drm/i915 adds some extra cflags, namely -Wall, which causes instances of
-Wformat-security to appear when building with clang, even though this
warning is turned off kernel-wide in the main Makefile:
drivers/gpu/drm/i915/gt/intel_gt.c:983:2: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
GEM_TRACE("ERROR\n");
^~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/i915/i915_gem.h:76:24: note: expanded from macro 'GEM_TRACE'
#define GEM_TRACE(...) trace_printk(__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:369:3: note: expanded from macro 'trace_printk'
do_trace_printk(fmt, ##__VA_ARGS__); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:383:30: note: expanded from macro 'do_trace_printk'
__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
^~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_gt.c:983:2: note: treat the string as an argument to avoid this
This does not happen with GCC because it does not enable
-Wformat-security with -Wall. Disable -Wformat-security within the i915
Makefile so that these warnings do not show up with clang.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214195821.29809-1-ztong0001@gmail.com
As the excessive #includes from i915_drv.h were axed, kvmgt.c build
started failing. Add the necessary #include where needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 14da21cc46 ("drm/i915: axe lots of unnecessary includes from i915_drv.h")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215122030.2741656-1-jani.nikula@intel.com
Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.
For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):
* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000
v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.
Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
A few of our MCH registers are defined with absolute register offsets.
For consistency, let's switch their definitions to be relative offsets
from MCHBAR_MIRROR_BASE.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-1-matthew.d.roper@intel.com
The random order of register definitions we have today causes a lot of
confusion and unintentional duplication when new registers/bits are
added to the driver. Let's order the GT register file by MMIO offset
A couple duplicated/unused register definitions are dropped while doing
this re-order: GEN11_GT_INTR_DW{0,1}, GEN11_IIR_REG{0,1}_SELECTOR, and
GEN11_INTR_IDENTITY_REG{0,1} aren't used anywhere in the driver because
we have other parameterized macros referencing those registers.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-7-matthew.d.roper@intel.com
There's a lot of inconsistent spacing and indentation in our register
definitions. Let's clean things up a bit and follow some consistent
rules:
* "#define" always starts in column 0
* There's exactly one space between '#define' and the name of a
register.
* There's exactly three spaces between '#define' and the name of a
bit/bitfield.
* Tabs (no spaces) are used between a definition name and its value;
the value starts on column 48 unless the name is too long, in which
case a single tab is used.
Final diff for this patch is empty if whitespace is ignored:
$ git diff -w
$
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-5-matthew.d.roper@intel.com
These SFC registers were defined in an unusual way, taking an engine as
a parameter rather than an engine MMIO base offset. Let's adjust them
to match the style used by other per-engine registers and move them to
intel_engine_regs.h.
While doing this move, we can drop GEN12_HCP_SFC_FORCED_LOCK completely;
it was intended for use in an early version of a hardware workaround,
but was no longer necessary by the time the workaround was finalized.
It is not used anywhere in the driver.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-3-matthew.d.roper@intel.com
Due to some mistaken merge conflict resolution, we wound up with a copy
of VDBOX_CGCTL3F18 in both intel_engine_regs.h and intel_gt_regs.h.
Since this is a per-engine register, referenced relative to an engine's
base offset, drop the copy from intel_gt_regs.h
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-2-matthew.d.roper@intel.com
intel_sagv_{pre,post}_plane_update() can accidentally forget
to bail out early on pre-icl and proceed down the icl+ codepath
at the end of the function. Fortunately it'll bail out before
it gets too far due to old_qgv_mask==new_qgv_mask==0 so no real
bug here. But lets make the code less confusing anyway.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
adlp+ adds some extra bits to the QGV point mask. The code attempts
to handle that but forgot to actually make sure we can store those
bits in the bw state. Fix it.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb767 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Use the {active,scaled}_planes bitmasks from the crtc state
rather than poking at the plane state directly. One step
towards eliminating the last use of the somewhat questionble
intel_atomic_crtc_state_for_each_plane_state() macro which
peeks into the plane state without actually holding the plane
mutex.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Exfiltrate intel_plane_atomic_calc_changes() and its friends from
intel_display.c to intel_atomic_plane.c since that is a much better
fit.
While at it also nuke the official looking kernel docs for
intel_wm_need_update() and flag it for eventual destruction so
that people don't get any wrong ideas about using it in new code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Often using pipes is more convenient than crtc indices.
Convert the current for_each_intel_crtc_mask() to take a
pipe mask instead of a crtc index mask, and rename it to
for_each_intel_crtc_in_pipe_mask() to make it clear what
it does.
The current users of for_each_intel_crtc_mask() don't really
care which kind of mask we use, but for other uses a pipe
mask if better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Current DMC_DEBUG3(_MMIO(0x101090)) address is for TGL,
it is wrong for DG1. Just like commit 5bcc95ca38
("drm/i915/dg1: Update DMC_DEBUG register"), correct
this issue for DG1 platform to avoid wrong register
being read.
BSpec: 49788
v2: fix "not wrong" typo. (Jani)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211002933.84240-1-chuansheng.liu@intel.com
It's fairly difficult to ensure these are actually not needed due to
indirect includes via other files. However, it's easier to add them back
as needed and, most importantly, where needed instead of exhaustively
proving they're unnecessary.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc2bbcd46b66e44e98e1ef76980dfabcfac700d5.1644507885.git.jani.nikula@intel.com
Include drm_fourcc.h, drm_plane.h, and drm_color_mgmt.h where needed, so
we can drop the includes for drm_atomic.h and drm_fourcc.h from
i915_drv.h, reducing the build dependencies.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b03711b2286396b2e9d5822f6adef4e7a6dc0f7b.1644507885.git.jani.nikula@intel.com
Currently the bigjoiner state copy logic is kind of
a byzantine mess.
Clean it up to operate in the following manner during a full
modeset:
1) master uapi -> hw state copy
2) master hw -> slave hw state copy
And during a non-modeset update we do:
1) master uapi -> hw state light copy
2) master hw -> slave hw state light copy
I think that is now easier to reason about since we never do
any kind of master uapi -> slave hw state copy short circuit
that could happen previously.
Obviously this does now depend on the master uapi->hw copy
always happening before the master hw -> slave hw copy, but
that is guaranteed by the fact that we always add both crtcs
to the state early, the crtcs are registered in pipe
order (so the compute_config loop happens in pipe order),
and the hardware requires the master pipe has to be lower
than the slave pipe as well. And for good measure we shall
add a check+WARN for this before doing the bigjoiner crtc
assignment.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072049.1610-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
There's some weird junk in intel_atomic_check_bigjoiner()
that's trying to look at the old crtc state's bigjoiner
usage for some reason. That code is totally unnecessary,
and maybe even actively harmful. Not entirely sure which
since it's such a mess that I can't actually wrap my brain
around what it ends up doing.
Either way, thanks to intel_bigjoiner_add_affected_crtcs()
all of the old bigjoiner crtcs are guaranteed to be in the
state already if any one of them is in the state. Also if
any one of those crtcs got flagged for a modeset, then all
of them will have been flagged, and the bigjoiner links
will have been detached via kill_bigjoiner_slave().
So there is no need to look examing any old bigjoiner
usage in intel_atomic_check_bigjoiner(). All we have to care
about is whether bigjoiner is needed for the new state,
and whether we can get the slave crtc we need.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We seem to be missing a few things from the bigjoiner state copy.
Namely hw.mode isn't getting copied (which probably causes PIPESRC
to be misconfigured), CTM/LUTs aren't getting copied (which could
cause the pipe to produced incorrect output), and we also forgot
to copy over the color_mgmt_changed flag so potentially we fail
to do the actual CTM/LUT programming (assuming we aren't doing
a full modeset or fastset). Fix it all.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072009.1546-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The core doesn't flag scaling_filter prop changes as needing
a modeset. That doesn't work for us since we only reprogram the
pipe scaler during full modesets and fastsets. So we need to
flag the prop change as a modeset ourselves. Assuming nothing else
has changed the operation will get promoted (demoted?) to a fastset
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Just loop over the possible bpc values instead of
using an ugly if construct.
A slight change in behaviour is that we now call
intel_hdmi_{source,sink}_bpc_possible() even for 8bpc,
but that is fine since 8bpc is always supported.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
We are currently computing the relative data rates as
src_size * scale_factor where scale_factor is src_size / dst_size.
Thus relative data rate is src_size * src_size / dst_size,
which is just utter nonsense. What we really seem to want is
just a reasonable estimate on how much data will be fetched
which is just src_size. So let's do that instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118092354.11631-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
commit c50df701d4 ("drm/i915: Enable rpm wakeref tracking
whether runtime pm is enabled or not") enabled wakeref tracking
even for the mock device. Turns out that has somewhat significant
overhead, and on the glacial Core m3's we have in CI the vma
selftests are now exceeding the allotted time budget.
So let's disable the wakeref tracking once again for the mock
device in order to avoid blowing up the selftest runtime.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204171053.18409-1-ville.syrjala@linux.intel.com
