Fix cppcheck warning:
[sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c:764]: (style)
Variable 'ret' is assigned a value that is never used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning
[sound/soc/intel/boards/kbl_da7219_max98927.c:179]: (style) Variable
'ret' is assigned a value that is never used.
[sound/soc/intel/boards/kbl_da7219_max98927.c:1098]: (style) Variable
'i' is assigned a value that is never used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
[sound/soc/intel/boards/kbl_da7219_max98927.c:340] ->
[sound/soc/intel/boards/kbl_da7219_max98927.c:348]: (style) Variable
'ret' is reassigned a value before the old one has been used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix GCC warning with W=1
sound/soc/intel/boards/glk_rt5682_max98357a.c:256:48: warning:
‘constraints_channels’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix GCC warning with W=1, previous cleanup did not remove unnecessary
variable.
sound/soc/sof/intel/hda-dai.c: In function ‘hda_link_pcm_prepare’:
sound/soc/sof/intel/hda-dai.c:265:31: warning: variable ‘hda_stream’
set but not used [-Wunused-but-set-variable]
265 | struct sof_intel_hda_stream *hda_stream;
| ^~~~~~~~~~
Fixes: a3ebccb52e ("ASoC: SOF: Intel: hda: reset link DMA state in prepare")
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113205620.27285-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixup this error
CC sound/soc/codecs/rt715-sdw.o
linux/sound/soc/codecs/rt715-sdw.c: In function 'rt715_dev_resume':
linux/sound/soc/codecs/rt715-sdw.c:568:28: error: implicit declaration\
of function 'to_sdw_slave_device'; did you mean 'sdw_slave_modalias'?\
[-Werror=implicit-function-declaration]
struct sdw_slave *slave = to_sdw_slave_device(dev);
^~~~~~~~~~~~~~~~~~~
sdw_slave_modalias
linux/sound/soc/codecs/rt715-sdw.c:568:28: warning: initialization of\
'struct sdw_slave *' from 'int' makes pointer from integer without a\
cast [-Wint-conversion]
cc1: some warnings being treated as errors
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h80yhm9p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was
checking for there to be at least one altsetting but then went on to
access the second one, which may not exist.
This could lead to random slab data being used to initialise the sync
endpoint in snd_usb_add_endpoint().
Fixes: c75a8a7ae5 ("ALSA: snd-usb: add support for implicit feedback")
Fixes: ca10a7ebdf ("ALSA: usb-audio: FT C400 sync playback EP to capture EP")
Fixes: 5e35dc0338 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204")
Fixes: 17f08b0d9a ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II")
Fixes: 103e962564 ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk")
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200114083953.1106-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
make W=1 reports the following warnings, fix as suggested
sound/pci/hda/patch_hdmi.c: In function ‘hdmi_non_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:824:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
824 | ;
| ^
sound/pci/hda/patch_hdmi.c:826:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
826 | ;
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211405.28070-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make W=1 throws a lot of warnings, with multiple misalignments between
function params and their descriptions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113205638.27338-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the initial amplifier driver for rt1308-sdw.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200110014606.17333-1-shumingf@realtek.com
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If CONFIG_SND_ATMEL_SOC_DMA=m, build error:
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'
Function atmel_pcm_dma_platform_register is defined under
CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in
CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200113133242.144550-1-chenzhou10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason, attempting to route audio through QDSP6 on MSM8916
causes the RX interpolation path to get "stuck" after playing audio
a few times. In this situation, the analog codec part is still working,
but the RX path in the digital codec stops working, so you only hear
the analog parts powering up. After a reboot everything works again.
So far I was not able to reproduce the problem when using lpass-cpu.
The downstream kernel driver avoids this by resetting the RX
interpolation path after use. In mainline we do something similar
for the TX decimator (LPASS_CDC_CLK_TX_RESET_B1_CTL), but the
interpolator reset (LPASS_CDC_CLK_RX_RESET_CTL) got lost when the
msm8916-wcd driver was split into analog and digital.
Fix this problem by adding the reset to
msm8916_wcd_digital_enable_interpolator().
Fixes: 150db8c5af ("ASoC: codecs: Add msm8916-wcd digital codec")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200105102753.83108-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
MIC BIAS Internal1 is broken at the moment because we always
enable the internal rbias resistor to the TX2 line (connected to
the headset microphone), rather than enabling the resistor connected
to TX1.
Move the RBIAS code to pm8916_wcd_analog_enable_micbias_int1/2()
to fix this.
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200111164006.43074-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
MIC BIAS External1 sets pm8916_wcd_analog_enable_micbias_ext1()
as event handler, which ends up in pm8916_wcd_analog_enable_micbias_ext().
But pm8916_wcd_analog_enable_micbias_ext() only handles the POST_PMU
event, which is not specified in the event flags for MIC BIAS External1.
This means that the code in the event handler is never actually run.
Set SND_SOC_DAPM_POST_PMU as the only event for the handler to fix this.
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200111164006.43074-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case system has multiple HDA codecs, and codec probe fails for
at least one but not all codecs, driver will end up cancelling
a non-initialized timer context upon driver removal.
Call trace of typical case:
[ 60.593646] WARNING: CPU: 1 PID: 1147 at kernel/workqueue.c:3032
__flush_work+0x18b/0x1a0
[...]
[ 60.593670] __cancel_work_timer+0x11f/0x1a0
[ 60.593673] hdac_hda_dev_remove+0x25/0x30 [snd_soc_hdac_hda]
[ 60.593674] device_release_driver_internal+0xe0/0x1c0
[ 60.593675] bus_remove_device+0xd6/0x140
[ 60.593677] device_del+0x175/0x3e0
[ 60.593679] ? widget_tree_free.isra.7+0x90/0xb0 [snd_hda_core]
[ 60.593680] snd_hdac_device_unregister+0x34/0x50 [snd_hda_core]
[ 60.593682] snd_hdac_ext_bus_device_remove+0x2a/0x60 [snd_hda_ext_core]
[ 60.593684] hda_dsp_remove+0x26/0x100 [snd_sof_intel_hda_common]
[ 60.593686] snd_sof_device_remove+0x84/0xa0 [snd_sof]
[ 60.593687] sof_pci_remove+0x10/0x30 [snd_sof_pci]
[ 60.593689] pci_device_remove+0x36/0xb0
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case system has multiple HDA controllers, it can happen that
same HDA codec driver is used for codecs of multiple controllers.
In this case, SOF may fail to probe the HDA driver and SOF
initialization fails.
SOF HDA code currently relies that a call to request_module() will
also run device matching logic to attach driver to the codec instance.
However if driver for another HDA controller was already loaded and it
already loaded the HDA codec driver, this breaks current logic in SOF.
In this case the request_module() SOF does becomes a no-op and HDA
Codec driver is not attached to the codec instance sitting on the HDA
bus SOF is controlling. Typical scenario would be a system with both
external and internal GPUs, with driver of the external GPU loaded
first.
Fix this by adding similar logic as is used in legacy HDA driver
where an explicit device_attach() call is done after request_module().
Also add logic to propagate errors reported by device_attach() back
to caller. This also works in the case where drivers are not built
as modules.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We will reinit DSP in a loop when it fails to initialize the first
time, as recommended. So, it is not an error before we finally give
up. And reorder the trace to make it more readable.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT711 is in SoundWire mode on link0.
RT1308 is either on SSP2 or on SoundWire link1 (depending on hardware
reworks).
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board
RT700 using link1.
For now we only have definitions for CML. CNL and CFL are just
placeholders.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board RT700
using link0.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Any app using ALSA OSS emulation on top of SOF will fail
to error from OSS SNDCTL_DSP_SETFMT ioctl. Reported initially
as an issue with xournalpp (application using PortAudio with
an OSS backend), but applies more generally to other apps
using OSS as well.
Problem is caused by SOF PCM not supporting repeated calls
to hw_params(), without matching calls to pcm_free(). This
is however exactly what the ALSA OSS PCM code is doing when
it is handling the OSS ioctls.
The problem will lead to leaking of DSP resources and eventual
failure of DSP PCM_PARAMS IPC.
BugLink: https://github.com/thesofproject/linux/issues/1510
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The legacy driver uses dummy cpu_dai and platform, SOF requires actual
values to bind.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing machine driver depends on SPI Master capabilities, but
the Kconfig does not model this dependency and the SPI controller
needs to be selected as well.
Without this patch the machine driver probe would fail with the
spi-RT5677AA:00 component never registered by the ACPI/LPSS subsystem.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a857e073ff ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") removed
the last use of the rtd variable but didn't remove its definition,
leading to the following warning/error for MIPS rbtx49xx_defconfig
builds:
sound/soc/txx9/txx9aclc.c: In function 'txx9aclc_pcm_hw_params':
sound/soc/txx9/txx9aclc.c:54:30: error: unused variable 'rtd'
[-Werror=unused-variable]
struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
^~~
Resolve this by removing the unused variable.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: a857e073ff ("ASoC: txx9: txx9aclc: remove snd_pcm_ops")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200109191422.334516-1-paulburton@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.
snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.
Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200112102358.18085-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA dice driver expects devices to multiplex MIDI messages into first
port of isochronous communication. Actually devices perform for it.
However, check of stream format is invalid for second port of isochronous
communication. As a result, when the device supports two ports for
isochronous communication and the stream format is hard-coded, ALSA
dice driver fails to start packet streaming.
This commit loosens stream format check for MIDI conformant data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At failure of attempt to detect protocol extension, ALSA dice driver
should be fallback to limited functionality. However it's not.
This commit fixes it.
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: 58579c056c ("ALSA: dice: use extended protocol to detect available stream formats")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1d uses Oxford Semiconductor FW 971 ASIC (FW971) for
communication. Although the unit is bound to ALSA oxfw driver, the instance
of sound card can not be added due to its quirk of plug information. This
bug was added when snd-scs1x is merged into snd-oxfw at commit
9e2004f9ce ("ALSA: oxfw: obsolete scs1x module").
This commit fixes the driver for the quirk. In cases that the unit returns
NOT IMPLEMENTED for some AV/C commands, the sound card is added without any
PCM/MIDI interfaces for packet streaming. For SCS.1d, model dependent
operation adds MIDI interface and applications can use it to operate
according to HSS1394 protocol from reverse-engineering work by Sean M.
Pappalardo.
Plug Control Register (PCR) has information that the unit has a pair of
plugs for isochronous communication:
(oMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000900
result: 80ff0001
(iMPR)
$ ./firewire-request /dev/fw1 read 0xfffff0000980
result: 80ff0001
AV/C PLUG INFO also returns information that the unit has a pair of
plugs for isochronous communication.
(AV/C PLUG INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff0200ffffffff
response: 000: 0c ff 02 00 01 01 02 02
However, AV/C PLUG SIGNAL INFO command is rejected for both plugs.
(AV/C OUTPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1800ffffffff
response: 000: 0a ff 18 00 ff ff ff ff
(AV/C INPUT PLUG SIGNAL INFO command)
$ ./firewire-request /dev/fw1 fcp 0x01ff1900ffffffff
response: 000: 0a ff 19 00 ff ff ff ff
Furthermore, AV/C EXTENDED STREAM FORMAT INFO is not implemented.
(AV/C EXTENDED STREAM FORMAT INFO list subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc000000000ffff00ff
response: 000: 08 ff bf c0 00 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO list subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc001000000ffff00ff
response: 000: 08 ff bf c0 01 00 00 00 ff ff 00 ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for input plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc100000000ffffffff
response: 000: 08 ff bf c1 00 00 00 00 ff ff ff ff
(AV/C EXTENDED STREAM FORMAT INFO single subfunction for output plug)
$ ./firewire-request /dev/fw1 fcp 0x01ffbfc101000000ffffffff
response: 000: 08 ff bf c1 01 00 00 00 ff ff ff ff
Reference: https://mailman.alsa-project.org/pipermail/alsa-devel/2012-May/052264.html
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1d doesn't support packet streaming even if it has plugs for
isochronous communication.
This commit is a preparation for this case. The 'has_input' member is
added to specific structure, and MIDI/PCM interfaces are not added when
the member is false.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When AV/C command returns 'NOT IMPLEMENTED' status in its response, ALSA
oxfw driver uses ENOSYS as error code. However, it's expected just to be
used for missing system call number.
This commit replaces it with ENXIO.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113073418.24622-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA firewire-tascam driver can bring corruption due to spin lock without
restoration of IRQ flag in SoftIRQ context. This commit fixes the bug.
Cc: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org> # v4.21
Fixes: d716742243 ("ALSA: firewire-tascam: queue events for change of control surface")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113085719.26788-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC reports the following warning with W=1
sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’:
sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning
of declaration [-Wold-style-declaration]
1694 | const static usb_mixer_elem_resume_func_t resume_funcs[] = {
| ^~~~~
Move static to the beginning of declaration
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC reports a warning with W=1:
sound/core/timer.c: In function ‘snd_timer_user_read’:
sound/core/timer.c:2219:19: warning: initialized field overwritten
[-Woverride-init]
2219 | .tstamp_sec = tread->tstamp_nsec,
| ^~~~~
sound/core/timer.c:2219:19: note: (near initialization for
‘(anonymous).tstamp_sec’)
Assigning nsec values to sec fields is problematic in general, even
more so when the initial goal was to survive the 2030 timer
armageddon.
Fix by using the proper field in the initialization
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 07094ae6f9 ("ALSA: Avoid using timespec for struct snd_timer_tread")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200111203325.20498-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got quite a few bug reports showing the SOF driver being loaded
unintentionally recently, and the reason seems to be that users didn't
know the module option change: with the recent kernel, a new option
dsp_driver=1 has to be passed to a new module snd-intel-dspcfg
instead of snd_hda_intel.dmic_detect=0 option.
That is, actually there are two tricky things here:
- We changed the whole detection in another module and another
option semantics.
- The existing option for skipping the DSP probe was also renamed.
For avoiding the confusion and giving user more hint, this patch
reverts the renamed option dsp_driver back to dmic_detect for
snd-hda-intel module, and show the warning about the module option
change when the non-default value is passed.
Fixes: 82d9d54a6c ("ALSA: hda: add Intel DSP configuration / probe code")
Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few piled ASoC fixes and usual HD-audio and USB-audio fixups.
Some of them are for ASoC core, but rather about error-handling.
-----BEGIN PGP SIGNATURE-----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=/0Br
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some
of them are for ASoC core error-handling"
* tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: enable regmap internal locking
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
ALSA: hda/realtek - Set EAPD control to default for ALC222
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
ALSA: hda/realtek - Add new codec supported for ALCS1200A
ASoC: Intel: boards: Fix compile-testing RT1011/RT5682
ASoC: SOF: imx8: Fix dsp_box offset
ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()
ASoC: fsl_audmix: add missed pm_runtime_disable
ASoC: stm32: spdifrx: fix input pin state management
ASoC: stm32: spdifrx: fix race condition in irq handler
ASoC: stm32: spdifrx: fix inconsistent lock state
ASoC: core: Fix access to uninitialized list heads
ASoC: soc-core: Set dpcm_playback / dpcm_capture
ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev
ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free
ASoC: SOF: fix fault at driver unload after failed probe
dpcm_fe_dai_shutdown() / soc_compr_free_fe() didn't care pmdown_time.
We already have snd_soc_dapm_stream_stop() for it.
Let's use common method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhewrq9j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we stop stream, if it was Playback, we might need to care
about power down time. In such case, we need to use delayed work.
We have same implementation for it at soc-pcm.c and soc-compress.c,
but we don't want to have duplicate code.
This patch adds snd_soc_dapm_stream_stop(), and share same code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rs8t4uw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to setup rtd->close_delayed_work_func.
It will be set at snd_soc_dai_compress_new() or soc_new_pcm().
But these setups close_delayed_work() which is same name /
same implemantaion, but different local code.
To reduce duplicate code, this patch moves it as
snd_soc_close_delayed_work() and share same code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736cot4v2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC need to care pinctrl_pm_select_xxx().
It is called at soc-core and soc-pcm.
soc-pcm is controlling it for activate DAI.
soc-core is controlling it for whole system
(= suspend/resume/probe/poweroff).
If we focus to soc-core side, it need to care about BIAS level.
Then, snd_soc_suspend() only is controlling it by Component base (a).
Other functions are DAI base (b).
(a) pinctrl_pm_select_xxx(component->dev, xxx);
(b) pinctrl_pm_select_xxx(dai->dev, xxx);
Because of these unbalance, the code is confusable.
Here, dai->dev and component->dev are same pointer.
Thus, we can replace it component base.
One note here is that it cared DAI (= CPU/Codec) pin before this patch,
after this patch, it cares Component (= CPU/Codec/Platform) pin.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874kx4t4v6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_suspend() are doing below for pinctrl_pm_select_sleep_state()
int snd_soc_suspend(struct device *dev)
{
...
for_each_card_components(card, component) {
...
(1) pinctrl_pm_select_sleep_state(component->dev);
}
for_each_card_rtds(card, rtd) {
...
(2) pinctrl_pm_select_sleep_state(cpu_dai->dev);
}
}
(1) is called for all component (CPU/Codec/Platform), and
(2) is called for CPU DAIs.
Here, component->dev is same as dai->dev.
This means, it is called in duplicate on CPU case.
This patch removes (2).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zhkt4vc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card dai_link has .ignore_suspend, and ALSA SoC cares it when suspend.
For example, like this
for_each_card_rtds(card, rtd) {
if (rtd->dai_link->ignore_suspend)
continue;
...
}
But in snd_soc_suspend(), it doesn't care about
it when suspending Component. This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e20t4vh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't have snd_soc_rtdcom_list anymore.
Let's rename snd_soc_rtdcom_add() to more understandable
snd_soc_rtd_add_component()
Reported-by: Sridharan, Ranjani <ranjani.sridharan@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878smgt4vp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt700.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110014552.17252-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is using struct snd_soc_rtdcom_list to
connecting component to rtd by using list_head.
struct snd_soc_rtdcom_list {
struct snd_soc_component *component;
struct list_head list; /* rtd::component_list */
};
struct snd_soc_pcm_runtime {
...
struct list_head component_list; /* list of connected components */
...
};
The CPU/Codec/Platform component which will be connected to rtd (a)
is indicated via dai_link at snd_soc_add_pcm_runtime()
int snd_soc_add_pcm_runtime(...)
{
...
/* Find CPU from registered CPUs */
rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus);
...
(a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component);
...
/* Find CODEC from registered CODECs */
(b) for_each_link_codecs(dai_link, i, codec) {
rtd->codec_dais[i] = snd_soc_find_dai(codec);
...
(a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component);
}
...
/* Find PLATFORM from registered PLATFORMs */
(b) for_each_link_platforms(dai_link, i, platform) {
for_each_component(component) {
...
(a) snd_soc_rtdcom_add(rtd, component);
}
}
}
It shows, it is possible to know how many components will be
connected to rtd by using
dai_link->num_cpus
dai_link->num_codecs
dai_link->num_platforms
If so, we can use component pointer array instead of list_head,
in such case, code can be more simple.
This patch removes struct snd_soc_rtdcom_list that is only
of temporary value, and convert to pointer array.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes.
However, samples are copied as 16 bits words from iio buffer.
Divide by two the transfer size, to copy the right number of samples.
Fixes: 1e7f6e1c69 ("ASoC: stm32: dfsdm: add 16 bits audio record support")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200110131131.3191-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 4e93c1294f (ASoC: max98090: fix incorrect
helper in max98090_dapm_put_enum_double()) which was misapplied.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt711.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191227054445.27223-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier is primarily interfaced with SoundWire.
One WSA is used for mono speaker configuration and second one
would give stereo setup.
This patch is tested on SDM845 based DragonBoard DB845c and
Lenovo YOGA C630 Laptop based on SDM850 with WSA8815
speaker amplifiers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200107135929.3267-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In current driver, locks can be taken as follows:
- Register access: take a lock on regmap config and then on clock.
- Master clock provider: take a lock on clock and then on regmap config.
This can lead to the circular locking summarized below.
Remove peripheral clock management through regmap framework, and manage
peripheral clock in driver instead. On register access, lock on clock
is taken first, which allows to avoid possible locking issue.
[ 6696.561513] ======================================================
[ 6696.567670] WARNING: possible circular locking dependency detected
[ 6696.573842] 4.19.49 #866 Not tainted
[ 6696.577397] ------------------------------------------------------
[ 6696.583566] pulseaudio/6439 is trying to acquire lock:
[ 6696.588697] 87b0a25b (enable_lock){..-.}, at: clk_enable_lock+0x64/0x128
[ 6696.595377]
[ 6696.595377] but task is already holding lock:
[ 6696.601197] d858f825 (stm32_sai_sub:1342:(sai->regmap_config)->lock){....}
...
[ 6696.812513] Possible unsafe locking scenario:
[ 6696.812513]
[ 6696.818418] CPU0 CPU1
[ 6696.822935] ---- ----
[ 6696.827451] lock(stm32_sai_sub:1342:(sai->regmap_config)->lock);
[ 6696.833618] lock(enable_lock);
[ 6696.839350] lock(stm32_sai_sub:1342:
(sai->regmap_config)->lock);
[ 6696.848035] lock(enable_lock);
Fixes: 03e78a242a ("ASoC: stm32: sai: add h7 support")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200109083254.478-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling many controls by
adding a custom put function to them. That new custom put function
properly handles relations between codec's hardware registers. However
they used card->dapm_mutex to properly serialize those operations. This
in turn triggers a lockdep warning about possible circular dependency.
Fix this by introducing a separate mutex only for serializing the SHDN
hardware register related operations.
This fixes the following lockdep warning observed on Exynos4412-based
Odroid U3 board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc5-next-20200107 #166 Not tainted
------------------------------------------------------
alsactl/1104 is trying to acquire lock:
ed0d50f4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock:
edb4b49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&card->controls_rwsem){++++}:
snd_ctl_add_replace+0x3c/0x84
dapm_create_or_share_kcontrol+0x24c/0x2e0
snd_soc_dapm_new_widgets+0x308/0x594
snd_soc_bind_card+0x80c/0xad4
devm_snd_soc_register_card+0x34/0x6c
odroid_audio_probe+0x288/0x34c
platform_drv_probe+0x6c/0xa4
really_probe+0x200/0x490
driver_probe_device+0x78/0x1f8
bus_for_each_drv+0x74/0xb8
__device_attach+0xd4/0x16c
bus_probe_device+0x88/0x90
deferred_probe_work_func+0x3c/0xd0
process_one_work+0x22c/0x7c4
worker_thread+0x44/0x524
kthread+0x130/0x164
ret_from_fork+0x14/0x20
0x0
-> #0 (&card->dapm_mutex){+.+.}:
lock_acquire+0xe8/0x270
__mutex_lock+0x9c/0xb18
mutex_lock_nested+0x1c/0x24
max98090_shdn_save+0x1c/0x28
max98090_put_enum_double+0x20/0x40
snd_ctl_ioctl+0x190/0xbb8
ksys_ioctl+0x470/0xaf8
ret_fast_syscall+0x0/0x28
0xbefaa564
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
*** DEADLOCK ***
1 lock held by alsactl/1104:
#0: edb4b49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
stack backtrace:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
(unwind_backtrace) from [<c010e180>] (show_stack+0x10/0x14)
(show_stack) from [<c0b2a09c>] (dump_stack+0xb4/0xe0)
(dump_stack) from [<c018a1c0>] (check_noncircular+0x1ec/0x208)
(check_noncircular) from [<c018c5dc>] (__lock_acquire+0x1210/0x25ec)
(__lock_acquire) from [<c018e2d8>] (lock_acquire+0xe8/0x270)
(lock_acquire) from [<c0b49678>] (__mutex_lock+0x9c/0xb18)
(__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
(mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
(max98090_shdn_save) from [<c083a5b8>] (max98090_put_enum_double+0x20/0x40)
(max98090_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
(snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
(ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200108115007.31095-2-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: c9fe7db6e8 ("ASoC: amd: Refactoring of DAI from DMA driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200108035954.51317-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/pci/echoaudio/echoaudio.c: In function snd_echo_mixer_info:
sound/pci/echoaudio/echoaudio.c:1233:20: warning: variable chip set but not used [-Wunused-but-set-variable]
sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vmixer_info':
sound/pci/echoaudio/echoaudio.c:1300:20: warning: variable 'chip' set but not used [-Wunused-but-set-variable]
commit e67c3f0fd4 ("ALSA: pci: echoaudio: remove usage
of dimen menber of elem_value structure") left behind this
unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200108125803.45584-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup
applied for X1 Carbon 7th gen in commit d2cd795c4e ("ALSA: hda -
fixup for the bass speaker on Lenovo Carbon X1 7th gen").
Signed-off-by: Kailang Yang <kailang@realtek.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set EAPD control to verb control.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver produces warnings without CONFIG_OF, and makes
no sense without it either:
sound/soc/codecs/gtm601.c:50:34: error: 'bm818_dai' defined but not used [-Werror=unused-variable]
static struct snd_soc_dai_driver bm818_dai = {
^~~~~~~~~
sound/soc/codecs/gtm601.c:32:34: error: 'gtm601_dai' defined but not used [-Werror=unused-variable]
static struct snd_soc_dai_driver gtm601_dai = {
^~~~~~~~~~
Remove the #ifdef check to avoid the warning.
Fixes: 057a317a8d ("ASoC: gtm601: add Broadmobi bm818 sound profile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107214846.1284981-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently have no trace referring to the firmware path, add a trace
to help debug cases where the wrong file might be used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200107160840.1524-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since ApolloLake, Intel platforms require signed firmware. On all
Windows platforms the default is to require the Intel production key
be used. But some platforms allow for a community key to be used,
which allows developers to compile/build their own firmware.
In the linux-firmware tree, the default intel/sof path is used for
firmwares signed for the production key, and files signed with the
community key are located in intel/sof/community.
Since we don't have an API to query which key is used on what
platforms, we have to rely on DMI-based quirks.
Developers can bypass this mechanism by setting a kernel 'fw_path'
module parameter. Additional dynamic debug traces are provided to help
debug cases where the wrong file might be used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200107160840.1524-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an ASoC driver with pcm_destruct component ops is freed before
the PCM object instantiation (e.g. deferring the probe), it hits an
Oops at snd_soc_pcm_component_free() that calls the pcm_destruct ops
unconditionally.
Fix it by adding a NULL-check of rtd->pcm before calling callbacks.
Fixes: c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Reported-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Ben Ho <ben.ho@mediatek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200107070956.15807-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Some members of the Google_Hatch family include a rt5682 jack codec, but
no speaker amplifier. This uses the same driver (sof_rt5682) as a
combination of rt5682 jack codec and max98357a speaker amplifier. Within
the sof_rt5682 driver, these cases are not currently distinguishable,
relying on a DMI quirk to decide the configuration. This causes an
incorrect configuration when only the rt5682 is present on a
Google_Hatch device.
For CML, the jack codec is used as the primary key when matching,
with a possible speaker amplifier described in quirk_data. The two cases
of interest are the second and third 10EC5682 entries in
snd_soc_acpi_intel_cml_machines[]. The second entry matches the
combination of rt5682 and max98357a, resulting in the quirk_data field
in the snd_soc_acpi_mach being non-null, pointing at
max98357a_spk_codecs, the snd_soc_acpi_codecs for the matched speaker
amplifier. The third entry matches just the rt5682, resulting in a null
quirk_data.
The sof_rt5682 driver's DMI data matching identifies that a speaker
amplifier is present for all Google_Hatch family devices. Detect cases
where there is no speaker amplifier by checking for a null quirk_data in
the snd_soc_acpi_mach and remove the speaker amplifier bit in that case.
Signed-off-by: Sam McNally <sammc@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200103124921.v3.1.Ib87c4a7fbb3fc818ea12198e291b87dc2d5bc8c2@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
When a quirk for the Irbis NB41 netbook was added, to override the defaults
for this device, I forgot to add/keep the BYT_CHT_ES8316_SSP0 part of the
defaults, completely breaking audio on this netbook.
This commit adds the BYT_CHT_ES8316_SSP0 flag to the Irbis NB41 netbook
quirk, making audio work again.
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Fixes: aa2ba991c4 ("ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook")
Reported-and-tested-by: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200106113903.279394-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5640->jack is NULL if jack is already disabled at the time of
driver's module unloading.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More fixes that have been collected, nothing super remarkable here - the
few core fixes are mainly error handling related as are many of the
driver fixes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4TL10THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OCZB/9X2QIslZRGJi4gM1jLmcvPy64FLqUE
iRE0Gi3MVG7r2i7HIgnTu2NHD/Ozpzs89droA0KpXC/uf/JaI8HRXY+tnHP4Qo1F
126h0T0JoDoZDr7IwHY5O+8Zgzqiaq3+JpUB9IBGrHw2DvBx1LCjBR6RRc7vFYM2
mA7HZ260GslhcUwGD+YYBglsABUkP60/MyWb/frxqugclNkUXP9GbnDEBGbVaZCC
hZqus4BBHEGGiTNyL6kb2D6lvxF2e0OH7FpAi55g9lWkN6uzUNph8/o9HBLkNsTI
XEGFRJzJGdwelEbrd+kA7QCCVt3IqxsulpsVndhbn4oSgav5xJeC1VsY
=d133
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.5-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.5
More fixes that have been collected, nothing super remarkable here - the
few core fixes are mainly error handling related as are many of the
driver fixes.
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
A long-standing compile warning was seen during build test:
sound/sh/aica.c: In function 'load_aica_firmware':
sound/sh/aica.c:521:25: warning: passing argument 2 of 'spu_memload' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Fixes: 198de43d75 ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Link: https://lore.kernel.org/r/20200105144823.29547-69-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the static resource tables, the mc size tables
and the string arrays.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-51-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static resource tables,
the volume table, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-50-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for the
resources, controls, registers, values and parameters.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-46-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for
formats, parameters, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the DAIO tables and the
register offset table.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for
registers and verbs, and the string arrays.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for
registers and op codes, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the string array, the
static tables for clock selectors, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for
sample rates, parameters and registers.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the string arrays and the
static tables for volumes.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the board parameters and
DSP command table, and the string arrays.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the string array and the
parameter tables and callers.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the MIDI data definitions,
the static tables for volume parameters, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the string arrays, the
channel map tables and callers.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for rate,
volume, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the EEPROM tables, the
static string arrays, the init verb tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining possible places: the static tables
for init verbs and registers, the string arrays, the conversion
tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static register tables,
the coef tables, the string arrays, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the rate table, the
controller tables, and the key tables.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining places: the static table for the
unit information, the mixer maps, the validator tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to each possible place: the static tables for
registers and bits, the quirk tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining possible places: the string
tables, the rate tables, the verb tables, the index tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to more places: the static tables for PCM
definitions, the register tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to every possible place: the static tables for DSP
commands, the string tables, and register/offset tables.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining sequencer code: the static tables
for MIDI macros, RPN/NRPN, and some strings.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to more possible places: the string tables for PCM
format and co, the table for the PCM type helpers, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to every possible place: mostly for declaring the
dummy hardware models.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix at every place where appropriate: the static
register tables, the volume tables and the callback tables.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For consistency reason, make all hex numbers with lower alphabets for
USB ID entries. It improves grep-ability and reduces careless
mistakes.
Link: https://lore.kernel.org/r/20200105081900.21870-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell E7xx laptops have also mic mute LED that is driven by the
dell-laptop platform driver. Bind it with the capture control as
already done for other models.
A caveat is that the fixup hook for the mic mute LED has to be applied
at last, otherwise it results in the invalid override of the callback.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205529
Link: https://lore.kernel.org/r/20200105081119.21396-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove unused variables that are left over after the conversion of new
PCM ops:
sound/sh/sh_dac_audio.c:166:26: warning: unused variable 'runtime'
sound/sh/sh_dac_audio.c:186:26: warning: unused variable 'runtime'
sound/sh/sh_dac_audio.c:205:26: warning: unused variable 'runtime'
Fixes: 1cc2f8ba0b ("ALSA: sh: Convert to the new PCM ops")
Link: https://lore.kernel.org/r/20200104110057.13875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nothing to worry at this stage but all nice small changes:
- A regression fix for AMD GPU detection in HD-audio
- A long-standing sleep-in-atomic fix for an ice1724 device
- Usual suspects, the device-specific quirks for HD- and USB-audio
-----BEGIN PGP SIGNATURE-----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=mm0Z
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing to worry at this stage but all nice small changes:
- A regression fix for AMD GPU detection in HD-audio
- A long-standing sleep-in-atomic fix for an ice1724 device
- Usual suspects, the device-specific quirks for HD- and USB-audio"
* tag 'sound-5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC
ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker
ALSA: hda - Apply sync-write workaround to old Intel platforms, too
ALSA: hda/hdmi - fix atpx_present when CLASS is not VGA
ALSA: usb-audio: fix set_format altsetting sanity check
ALSA: hda/realtek - Add headset Mic no shutup for ALC283
ALSA: usb-audio: set the interface format after resume on Dell WD19
The snd_pci_quirk tables are referred as read-only, hence they can be
declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-59-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_pci_quirk tables are referred as read-only, hence they can be
declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-58-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_fm801_tea575x_gpios table is referred as read-only, hence it
can be declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-57-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_es1968_tea575x_gpios table is referred as read-only, hence it
can be declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-56-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_emu_chip_details definitions are referred as read-only, hence
they can be declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-55-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_bt87x_boards array is referred as read-only, hence it can be
declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-54-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_seq_oss_callback items are just copied to another struct
as-is, hence they can be declared as const.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-53-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quirk entries used in us122l and usx2y drivers can be declared as
const as they are read-only.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-52-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_ratden definitions used in line6 drivers are all read-only, so
they can be marked as const.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-51-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tables defined in wm8766.c and wm8776.c are referred as read-only,
hence they can be declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-50-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_ice1712_card_info objects are referred only as read-only.
Let's make them const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-49-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_ca0106_details table entries are referred only as read-only.
Let's make them const.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-48-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One snd_ac97_res_table definition remains forgotten without const.
Let's add it for a bit of optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-46-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_opl3_drum_voice items are all read-only, hence they can be
declared as const.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-45-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_pcm_ops items defined in snd-dummy driver can be gracefully
declared as const. Let's mark them for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-44-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-43-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-42-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-40-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-39-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-36-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
Constify snd_kcontrol_new items
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_vx_hardware and snd_vx_ops are only referred without
modification, hence they can be constified gracefully for further
optimizations.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change the argument of snd_midi_process_event() to receive a const
snd_midi_op pointer and its callers respectively. This allows further
optimizations.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The reference to snd_info_entry_ops is rather read-only, so declare it
as a const pointer. This allows a bit more optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now snd_ac97_bus() takes the const ops pointer, so we can define the
snd_ac97_bus_ops locally as const as well for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now snd_ac97_bus() takes the const ops pointer, so we can define the
snd_ac97_bus_ops locally as const as well for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
