fs.h (struct grub_fs): Change the type of LEN to
grub_size_t in "read".
All callers and references changed.
* include/grub/file.h (struct grub_file): Change the types of
"offset" and "size" to grub_off_t and grub_off_t,
respectively. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_file_read): Change the type of LEN to grub_size_t.
(grub_file_seek): Return grub_off_t. Change the type of OFFSET to
grub_off_t.
(grub_file_size): Return grub_off_t.
(grub_file_tell): Likewise.
All callers and references changed.
* include/grub/disk.h (struct grub_disk_dev): Change the types of
SECTOR and SIZE to grub_disk_addr_t and grub_size_t in "read" and
"write".
(struct grub_disk): Change the type of "total_sectors" to
grub_uint64_t. Change the type of SECTOR to grub_disk_addr_t in
"read_hook".
(grub_disk_read): Change the types of SECTOR, OFFSET and SIZE to
grub_disk_addr_t, grub_off_t and grub_size_t, respectively.
(grub_disk_write): Likewise.
All callers and references changed.
* fs/iso9660.c (grub_iso9660_susp_iterate): Cast parameters to
char * for grub_strncmp to silence gcc.
(grub_iso9660_mount): Likewise.
(grub_iso9660_mount): Likewise.
(grub_iso9660_read_symlink): Likewise. Also, remove the nonsense
return statement.
(grub_iso9660_iterate_dir): Likewise.
(grub_iso9660_label): Cast DATA->VOLDESC.VOLNAME to char *.
* fs/hfs.c (grub_hfs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/hfsplus.c (grub_hfsplus_read_file): Likewise.
* fs/jfs.c (grub_jfs_read_file): Likewise.
* fs/minix.c (grub_jfs_read_file): Likewise.
* fs/sfs.c (grub_jfs_read_file): Likewise.
* fs/ufs.c (grub_jfs_read_file): Likewise.
* fs/xfs.c (grub_jfs_read_file): Likewise.
* fs/fat.c (grub_fat_read_data): Change the types of SECTOR, LEN
and SIZE to grub_disk_addr_t, grub_size_t and grub_size_t,
respectively.
* fs/ext2.c (grub_ext2_read_block): When an error happens, set
BLKNR to -1 instead of returning GRUB_ERRNO.
(grub_ext2_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* fs/affs.c (grub_affs_read_file): Change the types of SECTOR and
LEN to grub_disk_addr_t and grub_size_t, respectively.
* font/manager.c (grub_font_get_glyph): Cast BITMAP to char * for
grub_file_read.
* disk/ieee1275/ofdisk.c (grub_ofdisk_read): Fix the format
string. Do not cast SECTOR explicitly.
* disk/i386/pc/biosdisk.c (grub_biosdisk_open): Change the type of
TOTAL_SECTORS to grub_uint64_t. Do not mask DRP->TOTAL_SECTORS.
(grub_biosdisk_rw): Change the types of SECTOR and SIZE to
grub_disk_addr_t and grub_size_t, respectively. If the sector is
over 2TB and LBA mode is not supported, raise an error.
(get_safe_sectors): New function.
(grub_biosdisk_read): Use get_safe_sectors.
(grub_biosdisk_write): Likewise.
* disk/efi/efidisk.c (grub_efidisk_read): Fix the format string.
(grub_efidisk_write): Likewise.
* disk/loopback.c (delete_loopback): Cosmetic changes.
(grub_cmd_loopback): Likewise. Also, test NEWDEV->FILENAME
correctly.
(grub_loopback_open): Likewise.
(grub_loopback_read): Likewise. Also, change the type of POS to
grub_off_t, and fix the usage of grub_memset.
* commands/i386/pc/play.c: Include grub/machine/time.h.
* commands/ls.c (grub_ls_list_files): Use "llu" instead of "d" to
print FILE->SIZE.
* commands/configfile.c: Include grub/env.h.
* commands/cmp.c (grub_cmd_cmp): Do not use ERR, but use
GRUB_ERRNO directly instead. Change the type of POS to
grub_off_t. Follow the coding standard.
* commands/blocklist.c: Include grub/partition.h.
(grub_cmd_blocklist): Return an error if the underlying device is
not a disk. Take the starting sector of a partition into account,
if a partition is used.
* boot/i386/pc/diskboot.S (bootloop): Adapted to the new offset of
a length field.
(lba_mode): Support 64-bit addresses.
(chs_mode): Likewise.
(copy_buffer): Adapted to the new offsets of a length field and a
segment field.
(blocklist_default_start): Allocate 64-bit space.
* boot/i386/pc/boot.S (force_lba): Removed.
(boot_drive): Moved to under KERNEL_SECTOR.
(kernel_sector): Moved to under KENREL_SEGMENT. Allocate 64-bit
space.
(real_start): Set %si earlier. Remove code for FORCE_LBA, since it
is useless.
(lba_mode): Refactored to support a 64-bit address. More size
optimization.
(setup_sectors): Likewise.
* conf/common.rmk (grub_modules_init.lst): Depends on
$(MODSRCFILES). Grep only the files in $(MODSRCFILES). Make sure
that the target does not exist before producing.
(grub_modules_init.h): Remove the target before generating.
(grub_emu_init.c): Likewise.
* genmk.rb (PModule::rule): Add source files into MODSRCFILES.
* configure.ac: Don't set host_m32 for x86_64. Also reset LIBS
for the target-specific tests. Make sure that we also have the
up-to-date target variables for those tests.
* genmk.rb (Image::rule): Set FLAG to CFLAGS or ASFLAGS instead of
TARGET_CFLAGS or TARGET_ASFLAGS. There is no reason why
target-specific flags should be prefixed.
(PModule::rule): Likewise.
* include/grub/script.h (grub_script_cmdif): Renamed field 'bool' to
'exec_to_evaluate'. Renamed field 'true' to 'exec_on_true'. Renamed
field 'false' to 'exec_on_false'.
(grub_script_create_cmdif): Renamed argument names to reflect above
changes.
* normal/execute.c (grub_script_execute_cmdif): Likewise.
* normal/script.c (grub_script_create_cmdif): Likewise.
* fs/hfsplus.c (grub_hfsplus_btree_recoffset): Moved to near the
top.
(grub_hfsplus_btree_recptr): Likewise.
(grub_hfsplus_find_block): Do not take RETRY any longer. Use
FILEBLOCK both to pass a block number and store next block
number.
(grub_hfsplus_read_block): Rewritten heavily to support an extent
overflow file correctly. Specify errors appropriately, because
fshelp expects that GRUB_ERRNO is set when fails. Reuse
grub_hfsplus_btree_recptr to get the pointer to a found key.
(grub_hfsplus_btree_search): Return 1 instead of 0 when no match
is found.
* conf/i386-efi.rmk (pkgdata_MODULES): Added _linux.mod and
linux.mod.
(_linux_mod_SOURCES): New variable.
(_linux_mod_CFLAGS): Likewise.
(_linux_mod_LDFLAGS): Likewise.
(linux_mod_SOURCES): Likewise.
(linux_mod_CFLAGS): Likewise.
(linux_mod_LDFLAGS): Likewise.
* DISTLIST: Added loader/i386/efi/linux.c,
loader/i386/efi/linux_normal.c and
include/grub/i386/efi/loader.h.
* loader/i386/efi/linux.c: New file.
* loader/i386/efi/linux_normal.c: Likewise.
* include/grub/i386/efi/loader.h: Likewise.
* commands/blocklist.c: New file.
* DISTLIST: Added commands/blocklist.c.
* term/efi/console.c (grub_console_highlight_color): Use a lighter
color for the background, and a daker color for the foreground.
(grub_console_checkkey): Return READ_KEY.
(grub_console_cls): Set the background to
GRUB_EFI_BACKGROUND_BLACK temporarily to clean out the screen.
* kern/efi/efi.c (grub_efi_exit_boot_services): New function.
* include/grub/i386/linux.h (struct linux_kernel_params): Fixed
the size of "padding5", "hd0_drive_info" and "hd1_drive_info".
* include/grub/efi/efi.h (grub_efi_exit_boot_services): New
prototype.
* include/grub/efi/api.h (GRUB_EFI_TEXT_ATTR): Do not shift
BG. The spec is wrong again.
* include/grub/normal.h [GRUB_UTIL] (grub_blocklist_init): New
prototype.
[GRUB_UTIL] (grub_blocklist_fini): Likewise.
* conf/i386-pc.rmk (grub_emu_SOURCES): Added
commands/blocklist.c.
* conf/powerpc-ieee1275.rmk (grub_emu_SOURCES): Likewise.
* conf/common.rmk (pkgdata_MODULES): Added blocklist.mod.
(blocklist_mod_SOURCES): New variable.
(blocklist_mod_CFLAGS): Likewise.
(blocklist_mod_LDFLAGS): Likewise.