Now that the link array is deallocated when destroying nodes and the
explicit link removal has been dropped from the exynos driver there are
no further users of and no need for the icc_link_destroy() interface.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-24-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Now that all interconnect drivers have been converted to the new
provider registration API, the old racy interface can be removed.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-22-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144709.1542841-1-robh@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The commit 4529992c94 ("interconnect: qcom: osm-l3: Use
platform-independent node ids") made osm-l3 driver use
platform-independent IDs, removing the need to include platform headers.
Fixes: 4529992c94 ("interconnect: qcom: osm-l3: Use platform-independent node ids")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230103031159.1060075-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Since Qualcomm platforms have switched to the separate OSM_L3/EPSS
driver, old related defines became unused. Drop them now.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: 4529992c94 ("interconnect: qcom: osm-l3: Use platform-independent node ids")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230103045717.1079067-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Currently framework sets bw even when init bw requirements are zero during
provider registration, thus resulting bulk of set bw to hw.
Avoid this behaviour by skipping provider set bw calls if init bw is zero.
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Link: https://lore.kernel.org/r/1673647679-15216-1-git-send-email-quic_viveka@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230209101310.11942cd0@endymion.delvare
Signed-off-by: Georgi Djakov <djakov@kernel.org>
There is no longer any need to explicitly destroy node links as this is
now done when the node is destroyed as part of icc_nodes_remove().
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-17-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to trigger a NULL-pointer
deference when either a NULL pointer or not fully initialised node is
returned from exynos_generic_icc_xlate().
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 2f95b9d5cf ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make sure to add the newly allocated interconnect node to the provider
before adding the PM QoS request so that the node is freed on errors.
Fixes: 2f95b9d5cf ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-15-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 4e60a9568d ("interconnect: qcom: add msm8974 driver")
Cc: stable@vger.kernel.org # 5.5
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make sure to clean up and release resources properly also in case probe
fails when populating child devices.
Fixes: 57eb14779d ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
Cc: stable@vger.kernel.org # 6.0
Cc: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-10-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 62feb14ee8 ("interconnect: qcom: Consolidate interconnect RPM support")
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make sure to clean up and release resources properly also in case probe
fails when populating child devices.
Fixes: e39bf2972c ("interconnect: icc-rpm: Support child NoC device probe")
Cc: stable@vger.kernel.org # 5.17
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-7-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail:
of_icc_xlate_onecell: invalid index 0
cpu cpu0: error -EINVAL: error finding src node
cpu cpu0: dev_pm_opp_of_find_icc_paths: Unable to get path0: -22
qcom-cpufreq-hw: probe of 18591000.cpufreq failed with error -22
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 5bc9900add ("interconnect: qcom: Add OSM L3 interconnect provider support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-6-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: f0d8048525 ("interconnect: Add imx core driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-5-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider interface is inherently racy as
providers are expected to be added before being fully initialised.
Specifically, nodes are currently not added and the provider data is not
initialised until after registering the provider which can cause racing
DT lookups to fail.
Add a new provider API which will be used to fix up the interconnect
drivers.
The old API is reimplemented using the new interface and will be removed
once all drivers have been fixed.
Fixes: 11f1ceca70 ("interconnect: Add generic on-chip interconnect API")
Fixes: 87e3031b6f ("interconnect: Allow endpoints translation via DT")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-4-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The interconnect framework currently expects that providers are only
removed when there are no users and after all nodes have been removed.
There is currently nothing that guarantees this to be the case and the
framework does not do any reference counting, but refusing to remove the
provider is never correct as that would leave a dangling pointer to a
resource that is about to be released in the global provider list (e.g.
accessible through debugfs).
Replace the current sanity checks with WARN_ON() so that the provider is
always removed.
Fixes: 11f1ceca70 ("interconnect: Add generic on-chip interconnect API")
Cc: stable@vger.kernel.org # 5.1: 680f8666ba: interconnect: Make icc_provider_del() return void
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The node link array is allocated when adding links to a node but is not
deallocated when nodes are destroyed.
Fixes: 11f1ceca70 ("interconnect: Add generic on-chip interconnect API")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-2-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Change sm8550 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: e6f0d6a30f ("interconnect: qcom: Add SM8550 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-4-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
Fortunately this overallocates memory rather then allocating less memory
than required.
Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.
Fixes: 5bc9900add ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.
Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/mVV
-----END PGP SIGNATURE-----
Merge tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.3
Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.
Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (25 commits)
dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
interconnect: qcom: add a driver for sa8775p
dt-bindings: interconnect: qcom: document the interconnects for sa8775p
interconnect: qcom: add sdm670 interconnects
dt-bindings: interconnect: add sdm670 interconnects
dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
dt-bindings: interconnect: split SM8450 to own schema
dt-bindings: interconnect: split SC8280XP to own schema
dt-bindings: interconnect: split SC7280 to own schema
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
interconnect: qcom: sc8280xp: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sc7180: drop IP0 remnants
...
* icc-sa8775p
dt-bindings: interconnect: qcom: document the interconnects for sa8775p
interconnect: qcom: add a driver for sa8775p
dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
Link: https://lore.kernel.org/r/20230118140825.242544-2-brgl@bgdev.pl
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Commits 2f3724930e ("interconnect: qcom: sc7180: Drop IP0
interconnects") and 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0
interconnects") removed IP0 interconnects (and ipa-virt devices support)
in favour of the RPMH clocks. Follow this example for other platforms
defining IP0 RPMH resource. While we are at it, remove several leftover
from the mentioned patches.
* icc-ip0-migration:
interconnect: qcom: sdx55: drop IP0 remnants
interconnect: qcom: sc7180: drop IP0 remnants
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sc8280xp: Drop IP0 interconnects
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
Link: https://lore.kernel.org/r/20230109002935.244320-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platform. There are no actual users
of this interconnect. The IP0 resource will be handled by clk-rpmh
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-8-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platofm. There are no actual users
of this intercoonect. The IP0 resource will be handled by clk-rpmh
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-7-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platform. There are no actual users
of this interconnect. The IP0 resource will be handled by clk-rpmh
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-6-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platform. There are no actual users
of this interconnect. The IP0 resource will be handled by clk-rpmh
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-5-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Move the const ignore_list definition out of the
of_count_icc_providers() function. This prevents the following stack
frame size warnings if the list is expanded:
drivers/interconnect/core.c:1082:12: warning: stack frame size (1216) exceeds limit (1024) in 'of_count_icc_providers' [-Wframe-larger-than]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-4-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Drop two defines leftover from the commit 2f3724930e ("interconnect:
qcom: sc7180: Drop IP0 interconnects"), which dropped handling of the
IP0 resource in favour of handling it in the clk-rpmh driver.
Fixes: 2f3724930e ("interconnect: qcom: sc7180: Drop IP0 interconnects")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Drop two defines leftover from the commit 2fb251c265 ("interconnect:
qcom: sdx55: Drop IP0 interconnects"), which dropped handling of the IP0
resource in favour of handling it in the clk-rpmh driver.
Fixes: 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0 interconnects")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It turned out that - very unfortunately - msm8996 needs a binding
update, adding 2 more clocks to the A2NoC node. Use the _optional
variant of devm_clk_get to make sure old DTs will still probe with
newer versions of the driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20221210200353.418391-5-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The device tree reg starts at BUS_BASE + QoS_OFFSET, but the regmap
configs in the ICC driver had values suggesting the reg started at
BUS_BASE. Shrink them down (where they haven't been already, so for
providers where QoS_OFFSET = 0) to make sure they stay within their
window.
Fixes: 7add937f52 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20221210200353.418391-4-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
On eMMC devices the bootloader has no business enabling UFS clocks.
That results in a platform hang and hard reboot when trying to vote
on paths including MASTER_UFS and since sync_state guarantees that
it's done at boot time, this effectively prevents such devices from
booting. Fix that.
Fixes: 7add937f52 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20221210200353.418391-3-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in SM8550 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221202232054.2666830-3-abel.vesa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The SC8280XP currently shows depressing results in memory benchmarks.
Fix this by introducing support for the platform in the OSM (and EPSS)
L3 driver and support for the platform in the bwmon binding.
Link: https://lore.kernel.org/r/20221111032515.3460-1-quic_bjorande@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220924015043.25130-1-shangxiaojing@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The aggregation over votes for all nodes in the provider will always
only find the bandwidth votes for the destination side of the path.
Further more, the average kBps value will always be 0.
Simplify the logic by directly looking at the destination node's peak
bandwidth request.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20221111032515.3460-5-quic_bjorande@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The EPSS instance in e.g. SM8350 and SC8280XP has per-core L3 voting
enabled. In this configuration, the "shared" vote is done using the
REG_L3_VOTE register instead of PERF_STATE.
Rename epss_l3 to clarify that it's affecting the PERF_STATE register
and add a new L3_VOTE description. Given platform lineage it's assumed
that the L3_VOTE-based case will be the predominant one, so use this for
a new generic qcom,epss-l3 compatible.
While adding the EPSS generic, also add qcom,osm-l3.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20221111032515.3460-4-quic_bjorande@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Each platform defines their own OSM L3 descriptor, but in practice
there's only two: one for OSM and one for EPSS. Remove the duplicated
definitions.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20221111032515.3460-3-quic_bjorande@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The identifiers used for nodes needs to be unique in the running system,
but defining them per platform results in a lot of duplicated
definitions and prevents us from using generic compatibles.
As these identifiers are not exposed outside the kernel, change to use
driver-local numbers, picked completely at random.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20221111032515.3460-2-quic_bjorande@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Today remove callbacks of platform devices return an int. This is unfortunate
because the device core ignores the return value and so the platform code only
emits a warning (and still removes the device).
The longterm quest is to make these remove callbacks return void instead.
This series is a preparation for that, with the goal to make the remove
callbacks obviously always return 0. This way when the prototype of
these functions is changed to return void, the change is straight
forward and easy to review.
Link: https://lore.kernel.org/r/20220718121409.171773-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make INTERCONNECT_QCOM tristate so that icc-common.c can be
compiled as a module.
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914064122.16222-1-quic_hyiwei@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The function imx_icc_unregister() returns zero unconditionally. Make it
return void.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch set is to support bucket in icc-rpm driver, so it implements
the similar mechanism in the icc-rpmh driver.
It uses interconnect path tag to indicate the bandwidth voting is for
which buckets, and there have three kinds of buckets: AWC, WAKE and
SLEEP, finally the wake and sleep bucket values are used to set the
corresponding clock (active and sleep clocks). So far, we keep the AWC
bucket but doesn't really use it.
Link: https://lore.kernel.org/r/20220712015929.2789881-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patchset is to support i.MX8MP NoC settings, i.MX8MP NoC initial
value after power up is invalid, need set a valid value after related
power domain up.
This patchset also includes two patch[1,2] during my development to enable
the ICC feature for i.MX8MP.
I not include ddrc DVFS in this patchset, ths patchset is only to
support NoC value mode/priority/ext_control being set to a valid value
that suggested by i.MX Chip Design Team. The value is same as NXP
downstream one inside Arm Trusted Firmware:
https://source.codeaurora.org/external/imx/imx-atf/tree/plat/imx/imx8m/i/gpc.c?h=lf_v2.4#n97
Link: https://lore.kernel.org/r/20220703091132.1412063-1-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Introduce imx_icc_noc_setting structure to describe a master port setting
Pass imx_icc_noc_setting as a parameter from specific driver
Set priority level, mode, ext control in imx_icc_node_set
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-8-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
max_node_id not equal to the ARRAY_SIZE of node array, need increase 1,
otherwise xlate will fail for the last entry. And rename max_node_id
to num_nodes to reflect the reality.
Fixes: f0d8048525 ("interconnect: Add imx core driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-5-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This commit uses buckets for support bandwidth and clock rates. It
introduces a new function qcom_icc_bus_aggregate() to calculate the
aggregate average and peak bandwidths for every bucket, and also it
calculates the maximum value of aggregated average bandwidth across all
buckets.
The maximum aggregated average is used to calculate the final bandwidth
requests. And we can set the clock rate per bucket, we use SLEEP bucket
as default bucket if a platform doesn't enable the interconnect path
tags in DT binding; otherwise, we use WAKE bucket to set active clock
and use SLEEP bucket for other clocks. So far we don't use AMC bucket.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-6-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect rpm driver uses a single aggregate bandwidth to
calculate the clock rates for both active and sleep clocks; therefore,
it has no chance to separate bandwidth requests for these two kinds of
clocks.
This patch studies the implementation from interconnect rpmh driver to
support multiple buckets. The rpmh driver provides three buckets for
AMC, WAKE, and SLEEP; this driver only needs to use WAKE and SLEEP
buckets, but we keep the same way with rpmh driver, this can allow us to
reuse the DT binding and avoid to define duplicated data structures.
This patch introduces two callbacks: qcom_icc_pre_bw_aggregate() is used
to clean up bucket values before aggregate bandwidth requests, and
qcom_icc_bw_aggregate() is to aggregate bandwidth for buckets.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-5-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This commit changes to use callback qcom_icc_xlate_extended(). This
is a preparation for population path tags from the interconnect DT
binding, it doesn't introduce functionality change for the existed DT
binding without path tags.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-4-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
since there have conflict between two headers icc-rpmh.h and icc-rpm.h,
the function qcom_icc_xlate_extended() is declared in icc-rpmh.h thus
it cannot be used by icc-rpm driver.
Move the function to a new common file icc-common.c so that allow it to
be called by multiple drivers.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-3-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make it possible to set destination as well as source bandwidth. If the
*dst pointer is non-NULL. Right now it appears that we never make the
destination bw allocation call, which is inconsistent with the downstream
way of doing this.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220707093823.1691870-1-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It's fashion to use the icc_sync_state callback to notify the framework
when all consumers are probed, so that the bandwidth request doesn't
need to stay on maximum value.
Do the same thing for msm8939 driver.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220416012634.479617-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
This patch set is to address two clock rate setting issues.
The first patch is to fix a potential cached clock rate mismatching
issue, the issue can lead to the clock rate is missed to be set. Note,
since this potential issue requires specific time window and certain
condition (consumers need to request the same bandwidth) to produce,
the patch is based on analysis but not a real trace log.
The second patch is an extension to cache clock rates for active and
sleep clocks separately, with this change it gives us possibility to set
active and sleep clock with different clock rates.
* icc-rpm
interconnect: qcom: icc-rpm: Fix for cached clock rate
interconnect: qcom: icc-rpm: Cache every clock rate
Link: https://lore.kernel.org/r/20220416031029.693211-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The Qualcomm interconnect providers started off defining nodes and BCMs
using the DEFINE_QNODE() and DEFINE_QBCM() macros. Unfortunately this
results in a block of long lines that are hard to read, a transition to
explicitly stated definition has been made for newly introduced
platforms.
Transition the SC8180X interconnect provider driver to this style as
well, to make it easier to read while debugging interconnect related
issues.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503225300.1141814-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-4-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The introduction of the Qualcomm SC8180X provider raced with the
refactoring of the RPMh common code and SC8180X was left with the old
style of duplicating the probe function in each provider driver.
Transition the driver to the "new" design.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-3-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The cached clock rate is used for all bus clocks, thus it has the
assumption that all interconnect clock rates are always same, this
causes trouble if we want to set different clock rates separately.
This patch is to allocate a clock rate array to cache every clock
rate.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220416031029.693211-3-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
All nodes within an interconnect bus share interconnect bus clocks, but
every node has its own cached clock rate values, this can lead to
unexpected clock rate setting.
Let's see an example shown in below, in this case, a bus have two nodes
A and B, and its buswidth is 8:
step1: vote bandwidth 1600M for node(A):
aggregated(bw) = 1600M
qcom_icc_node(A)->rate = 1600M / 8 = 200MHz
step2: vote bandwidth 1600M for node(B):
aggregated(bw) = 1600M + 1600M = 3200M
qcom_icc_node(B)->rate = 3200M / 8 = 400MHz
step3: unvote bandwidth 1600M for node(A)
aggregated(bw) = 3200M - 1600M = 1600M
target_clock = 1600M / 8 = 200MHz
The problem is in step 3, the calculated target clock rate is 200MHz,
which equals to the cached clock rate in node(A) (See step 1),
unfortunately, qcom_icc_set() skips to set the new clock rate 200MHz in
this case, so the bus clock rate will continue to stay at 400MHz.
To resolve the issue, one possible solution is to invoke clk_get_rate()
to retrieve the clock rates on the fly, thus we can totally remove the
cached clock rates. But after review the code, many bus clock has set
the flag CLK_GET_RATE_NOCACHE, this results in the retrieving bus clock
rate is time cost for iterating parent clock nodes, and even challenges
bus clock drivers to provide recalc_rate() callbacks.
So this patch moves the cached rates into structure qcom_icc_provider,
we use it as a central place to maintain bus clock handlers and cached
clock rate, therefore, it can smoothly dismiss the mismatching problem.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220416031029.693211-2-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Ignore compatible strings for the IPA virt drivers that were removed in
commits 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0
interconnects") and 2f3724930e ("interconnect: qcom: sc7180: Drop IP0
interconnects") so that the sync state logic can kick in again.
Otherwise all the interconnects in the system will stay pegged at max
speeds because 'providers_count' is always going to be one larger than
the number of drivers that will ever probe on sc7180 or sdx55. This
fixes suspend on sc7180 and sdx55 devices when you don't have a
devicetree patch to remove the ipa-virt compatible node.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0 interconnects")
Fixes: 2f3724930e ("interconnect: qcom: sc7180: Drop IP0 interconnects")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_bcm are not modified, so they can be made
const for safety. The contents of struct qcom_icc_bcm must stay
non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220427131154.302581-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_node (and similar structures) are not
modified, so they can be made const for safety. The contents of struct
qcom_icc_node must stay non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220427131154.302581-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_bcm are not modified, so they can be made
const for safety. The contents of struct qcom_icc_bcm must stay
non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220412102623.227607-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_node (and similar structures) are not
modified, so they can be made const for safety. The contents of struct
qcom_icc_node must stay non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220412102623.227607-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The Qualcomm SC8280XP provides the means for the OS to request bus
bandwidth using RPMh. It consists of providers for each of the busses in
the SoC and two virtual providers, for the "memory controller" and a few
of "virtual clocks".
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220408214835.624494-2-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Similar to the sc7180 commit, let's drop the IP0 interconnects here
because the IP0 resource is also used in the clk-rpmh driver on sdx55.
It's bad to have the clk framework and interconnect framework control
the same RPMh resource without any coordination. The rpmh driver in the
kernel doesn't aggregate resources between clients either, so leaving
control to clk-rpmh avoids any issues with unused interconnects turning
off IP0 behind the back of the clk framework.
Cc: Alex Elder <elder@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b2150cab9a ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver
in commit bcd63d222b ("clk: qcom: rpmh: Add IPA clock for SC7180") and
modeled as a clk, but this interconnect driver still had it modeled as
an interconnect. This was mostly OK because nobody used the interconnect
definition, until the interconnect framework started dropping bandwidth
requests on interconnects that aren't used via the sync_state callback
in commit 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state"). Once
that patch was applied the IP0 resource was going to be controlled from
two places, the clk framework and the interconnect framework.
Even then, things were probably going to be OK, because commit
b95b668eaa ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in
pre_aggregate") was needed to actually drop bandwidth requests on unused
interconnects, of which the IPA was one of the interconnect that wasn't
getting dropped to zero. Combining the three commits together leads to
bad behavior where the interconnect framework is disabling the IP0
resource because it has no users while the clk framework thinks the IP0
resource is on because the only user, the IPA driver, has turned it on
via clk_prepare_enable(). Depending on when sync_state is called, we can
get into a situation like below:
IPA driver probes
IPA driver gets notified modem started
runtime PM get()
IPA clk enabled -> IP0 resource is ON
sync_state runs
interconnect zeroes out the IP0 resource -> IP0 resource is off
IPA driver tries to access a register and blows up
The crash is an unclocked access that manifest as an SError.
SError Interrupt on CPU0, code 0xbe000011 -- SError
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x4c/0x80
lr : mutex_lock+0x30/0x80
sp : ffffffc00da9b9c0
x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000
x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8
x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00
x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000
x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080
x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28
x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace+0xf4/0x114
show_stack+0x24/0x30
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
panic+0x150/0x38c
nmi_panic+0x88/0xa0
arm64_serror_panic+0x74/0x80
do_serror+0x0/0x80
do_serror+0x58/0x80
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x78/0x7c
mutex_lock+0x4c/0x80
__gsi_channel_start+0x50/0x17c
gsi_channel_start+0x54/0x90
ipa_endpoint_enable_one+0x34/0xc0
ipa_open+0x4c/0x120
Remove all IP0 resource management from the interconnect driver so that
clk-rpmh is the sole owner. This fixes the issue by preventing the
interconnect driver from overwriting the IP0 resource data that the
clk-rpmh driver wrote.
Cc: Alex Elder <elder@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b95b668eaa ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Fixes: bcd63d222b ("clk: qcom: rpmh: Add IPA clock for SC7180")
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Booting msm8939 on tip-of-tree I encountered the following error.
[ 1.212340] qnoc-msm8939 580000.interconnect_mm: can't request region for resource [mem 0x00580000-0x0059407f]
[ 1.212391] qnoc-msm8939 580000.interconnect_mm: Cannot ioremap interconnect bus resource
[ 1.221524] qnoc-msm8939: probe of 580000.interconnect_mm failed with error -16
Initially I thought this was a bug with the interconnect driver but,
examining it a bit more I realized the DTS I was working with based on
downstream, declares snoc and snoc_mm as existing at the same address
range.
When we were developing the DTS for 8939 we weren't using the common rpm
interconnect driver so we never saw the ioremap collision.
Taking a hard look at the qcom documentation as well as the downstream code
we see that yes downstream declares snoc and snoc_mm separately but, also
at the same overlapping address.
The qcom documentation for performance points for msm8936/msm8939 snoc,
deliniates snoc_mm as simply two new performance-points i.e. a faster GPLL0
vote associated with new multi-media devices attached to the snoc.
In other words the snoc had two new RPM vote indices added to it, to
represent the higher performance clocks, should one of the multi-media IP
blocks call for it.
We can fix the ioremap collision and still represent the two higher
performance point clock votes by coalsecing snoc and snoc_mm into snoc. The
DTS clock references will take care of the appropriate votes.
V2:
Made snoc-mm into a child of snoc - Dmitry
Removes redundant msm8939_snoc_mm_regmap_config - bod
Link: https://lore.kernel.org/r/20220129032735.2410936-1-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Booting tip-of-tree on msm8939 we find the following error caused by our
modelling of snoc and snoc_mm as peer devices with the same address space.
[ 1.212340] qnoc-msm8939 580000.interconnect_mm: can't request region for resource [mem 0x00580000-0x0059407f]
[ 1.212391] qnoc-msm8939 580000.interconnect_mm: Cannot ioremap interconnect bus resource
[ 1.221524] qnoc-msm8939: probe of 580000.interconnect_mm failed with error -16
Declaring snoc_mm as a child device of snoc mitigates the fault and is
consistent with a similar extant implementation in qcm2290.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220129032735.2410936-3-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add support for QCM2290 including a few prep changes.
* icc-qcm2290
interconnect: icc-rpm: Define ICC device type
interconnect: icc-rpm: Add QNOC type QoS support
interconnect: icc-rpm: Support child NoC device probe
dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support
interconnect: qcom: Add QCM2290 driver support
Link: https://lore.kernel.org/r/20211215002324.1727-1-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It adds interconnect driver support for QCM2290 platform. The topology
consists of 3 NoCs: BIMC, Config NoC (CNOC) and System NoC (SNOC). SNOC
is a QCOM_ICC_QNOC type device, as well as its 3 virtual child devices,
QUP, MMNRT and MMRT. QUP is owned by RPM and thus has no .regmap_cfg,
while the other 2 share the same .regmap_cfg with SNOC (parent).
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20211215002324.1727-6-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As shown in downstream DT[1], the System NoC of QCM2290 is modelled
using 4 fab/noc devices: sys_noc + qup_virt + mmnrt_virt + mmrt_virt.
Among those 3 virtual devices, qup is owned by RPM and has no regmap
resource, while mmnrt and mmrt are owned by AP and share the same
regmap as sys_noc. So it's logical to represent these virtual devices
as child nodes of sys_noc in DT, so that such configuration can be
supported with a couple of changes on qnoc_probe():
- If there are child nodes, populate them.
- If the device descriptor has .regmap_cfg but there is no IOMEM
resource for the device, use parent's regmap.
[1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/scuba-bus.dtsi
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20211215002324.1727-4-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in SM8450 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
This is based on the downstream driver by
Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211209084842.189627-3-vkoul@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series adds a driver for interconnects on MSM8996. This fixes some rare display underflows
and provides a slight heat reduction.
* icc-msm8996
dt-bindings: interconnect: Combine SDM660 bindings into RPM schema
interconnect: icc-rpm: Add support for bus power domain
dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings
interconnect: qcom: Add MSM8996 interconnect provider driver
Link: https://lore.kernel.org/r/20211021132329.234942-1-y.oudjana@protonmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Using icc-rpm on ARM32 currently results in clk_set_rate() errors during
boot, e.g. "bus clk_set_rate error: -22". This is very similar to commit
7381e27b1e ("interconnect: qcom: msm8974: Prevent integer overflow in rate")
where the u64 is converted to a signed long during clock rate rounding,
resulting in an overflow on 32-bit platforms.
Let's fix it similarly by making sure that the rate does not exceed
LONG_MAX. Such high clock rates will surely result in the maximum
frequency of the bus anyway.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211206114542.45325-1-stephan@gerhold.net
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add a driver for the MSM8996 NoCs. This chip is similar to SDM660 where
some busses are controlled by RPM, while others directly by the AP with
writes to QoS registers.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20211021132329.234942-5-y.oudjana@protonmail.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add support for attaching to a power domain. This is required
for Aggregate 0 NoC on MSM8996, which is powered by a GDSC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20211021132329.234942-3-y.oudjana@protonmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch series merges support for AP-owned and bus QoS from SDM660
into common code (icc-rpm.c). MSM8916 and MSM8939 support code is
extended to support these features. As I was touching these drivers, per
Bjorn's suggestion expand DEFINE_QNODE macros (which makes adding
QoS support much easier to review).
* icc-rpm
interconnect: icc-rpm: move bus clocks handling into qnoc_probe
interconnect: sdm660: expand DEFINE_QNODE macros
interconnect: sdm660: drop default/unused values
interconnect: sdm660: merge common code into icc-rpm
interconnect: icc-rpm: add support for QoS reg offset
interconnect: msm8916: expand DEFINE_QNODE macros
interconnect: msm8916: add support for AP-owned nodes
interconnect: msm8939: expand DEFINE_QNODE macros
interconnect: msm8939: add support for AP-owned nodes
interconnect: qcs404: expand DEFINE_QNODE macros
interconnect: qcom: drop DEFINE_QNODE macro
Link: https://lore.kernel.org/r/20210903232421.1384199-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Drop DEFINE_QNODE macro which has become unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-12-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
To follow the example of the rest of icc-rpm.h drivers, expand
DEFINE_QNODE macros in the driver.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-11-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Port support for AP-owned nodes from the downstream device tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-10-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In preparation to adding AP-owned nodes support to msm8939 expand
DEFINE_QNODE macros in the driver.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-9-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Port support for AP-owned nodes from the downstream device tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-8-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In preparation to adding AP-owned nodes support to msm8916 expand
DEFINE_QNODE macros in the driver.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-7-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SDM660 driver expects to have QoS registers at the beginning of NoC
address space (sdm660 platform shifts NoC base address). Add support for
using QoS register offset, so that other platforms do not have to change
existing device trees.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-6-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Other RPM interconnect drivers might also use QoS support. Move AP-owned
nodes support from SDM660 driver to common icc-rpm.c.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-5-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Expand DEFINE_QNODE macros, which with an addition of QoS become an ugly
beast with tons of different arguments. While we are at it also move
links lists to separate arrays.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
All icc-rpm drivers use the same set of bus clocks. Move handling of bus
clocks to qnoc_probe. This both simplifies the code and allows using
qnoc_probe as device's probe function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.
Framework change:
- Add sanity check to detect if node is already added to provider.
Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJhI7tWAAoJEIDQzArG2BZjRWsQAIPaOLOBYGN7+aGLI0MO4aRx
u5P7i5QD/EJzSQ6z+MtNkzwgDV4+D6EzWxA2eyIPtHQsbpmift+qdWBVHPZcRFkD
sKV+B0NqJZSJe2W/RQ8u66yKaj931nbiSfxvCdpCB/Vamrfip8Bv7IO0hRsmFsSe
ji+UFg7SnCyou1C461visnl7+yGVwDB6e5BS7aXTYJ/3gl5lJ7IGooCwXs6w/EsS
FBBrvBqGU3ez61y6SYKrTQTI9MQEcioIUULXa0z8OGdAIqjfY3lWOIk6bhJTYFj8
snjowrGxMP+K7JzR9KgktB/eCivzYAdyMJKJrd6z1sPUS6vrAOLd0OZdHKVF87si
8s1ed6gUTkEK62Eg1OL1dIL3D6Ivf+UgGolz98hFqr2IxI/WRLGQ5oeuSHefiE8U
Rni13/vCNeM82mYIxk4e5VScM1PWPUdSPJl/40TgKELt7XvxKTPc0FO2u6mc+nRl
vsMJpnnVFszas0I40g0eIspWI4NYnukOFARP+2AXTpVuAylbf4YLkKSiwG1MN5TV
LdralsxcRLvp2ot9IliqmXjam+QJILK7GBpIqWe0jbo6ND4fGcd5ZN48pGmWxot6
mrNMXfq7cUbsG0aWrHIUZ8bISUEBlBBqqTSzKqVT4RtSZ8862lvQEHx5j72sQLj/
EYGoCI2F7tqFzs5P+qqm
=K/bk
-----END PGP SIGNATURE-----
Merge tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.15
Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.
Framework change:
- Add sanity check to detect if node is already added to provider.
Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: osm-l3: Use driver-specific naming
interconnect: qcom: osm-l3: Add sc8180x support
dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding
interconnect: qcom: Add SC8180x providers
dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings
interconnect: Sanity check that node isn't already on list
interconnect: qcom: icc-rpmh: Consolidate probe functions
This reverts commit f84f5b6f72, which is
causing regressions on some platforms, preventing them to boot or do a
clean reboot. This is because the above commit is sending also all the
zero bandwidth requests to turn off any resources that might be enabled
unnecessarily, but currently this may turn off interconnects that are
enabled by default, but with no consumer to keep them on.
Let's revert this for now as some platforms are not ready for such
change yet. In the future we can introduce some _ignore_unused option
that could keep also the unused resources on platforms that have only
partial interconnect support and also add .shutdown callbacks to deal
with disabling the resources in the right order.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/CAE-0n52iVgX0JjjnYi=NDg49xP961p=+W5R2bmO+2xwRceFhfA@mail.gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In situations were the developer screws up by e.g. not giving the OSM
nodes unique identifiers the interconnect framework might mix up nodes
between the OSM L3 provider and e.g. the RPMh provider.
The resulting callstack contains "qcom_icc_set", which is not unique to
the OSM L3 provider driver. Once the faulting qcom_icc_set() is
identified it's further confusing that "qcom_icc_node" is different
between the different drivers.
To avoid this confusion, rename the node struct and the setter in the
OSM L3 driver to include "osm_l3" in their names.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210725031414.3961227-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The SC8180x contains the usual RPMH based interconnect providers, add a
driver which defines the various busses and ports.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210723194243.3675795-2-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The expression sizeof(**ptr) for the void **ptr is just 1 rather than
the size of a pointer. Fix this by using sizeof(*ptr).
Addresses-Coverity: ("Wrong sizeof argument")
Fixes: e145d9a184 ("interconnect: Add devm_of_icc_get() as exported API for users")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210730075408.19945-1-colin.king@canonical.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20210721175432.2119-5-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We currently only enforce BW floors for a subset of nodes in a path.
All BCMs that need updating are queued in the pre_aggregate/aggregate
phase. The first set() commits all queued BCMs and subsequent set()
calls short-circuit without committing anything. Since the floor BW
isn't set in sum_avg/max_peak until set(), then some BCMs are committed
before their associated nodes reflect the floor.
Set the floor as each node is being aggregated. This ensures that all
all relevant floors are set before the BCMs are committed.
Fixes: 266cd33b59 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20210721175432.2119-4-mdtipton@codeaurora.org
[georgi: Removed unused variable]
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The pre_aggregate callback isn't called in all cases before calling
aggregate. Add the missing calls so providers can rely on consistent
framework behavior.
Fixes: d3703b3e25 ("interconnect: Aggregate before setting initial bandwidth")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The initial BW values may be used by providers to enforce floors. Zero
these values after sync-state so that providers know when to stop
enforcing them.
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20210721175432.2119-2-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Broken interconnect providers might add the same node multiple times or
in multiple providers, which causes strange errors as the provider's
node list is later traversed.
Detect that a node already has an associated provider, complain and
reject the addition of the node, to aid the developer.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210625234903.1324755-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current probe/remove functions are implemented separately for each
target, but they are almost identical. Replace them with common
functions that can be used across all rpmh targets.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210621214241.13521-1-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Here are changes for the 5.14-rc1 merge window consisting of interconnect
driver updates.
Driver changes:
- New driver for SC7280 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ihE7
-----END PGP SIGNATURE-----
Merge tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.14
Here are changes for the 5.14-rc1 merge window consisting of interconnect
driver updates.
Driver changes:
- New driver for SC7280 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add SC7280 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings
Add driver for the Qualcomm interconnect buses found in SC7280 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Link: https://lore.kernel.org/r/1619517059-12109-3-git-send-email-okukatla@codeaurora.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
These are the interconnect changes for the 5.13-rc1 merge window
with the highlights being drivers for two new platforms.
Driver changes:
- New driver for SM8350 platforms.
- New driver for SDM660 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SguC
-----END PGP SIGNATURE-----
Merge tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.13
These are the interconnect changes for the 5.13-rc1 merge window
with the highlights being drivers for two new platforms.
Driver changes:
- New driver for SM8350 platforms.
- New driver for SDM660 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm8350: Add missing link between nodes
interconnect: qcom: sm8350: Use the correct ids
interconnect: qcom: sdm660: Fix kerneldoc warning
MAINTAINERS: icc: add interconnect tree
interconnect: qcom: Add SM8350 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings
interconnect: qcom: icc-rpm: record slave RPM id in error log
interconnect: qcom: Add SDM660 interconnect provider driver
dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
This patch series adds the SDM660 interconnect provider driver in
order to stop some timeouts and achieve some decent performance by
avoiding to be NoC limited.
It's also providing some power consumption improvement, but I have
only measured that as less heat, which is quite important when
working on thermally constrained devices like smartphones.
Please note that this driver's yaml binding is referring to a MMCC
clock, so this series does depend on the SDM660 MMCC driver that I
have sent separately.
The multimedia clock is required only for the Multimedia NoC (mnoc).
This patch series has been tested against the following devices:
- Sony Xperia XA2 Ultra (SDM630 Nile Discovery)
- Sony Xperia 10 (SDM630 Ganges Kirin)
- Sony Xperia 10 Plus (SDM636 Ganges Mermaid)
* icc-sdm660
dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
interconnect: qcom: Add SDM660 interconnect provider driver
interconnect: qcom: sdm660: Fix kerneldoc warning
Link: https://lore.kernel.org/r/20201017133718.31327-1-kholk11@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There is a link between the GEM NoC and C NoC nodes, which is currently
missing from the topology. Let's add it to allow consumers request paths
that use this link.
Reported-by: Alex Elder <elder@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210401094435.28937-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
For creating an array with the members for each NoC, we should be using
a local indexes, as otherwise unnecessary large arrays would be created.
Using an incorrect indexes will also result error for the consumers when
they try to find a valid path between the endpoints. Let's fix this and
use the correct ids.
Reported-by: Alex Elder <elder@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210401094334.28871-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in SM8350 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Generated from downstream interconnect driver written by David Dai
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210318094617.951212-3-vkoul@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add slave RPM ID to assist with identifying incorrect RPM config.
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210205015205.22947-2-benl@squareup.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Introduce a driver for the Qualcomm interconnect busses found in
the SDM630/SDM636/SDM660 SoCs.
The topology consists of several NoCs that are controlled by a
remote processor that collects the aggregated bandwidth for each
master-slave pairs.
On a note, these chips are managing the "bus QoS" in a "hybrid"
fashion: some of the paths in the topology are managed through
(and by, of course) the RPM uC, while some others are "AP Owned",
meaning that the AP shall do direct writes to the appropriate
QoS registers for the specific paths and ports, instead of sending
an indication to the RPM and leaving the job to that one.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20201017133718.31327-3-kholk11@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When krealloc() fails and new is NULL, no error return code of
icc_link_destroy() is assigned.
To fix this bug, ret is assigned with -ENOMEM hen new is NULL.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.
See commit c497f9322a ("interconnect: qcom: msm8916: Remove rpm-ids
from non-RPM nodes") where this was done for msm8916.
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210205015205.22947-3-benl@squareup.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in SDX55 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Based on SM8250 driver and generated from downstream dts.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121053254.8355-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in MSM8939 based
platforms. The topology consists of four NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-6-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Use shared code for aggregate functionalities and probe function
to remove duplicated code.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-3-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add RPM based interconnect driver implements the set and aggregate
functionalities that translates bandwidth requests into RPM messages.
These modules provide a common set of functionalities for all
Qualcomm RPM based interconnect providers and should help reduce code
duplication when adding new providers.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-2-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add the icc_sync_state callback to notify the framework when consumers
are probed and the bandwidth doesn't have to be kept at maximum anymore.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Suggested-by: Georgi Djakov <georgi.djakov@linaro.org>
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201210100906.18205-6-martin.kepplinger@puri.sm
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When CONFIG_COMPILE_TEST is set, it is possible to build some
of the interconnect drivers into the kernel while their dependencies
are loadable modules, which is bad:
arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit':
(.text+0x1f8): undefined reference to `rpmh_invalidate'
arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init':
(.text+0x2ac): undefined reference to `cmd_db_read_addr'
arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data'
The exact dependencies are a bit complicated, so split them out into a
hidden Kconfig symbol that all drivers can in turn depend on to get it
right.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
For SM8250 the recently introduced support for handling boot-loader
stream mappings in the ARM SMMU allow us to enable this, and thereby USB
controller and PHY, SDHCI controller and FastRPC, as well as support for
the SM8250 HDK board has been added. Additionally PRNG and RTC is
enabled.
Similarly for SM8150, the ARM SMMU could be added which allows the
secondary USB controller and PHYs, as well as WiFi to be added and
support for the SM8150 HDK board to be introduced. Additionally
Coresight and support for the last-level cache controller was added.
MSM8916 finally has VDDCX and VDDMX removed as regulators and are now
handled by the rpmpd driver for the devices controlling them. The
Longsheer L8150 gains touchscreen, sensors, vibrator and LED support.
MSM8992 gains USB and SDHCI support as well as an I2C controller and the
associated RMI4 based touchscreen for the Lumia 950.
MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm
support. Then support for the Lumia 950 XL is added.
SDM845 gains interconnect properties for a number of devices and the
GENI wrappers gains iommu stream configuration, which means DMA
operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the
SMMU enabled, a few fixes and the description of the eDP bridge and
panel means that the laptop can now boot mainline with working display,
GPU, WiFi and audio.
SC7180 gains a slew of smaller improvements and fixes.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl/FP0cbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FINAP/11hbDNRXJ+3oqLk53aD
/8G0Xbyzy9gekpYURZwJJrjaGY7l1psM39Kbo+flUPusFfxRBNmbWrw57PPbzjyS
d3RnPXuc/XDkOvCHtQstowtdKBl5EIXU6ec9xg4RY5bZUiD5Fpk8OLBAitvruEqy
6YCgMhy5yRspb8iBXA5N4ERU0EsQBOMIIoP6DRuGkeMkUhk/QllO+xwAr6ugI3Ot
s3gua4tjWfi5kxT0bXklU4fk7Xeiuy6VL+giddd4dWVUm2GdO7jRlU6ae6CLoi2k
PStZJcca8uOpTMpF4ZqMLNX51UAk+VZsCvjMm5pYIQAWCp15sWyMA20wi8vM+cjx
HHhsXU7WAqQfLzMntgUd36CJaTuGw8J+QzQyNpQeHjbL6tAA15BfnIIQ+RUZWgsx
XoPWdSvmUBhyo9g2cR7yXRXQGxvMRy/w7uHgv6Szb9KkDxeBnpYMjBMrbaZAsyMA
YoYvhdIO9HkL2IbUxQgiszQsD58aDvauEY+KpOZclVW5ODPhJmsSTZK2aH/L6kj9
6hn0rOBrXy8rZE5Vs08C5D2WvqZ0Ib45vXNpb9uucvyXXNZMywGw+94B3YMNbkCz
/C9C1DJcRX1NZjJnQco3Cn0Ni7AmRzD5aAHi3n2BhxbsxOxZ6v0SjEDbce+lXwYJ
5l4AcPSLDjGXFJsbUPQrHvJF
=lkn4
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.11
For SM8250 the recently introduced support for handling boot-loader
stream mappings in the ARM SMMU allow us to enable this, and thereby USB
controller and PHY, SDHCI controller and FastRPC, as well as support for
the SM8250 HDK board has been added. Additionally PRNG and RTC is
enabled.
Similarly for SM8150, the ARM SMMU could be added which allows the
secondary USB controller and PHYs, as well as WiFi to be added and
support for the SM8150 HDK board to be introduced. Additionally
Coresight and support for the last-level cache controller was added.
MSM8916 finally has VDDCX and VDDMX removed as regulators and are now
handled by the rpmpd driver for the devices controlling them. The
Longsheer L8150 gains touchscreen, sensors, vibrator and LED support.
MSM8992 gains USB and SDHCI support as well as an I2C controller and the
associated RMI4 based touchscreen for the Lumia 950.
MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm
support. Then support for the Lumia 950 XL is added.
SDM845 gains interconnect properties for a number of devices and the
GENI wrappers gains iommu stream configuration, which means DMA
operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the
SMMU enabled, a few fixes and the description of the eDP bridge and
panel means that the laptop can now boot mainline with working display,
GPU, WiFi and audio.
SC7180 gains a slew of smaller improvements and fixes.
* tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits)
arm64: dts: qcom: c630: Define eDP bridge and panel
arm64: dts: qcom: c630: Fix pinctrl pins properties
arm64: dts: qcom: c630: Polish i2c-hid devices
arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver
arm64: dts: sdm845: Add interconnect properties for QUP
interconnect: qcom: sdm845: Add the missing nodes for QUP
dt-bindings: interconnect: sdm845: Add IDs for the QUP ports
arm64: dts: qcom: c630: Expose LID events
arm64: dts: qcom: c630: Re-enable apps_smmu
dts: qcom: sdm845: Add dt entries to support crypto engine.
arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD
arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts
arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts
arm64: dts: qcom: sc7180: limit IPA iommu streams
arm64: dts: qcom: sm8150: Add Coresight support
arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub
arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant
arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite
arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor
arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor
...
Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of new driver and a cleanup.
Driver changes:
- New driver for Samsung Exynos SoCs
- Misc cleanups
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=a7If
-----END PGP SIGNATURE-----
Merge tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.11
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of new driver and a cleanup.
Driver changes:
- New driver for Samsung Exynos SoCs
- Misc cleanups
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
MAINTAINERS: Add entry for Samsung interconnect drivers
interconnect: Add generic interconnect driver for Exynos SoCs
interconnect: qcom: Simplify the vcd compare function
The QUP nodes are currently defined just as entries in the topology,
but they are not referenced by any of the NoCs. Let's fix this and
"attach" them to their NoCs, so that the QUP drivers are able to use
them as path endpoints and scale their bandwidth.
This is based on the information from the downstream msm-4.9 kernel.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds a generic interconnect driver for Exynos SoCs in order
to provide interconnect functionality for each "samsung,exynos-bus"
compatible device.
The SoC topology is a graph (or more specifically, a tree) and its
edges are described by specifying in the 'interconnects' property
the interconnect consumer path for each interconnect provider DT node.
Each bus is now an interconnect provider and an interconnect node as
well (cf. Documentation/interconnect/interconnect.rst), i.e. every bus
registers itself as a node. Node IDs are not hard coded but rather
assigned dynamically at runtime. This approach allows for using this
driver with various Exynos SoCs.
Frequencies requested via the interconnect API for a given node are
propagated to devfreq using dev_pm_qos_update_request(). Please note
that it is not an error when CONFIG_INTERCONNECT is 'n', in which
case all interconnect API functions are no-op.
The samsung,data-clk-ratio DT property is used to specify the ratio
of the interconect bandwidth to the minimum data clock frequency
for each bus.
Due to unspecified relative probing order, -EPROBE_DEFER may be
propagated to ensure that the parent is probed before its children.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20201112140931.31139-3-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Let's simplify the cmp_vcd() function and replace the conditionals
with just a single statement, which also improves readability.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20201013171923.7351-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
of_count_icc_providers() function uses for_each_available_child_of_node()
helper to recursively check all the available nodes. This helper already
properly handles child nodes' reference count, so there is no need to do
it explicitly. Remove the excessive call to of_node_put(). This fixes
memory trashing when CONFIG_OF_DYNAMIC is enabled (for example
arm/multi_v7_defconfig).
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201119103746.32564-1-m.szyprowski@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The following errors are noticed during boot on a QCS404 board:
[ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6
[ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6
These errors show when we try to configure the GPU and display nodes.
Since these particular nodes aren't supported on RPM and are purely
local, we should just change their mas_rpm_id to -1 to avoid any
requests being sent for these master IDs.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
It has been reported that on Fairphone 2 (msm8974-based), increasing
the clock rate for some of the NoCs during boot may lead to hangs.
Let's restore the original behavior and not touch the clock rate of
any of the NoCs to fix the regression.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When sync_state support got introduced recently, by default we try to
set the NoCs to run initially at maximum rate. But as these values are
aggregated, we may end with a really big clock rate value, which is
then converted from "u64" to "long" during the clock rate rounding.
But on 32bit platforms this may result an overflow. Fix it by making
sure that the rate is within range.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
In addition to the rest of Qcom interconnect drivers use icc_sync_state
for SM8150/SM8250 interconnect drivers to notify the interconnect
framework when all consumers are probed and there is no need to keep the
bandwidth set to maximum anymore.
Also move the BCM initialization before creating the nodes to set the
max bandwidth in hardware for the initialization/probing stage.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Take into account the initial bandwidth from the framework and update
the internal sum and max values before committing if needed. This will
ensure that the floor bandwidth values are enforced until the providers
get into sync state.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Tested-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently if we use sync_state, by default the bandwidth is maxed out,
but in order to set this in hardware, the BCMs (Bus Clock Managers) need
to be initialized first. Move the BCM initialization before creating the
nodes to fix this.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-3-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently if we use sync_state, by default the bandwidth is maxed out,
but in order to set this in hardware, the BCMs (Bus Clock Managers) need
to be initialized first. Move the BCM initialization before creating the
nodes to fix this.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-2-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When setting the initial bandwidth, make sure to call the aggregate()
function (if such is implemented for the current provider), to handle
cases when data needs to be aggregated first.
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
After enabling interconnect scaling for display on the db845c board,
in certain configurations the board hangs, while the following errors
are observed on the console:
Error sending AMC RPMH requests (-110)
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
...
In this specific case, the above is related to one of the sequencers
being stuck, while client drivers are returning from probe and trying
to disable the currently unused clock and interconnect resources.
Generally we want to keep the multimedia NoC enabled like the rest of
the NoCs, so let's set the keepalive flag on it too.
Fixes: aae57773fb ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200902172433.1138-2-krzk@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* icc-syncstate:
interconnect: Add get_bw() callback
interconnect: Add sync state support
interconnect: qcom: Use icc_sync_state
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Lowering the bandwidth on the bus might have negative consequences if
it's done before all consumers had a chance to cast their vote. Now by
default the framework sets the bandwidth to maximum during boot. We need
to use the icc_sync_state callback to notify the framework when all
consumers are probed and there is no need to keep the bandwidth set to
maximum anymore.
Link: https://lore.kernel.org/r/20200825170152.6434-4-georgi.djakov@linaro.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The bootloaders often do some initial configuration of the interconnects
in the system and we want to keep this configuration until all consumers
have probed and expressed their bandwidth needs. This is because we don't
want to change the configuration by starting to disable unused paths until
every user had a chance to request the amount of bandwidth it needs.
To accomplish this we will implement an interconnect specific sync_state
callback which will synchronize (aggregate and set) the current bandwidth
settings when all consumers have been probed.
Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
These structures aren't modified at runtime. Mark them const so they get
moved to read-only memory. We have to cast away const in one place when
we store into the data member of struct icc_node. This is paired with a
re-const of the data member when it is extracted in qcom_icc_set().
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200914182112.513981-1-swboyd@chromium.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
