Get rid of duplicated macro definitions, as these macros are defined
earlier in the file. Also, get rid of unused member
of 'struct xdma_desc'.
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Link: https://lore.kernel.org/r/20231218113943.9099-2-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver is capable of starting scatter-gather transfers and needs to
wait until their end. It is also capable of starting cyclic transfers
and will only be "reset" next time the channel will be reused. In
practice most of the time we hear no audio glitch because the sound card
stops the flow on its side so the DMA transfers are just
discarded. There are however some cases (when playing a bit with a
number of frames and with a discontinuous sound file) when the sound
card seems to be slightly too slow at stopping the flow, leading to a
glitch that can be heard.
In all cases, we need to earn better control of the DMA engine and
adding proper ->device_terminate_all() and ->device_synchronize()
callbacks feels totally relevant. With these two callbacks, no glitch
can be heard anymore.
Fixes: cd8c732ce1 ("dmaengine: xilinx: xdma: Support cyclic transfers")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20231130111315.729430-5-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver internal scatter-gather logic is:
* set busy to true
* start transfer
<irq>
* set busy to false
* trigger next transfer if any
* set busy to true
</irq>
Setting busy to false in cyclic transfers does not make any sense and is
conceptually wrong. In order to ease the integration of additional
callbacks let's move this change to the scatter-gather path.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-4-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We support both modes, but they perform totally different taks in the
interrupt handler. Clarify what shall be done in each case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Xilinx DMA engine is capable of keeping track of the number of elapsed
periods and this is an increasing 32-bit counter which is only reset
when turning off the engine. No need to add this value to our local
counter.
Fixes: cd8c732ce1 ("dmaengine: xilinx: xdma: Support cyclic transfers")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231130111315.729430-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Task may be rescheduled within dma_free_coherent(). So dma_free_coherent()
can't be called between spin_lock() and spin_unlock() to avoid Call Trace:
Call Trace:
<TASK>
dump_stack_lvl+0x37/0x50
__might_resched+0x16a/0x1c0
vunmap+0x2c/0x70
__iommu_dma_free+0x96/0x100
idxd_device_evl_free+0xd5/0x100 [idxd]
device_release_driver_internal+0x197/0x200
unbind_store+0xa1/0xb0
kernfs_fop_write_iter+0x120/0x1c0
vfs_write+0x2d3/0x400
ksys_write+0x63/0xe0
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Move it out of the context.
Fixes: 244da66cda ("dmaengine: idxd: setup event log configuration")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20231212022158.358619-2-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add PSIL thread information and enable UDMA support for AM62P
and J722S SoC. J722S SoC family is a superset of AM62P, thus
common PSIL thread ID map is reused for both devices.
For those interested, more details about the SoC can be found
in the Technical Reference Manual here:
AM62P - https://www.ti.com/lit/pdf/spruj83
J722S - https://www.ti.com/lit/zip/sprujb3
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213081318.26203-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
__dma_async_device_channel_register() can fail. In case of failure,
chan->local is freed (with free_percpu()), and chan->local is nullified.
When dma_async_device_unregister() is called (because of managed API or
intentionally by DMA controller driver), channels are unconditionally
unregistered, leading to this NULL pointer:
[ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
[...]
[ 1.484499] Call trace:
[ 1.486930] device_del+0x40/0x394
[ 1.490314] device_unregister+0x20/0x7c
[ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0
Look at dma_async_device_register() function error path, channel device
unregistration is done only if chan->local is not NULL.
Then add the same condition at the beginning of
__dma_async_device_channel_unregister() function, to avoid NULL pointer
issue whatever the API used to reach this function.
Fixes: d2fb0a0438 ("dmaengine: break out channel registration")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231213160452.2598073-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the code to use the common dt-binding header file, fsl-edma.h.
Renaming ARGS* to FSL_EDMA*, ensuring no functional changes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231114154824.3617255-4-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce a common dt-bindings header file, fsl-edma.h, shared between
the driver and dts files. This addition aims to eliminate hardcoded values
in dts files, promoting maintainability and consistency.
DTS header file not support BIT() macro yet. Directly use 2^n number.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231114154824.3617255-3-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The eDMAv4 channel mux has a limitation where certain requests must use
even channels, while others must use odd numbers.
Add two flags (ARGS_EVEN_CH and ARGS_ODD_CH) to reflect this limitation.
The device tree source (dts) files need to be updated accordingly.
This issue was identified by the following commit:
commit a725990557 ("arm64: dts: imx93: Fix the dmas entries order")
Reverting channel orders triggered this problem.
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231114154824.3617255-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For cyclic transfers, chain the last descriptor to the first one, and
disable IRQ generation if there is no callback registered with the
cyclic transfer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-6-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of notifying userspace in the end-of-transfer (EOT) interrupt
and program the hardware in the start-of-transfer (SOT) interrupt, we
can do both things in the EOT, allowing us to mask the SOT, and halve
the number of interrupts sent by the HDL core.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-5-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement support for scatter-gather transfers. Build a chain of
hardware descriptors, each one corresponding to a segment of the
transfer, and linked to the next one. The hardware will transfer the
chain and only fire interrupts when the whole chain has been
transferred.
Support for scatter-gather is automatically enabled when the driver
detects that the hardware supports it, by writing then reading the
AXI_DMAC_REG_SG_ADDRESS register. If not available, the driver will fall
back to standard DMA transfers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-4-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Change where and how the DMA transfers meta-data is stored, to prepare
for the upcoming introduction of scatter-gather support.
Allocate hardware descriptors in the format that the HDL core will be
expecting them when the scatter-gather feature is enabled, and use these
fields to store the data that was previously stored in the axi_dmac_sg
structure.
Note that the 'x_len' and 'y_len' fields now contain the transfer length
minus one, since that's what the hardware will expect in these fields.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-3-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use a for() loop instead of a while() loop in axi_dmac_fill_linear_sg().
This makes the code leaner and cleaner overall, and does not introduce
any functional change.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231215131313.23840-2-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Loongson LS2X APB DMA controller is available on Loongson-2K chips.
It is a single-channel, configurable DMA controller IP core based on the
AXI bus, whose main function is to integrate DMA functionality on a chip
dedicated to carrying data between memory and peripherals in APB bus
(e.g. nand).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/8df2a0199434fba3535831082966c2442ecf1cae.1702365725.git.zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. Sothis change allows one more device.
MINORMASK is ((1U << MINORBITS) - 1), so allowing MINORMASK as a maximum value
makes sense. It is also consistent with other "ida_.*MINORMASK" and
"ida_*MINOR()" usages.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/ac991f5f42112fa782a881d391d447529cbc4a23.1702967302.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Source and destination data buffers are allocated with GPF_KERNEL flag.
It means that, if the DDR is more than 2GB, buffers can be allocated above
the 32-bit addressable space. In this case, and if the dma controller is
only 32-bit compatible, swiotlb bounce buffer, located in the 32-bit
addressable space, is used and introduces a memcpy.
To prevent this extra memcpy, due to swiotlb bounce buffer use because
source or destination data buffer is allocated above the 32-bit addressable
space, force source and destination data buffers allocation with GPF_DMA
instead, when nobounce parameter is true.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20231124160235.2459326-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To support the flexibility to reserve the specific dma channels
add the support of dma-channel-mask property in the tegra210-adma
driver
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20231128071615.31447-3-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Sifive platform dma (sf-pdma) has both in-order and out-of-order
configurations but sf-pdam driver configured to do in-order DMA
transfers, with out-of-order configuration got better throughput
in the PolarFire SoC platform.
Add a PolarFire SoC specific compatible and code to support
for out-of-order dma transfers
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-4-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new compatible name microchip,mpfs-pdma to support
out of order dma transfers
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-3-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update sf-pdma driver to adopt generic DMA device tree bindings.
It calls of_dma_controller_register() with of_dma_xlate_by_chan_id
to get the generic DMA device tree helper support and the DMA
clients can look up the sf-pdma controller using standard APIs.
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-2-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The compatibles "ti,omap-sdma" and "ti,dra7-dma-crossbar" aren't documented
by a schema which causes warnings:
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
As no one has cared to fix them, just drop them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122235050.2966280-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and
macOS preserves the upper bits when setting the configuration in the
lower ones. If we reset the upper bits to 0, this causes framing errors
on suspend/resume (the data stream "tears" and channels get swapped
around). Keeping the upper bits untouched, like the macOS driver does,
fixes this issue.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
There is an error path that has the above mentioned problem. This patch
only adds a more drastic error message. To properly fix it,
dmaengine_terminate_sync() must be known to have succeeded (or that it's
safe to not call it as other drivers seem to assume).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231105093415.3704633-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMAC block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-dmac" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
No driver changes are required as generic compatible string
"renesas,rz-dmac" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231102203922.548353-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qualcomm X1E80100 uses GPI DMA for its GENI interface. Add a compatible
string for it in the documentation by using the SM6350 as fallback.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124100608.29964-4-quic_sibis@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for introducing more register regions, add description
for existing register regions so that its easier to map reg-names to
that of SoC Documentations/TRMs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Include upper 5 address bits of physical address in iitlbp
- Prevent booting 64-bit kernels on PA1.x machines
- parport-gsc: mark init function static
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVB1AgAKCRD3ErUQojoP
Xy+GAP0TlgE7ExHBB4jBpGf6uFuP0broznCeclPD4Bd0gngVhQEAz5v5m0FkJVVI
5nOlKbBzLU4Mt9WYEbqNhmoNrklvYQo=
=T1IA
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
1, Support PREEMPT_DYNAMIC with static keys;
2, Relax memory ordering for atomic operations;
3, Support BPF CPU v4 instructions for LoongArch;
4, Some build and runtime warning fixes.
-----BEGIN PGP SIGNATURE-----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=bmFe
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
- Finish a refactor of pgprot_framebuffer() which dependend on some changes
that were merged via the drm tree.
- Fix some kernel-doc warnings to quieten the bots.
Thanks to: Nathan Lynch, Thomas Zimmermann.
-----BEGIN PGP SIGNATURE-----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=Qaeg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
-----BEGIN PGP SIGNATURE-----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=xjGh
-----END PGP SIGNATURE-----
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are
the same prototypes in asm/kprobes.h for some architectures, but
some of them are missing the prototype and it causes a warning.
So move the prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return
but if $retval exists, it will be converted to %return silently.
This finds that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters
of __kprobe_event_gen_cmd_start() to be consistent with the
argument list of the function.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVOwAQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bItMH/0F/vyiirgLrRVvQ+5Tr
Hm32oc1BQzxnQ0+9bjzk3r90KYk5cysBEEqxKzgxq9/RsJdyCczQUpxYehU0BoZT
1B4pB5eQ0DwcdGAVk4TyBRYVBb3uhCyyZNXv+F60AsO8i87fHHoJXT9SoKK+Vgx4
MAklE1gnxFFlRoYCBQpks89NajRx6n3aEL4/oXO3WYSrv+H2WGtZamB+RhpufkDx
Qx5TkIGnjulcW6J5m7Px5N3z9AX00SbfooZHAae3fqsek5RPNecfc1/WiANNXrSm
SYsG/i1jcHVvmk2YmCVokVLPKzhCOsKIuiW91rBu/Tu6lqiJmC+fxWxuZqAdXFUi
+kw=
=uymB
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in omapfb,
amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZU6s8AAKCRD3ErUQojoP
X1bVAQCzMS+ZEuKKUGKeoUKvQjHe6wWPopgnnWlzbGLunTSdFAEApDLjXOT9QYez
iHbEDcLNfwhGURIu0qOQDQ6NEe9ayQE=
=0D+E
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- big pile of amd fixes, but mostly hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
-----BEGIN PGP SIGNATURE-----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=l45e
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
Jan Kuliga