All users updated. If easily=1 require raid-5/-6 to be full.
(is_node_readable): Likewise.
(scan_devices): Scan incomplete but readable LVs at the end.
(grub_diskfilter_memberlist): Pull missing devices.
(insert_array): Skip scanning until device is complete or scan is
done otherwise.
* grub-core/disk/mdraid1x_linux.c (grub_mdraid_detect): Fix wrong
check.
* include/grub/diskfilter.h (grub_diskfilter_lv): New member scanned.
* util/raid.c (grub_util_raid_getmembers): Handle "removed" disks.
(write_section_data): Rename name to shname to avoid shadowing.
(write_symbol_table): Rename name to symname to avoid shadowing.
Fix write_reloc_section call.
* grub-core/Makefile.core.def (xnu): Add file lzss.c
* grub-core/loader/lzss.c: New file.
* grub-core/loader/xnu.c (grub_xnu_load_driver): Close binaryfile
on Mach-O open failure.
* grub-core/loader/macho.c (grub_macho_close): Free uncompressedXX.
Don't free cmdsXX in uncompressedXX is set.
(grub_macho_file): Init new fields.
New argument is_64bit. All users updated.
Handle compressed. Error out if no suitable architecture is found.
Don't close file.
(grub_macho_open): New argument is_64bit. All users updated.
* grub-core/loader/macho32.c: Add defines for new fields.
* grub-core/loader/macho64.c: Likewise.
* grub-core/loader/machoXX.c (grub_macho_contains_macho): Make static.
(grub_macho_parse): Handle compressed.
Defer actual processing if compressed.
(grub_macho_cmds_iterate): Decompress if compressed. New argument
"filename". All users updated.
(grub_macho_size): New argument "filename". All users updated.
(grub_macho_get_entry_point): Likewise.
(grub_macho_load): Handle compressed.
* include/grub/macho.h (grub_macho_lzss_header): New struct.
(GRUB_MACHO_LZSS_OFFSET): New define.
(grub_decompress_lzss): New proto.
* include/grub/machoload.h (grub_macho_file): New fields to handle
compressed.
(grub_macho_contains_macho64): Remove proto.
(grub_macho_contains_macho32): Likewise.
* util/grub.d/30_os-prober.in: Use kernel cache if available.
embed to take a maximum value for nsectors.
* include/grub/emu/hostdisk.h (grub_util_ldm_embed): Likewise.
* include/grub/fs.h (grub_fs): Likewise.
* grub-core/partmap/msdos.c (embed_signatures): New array.
(pc_partition_map_embed): Check for and avoid sectors matching any
of the signatures in embed_signatures, up to max_nsectors.
* grub-core/partmap/gpt.c (gpt_partition_map_embed): Restrict
returned sector map to max_nsectors.
* grub-core/disk/ldm.c (grub_util_ldm_embed): Likewise.
* grub-core/fs/btrfs.c (grub_btrfs_embed): Likewise.
* grub-core/fs/zfs/zfs.c (grub_zfs_embed): Likewise.
* util/grub-setup.c (setup): Allow for the embedding area being
split into multiple blocklists. Tell dest_partmap->embed the
maximum number of sectors we care about.
* util/getroot.c (btrfs_ioctl_dev_info_args) [__linux__]: New struct.
(btrfs_ioctl_fs_info_args) [__linux__]: Likewise.
(BTRFS_IOC_DEV_INFO) [__linux__]: New define.
(BTRFS_IOC_FS_INFO) [__linux__]: Likewise.
(grub_find_root_devices_from_btrfs) [__linux__]: New function.
(grub_find_root_devices_from_mountinfo) [__linux__]: Use
grub_find_root_devices_from_btrfs if on btrfs.
* grub-core/Makefile.am (moddep.lst): Make dependent on video.lst.
* grub-core/Makefile.core.def (all_video): New module.
* grub-core/genmoddep.awk: Generate dependency of all_video from
video.lst.
* grub-core/lib/fake_module.c: New file.
* grub-core/normal/main.c (features): Add feature_all_video_module.
* util/grub.d/00_header.in: Define locale_dir based on $prefix and
don't do explicit search again.
insmod all_video in load_video if available.
* docs/grub.texi (Platform-specific limitations): Fix the columen video
on emu. Mention arc and emu as the only platforms without serial
support.
* grub-core/Makefile.core.def (serial): Enable on all terminfomodule and
ieee1275 platforms.
* grub-core/term/efi/serial.c: New file.
* grub-core/term/ieee1275/serial.c: Likewise.
* grub-core/term/serial.c (grub_serial_find): Disable direct port
specification if no ns8250 driver is available.
(grub_cmd_serial): Likewise.
(GRUB_MOD_INIT) [GRUB_MACHINE_IEEE1275]: Init ofserial.
(GRUB_MOD_INIT) [GRUB_MACHINE_EFI]: Init efiserial.
* include/grub/efi/api.h (GRUB_EFI_SERIAL_IO_GUID): New define.
(grub_efi_parity_type_t): New type.
(grub_efi_stop_bits_t): Likewise.
(grub_efi_serial_io_interface): New struct.
* include/grub/serial.h (grub_serial_port): Make 'broken' field
available for all interfaces.
Add EFI and IEEE1275 fields.
(grub_ofserial_init): New proto.
(grub_efiserial_init): Likeiwse.
* util/grub.d/00_header.in: Don't check for the presence of serial
module.
* grub-core/Makefile.core.def (kernel): Add kern/emu/argp_common.c on
emu.
* util/argp_common.c: Rename to ...
* grub-core/kern/emu/argp_common.c: ... this. All users updated.
Add missing includes.
* grub-core/kern/emu/main.c: Convert to argp.
* po/POTFILES.in: Regenerate.
* util/grub-install.in (usage): Make first letter lowcase in messages
for uniformity.
* util/grub-setup.c (options): Likewise.
path for fonts ($prefix/fonts).
* grub-core/kern/corecmd.c (grub_core_cmd_insmod): Unify condition
for checking if string is a path.
* grub-core/normal/main.c (features): Add feature_default_font_path.
* util/grub-mkconfig.in: Skip mangling of GRUB_FONT into GRUB_FONT_PATH.
* util/grub.d/00_header.in: Use default directory if possible.
* util/grub-install.in: Install unicode.pf2.
[GRUB_UTIL]: New function.
(insert_array) [GRUB_UTIL]: Store partmaps.
* include/grub/diskfilter.h (grub_diskfilter_pv) [GRUB_UTIL]: New member
partmaps.
(grub_diskfilter_print_partmap) [GRUB_UTIL]: New proto.
* util/grub-probe.c (probe_partmap): Call grub_diskfilter_print_partmap.
(probe_abstraction): Print diskfilter and not raid.
Reported by: Lennart Sorensen
(add_pixel): Make static.
(add_font): Likewise.
(write_string_section): Make name and str a const char *.
(write_be16_section): Make name a const char *.
(print_glyphs): Make static.
(write_font_ascii_bitmap): Likewise.
(write_font_width_spec): Likewise.
(write_font_pf2): Likewise.
(argp_parser): Remove unused variable.
Respect format security.
(main): Avoid shadowing. Respect format security.
a const char *.
(read_file): Avoid shadowing.
Reuse underlying error message if device open fails.
(cmd_cmp): Respect format security.
(root): Make const char *.
(fstest): Remove args argument and use global copy.
Respect format security.
(argp_parser): Make static.
(main): Make default_root const char *.
(execute_command): Make first argument a const char *.
(fuse_init): Respect format security.
(argp_parser): Make static. Remove unused variable.
(main): Make default_root a const char *.
Respect format security.
* grub-core/disk/cryptodisk.c (cryptodisk_cleanup): Disable for
now to avoid double free.
* grub-core/kern/emu/hostdisk.c (grub_util_biosdisk_dev): Rename to
hostdisk.
* include/grub/disk.h (grub_disk_dev_id): New id HOSTDISK.
* util/grub-probe.c (escape_of_path): Always return a new copy.
(print_full_name): Escape path.
(probe): Don't call grub_util_devname_to_ofpath on NULL.
Fix hints on abstractions.
* util/ieee1275/ofpath.c (grub_util_info) [STANDALONE]: New function.
(OF_PATH_MAX): Removed.
(MAX_DISK_CAT): New const.
(find_obppath): Use allocated rather than preallocated buffer.
Return result. Argument of_path removed. All users updated.
Add missing fdstat.
(xrealpath): New function.
(block_device_get_sysfs_path_and_link): Remove sysfs argument.
Allocate rather than use preallocated buffer. All users updated.
(__of_path_common): Use allocated rather than preallocatecd buffer.
Return result. Argument of_path removed. All users updated.
(vendor_is_ATA): Read only needed part form the file.
(check_sas): Allocate depending on contents rather than fixed.
(main) [STANDALONE]: Handle NULL result.
* grub-core/boot/i386/pc/lnxboot.S: Scan for multiboot signature
rather than hardcoding the address.
* grub-core/boot/i386/pc/startup_raw.S: Add new data field
no_reed_solomon_length.
Move gate_a20 to no-reed-solomon part.
Don't force a particular size of no reed-solomon part.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART):
Removed.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_LENGTH): New define.
* util/grub-setup.c (setup): Read no_rs_length from the image itself.
compact and more efficient code.
* grub-core/kern/list.c (grub_list_push): Moved from here ...
* include/grub/list.h (grub_list_push): ... to here. Set prev.
(grub_list_remove): Moved from here ...
* include/grub/list.h (grub_list_remove): ... here. Use and set prev.
(grub_prio_list_insert): Set prev.
* include/grub/list.h (grub_list): Add prev. All users updated.
(mountinfo_entry): Increase the field size to take escaping into
account.
(find_root_device_from_libzfs): Add one byte to size of strings for
security.
* util/getroot.c [HAVE_LIMITS_H]: Include `<limits.h>'.
(find_root_device_from_libzfs): Add zpool output parser to be used
as fallback when libzfs isn't available.
* grub-core/boot/mips/startup_raw.S: Use GRUB_DECOMPRESSOR_*
* include/grub/offsets.h: Rename decompressor fields from
GRUB_KERNEL_* to GRUB_DECOMPRESSOR_*.
* util/grub-mkimage.c (image_targets): Use new names.
* grub-core/fs/btrfs.c (grub_btrfs_embed) [GRUB_UTIL]: New function.
(grub_btrfs_fs) [GRUB_UTIL]: Set embed.
* include/grub/fs.h (grub_fs) [GRUB_UTIL]: New field embed.
* util/grub-setup.c (setup): Use fs embedding if available.
Add additional sanity check.
* grub-core/kern/i386/coreboot/init.c (grub_machine_init): Use
_edata and _start.
* grub-core/kern/i386/coreboot/startup.S: Move multiboot header after
the small code. It moves it only by few bytes but simplifies the code.
* grub-core/kern/i386/pc/init.c (grub_machine_init): Use _edata and
_start.
* grub-core/kern/i386/pc/startup.S: Use _edata and _start.
(grub_kernel_image_size): Removed.
* grub-core/kern/i386/qemu/startup.S: Use _edata and _start.
(grub_kernel_image_size): Removed.
[APPLE_CC]: Remove apple compiler support. i386-qemu port can't be
compiled with Apple toolchain.
* grub-core/kern/sparc64/ieee1275/crt0.S: Remove leftover fields.
* include/grub/i386/pc/kernel.h (grub_kernel_image_size): Removed.
* include/grub/i386/qemu/kernel.h (grub_kernel_image_size): Removed.
(grub_total_module_size): Likewise.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_KERNEL_IMAGE_SIZE):
Removed.
(GRUB_KERNEL_I386_PC_COMPRESSED_SIZE): Put it lower.
(GRUB_KERNEL_I386_PC_INSTALL_DOS_PART): Likewise.
(GRUB_KERNEL_I386_PC_INSTALL_BSD_PART): Likewise.
(GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY): Likewise.
(GRUB_KERNEL_I386_QEMU_KERNEL_IMAGE_SIZE): Removed.
(GRUB_KERNEL_SPARC64_IEEE1275_KERNEL_IMAGE_SIZE): Likewise.
(GRUB_KERNEL_SPARC64_IEEE1275_COMPRESSED_SIZE): Likewise.
* include/grub/sparc64/ieee1275/kernel.h (grub_kernel_image_size):
Removed.
(grub_total_module_size): Removed.
* util/grub-mkimage.c (image_target_desc): Remove image_size.
(image_targets): Likewise.
Set .compressed_size to no field on sparc.
(generate_image): Remove kernel_image_size handling.
LVM support for FreeBSD and GNU/kFreeBSD.
* util/lvm.c (grub_util_lvm_isvolume): Enable on FreeBSD and
GNU/kFreeBSD.
(LVM_DEV_MAPPER_STRING): Move from here ...
* include/grub/util/lvm.h (LVM_DEV_MAPPER_STRING): ... to here.
* util/getroot.c: Include `<grub/util/lvm.h>'.
(grub_util_get_dev_abstraction): Enable
grub_util_biosdisk_is_present() on FreeBSD and GNU/kFreeBSD.
Check for LVM abstraction on FreeBSD and GNU/kFreeBSD.
(grub_util_get_grub_dev): Replace "/dev/mapper/" with
`LVM_DEV_MAPPER_STRING'. Enable LVM and mdRAID only on platforms that
support it.
* util/grub-setup.c (main): Check for LVM also on FreeBSD and
GNU/kFreeBSD.
* util/grub.d/10_kfreebsd.in: Load `geom_linux_lvm' kernel module
when LVM abstraction is required for ${GRUB_DEVICE}.
Detect LSI MegaRAID SAS (`mfi') devices on GNU/kFreeBSD.
* util/deviceiter.c [__FreeBSD_kernel__] (get_mfi_disk_name): New
function.
[__FreeBSD_kernel__] (grub_util_iterate_devices): Scan for mfi
(/dev/mfid[0-9]+) devices using get_mfi_disk_name().
* grub-core/video/video.c (grub_video_edid_checksum): New function.
(grub_video_edid_preferred_mode): Likewise. Try EDID followed by
the Flat Panel extension, in line with the X.org VESA driver.
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_get_preferred_mode): Likewise.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
(grub_video_vbe_get_edid): New function.
(grub_video_vbe_adapter): Add get_edid.
* include/grub/video.h (struct grub_vbe_edid_info): New structure.
(struct grub_video_adapter): Add get_edid.
(grub_video_edid_checksum): Add prototype.
(grub_video_edid_preferred_mode): Likewise.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
* grub-core/commands/videoinfo.c (print_edid): New function.
(grub_cmd_videoinfo): Print EDID if available.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
* docs/grub.texi (Simple configuration): Update GRUB_GFXMODE
documentation.
* grub-core/Makefile.core.def (kernel): Remove kern/emu/getroot.c and
kern/emu/raid.c.
* grub-core/kern/emu/main.c (main): Don't try to guess root device. It's
useless.
* grub-core/kern/emu/misc.c (get_win32_path): Moved from here...
* util/getroot.c (get_win32_path): ... here.
* grub-core/kern/emu/misc.c (fini_libzfs): Moved from here...
* util/getroot.c (fini_libzfs): ... here.
* grub-core/kern/emu/misc.c (grub_get_libzfs_handle): Moved from here...
* util/getroot.c (grub_get_libzfs_handle): ... here.
* grub-core/kern/emu/misc.c (grub_find_zpool_from_dir):
Moved from here...
* util/getroot.c (grub_find_zpool_from_dir): ... here.
* grub-core/kern/emu/misc.c
(grub_make_system_path_relative_to_its_root): Moved from here...
* util/getroot.c (grub_make_system_path_relative_to_its_root): ... here.
* grub-core/kern/emu/getroot.c: Moved from here ...
* util/getroot.c: ... here. All users updated.
* grub-core/kern/emu/raid.c: Moved from here ...
* util/raid.c: ... here. All users updated.
* grub-core/Makefile.core.def (ata_pthru): Removed.
(ahci): New module.
(pata): Likewise.
* grub-core/bus/usb/ohci.c (GRUB_MOD_FINI): Unregister preboot hook
on unload.
* grub-core/commands/hdparm.c (grub_hdparm_do_ata_cmd): Use ATA
readwrite.
(grub_hdparm_do_check_powermode_cmd): Likewise.
(grub_hdparm_do_smart_cmd): Likewise.
(grub_hdparm_set_val_cmd): Likewise.
(grub_cmd_hdparm): Likewise. Check thta we have an ATA device.
* grub-core/disk/ahci.c: New file.
* grub-core/disk/ata.c: Factor out the low-level part into ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/ata_pthru.c: Contents moved to ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/scsi.c (grub_scsi_names): New array.
(grub_scsi_iterate): Use grub_scsi_names.
(grub_scsi_open): Likewise.
* grub-core/kern/disk.c (grub_disk_ata_pass_through): Removed.
* include/grub/ata.h (grub_ata_commands): Add DMA commands.
(grub_ata_regs_t): New struct.
(grub_disk_ata_pass_through_parms): Likewise.
(grub_ata_device): Renamed to ...
(grub_ata): ... this.
(grub_ata_dev): New struct.
Removed all low-level inline functions.
* include/grub/scsi.h: Add PATA and AHCI subsystems.
(grub_scsi_dev): Removed 'name' and 'id'. Added 'id' parameter to
iterate hooks and open. All users updated.
* util/grub-install.in: Handle AHCI disk module.
Detect `ataraid' devices on GNU/kFreeBSD. Fix for ATA devices using
`ata' driver on kernel of FreeBSD 9.
* util/deviceiter.c [__FreeBSD_kernel__] (get_ada_disk_name)
(get_ataraid_disk_name): New functions.
[__FreeBSD_kernel__] (grub_util_iterate_devices): Scan for ataraid
(/dev/ar[0-9]+) and ada (/dev/ada[0-9]+) devices using
get_ataraid_disk_name() and get_ada_disk_name().
allow both endiannesses coexist.
* configure.ac: proparate target_cpu=mipsel rather than resetting to
mips. All conditions adjusted.
* tests/util/grub-shell-tester.in: Remove gratuitious target_cpu
variable.
* util/grub-install.in: Adjust conditions to take renaming into account.
* util/grub-mkimage.c (image_targets): Likewise. New target
mips-qemu_mips-elf for bigendian mips.
* grub-core/boot/decompressor/none.c (grub_decompress_core): Exit
early if src == dest.
* util/grub-mkimage.c (generate_image): Arange for src == dest if
compression is none.
as opposed to after.
* grub-core/Makefile.core.def (kernel): Increase linking address.
(none_decompress): Likewise.
(xz_decompress): Likewise.
* grub-core/boot/mips/startup_raw.S: Use prewritten uncompression
address.
* grub-core/kern/mips/arc/init.c (grub_machine_init): Handle memory
layout change.
(grub_arch_modules_addr): New function.
* grub-core/kern/mips/init.c (grub_arch_modules_addr): Moved from here...
* grub-core/kern/mips/loongson/init.c (grub_arch_modules_addr): .. here
* grub-core/kern/mips/qemu_mips/init.c (grub_arch_modules_addr): ... and
here.
* grub-core/kern/mips/startup.S (total_size): Rename to ...
(grub_total_modules_size): ... this. Make global.
[GRUB_MACHINE_ARC]: Don't attempt to move modules out of the bss.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_ADDR):
New definition.
(GRUB_KERNEL_MIPS_QEMU_MIPS_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MACHINE_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_LINK_ADDR): Increased.
* util/grub-mkimage.c (image_target_desc): New flag
PLATFORM_FLAGS_MODULES_BEFORE_KERNEL.
(image_targets): Set PLATFORM_FLAGS_MODULES_BEFORE_KERNEL on mips-arc.
(generate_image): Handle images with modules before kernel.
and GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT, which replace
GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT (complementing the
existing options which append).
* docs/grub.texi (Simple configuration): Document new options.
Reported by: Ian Jackson. Fixes Debian bug #617538.
* Makefile.util.def (libgrubmods.a): Add dvh.c.
* conf/Makefile.common (CCASFLAGS_PLATFORM): Add -mips3 on all mips
platforms.
* configure.ac: New target mips-arc.
* gentpl.py: Likewise.
* grub-core/Makefile.am: Likewise.
* grub-core/Makefile.core.def: Likewise.
(xz_decompress): Remove -D GRUB_MACHINE_LINK_ADDR.
(none_decompress): Likewise.
(lsdev): New module.
(datetime): Use lib/arc/datetime.c on ARC.
(part_dvh): New module.
* grub-core/commands/arc/lsdev.c: New file.
* grub-core/disk/arc/arcdisk.c: Likewise.
* grub-core/kern/mips/arc/init.c: Likewise.
* grub-core/kern/mips/cache_flush.S: Don't flush non 4-byte
aligned addresses.
* grub-core/kern/mips/dl.c (grub_arch_dl_check_header): Fix bigendian
support.
(grub_arch_dl_relocate_symbols): Likewise.
* grub-core/kern/mips/loongson/init.c (grub_get_rtc): Moved from here...
* grub-core/kern/mips/init.c (grub_get_rtc): ... here.
* grub-core/kern/mips/startup.S (grub_arch_cpuclock): Have on all
platforms.
* grub-core/lib/arc/datetime.c: New file.
* grub-core/loader/mips/linux.c: Always include time.h. Don't include
pci.h on non-loongson.
(envp_off) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove.
(grub_linux_boot): Set unused registers to 0.
(grub_cmd_linux) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove envp.
* grub-core/mmap/mips/loongson/uppermem.c: Moved from here ...
* grub-core/mmap/mips/uppermem.c: ...here.
* grub-core/partmap/dvh.c: New file.
* grub-core/term/arc/console.c: Likewise.
* grub-core/term/terminfo.c (ANSI_C0_STR): New const.
(grub_terminfo_set_current): Add terminal "arc".
(grub_terminfo_readkey): Support ARC sequences.
* include/grub/arc/arc.h: New file.
* include/grub/arc/console.h: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_ARCDISK_ID.
* include/grub/mips/arc/kernel.h: New file.
* include/grub/mips/arc/memory.h: Likewise.
* include/grub/mips/arc/time.h: Likewise.
* include/grub/mips/loongson/kernel.h (grub_halt): Moved from here ...
* include/grub/mips/kernel.h (grub_halt): ... here.
* include/grub/mips/loongson.h (GRUB_CPU_REGISTER_WRAP): Moved from
here...
* include/grub/mips/mips.h (GRUB_CPU_REGISTER_WRAP): ... here.
(GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): Moved from here ...
* include/grub/mips/mips.h (GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): .. here
* include/grub/mips/loongson/kernel.h (grub_reboot): Removed redundant
proto.
* include/grub/mips/loongson/memory.h (GRUB_ARCH_LOWMEMVSTART): Moved
from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMVSTART): ... here.
(GRUB_ARCH_LOWMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMPSTART): ... here.
(GRUB_ARCH_LOWMEMMAXSIZE): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMMAXSIZE): ... here.
(GRUB_ARCH_HIGHMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_HIGHMEMPSTART): ... here.
(grub_phys_addr_t): Moved from here ...
* include/grub/mips/memory.h (grub_phys_addr_t): ... here.
(grub_vtop): Moved from here ...
* include/grub/mips/memory.h (grub_vtop): ... here.
(grub_map_memory): Moved from here ...
* include/grub/mips/memory.h (grub_map_memory): ... here.
(grub_unmap_memory): Moved from here ...
* include/grub/mips/memory.h (grub_unmap_memory): ... here.
(grub_machine_mmap_iterate): Moved from here ...
* include/grub/mips/memory.h (grub_machine_mmap_iterate): ... here.
(grub_mmap_get_lower): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_lower): ... here.
(grub_mmap_get_upper): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_upper): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_get_rtc): Moved from
here ...
* include/grub/mips/time.h (grub_get_rtc): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_cpu_idle): Moved from
here ...
* include/grub/mips/time.h (grub_cpu_idle): ... here.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_ARC_LINK_ADDR): New
definition.
(GRUB_KERNEL_MIPS_ARC_LINK_ALIGN): Likewise.
(GRUB_KERNEL_MIPS_ARC_COMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_TOTAL_MODULE_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX_END): Likewise.
(GRUB_KERNEL_MIPS_ARC_MOD_ALIGN): Likewise.
(GRUB_MACHINE_LINK_ADDR): Likewise.
* include/grub/terminfo.h (GRUB_TERMINFO_READKEY_MAX_LEN): Increased
to 6.
* util/grub-install.in: Run dvhtool on ARC.
* util/grub-mkimage.c (image_targets): Add mips-arc.
* Makefile.util.def (libgrubmods.a): Add grub-core/kern/ia64/dl_helper.c
* configure.ac: Add ia64-efi target.
Probe for __ia64_trampoline, __udivsi3, __umoddi3, __udivdi3,
__divsi3, __modsi3, __umodsi3, __moddi3 and __divdi3 symbols.
* gentpl.py: Add ia64_efi platform.
Rename x86_efi to efi and Add ia64-efi. All users updated.
* grub-core/Makefile.am: Set KERNEL_HEADER_FILES for ia64-efi.
* grub-core/Makefile.core.def (kernel.img): Add compile flags for ia64.
Remove kern/generic/rtc_get_time_ms.c on EFI.
Add kern/ia64/efi/startup.S, kern/ia64/efi/init.c, kern/ia64/dl.c,
kern/ia64/dl_helper.c on ia64-efi.
Add kern/emu/cache.c on emu.
(linux): Use on loader/ia64/efi/linux.c on ia64.
* grub-core/gensymlist.sh (grub_register_exported_symbols): Check
whether symbol is a function.
* grub-core/kern/dl.c [GRUB_MACHINE_EMU]: Include sys/mman.h.
(grub_symbol): New field 'isfunc'.
(grub_dl_resolve_symbol): Return whole symbol rather than just address.
(grub_dl_register_symbol): New argument 'isfunc'. All users updated.
(grub_dl_load_segments): Place all sections into the same region.
[__ia64__]: Create trampolines and got.
[GRUB_MACHINE_EMU]: Call mprotect.
(grub_dl_resolve_symbols): Resolve symbol type as well.
[__ia64__]: Create function descriptors.
* grub-core/kern/efi/efi.c (grub_get_rtc): Renamed to ...
(grub_rtc_get_time_ms): ... this. Expressions simplified.
(grub_get_rtc): New function.
* grub-core/kern/emu/cache.c [__ia64__]: New file.
* grub-core/kern/emu/cache.S: Renamed to ...
* grub-core/kern/emu/cache_s.S: ... this.
[__ia64__]: Add a nop.
* grub-core/kern/emu/full.c (grub_arch_dl_get_tramp_got_size)
[__ia64__]: New function.
* grub-core/kern/emu/lite.c [__ia64__]: Include ../ia64/dl.c.
* grub-core/kern/ia64/dl.c: New file.
* grub-core/kern/ia64/dl_helper.c: Likewise.
* grub-core/kern/ia64/efi/init.c: New file.
* grub-core/kern/ia64/efi/startup.S: Likewise.
* grub-core/lib/efi/halt.c [__ia64__]: Don't try acpi.
* grub-core/lib/ia64/longjmp.S: New file (from glibc).
* grub-core/lib/ia64/setjmp.S: Likewise (from glibc).
* grub-core/lib/setjmp.S [__ia64__]: Include ./ia64/setjmp.S.
* grub-core/loader/ia64/efi/linux.c: New file.
* include/grub/dl.h (GRUB_MOD_NAME): Redefined using C rather than asm.
(GRUB_MOD_DEP): Likewise.
(grub_dl) [__ia64__]: New fields got and tramp.
(grub_dl): New field 'base'.
(grub_dl_register_symbol): New argument isfunc. All users updated.
(GRUB_IA64_DL_TRAMP_ALIGN): New definition.
(GRUB_IA64_DL_TRAMP_SIZE): Likewise.
(GRUB_IA64_DL_GOT_ALIGN): Likewise.
(grub_ia64_dl_get_tramp_got_size): New proto.
(GRUB_ARCH_DL_TRAMP_ALIGN) [__ia64__]: Likewise
(GRUB_ARCH_DL_GOT_ALIGN) [__ia64__]: Likewise
(grub_arch_dl_get_tramp_got_size) [__ia64__]: Likewise
* include/grub/efi/api.h: Skip call wrappers on ia64.
* include/grub/efi/pe32.h (GRUB_PE32_MACHINE_IA64): New definition.
* include/grub/efi/time.h (GRUB_TICKS_PER_SECOND): Change to 1000.
* include/grub/elf.h (ELF_ST_INFO): New definition.
* include/grub/ia64/efi/kernel.h: New file.
* include/grub/ia64/efi/memory.h: Likewise.
* include/grub/ia64/efi/time.h: Likewise.
* include/grub/ia64/kernel.h: Likewise.
* include/grub/ia64/setjmp.h: Likewise (from glibc).
* include/grub/ia64/time.h: New file.
* include/grub/ia64/types.h: Likewise.
* include/grub/libgcc.h (__udivsi3, __umodsi3, __umoddi3, __udivdi3,
__moddi3, __divdi3, __divsi3, __modsi3, __ia64_trampoline):
New protos.
* include/grub/offsets.h (GRUB_KERNEL_IA64_EFI_PREFIX): New definition.
(GRUB_KERNEL_IA64_EFI_PREFIX_END): Likewise.
* include/grub/types.h (PRIxGRUB_ADDR): Likewise.
* util/grub-mkimage.c (image_target_desc): New field pe_target.
All users updated.
(EFI64_HEADER_SIZE): New definition. All users updated.
(image_targets): Add ia64-efi.
* util/grub-mkimagexx.c (relocate_symbols): New arguments jumpers and
jumpers_addr. All users updated.
Create function descriptors.
(count_funcs): New function.
(unaligned_uint32): New struct.
(MASK20): New definition.
(MASK19): Likewise.
(MASKF21): Likewise.
(add_value_to_slot_20b): New function.
(add_value_to_slot_21_real): Likewise.
(add_value_to_slot_21): Likewise.
(ia64_kernel_trampoline): New struct.
(nopm): New variable.
(jump): Likewise.
(make_trampoline): New function.
(relocate_addresses): Handle ia64.
(make_reloc_section): Likewise.
(load_image): Likewise.
Also-By: Robert Millan <rmh.grub@aybabtu.com>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
* util/grub-pe2elf.c (MODLICENSE_SECTION): New definition. All following
sections shifted.
(insert_string): Make argument const char * instead of char *.
(write_section_data): Handle long section names.
Handle module_license.
New function.
(grub_util_biosdisk_close): Use grub_util_biosdisk_flush.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_flush): New proto.
* util/grub-setup.c (setup): Use grub_util_biosdisk_flush.
is disabled, even if no partition table is found.
Otherwise, the BIOS on Dell Latitude E series laptops will freeze
during POST if an invalid partition table is contained in the PBR
of the active partition when GRUB is installed to a partition.
empty, since in that case we can only generate either nothing or a
syntactically invalid configuration file.
Reported by: Michal Suchanek. Fixes Debian bug #612898.
* conf/Makefile.common (STRIPFLAGS_KERNEL): Add -F elf32-i386 and
-R .drectve on cygwin.
* conf/i386-pc-cygwin-img-ld.sc: Merge rdata and pdata into data.
* configure.ac: Use $(top_builddir) in TARGET_OBJ2ELF.
(COND_CYGWIN): New condition.
* grub-core/Makefile.am (%.mod): Set TARGET_OBJ2ELF.
* grub-core/genmod.sh.in: Use ${TARGET_OBJ2ELF} and
not @TARGET_OBJ2ELF@.
* util/grub-pe2elf.c (write_symbol_table): Use pe_symtab->type and not
type to determine whether aux is to be used.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_edid_checksum): Likewise.
(grub_vbe_get_preferred_mode): Likewise. Try EDID followed by the
Flat Panel extension, in line with the X.org VESA driver.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
(struct grub_vbe_edid_info): Likewise.
(grub_vbe_bios_get_flat_panel_info): Add prototype.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
(pc_partition_map_embed): Check for and avoid sectors matching any
of the signatures in embed_signatures.
* util/grub-setup.c (setup): Allow for the embedding area being
split into multiple blocklists.
* util/deviceiter.c (grub_util_iterate_devices): Increase SCSI
limit to 48 (to cope with Sun Fire X4500), and IDE limit to 96
(its SATA disks are detected as slaveless IDE master drives on
kFreeBSD).
Reported by Carsten Aulbert.
(arguments): New member allow_floppy.
(argp_parser): Handle --allow-floppy.
(main): Pass allow_floppy.
* util/grub-install.in: New option --allow-floppy passed though to
grub-setup.
* util/grub-mkconfig.in: Merge `GRUB_DISABLE_LINUX_RECOVERY' and
`GRUB_DISABLE_NETBSD_RECOVERY' into a single `GRUB_DISABLE_RECOVERY'
variable. All references updated.
* util/grub.d/10_kfreebsd.in: Support recovery boot entries.
* grub-core/disk/raid.c (grub_raid_getname) [GRUB_UTIL]: New function.
(insert_array): New argument raid.
* include/grub/disk.h (grub_disk_dev) [GRUB_UTIL]: New member raidname.
* include/grub/raid.h (grub_raid_array) [GRUB_UTIL]: New member driver.
* util/grub-probe.c (probe): PRint raidname instead of plainly "mdraid".
* Makefile.util.def (grub-setup): Add grub-core/lib/reed_solomon.c.
* grub-core/Makefile.am (rs_decoder.S): New target.
(kern/i386/pc/startup.S): Depend on rs_decoder.S.
* grub-core/kern/i386/pc/startup.S (reed_solomon_redundancy): New field.
(multiboot): Move to RS part.
(post_reed_solomon): New label.
(grub_boot_drive): Move to non-RS part since it's modified in memory
on boot.
Include rs_decoder.S.
* grub-core/lib/reed_solomon.c: New file.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY):
New definition.
(GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE): Removed.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Updated.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): New definition.
* include/grub/partition.h (grub_partition_map): Change prototype of
embed to allow returning additional sectors.
* include/grub/reed_solomon.h: New file.
* util/grub-setup.c (setup): Handle Reed-Solomon.
* Makefile.util.def (libgrub.a): Add grub-core/partmap/bsdlabel.c.
* grub-core/disk/efi/efidisk.c (grub_efidisk_get_device_name):
Properly handle concatenation.
* grub-core/kern/device.c (grub_device_iterate): Likewise.
* grub-core/normal/completion.c (iterate_partition): Likewise.
* grub-core/kern/disk.c (grub_disk_open): Make disk->name not
contain partition. All users updated.
* grub-core/partmap/bsdlabel.c (grub_netbsdlabel_partition_map): New
struct.
(grub_openbsdlabel_partition_map): Likewise.
(bsdlabel_partition_map_iterate): Rename to ..
(iterate_real): ... this. New arguments sector, freebsd and pmap.
(bsdlabel_partition_map_iterate): New function.
(netopenbsdlabel_partition_map_iterate): Likewise.
(netbsdlabel_partition_map_iterate): Likewise.
(openbsdlabel_partition_map_iterate): Likewise.
(GRUB_MOD_INIT): Register new partmaps.
(GRUB_MOD_FINI): Unregister new partmaps.
* grub-core/partmap/msdos.c (pc_partition_map_iterate): Rename to ...
(grub_partition_msdos_iterate): ... this. All users updated.
Don't support embedding other than in a minix partition.
* include/grub/msdos_partition.h (grub_partition_msdos_iterate): New
proto.
* include/grub/partition.h (grub_partition): New field msdostype.
* util/grub-install.in: Handle openbsd and netbsd types being in
part_bsd module.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
* Makefile.util.def (grub-mklayout): New file.
(grub-kbdcomp): New script.
* grub-core/Makefile.am (KERNEL_HEADER_FILES) [COND_mips_yeeloong]:
Add keyboard_layouts.h.
* grub-core/Makefile.core.def (kernel): Add commands/keylayouts.c and
commands/boot.c on yeeloong.
(keylayouts): New module.
* grub-core/bus/usb/ohci.c
* grub-core/bus/usb/uhci.c
* grub-core/bus/usb/usbhub.c (rescan): New variable.
(grub_usb_add_hub): Poll interrupt pipe for device handling.
(attach_root_port): Likewise.
(poll_nonroot_hub): Likewise.
(grub_usb_poll_devices): Likewise.
(detach_device): Close transfer.
* grub-core/bus/usb/usbtrans.c (grub_usb_execute_and_wait_transfer): New
function.
(grub_usb_bulk_setup_readwrite): Likewise.
(grub_usb_bulk_finish_readwrite): Likewise.
* grub-core/commands/keylayouts.c: New file.
* grub-core/commands/keystatus.c (grub_getkeystatus): New function.
* grub-core/commands/menuentry.c (hotkey_aliases): All several new
aliases.
* grub-core/term/at_keyboard.c: Restructured to use keylayouts and
support scancode 2.
* grub-core/term/usb_keyboard.c: Restructured to use keylayouts.
* include/grub/keyboard_layouts.h: New file.
* util/grub-mklayout.c: New file.
* util/grub-kbdcomp.in: Likewise.
Also-By: Aleš Nesrsta <starous@volny.cz>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot)
[GRUB_UTIL]: New variable.
(gpt_partition_map_iterate): Set part.parent.
(gpt_partition_map_embed) [GRUB_UTIL]: New function.
(grub_gpt_partition_map) [GRUB_UTIL]: Set .embed.
* grub-core/partmap/msdos.c (pc_partition_map_embed) [GRUB_UTIL]:
New function.
(grub_msdos_partition_map) [GRUB_UTIL]: Set .embed.
* include/grub/partition.h (grub_embed_type_t) [GRUB_UTIL]: New type.
(grub_partition_map) [GRUB_UTIL]: New field embed.
* util/grub-setup.c (grub_gpt_partition_type_bios_boot): Removed.
(setup): Use ->embed.
All users updated.
* disk/loopback.c (grub_loopback): Remove has_partitions.
All users updated.
(options): Remove partitions. All users updated.
* util/grub-fstest.c (fstest): Don't pass "-p" to loopback.
* util/i386/pc/grub-setup.c (setup): copy partition table only when
actual partition table is found.
* configure.ac (GRUB_KERNEL_MACHINE_LINK_ADDR): Removed.
* grub-core/Makefile.core.def (kernel): Make ldflags just use the
right address. Add sparc64_ieee1275_ldflags.
* grub-core/loader/sparc64/ieee1275/linux.c: Remove leftover include.
* util/grub-mkimagexx.c (locate_sections): Correct grub_host_to_target32
to grub_host_to_target_addr
(load_image): Likewise.
Set prefix_drive on EFI and PC to (,$grub_partition) as last resort.
* util/i386/pc/grub-setup.c (setup): Don't touch prefix.
Fixes a bug reported by Yves Blusseau.
and grub-core/disk/host.c to ...
(grub-fstest): ... here. Having the host disk implementation
present confuses grub-probe and other utility programs.
* util/grub-mkconfig.in: Only verify readability of grub.cfg.new
when writing to a file, not when writing to stdout.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
* util/grub-mkconfig_lib.in (is_path_readable_by_grub): Improve
with (optional) parameters to specify device and relative path.
* util/grub-install.in: Use is_path_readable_by_grub() to
verify readability of a few critical files.
* util/grub-mkconfig.in: Use is_path_readable_by_grub() to
verify readability of grub.cfg.new.
* grub-core/boot/i386/pc/lnxboot.S: Use
GRUB_KERNEL_I386_PC_MULTIBOOT_SIGNATURE.
* grub-core/kern/i386/pc/startup.S: Move grub_prefix to compressed part.
* include/grub/offsets.h: Rename GRUB_MACHINE_DATA_END to
GRUB_MACHINE_PREFIX_END. All users updated.
(GRUB_KERNEL_I386_PC_PREFIX): Set to GRUB_KERNEL_I386_PC_RAW_SIZE.
(GRUB_KERNEL_I386_PC_PREFIX_END): Set to GRUB_KERNEL_I386_PC_PREFIX
+ 0x40.
(GRUB_KERNEL_I386_PC_RAW_SIZE): Decrease.
* util/grub-mkimage.c (image_target_desc): Change data_end to
prefix_end. All users updated.
* util/grub-mkimage.c (image_target_desc): New enum value
IMAGE_I386_PC_PXE.
(image_targets): New target i386-pc-pxe.
(generate_image): Handle i386-pc-pxe image.
* util/grub-mkimage.c (image_target_desc): New enum value
IMAGE_I386_PC_PXE.
(image_targets): New target i386-pc-pxe.
(generate_image): Handle i386-pc-pxe image.
Make kFreeBSD code more generic to support ext2fs as root, ufs as
a separate module and maybe other interesting combinations.
* util/grub.d/10_kfreebsd.in (load_kfreebsd_module): New function.
(kfreebsd_entry): Use load_kfreebsd_module() to load modules.
(kfreebsd_entry): Add generic filesystem module load routine.
Map GRUB `ext2' to kFreeBSD `ext2fs'.
* util/grub.d/10_kfreebsd.in: Initialize ${kfreebsd_device} as the
kFreeBSD device name, except on ZFS where the filesystem label is
used.
(kfreebsd_entry): On ZFS root, load `opensolaris.ko', `zfs.ko' and
`/boot/zfs/zpool.cache'.
Set mountfrom kernel variable using ${kfreebsd_device}.
Make it even harder to use uninitialized `libzfs_handle' (and
make the interface a bit simpler).
* include/grub/util/misc.h (grub_util_init_libzfs)
(libzfs_handle): Remove.
(grub_get_libzfs_handle): New prototype.
* util/misc.c [HAVE_LIBZFS] (libzfs_handle): Add `static'
attribute.
(grub_util_init_libzfs): Remove.
(grub_get_libzfs_handle): New function.
* kern/emu/getroot.c (find_root_device_from_libzfs): Use
grub_get_libzfs_handle() to obtain a libzfs handle instead of
accessing `libzfs_handle' directly.
Prevent accidental use of uninitialized libzfs_handle.
* util/grub-probe.c (main): Move grub_util_init_libzfs() call to ...
* kern/emu/getroot.c (find_root_device_from_libzfs): ... here.
* util/misc.c (grub_util_init_libzfs): Make this function idempotent.
Enable `grub-probe -t device' resolution on ZFS.
* configure.ac: Check for getfsstat(), libzfs and libnvpair.
* include/grub/util/libnvpair.h: New file.
* include/grub/util/libzfs.h: New file.
* kern/emu/getroot.c: Include `<assert.h>' and `<error.h>'.
[HAVE_LIBZFS && HAVE_LIBNVPAIR]: Include `<grub/util/libzfs.h>' and
`<grub/util/libnvpair.h>'.
[HAVE_GETFSSTAT]: Include `<sys/mount.h>'.
(find_mount_point_from_dir): New static function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (find_root_device_from_libzfs): New
function.
[HAVE_LIBZFS && HAVE_LIBNVPAIR] (grub_guess_root_device): Use
find_root_device_from_libzfs() before ressorting to find_root_device().
* include/grub/util/misc.h (grub_util_init_libzfs): New function
prototype.
* util/misc.c: Include `<grub/util/libzfs.h>'.
(grub_util_init_libzfs): New function.
[HAVE_LIBZFS] (libzfs_handle): New global variable.
[HAVE_LIBZFS] (fini_libzfs): New static function.
(grub_util_init_libzfs): New function.
* util/grub-probe.c (main): Call grub_util_init_libzfs().
2010-07-20 Colin Watson <cjwatson@ubuntu.com>
Generate device.map in something closer to the old ordering.
* util/deviceiter.c (struct device): New declaration.
(compare_file_names): Rename to ...
(compare_devices): ... this. Sort by kernel name in preference to
the stable by-id name, but keep the latter as a fallback comparison.
Update header comment.
(grub_util_iterate_devices) [__linux__]: Construct and sort an array
of `struct device' rather than of plain file names.
Also-By: Colin Watson <cjwatson@ubuntu.com>
* disk/raid.c (insert_array): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Add start_sector
parameter. Set its pointer target to 0.
* disk/mdraid_linux.c (grub_mdraid_detect): Add start_sector
parameter. Set its pointer target to 0 for 0.9 metadata, or to the
`data_offset' value from the superblock for 1.x metadata.
* disk/raid.c (grub_raid_read): Offset reads by the start sector of
data on the device.
(insert_array): Record the start sector of data on the device.
(grub_raid_register): Pass start_sector parameters to
grub_raid_list->detect and insert_array.
* include/grub/raid.h (struct grub_raid_array): Add start_sector
member.
(struct grub_raid): Add start_sector parameter to `detect'.
* disk/mdraid_linux.c (struct grub_raid_super_1x): Remove
__attribute__ ((packed)), leaving a comment.
(grub_mdraid_detect): Split out 0.9 and 1.x detection to ...
(grub_mdraid_detect_09): ... here and ...
(grub_mdraid_detect_1x): ... here.
2010-07-20 Peter Henn <peter.henn@web.de>
* disk/mdraid_linux.c (grub_mdraid_detect): Fix calculation of 1.x
chunk size and disk size, which are already given as sector counts
as distinct from the 0.90 units. Fetch the correct device number
from the role table instead of using the table index.
2010-07-20 Felix Zielcke <fzielcke@z-51.de>
* disk/dmraid_nvidia.c (grub_dmraid_nv_detect): Set array->name to NULL.
* disk/mdraid_linux.c (grub_raid_super_1x): New structure.
(WriteMostly1): New macro.
Set array->name to NULL for metadata format 0.90. Add support for
metadata 1.x. Fix some comments.
* disk/raid.c (): Add support for name based RAID arrays. Fix a
few comments.
* util/getroot.c (grub_util_get_grub_dev): Add support for
/dev/md/name style devices.
Also-By: Peter Henn <peter.henn@web.de>
Also-By: Colin Watson <cjwatson@ubuntu.com>
removing the homehost if present.
* kern/emu/getroot.c (get_mdadm_name) [__linux__]: New function.
(grub_util_get_grub_dev): Use md/%s to name mdadm 1.x devices,
removing the homehost if present.
(grub_util_get_grub_dev) [__linux__]: Get the array name from mdadm
if possible.
* util/i386/pc/grub-setup.c (main): Handle md/* devices.
install_prefix, in line with install_dos_part and install_bsd_part.
Add new prefix variable, which is copied to install_prefix after
comparing core.img in memory with the one read from disk in the
no-embedding case, and use that rather than overwriting
install_prefix immediately when installing to a partition.
Fixes Debian bug #586621; based on patches by Matt Kraai and M. Vefa
Bicakci.
* util/grub-mkconfig.in: Export `GRUB_BADRAM' variable.
* util/grub.d/00_header.in: When `GRUB_BADRAM' is set, issue badram
command using ${GRUB_BADRAM} as parameter.
possible on Linux.
* util/deviceiter.c (check_device): Rename to ...
(check_device_readable_unique): ... this. Update all callers.
Maintain and check a list of which devices (by canonicalized name)
have already been seen.
(clear_seen_devices): New function.
(compare_file_names) [__linux__]: New function.
(grub_util_iterate_devices): Clear the list of seen devices on exit
and (just in case) on entry.
(grub_util_iterate_devices) [__linux__]: Iterate over non-partition
devices in /dev/disk/by-id/, in sorted order. Remove DM-RAID
seen-devices list, superseded by general code in check_device.
setting GRUB_VIDEO_BACKEND. Make it available as a user override
instead. Replace the gfxterm backend check with a check that
${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
(load_video): New generated function. Call it before loading
gfxterm rather than loading ${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
Use video functions in linux and xnu loaders.
* conf/i386-pc.rmk (xnu_mod_SOURCES): Remove loader/i386/pc/xnu.c.
* conf/x86-efi.rmk (xnu_mod_SOURCES): Remove loader/i386/efi/xnu.c.
* include/grub/i386/xnu.h (grub_xnu_set_video): Removed.
* loader/i386/efi/linux.c (grub_linux_setup_video): Copied from
loader/i386/pc/linux.c.
(grub_linux_boot): Resynced with loader/i386/pc/linux.c.
(find_line_len): Removed.
(find_framebuf): Likewise.
(grub_cmd_linux): Declare grub_linux_boot as possibly returning.
* loader/i386/efi/xnu.c: Removed.
* loader/i386/pc/xnu.c: Moved from here...
* loader/i386/xnu.c: ...here.
Enable priorities in video drivers.
* include/grub/video.h (grub_video_adapter_prio_t): New type.
(grub_video_adapter): New field prio.
(grub_video_register): Respect prio when inserting.
* video/efi_gop.c (grub_video_gop_adapter): Add prio.
* video/efi_uga.c (grub_video_uga_adapter): Likewise.
* video/emu/sdl.c (grub_video_sdl_adapter): Likewise.
* video/i386/pc/vbe.c (grub_video_vbe_adapter): Likewise.
* video/i386/pc/vga.c (grub_video_vga_adapter): Likewise.
* video/ieee1275.c (grub_video_ieee1275_adapter): Likewise.
* video/sm712.c (grub_video_sm712_adapter): Likewise.
Fix SDL driver ID.
* include/grub/video.h (grub_video_driver_id_t): New value
GRUB_VIDEO_DRIVER_SDL.
* video/emu/sdl.c (grub_video_sdl_adapter): Add id.
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
available as a user override instead. Replace the gfxterm backend
check with a check that ${GRUB_PREFIX}/video.lst is non-empty.
* util/grub.d/00_header.in (load_video): New generated function.
Call it before loading gfxterm rather than loading
${GRUB_VIDEO_BACKEND}.
* util/grub.d/10_linux.in (linux_entry): Call load_video.
* util/grub.d/30_os-prober.in (osx_entry): Likewise.
* docs/grub.texi (Simple configuration): Document
GRUB_VIDEO_BACKEND.
#585068). Note that the case where the core image is booted using
multiboot and relocated from its original location still requires
more work.
* kern/i386/pc/init.c (make_install_device): If the prefix starts
with "(,", fill the boot drive in between those two characters, but
expect that a full partition specification including partition map
names will follow.
* util/i386/pc/grub-setup.c (setup): Unless an explicit prefix was
specified, write a prefix without the drive name but including a
full partition specification.
compatibility with older versions (before 2010-06-12) which did the
same. In particular, this makes it easier to ship an update-grub
wrapper which is compatible with that used with GRUB Legacy (Debian
bug #586056).
* util/grub.d/00_header.in: Use GRUB_PREFIX rather than computing it
again.
* util/grub.d/10_linux.in (linux_entry): Load all video drivers,
which may be needed to allow the loader to program modes for the
kernel.
(grub_device_mapper_supported): New function.
* include/grub/emu/misc.h (grub_device_mapper_supported): Add
prototype.
* kern/emu/hostdisk.c (find_partition_start): Check whether
device-mapper is supported before trying to use it.
* util/deviceiter.c (grub_util_iterate_devices): Likewise.
-DGRUB_PKGLIBROOTDIR= and prepend @PACKAGE_TARNAME@. All users updated.
* util/grub-mkimage.c (image_targets): Add i386-multiboot.
(main): Add a slash after pkglibdirroot.
* util/hostdisk.c (device_is_mapped): New function.
(find_partition_start): New function, partly broken out from
linux_find_partition and grub_util_biosdisk_get_grub_dev but with
device-mapper support added.
(linux_find_partition): Use find_partition_start.
(convert_system_partition_to_system_disk): Add `st' argument.
Support Linux /dev/mapper/* devices if device-mapper support is
available; only DM-RAID devices are understood at present.
(find_system_device): Add `st' argument. Pass it to
convert_system_partition_to_system_disk.
(grub_util_biosdisk_get_grub_dev): Pass stat result to
find_system_device and convert_system_partition_to_system_disk. Use
find_partition_start.
* conf/common.rmk (grub_mkdevicemap_SOURCES): Add kern/env.c,
kern/err.c, kern/list.c, kern/misc.c, and kern/emu/mm.c.
* util/deviceiter.c [__linux__]: Define MINOR.
(grub_util_iterate_devices): Add support for DM-RAID disk devices.
* util/mkdevicemap.c (grub_putchar): New function.
(grub_getkey): New function.
(grub_refresh): New function.
(main): Set debug=all if -v -v is used.
we handle finding grub-mkimage. Default to finding grub-mkimage in
${bindir} with program_transform_name applied, and provide a
--grub-mkimage option to override this.
