All users updated. If easily=1 require raid-5/-6 to be full.
(is_node_readable): Likewise.
(scan_devices): Scan incomplete but readable LVs at the end.
(grub_diskfilter_memberlist): Pull missing devices.
(insert_array): Skip scanning until device is complete or scan is
done otherwise.
* grub-core/disk/mdraid1x_linux.c (grub_mdraid_detect): Fix wrong
check.
* include/grub/diskfilter.h (grub_diskfilter_lv): New member scanned.
* util/raid.c (grub_util_raid_getmembers): Handle "removed" disks.
(write_section_data): Rename name to shname to avoid shadowing.
(write_symbol_table): Rename name to symname to avoid shadowing.
Fix write_reloc_section call.
* grub-core/Makefile.core.def (xnu): Add file lzss.c
* grub-core/loader/lzss.c: New file.
* grub-core/loader/xnu.c (grub_xnu_load_driver): Close binaryfile
on Mach-O open failure.
* grub-core/loader/macho.c (grub_macho_close): Free uncompressedXX.
Don't free cmdsXX in uncompressedXX is set.
(grub_macho_file): Init new fields.
New argument is_64bit. All users updated.
Handle compressed. Error out if no suitable architecture is found.
Don't close file.
(grub_macho_open): New argument is_64bit. All users updated.
* grub-core/loader/macho32.c: Add defines for new fields.
* grub-core/loader/macho64.c: Likewise.
* grub-core/loader/machoXX.c (grub_macho_contains_macho): Make static.
(grub_macho_parse): Handle compressed.
Defer actual processing if compressed.
(grub_macho_cmds_iterate): Decompress if compressed. New argument
"filename". All users updated.
(grub_macho_size): New argument "filename". All users updated.
(grub_macho_get_entry_point): Likewise.
(grub_macho_load): Handle compressed.
* include/grub/macho.h (grub_macho_lzss_header): New struct.
(GRUB_MACHO_LZSS_OFFSET): New define.
(grub_decompress_lzss): New proto.
* include/grub/machoload.h (grub_macho_file): New fields to handle
compressed.
(grub_macho_contains_macho64): Remove proto.
(grub_macho_contains_macho32): Likewise.
* util/grub.d/30_os-prober.in: Use kernel cache if available.
embed to take a maximum value for nsectors.
* include/grub/emu/hostdisk.h (grub_util_ldm_embed): Likewise.
* include/grub/fs.h (grub_fs): Likewise.
* grub-core/partmap/msdos.c (embed_signatures): New array.
(pc_partition_map_embed): Check for and avoid sectors matching any
of the signatures in embed_signatures, up to max_nsectors.
* grub-core/partmap/gpt.c (gpt_partition_map_embed): Restrict
returned sector map to max_nsectors.
* grub-core/disk/ldm.c (grub_util_ldm_embed): Likewise.
* grub-core/fs/btrfs.c (grub_btrfs_embed): Likewise.
* grub-core/fs/zfs/zfs.c (grub_zfs_embed): Likewise.
* util/grub-setup.c (setup): Allow for the embedding area being
split into multiple blocklists. Tell dest_partmap->embed the
maximum number of sectors we care about.
* util/getroot.c (btrfs_ioctl_dev_info_args) [__linux__]: New struct.
(btrfs_ioctl_fs_info_args) [__linux__]: Likewise.
(BTRFS_IOC_DEV_INFO) [__linux__]: New define.
(BTRFS_IOC_FS_INFO) [__linux__]: Likewise.
(grub_find_root_devices_from_btrfs) [__linux__]: New function.
(grub_find_root_devices_from_mountinfo) [__linux__]: Use
grub_find_root_devices_from_btrfs if on btrfs.
* grub-core/Makefile.am (moddep.lst): Make dependent on video.lst.
* grub-core/Makefile.core.def (all_video): New module.
* grub-core/genmoddep.awk: Generate dependency of all_video from
video.lst.
* grub-core/lib/fake_module.c: New file.
* grub-core/normal/main.c (features): Add feature_all_video_module.
* util/grub.d/00_header.in: Define locale_dir based on $prefix and
don't do explicit search again.
insmod all_video in load_video if available.
* docs/grub.texi (Platform-specific limitations): Fix the columen video
on emu. Mention arc and emu as the only platforms without serial
support.
* grub-core/Makefile.core.def (serial): Enable on all terminfomodule and
ieee1275 platforms.
* grub-core/term/efi/serial.c: New file.
* grub-core/term/ieee1275/serial.c: Likewise.
* grub-core/term/serial.c (grub_serial_find): Disable direct port
specification if no ns8250 driver is available.
(grub_cmd_serial): Likewise.
(GRUB_MOD_INIT) [GRUB_MACHINE_IEEE1275]: Init ofserial.
(GRUB_MOD_INIT) [GRUB_MACHINE_EFI]: Init efiserial.
* include/grub/efi/api.h (GRUB_EFI_SERIAL_IO_GUID): New define.
(grub_efi_parity_type_t): New type.
(grub_efi_stop_bits_t): Likewise.
(grub_efi_serial_io_interface): New struct.
* include/grub/serial.h (grub_serial_port): Make 'broken' field
available for all interfaces.
Add EFI and IEEE1275 fields.
(grub_ofserial_init): New proto.
(grub_efiserial_init): Likeiwse.
* util/grub.d/00_header.in: Don't check for the presence of serial
module.
* grub-core/Makefile.core.def (kernel): Add kern/emu/argp_common.c on
emu.
* util/argp_common.c: Rename to ...
* grub-core/kern/emu/argp_common.c: ... this. All users updated.
Add missing includes.
* grub-core/kern/emu/main.c: Convert to argp.
* po/POTFILES.in: Regenerate.
* util/grub-install.in (usage): Make first letter lowcase in messages
for uniformity.
* util/grub-setup.c (options): Likewise.
path for fonts ($prefix/fonts).
* grub-core/kern/corecmd.c (grub_core_cmd_insmod): Unify condition
for checking if string is a path.
* grub-core/normal/main.c (features): Add feature_default_font_path.
* util/grub-mkconfig.in: Skip mangling of GRUB_FONT into GRUB_FONT_PATH.
* util/grub.d/00_header.in: Use default directory if possible.
* util/grub-install.in: Install unicode.pf2.
[GRUB_UTIL]: New function.
(insert_array) [GRUB_UTIL]: Store partmaps.
* include/grub/diskfilter.h (grub_diskfilter_pv) [GRUB_UTIL]: New member
partmaps.
(grub_diskfilter_print_partmap) [GRUB_UTIL]: New proto.
* util/grub-probe.c (probe_partmap): Call grub_diskfilter_print_partmap.
(probe_abstraction): Print diskfilter and not raid.
Reported by: Lennart Sorensen
(add_pixel): Make static.
(add_font): Likewise.
(write_string_section): Make name and str a const char *.
(write_be16_section): Make name a const char *.
(print_glyphs): Make static.
(write_font_ascii_bitmap): Likewise.
(write_font_width_spec): Likewise.
(write_font_pf2): Likewise.
(argp_parser): Remove unused variable.
Respect format security.
(main): Avoid shadowing. Respect format security.
a const char *.
(read_file): Avoid shadowing.
Reuse underlying error message if device open fails.
(cmd_cmp): Respect format security.
(root): Make const char *.
(fstest): Remove args argument and use global copy.
Respect format security.
(argp_parser): Make static.
(main): Make default_root const char *.
(execute_command): Make first argument a const char *.
(fuse_init): Respect format security.
(argp_parser): Make static. Remove unused variable.
(main): Make default_root a const char *.
Respect format security.
* grub-core/disk/cryptodisk.c (cryptodisk_cleanup): Disable for
now to avoid double free.
* grub-core/kern/emu/hostdisk.c (grub_util_biosdisk_dev): Rename to
hostdisk.
* include/grub/disk.h (grub_disk_dev_id): New id HOSTDISK.
* util/grub-probe.c (escape_of_path): Always return a new copy.
(print_full_name): Escape path.
(probe): Don't call grub_util_devname_to_ofpath on NULL.
Fix hints on abstractions.
* util/ieee1275/ofpath.c (grub_util_info) [STANDALONE]: New function.
(OF_PATH_MAX): Removed.
(MAX_DISK_CAT): New const.
(find_obppath): Use allocated rather than preallocated buffer.
Return result. Argument of_path removed. All users updated.
Add missing fdstat.
(xrealpath): New function.
(block_device_get_sysfs_path_and_link): Remove sysfs argument.
Allocate rather than use preallocated buffer. All users updated.
(__of_path_common): Use allocated rather than preallocatecd buffer.
Return result. Argument of_path removed. All users updated.
(vendor_is_ATA): Read only needed part form the file.
(check_sas): Allocate depending on contents rather than fixed.
(main) [STANDALONE]: Handle NULL result.
* grub-core/boot/i386/pc/lnxboot.S: Scan for multiboot signature
rather than hardcoding the address.
* grub-core/boot/i386/pc/startup_raw.S: Add new data field
no_reed_solomon_length.
Move gate_a20 to no-reed-solomon part.
Don't force a particular size of no reed-solomon part.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART):
Removed.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_LENGTH): New define.
* util/grub-setup.c (setup): Read no_rs_length from the image itself.
compact and more efficient code.
* grub-core/kern/list.c (grub_list_push): Moved from here ...
* include/grub/list.h (grub_list_push): ... to here. Set prev.
(grub_list_remove): Moved from here ...
* include/grub/list.h (grub_list_remove): ... here. Use and set prev.
(grub_prio_list_insert): Set prev.
* include/grub/list.h (grub_list): Add prev. All users updated.
(mountinfo_entry): Increase the field size to take escaping into
account.
(find_root_device_from_libzfs): Add one byte to size of strings for
security.
* util/getroot.c [HAVE_LIMITS_H]: Include `<limits.h>'.
(find_root_device_from_libzfs): Add zpool output parser to be used
as fallback when libzfs isn't available.
* grub-core/boot/mips/startup_raw.S: Use GRUB_DECOMPRESSOR_*
* include/grub/offsets.h: Rename decompressor fields from
GRUB_KERNEL_* to GRUB_DECOMPRESSOR_*.
* util/grub-mkimage.c (image_targets): Use new names.
* grub-core/fs/btrfs.c (grub_btrfs_embed) [GRUB_UTIL]: New function.
(grub_btrfs_fs) [GRUB_UTIL]: Set embed.
* include/grub/fs.h (grub_fs) [GRUB_UTIL]: New field embed.
* util/grub-setup.c (setup): Use fs embedding if available.
Add additional sanity check.
* grub-core/kern/i386/coreboot/init.c (grub_machine_init): Use
_edata and _start.
* grub-core/kern/i386/coreboot/startup.S: Move multiboot header after
the small code. It moves it only by few bytes but simplifies the code.
* grub-core/kern/i386/pc/init.c (grub_machine_init): Use _edata and
_start.
* grub-core/kern/i386/pc/startup.S: Use _edata and _start.
(grub_kernel_image_size): Removed.
* grub-core/kern/i386/qemu/startup.S: Use _edata and _start.
(grub_kernel_image_size): Removed.
[APPLE_CC]: Remove apple compiler support. i386-qemu port can't be
compiled with Apple toolchain.
* grub-core/kern/sparc64/ieee1275/crt0.S: Remove leftover fields.
* include/grub/i386/pc/kernel.h (grub_kernel_image_size): Removed.
* include/grub/i386/qemu/kernel.h (grub_kernel_image_size): Removed.
(grub_total_module_size): Likewise.
* include/grub/offsets.h (GRUB_KERNEL_I386_PC_KERNEL_IMAGE_SIZE):
Removed.
(GRUB_KERNEL_I386_PC_COMPRESSED_SIZE): Put it lower.
(GRUB_KERNEL_I386_PC_INSTALL_DOS_PART): Likewise.
(GRUB_KERNEL_I386_PC_INSTALL_BSD_PART): Likewise.
(GRUB_KERNEL_I386_PC_REED_SOLOMON_REDUNDANCY): Likewise.
(GRUB_KERNEL_I386_QEMU_KERNEL_IMAGE_SIZE): Removed.
(GRUB_KERNEL_SPARC64_IEEE1275_KERNEL_IMAGE_SIZE): Likewise.
(GRUB_KERNEL_SPARC64_IEEE1275_COMPRESSED_SIZE): Likewise.
* include/grub/sparc64/ieee1275/kernel.h (grub_kernel_image_size):
Removed.
(grub_total_module_size): Removed.
* util/grub-mkimage.c (image_target_desc): Remove image_size.
(image_targets): Likewise.
Set .compressed_size to no field on sparc.
(generate_image): Remove kernel_image_size handling.
LVM support for FreeBSD and GNU/kFreeBSD.
* util/lvm.c (grub_util_lvm_isvolume): Enable on FreeBSD and
GNU/kFreeBSD.
(LVM_DEV_MAPPER_STRING): Move from here ...
* include/grub/util/lvm.h (LVM_DEV_MAPPER_STRING): ... to here.
* util/getroot.c: Include `<grub/util/lvm.h>'.
(grub_util_get_dev_abstraction): Enable
grub_util_biosdisk_is_present() on FreeBSD and GNU/kFreeBSD.
Check for LVM abstraction on FreeBSD and GNU/kFreeBSD.
(grub_util_get_grub_dev): Replace "/dev/mapper/" with
`LVM_DEV_MAPPER_STRING'. Enable LVM and mdRAID only on platforms that
support it.
* util/grub-setup.c (main): Check for LVM also on FreeBSD and
GNU/kFreeBSD.
* util/grub.d/10_kfreebsd.in: Load `geom_linux_lvm' kernel module
when LVM abstraction is required for ${GRUB_DEVICE}.
Detect LSI MegaRAID SAS (`mfi') devices on GNU/kFreeBSD.
* util/deviceiter.c [__FreeBSD_kernel__] (get_mfi_disk_name): New
function.
[__FreeBSD_kernel__] (grub_util_iterate_devices): Scan for mfi
(/dev/mfid[0-9]+) devices using get_mfi_disk_name().
* grub-core/video/video.c (grub_video_edid_checksum): New function.
(grub_video_edid_preferred_mode): Likewise. Try EDID followed by
the Flat Panel extension, in line with the X.org VESA driver.
* grub-core/video/i386/pc/vbe.c (grub_vbe_bios_get_flat_panel_info):
New function.
(grub_vbe_bios_get_ddc_capabilities): Likewise.
(grub_vbe_bios_read_edid): Likewise.
(grub_vbe_get_preferred_mode): Likewise.
(grub_video_vbe_setup): When the mode is "auto", try to get the
preferred mode from VBE, and use the largest mode that is no larger
than the preferred mode (some BIOSes expose a preferred mode that is
not in their mode list!). If this fails, fall back to 640x480 as a
safe conservative choice.
(grub_video_vbe_get_edid): New function.
(grub_video_vbe_adapter): Add get_edid.
* include/grub/video.h (struct grub_vbe_edid_info): New structure.
(struct grub_video_adapter): Add get_edid.
(grub_video_edid_checksum): Add prototype.
(grub_video_edid_preferred_mode): Likewise.
* include/grub/i386/pc/vbe.h (struct grub_vbe_flat_panel_info): New
structure.
* grub-core/commands/videoinfo.c (print_edid): New function.
(grub_cmd_videoinfo): Print EDID if available.
* util/grub.d/00_header.in (GRUB_GFXMODE): Default to "auto". This
is more appropriate on a wider range of platforms than 640x480.
* docs/grub.texi (Simple configuration): Update GRUB_GFXMODE
documentation.
* grub-core/Makefile.core.def (kernel): Remove kern/emu/getroot.c and
kern/emu/raid.c.
* grub-core/kern/emu/main.c (main): Don't try to guess root device. It's
useless.
* grub-core/kern/emu/misc.c (get_win32_path): Moved from here...
* util/getroot.c (get_win32_path): ... here.
* grub-core/kern/emu/misc.c (fini_libzfs): Moved from here...
* util/getroot.c (fini_libzfs): ... here.
* grub-core/kern/emu/misc.c (grub_get_libzfs_handle): Moved from here...
* util/getroot.c (grub_get_libzfs_handle): ... here.
* grub-core/kern/emu/misc.c (grub_find_zpool_from_dir):
Moved from here...
* util/getroot.c (grub_find_zpool_from_dir): ... here.
* grub-core/kern/emu/misc.c
(grub_make_system_path_relative_to_its_root): Moved from here...
* util/getroot.c (grub_make_system_path_relative_to_its_root): ... here.
* grub-core/kern/emu/getroot.c: Moved from here ...
* util/getroot.c: ... here. All users updated.
* grub-core/kern/emu/raid.c: Moved from here ...
* util/raid.c: ... here. All users updated.
* grub-core/Makefile.core.def (ata_pthru): Removed.
(ahci): New module.
(pata): Likewise.
* grub-core/bus/usb/ohci.c (GRUB_MOD_FINI): Unregister preboot hook
on unload.
* grub-core/commands/hdparm.c (grub_hdparm_do_ata_cmd): Use ATA
readwrite.
(grub_hdparm_do_check_powermode_cmd): Likewise.
(grub_hdparm_do_smart_cmd): Likewise.
(grub_hdparm_set_val_cmd): Likewise.
(grub_cmd_hdparm): Likewise. Check thta we have an ATA device.
* grub-core/disk/ahci.c: New file.
* grub-core/disk/ata.c: Factor out the low-level part into ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/ata_pthru.c: Contents moved to ...
* grub-core/disk/pata.c: ... here.
* grub-core/disk/scsi.c (grub_scsi_names): New array.
(grub_scsi_iterate): Use grub_scsi_names.
(grub_scsi_open): Likewise.
* grub-core/kern/disk.c (grub_disk_ata_pass_through): Removed.
* include/grub/ata.h (grub_ata_commands): Add DMA commands.
(grub_ata_regs_t): New struct.
(grub_disk_ata_pass_through_parms): Likewise.
(grub_ata_device): Renamed to ...
(grub_ata): ... this.
(grub_ata_dev): New struct.
Removed all low-level inline functions.
* include/grub/scsi.h: Add PATA and AHCI subsystems.
(grub_scsi_dev): Removed 'name' and 'id'. Added 'id' parameter to
iterate hooks and open. All users updated.
* util/grub-install.in: Handle AHCI disk module.
Detect `ataraid' devices on GNU/kFreeBSD. Fix for ATA devices using
`ata' driver on kernel of FreeBSD 9.
* util/deviceiter.c [__FreeBSD_kernel__] (get_ada_disk_name)
(get_ataraid_disk_name): New functions.
[__FreeBSD_kernel__] (grub_util_iterate_devices): Scan for ataraid
(/dev/ar[0-9]+) and ada (/dev/ada[0-9]+) devices using
get_ataraid_disk_name() and get_ada_disk_name().
allow both endiannesses coexist.
* configure.ac: proparate target_cpu=mipsel rather than resetting to
mips. All conditions adjusted.
* tests/util/grub-shell-tester.in: Remove gratuitious target_cpu
variable.
* util/grub-install.in: Adjust conditions to take renaming into account.
* util/grub-mkimage.c (image_targets): Likewise. New target
mips-qemu_mips-elf for bigendian mips.
* grub-core/boot/decompressor/none.c (grub_decompress_core): Exit
early if src == dest.
* util/grub-mkimage.c (generate_image): Arange for src == dest if
compression is none.
as opposed to after.
* grub-core/Makefile.core.def (kernel): Increase linking address.
(none_decompress): Likewise.
(xz_decompress): Likewise.
* grub-core/boot/mips/startup_raw.S: Use prewritten uncompression
address.
* grub-core/kern/mips/arc/init.c (grub_machine_init): Handle memory
layout change.
(grub_arch_modules_addr): New function.
* grub-core/kern/mips/init.c (grub_arch_modules_addr): Moved from here...
* grub-core/kern/mips/loongson/init.c (grub_arch_modules_addr): .. here
* grub-core/kern/mips/qemu_mips/init.c (grub_arch_modules_addr): ... and
here.
* grub-core/kern/mips/startup.S (total_size): Rename to ...
(grub_total_modules_size): ... this. Make global.
[GRUB_MACHINE_ARC]: Don't attempt to move modules out of the bss.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_LOONGSON_UNCOMPRESSED_ADDR):
New definition.
(GRUB_KERNEL_MIPS_QEMU_MIPS_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MACHINE_UNCOMPRESSED_ADDR): Likewise.
(GRUB_KERNEL_MIPS_ARC_LINK_ADDR): Increased.
* util/grub-mkimage.c (image_target_desc): New flag
PLATFORM_FLAGS_MODULES_BEFORE_KERNEL.
(image_targets): Set PLATFORM_FLAGS_MODULES_BEFORE_KERNEL on mips-arc.
(generate_image): Handle images with modules before kernel.
and GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT, which replace
GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT (complementing the
existing options which append).
* docs/grub.texi (Simple configuration): Document new options.
Reported by: Ian Jackson. Fixes Debian bug #617538.
* Makefile.util.def (libgrubmods.a): Add dvh.c.
* conf/Makefile.common (CCASFLAGS_PLATFORM): Add -mips3 on all mips
platforms.
* configure.ac: New target mips-arc.
* gentpl.py: Likewise.
* grub-core/Makefile.am: Likewise.
* grub-core/Makefile.core.def: Likewise.
(xz_decompress): Remove -D GRUB_MACHINE_LINK_ADDR.
(none_decompress): Likewise.
(lsdev): New module.
(datetime): Use lib/arc/datetime.c on ARC.
(part_dvh): New module.
* grub-core/commands/arc/lsdev.c: New file.
* grub-core/disk/arc/arcdisk.c: Likewise.
* grub-core/kern/mips/arc/init.c: Likewise.
* grub-core/kern/mips/cache_flush.S: Don't flush non 4-byte
aligned addresses.
* grub-core/kern/mips/dl.c (grub_arch_dl_check_header): Fix bigendian
support.
(grub_arch_dl_relocate_symbols): Likewise.
* grub-core/kern/mips/loongson/init.c (grub_get_rtc): Moved from here...
* grub-core/kern/mips/init.c (grub_get_rtc): ... here.
* grub-core/kern/mips/startup.S (grub_arch_cpuclock): Have on all
platforms.
* grub-core/lib/arc/datetime.c: New file.
* grub-core/loader/mips/linux.c: Always include time.h. Don't include
pci.h on non-loongson.
(envp_off) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove.
(grub_linux_boot): Set unused registers to 0.
(grub_cmd_linux) [!GRUB_MACHINE_MIPS_LOONGSON]: Remove envp.
* grub-core/mmap/mips/loongson/uppermem.c: Moved from here ...
* grub-core/mmap/mips/uppermem.c: ...here.
* grub-core/partmap/dvh.c: New file.
* grub-core/term/arc/console.c: Likewise.
* grub-core/term/terminfo.c (ANSI_C0_STR): New const.
(grub_terminfo_set_current): Add terminal "arc".
(grub_terminfo_readkey): Support ARC sequences.
* include/grub/arc/arc.h: New file.
* include/grub/arc/console.h: Likewise.
* include/grub/disk.h (grub_disk_dev_id): Add
GRUB_DISK_DEVICE_ARCDISK_ID.
* include/grub/mips/arc/kernel.h: New file.
* include/grub/mips/arc/memory.h: Likewise.
* include/grub/mips/arc/time.h: Likewise.
* include/grub/mips/loongson/kernel.h (grub_halt): Moved from here ...
* include/grub/mips/kernel.h (grub_halt): ... here.
* include/grub/mips/loongson.h (GRUB_CPU_REGISTER_WRAP): Moved from
here...
* include/grub/mips/mips.h (GRUB_CPU_REGISTER_WRAP): ... here.
(GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): Moved from here ...
* include/grub/mips/mips.h (GRUB_CPU_LOONGSON_COP0_TIMER_COUNT): .. here
* include/grub/mips/loongson/kernel.h (grub_reboot): Removed redundant
proto.
* include/grub/mips/loongson/memory.h (GRUB_ARCH_LOWMEMVSTART): Moved
from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMVSTART): ... here.
(GRUB_ARCH_LOWMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMPSTART): ... here.
(GRUB_ARCH_LOWMEMMAXSIZE): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_LOWMEMMAXSIZE): ... here.
(GRUB_ARCH_HIGHMEMPSTART): Moved from here ...
* include/grub/mips/memory.h (GRUB_ARCH_HIGHMEMPSTART): ... here.
(grub_phys_addr_t): Moved from here ...
* include/grub/mips/memory.h (grub_phys_addr_t): ... here.
(grub_vtop): Moved from here ...
* include/grub/mips/memory.h (grub_vtop): ... here.
(grub_map_memory): Moved from here ...
* include/grub/mips/memory.h (grub_map_memory): ... here.
(grub_unmap_memory): Moved from here ...
* include/grub/mips/memory.h (grub_unmap_memory): ... here.
(grub_machine_mmap_iterate): Moved from here ...
* include/grub/mips/memory.h (grub_machine_mmap_iterate): ... here.
(grub_mmap_get_lower): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_lower): ... here.
(grub_mmap_get_upper): Moved from here ...
* include/grub/mips/memory.h (grub_mmap_get_upper): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_get_rtc): Moved from
here ...
* include/grub/mips/time.h (grub_get_rtc): ... here.
* include/grub/mips/loongson/time.h (grub_arch_cpuclock): Moved from
here ...
* include/grub/mips/time.h (grub_arch_cpuclock): ... here.
* include/grub/mips/loongson/time.h (grub_cpu_idle): Moved from
here ...
* include/grub/mips/time.h (grub_cpu_idle): ... here.
* include/grub/offsets.h (GRUB_KERNEL_MIPS_ARC_LINK_ADDR): New
definition.
(GRUB_KERNEL_MIPS_ARC_LINK_ALIGN): Likewise.
(GRUB_KERNEL_MIPS_ARC_COMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_UNCOMPRESSED_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_TOTAL_MODULE_SIZE): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX): Likewise.
(GRUB_KERNEL_MIPS_ARC_PREFIX_END): Likewise.
(GRUB_KERNEL_MIPS_ARC_MOD_ALIGN): Likewise.
(GRUB_MACHINE_LINK_ADDR): Likewise.
* include/grub/terminfo.h (GRUB_TERMINFO_READKEY_MAX_LEN): Increased
to 6.
* util/grub-install.in: Run dvhtool on ARC.
* util/grub-mkimage.c (image_targets): Add mips-arc.
* Makefile.util.def (libgrubmods.a): Add grub-core/kern/ia64/dl_helper.c
* configure.ac: Add ia64-efi target.
Probe for __ia64_trampoline, __udivsi3, __umoddi3, __udivdi3,
__divsi3, __modsi3, __umodsi3, __moddi3 and __divdi3 symbols.
* gentpl.py: Add ia64_efi platform.
Rename x86_efi to efi and Add ia64-efi. All users updated.
* grub-core/Makefile.am: Set KERNEL_HEADER_FILES for ia64-efi.
* grub-core/Makefile.core.def (kernel.img): Add compile flags for ia64.
Remove kern/generic/rtc_get_time_ms.c on EFI.
Add kern/ia64/efi/startup.S, kern/ia64/efi/init.c, kern/ia64/dl.c,
kern/ia64/dl_helper.c on ia64-efi.
Add kern/emu/cache.c on emu.
(linux): Use on loader/ia64/efi/linux.c on ia64.
* grub-core/gensymlist.sh (grub_register_exported_symbols): Check
whether symbol is a function.
* grub-core/kern/dl.c [GRUB_MACHINE_EMU]: Include sys/mman.h.
(grub_symbol): New field 'isfunc'.
(grub_dl_resolve_symbol): Return whole symbol rather than just address.
(grub_dl_register_symbol): New argument 'isfunc'. All users updated.
(grub_dl_load_segments): Place all sections into the same region.
[__ia64__]: Create trampolines and got.
[GRUB_MACHINE_EMU]: Call mprotect.
(grub_dl_resolve_symbols): Resolve symbol type as well.
[__ia64__]: Create function descriptors.
* grub-core/kern/efi/efi.c (grub_get_rtc): Renamed to ...
(grub_rtc_get_time_ms): ... this. Expressions simplified.
(grub_get_rtc): New function.
* grub-core/kern/emu/cache.c [__ia64__]: New file.
* grub-core/kern/emu/cache.S: Renamed to ...
* grub-core/kern/emu/cache_s.S: ... this.
[__ia64__]: Add a nop.
* grub-core/kern/emu/full.c (grub_arch_dl_get_tramp_got_size)
[__ia64__]: New function.
* grub-core/kern/emu/lite.c [__ia64__]: Include ../ia64/dl.c.
* grub-core/kern/ia64/dl.c: New file.
* grub-core/kern/ia64/dl_helper.c: Likewise.
* grub-core/kern/ia64/efi/init.c: New file.
* grub-core/kern/ia64/efi/startup.S: Likewise.
* grub-core/lib/efi/halt.c [__ia64__]: Don't try acpi.
* grub-core/lib/ia64/longjmp.S: New file (from glibc).
* grub-core/lib/ia64/setjmp.S: Likewise (from glibc).
* grub-core/lib/setjmp.S [__ia64__]: Include ./ia64/setjmp.S.
* grub-core/loader/ia64/efi/linux.c: New file.
* include/grub/dl.h (GRUB_MOD_NAME): Redefined using C rather than asm.
(GRUB_MOD_DEP): Likewise.
(grub_dl) [__ia64__]: New fields got and tramp.
(grub_dl): New field 'base'.
(grub_dl_register_symbol): New argument isfunc. All users updated.
(GRUB_IA64_DL_TRAMP_ALIGN): New definition.
(GRUB_IA64_DL_TRAMP_SIZE): Likewise.
(GRUB_IA64_DL_GOT_ALIGN): Likewise.
(grub_ia64_dl_get_tramp_got_size): New proto.
(GRUB_ARCH_DL_TRAMP_ALIGN) [__ia64__]: Likewise
(GRUB_ARCH_DL_GOT_ALIGN) [__ia64__]: Likewise
(grub_arch_dl_get_tramp_got_size) [__ia64__]: Likewise
* include/grub/efi/api.h: Skip call wrappers on ia64.
* include/grub/efi/pe32.h (GRUB_PE32_MACHINE_IA64): New definition.
* include/grub/efi/time.h (GRUB_TICKS_PER_SECOND): Change to 1000.
* include/grub/elf.h (ELF_ST_INFO): New definition.
* include/grub/ia64/efi/kernel.h: New file.
* include/grub/ia64/efi/memory.h: Likewise.
* include/grub/ia64/efi/time.h: Likewise.
* include/grub/ia64/kernel.h: Likewise.
* include/grub/ia64/setjmp.h: Likewise (from glibc).
* include/grub/ia64/time.h: New file.
* include/grub/ia64/types.h: Likewise.
* include/grub/libgcc.h (__udivsi3, __umodsi3, __umoddi3, __udivdi3,
__moddi3, __divdi3, __divsi3, __modsi3, __ia64_trampoline):
New protos.
* include/grub/offsets.h (GRUB_KERNEL_IA64_EFI_PREFIX): New definition.
(GRUB_KERNEL_IA64_EFI_PREFIX_END): Likewise.
* include/grub/types.h (PRIxGRUB_ADDR): Likewise.
* util/grub-mkimage.c (image_target_desc): New field pe_target.
All users updated.
(EFI64_HEADER_SIZE): New definition. All users updated.
(image_targets): Add ia64-efi.
* util/grub-mkimagexx.c (relocate_symbols): New arguments jumpers and
jumpers_addr. All users updated.
Create function descriptors.
(count_funcs): New function.
(unaligned_uint32): New struct.
(MASK20): New definition.
(MASK19): Likewise.
(MASKF21): Likewise.
(add_value_to_slot_20b): New function.
(add_value_to_slot_21_real): Likewise.
(add_value_to_slot_21): Likewise.
(ia64_kernel_trampoline): New struct.
(nopm): New variable.
(jump): Likewise.
(make_trampoline): New function.
(relocate_addresses): Handle ia64.
(make_reloc_section): Likewise.
(load_image): Likewise.
Also-By: Robert Millan <rmh.grub@aybabtu.com>
Also-By: Vladimir Serbinenko <phcoder@gmail.com>
* configure.ac: Rename yeeloong platform to loongson. All users updated.
* grub-core/Makefile.core.def (fwstart_fuloong): New image.
* grub-core/boot/mips/loongson/fuloong.S: New file.
* grub-core/boot/mips/loongson/fwstart.S: Wait for CS5536 to come up.
Explicitly init CS5536.
[FULOONG]: Don't use serial until CS5536 is available.
Set GPIO based on dumps.
(serial_hw_init) [FULOONG]: Handle CS5536 parts.
[FULOONG]: Handle GPIO and memory controller differences.
Parse machine type in $a2.
* grub-core/boot/mips/startup_raw.S: Determine and save the
architecture.
* grub-core/bus/cs5536.c (gpiodump): Move to fwstart.S.
(grub_cs5536_init_geode): Remove gpio part. Conditionalise DIVIL
init on architecture type.
* grub-core/kern/mips/loongson/init.c (grub_machine_init): Init
SIS315E. Don't init at_keyboard on fuloong.
(grub_halt): Support Fuloong.
* grub-core/kern/mips/startup.S [LOONGSON]: Save $s7.
* grub-core/loader/mips/linux.c (LOONGSON_MACHTYPE): Removed.
(loongson_machtypes): New array.
(grub_cmd_linux) [GRUB_MACHINE_MIPS_LOONGSON]: Pass the right machine
type.
* grub-core/term/ns8250.c (serial_get_divisor): New parameter port and
config. All users updated. Handle CS5536 serial.
* grub-core/term/serial.c (grub_serial_register): Conditionalise
default port on machine type. Register serial as inactive.
* grub-core/video/sis315pro.c: New file.
* include/grub/cs5536.h (GRUB_CS5536_MSR_MAILBOX_CONFIG_ENABLED): New
definition.
(GRUB_CS5536_MSR_MAILBOX_CONFIG): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART1_COM1): Likewise.
(GRUB_CS5536_MSR_DIVIL_LEG_IO_UART2_COM3): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART1_CONF): Likewise.
(GRUB_CS5536_MSR_DIVIL_UART2_CONF): Likewise.
* include/grub/mips/loongson.h (GRUB_CPU_LOONGSON_SHUTDOWN_GPIO): Rename
to ...
(GRUB_CPU_YEELOONG_SHUTDOWN_GPIO): ... this.
* include/grub/mips/loongson/kernel.h (GRUB_ARCH_MACHINE_YEELOONG): New
definition.
(GRUB_ARCH_MACHINE_FULOONG): Likewise.
(grub_arch_machine): New extern var.
* include/grub/mips/loongson/serial.h
(GRUB_MACHINE_SERIAL_DIVISOR_115200): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0_DIVISOR_115200): ... this.
(GRUB_MACHINE_SERIAL_PORT): Renamed to ...
(GRUB_MACHINE_SERIAL_PORT0): ... this.
(GRUB_MACHINE_SERIAL_PORT2_DIVISOR_115200): New definition.
(GRUB_MACHINE_SERIAL_PORT1): Likewise.
(GRUB_MACHINE_SERIAL_PORT2): Likewise.
(GRUB_MACHINE_SERIAL_PORTS): Include ports 1 and 2.
* include/grub/term.h (grub_term_register_input_inactive): New inline
function.
(grub_term_register_output_inactive): Likewise.
* include/grub/video.h (grub_video_driver_id): New value
GRUB_VIDEO_DRIVER_SIS315PRO.
* util/grub-mkimage.c (image_target_desc): Rename name to dirname.
New field "names". All users updated.
New field value IMAGE_FULOONG_FLASH.
(generate_image): USe separate fwstart hashes for yeeloong and fuloong.
* util/grub-pe2elf.c (MODLICENSE_SECTION): New definition. All following
sections shifted.
(insert_string): Make argument const char * instead of char *.
(write_section_data): Handle long section names.
Handle module_license.
New function.
(grub_util_biosdisk_close): Use grub_util_biosdisk_flush.
* include/grub/emu/hostdisk.h (grub_util_biosdisk_flush): New proto.
* util/grub-setup.c (setup): Use grub_util_biosdisk_flush.
